Allow the use of other transport classes when handling a backward
direction RPC call.
Signed-off-by: NChuck Lever <chuck.lever@oracle.com>
Reviewed-by: NSagi Grimberg <sagig@mellanox.com>
Tested-By: NDevesh Sharma <devesh.sharma@avagotech.com>
Signed-off-by: NAnna Schumaker <Anna.Schumaker@Netapp.com>

In later patches, we'll want to be able to allocate and free svc_rqst
structures without monkeying with the serv->sv_nrthreads refcount.

Factor those pieces out of their respective functions.
Signed-off-by: NShirley Ma <shirley.ma@oracle.com>
Acked-by: NJeff Layton <jlayton@primarydata.com>
Tested-by: NShirley Ma <shirley.ma@oracle.com>
Signed-off-by: NJ. Bruce Fields <bfields@redhat.com>

In later patches, we're going to need to allow code external to svc.c
to figure out what pool_mode is in use. Move these definitions into
svc.h to prepare for that.

Also, make the svc_pool_map object available and exported so that other
modules can peek in there to get insight into what pool mode is in use.
Likewise, export svc_pool_map_get/put function to make it safe to do so.
Signed-off-by: NShirley Ma <shirley.ma@oracle.com>
Acked-by: NJeff Layton <jlayton@primarydata.com>
Tested-by: NShirley Ma <shirley.ma@oracle.com>
Signed-off-by: NJ. Bruce Fields <bfields@redhat.com>

...not technically an operation, but it's more convenient and cleaner
to pass the module pointer in this struct.
Signed-off-by: NShirley Ma <shirley.ma@oracle.com>
Acked-by: NJeff Layton <jlayton@primarydata.com>
Tested-by: NShirley Ma <shirley.ma@oracle.com>
Signed-off-by: NJ. Bruce Fields <bfields@redhat.com>

Since we now have a container for holding svc_serv operations, move the
sv_function into it as well.
Signed-off-by: NShirley Ma <shirley.ma@oracle.com>
Acked-by: NJeff Layton <jlayton@primarydata.com>
Tested-by: NShirley Ma <shirley.ma@oracle.com>
Signed-off-by: NJ. Bruce Fields <bfields@redhat.com>

In later patches we'll need to abstract out more operations on a
per-service level, besides sv_shutdown and sv_function.

Declare a new svc_serv_ops struct to hold these operations, and move
sv_shutdown into this struct.
Signed-off-by: NShirley Ma <shirley.ma@oracle.com>
Acked-by: NJeff Layton <jlayton@primarydata.com>
Tested-by: NShirley Ma <shirley.ma@oracle.com>
Signed-off-by: NJ. Bruce Fields <bfields@redhat.com>

We need to allow the server to send a new request immediately after we've
replied to the previous one. Right now, there is a window between the
send and the release of the old request in rpc_put_task(), where the
server could send us a new backchannel RPC call, and we have no
request to service it.
Signed-off-by: NTrond Myklebust <trond.myklebust@primarydata.com>

Signed-off-by: NTrond Myklebust <trond.myklebust@primarydata.com>

Clean up.
Signed-off-by: NChuck Lever <chuck.lever@oracle.com>
Signed-off-by: NJ. Bruce Fields <bfields@redhat.com>

Clean up: Merge bc_send() into bc_svc_process().

Note: even thought this touches svc.c, it is a client-side change.
Signed-off-by: NChuck Lever <chuck.lever@oracle.com>
Signed-off-by: NTrond Myklebust <trond.myklebust@primarydata.com>

The BKL is completely out of the picture in the lockd and sunrpc code
these days. Update the antiquated comments that refer to it.
Signed-off-by: NJeff Layton <jlayton@primarydata.com>
Signed-off-by: NJ. Bruce Fields <bfields@redhat.com>

Testing has shown that the pool->sp_lock can be a bottleneck on a busy
server. Every time data is received on a socket, the server must take
that lock in order to dequeue a thread from the sp_threads list.

Address this problem by eliminating the sp_threads list (which contains
threads that are currently idle) and replacing it with a RQ_BUSY flag in
svc_rqst. This allows us to walk the sp_all_threads list under the
rcu_read_lock and find a suitable thread for the xprt by doing a
test_and_set_bit.

Note that we do still have a potential atomicity problem however with
this approach.  We don't want svc_xprt_do_enqueue to set the
rqst->rq_xprt pointer unless a test_and_set_bit of RQ_BUSY returned
zero (which indicates that the thread was idle). But, by the time we
check that, the bit could be flipped by a waking thread.

To address this, we acquire a new per-rqst spinlock (rq_lock) and take
that before doing the test_and_set_bit. If that returns false, then we
can set rq_xprt and drop the spinlock. Then, when the thread wakes up,
it must set the bit under the same spinlock and can trust that if it was
already set then the rq_xprt is also properly set.

With this scheme, the case where we have an idle thread no longer needs
to take the highly contended pool->sp_lock at all, and that removes the
bottleneck.

That still leaves one issue: What of the case where we walk the whole
sp_all_threads list and don't find an idle thread? Because the search is
lockess, it's possible for the queueing to race with a thread that is
going to sleep. To address that, we queue the xprt and then search again.

If we find an idle thread at that point, we can't attach the xprt to it
directly since that might race with a different thread waking up and
finding it.  All we can do is wake the idle thread back up and let it
attempt to find the now-queued xprt.
Signed-off-by: NJeff Layton <jlayton@primarydata.com>
Tested-by: NChris Worley <chris.worley@primarydata.com>
Signed-off-by: NJ. Bruce Fields <bfields@redhat.com>

...also make the manipulation of sp_all_threads list use RCU-friendly
functions.
Signed-off-by: NJeff Layton <jlayton@primarydata.com>
Tested-by: NChris Worley <chris.worley@primarydata.com>
Signed-off-by: NJ. Bruce Fields <bfields@redhat.com>

Currently all svc_create callers pass in NULL for the shutdown parm,
which then gets fixed up to be svc_rpcb_cleanup if the service uses
rpcbind.

Simplify this by instead having the the only caller that requires it
(lockd) pass in svc_rpcb_cleanup and get rid of the special casing.
Signed-off-by: NJeff Layton <jlayton@primarydata.com>
Signed-off-by: NJ. Bruce Fields <bfields@redhat.com>

Signed-off-by: NJeff Layton <jlayton@primarydata.com>
Signed-off-by: NJ. Bruce Fields <bfields@redhat.com>

Signed-off-by: NJeff Layton <jlayton@primarydata.com>
Signed-off-by: NJ. Bruce Fields <bfields@redhat.com>

Signed-off-by: NJeff Layton <jlayton@primarydata.com>
Signed-off-by: NJ. Bruce Fields <bfields@redhat.com>

Currently, it leaks when the allocation fails.
Signed-off-by: NJeff Layton <jlayton@primarydata.com>
Signed-off-by: NJ. Bruce Fields <bfields@redhat.com>

It's always set to whatever CONFIG_SUNRPC_DEBUG is, so just use that.
Signed-off-by: NJeff Layton <jlayton@primarydata.com>
Signed-off-by: NTrond Myklebust <trond.myklebust@primarydata.com>

...just around svc_send, svc_recv and svc_process for now.
Signed-off-by: NJeff Layton <jlayton@primarydata.com>
Signed-off-by: NTrond Myklebust <trond.myklebust@primarydata.com>

The m->pool_to[] array has "maxpools" number of elements.  It's
allocated in svc_pool_map_alloc_arrays() which we called earlier in the
function.  This test should be >= instead of >.
Signed-off-by: NDan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: NJ. Bruce Fields <bfields@redhat.com>

We're always _only_ waking up tasks from within the sp_threads list, so
we know that they are enqueued and alive. The rq_wait waitqueue is just
a distraction with extra atomic semantics.
Signed-off-by: NTrond Myklebust <trond.myklebust@primarydata.com>
Signed-off-by: NJ. Bruce Fields <bfields@redhat.com>

rq_usedeferral and rq_splice_ok are used as 0 and 1, just defined to bool.
Signed-off-by: NKinglong Mee <kinglongmee@gmail.com>
Signed-off-by: NJ. Bruce Fields <bfields@redhat.com>

NFSv4 clients can contact port 2049 directly instead of needing the
portmapper.

Therefore a failure to register to the portmapper when starting an
NFSv4-only server isn't really a problem.

But Gareth Williams reports that an attempt to start an NFSv4-only
server without starting portmap fails:

  #rpc.nfsd -N 2 -N 3
  rpc.nfsd: writing fd to kernel failed: errno 111 (Connection refused)
  rpc.nfsd: unable to set any sockets for nfsd

Add a flag to svc_version to tell the rpc layer it can safely ignore an
rpcbind failure in the NFSv4-only case.
Reported-by: NGareth Williams <gareth@garethwilliams.me.uk>
Reviewed-by: NChuck Lever <chuck.lever@oracle.com>
Signed-off-by: NKinglong Mee <kinglongmee@gmail.com>
Signed-off-by: NJ. Bruce Fields <bfields@redhat.com>

Signed-off-by: NWeng Meiling <wengmeiling.weng@huawei.com>
Signed-off-by: NJ. Bruce Fields <bfields@redhat.com>

Calling kthread_run with a single name parameter causes it to be handled
as a format string. Many callers are passing potentially dynamic string
content, so use "%s" in those cases to avoid any potential accidents.
Signed-off-by: NKees Cook <keescook@chromium.org>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

Rewrite server shutdown to remove the assumption that there are no
longer any threads running (no longer true, for example, when shutting
down the service in one network namespace while it's still running in
others).

Do that by doing what we'd do in normal circumstances: just CLOSE each
socket, then enqueue it.

Since there may not be threads to handle the resulting queued xprts,
also run a simplified version of the svc_recv() loop run by a server to
clean up any closed xprts afterwards.

Cc: stable@kernel.org
Tested-by: NJason Tibbitts <tibbs@math.uh.edu>
Tested-by: NPaweł Sikora <pawel.sikora@agmk.net>
Acked-by: NStanislav Kinsbursky <skinsbursky@parallels.com>
Signed-off-by: NJ. Bruce Fields <bfields@redhat.com>

Signed-off-by: NJ. Bruce Fields <bfields@redhat.com>

It may be a matter of personal taste, but I find this makes the code
clearer.
Signed-off-by: NJ. Bruce Fields <bfields@redhat.com>

This is a cleanup patch.
Signed-off-by: NStanislav Kinsbursky <skinsbursky@parallels.com>
Signed-off-by: NJ. Bruce Fields <bfields@redhat.com>

In general I'd rather random bad behavior on the network won't trigger a
printk.
Signed-off-by: NJ. Bruce Fields <bfields@redhat.com>

Instead of calling BUG_ON(), do a WARN_ON_ONCE() and return -EINVAL.
Signed-off-by: NWeston Andros Adamson <dros@netapp.com>
Signed-off-by: NTrond Myklebust <Trond.Myklebust@netapp.com>

Replace two bounds checking BUG_ON() calls with WARN_ON_ONCE() and resetting
the requested size to RPCSVC_MAXPAGES.
Signed-off-by: NWeston Andros Adamson <dros@netapp.com>
Signed-off-by: NTrond Myklebust <Trond.Myklebust@netapp.com>

Replace BUG_ON() with a WARN() and early return.
Signed-off-by: NWeston Andros Adamson <dros@netapp.com>
Signed-off-by: NTrond Myklebust <Trond.Myklebust@netapp.com>

The idea is to separate service destruction and per-net operations,
because these are two different things and the mix looks ugly.

Notes:

1) For NFS server this patch looks ugly (sorry for that). But these
place will be rewritten soon during NFSd containerization.

2) LockD per-net counter increase int lockd_up() was moved prior to
make_socks() to make lockd_down_net() call safe in case of error.
Signed-off-by: NStanislav Kinsbursky <skinsbursky@parallels.com>
Signed-off-by: NJ. Bruce Fields <bfields@redhat.com>

This new routine is responsible for service registration in a specified
network context.

The idea is to separate service creation from per-net operations.

Note also: since registering service with svc_bind() can fail, the
service will be destroyed and during destruction it will try to
unregister itself from rpcbind. In this case unregistration has to be
skipped.
Signed-off-by: NStanislav Kinsbursky <skinsbursky@parallels.com>
Signed-off-by: NJ. Bruce Fields <bfields@redhat.com>

If the call to svc_process_common() fails, then the request
needs to be freed before we can exit bc_svc_process.
Signed-off-by: NTrond Myklebust <Trond.Myklebust@netapp.com>
Cc: stable@vger.kernel.org

Standardize the net core ratelimited logging functions.

Coalesce formats, align arguments.
Change a printk then vprintk sequence to use printf extension %pV.
Signed-off-by: NJoe Perches <joe@perches.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

This patch introduces per-net Lockd initialization and destruction routines.
The logic is the same as in global Lockd up and down routines. Probably the
solution is not the best one. But at least it looks clear.
So per-net "up" routine are called only in case of lockd is running already. If
per-net resources are not allocated yet, then service is being registered with
local portmapper and lockd sockets created.
Per-net "down" routine is called on every lockd_down() call in case of global
users counter is not zero.
Signed-off-by: NStanislav Kinsbursky <skinsbursky@parallels.com>
Signed-off-by: NTrond Myklebust <Trond.Myklebust@netapp.com>

This function is enough for releasing resources, allocated for network
namespace context, in case of sharing service between them.
IOW, each service "user" (LockD, NFSd, etc), which wants to share service
between network namespaces, have to release related resources by the function,
introduced in this patch, instead of performing service shutdown (of course in
case the service is shared already to the moment of release).
Signed-off-by: NStanislav Kinsbursky <skinsbursky@parallels.com>
Signed-off-by: NTrond Myklebust <Trond.Myklebust@netapp.com>