In case TX fault is detected on Fiber PHYs, declare the link as down until TX fault is gone.
Signed-off-by: NYaniv Rosner <yanivr@broadcom.com>
Signed-off-by: NEilon Greenstein <eilong@broadcom.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Change return status from u8 to int.
Signed-off-by: NYaniv Rosner <yanivr@broadcom.com>
Signed-off-by: NEilon Greenstein <eilong@broadcom.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Display the current media type connected to the port in ethtool.
Signed-off-by: NYaniv Rosner <yanivr@broadcom.com>
Signed-off-by: NEilon Greenstein <eilong@broadcom.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Add support for new phy BCM8722.
Signed-off-by: NYaniv Rosner <yanivr@broadcom.com>
Signed-off-by: NEilon Greenstein <eilong@broadcom.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Instead of failing the init/probe code in the driver fallback to the older opcode to ensure
the driver is loaded thereby enabling users to upgrade the f/w to whatever version is required.
Signed-off-by: NSomnath Kotur <somnath.kotur@emulex.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

This reverts commit e5cb966c.

It causes new build regressions with gcc-4.2 which is
pretty common on non-x86 platforms.
Reported-by: NJames Bottomley <James.Bottomley@HansenPartnership.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

catc_ctrl_run() calls usb_submit_urb() with GFP_KERNEL, while it is called from
catc_ctrl_async() and catc_ctrl_done() with catc->ctrl_lock spinlock held.

The patch replaces GFP_KERNEL with GFP_ATOMIC.

Found by Linux Driver Verification project (linuxtesting.org).
Signed-off-by: NAlexey Khoroshilov <khoroshilov@ispras.ru>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

This patch fixes a driver crash during packet reception due to not enough
bytes allocated in the skb. Since the loop reads out 4 bytes at a time, we
need to allow for up to 3 bytes of slack space.
Signed-off-by: NDennis Aberilla <denzzzhome@yahoo.com>
Signed-off-by: NDavid S. Miller <davem@zippy.davemloft.net>

Ask for delayed callbacks on TX ring full, to give the
other side more of a chance to make progress.
Signed-off-by: NMichael S. Tsirkin <mst@redhat.com>
Acked-by: NDavid S. Miller <davem@davemloft.net>
Signed-off-by: NRusty Russell <rusty@rustcorp.com.au>

Add an API that tells the other side that callbacks
should be delayed until a lot of work has been done.
Implement using the new event_idx feature.

Note: it might seem advantageous to let the drivers
ask for a callback after a specific capacity has
been reached. However, as a single head can
free many entries in the descriptor table,
we don't really have a clue about capacity
until get_buf is called. The API is the simplest
to implement at the moment, we'll see what kind of
hints drivers can pass when there's more than one
user of the feature.
Signed-off-by: NMichael S. Tsirkin <mst@redhat.com>
Signed-off-by: NRusty Russell <rusty@rustcorp.com.au>

Support the new event index feature. When acked,
utilize it to reduce the # of interrupts sent to the guest.
Signed-off-by: NMichael S. Tsirkin <mst@redhat.com>
Signed-off-by: NRusty Russell <rusty@rustcorp.com.au>

Support for the new event idx feature:
1. When enabling interrupts, publish the current avail index
   value to the host to get interrupts on the next update.
2. Use the new avail_event feature to reduce the number
   of exits from the guest.

Simple test with the simulator:

[virtio]# time ./virtio_test
spurious wakeus: 0x7

real    0m0.169s
user    0m0.140s
sys     0m0.019s
[virtio]# time ./virtio_test --no-event-idx
spurious wakeus: 0x11

real    0m0.649s
user    0m0.295s
sys     0m0.335s
Signed-off-by: NMichael S. Tsirkin <mst@redhat.com>
Signed-off-by: NRusty Russell <rusty@rustcorp.com.au>

The virtio balloon driver has a VIRTIO_BALLOON_F_MUST_TELL_HOST
feature bit.  Whenever the bit is set, the guest kernel must
always tell the host before we free pages back to the allocator.
Without this feature, we might free a page (and have another
user touch it) while the hypervisor is unprepared for it.

But, if the bit is _not_ set, we are under no obligation to
reverse the order; we're under no obligation to do _anything_.
As of now, qemu-kvm defines the bit, but doesn't set it.

This patch makes the "tell host first" logic the only case.  This
should make everybody happy, and reduce the amount of untested or
untestable code in the kernel.

This _also_ means that we don't have to preserve a pfn list
after the pages are freed, which should let us get rid of some
temporary storage (vb->pfns) eventually.
Signed-off-by: NDave Hansen <dave@linux.vnet.ibm.com>
Signed-off-by: NRusty Russell <rusty@rustcorp.com.au>

That's already been done by the virtio infrastructure before the probe
function is called.

Reported-by: alexey.kardashevskiy@au1.ibm.com
Acked-by: NAmit Shah <amit.shah@redhat.com>
Tested-by: NAmit Shah <amit.shah@redhat.com>
Signed-off-by: NRusty Russell <rusty@rustcorp.com.au>

It is easier to figure out the context by reading SCSI_SENSE_BUFFERSIZE
instead of plain '96'.
Signed-off-by: NLiu Yuan <tailai.ly@taobao.com>
Signed-off-by: NRusty Russell <rusty@rustcorp.com.au>

Wire up the virtio_driver config_changed method to get notified about
config changes raised by the host.  For now we just re-read the device
size to support online resizing of devices, but once we add more
attributes that might be changeable they could be added as well.

Note that the config_changed method is called from irq context, so
we'll have to use the workqueue infrastructure to provide us a proper
user context for our changes.
Signed-off-by: NChristoph Hellwig <hch@lst.de>
Signed-off-by: NRusty Russell <rusty@rustcorp.com.au>

We had a few drivers move from arch/arm into drivers/gpio, but they
don't actually compile without the ARM platform headers etc.  As a
result they were messing up allyesconfig on x86.

Make them depend on ARM.
Reported-by: NIngo Molnar <mingo@elte.hu>
Cc: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

Return client directly from dm_kcopyd_client_create, not through a
parameter, making it consistent with dm_io_client_create.
Signed-off-by: NMikulas Patocka <mpatocka@redhat.com>
Signed-off-by: NAlasdair G Kergon <agk@redhat.com>

Reserve just the minimum of pages needed to process one job.

Because we allocate pages from page allocator, we don't need to reserve
a large number of pages.  The maximum job size is SUB_JOB_SIZE and we
calculate the number of reserved pages based on this.
Signed-off-by: NMikulas Patocka <mpatocka@redhat.com>
Signed-off-by: NAlasdair G Kergon <agk@redhat.com>

Replace the arbitrary calculation of an initial io struct mempool size
with a constant.

The code calculated the number of reserved structures based on the request
size and used a "magic" multiplication constant of 4.  This patch changes
it to reserve a fixed number - itself still chosen quite arbitrarily.
Further testing might show if there is a better number to choose.

Note that if there is no memory pressure, we can still allocate an
arbitrary number of "struct io" structures.  One structure is enough to
process the whole request.
Signed-off-by: NMikulas Patocka <mpatocka@redhat.com>
Signed-off-by: NAlasdair G Kergon <agk@redhat.com>

This patch changes dm-kcopyd so that it allocates pages from the main
page allocator with __GFP_NOWARN | __GFP_NORETRY flags (so that it can
fail in case of memory pressure). If the allocation fails, dm-kcopyd
allocates pages from its own reserve.
Signed-off-by: NMikulas Patocka <mpatocka@redhat.com>
Signed-off-by: NAlasdair G Kergon <agk@redhat.com>

Introduce a parameter for gfp flags to alloc_pl() for use in following
patches.
Signed-off-by: NMikulas Patocka <mpatocka@redhat.com>
Signed-off-by: NAlasdair G Kergon <agk@redhat.com>

Remove the spinlock protecting the pages allocation.  The spinlock is only
taken on initialization or from single-threaded workqueue.  Therefore, the
spinlock is useless.

The spinlock is taken in kcopyd_get_pages and kcopyd_put_pages.

kcopyd_get_pages is only called from run_pages_job, which is only
called from process_jobs called from do_work.

kcopyd_put_pages is called from client_alloc_pages (which is initialization
function) or from run_complete_job. run_complete_job is only called from
process_jobs called from do_work.

Another spinlock, kc->job_lock is taken each time someone pushes or pops
some work for the worker thread.  Once we take kc->job_lock, we
guarantee that any written memory is visible to the other CPUs.
Signed-off-by: NMikulas Patocka <mpatocka@redhat.com>
Signed-off-by: NAlasdair G Kergon <agk@redhat.com>

There's a possible theoretical deadlock in dm-kcopyd because multiple
allocations from the same mempool are required to finish a request.
Avoid this by preallocating sub jobs.

There is a mempool of 512 entries. Each request requires up to 9
entries from the mempool. If we have at least 57 concurrent requests
running, the mempool may overflow and mempool allocations may start
blocking until another entry is freed to the mempool. Because the same
thread is used to free entries to the mempool and allocate entries from
the mempool, this may result in a deadlock.

This patch changes it so that one mempool entry contains all 9 "struct
kcopyd_job" required to fulfill the whole request. The allocation is
done only once in dm_kcopyd_copy and no further mempool allocations are
done during request processing.

If dm_kcopyd_copy is not run in the completion thread, this
implementation is deadlock-free.

MIN_JOBS needs reducing accordingly and we've chosen to reduce it
further to 8.
Signed-off-by: NMikulas Patocka <mpatocka@redhat.com>
Signed-off-by: NAlasdair G Kergon <agk@redhat.com>

Don't split SUB_JOB_SIZE jobs

If the job size equals SUB_JOB_SIZE, there is no point in splitting it.
Splitting it just unnecessarily wastes time, because the split job size
is SUB_JOB_SIZE too.
Signed-off-by: NMikulas Patocka <mpatocka@redhat.com>
Signed-off-by: NAlasdair G Kergon <agk@redhat.com>

Integrity errors need to be passed to the owner of the integrity
metadata for processing. Consequently EILSEQ should be passed up the
stack.

Cc: stable@kernel.org
Signed-off-by: NMartin K. Petersen <martin.petersen@oracle.com>
Acked-by: NMike Snitzer <snitzer@redhat.com>
Signed-off-by: NAlasdair G Kergon <agk@redhat.com>

This patch adds a check that a block device has a request function
defined before it is used.  Otherwise, misconfiguration can cause an oops.

Because we are allowing devices with zero size e.g. an offline multipath
device as in commit 2cd54d9b
("dm: allow offline devices") there needs to be an additional check
to ensure devices are initialised.  Some block devices, like a loop
device without a backing file, exist but have no request function.

Reproducer is trivial: dm-mirror on unbound loop device
(no backing file on loop devices)

dmsetup create x --table "0 8 mirror core 2 8 sync 2 /dev/loop0 0 /dev/loop1 0"

and mirror resync will immediatelly cause OOps.

BUG: unable to handle kernel NULL pointer dereference at   (null)
 ? generic_make_request+0x2bd/0x590
 ? kmem_cache_alloc+0xad/0x190
 submit_bio+0x53/0xe0
 ? bio_add_page+0x3b/0x50
 dispatch_io+0x1ca/0x210 [dm_mod]
 ? read_callback+0x0/0xd0 [dm_mirror]
 dm_io+0xbb/0x290 [dm_mod]
 do_mirror+0x1e0/0x748 [dm_mirror]
Signed-off-by: NMilan Broz <mbroz@redhat.com>
Reported-by: NZdenek Kabelac <zkabelac@redhat.com>
Acked-by: NMike Snitzer <snitzer@redhat.com>
Cc: stable@kernel.org
Signed-off-by: NAlasdair G Kergon <agk@redhat.com>

Permit a target to support discards regardless of whether or not all its
underlying devices do.
Signed-off-by: NMike Snitzer <snitzer@redhat.com>
Signed-off-by: NAlasdair G Kergon <agk@redhat.com>

Plan to remove floppy_disable_hlt in 2012, an ancient
workaround with comments that it should be removed.

This allows us to remove clutter and a run-time branch
from the idle code.

WARN_ONCE() on invocation until it is removed.

cc: x86@kernel.org
cc: stable@kernel.org # .39.x
Signed-off-by: NLen Brown <len.brown@intel.com>

The workaround for AMD erratum 400 uses the term "c1e" falsely suggesting:
1. Intel C1E is somehow involved
2. All AMD processors with C1E are involved

Use the string "amd_c1e" instead of simply "c1e" to clarify that
this workaround is specific to AMD's version of C1E.
Use the string "e400" to clarify that the workaround is specific
to AMD processors with Erratum 400.

This patch is text-substitution only, with no functional change.

cc: x86@kernel.org
Acked-by: NBorislav Petkov <borislav.petkov@amd.com>
Signed-off-by: NLen Brown <len.brown@intel.com>

ec->handle is set in ec_parse_device(), so don't bother to set it again.
Signed-off-by: NZhang Rui <rui.zhang@intel.com>
Signed-off-by: NLen Brown <len.brown@intel.com>

_SxW returns an Integer containing the lowest D-state supported in state
Sx. If OSPM has not indicated that it supports _PR3, then the value “3”
corresponds to D3.  If it has indicated _PR3 support, the value “3”
represents D3hot and the value “4” represents D3cold.

Linux does set _OSC._PR3, so we should fix it to expect that _SxW can
return 4.
Signed-off-by: NLin Ming <ming.m.lin@intel.com>
Acked-by: NJesse Barnes <jbarnes@virtuousgeek.org>
Signed-off-by: NLen Brown <len.brown@intel.com>

Usually, there are multiple processors defined in ACPI table, for
example

    Scope (_PR)
    {
        Processor (CPU0, 0x00, 0x00000410, 0x06) {}
        Processor (CPU1, 0x01, 0x00000410, 0x06) {}
        Processor (CPU2, 0x02, 0x00000410, 0x06) {}
        Processor (CPU3, 0x03, 0x00000410, 0x06) {}
    }

processor_physically_present(...) will be called to check whether those
processors are physically present.

Currently we have below codes in processor_physically_present,

cpuid = acpi_get_cpuid(...);
if ((cpuid == -1) && (num_possible_cpus() > 1))
        return false;
return true;

In UP kernel, acpi_get_cpuid(...) always return -1 and
num_possible_cpus() always return 1, so
processor_physically_present(...) always returns true for all passed in
processor handles.

This is wrong for UP processor or SMP processor running UP kernel.

This patch removes the !SMP version of acpi_get_cpuid(), so both UP and
SMP kernel use the same acpi_get_cpuid function.

And for UP kernel, only processor 0 is valid.

https://bugzilla.kernel.org/show_bug.cgi?id=16548
https://bugzilla.kernel.org/show_bug.cgi?id=16357Tested-by: NAnton Kochkov <anton.kochkov@gmail.com>
Tested-by: NAmbroz Bizjak <ambrop7@gmail.com>
Signed-off-by: NLin Ming <ming.m.lin@intel.com>
Signed-off-by: NLen Brown <len.brown@intel.com>

Fix kernel-doc warnings in scsi_proc.c:

  Warning(drivers/scsi/scsi_proc.c:390): No description found for parameter 'dev'
  Warning(drivers/scsi/scsi_proc.c:390): No description found for parameter 'data'
  Warning(drivers/scsi/scsi_proc.c:390): Excess function parameter 's' description in 'always_match'
  Warning(drivers/scsi/scsi_proc.c:390): Excess function parameter 'p' description in 'always_match'
Signed-off-by: NRandy Dunlap <randy.dunlap@oracle.com>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

With /sys/kernel/debug/acpi/custom_method root can write
to arbitrary memory and increase his priveleges, even if
these are restricted.

-> Make this an own debug .config option and warn about the
security issue in the config description.

-> Still keep acpi/debugfs.c which now only creates an empty
   /sys/kernel/debug/acpi directory. There might be other
   users of it later.
Signed-off-by: NThomas Renninger <trenn@suse.de>
Acked-by: NRafael J. Wysocki <rjw@sisk.pl>
Acked-by: rui.zhang@intel.com
Signed-off-by: NLen Brown <len.brown@intel.com>

- Move param aml_debug_output to other params into sysfs.c
- Split acpi_debugfs_init to prepare custom_method to be
  an own .config option and driver.
Signed-off-by: NThomas Renninger <trenn@suse.de>
Acked-by: NRafael J. Wysocki <rjw@sisk.pl>
Acked-by: rui.zhang@intel.com
Signed-off-by: NLen Brown <len.brown@intel.com>

Enable MSI workaround for Quanta laptops.
https://bugzilla.kernel.org/show_bug.cgi?id=20242Tested-by: NJan-Matthias Braun <jan_braun@gmx.net>
Signed-off-by: NZhang Rui <rui.zhang@intel.com>
Signed-off-by: NLen Brown <len.brown@intel.com>

Cpuidle menu governor is using u32 as a temporary datatype for storing
nanosecond values which wrap around at 4.294 seconds. This causes errors
in predicted sleep times resulting in higher than should be C state
selection and increased power consumption. This also breaks cpuidle
state residency statistics.

cc: stable@kernel.org # .32.x through .39.x
Signed-off-by: NTero Kristo <tero.kristo@nokia.com>
Signed-off-by: NLen Brown <len.brown@intel.com>

Signed-off-by: NLiam Girdwood <lrg@ti.com>
Acked-by: NRandy Dunlap <randy.dunlap@oracle.com>
Signed-off-by: NSamuel Ortiz <sameo@linux.intel.com>

With the addition of a device platform mfd_cell pointer, MFD drivers
can go back to passing platform data back to their sub drivers.
This allows for an mfd_cell->mfd_data removal and thus keep the
sub drivers MFD agnostic. This is mostly needed for non MFD aware
sub drivers.
Signed-off-by: NMattias Wallin <mattias.wallin@stericsson.com>
Signed-off-by: NSamuel Ortiz <sameo@linux.intel.com>