- 28 4月, 2014 5 次提交
-
-
由 Sucheta Chakraborty 提交于
Signed-off-by: NSucheta Chakraborty <sucheta.chakraborty@qlogic.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Sucheta Chakraborty 提交于
o Tx interrupt coalescing parameters can now be set from VF. o Added validation code in PF to validate the parameters. Signed-off-by: NSucheta Chakraborty <sucheta.chakraborty@qlogic.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Harish Patil 提交于
Signed-off-by: NHarish Patil <harish.patil@qlogic.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Shahed Shaikh 提交于
* Use rx_mac_learn instead of mac_learn and eSwitch flag check in Rx path of 82xx adapter. * Check for MAC filter overrun only after driver scans through cached MAC address list. This will help to update the time stamp of cached MAC addresses even if adapter runs out of MAC address filter limit. * Remove expensive log thrown by driver when MAC address filters are exhausted Signed-off-by: NShahed Shaikh <shahed.shaikh@qlogic.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Alexander Gordeev 提交于
As result of deprecation of MSI-X/MSI enablement functions pci_enable_msix() and pci_enable_msi_block() all drivers using these two interfaces need to be updated to use the new pci_enable_msi_range() or pci_enable_msi_exact() and pci_enable_msix_range() or pci_enable_msix_exact() interfaces. Cc: Shahed Shaikh <shahed.shaikh@qlogic.com> Cc: Dept-HSGLinuxNICDev@qlogic.com Cc: netdev@vger.kernel.org Cc: linux-pci@vger.kernel.org Signed-off-by: NAlexander Gordeev <agordeev@redhat.com> Acked-by: NShahed Shaikh <shahed.shaikh@qlogic.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
- 16 4月, 2014 1 次提交
-
-
由 Alexander Gordeev 提交于
Function qlcnic_setup_tss_rss_intr() might enter endless loop in case pci_enable_msix() contiguously returns a positive number of MSI-Xs that could have been allocated. Besides, the function contains 'err = -EIO;' assignment that never could be reached. This update fixes the aforementioned issues. Cc: Shahed Shaikh <shahed.shaikh@qlogic.com> Cc: Dept-HSGLinuxNICDev@qlogic.com Cc: netdev@vger.kernel.org Cc: linux-pci@vger.kernel.org Signed-off-by: NAlexander Gordeev <agordeev@redhat.com> Acked-by: NShahed Shaikh <shahed.shaikh@qlogic.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
- 15 4月, 2014 6 次提交
-
-
由 Manish Chopra 提交于
o While disabling SR-IOV when VFs are assigned to VMs causes host crash so return -EPERM when user request to disable SR-IOV using pci sysfs in case of VFs are assigned to VMs. Signed-off-by: NManish Chopra <manish.chopra@qlogic.com> Signed-off-by: NShahed Shaikh <shahed.shaikh@qlogic.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Jitendra Kalsaria 提交于
o Application expect vNIC number as the array index but driver interface return configuration in array index form. o Pack the vNIC information array in the buffer such that application can access it using vNIC number as the array index. Signed-off-by: NJitendra Kalsaria <jitendra.kalsaria@qlogic.com> Signed-off-by: NShahed Shaikh <shahed.shaikh@qlogic.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Jitendra Kalsaria 提交于
Clear older PVID before adding a newer PVID to the eSwicth port Signed-off-by: NJitendra Kalsaria <jitendra.kalsaria@qlogic.com> Signed-off-by: NShahed Shaikh <shahed.shaikh@qlogic.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Shahed Shaikh 提交于
Do not read max rings count from qlcnic_get_nic_info(). Use driver defined values for 82xx adapters. In case of 83xx adapters, use minimum of firmware provided and driver defined values. Signed-off-by: NShahed Shaikh <shahed.shaikh@qlogic.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Sucheta Chakraborty 提交于
o INIT_NIC_FUNC should be first mailbox sent. Sending DCB capability and parameter query commands after that command. Signed-off-by: NSucheta Chakraborty <sucheta.chakraborty@qlogic.com> Signed-off-by: NShahed Shaikh <shahed.shaikh@qlogic.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Sucheta Chakraborty 提交于
o AEN event was being received before initializing delayed_work struct and handlers for it. This was resulting in crash. This patch fixes it. Signed-off-by: NSucheta Chakraborty <sucheta.chakraborty@qlogic.com> Signed-off-by: NShahed Shaikh <shahed.shaikh@qlogic.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
- 04 4月, 2014 1 次提交
-
-
由 Josh Boyer 提交于
The qlcnic driver fails to build on ARM with errors like: In file included from drivers/net/ethernet/qlogic/qlcnic/qlcnic.h:36:0, from drivers/net/ethernet/qlogic/qlcnic/qlcnic_hw.c:8: drivers/net/ethernet/qlogic/qlcnic/qlcnic_83xx_hw.h:585:1: error: unknown type name 'irqreturn_t' irqreturn_t qlcnic_83xx_clear_legacy_intr(struct qlcnic_adapter *); ^ Nothing in the driver is explicitly including the irq definitions, so we add an include of linux/irq.h to pick them up. Signed-off-by: NJosh Boyer <jwboyer@fedoraproject.org> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
- 02 4月, 2014 1 次提交
-
-
由 Shahed Shaikh 提交于
Commit 2b3d7b75("qlcnic: Add VXLAN Rx offload support") uses vxlan_get_rx_port() which caused build failure when VXLAN=m. This patch fixes the build failure by adding dependency on VXLAN in Kconfig of qlcnic module and use vxlan_get_rx_port() and support code accordingly. Signed-off-by: NShahed Shaikh <shahed.shaikh@qlogic.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
- 27 3月, 2014 1 次提交
-
-
由 Joe Perches 提交于
Casting a pointer to a pointer of the same type is pointless, so remove these unnecessary casts. Done via coccinelle script: $ cat typecast_2.cocci @@ type T; T *foo; @@ - (T *)foo + foo Signed-off-by: NJoe Perches <joe@perches.com> Acked-by: NShahed Shaikh <shahed.shaikh@qlogic.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
- 24 3月, 2014 3 次提交
-
-
由 Shahed Shaikh 提交于
Signed-off-by: NShahed Shaikh <shahed.shaikh@qlogic.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Shahed Shaikh 提交于
This patch adds Rx checksum offload support for VXLAN. Implements .ndo_{add|del}_vxlan_port netdev ops. Adapter supports only one VXLAN port, so program adapter with very first UDP port which VXLAN driver is listening to. Signed-off-by: NShahed Shaikh <shahed.shaikh@qlogic.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Shahed Shaikh 提交于
This patch adds LSO, LSO6 and Tx checksum offload support for VXLAN encapsulated packets on 83xx/84xx series adapters. Signed-off-by: NShahed Shaikh <shahed.shaikh@qlogic.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
- 04 3月, 2014 1 次提交
-
-
由 Dan Carpenter 提交于
The ->tc_cfg[] array has QLC_DCB_MAX_TC (8) elements so the check is off by one. These functions are always called with valid values though so it doesn't affect how the code works. Signed-off-by: NDan Carpenter <dan.carpenter@oracle.com> Acked-by: NSucheta Chakraborty <sucheta.chakraborty@qlogic.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
- 26 2月, 2014 4 次提交
-
-
由 Rajesh Borundia 提交于
o Driver was not re-setting sds ring count to 1 after failing to allocate msi-x interrupts. Signed-off-by: NRajesh Borundia <rajesh.borundia@qlogic.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Sucheta Chakraborty 提交于
o This patch reverts commit 1414abea (qlcnic: Restrict VF from configuring any VLAN mode.) This will allow same multicast address to be used with any VLAN instead of programming seperate (MAC, VLAN) tuples in adapter. This will help save some multicast filters. Signed-off-by: NSucheta Chakraborty <sucheta.chakraborty@qlogic.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Shahed Shaikh 提交于
Once interrupts are enabled, instead of using module parameters, use flags (QLCNIC_MSI_ENABLED and QLCNIC_MSIX_ENABLED) set by driver to check interrupt mode. Signed-off-by: NShahed Shaikh <shahed.shaikh@qlogic.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Shahed Shaikh 提交于
Driver was treating -ve return value as success in case of qlcnic_enable_msi_legacy() failure Signed-off-by: NShahed Shaikh <shahed.shaikh@qlogic.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
- 25 2月, 2014 6 次提交
-
-
由 Shahed Shaikh 提交于
Signed-off-by: NShahed Shaikh <shahed.shaikh@qlogic.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Harish Patil 提交于
Signed-off-by: NHarish Patil <harish.patil@qlogic.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Rajesh Borundia 提交于
o Adapter allows vlan0 traffic in case of SR-IOV after setting QLC_SRIOV_ALLOW_VLAN0 bit even though we do not add vlan0 filters. Signed-off-by: NRajesh Borundia <rajesh.borundia@qlogic.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Sucheta Chakraborty 提交于
Signed-off-by: NSucheta Chakraborty <sucheta.chakraborty@qlogic.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Jitendra Kalsaria 提交于
Qlogic application interface in the driver which has larger than 8 vNIC configuration support has been updated to handle the following cases: o Only 8 or lower total vNICs were enabled within the vNIC 0-7 range o vNICs were enabled in the vNIC 0-15 range such that enabled vNICs were not contiguous and only 8 or lower number of total VNICs were enabled o Disconnect in the vNIC mapping between application and driver when the enabled VNICs were dis contiguous Signed-off-by: NJitendra Kalsaria <jitendra.kalsaria@qlogic.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Shahed Shaikh 提交于
Treat firmware minidump template headers for 82xx and 83xx/84xx adapters separately, as it may change for 82xx and 83xx/84xx adapter type independently. Signed-off-by: NShahed Shaikh <shahed.shaikh@qlogic.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
- 19 2月, 2014 2 次提交
-
-
由 Alexander Gordeev 提交于
As result of deprecation of MSI-X/MSI enablement functions pci_enable_msix() and pci_enable_msi_block() all drivers using these two interfaces need to be updated to use the new pci_enable_msi_range() and pci_enable_msix_range() interfaces. Signed-off-by: NAlexander Gordeev <agordeev@redhat.com> Cc: Himanshu Madhani <himanshu.madhani@qlogic.com> Cc: Rajesh Borundia <rajesh.borundia@qlogic.com> Cc: Shahed Shaikh <shahed.shaikh@qlogic.com> Cc: linux-driver@qlogic.com Cc: netdev@vger.kernel.org Cc: linux-pci@vger.kernel.org Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Alexander Gordeev 提交于
Signed-off-by: NAlexander Gordeev <agordeev@redhat.com> Cc: Himanshu Madhani <himanshu.madhani@qlogic.com> Cc: Rajesh Borundia <rajesh.borundia@qlogic.com> Cc: Shahed Shaikh <shahed.shaikh@qlogic.com> Cc: linux-driver@qlogic.com Cc: netdev@vger.kernel.org Cc: linux-pci@vger.kernel.org Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
- 29 1月, 2014 4 次提交
-
-
由 Shahed Shaikh 提交于
Driver was returning from link event handler without setting linkup variable Signed-off-by: NShahed Shaikh <shahed.shaikh@qlogic.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Rajesh Borundia 提交于
o __qlcnic_down call's netif_tx_disable which in turn stops all the TX queues, corresponding start queue was missing in __qlcnic_up which was leading to tx timeout. o The commit b84caae4 (qlcnic: Fix usage of netif_tx_{wake, stop} api during link change.) exposed this issue. Signed-off-by: NRajesh Borundia <rajesh.borundia@qlogic.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Rajesh Borundia 提交于
o Do not re-initialize vlan list in case of adapter reset. Signed-off-by: NRajesh Borundia <rajesh.borundia@qlogic.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Manish Chopra 提交于
o Bound checks should be >= instead of > for number of receive descriptors and number of receive rings. Signed-off-by: NManish Chopra <manish.chopra@qlogic.com> Signed-off-by: NJitendra Kalsaria <jitendra.kalsaria@qlogic.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
- 24 1月, 2014 5 次提交
-
-
由 Himanshu Madhani 提交于
Signed-off-by: NHimanshu Madhani <himanshu.madhani@qlogic.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Himanshu Madhani 提交于
o Refactored MSI-x vector calculation for All adapters. Decoupled logic in the code which was using same call to request MSI-x vectors in default driver load, as well as during set_channel() operation for TSS/RSS. This refactoring simplifies code for TSS/RSS code path as well as probe path of the driver load for all adapters. Signed-off-by: NHimanshu Madhani <himanshu.madhani@qlogic.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Himanshu Madhani 提交于
o Refactor configuration of interrupt coalescing parameters for all supported adapters. Signed-off-by: NHimanshu Madhani <himanshu.madhani@qlogic.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Manish chopra 提交于
Add support for MSI/MSI-X mode in poll controller routine. Signed-off-by: NManish Chopra <manish.chopra@qlogic.com> Signed-off-by: NShahed Shaikh <shahed.shaikh@qlogic.com> Signed-off-by: NHimanshu Madhani <himanshu.madhani@qlogic.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Manish chopra 提交于
o Added hardware ops for interrupt enable/disable functions Signed-off-by: NManish Chopra <manish.chopra@qlogic.com> Signed-off-by: NShahed Shaikh <shahed.shaikh@qlogic.com> Signed-off-by: NHimanshu Madhani <himanshu.madhani@qlogic.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-