Rename sector to cc_sector in dm-crypt's convert_context struct.

This is preparation for a future patch that merges dm_io and
convert_context which both have a "sector" field.
Signed-off-by: NMikulas Patocka <mpatocka@redhat.com>
Signed-off-by: NAlasdair G Kergon <agk@redhat.com>

Store the crypt_config struct pointer directly in struct dm_crypt_io
instead of the dm_target struct pointer.

Target information is never used - only target->private is referenced,
thus we can change it to point directly to struct crypt_config.
Signed-off-by: NMikulas Patocka <mpatocka@redhat.com>
Signed-off-by: NAlasdair G Kergon <agk@redhat.com>

Move static dm-crypt cipher data out of per-cpu structure.

Cipher information is static, so it does not have to be in a per-cpu
structure.
Signed-off-by: NMikulas Patocka <mpatocka@redhat.com>
Signed-off-by: NAlasdair G Kergon <agk@redhat.com>

There are two dm crypt structures that have a field called "pending".

This patch renames them to "cc_pending" and "io_pending" to reduce confusion
and ease searching the code.

Also remove unnecessary initialisation of r in crypt_convert_block().
Signed-off-by: NMikulas Patocka <mpatocka@redhat.com>
Signed-off-by: NAlasdair G Kergon <agk@redhat.com>

In preparation for RAID10 inclusion in dm-raid, we move the sectors_per_dev
calculation later in the device creation process.  This is because we won't
know up-front how many stripes vs how many mirrors there are which will
change the calculation.
Signed-off-by: NJonathan Brassow <jbrassow@redhat.com>
Signed-off-by: NAlasdair G Kergon <agk@redhat.com>

In preparation for RAID10 addition to dm-raid, we change an 'if' conditional
to a 'switch' conditional to make it easier to see what is being checked for
each RAID type.
Signed-off-by: NJonathan Brassow <jbrassow@redhat.com>
Signed-off-by: NAlasdair G Kergon <agk@redhat.com>

A SCSI device handler might get attached to a device during the
initial device scan.  We do not necessarily want to override
this when loading a multipath table, so this patch adds a new
multipath feature argument "retain_attached_hw_handler".

During SCSI device scan all loaded SCSI device handlers will be
consulted for a match (via scsi_dh's provided .match).  If a match is
found that device handler will be attached.  We need a way to have
userspace multipathd's provided 'hw_handler' not override the already
attached hardware handler.

When specifying the new feature 'retain_attached_hw_handler' multipath
will use the currently attached hardware handler instead of trying to
attach the one specified during table load.  If no hardware handler is
attached the specified hardware handler will still be used.

Leverages scsi_dh_attach's ability to increment the scsi_dh's reference
count if the same scsi_dh name is provided when attaching - currently
attached scsi_dh name is determined with scsi_dh_attached_handler_name.

Depends upon commit 7e8a74b1
("[SCSI] scsi_dh: add scsi_dh_attached_handler_name").
Signed-off-by: NMike Snitzer <snitzer@redhat.com>
Tested-by: NBabu Moger <babu.moger@netapp.com>
Reviewed-by: NChandra Seetharaman <sekharan@us.ibm.com>
Acked-by: NHannes Reinecke <hare@suse.de>
Signed-off-by: NAlasdair G Kergon <agk@redhat.com>

dm-thin will be most likely used with a block size that is a power of
two. So it should be optimized for this case.

This patch changes division and modulo operations to shifts and bit
masks if block size is a power of two.

A test that bi_sector is divisible by a block size is removed from
io_overlaps_block. Device mapper never sends bios that span a block
boundary. Consequently, if we tested that bi_size is equivalent to block
size, bi_sector must already be on a block boundary.
Signed-off-by: NMikulas Patocka <mpatocka@redhat.com>
Signed-off-by: NAlasdair G Kergon <agk@redhat.com>

This patch sets the variable "ti->split_discard_requests" for the dm thin
target so that device mapper core splits discard requests on a block
boundary.

Consequently, a discard request that spans multiple blocks is never sent
to dm-thin. The patch also removes some code in process_discard that
deals with discards that span multiple blocks.
Signed-off-by: NMikulas Patocka <mpatocka@redhat.com>
Signed-off-by: NMike Snitzer <snitzer@redhat.com>
Signed-off-by: NAlasdair G Kergon <agk@redhat.com>

This patch introduces a new variable split_discard_requests. It can be
set by targets so that discard requests are split on max_io_len
boundaries.

When split_discard_requests is not set, discard requests are only split on
boundaries between targets, as was the case before this patch.
Signed-off-by: NMikulas Patocka <mpatocka@redhat.com>
Signed-off-by: NAlasdair G Kergon <agk@redhat.com>

Non power of 2 blocksize support is needed to properly align thinp IO
on storage that has non power of 2 optimal IO sizes (e.g. RAID6 10+2).

Use sector_div to support non power of 2 blocksize for the pool's
data device.  This provides comparable performance to the power of 2
math that was performed until now (as tested on modern x86_64 hardware).

The kernel currently assumes that limits->discard_granularity is a power
of two so the thin target only enables discard support if the block
size is a power of two.

Eliminate pool structure's 'block_shift', 'offset_mask' and
remaining 4 byte holes.
Signed-off-by: NMike Snitzer <snitzer@redhat.com>
Signed-off-by: NMikulas Patocka <mpatocka@redhat.com>
Signed-off-by: NAlasdair G Kergon <agk@redhat.com>

dm-stripe is usually used with a chunk size that is a power of two.
Use faster shifts and bit masks in such cases.

stripe_width is already optimized in a similar way.
Signed-off-by: NMikulas Patocka <mpatocka@redhat.com>
Signed-off-by: NAlasdair G Kergon <agk@redhat.com>

There is no technical limitation in device mapper that would prevent the
dm-stripe target from using a stripe size smaller than page size.

This patch removes the limit and makes stripe volumes portable across
architectures with different page size.
Signed-off-by: NMikulas Patocka <mpatocka@redhat.com>
Signed-off-by: NAlasdair G Kergon <agk@redhat.com>

Support non-power-of-2 chunk sizes with dm striping for proper alignment
of stripe IO on storage that has non-power-of-2 optimal IO sizes (e.g.
RAID6 10+2).
Signed-off-by: NMike Snitzer <snitzer@redhat.com>
Signed-off-by: NMikulas Patocka <mpatocka@redhat.com>
Signed-off-by: NAlasdair G Kergon <agk@redhat.com>

Remove the restriction that limits a target's specified maximum incoming
I/O size to be a power of 2.

Rename this setting from 'split_io' to the less-ambiguous 'max_io_len'.
Change it from sector_t to uint32_t, which is plenty big enough, and
introduce a wrapper function dm_set_target_max_io_len() to set it.
Use sector_div() to process it now that it is not necessarily a power of 2.
Signed-off-by: NMike Snitzer <snitzer@redhat.com>
Signed-off-by: NAlasdair G Kergon <agk@redhat.com>

The structure stripe_c contains a stripes_mask field. This field is
useless because it can be trivially calculated by subtracting one from
stripes. It is used only at one place. This patch removes it.

The patch also changes ffs(stripes) - 1 to __ffs(stripes).
Signed-off-by: NMikulas Patocka <mpatocka@redhat.com>
Signed-off-by: NAlasdair G Kergon <agk@redhat.com>

dm-stripe is supposed to ensure that all the space allocated to the
stripes is fully used and that all stripes are the same size.  This
patch fixes the test.  It checks that device length is divisible by the
chunk size and checks that the resulting quotient is divisible by the
number of stripes (which is equivalent to testing if device length is
divisible by chunk_size * stripes).

Previously, the code only tested that the number of sectors in the target
was divisible by each of the chunk size and the number of stripes
separately, which could leave entire stripes unused.

(A setup that genuinely needs some stripes to be shorter than others
can be created by concatenating striped targets.)
Signed-off-by: NMikulas Patocka <mpatocka@redhat.com>
Signed-off-by: NAlasdair G Kergon <agk@redhat.com>

Provide specific error message strings for two pool_ctr() failure cases
that currently give just "Unknown error".

Reference: test_two_pools_pointing_to_the_same_metadata_fails and
test_different_pool_cant_replace_pool in thinp-test-suite.
Signed-off-by: NMike Snitzer <snitzer@redhat.com>
Signed-off-by: NAlasdair G Kergon <agk@redhat.com>

Replace obsolete simple_strtoul() with kstrtou8/kstrtouint.
Signed-off-by: Nmajianpeng <majianpeng@gmail.com>
Signed-off-by: NMikulas Patocka <mpatocka@redhat.com>
Signed-off-by: NAlasdair G Kergon <agk@redhat.com>

Remove redundant bvm->bi_sector self-assignment in dm snapshot's
origin_merge().
Signed-off-by: NAlasdair G Kergon <agk@redhat.com>

Introduce THIN_MAX_CONCURRENT_LOCKS into dm-thin-metadata to
give a name to an otherwise "magic" number.
Signed-off-by: NJoe Thornber <ejt@redhat.com>
Signed-off-by: NMike Snitzer <snitzer@redhat.com>
Signed-off-by: NAlasdair G Kergon <agk@redhat.com>

Remove the pointless label 'out' from __commit_transaction in
dm-thin-metadata.c
Signed-off-by: NJoe Thornber <ejt@redhat.com>
Signed-off-by: NMike Snitzer <snitzer@redhat.com>
Signed-off-by: NAlasdair G Kergon <agk@redhat.com>

Remove debug space map checker from dm persistent data.

The space map checker is a wrapper for other space maps that double
checks the reference counts are correct.  It holds all these reference
counts in memory rather than on disk, so uses a lot of memory and is
thus restricted to small pools.

As yet, this checker hasn't found any issues, but has caused a few of
its own due to people turning it on by default with larger pools.

Removing.
Signed-off-by: NJoe Thornber <ejt@redhat.com>
Signed-off-by: NMike Snitzer <snitzer@redhat.com>
Signed-off-by: NAlasdair G Kergon <agk@redhat.com>

Remove unused dm_flush_fn .flush target method from header.

This was left-over from the FLUSH/FUA conversion and is no longer used.
Signed-off-by: NJoe Thornber <ejt@redhat.com>
Signed-off-by: NMike Snitzer <snitzer@redhat.com>
Signed-off-by: NAlasdair G Kergon <agk@redhat.com>

Clean up "warning: dubious: !x & y".  Also make it clear that
__snapshotted_since() returns a bool and that dm_thin_lookup_result's
'shared' member is a flag.
Signed-off-by: NMike Snitzer <snitzer@redhat.com>
Signed-off-by: NAlasdair G Kergon <agk@redhat.com>

Reduce the slab size used for the dm_thin_endio_hook mempool.

Allocation has been seen to fail on machines with smaller amounts
of memory due to fragmentation.

  lvm: page allocation failure. order:5, mode:0xd0
  device-mapper: table: 253:38: thin-pool: Error creating pool's endio_hook mempool

Cc: stable@vger.kernel.org
Signed-off-by: NAlasdair G Kergon <agk@redhat.com>

Pull first round of SCSI updates from James Bottomley:
 "The most important feature of this patch set is the new async
  infrastructure that makes sure async_synchronize_full() synchronizes
  all domains and allows us to remove all the hacks (like having
  scsi_complete_async_scans() in the device base code) and means that
  the async infrastructure will "just work" in future.

  The rest is assorted driver updates (aacraid, bnx2fc, virto-scsi,
  megaraid, bfa, lpfc, qla2xxx, qla4xxx) plus a lot of infrastructure
  work in sas and FC.

  Signed-off-by: James Bottomley <JBottomley@Parallels.com>"

* tag 'scsi-misc' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi: (97 commits)
  [SCSI] Revert "[SCSI] fix async probe regression"
  [SCSI] cleanup usages of scsi_complete_async_scans
  [SCSI] queue async scan work to an async_schedule domain
  [SCSI] async: make async_synchronize_full() flush all work regardless of domain
  [SCSI] async: introduce 'async_domain' type
  [SCSI] bfa: Fix to set correct return error codes and misc cleanup.
  [SCSI] aacraid: Series 7 Async. (performance) mode support
  [SCSI] aha152x: Allow use on 64bit systems
  [SCSI] virtio-scsi: Add vdrv->scan for post VIRTIO_CONFIG_S_DRIVER_OK LUN scanning
  [SCSI] bfa: squelch lockdep complaint with a spin_lock_init
  [SCSI] qla2xxx: remove unnecessary reads of PCI_CAP_ID_EXP
  [SCSI] qla4xxx: remove unnecessary read of PCI_CAP_ID_EXP
  [SCSI] ufs: fix incorrect return value about SUCCESS and FAILED
  [SCSI] ufs: reverse the ufshcd_is_device_present logic
  [SCSI] ufs: use module_pci_driver
  [SCSI] usb-storage: update usb devices for write cache quirk in quirk list.
  [SCSI] usb-storage: add support for write cache quirk
  [SCSI] set to WCE if usb cache quirk is present.
  [SCSI] virtio-scsi: hotplug support for virtio-scsi
  [SCSI] virtio-scsi: split scatterlist per target
  ...

Pull GFS2 updates from Steven Whitehouse.

* git://git.kernel.org/pub/scm/linux/kernel/git/steve/gfs2-3.0-nmw:
  GFS2: Eliminate 64-bit divides
  GFS2: Reduce file fragmentation
  GFS2: kernel panic with small gfs2 filesystems - 1 RG
  GFS2: Fixing double brelse'ing bh allocated in gfs2_meta_read when EIO occurs
  GFS2: Combine functions get_local_rgrp and gfs2_inplace_reserve
  GFS2: Add kobject release method
  GFS2: Size seq_file buffer more carefully
  GFS2: Use seq_vprintf for glocks debugfs file
  seq_file: Add seq_vprintf function and export it
  GFS2: Use lvbs for storing rgrp information with mount option
  GFS2: Cache last hash bucket for glock seq_files
  GFS2: Increase buffer size for glocks and glstats debugfs files
  GFS2: Fix error handling when reading an invalid block from the journal
  GFS2: Add "top dir" flag support
  GFS2: Fold quota data into the reservations struct
  GFS2: Extend the life of the reservations

Pull cgroup changes from Tejun Heo:
 "Nothing too interesting.  A minor bug fix and some cleanups."

* 'for-3.6' of git://git.kernel.org/pub/scm/linux/kernel/git/tj/cgroup:
  cgroup: Update remount documentation
  cgroup: cgroup_rm_files() was calling simple_unlink() with the wrong inode
  cgroup: Remove populate() documentation
  cgroup: remove hierarchy_mutex

Pull workqueue changes from Tejun Heo:
 "There are three major changes.

   - WQ_HIGHPRI has been reimplemented so that high priority work items
     are served by worker threads with -20 nice value from dedicated
     highpri worker pools.

   - CPU hotplug support has been reimplemented such that idle workers
     are kept across CPU hotplug events.  This makes CPU hotplug cheaper
     (for PM) and makes the code simpler.

   - flush_kthread_work() has been reimplemented so that a work item can
     be freed while executing.  This removes an annoying behavior
     difference between kthread_worker and workqueue."

* 'for-3.6' of git://git.kernel.org/pub/scm/linux/kernel/git/tj/wq:
  workqueue: fix spurious CPU locality WARN from process_one_work()
  kthread_worker: reimplement flush_kthread_work() to allow freeing the work item being executed
  kthread_worker: reorganize to prepare for flush_kthread_work() reimplementation
  workqueue: simplify CPU hotplug code
  workqueue: remove CPU offline trustee
  workqueue: don't butcher idle workers on an offline CPU
  workqueue: reimplement CPU online rebinding to handle idle workers
  workqueue: drop @bind from create_worker()
  workqueue: use mutex for global_cwq manager exclusion
  workqueue: ROGUE workers are UNBOUND workers
  workqueue: drop CPU_DYING notifier operation
  workqueue: perform cpu down operations from low priority cpu_notifier()
  workqueue: reimplement WQ_HIGHPRI using a separate worker_pool
  workqueue: introduce NR_WORKER_POOLS and for_each_worker_pool()
  workqueue: separate out worker_pool flags
  workqueue: use @pool instead of @gcwq or @cpu where applicable
  workqueue: factor out worker_pool from global_cwq
  workqueue: don't use WQ_HIGHPRI for unbound workqueues

Pull misc udf, ext2, ext3, and isofs fixes from Jan Kara:
 "Assorted, mostly trivial, fixes for udf, ext2, ext3, and isofs.  I'm
  on vacation and scarcely checking email since we are expecting baby
  any day now but these fixes should be safe to go in and I don't want
  to delay them unnecessarily."

* 'for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jack/linux-fs:
  udf: avoid info leak on export
  isofs: avoid info leak on export
  udf: Improve table length check to avoid possible overflow
  ext3: Check return value of blkdev_issue_flush()
  jbd: Check return value of blkdev_issue_flush()
  udf: Do not decrement i_blocks when freeing indirect extent block
  udf: Fix memory leak when mounting
  ext2: cleanup the confused goto label
  UDF: Remove unnecessary variable "offset" from udf_fill_inode
  udf: stop using s_dirt
  ext3: force ro mount if ext3_setup_super() fails
  quota: fix checkpatch.pl warning by replacing <asm/uaccess.h> with <linux/uaccess.h>

Pull m68knommu arch update from Greg Ungerer:
 "Quite a varied set of changes this time.
   - A little more merge cleanup, this time the assembler entry code.
   - New sub-architecture support for the ColdFire 5251/5253 and 5441x
     CPU families.
   - Specific clk support code for the ColdFire 520x and 532x CPU
     familes.
   - Refactoring of the ColdFire GPIO support.
   - PCI bus support for some ColdFire CPUS that have PCI hardware (54xx
     family).  This showed up a few problems with ColdFire cache,
     allocating coherent memory and bi-directional DMA support.  Fixes
     for those too."

* 'for-next' of git://git.kernel.org/pub/scm/linux/kernel/git/gerg/m68knommu: (21 commits)
  m68k: allow PCI bus to be enabled for ColdFire m54xx CPUs
  m68k: add PCI bus code support for the ColdFire M54xx SoC family
  m68k: add IO access definitions to support PCI on ColdFire platforms
  m68k: add PCI bus support definitions for the ColdFire M54xx SoC family
  m68k: common PCI support definitions and code
  m68k: add support for DMA_BIDIRECTIONAL in dma support functions
  m68k: fix ColdFire clear cache operation
  m68k: use simpler dma_alloc_coherent() for ColdFire CPUs
  m68knommu: platform support for 8390 based ethernet used on some boards
  m68knommu: Add clk definitions for m532x.
  m68knommu: Add clk definitions for m520x.
  m68knommu: Add rtc device for m5441x.
  m68knommu: add definitions for the third interrupt controller on devices that don't have a third interrupt controller.
  m68knommu: Add support for the Coldfire m5441x.
  m68knommu: use MCF_IRQ_PIT1 instead of MCFINT_VECBASE + MCFINT_PIT1
  coldfire-qspi: Add support for the Coldfire 5251/5253.
  m68knommu: Add support for the Coldfire 5251/5253
  m68knommu: refactor Coldfire GPIO not to require GPIOLIB, eliminate mcf_gpio_chips.
  m68k: merge the MMU and non-MMU versions of the entry.S code
  m68k: use jbsr to call functions instead of bsrl
  ...

Pull slave-dmaengine update from Vinod Koul:
 "This time we have a new dmaengine driver from the tegra folks.  Also
  we have Guennadi's cleanup of sh drivers which incudes a library for
  sh drivers.  And the usual odd fixes in bunch of drivers and some nice
  cleanup of dw_dmac from Andy."

Fix up conflicts in drivers/mmc/host/sh_mmcif.c

* 'next' of git://git.infradead.org/users/vkoul/slave-dma: (46 commits)
  dmaengine: Cleanup logging messages
  mmc: sh_mmcif: switch to the new DMA channel allocation and configuration
  dma: sh: provide a migration path for slave drivers to stop using .private
  dma: sh: use an integer slave ID to improve API compatibility
  dmaengine: shdma: prepare to stop using struct dma_chan::private
  sh: remove unused DMA device pointer from SIU platform data
  ASoC: siu: don't use DMA device for channel filtering
  dmaengine: shdma: (cosmetic) simplify a static function
  dmaengine: at_hdmac: add a few const qualifiers
  dw_dmac: use 'u32' for LLI structure members, not dma_addr_t
  dw_dmac: mark dwc_dump_lli inline
  dma: mxs-dma: Export missing symbols from mxs-dma.c
  dma: shdma: convert to the shdma base library
  ASoC: fsi: prepare for conversion to the shdma base library
  usb: renesas_usbhs: prepare for conversion to the shdma base library
  ASoC: siu: prepare for conversion to the shdma base library
  serial: sh-sci: prepare for conversion to the shdma base library
  mmc: sh_mobile_sdhi: prepare for conversion to the shdma base library
  mmc: sh_mmcif: remove unneeded struct sh_mmcif_dma, prepare to shdma conversion
  dma: shdma: prepare for conversion to the shdma base library
  ...

Pull common clk framework changes from Michael Turquette:
 "This includes a small number of core framework improvments, platform
  ports and new DT bindings."

Fix up trivial conflicts in drivers/clk/Makefile

* tag 'clk-for-linus' of git://git.linaro.org/people/mturquette/linux: (21 commits)
  clk: fix compile for OF && !COMMON_CLK
  clk: fix clk_get on of_clk_get_by_name return check
  clk: mxs: clk_register_clkdev mx28 usb clocks
  clk: add highbank clock support
  dt: add clock binding doc to primecell bindings
  clk: add DT fixed-clock binding support
  clk: add DT clock binding support
  ARM: integrator: convert to common clock
  clk: add versatile ICST307 driver
  ARM: integrator: put symbolic bus names on devices
  ARM: u300: convert to common clock
  clk: cache parent clocks only for muxes
  clk: wm831x: Add initial WM831x clock driver
  clk: Constify struct clk_init_data
  clk: Add CLK_IS_BASIC flag to identify basic clocks
  clk: Add support for rate table based dividers
  clk: Add support for power of two type dividers
  clk: mxs: imx28: decrease the frequency of ref_io1 for SSP2 and SSP3
  clk: mxs: add clkdev lookup for pwm
  clk: mxs: Fix the GPMI clock name
  ...

Pull IOMMU updates from Joerg Roedel:
 "The most important part of these updates is the IOMMU groups code
  enhancement written by Alex Williamson.  It abstracts the problem that
  a given hardware IOMMU can't isolate any given device from any other
  device (e.g.  32 bit PCI devices can't usually be isolated).  Devices
  that can't be isolated are grouped together.  This code is required
  for the upcoming VFIO framework.

  Another IOMMU-API change written by me is the introduction of domain
  attributes.  This makes it easier to handle GART-like IOMMUs with the
  IOMMU-API because now the start-address and the size of the domain
  address space can be queried.

  Besides that there are a few cleanups and fixes for the NVidia Tegra
  IOMMU drivers and the reworked init-code for the AMD IOMMU.  The
  latter is from my patch-set to support interrupt remapping.  The rest
  of this patch-set requires x86 changes which are not mergabe yet.  So
  full support for interrupt remapping with AMD IOMMUs will come in a
  future merge window."

* tag 'iommu-updates-v3.6-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/joro/iommu: (33 commits)
  iommu/amd: Fix hotplug with iommu=pt
  iommu/amd: Add missing spin_lock initialization
  iommu/amd: Convert iommu initialization to state machine
  iommu/amd: Introduce amd_iommu_init_dma routine
  iommu/amd: Move unmap_flush message to amd_iommu_init_dma_ops()
  iommu/amd: Split enable_iommus() routine
  iommu/amd: Introduce early_amd_iommu_init routine
  iommu/amd: Move informational prinks out of iommu_enable
  iommu/amd: Split out PCI related parts of IOMMU initialization
  iommu/amd: Use acpi_get_table instead of acpi_table_parse
  iommu/amd: Fix sparse warnings
  iommu/tegra: Don't call alloc_pdir with as->lock
  iommu/tegra: smmu: Fix unsleepable memory allocation at alloc_pdir()
  iommu/tegra: smmu: Remove unnecessary sanity check at alloc_pdir()
  iommu/exynos: Implement DOMAIN_ATTR_GEOMETRY attribute
  iommu/tegra: Implement DOMAIN_ATTR_GEOMETRY attribute
  iommu/msm: Implement DOMAIN_ATTR_GEOMETRY attribute
  iommu/omap: Implement DOMAIN_ATTR_GEOMETRY attribute
  iommu/vt-d: Implement DOMAIN_ATTR_GEOMETRY attribute
  iommu/amd: Implement DOMAIN_ATTR_GEOMETRY attribute
  ...

Pull PCI changes from Bjorn Helgaas:
 "Host bridge hotplug:
    - Add MMCONFIG support for hot-added host bridges (Jiang Liu)
  Device hotplug:
    - Move fixups from __init to __devinit (Sebastian Andrzej Siewior)
    - Call FINAL fixups for hot-added devices, too (Myron Stowe)
    - Factor out generic code for P2P bridge hot-add (Yinghai Lu)
    - Remove all functions in a slot, not just those with _EJx (Amos
      Kong)
  Dynamic resource management:
    - Track bus number allocation (struct resource tree per domain)
      (Yinghai Lu)
    - Make P2P bridge 1K I/O windows work with resource reassignment
      (Bjorn Helgaas, Yinghai Lu)
    - Disable decoding while updating 64-bit BARs (Bjorn Helgaas)
  Power management:
    - Add PCIe runtime D3cold support (Huang Ying)
  Virtualization:
    - Add VFIO infrastructure (ACS, DMA source ID quirks) (Alex
      Williamson)
    - Add quirks for devices with broken INTx masking (Jan Kiszka)
  Miscellaneous:
    - Fix some PCI Express capability version issues (Myron Stowe)
    - Factor out some arch code with a weak, generic, pcibios_setup()
      (Myron Stowe)"

* tag 'for-3.6' of git://git.kernel.org/pub/scm/linux/kernel/git/helgaas/pci: (122 commits)
  PCI: hotplug: ensure a consistent return value in error case
  PCI: fix undefined reference to 'pci_fixup_final_inited'
  PCI: build resource code for M68K architecture
  PCI: pciehp: remove unused pciehp_get_max_lnk_width(), pciehp_get_cur_lnk_width()
  PCI: reorder __pci_assign_resource() (no change)
  PCI: fix truncation of resource size to 32 bits
  PCI: acpiphp: merge acpiphp_debug and debug
  PCI: acpiphp: remove unused res_lock
  sparc/PCI: replace pci_cfg_fake_ranges() with pci_read_bridge_bases()
  PCI: call final fixups hot-added devices
  PCI: move final fixups from __init to __devinit
  x86/PCI: move final fixups from __init to __devinit
  MIPS/PCI: move final fixups from __init to __devinit
  PCI: support sizing P2P bridge I/O windows with 1K granularity
  PCI: reimplement P2P bridge 1K I/O windows (Intel P64H2)
  PCI: disable MEM decoding while updating 64-bit MEM BARs
  PCI: leave MEM and IO decoding disabled during 64-bit BAR sizing, too
  PCI: never discard enable/suspend/resume_early/resume fixups
  PCI: release temporary reference in __nv_msi_ht_cap_quirk()
  PCI: restructure 'pci_do_fixups()'
  ...

Pull devicetree updates from Rob Herring:
 "A small set of changes for devicetree:
   - Couple of Documentation fixes
   - Addition of new helper function of_node_full_name
   - Improve of_parse_phandle_with_args return values
   - Some NULL related sparse fixes"

Grant's busy packing.

* tag 'dt-for-3.6' of git://sources.calxeda.com/kernel/linux:
  of: mtd: nuke useless const qualifier
  devicetree: add helper inline for retrieving a node's full name
  of: return -ENOENT when no property
  usage-model.txt: fix typo machine_init->init_machine
  of: Fix null pointer related warnings in base.c file
  LED: Fix missing semicolon in OF documentation
  of: fix a few typos in the binding documentation

Pull pin control changes from Linus Walleij:
 "These are the accumulated pin control patches for v3.6:
   - Various cleanups to the U300 driver
   - Refactor the pin control core to automatically remove any GPIO
     ranges when the drivers are removed, instead of having the drivers
     do this explicitly.
   - Add a function for registering a batch of GPIO ranges.
   - Fix a number of incorrect but non-regressive error checks.
   - Incremental improvements to the COH901, i.MX and Nomadik drivers
   - Add a one-register-per-pin entirely Device Tree-based pin control
     driver from Tony Lindgren."

* tag 'pinctrl-for-v3.6' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-pinctrl:
  pinctrl: Add one-register-per-pin type device tree based pinctrl driver
  pinctrl/nomadik: add spi2_oc1_2 pin group
  pinctrl/nomadik: kerneldoc fix
  pinctrl/nomadik: use devm_* allocators for gpio probe
  pinctrl/nomadik: add pin group to mco function
  pinctrl/nomadik: add hsit_a_2 pin group
  pinctrl/nomadik: add pin group smcs1 and smps0
  pinctrl/nomadik: fix hsir_a_1_pins pin list
  pinctrl: pinctrl-imx: fix map setting problem if NO_PAD_CTL is set
  pinctrl/coh901: use clk_prepare_[en|dis]able()
  pinctrl/pinctrl-tegra: remove IS_ERR checking of pmx->pctl
  pinctrl/pinctrl-spear: remove IS_ERR checking of pmx->pctl
  pinctrl/u300: drop unused variable
  pinctrl: select the proper symbol
  pinctrl: add pinctrl_add_gpio_ranges function
  pinctrl: remove pinctrl_remove_gpio_range
  pinctrl/pinctrl-core: cleanup pinctrl_register
  pinctrl/u300: delete pointless debug print
  pinctrl/pinctrl-u300: remove devm_kfree at driver unload

Pull InfiniBand/RDMA changes from Roland Dreier:
 - Updates to the qib low-level driver
 - First chunk of changes for SR-IOV support for mlx4 IB
 - RDMA CM support for IPv6-only binding
 - Other misc cleanups and fixes

Fix up some add-add conflicts in include/linux/mlx4/device.h and
drivers/net/ethernet/mellanox/mlx4/main.c

* tag 'rdma-for-3.6' of git://git.kernel.org/pub/scm/linux/kernel/git/roland/infiniband: (30 commits)
  IB/qib: checkpatch fixes
  IB/qib: Add congestion control agent implementation
  IB/qib: Reduce sdma_lock contention
  IB/qib: Fix an incorrect log message
  IB/qib: Fix QP RCU sparse warnings
  mlx4: Put physical GID and P_Key table sizes in mlx4_phys_caps struct and paravirtualize them
  mlx4_core: Allow guests to have IB ports
  mlx4_core: Implement mechanism for reserved Q_Keys
  net/mlx4_core: Free ICM table in case of error
  IB/cm: Destroy idr as part of the module init error flow
  mlx4_core: Remove double function declarations
  IB/mlx4: Fill the masked_atomic_cap attribute in query device
  IB/mthca: Fill in sq_sig_type in query QP
  IB/mthca: Warning about event for non-existent QPs should show event type
  IB/qib: Fix sparse RCU warnings in qib_keys.c
  net/mlx4_core: Initialize IB port capabilities for all slaves
  mlx4: Use port management change event instead of smp_snoop
  IB/qib: RCU locking for MR validation
  IB/qib: Avoid returning EBUSY from MR deregister
  IB/qib: Fix UC MR refs for immediate operations
  ...

Pull i2c updates from Jean Delvare:
 "The most important changes here are a big cleanup of the i2c-piix4
  driver, cleanups and interrupt support to the i2c-i801 driver, and
  support for the SCCB protocol."

* 'i2c-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jdelvare/staging:
  i2c-omap: Add support for I2C_M_STOP message flag
  i2c: Fall back to emulated SMBus if the operation isn't supported natively
  i2c: Add SCCB support
  i2c-tiny-usb: Add support for the Robofuzz OSIF USB/I2C converter
  i2c-i801: Enable IRQ for byte_by_byte transactions
  i2c-i801: Enable interrupts on ICH5/7/8/9/10
  i2c-i801: Enable IRQ for SMBus transactions
  i2c-i801: Consolidate polling
  i2c-i801: Drop ENABLE_INT9
  i2c-i801: Rename some SMBHSTCNT bit constants
  i2c-i801: Check and return errors during byte-by-byte transfers
  i2c-i801: Clear only status bits in HST_STS
  i2c-i801: Refactor use of LAST_BYTE in i801_block_transaction_byte_by_byte
  i2c-smbus: Use module_i2c_driver()
  i2c/writing-clients: Mention module_i2c_driver()
  i2c-piix4: Support AMD auxiliary SMBus controller
  i2c-piix4: Separate registration and probing code
  i2c-piix4: Eliminate piix4_smba global variable
  i2c/busses: Use module_pci_driver
  i2c: Update Guenter Roeck's e-mail address