VIA82xx driver
Addded a dxs_support entry for an ASUS mobo.
Signed-off-by: NTakashi Iwai <tiwai@suse.de>

HDA Codec driver
Fixed the confliction of capture controls on ALC880 'test' model.
Signed-off-by: NTakashi Iwai <tiwai@suse.de>

HDA Codec driver
Mark the ALC882 'LFE Playback Switch' as an input, like the other
playback switch settings.
Signed-off-by: NJohn W. Linville <linville@tuxdriver.com>
Signed-off-by: NTakashi Iwai <tiwai@suse.de>

HDA Codec driver
Fix a typo (cut & paste) in the alc880_test_mixer structure.
Signed-off-by: NJohn W. Linville <linville@tuxdriver.com>
Signed-off-by: NTakashi Iwai <tiwai@suse.de>

HDA Codec driver
The ALC260 'Mono Playback Switch' is marked as an output in
patch_realtek.c. It actually does not work unless it is marked as an
input. Go figure... This was tested and confirmed on an HP xw4300.
Signed-off-by: NJohn W. Linville <linville@tuxdriver.com>
Signed-off-by: NTakashi Iwai <tiwai@suse.de>

USB generic driver
Increase the maximum PCM buffer size to 1 MB.  The USB driver doesn't
have any inherent buffer size limit, and big multichannel interfaces
may benefit from this.
Signed-off-by: NClemens Ladisch <clemens@ladisch.de>

USB generic driver
There is another revision of the PHASE26 with a different product ID;
add a quirk entry for that, too.
Signed-off-by: NClemens Ladisch <clemens@ladisch.de>

USB generic driver
Add quirk entries for four unknown Yamaha USB MIDI devices.
Signed-off-by: NClemens Ladisch <clemens@ladisch.de>

PPC PMAC driver
Added the support of iBook 1.33GHz.
Signed-off-by: NTakashi Iwai <tiwai@suse.de>

USB generic driver
Add a quirk entry for the Roland RD-700SX.
This should work for the RD-300SX, too.
Signed-off-by: NClemens Ladisch <clemens@ladisch.de>

VIA82xx driver
Added a dxs whitelist entry for an ECS mobo.
Signed-off-by: NTakashi Iwai <tiwai@suse.de>

AC97 Codec
A single call to the driver suspend/resume method for each device is
enough. The level and SUSPEND_*/RESUME_* arguments are deprecated and
said to be removed eventually anyway (no other subsystem are using them
anymore except platform devices).
Signed-off-by: NNicolas Pitre <nico@cam.org>
Signed-off-by: NTakashi Iwai <tiwai@suse.de>

AC97 Codec
Don't use dev.platform_data to store a reference to the containing
ac97_t structure.  Such assignment is redundent since we can deduce the
ac97_t structure location from the contained device structure.  This
sets platform_data free for other purposes.
Signed-off-by: NNicolas Pitre <nico@cam.org>
Signed-off-by: NTakashi Iwai <tiwai@suse.de>

AC97 Codec
The bus_id is initialized with a generic identifier string which is not
really useful for proper driver matching.  Let the driver decide what it
needs via its probe method instead.
Signed-off-by: NNicolas Pitre <nico@cam.org>
Signed-off-by: NTakashi Iwai <tiwai@suse.de>

USB generic driver
Add a quirk entry for the Hercules DJ Console to ignore timeouts on
some mixer control transfers.
Signed-off-by: NClemens Ladisch <clemens@ladisch.de>

ARM PXA2XX driver
Fix pm_message_t in PXA2XX-AC97 driver.
Signed-off-by: NTakashi Iwai <tiwai@suse.de>

HDA Intel driver
Disable the auto-correction of DMA position temporarily.
It doesn't work as expected yet...
Signed-off-by: NTakashi Iwai <tiwai@suse.de>

HDA generic driver
This creates 'empty' hda generic for unknown MFG-only codecs.
Signed-off-by: NSasha Khapyorsky <sashak@smlink.com>
Signed-off-by: NTakashi Iwai <tiwai@suse.de>

AC97 Codec
No index is templated for si3036 modem controls.
Signed-off-by: NSasha Khapyorsky <sashak@smlink.com>
Signed-off-by: NTakashi Iwai <tiwai@suse.de>

AC97 Codec
No index is templated for mdoem controls.
Signed-off-by: NSasha Khapyorsky <sashak@smlink.com>
Signed-off-by: NTakashi Iwai <tiwai@suse.de>

OPL3SA2 driver
Signed-off-by: NDaniel Ritz <daniel.ritz@gmx.ch>
Signed-off-by: NTakashi Iwai <tiwai@suse.de>

The nameidata "last.name" is always allocated with "__getname()", and
should always be free'd with "__putname()".

Using "putname()" without the underscores will leak memory, because the
allocation will have been hidden from the AUDITSYSCALL code.

Arguably the real bug is that the AUDITSYSCALL code is really broken,
but in the meantime this fixes the problem people see.

Reported by Robert Derr, patch by Rick Lindsley.
Acked-by: NAl Viro <viro@ftp.linux.org.uk>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

I've noticed a kernel hang during a storm of CMC interrupts, which was
tracked down to the continual execution of the interrupt handler.

There's code in the CMC handler that's supposed to disable CMC
interrupts and switch to polling mode when it sees a bunch of CMCs.
Because disabling CMCs across all CPUs isn't safe in interrupt context,
the disable is done with a schedule_work().  But with continual CMC
interrupts, the schedule_work() never gets executed.

The following patch immediately disables CMC interrupts for the current
CPU.  This then allows (at least) one CPU to ignore CMC interrupts,
execute the schedule_work() code, and disable CMC interrupts on the rest
of the CPUs.
Acked-by: NKeith Owens <kaos@sgi.com>
Signed-off-by: NBryan Sutula <Bryan.Sutula@hp.com>
Signed-off-by: NTony Luck <tony.luck@intel.com>

drivers/mfd/ucb1x00-core.c:555: error: static declaration of 'ucb1x00_class' follows non-static declaration
drivers/mfd/ucb1x00.h:109: error: previous declaration of 'ucb1x00_class' was here

Since ucb1x00_class isn't used by anything, remove the extern
declaration and the symbol export.
Signed-off-by: NRussell King <rmk+kernel@arm.linux.org.uk>

By allocating early memory for the firmware page tables, we
can write over the beginning of the initrd image.

So what we do now is:

1) Read in firmware translations table while still on the
   firmware's trap table.
2) Switch to Linux trap table.
3) Init bootmem.
4) Build firmware page tables using __alloc_bootmem().

And this keeps the initrd from being clobbered.
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Patch from Catalin Marinas

There is no reason to not allow these config options. They are useful when
the hardware has problems.
Signed-off-by: NCatalin Marinas <catalin.marinas@arm.com>
Signed-off-by: NRussell King <rmk+kernel@arm.linux.org.uk>

Remove some duplicated items due to the inclusion of the general
drivers/Kconfig file. These are now taken from drivers/char/Kconfig,
and can be turned off there as well (which is desirable sometimes).
Signed-off-by: NMartin Habets <errandir_news@mph.eclipse.co.uk>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Since changeset 98a82feb AX.25 is passing
received IP and ARP packets to the stack through netif_rx() but we don't
set the skb->mac.raw to right value which may result in a crash with
applications that use a packet socket.
Signed-off-by: NRalf Baechle DL5RB <ralf@linux-mips.org>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Here is a patch that adds a helper called xfrm_policy_id2dir to
document the fact that the policy direction can be and is derived
from the index.

This is based on a patch by YOSHIFUJI Hideaki and 210313105@suda.edu.cn.
Signed-off-by: NHerbert Xu <herbert@gondor.apana.org.au>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Timer set up by pneigh_enqueue() ended up calling ndisc_rcv()
via pndisc_redo(), which clears LOCALLY_ENQUEUED flag in
NEIGH_CB(skb) and NS was queued again.
Let's call ndisc_recv_ns() directly to avoid the loop.
Signed-off-by: NYOSHIFUJI Hideaki <yoshfuji@linux-ipv6.org>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Missing parenthesis in causes BIC to be slow in increasing congestion
window.

Spotted by Injong Rhee.
Signed-off-by: NStephen Hemminger <shemminger@osdl.org>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Signed-Off-By: NYan Zheng <yanzheng@21cn.com>
Acked-by: NYOSHIFUJI Hideaki <yoshfuji@linux-ipv6.org>
Acked-by: NDavid L Stevens <dlstevens@us.ibm.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Just enables some extra printk's, but still..  Only the sysadmin should
be able to do that.
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

Older Macs which uses the VIA chip timers to calibrate the timebase used
some code that wouldn't work if HZ wasn't divisible by 100...

This fixes it at least for 250.  Not totally perfect but should be
enough for now (so it at least works with the default value which is now
250).

There is still a potential issue with the core using CLOCK_TICK_RATE to
maintain xtime and CLOCK_TICK_RATE value on ppc32 is pure crap, but that
is a different problem, this patch at least brings us back to our
previous situation.
Signed-off-by: NBenjamin Herrenschmidt <benh@kernel.crashing.org>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

If we switch extern inline to static inline, we'd better switch the
pre-declarations we use to say that these puppies have
__attribute_const__ on them.

Otherwise we get extern declaration followed by static inline one.
Which makes gcc unhappy, and for a good reason...
Signed-off-by: NAl Viro <viro@zeniv.linux.org.uk>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>