- 11 9月, 2009 4 次提交
-
-
由 Sebastian Ott 提交于
Don't use kfree directly after device registration started. Signed-off-by: NSebastian Ott <sebott@linux.vnet.ibm.com> Signed-off-by: NMartin Schwidefsky <schwidefsky@de.ibm.com>
-
由 Sebastian Ott 提交于
We used the init_name to set the console subchannels name early at the boot stage. With the patch cio: fix memleak in subchannel validation we moved the name setting to the point where we actually register the console subchannel. At this time we can do dynamic allocations and therefore use dev_set_name. Signed-off-by: NSebastian Ott <sebott@linux.vnet.ibm.com> Signed-off-by: NMartin Schwidefsky <schwidefsky@de.ibm.com>
-
由 Sebastian Ott 提交于
When scanning for new subchannels we have a code path where we allocate memory for a struct subchannel, set the device name (which is dynamically allocated now) and do a check if the underlying device is blacklisted - if so we free the subchannel structure. Since we have not set up refcounting at this stage, the device name's memory is lost. Fix this by moving the dev_set_name after the blacklist test. Note: With this patch the init_name for the console subchannel becomes virtually obsolete. Signed-off-by: NSebastian Ott <sebott@linux.vnet.ibm.com> Signed-off-by: NMartin Schwidefsky <schwidefsky@de.ibm.com>
-
由 Peter Oberparleiter 提交于
Ensure that the hardware interruption parameter for a subchannel is reset when the associated subchannel data structure is freed. Signed-off-by: NPeter Oberparleiter <peter.oberparleiter@de.ibm.com> Signed-off-by: NMartin Schwidefsky <schwidefsky@de.ibm.com>
-
- 16 6月, 2009 1 次提交
-
-
由 Sebastian Ott 提交于
Signed-off-by: NSebastian Ott <sebott@linux.vnet.ibm.com> Signed-off-by: NMartin Schwidefsky <schwidefsky@de.ibm.com>
-
- 26 3月, 2009 4 次提交
-
-
由 Martin Schwidefsky 提交于
Signed-off-by: NMartin Schwidefsky <schwidefsky@de.ibm.com>
-
由 Peter Oberparleiter 提交于
Subchannel reprobing can block the kslowcrw workqueue indefinitely while waiting for device recognition to finish which is also scheduled to run on kslowcrw. Prevent this deadlock by moving the waiting portion of subchannel reprobing to the cio workqueue. Signed-off-by: NPeter Oberparleiter <peter.oberparleiter@de.ibm.com> Signed-off-by: NMartin Schwidefsky <schwidefsky@de.ibm.com>
-
由 Sebastian Ott 提交于
Since some callers rely on for_each_subchannel_staged to not fail, fall back to brute force scanning using get_subchannel_by_schid in case of a oom situation. Signed-off-by: NSebastian Ott <sebott@linux.vnet.ibm.com> Signed-off-by: NMartin Schwidefsky <schwidefsky@de.ibm.com>
-
由 Heiko Carstens 提交于
Split machine check handler code and move it to cio and kernel code where it belongs to. No functional change. Signed-off-by: NHeiko Carstens <heiko.carstens@de.ibm.com> Signed-off-by: NMartin Schwidefsky <schwidefsky@de.ibm.com>
-
- 25 3月, 2009 1 次提交
-
-
由 Ming Lei 提交于
This patch implements uevent suppress in kobject and removes it from struct device, based on the following ideas: 1,Uevent sending should be one attribute of kobject, so suppressing it in kobject layer is more natural than in device layer. By this way, we can do it for other objects embedded with kobject. 2,It may save several bytes for each instance of struct device.(On my omap3(32bit ARM) based box, can save 8bytes per device object) This patch also introduces dev_set|get_uevent_suppress() helpers to set and query uevent_suppress attribute in case to help kobject as private part of struct device in future. [This version is against the latest driver-core patch set of Greg,please ignore the last version.] Signed-off-by: NMing Lei <tom.leiming@gmail.com> Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>
-
- 25 12月, 2008 2 次提交
-
-
由 Michael Ernst 提交于
Signed-off-by: NMichael Ernst <mernst@de.ibm.com> Signed-off-by: NMartin Schwidefsky <schwidefsky@de.ibm.com>
-
由 Sebastian Ott 提交于
To change the configuration of a subchannel we alter the modifiable bits of the subchannel's schib field and issue a modify subchannel. There can be the case that not all changes were applied -or worse- quietly overwritten by the hardware. With the next store subchannel we obtain the current state of the hardware but lose our target configuration. With this patch we introduce a subchannel_config structure which contains the target subchannel configuration. Additionally the msch wrapper cio_modify is replaced with cio_commit_config which copies the desired changes to a temporary schib. msch is then called with the temporary schib. This schib is only written back to the subchannel if all changes were applied. Signed-off-by: NSebastian Ott <sebott@linux.vnet.ibm.com> Signed-off-by: NMartin Schwidefsky <schwidefsky@de.ibm.com>
-
- 11 10月, 2008 1 次提交
-
-
由 Cornelia Huck 提交于
Convert most s390 users setting bus_id to dev_set_name(). css and ccw busses are deferred since they need some special treatment. Signed-off-by: NCornelia Huck <cornelia.huck@de.ibm.com> Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de> Signed-off-by: NMartin Schwidefsky <schwidefsky@de.ibm.com>
-
- 09 9月, 2008 1 次提交
-
-
由 Cornelia Huck 提交于
Fix cleanup on error in chp_new() and init_channel_subsystem() (must not call kfree() on structures that had been registered). Signed-off-by: NCornelia Huck <cornelia.huck@de.ibm.com> Signed-off-by: NMartin Schwidefsky <schwidefsky@de.ibm.com>
-
- 22 8月, 2008 1 次提交
-
-
由 Peter Oberparleiter 提交于
Calling a ccw driver's notify function without the ccw device lock held opens up a race window between discovery and handling of a change in the device operational state. As a result, the device driver may encounter unexpected device malfunction, leading to out-of-retry situations or similar. Remove race by extending the ccw device lock from state change discovery to the calling of the notify function. Signed-off-by: NPeter Oberparleiter <peter.oberparleiter@de.ibm.com> Signed-off-by: NMartin Schwidefsky <schwidefsky@de.ibm.com>
-
- 14 7月, 2008 11 次提交
-
-
由 Sebastian Ott 提交于
In some cases where the channel subsystem decides to drop a subchannel device device_unregister may be called twice, which results in an oops. The patch prevents this by only unregistering registered devices. Signed-off-by: NSebastian Ott <sebott@linux.vnet.ibm.com> Signed-off-by: NHeiko Carstens <heiko.carstens@de.ibm.com> Signed-off-by: NMartin Schwidefsky <schwidefsky@de.ibm.com>
-
由 Cornelia Huck 提交于
css_device_id exists, so use it for determining the right driver (and add a match_flags which is always 1 for valid types). Signed-off-by: NCornelia Huck <cornelia.huck@de.ibm.com> Signed-off-by: NMartin Schwidefsky <schwidefsky@de.ibm.com> Signed-off-by: NHeiko Carstens <heiko.carstens@de.ibm.com>
-
由 Cornelia Huck 提交于
Use the new isc registration functions for all places that need an I/O interruption subclass. Signed-off-by: NCornelia Huck <cornelia.huck@de.ibm.com> Signed-off-by: NMartin Schwidefsky <schwidefsky@de.ibm.com> Signed-off-by: NHeiko Carstens <heiko.carstens@de.ibm.com>
-
由 Cornelia Huck 提交于
Replace the numeric values for I/O interruption subclass usage with abstract definitions and collect them all in asm/isc.h. This gives us a better overview of which iscs are actually used and makes it possible to better spread out isc usage in the future. Signed-off-by: NCornelia Huck <cornelia.huck@de.ibm.com> Signed-off-by: NMartin Schwidefsky <schwidefsky@de.ibm.com> Signed-off-by: NHeiko Carstens <heiko.carstens@de.ibm.com>
-
由 Cornelia Huck 提交于
Checking for the validity of the css_*_characteristics is superfluous since they stay 0 for non-successful scsc. Signed-off-by: NCornelia Huck <cornelia.huck@de.ibm.com> Signed-off-by: NMartin Schwidefsky <schwidefsky@de.ibm.com> Signed-off-by: NHeiko Carstens <heiko.carstens@de.ibm.com>
-
由 Cornelia Huck 提交于
Signed-off-by: NCornelia Huck <cornelia.huck@de.ibm.com> Signed-off-by: NMartin Schwidefsky <schwidefsky@de.ibm.com> Signed-off-by: NHeiko Carstens <heiko.carstens@de.ibm.com>
-
由 Cornelia Huck 提交于
Signed-off-by: NCornelia Huck <cornelia.huck@de.ibm.com> Signed-off-by: NMartin Schwidefsky <schwidefsky@de.ibm.com> Signed-off-by: NHeiko Carstens <heiko.carstens@de.ibm.com>
-
由 Cornelia Huck 提交于
Eliminate the need for the machine check handler to call into the common I/O layer directly by introducing an interface to register handlers for crws per rsc. Signed-off-by: NCornelia Huck <cornelia.huck@de.ibm.com> Signed-off-by: NMartin Schwidefsky <schwidefsky@de.ibm.com> Signed-off-by: NHeiko Carstens <heiko.carstens@de.ibm.com>
-
由 Cornelia Huck 提交于
Rework the css driver methods to provide sane callbacks for subchannels of all types. As a bonus, this cleans up and simplyfies the machine check handling for I/O subchannels a lot. Signed-off-by: NCornelia Huck <cornelia.huck@de.ibm.com> Signed-off-by: NMartin Schwidefsky <schwidefsky@de.ibm.com> Signed-off-by: NHeiko Carstens <heiko.carstens@de.ibm.com>
-
由 Cornelia Huck 提交于
Add modalias and subchannel type attributes for all subchannels. I/O subchannel specific attributes are now created in io_subchannel_probe(). modalias and subchannel type are also added to the uevent for the css bus. Also make the css modalias known. Signed-off-by: NCornelia Huck <cornelia.huck@de.ibm.com> Signed-off-by: NMartin Schwidefsky <schwidefsky@de.ibm.com> Signed-off-by: NHeiko Carstens <heiko.carstens@de.ibm.com>
-
由 Cornelia Huck 提交于
Register all valid subchannels, not only I/O subchannels. Move I/O subchannel specific initialization to io_subchannel_probe(). Signed-off-by: NCornelia Huck <cornelia.huck@de.ibm.com> Signed-off-by: NMartin Schwidefsky <schwidefsky@de.ibm.com> Signed-off-by: NHeiko Carstens <heiko.carstens@de.ibm.com>
-
- 07 5月, 2008 1 次提交
-
-
由 Michael Ernst 提交于
The only sporadically used CIO_DEBUG messages are replaced by ordinary CIO_MSG_EVENT messages. The CIO_MSG_EVENT messages debug levels are consolidated. Signed-off-by: NMichael Ernst <mernst@de.ibm.com> Signed-off-by: NMartin Schwidefsky <schwidefsky@de.ibm.com>
-
- 30 4月, 2008 1 次提交
-
-
由 Cornelia Huck 提交于
Make parsing of attribute writes handle incorrect input better. Signed-off-by: NCornelia Huck <cornelia.huck@de.ibm.com> Signed-off-by: NMartin Schwidefsky <schwidefsky@de.ibm.com>
-
- 17 4月, 2008 2 次提交
-
-
由 Michael Ernst 提交于
It is now possible to trigger cm_enable processing several times in parallel without causing a kernel panic. Signed-off-by: NMichael Ernst <mernst@de.ibm.com> Signed-off-by: NMartin Schwidefsky <schwidefsky@de.ibm.com> Signed-off-by: NHeiko Carstens <heiko.carstens@de.ibm.com>
-
由 Cornelia Huck 提交于
Make sure we wait for previous evaluations triggered by path state changes to have settled before we manipulate path states again. Signed-off-by: NCornelia Huck <cornelia.huck@de.ibm.com> Signed-off-by: NMartin Schwidefsky <schwidefsky@de.ibm.com> Signed-off-by: NHeiko Carstens <heiko.carstens@de.ibm.com>
-
- 26 1月, 2008 8 次提交
-
-
由 Peter Oberparleiter 提交于
Minimize calls to cpu intensive function get_subchannel_by_schid() by introducing function for_each_subchannel_staged() which temporarily caches the information about registered subchannels in a bitmap. Signed-off-by: NPeter Oberparleiter <peter.oberparleiter@de.ibm.com> Signed-off-by: NMartin Schwidefsky <schwidefsky@de.ibm.com>
-
由 Cornelia Huck 提交于
Set the owner field in the embedded struct device_driver to the value provided in the {css,ccw,ccwgroup}_driver. Signed-off-by: NCornelia Huck <cornelia.huck@de.ibm.com> Signed-off-by: NMartin Schwidefsky <schwidefsky@de.ibm.com>
-
由 Cornelia Huck 提交于
Some fields may be !0 only for I/O subchannels. Add some checks where required. Also adapt cio_enable_subchannel() to make the caller specify the intparm, which makes it more generic. Signed-off-by: NCornelia Huck <cornelia.huck@de.ibm.com> Signed-off-by: NMartin Schwidefsky <schwidefsky@de.ibm.com>
-
由 Cornelia Huck 提交于
Introduce a private pointer in struct subchannel to store per-subchannel type data (cannot use dev->priv since this is already used for something else). Create a new header io_sch.h for I/O subchannel specific structures and instructions. Signed-off-by: NCornelia Huck <cornelia.huck@de.ibm.com> Signed-off-by: NMartin Schwidefsky <schwidefsky@de.ibm.com>
-
由 Cornelia Huck 提交于
Add wrapper functions for driver_register and driver_unregister so that css drivers don't need to muck with struct device_driver directly. Signed-off-by: NCornelia Huck <cornelia.huck@de.ibm.com> Signed-off-by: NMartin Schwidefsky <schwidefsky@de.ibm.com>
-
由 Cornelia Huck 提交于
sch->driver needs to be reset to NULL on failed probe and after remove. We also need to check for sch->driver on shutdown. Signed-off-by: NCornelia Huck <cornelia.huck@de.ibm.com> Signed-off-by: NMartin Schwidefsky <schwidefsky@de.ibm.com>
-
由 Cornelia Huck 提交于
Make all callbacks in css_driver take a struct subchannel (and not a struct device). Signed-off-by: NCornelia Huck <cornelia.huck@de.ibm.com> Signed-off-by: NMartin Schwidefsky <schwidefsky@de.ibm.com>
-
由 Cornelia Huck 提交于
- Introduce to_cssdriver. - Use to_xxx instead of container_of where possible. Signed-off-by: NCornelia Huck <cornelia.huck@de.ibm.com> Signed-off-by: NMartin Schwidefsky <schwidefsky@de.ibm.com>
-
- 04 12月, 2007 1 次提交
-
-
由 Peter Oberparleiter 提交于
Add loop end statement to prevent looping over empty subchannel sets. Signed-off-by: NPeter Oberparleiter <peter.oberparleiter@de.ibm.com> Signed-off-by: NMartin Schwidefsky <schwidefsky@de.ibm.com>
-
- 20 11月, 2007 1 次提交
-
-
由 Cornelia Huck 提交于
Make sure all subchannel handling is done on the slow path workqueue so that we don't have races between an old subchannel unregistering and a new subchannel with the same name registering. Signed-off-by: NCornelia Huck <cornelia.huck@de.ibm.com> Signed-off-by: NMartin Schwidefsky <schwidefsky@de.ibm.com>
-