There is now a way to ensure all platform devices get a unique name when
populated from the device tree, and the DCR_NATIVE code path is broken
anyway. PowerPC Cell (PS3) is the only platform that actually uses this
path.  Most likely nobody will notice if it is killed. Remove the code
and associated ugly #ifdef.

The user-visible impact of this patch is that any DCR device on Cell
will get a new name in the /sys/devices hierarchy.
Signed-off-by: NGrant Likely <grant.likely@linaro.org>
Cc: Rob Herring <robh@kernel.org>
Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org>

Besides other potential problems, if MPIC_NO_RESET is  not set,
the error interrupt will be masked after it is requested.
Signed-off-by: NScott Wood <scottwood@freescale.com>

PCI controller disable PME message report feature, that shouldn't
have happened. Fix it and enable PME message report feature.
Signed-off-by: NWang Dongsheng <dongsheng.wang@freescale.com>
Signed-off-by: NScott Wood <scottwood@freescale.com>

There are error parameters should be corrected when
calling dma_free_coherent to free rmu rx-ring buffers
in fsl_open_inb_mbox() function.
Signed-off-by: NLiu Gang <Gang.Liu@freescale.com>
Reported-by: NDan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: NScott Wood <scottwood@freescale.com>

Several of the error paths from fsl_rio_setup are missing error
messages.

Worse, fsl_rio_setup initializes several global pointers and does not
NULL them out after freeing/unmapping on error.  This caused
fsl_rio_mcheck_exception() to crash when accessing rio_regs_win which
was non-NULL but had been unmapped.
Signed-off-by: NScott Wood <scottwood@freescale.com>
Cc: Liu Gang <Gang.Liu@freescale.com>
---
Liu Gang, are you sure all of these error conditions are fatal?  Why
does the rio driver fail if rmu is not present (e.g.  on t4240)?

The PPC476GTR SoC supports message signalled interrupts (MSI) by writing
to special addresses within the High Speed Transfer Assist (HSTA) module.

This patch adds support for PCI MSI with a new system device. The DMA
window is also updated to allow access to the entire 42-bit address range
to allow PCI devices write access to the HSTA module.
Signed-off-by: NAlistair Popple <alistair@popple.id.au>
Signed-off-by: NBenjamin Herrenschmidt <benh@kernel.crashing.org>

This patch adds support for the IBM Akebono board.
Signed-off-by: NAlistair Popple <alistair@popple.id.au>
Signed-off-by: NBenjamin Herrenschmidt <benh@kernel.crashing.org>

This patch fixes this section mismatch:

WARNING: vmlinux.o(.text+0x1efc4): Section mismatch in reference from
the function apm821xx_pciex_init_port_hw() to the function
.init.text:ppc4xx_pciex_wait_on_sdr.isra.9()

The function apm821xx_pciex_init_port_hw() references the function
__init ppc4xx_pciex_wait_on_sdr.isra.9().  This is often because
apm821xx_pciex_init_port_hw lacks a __init annotation or the
annotation of ppc4xx_pciex_wait_on_sdr.isra.9 is wrong.

apm821xx_pciex_init_port_hw is only referenced by a struct in
__initdata, so it should be safe to add __init to
apm821xx_pciex_init_port_hw.
Signed-off-by: NAlistair Popple <alistair@popple.id.au>
Signed-off-by: NBenjamin Herrenschmidt <benh@kernel.crashing.org>

This patch uses of_node_init() to initialize the kobject in the fake
node used in test_of_node(), to avoid following kobject warning.

[    0.897654] kobject: '(null)' (c0000007ca183a08): is not initialized, yet kobject_put() is being called.
[    0.897682] ------------[ cut here ]------------
[    0.897688] WARNING: at lib/kobject.c:670
[    0.897692] Modules linked in:
[    0.897701] CPU: 4 PID: 1 Comm: swapper/0 Not tainted 3.14.0+ #1
[    0.897708] task: c0000007ca100000 ti: c0000007ca180000 task.ti: c0000007ca180000
[    0.897715] NIP: c00000000046a1f0 LR: c00000000046a1ec CTR: 0000000001704660
[    0.897721] REGS: c0000007ca1835c0 TRAP: 0700   Not tainted  (3.14.0+)
[    0.897727] MSR: 8000000000029032 <SF,EE,ME,IR,DR,RI>  CR: 28000024  XER: 0000000d
[    0.897749] CFAR: c0000000008ef4ec SOFTE: 1
GPR00: c00000000046a1ec c0000007ca183840 c0000000014c59b8 000000000000005c
GPR04: 0000000000000001 c000000000129770 0000000000000000 0000000000000001
GPR08: 0000000000000000 0000000000000000 0000000000000000 0000000000003fef
GPR12: 0000000000000000 c00000000f221200 c00000000000c350 0000000000000000
GPR16: 0000000000000000 0000000000000000 0000000000000000 0000000000000000
GPR20: 0000000000000000 0000000000000000 0000000000000000 0000000000000000
GPR24: 0000000000000000 c00000000144e808 c000000000c56f20 00000000000000d8
GPR28: c000000000cd5058 0000000000000000 c000000001454ca8 c0000007ca183a08
[    0.897856] NIP [c00000000046a1f0] .kobject_put+0xa0/0xb0
[    0.897863] LR [c00000000046a1ec] .kobject_put+0x9c/0xb0
[    0.897868] Call Trace:
[    0.897874] [c0000007ca183840] [c00000000046a1ec] .kobject_put+0x9c/0xb0 (unreliable)
[    0.897885] [c0000007ca1838c0] [c000000000743f9c] .of_node_put+0x2c/0x50
[    0.897894] [c0000007ca183940] [c000000000c83954] .test_of_node+0x1dc/0x208
[    0.897902] [c0000007ca183b80] [c000000000c839a4] .msi_bitmap_selftest+0x24/0x38
[    0.897913] [c0000007ca183bf0] [c00000000000bb34] .do_one_initcall+0x144/0x200
[    0.897922] [c0000007ca183ce0] [c000000000c748e4] .kernel_init_freeable+0x2b4/0x394
[    0.897931] [c0000007ca183db0] [c00000000000c374] .kernel_init+0x24/0x130
[    0.897940] [c0000007ca183e30] [c00000000000a2f4] .ret_from_kernel_thread+0x5c/0x68
[    0.897947] Instruction dump:
[    0.897952] 7fe3fb78 38210080 e8010010 ebe1fff8 7c0803a6 4800014c e89f0000 3c62ff6e
[    0.897971] 7fe5fb78 3863a950 48485279 60000000 <0fe00000> 39000000 393f0038 4bffff80
[    0.897992] ---[ end trace 1eeffdb9f825a556 ]---
Signed-off-by: NLi Zhong <zhong@linux.vnet.ibm.com>
Signed-off-by: NBenjamin Herrenschmidt <benh@kernel.crashing.org>

This patch removes an artificial RapidIO bus root device and establishes
actual device hierarchy by providing reference to real parent devices.
It also introduces device class for RapidIO controller devices (on-chip
or an eternal bridge, known as "mport").

Existing implementation was sufficient for SoC-based platforms that have
a single RapidIO controller.  With introduction of devices using
multiple RapidIO controllers and PCIe-to-RapidIO bridges the old scheme
is very limiting or does not work at all.  The implemented changes allow
to properly reference platform's local RapidIO mport devices and provide
device details needed for upper layers.

This change to RapidIO device hierarchy does not break any known
existing kernel or user space interfaces.
Signed-off-by: NAlexandre Bounine <alexandre.bounine@idt.com>
Cc: Matt Porter <mporter@kernel.crashing.org>
Cc: Li Yang <leoli@freescale.com>
Cc: Kumar Gala <galak@kernel.crashing.org>
Cc: Andre van Herk <andre.van.herk@prodrive-technologies.com>
Cc: Stef van Os <stef.van.os@prodrive-technologies.com>
Cc: Jerry Jacobs <jerry.jacobs@prodrive-technologies.com>
Cc: Arno Tiemersma <arno.tiemersma@prodrive-technologies.com>
Cc: Rob Landley <rob@landley.net>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

If we do nothing in suspend/resume, some platform PCIe ip-block
can't guarantee the link back to L0 state from sleep, then, when
we read the EP device will hang. Only we send pme turnoff message
in pci controller suspend, and send pme exit message in resume, the
link state will be normal.

When we send pme turnoff message in pci controller suspend, the
links will into l2/l3 ready, then, host cannot communicate with
ep device, but pci-driver will call back EP device to save them
state. So we need to change platform_driver->suspend/resume to
syscore->suspend/resume.

So the new suspend/resume implementation, send pme turnoff message
in suspend, and send pme exit message in resume. And add a PME handler,
to response PME & message interrupt.

Change platform_driver->suspend/resume to syscore->suspend/resume.
pci-driver will call back EP device, to save EP state in
pci_pm_suspend_noirq, so we need to keep the link, until
pci_pm_suspend_noirq finish.
Signed-off-by: NWang Dongsheng <dongsheng.wang@freescale.com>
Signed-off-by: NScott Wood <scottwood@freescale.com>

For PEXCSRBAR, bit 3-0 indicate prefetchable and address type.
So when getting base address, these bits should be masked,
otherwise we may get incorrect base address.
Signed-off-by: NMinghuan Lian <Minghuan.Lian@freescale.com>
Signed-off-by: NScott Wood <scottwood@freescale.com>

Device tree nodes are already treated as objects, and we already want to
expose them to userspace which is done using the /proc filesystem today.
Right now the kernel has to do a lot of work to keep the /proc view in
sync with the in-kernel representation. If device_nodes are switched to
be kobjects then the device tree code can be a whole lot simpler. It
also turns out that switching to using /sysfs from /proc results in
smaller code and data size, and the userspace ABI won't change if
/proc/device-tree symlinks to /sys/firmware/devicetree/base.

v7: Add missing sysfs_bin_attr_init()
v6: Add __of_add_property() early init fixes from Pantelis
v5: Rename firmware/ofw to firmware/devicetree
    Fix updating property values in sysfs
v4: Fixed build error on Powerpc
    Fixed handling of dynamic nodes on powerpc
v3: Fixed handling of duplicate attribute and child node names
v2: switch to using sysfs bin_attributes which solve the problem of
    reporting incorrect property size.
Signed-off-by: NGrant Likely <grant.likely@secretlab.ca>
Tested-by: NSascha Hauer <s.hauer@pengutronix.de>
Cc: Rob Herring <rob.herring@calxeda.com>
Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Cc: David S. Miller <davem@davemloft.net>
Cc: Nathan Fontenot <nfont@linux.vnet.ibm.com>
Cc: Pantelis Antoniou <panto@antoniou-consulting.com>

I'm really grumpy about this one. The line:

#include "../../../kernel/irq/settings.h"

should have been an alarm sign for all people who added their SOB to
this trainwreck.

When I cleaned up the mess people made with interrupt descriptors a
few years ago, I warned that I'm going to hunt down new offenders and
treat them with stinking trouts. In this case I'll use frozen shark
for a better educational value.

The whole idiocy which was done there could have been avoided with two
lines of perfectly fine code. And do not complain about the lack of
correct examples in tree.

The solution is simple:

  Remove the brainfart and use the proper functions, which should
  have been used in the first place
Signed-off-by: NThomas Gleixner <tglx@linutronix.de>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Cc: Ashish Kalra <ashish.kalra@freescale.com>
Cc: Timur Tabi <timur@freescale.com>
Cc: Kumar Gala <galak@kernel.crashing.org>
Cc: ppc <linuxppc-dev@lists.ozlabs.org>
Link: http://lkml.kernel.org/r/20140223212736.451970660@linutronix.deSigned-off-by: NThomas Gleixner <tglx@linutronix.de>

 Freescale IFC controller has been used for mpc8xxx. It will be used
 for ARM-based SoC as well. This patch moves the driver to driver/memory
 and fix the header file includes.

  Also remove module_platform_driver() and  instead call
  platform_driver_register() from subsys_initcall() to make sure this module
  has been loaded before MTD partition parsing starts.
Signed-off-by: NPrabhakar Kushwaha <prabhakar@freescale.com>
Acked-by: NArnd Bergmann <arnd@arndb.de>
Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>

Commit 446f6d06 ("powerpc/mpic: Properly
set default triggers") breaks the mpc7447_hpc_defconfig as follows:

  CC      arch/powerpc/sysdev/mpic.o
arch/powerpc/sysdev/mpic.c: In function 'mpic_set_irq_type':
arch/powerpc/sysdev/mpic.c:886:9: error: case label does not reduce to an integer constant
arch/powerpc/sysdev/mpic.c:890:9: error: case label does not reduce to an integer constant
arch/powerpc/sysdev/mpic.c:894:9: error: case label does not reduce to an integer constant
arch/powerpc/sysdev/mpic.c:898:9: error: case label does not reduce to an integer constant

Looking at the cpp output (gcc 4.7.3), I see:

   case mpic->hw_set[MPIC_IDX_VECPRI_SENSE_EDGE] |
        mpic->hw_set[MPIC_IDX_VECPRI_POLARITY_POSITIVE]:

The pointer into an array appears because CONFIG_MPIC_WEIRD=y is set
for this platform, thus enabling the following:

  -------------------
  #ifdef CONFIG_MPIC_WEIRD
  static u32 mpic_infos[][MPIC_IDX_END] = {
        [0] = { /* Original OpenPIC compatible MPIC */

  [...]

  #define MPIC_INFO(name) mpic->hw_set[MPIC_IDX_##name]

  #else /* CONFIG_MPIC_WEIRD */

  #define MPIC_INFO(name) MPIC_##name

  #endif /* CONFIG_MPIC_WEIRD */
  -------------------

Here we convert the case section to if/else if, and also add
the equivalent of a default case to warn about unknown types.
Boot tested on sbc8548, build tested on all defconfigs.
Signed-off-by: NPaul Gortmaker <paul.gortmaker@windriver.com>
Signed-off-by: NBenjamin Herrenschmidt <benh@kernel.crashing.org>

Commit d0847757 switched the generic
powerpc iommu backend code to use the it_page_shift field to determine
page size. Commit 3a553170 should have
initiliased this field for all platforms, however the DART iommu table
code was not updated.

This commit initialises the it_page_shift field to 4K for the DART
iommu.
Signed-off-by: NAlistair Popple <alistair@popple.id.au>
Signed-off-by: NBenjamin Herrenschmidt <benh@kernel.crashing.org>

device_type is deprecated. There is no need to check for it in device
driver code and no need to specify it in the device tree. Remove the
property from stock .dts files and remove the check for it from device
drivers. This change should be 100% backwards compatible with old device
trees.
Signed-off-by: NGrant Likely <grant.likely@linaro.org>
Cc: Rob Herring <rob.herring@calxeda.com>
Cc: Pawel Moll <pawel.moll@arm.com>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Ian Campbell <ijc+devicetree@hellion.org.uk>
Cc: Kumar Gala <galak@codeaurora.org>
Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org>

None of these files are actually using any __init type directives
and hence don't need to include <linux/init.h>.  Most are just a
left over from __devinit and __cpuinit removal, or simply due to
code getting copied from one driver to the next.

The one instance where we add an include for init.h covers off
a case where that file was implicitly getting it from another
header which itself didn't need it.
Signed-off-by: NPaul Gortmaker <paul.gortmaker@windriver.com>
Signed-off-by: NBenjamin Herrenschmidt <benh@kernel.crashing.org>

There are much pci compatible with version on existing platforms.
To stop putting version numbers in device tree later, we add a
generic compatible 'fsl,qoriq-pcie'.
The version number is readable directly from a register.
Signed-off-by: NShengzhou Liu <Shengzhou.Liu@freescale.com>
Signed-off-by: NScott Wood <scottwood@freescale.com>

On P1020, P1021, P1022, and P1023, eLBC event interrupts are routed
to internal interrupt 3 while ELBC error interrupts are routed to
internal interrupt 0.  We need to call request_irq for each.
Signed-off-by: NShaohui Xie <Shaohui.Xie@freescale.com>
Signed-off-by: NWang Dongsheng <dongsheng.wang@freescale.com>
Signed-off-by: NKumar Gala <galak@kernel.crashing.org>
[scottwood@freescale.com: reworded commit message and fixed author]
Signed-off-by: NScott Wood <scottwood@freescale.com>

In some cases tmp_sec may be greater than ticks, because in the process
of calculation ticks and tmp_sec will be rounded.
Signed-off-by: NWang Dongsheng <dongsheng.wang@freescale.com>
Signed-off-by: NScott Wood <scottwood@freescale.com>

When the timer GTCCR toggle bit is inverted, we calculated the rest
of the time is not accurate. So we need to ignore this bit.
Signed-off-by: NWang Dongsheng <dongsheng.wang@freescale.com>
Signed-off-by: NScott Wood <scottwood@freescale.com>

Moved the following functions out of the __init section:

   arch/powerpc/sysdev/fsl_pci.c      : fsl_add_bridge()
   arch/powerpc/sysdev/indirect_pci.c : setup_indirect_pci()

Those are referenced by arch/powerpc/sysdev/fsl_pci.c : fsl_pci_probe() when
compiling for Book E support.
Signed-off-by: NChristian Engelmayer <cengelma@gmx.at>
Signed-off-by: NScott Wood <scottwood@freescale.com>

Allocate enough memory for the ocm_block structure, not just a pointer
to it.
Signed-off-by: NIlia Mirkin <imirkin@alum.mit.edu>
Signed-off-by: NBenjamin Herrenschmidt <benh@kernel.crashing.org>

Use PCI standard marco dev_is_pci() instead of directly compare
pci_bus_type to check whether it is pci device.
Signed-off-by: NYijing Wang <wangyijing@huawei.com>
Signed-off-by: NBenjamin Herrenschmidt <benh@kernel.crashing.org>

We currently have a user visible CONFIG_POWERNV_MSI option, but it
doesn't actually disable MSI for powernv. The MSI code is always built,
what it does disable is the inclusion of the MSI bitmap code, which
leads to a build error.

eg, with PPC_POWERNV=y and POWERNV_MSI=n we get:

  arch/powerpc/platforms/built-in.o: In function `.pnv_teardown_msi_irqs':
  pci.c:(.text+0x3558): undefined reference to `.msi_bitmap_free_hwirqs'

We don't really need a POWERNV_MSI symbol, just have the MSI bitmap code
depend directly on PPC_POWERNV.
Signed-off-by: NMichael Ellerman <michael@ellerman.id.au>
Reviewed-by: NGavin Shan <shangw@linux.vnet.ibm.com>
Signed-off-by: NBenjamin Herrenschmidt <benh@kernel.crashing.org>

More prep work for immutable biovecs - with immutable bvecs drivers
won't be able to use the biovec directly, they'll need to use helpers
that take into account bio->bi_iter.bi_bvec_done.

This updates callers for the new usage without changing the
implementation yet.
Signed-off-by: NKent Overstreet <kmo@daterainc.com>
Cc: Jens Axboe <axboe@kernel.dk>
Cc: Geert Uytterhoeven <geert@linux-m68k.org>
Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Cc: Paul Mackerras <paulus@samba.org>
Cc: "Ed L. Cashin" <ecashin@coraid.com>
Cc: Nick Piggin <npiggin@kernel.dk>
Cc: Lars Ellenberg <drbd-dev@lists.linbit.com>
Cc: Jiri Kosina <jkosina@suse.cz>
Cc: Paul Clements <Paul.Clements@steeleye.com>
Cc: Jim Paris <jim@jtan.com>
Cc: Geoff Levand <geoff@infradead.org>
Cc: Yehuda Sadeh <yehuda@inktank.com>
Cc: Sage Weil <sage@inktank.com>
Cc: Alex Elder <elder@inktank.com>
Cc: ceph-devel@vger.kernel.org
Cc: Joshua Morris <josh.h.morris@us.ibm.com>
Cc: Philip Kelleher <pjk1939@linux.vnet.ibm.com>
Cc: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com>
Cc: Jeremy Fitzhardinge <jeremy@goop.org>
Cc: Neil Brown <neilb@suse.de>
Cc: Martin Schwidefsky <schwidefsky@de.ibm.com>
Cc: Heiko Carstens <heiko.carstens@de.ibm.com>
Cc: linux390@de.ibm.com
Cc: Nagalakshmi Nandigama <Nagalakshmi.Nandigama@lsi.com>
Cc: Sreekanth Reddy <Sreekanth.Reddy@lsi.com>
Cc: support@lsi.com
Cc: "James E.J. Bottomley" <JBottomley@parallels.com>
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Cc: Alexander Viro <viro@zeniv.linux.org.uk>
Cc: Steven Whitehouse <swhiteho@redhat.com>
Cc: Herton Ronaldo Krzesinski <herton.krzesinski@canonical.com>
Cc: Tejun Heo <tj@kernel.org>
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: Guo Chao <yan@linux.vnet.ibm.com>
Cc: Asai Thambi S P <asamymuthupa@micron.com>
Cc: Selvan Mani <smani@micron.com>
Cc: Sam Bradshaw <sbradshaw@micron.com>
Cc: Matthew Wilcox <matthew.r.wilcox@intel.com>
Cc: Keith Busch <keith.busch@intel.com>
Cc: Stephen Hemminger <shemminger@vyatta.com>
Cc: Quoc-Son Anh <quoc-sonx.anh@intel.com>
Cc: Sebastian Ott <sebott@linux.vnet.ibm.com>
Cc: Nitin Gupta <ngupta@vflare.org>
Cc: Minchan Kim <minchan@kernel.org>
Cc: Jerome Marchand <jmarchan@redhat.com>
Cc: Seth Jennings <sjenning@linux.vnet.ibm.com>
Cc: "Martin K. Petersen" <martin.petersen@oracle.com>
Cc: Mike Snitzer <snitzer@redhat.com>
Cc: Vivek Goyal <vgoyal@redhat.com>
Cc: "Darrick J. Wong" <darrick.wong@oracle.com>
Cc: Chris Metcalf <cmetcalf@tilera.com>
Cc: Jan Kara <jack@suse.cz>
Cc: linux-m68k@lists.linux-m68k.org
Cc: linuxppc-dev@lists.ozlabs.org
Cc: drbd-user@lists.linbit.com
Cc: nbd-general@lists.sourceforge.net
Cc: cbe-oss-dev@lists.ozlabs.org
Cc: xen-devel@lists.xensource.com
Cc: virtualization@lists.linux-foundation.org
Cc: linux-raid@vger.kernel.org
Cc: linux-s390@vger.kernel.org
Cc: DL-MPTFusionLinux@lsi.com
Cc: linux-scsi@vger.kernel.org
Cc: devel@driverdev.osuosl.org
Cc: linux-fsdevel@vger.kernel.org
Cc: cluster-devel@redhat.com
Cc: linux-mm@kvack.org
Acked-by: NGeoff Levand <geoff@infradead.org>

Immutable biovecs are going to require an explicit iterator. To
implement immutable bvecs, a later patch is going to add a bi_bvec_done
member to this struct; for now, this patch effectively just renames
things.
Signed-off-by: NKent Overstreet <kmo@daterainc.com>
Cc: Jens Axboe <axboe@kernel.dk>
Cc: Geert Uytterhoeven <geert@linux-m68k.org>
Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Cc: Paul Mackerras <paulus@samba.org>
Cc: "Ed L. Cashin" <ecashin@coraid.com>
Cc: Nick Piggin <npiggin@kernel.dk>
Cc: Lars Ellenberg <drbd-dev@lists.linbit.com>
Cc: Jiri Kosina <jkosina@suse.cz>
Cc: Matthew Wilcox <willy@linux.intel.com>
Cc: Geoff Levand <geoff@infradead.org>
Cc: Yehuda Sadeh <yehuda@inktank.com>
Cc: Sage Weil <sage@inktank.com>
Cc: Alex Elder <elder@inktank.com>
Cc: ceph-devel@vger.kernel.org
Cc: Joshua Morris <josh.h.morris@us.ibm.com>
Cc: Philip Kelleher <pjk1939@linux.vnet.ibm.com>
Cc: Rusty Russell <rusty@rustcorp.com.au>
Cc: "Michael S. Tsirkin" <mst@redhat.com>
Cc: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com>
Cc: Jeremy Fitzhardinge <jeremy@goop.org>
Cc: Neil Brown <neilb@suse.de>
Cc: Alasdair Kergon <agk@redhat.com>
Cc: Mike Snitzer <snitzer@redhat.com>
Cc: dm-devel@redhat.com
Cc: Martin Schwidefsky <schwidefsky@de.ibm.com>
Cc: Heiko Carstens <heiko.carstens@de.ibm.com>
Cc: linux390@de.ibm.com
Cc: Boaz Harrosh <bharrosh@panasas.com>
Cc: Benny Halevy <bhalevy@tonian.com>
Cc: "James E.J. Bottomley" <JBottomley@parallels.com>
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Cc: "Nicholas A. Bellinger" <nab@linux-iscsi.org>
Cc: Alexander Viro <viro@zeniv.linux.org.uk>
Cc: Chris Mason <chris.mason@fusionio.com>
Cc: "Theodore Ts'o" <tytso@mit.edu>
Cc: Andreas Dilger <adilger.kernel@dilger.ca>
Cc: Jaegeuk Kim <jaegeuk.kim@samsung.com>
Cc: Steven Whitehouse <swhiteho@redhat.com>
Cc: Dave Kleikamp <shaggy@kernel.org>
Cc: Joern Engel <joern@logfs.org>
Cc: Prasad Joshi <prasadjoshi.linux@gmail.com>
Cc: Trond Myklebust <Trond.Myklebust@netapp.com>
Cc: KONISHI Ryusuke <konishi.ryusuke@lab.ntt.co.jp>
Cc: Mark Fasheh <mfasheh@suse.com>
Cc: Joel Becker <jlbec@evilplan.org>
Cc: Ben Myers <bpm@sgi.com>
Cc: xfs@oss.sgi.com
Cc: Steven Rostedt <rostedt@goodmis.org>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Len Brown <len.brown@intel.com>
Cc: Pavel Machek <pavel@ucw.cz>
Cc: "Rafael J. Wysocki" <rjw@sisk.pl>
Cc: Herton Ronaldo Krzesinski <herton.krzesinski@canonical.com>
Cc: Ben Hutchings <ben@decadent.org.uk>
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: Guo Chao <yan@linux.vnet.ibm.com>
Cc: Tejun Heo <tj@kernel.org>
Cc: Asai Thambi S P <asamymuthupa@micron.com>
Cc: Selvan Mani <smani@micron.com>
Cc: Sam Bradshaw <sbradshaw@micron.com>
Cc: Wei Yongjun <yongjun_wei@trendmicro.com.cn>
Cc: "Roger Pau Monné" <roger.pau@citrix.com>
Cc: Jan Beulich <jbeulich@suse.com>
Cc: Stefano Stabellini <stefano.stabellini@eu.citrix.com>
Cc: Ian Campbell <Ian.Campbell@citrix.com>
Cc: Sebastian Ott <sebott@linux.vnet.ibm.com>
Cc: Christian Borntraeger <borntraeger@de.ibm.com>
Cc: Minchan Kim <minchan@kernel.org>
Cc: Jiang Liu <jiang.liu@huawei.com>
Cc: Nitin Gupta <ngupta@vflare.org>
Cc: Jerome Marchand <jmarchand@redhat.com>
Cc: Joe Perches <joe@perches.com>
Cc: Peng Tao <tao.peng@emc.com>
Cc: Andy Adamson <andros@netapp.com>
Cc: fanchaoting <fanchaoting@cn.fujitsu.com>
Cc: Jie Liu <jeff.liu@oracle.com>
Cc: Sunil Mushran <sunil.mushran@gmail.com>
Cc: "Martin K. Petersen" <martin.petersen@oracle.com>
Cc: Namjae Jeon <namjae.jeon@samsung.com>
Cc: Pankaj Kumar <pankaj.km@samsung.com>
Cc: Dan Magenheimer <dan.magenheimer@oracle.com>
Cc: Mel Gorman <mgorman@suse.de>6

Commit b5b4bb3f (of: only include prom.h on sparc) removed implicit
includes of of_*.h headers by powerpc's prom.h. Some components were
missed in initial clean-up patch, so add the necessary includes to fix
powerpc builds.
Signed-off-by: NRob Herring <rob.herring@calxeda.com>
Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Tejun Heo <tj@kernel.org>
Cc: Matt Mackall <mpm@selenic.com>
Cc: Herbert Xu <herbert@gondor.apana.org.au>
Cc: "David S. Miller" <davem@davemloft.net>
Cc: Vinod Koul <vinod.koul@intel.com>
Cc: Dan Williams <dan.j.williams@intel.com>
Cc: linuxppc-dev@lists.ozlabs.org
Cc: linux-ide@vger.kernel.org
Cc: linux-crypto@vger.kernel.org

The current debugfs interface to scom is essentially unused
and racy. It uses two different files "address" and "data"
to perform accesses which is at best impractical for anything
but manual use by a developer.

This replaces it with an "access" file which represent the entire
scom address space which can be lseek/read/writen too.

This file only supports accesses that are 8 bytes aligned and
multiple of 8 bytes in size. The offset is logically the SCOM
address multiplied by 8.

Since nothing in userspace exploits that file at the moment, the ABI
change is a no-brainer.
Signed-off-by: NBenjamin Herrenschmidt <benh@kernel.crashing.org>

Several functions are only ever referenced locally, so make them static.
Of those functions, many of them are protected by an #if. However, the
code which can compile fine in either case.

Now that (1) the unneeded code is marked 'static' and (2) the code is
only used under a C 'if (IS_ENABLED(CONFIG_FB_FSL_DIU))', the compiler
can automatically remove the unneeded code, and we don't need the #if or
the empty stub functions.
Signed-off-by: NBrian Norris <computersforpeace@gmail.com>
Signed-off-by: NAnatolij Gustschin <agust@denx.de>

In case of error, the function platform_device_register_simple() returns
RR_PTR() and never returns NULL. The NULL test in the return value check
should be replaced with IS_ERR().
Signed-off-by: NWei Yongjun <yongjun_wei@trendmicro.com.cn>
Signed-off-by: NScott Wood <scottwood@freescale.com>

Freescale platform has class code = 0x0b2000, when it boots. This makes
kernel PCI bus code to setup these devices resulting into the following
notice information when trying to enable them:

pci 0000:00:00.0: ignoring class 0x0b2000 (doesn't match header type 01)

The above information is outputted by judging value of dev->class before
pci_setup_device() function, and the DECLARE_PCI_FIXUP_HEADER quirk runs
after pci_setup_device() function. But the DECLARE_PCI_FIXUP_EARLY quirk
runs before judging value of dev->class and pci_setup_device() function.
So we use the DECLARE_PCI_FIXUP_EARLY macro to fix this issue.
Signed-off-by: NChunhe Lan <Chunhe.Lan@freescale.com>
Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Cc: Bjorn Helgaas <bhelgaas@google.com>
Cc: Paul Mackerras <paulus@samba.org>
Signed-off-by: NScott Wood <scottwood@freescale.com>

Replace some instances of of_irq_map_one()/irq_create_of_mapping() and
of_irq_to_resource() by the simpler equivalent irq_of_parse_and_map().
Signed-off-by: NThierry Reding <treding@nvidia.com>
Acked-by: NRob Herring <rob.herring@calxeda.com>
[grant.likely: resolved conflicts with core code renames]
Signed-off-by: NGrant Likely <grant.likely@linaro.org>

struct of_irq and struct of_phandle_args are exactly the same structure.
This patch makes the kernel use of_phandle_args everywhere. This in
itself isn't a big deal, but it makes some follow-on patches simpler.
Signed-off-by: NGrant Likely <grant.likely@linaro.org>
Acked-by: NMichal Simek <monstr@monstr.eu>
Acked-by: NTony Lindgren <tony@atomide.com>
Cc: Russell King <linux@arm.linux.org.uk>
Cc: Ralf Baechle <ralf@linux-mips.org>
Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org>

The OF irq handling code has been overloading the term 'map' to refer to
both parsing the data in the device tree and mapping it to the internal
linux irq system. This is probably because the device tree does have the
concept of an 'interrupt-map' function for translating interrupt
references from one node to another, but 'map' is still confusing when
the primary purpose of some of the functions are to parse the DT data.

This patch renames all the of_irq_map_* functions to of_irq_parse_*
which makes it clear that there is a difference between the parsing
phase and the mapping phase. Kernel code can make use of just the
parsing or just the mapping support as needed by the subsystem.

The patch was generated mechanically with a handful of sed commands.
Signed-off-by: NGrant Likely <grant.likely@linaro.org>
Acked-by: NMichal Simek <monstr@monstr.eu>
Acked-by: NTony Lindgren <tony@atomide.com>
Cc: Ralf Baechle <ralf@linux-mips.org>
Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org>

This is the traditional name for device-tree path, used in sysfs,
do the same for the XSCOM debugfs files.
Signed-off-by: NBenjamin Herrenschmidt <benh@kernel.crashing.org>

Signed-off-by: NBenjamin Herrenschmidt <benh@kernel.crashing.org>

When creating the debugfs scom files, use "ibm,chip-id" as the scom%d
index rather than a simple made up number when possible.
Signed-off-by: NBenjamin Herrenschmidt <benh@kernel.crashing.org>