Use refcount_t rather than atomic_t in afs to make use of the count
checking facilities provided.
Signed-off-by: NDavid Howells <dhowells@redhat.com>
Reviewed-by: NMarc Dionne <marc.dionne@auristor.com>
cc: linux-afs@lists.infradead.org
Link: https://lore.kernel.org/r/165911277768.3745403.423349776836296452.stgit@warthog.procyon.org.uk/ # v1

Fix the coherency management of mmap'd data such that 3rd-party changes
become visible as soon as possible after the callback notification is
delivered by the fileserver.  This is done by the following means:

 (1) When we break a callback on a vnode specified by the CB.CallBack call
     from the server, we queue a work item (vnode->cb_work) to go and
     clobber all the PTEs mapping to that inode.

     This causes the CPU to trip through the ->map_pages() and
     ->page_mkwrite() handlers if userspace attempts to access the page(s)
     again.

     (Ideally, this would be done in the service handler for CB.CallBack,
     but the server is waiting for our reply before considering, and we
     have a list of vnodes, all of which need breaking - and the process of
     getting the mmap_lock and stripping the PTEs on all CPUs could be
     quite slow.)

 (2) Call afs_validate() from the ->map_pages() handler to check to see if
     the file has changed and to get a new callback promise from the
     server.

Also handle the fileserver telling us that it's dropping all callbacks,
possibly after it's been restarted by sending us a CB.InitCallBackState*
call by the following means:

 (3) Maintain a per-cell list of afs files that are currently mmap'd
     (cell->fs_open_mmaps).

 (4) Add a work item to each server that is invoked if there are any open
     mmaps when CB.InitCallBackState happens.  This work item goes through
     the aforementioned list and invokes the vnode->cb_work work item for
     each one that is currently using this server.

     This causes the PTEs to be cleared, causing ->map_pages() or
     ->page_mkwrite() to be called again, thereby calling afs_validate()
     again.

I've chosen to simply strip the PTEs at the point of notification reception
rather than invalidate all the pages as well because (a) it's faster, (b)
we may get a notification for other reasons than the data being altered (in
which case we don't want to clobber the pagecache) and (c) we need to ask
the server to find out - and I don't want to wait for the reply before
holding up userspace.

This was tested using the attached test program:

	#include <stdbool.h>
	#include <stdio.h>
	#include <stdlib.h>
	#include <unistd.h>
	#include <fcntl.h>
	#include <sys/mman.h>
	int main(int argc, char *argv[])
	{
		size_t size = getpagesize();
		unsigned char *p;
		bool mod = (argc == 3);
		int fd;
		if (argc != 2 && argc != 3) {
			fprintf(stderr, "Format: %s <file> [mod]\n", argv[0]);
			exit(2);
		}
		fd = open(argv[1], mod ? O_RDWR : O_RDONLY);
		if (fd < 0) {
			perror(argv[1]);
			exit(1);
		}

		p = mmap(NULL, size, mod ? PROT_READ|PROT_WRITE : PROT_READ,
			 MAP_SHARED, fd, 0);
		if (p == MAP_FAILED) {
			perror("mmap");
			exit(1);
		}
		for (;;) {
			if (mod) {
				p[0]++;
				msync(p, size, MS_ASYNC);
				fsync(fd);
			}
			printf("%02x", p[0]);
			fflush(stdout);
			sleep(1);
		}
	}

It runs in two modes: in one mode, it mmaps a file, then sits in a loop
reading the first byte, printing it and sleeping for a second; in the
second mode it mmaps a file, then sits in a loop incrementing the first
byte and flushing, then printing and sleeping.

Two instances of this program can be run on different machines, one doing
the reading and one doing the writing.  The reader should see the changes
made by the writer, but without this patch, they aren't because validity
checking is being done lazily - only on entry to the filesystem.

Testing the InitCallBackState change is more complicated.  The server has
to be taken offline, the saved callback state file removed and then the
server restarted whilst the reading-mode program continues to run.  The
client machine then has to poke the server to trigger the InitCallBackState
call.
Signed-off-by: NDavid Howells <dhowells@redhat.com>
Tested-by: NMarkus Suvanto <markus.suvanto@gmail.com>
cc: linux-afs@lists.infradead.org
Link: https://lore.kernel.org/r/163111668833.283156.382633263709075739.stgit@warthog.procyon.org.uk/

Don't give an assertion failure on unpurgeable afs_server records - which
kills the thread - but rather emit a trace line when we are purging a
record (which only happens during network namespace removal or rmmod) and
print a notice of the problem.
Signed-off-by: NDavid Howells <dhowells@redhat.com>

The fileserver probe timer, net->fs_probe_timer, isn't cancelled when
the kafs module is being removed and so the count it holds on
net->servers_outstanding doesn't get dropped..

This causes rmmod to wait forever.  The hung process shows a stack like:

	afs_purge_servers+0x1b5/0x23c [kafs]
	afs_net_exit+0x44/0x6e [kafs]
	ops_exit_list+0x72/0x93
	unregister_pernet_operations+0x14c/0x1ba
	unregister_pernet_subsys+0x1d/0x2a
	afs_exit+0x29/0x6f [kafs]
	__do_sys_delete_module.isra.0+0x1a2/0x24b
	do_syscall_64+0x51/0x95
	entry_SYSCALL_64_after_hwframe+0x44/0xa9

Fix this by:

 (1) Attempting to cancel the probe timer and, if successful, drop the
     count that the timer was holding.

 (2) Make the timer function just drop the count and not schedule the
     prober if the afs portion of net namespace is being destroyed.

Also, whilst we're at it, make the following changes:

 (3) Initialise net->servers_outstanding to 1 and decrement it before
     waiting on it so that it doesn't generate wake up events by being
     decremented to 0 until we're cleaning up.

 (4) Switch the atomic_dec() on ->servers_outstanding for ->fs_timer in
     afs_purge_servers() to use the helper function for that.

Fixes: f6cbb368 ("afs: Actively poll fileservers to maintain NAT or firewall openings")
Signed-off-by: NDavid Howells <dhowells@redhat.com>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

Don't use the running state for fileserver probes to make decisions about
which server to use as the state is cleared at the start of a probe and
also intermediate values might be misleading.

Instead, add a separate 'latest known' rtt in the afs_server struct and a
flag to indicate if the server is known to be responding and update these
as and when we know what to change them to.
Signed-off-by: NDavid Howells <dhowells@redhat.com>

Whilst it shouldn't happen, it is possible for multiple fileservers to
share a UUID, particularly if an entire cell has been duplicated, UUIDs and
all.  In such a case, it's not necessarily possible to map the effect of
the CB.InitCallBackState3 incoming RPC to a specific server unambiguously
by UUID and thus to a specific cell.

Indeed, there's a problem whereby multiple server records may need to
occupy the same spot in the rb_tree rooted in the afs_net struct.

Fix this by allowing servers to form a list, with the head of the list in
the tree.  When the front entry in the list is removed, the second in the
list just replaces it.  afs_init_callback_state() then just goes down the
line, poking each server in the list.

This means that some servers will be unnecessarily poked, unfortunately.
An alternative would be to route by call parameters.
Reported-by: NJeffrey Altman <jaltman@auristor.com>
Signed-off-by: NDavid Howells <dhowells@redhat.com>
Fixes: d2ddc776 ("afs: Overhaul volume and server record caching and fileserver rotation")

Reorganise afs_volume objects such that they're in a tree keyed on volume
ID, rooted at on an afs_cell object rather than being in multiple trees,
each of which is rooted on an afs_server object.

afs_server structs become per-cell and acquire a pointer to the cell.

The process of breaking a callback then starts with finding the server by
its network address, following that to the cell and then looking up each
volume ID in the volume tree.

This is simpler than the afs_vol_interest/afs_cb_interest N:M mapping web
and allows those structs and the code for maintaining them to be simplified
or removed.

It does make a couple of things a bit more tricky, though:

 (1) Operations now start with a volume, not a server, so there can be more
     than one answer as to whether or not the server we'll end up using
     supports the FS.InlineBulkStatus RPC.

 (2) CB RPC operations that specify the server UUID.  There's still a tree
     of servers by UUID on the afs_net struct, but the UUIDs in it aren't
     guaranteed unique.
Signed-off-by: NDavid Howells <dhowells@redhat.com>

Turn the afs_operation struct into the main way that most fileserver
operations are managed.  Various things are added to the struct, including
the following:

 (1) All the parameters and results of the relevant operations are moved
     into it, removing corresponding fields from the afs_call struct.
     afs_call gets a pointer to the op.

 (2) The target volume is made the main focus of the operation, rather than
     the target vnode(s), and a bunch of op->vnode->volume are made
     op->volume instead.

 (3) Two vnode records are defined (op->file[]) for the vnode(s) involved
     in most operations.  The vnode record (struct afs_vnode_param)
     contains:

	- The vnode pointer.

	- The fid of the vnode to be included in the parameters or that was
          returned in the reply (eg. FS.MakeDir).

	- The status and callback information that may be returned in the
     	  reply about the vnode.

	- Callback break and data version tracking for detecting
          simultaneous third-parth changes.

 (4) Pointers to dentries to be updated with new inodes.

 (5) An operations table pointer.  The table includes pointers to functions
     for issuing AFS and YFS-variant RPCs, handling the success and abort
     of an operation and handling post-I/O-lock local editing of a
     directory.

To make this work, the following function restructuring is made:

 (A) The rotation loop that issues calls to fileservers that can be found
     in each function that wants to issue an RPC (such as afs_mkdir()) is
     extracted out into common code, in a new file called fs_operation.c.

 (B) The rotation loops, such as the one in afs_mkdir(), are replaced with
     a much smaller piece of code that allocates an operation, sets the
     parameters and then calls out to the common code to do the actual
     work.

 (C) The code for handling the success and failure of an operation are
     moved into operation functions (as (5) above) and these are called
     from the core code at appropriate times.

 (D) The pseudo inode getting stuff used by the dynamic root code is moved
     over into dynroot.c.

 (E) struct afs_iget_data is absorbed into the operation struct and
     afs_iget() expects to be given an op pointer and a vnode record.

 (F) Point (E) doesn't work for the root dir of a volume, but we know the
     FID in advance (it's always vnode 1, unique 1), so a separate inode
     getter, afs_root_iget(), is provided to special-case that.

 (G) The inode status init/update functions now also take an op and a vnode
     record.

 (H) The RPC marshalling functions now, for the most part, just take an
     afs_operation struct as their only argument.  All the data they need
     is held there.  The result delivery functions write their answers
     there as well.

 (I) The call is attached to the operation and then the operation core does
     the waiting.

And then the new operation code is, for the moment, made to just initialise
the operation, get the appropriate vnode I/O locks and do the same rotation
loop as before.

This lays the foundation for the following changes in the future:

 (*) Overhauling the rotation (again).

 (*) Support for asynchronous I/O, where the fileserver rotation must be
     done asynchronously also.
Signed-off-by: NDavid Howells <dhowells@redhat.com>

As a prelude to implementing asynchronous fileserver operations in the afs
filesystem, rename struct afs_fs_cursor to afs_operation.

This struct is going to form the core of the operation management and is
going to acquire more members in later.
Signed-off-by: NDavid Howells <dhowells@redhat.com>

afs_vol_interest objects represent the volume IDs currently being accessed
from a fileserver.  These hold lists of afs_cb_interest objects that
repesent the superblocks using that volume ID on that server.

When a callback notification from the server telling of a modification by
another client arrives, the volume ID specified in the notification is
looked up in the server's afs_vol_interest list.  Through the
afs_cb_interest list, the relevant superblocks can be iterated over and the
specific inode looked up and marked in each one.

Make the following efficiency improvements:

 (1) Hold rcu_read_lock() over the entire processing rather than locking it
     each time.

 (2) Do all the callbacks for each vid together rather than individually.
     Each volume then only needs to be looked up once.

 (3) afs_vol_interest objects are now stored in an rb_tree rather than a
     flat list to reduce the lookup step count.

 (4) afs_vol_interest lookup is now done with RCU, but because it's in an
     rb_tree which may rotate under us, a seqlock is used so that if it
     changes during the walk, we repeat the walk with a lock held.

With this and the preceding patch which adds RCU-based lookups in the inode
cache, target volumes/vnodes can be taken without the need to take any
locks, except on the target itself.
Signed-off-by: NDavid Howells <dhowells@redhat.com>

When an AFS client accesses a file, it receives a limited-duration callback
promise that the server will notify it if another client changes a file.
This callback duration can be a few hours in length.

If a client mounts a volume and then an application prevents it from being
unmounted, say by chdir'ing into it, but then does nothing for some time,
the rxrpc_peer record will expire and rxrpc-level keepalive will cease.

If there is NAT or a firewall between the client and the server, the route
back for the server may close after a comparatively short duration, meaning
that attempts by the server to notify the client may then bounce.

The client, however, may (so far as it knows) still have a valid unexpired
promise and will then rely on its cached data and will not see changes made
on the server by a third party until it incidentally rechecks the status or
the promise needs renewal.

To deal with this, the client needs to regularly probe the server.  This
has two effects: firstly, it keeps a route open back for the server, and
secondly, it causes the server to disgorge any notifications that got
queued up because they couldn't be sent.

Fix this by adding a mechanism to emit regular probes.

Two levels of probing are made available: Under normal circumstances the
'slow' queue will be used for a fileserver - this just probes the preferred
address once every 5 mins or so; however, if server fails to respond to any
probes, the server will shift to the 'fast' queue from which all its
interfaces will be probed every 30s.  When it finally responds, the record
will switch back to the slow queue.

Further notes:

 (1) Probing is now no longer driven from the fileserver rotation
     algorithm.

 (2) Probes are dispatched to all interfaces on a fileserver when that an
     afs_server object is set up to record it.

 (3) The afs_server object is removed from the probe queues when we start
     to probe it.  afs_is_probing_server() returns true if it's not listed
     - ie. it's undergoing probing.

 (4) The afs_server object is added back on to the probe queue when the
     final outstanding probe completes, but the probed_at time is set when
     we're about to launch a probe so that it's not dependent on the probe
     duration.

 (5) The timer and the work item added for this must be handed a count on
     net->servers_outstanding, which they hand on or release.  This makes
     sure that network namespace cleanup waits for them.

Fixes: d2ddc776 ("afs: Overhaul volume and server record caching and fileserver rotation")
Reported-by: NDave Botsch <botsch@cnf.cornell.edu>
Signed-off-by: NDavid Howells <dhowells@redhat.com>

Split the usage count on the afs_server struct to have an active count that
registers who's actually using it separately from the reference count on
the object.

This allows a future patch to dispatch polling probes without advancing the
"unuse" time into the future each time we emit a probe, which would
otherwise prevent unused server records from expiring.

Included in this:

 (1) The latter part of afs_destroy_server() in which the RCU destruction
     of afs_server objects is invoked and the outstanding server count is
     decremented is split out into __afs_put_server().

 (2) afs_put_server() now calls __afs_put_server() rather then setting the
     management timer.

 (3) The calls begun by afs_fs_give_up_all_callbacks() and
     afs_fs_get_capabilities() can now take a ref on the server record, so
     afs_destroy_server() can just drop its ref and needn't wait for the
     completion of these calls.  They'll put the ref when they're done.

 (4) Because of (3), afs_fs_probe_done() no longer needs to wake up
     afs_destroy_server() with server->probe_outstanding.

 (5) afs_gc_servers can be simplified.  It only needs to check if
     server->active is 0 rather than playing games with the refcount.

 (6) afs_manage_servers() can propose a server for gc if usage == 0 rather
     than if ref == 1.  The gc is effected by (5).
Signed-off-by: NDavid Howells <dhowells@redhat.com>

The U-version VLDB volume record retrieved by the VL.GetEntryByNameU rpc op
carries a change counter (the serverUnique field) for each fileserver
listed in the record as backing that volume.  This is incremented whenever
the registration details for a fileserver change (such as its address
list).  Note that the same value will be seen in all UVLDB records that
refer to that fileserver.

This should be checked before calling the VL server to re-query the address
list for a fileserver.  If it's the same, there's no point doing the query.
Reported-by: NJeffrey Altman <jaltman@auristor.com>
Signed-off-by: NDavid Howells <dhowells@redhat.com>

When an operation is meant to be done uninterruptibly (such as
FS.StoreData), we should not be allowing volume and server record checking
to be interrupted.

Fixes: d2ddc776 ("afs: Overhaul volume and server record caching and fileserver rotation")
Signed-off-by: NDavid Howells <dhowells@redhat.com>

afs_find_server tries to find a server that has an address that
matches the transport address of an rxrpc peer.  The code assumes
that the transport address is always ipv6, with ipv4 represented
as ipv4 mapped addresses, but that's not the case.  If the transport
family is AF_INET, srx->transport.sin6.sin6_addr.s6_addr32[] will
be beyond the actual ipv4 address and will always be 0, and all
ipv4 addresses will be seen as matching.

As a result, the first ipv4 address seen on any server will be
considered a match, and the server returned may be the wrong one.

One of the consequences is that callbacks received over ipv4 will
only be correctly applied for the server that happens to have the
first ipv4 address on the fs_addresses4 list.  Callbacks over ipv4
from all other servers are dropped, causing the client to serve stale
data.

This is fixed by looking at the transport family, and comparing ipv4
addresses based on a sockaddr_in structure rather than a sockaddr_in6.

Fixes: d2ddc776 ("afs: Overhaul volume and server record caching and fileserver rotation")
Signed-off-by: NMarc Dionne <marc.dionne@auristor.com>
Signed-off-by: NDavid Howells <dhowells@redhat.com>

Fixes gcc '-Wunused-but-set-variable' warning:

fs/afs/server.c: In function afs_install_server:
fs/afs/server.c:157:6: warning: variable ret set but not used [-Wunused-but-set-variable]

It is not used since commit d2ddc776 ("afs:
Overhaul volume and server record caching and fileserver rotation")
Reported-by: NHulk Robot <hulkci@huawei.com>
Signed-off-by: Nzhengbin <zhengbin13@huawei.com>
Signed-off-by: NDavid Howells <dhowells@redhat.com>

Add a tracepoint (afs_server) to track the afs_server object usage count.
Signed-off-by: NDavid Howells <dhowells@redhat.com>

Based on 1 normalized pattern(s):

  this program is free software you can redistribute it and or modify
  it under the terms of the gnu general public license as published by
  the free software foundation either version 2 of the license or at
  your option any later version

extracted by the scancode license scanner the SPDX license identifier

  GPL-2.0-or-later

has been chosen to replace the boilerplate/reference in 3029 file(s).
Signed-off-by: NThomas Gleixner <tglx@linutronix.de>
Reviewed-by: NAllison Randal <allison@lohutok.net>
Cc: linux-spdx@vger.kernel.org
Link: https://lkml.kernel.org/r/20190527070032.746973796@linutronix.deSigned-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>

Make certain RPC operations non-interruptible, including:

 (*) Set attributes
 (*) Store data

     We don't want to get interrupted during a flush on close, flush on
     unlock, writeback or an inode update, leaving us in a state where we
     still need to do the writeback or update.

 (*) Extend lock
 (*) Release lock

     We don't want to get lock extension interrupted as the file locks on
     the server are time-limited.  Interruption during lock release is less
     of an issue since the lock is time-limited, but it's better to
     complete the release to avoid a several-minute wait to recover it.

     *Setting* the lock isn't a problem if it's interrupted since we can
      just return to the user and tell them they were interrupted - at
      which point they can elect to retry.

 (*) Silly unlink

     We want to remove silly unlink files if we can, rather than leaving
     them for the salvager to clear up.

Note that whilst these calls are no longer interruptible, they do have
timeouts on them, so if the server stops responding the call will fail with
something like ETIME or ECONNRESET.

Without this, the following:

	kAFS: Unexpected error from FS.StoreData -512

appears in dmesg when a pending store data gets interrupted and some
processes may just hang.

Additionally, make the code that checks/updates the server record ignore
failure due to interruption if the main call is uninterruptible and if the
server has an address list.  The next op will check it again since the
expiration time on the old list has past.

Fixes: d2ddc776 ("afs: Overhaul volume and server record caching and fileserver rotation")
Reported-by: NJonathan Billings <jsbillings@jsbillings.org>
Reported-by: NMarc Dionne <marc.dionne@auristor.com>
Signed-off-by: NDavid Howells <dhowells@redhat.com>

afs_check/update_server_record() should be setting fc->error rather than
fc->ac.error as they're called from within the cursor iteration function.

afs_fs_cursor::error is where the error code of the attempt to call the
operation on multiple servers is integrated and is the final result,
whereas afs_addr_cursor::error is used to hold the error from individual
iterations of the call loop.  (Note there's also an afs_vl_cursor which
also wraps afs_addr_cursor for accessing VL servers rather than file
servers).

Fix this by setting fc->error in the afs_check/update_server_record() so
that any error incurred whilst talking to the VL server correctly
propagates to the final result.

This results in:

	kAFS: Unexpected error from FS.StoreData -512

being seen, even though the store-data op is non-interruptible.  The error
is actually coming from the server record update getting interrupted.

Fixes: d2ddc776 ("afs: Overhaul volume and server record caching and fileserver rotation")
Signed-off-by: NDavid Howells <dhowells@redhat.com>

The in-kernel afs filesystem client counts the number of server-level
callback invalidation events (CB.InitCallBackState* RPC operations) that it
receives from the server.  This is stored in cb_s_break in various
structures, including afs_server and afs_vnode.

If an inode is examined by afs_validate(), say, the afs_server copy is
compared, along with other break counters, to those in afs_vnode, and if
one or more of the counters do not match, it is considered that the
server's callback promise is broken.  At points where this happens,
AFS_VNODE_CB_PROMISED is cleared to indicate that the status must be
refetched from the server.

afs_validate() issues an FS.FetchStatus operation to get updated metadata -
and based on the updated data_version may invalidate the pagecache too.

However, the break counters are also used to determine whether to note a
new callback in the vnode (which would set the AFS_VNODE_CB_PROMISED flag)
and whether to cache the permit data included in the YFSFetchStatus record
by the server.


The problem comes when the server sends us a CB.InitCallBackState op.  The
first such instance doesn't cause cb_s_break to be incremented, but rather
causes AFS_SERVER_FL_NEW to be cleared - but thereafter, say some hours
after last use and all the volumes have been automatically unmounted and
the server has forgotten about the client[*], this *will* likely cause an
increment.

 [*] There are other circumstances too, such as the server restarting or
     needing to make space in its callback table.

Note that the server won't send us a CB.InitCallBackState op until we talk
to it again.

So what happens is:

 (1) A mount for a new volume is attempted, a inode is created for the root
     vnode and vnode->cb_s_break and AFS_VNODE_CB_PROMISED aren't set
     immediately, as we don't have a nominated server to talk to yet - and
     we may iterate through a few to find one.

 (2) Before the operation happens, afs_fetch_status(), say, notes in the
     cursor (fc.cb_break) the break counter sum from the vnode, volume and
     server counters, but the server->cb_s_break is currently 0.

 (3) We send FS.FetchStatus to the server.  The server sends us back
     CB.InitCallBackState.  We increment server->cb_s_break.

 (4) Our FS.FetchStatus completes.  The reply includes a callback record.

 (5) xdr_decode_AFSCallBack()/xdr_decode_YFSCallBack() check to see whether
     the callback promise was broken by checking the break counter sum from
     step (2) against the current sum.

     This fails because of step (3), so we don't set the callback record
     and, importantly, don't set AFS_VNODE_CB_PROMISED on the vnode.

This does not preclude the syscall from progressing, and we don't loop here
rechecking the status, but rather assume it's good enough for one round
only and will need to be rechecked next time.

 (6) afs_validate() it triggered on the vnode, probably called from
     d_revalidate() checking the parent directory.

 (7) afs_validate() notes that AFS_VNODE_CB_PROMISED isn't set, so doesn't
     update vnode->cb_s_break and assumes the vnode to be invalid.

 (8) afs_validate() needs to calls afs_fetch_status().  Go back to step (2)
     and repeat, every time the vnode is validated.

This primarily affects volume root dir vnodes.  Everything subsequent to
those inherit an already incremented cb_s_break upon mounting.


The issue is that we assume that the callback record and the cached permit
information in a reply from the server can't be trusted after getting a
server break - but this is wrong since the server makes sure things are
done in the right order, holding up our ops if necessary[*].

 [*] There is an extremely unlikely scenario where a reply from before the
     CB.InitCallBackState could get its delivery deferred till after - at
     which point we think we have a promise when we don't.  This, however,
     requires unlucky mass packet loss to one call.

AFS_SERVER_FL_NEW tries to paper over the cracks for the initial mount from
a server we've never contacted before, but this should be unnecessary.
It's also further insulated from the problem on an initial mount by
querying the server first with FS.GetCapabilities, which triggers the
CB.InitCallBackState.


Fix this by

 (1) Remove AFS_SERVER_FL_NEW.

 (2) In afs_calc_vnode_cb_break(), don't include cb_s_break in the
     calculation.

 (3) In afs_cb_is_broken(), don't include cb_s_break in the check.
Signed-off-by: NDavid Howells <dhowells@redhat.com>

Send probes to all the unprobed fileservers in a fileserver list on all
addresses simultaneously in an attempt to find out the fastest route whilst
not getting stuck for 20s on any server or address that we don't get a
reply from.

This alleviates the problem whereby attempting to access a new server can
take a long time because the rotation algorithm ends up rotating through
all servers and addresses until it finds one that responds.
Signed-off-by: NDavid Howells <dhowells@redhat.com>

Eliminate the address pointer from the address list cursor as it's
redundant (ac->addrs[ac->index] can be used to find the same address) and
address lists must be replaced rather than being rearranged, so is of
limited value.
Signed-off-by: NDavid Howells <dhowells@redhat.com>

Implement support for talking to YFS-variant fileservers in the cache
manager and the filesystem client.  These implement upgraded services on
the same port as their AFS services.

YFS fileservers provide expanded capabilities over AFS.
Signed-off-by: NDavid Howells <dhowells@redhat.com>

Add a couple of tracepoints to log the production of I/O errors within the AFS
filesystem.
Signed-off-by: NDavid Howells <dhowells@redhat.com>

Track VL servers as independent entities rather than lumping all their
addresses together into one set and implement server-level rotation by:

 (1) Add the concept of a VL server list, where each server has its own
     separate address list.  This code is similar to the FS server list.

 (2) Use the DNS resolver to retrieve a set of servers and their associated
     addresses, ports, preference and weight ratings.

 (3) In the case of a legacy DNS resolver or an address list given directly
     through /proc/net/afs/cells, create a list containing just a dummy
     server record and attach all the addresses to that.

 (4) Implement a simple rotation policy, for the moment ignoring the
     priorities and weights assigned to the servers.

 (5) Show the address list through /proc/net/afs/<cell>/vlservers.  This
     also displays the source and status of the data as indicated by the
     upcall.
Signed-off-by: NDavid Howells <dhowells@redhat.com>

The recent patch to fix the afs_server struct leak didn't actually fix the
bug, but rather fixed some of the symptoms.  The problem is that an
asynchronous call that holds a resource pointed to by call->reply[0] will
find the pointer cleared in the call destructor, thereby preventing the
resource from being cleaned up.

In the case of the server record leak, the afs_fs_get_capabilities()
function in devel code sets up a call with reply[0] pointing at the server
record that should be altered when the result is obtained, but this was
being cleared before the destructor was called, so the put in the
destructor does nothing and the record is leaked.

Commit f014ffb0 removed the additional ref obtained by
afs_install_server(), but the removal of this ref is actually used by the
garbage collector to mark a server record as being defunct after the record
has expired through lack of use.

The offending clearance of call->reply[0] upon completion in
afs_process_async_call() has been there from the origin of the code, but
none of the asynchronous calls actually use that pointer currently, so it
should be safe to remove (note that synchronous calls don't involve this
function).

Fix this by the following means:

 (1) Revert commit f014ffb0.

 (2) Remove the clearance of reply[0] from afs_process_async_call().

Without this, afs_manage_servers() will suffer an assertion failure if it
sees a server record that didn't get used because the usage count is not 1.

Fixes: f014ffb0 ("afs: Fix afs_server struct leak")
Fixes: 08e0e7c8 ("[AF_RXRPC]: Make the in-kernel AFS filesystem use AF_RXRPC.")
Signed-off-by: NDavid Howells <dhowells@redhat.com>
Cc: stable <stable@vger.kernel.org>
Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>

Fix a leak of afs_server structs.  The routine that installs them in the
various lookup lists and trees gets a ref on leaving the function, whether
it added the server or a server already exists.  It shouldn't increment
the refcount if it added the server.

The effect of this that "rmmod kafs" will hang waiting for the leaked
server to become unused.

Fixes: d2ddc776 ("afs: Overhaul volume and server record caching and fileserver rotation")
Signed-off-by: NDavid Howells <dhowells@redhat.com>
Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>

At the moment, afs_break_callbacks calls afs_break_one_callback() for each
separate FID it was given, and the latter looks up the volume individually
for each one.

However, this is inefficient if two or more FIDs have the same vid as we
could reuse the volume.  This is complicated by cell aliasing whereby we
may have multiple cells sharing a volume and can therefore have multiple
callback interests for any particular volume ID.

At the moment afs_break_one_callback() scans the entire list of volumes
we're getting from a server and breaks the appropriate callback in every
matching volume, regardless of cell.  This scan is done for every FID.

Optimise callback breaking by the following means:

 (1) Sort the FID list by vid so that all FIDs belonging to the same volume
     are clumped together.

     This is done through the use of an indirection table as we cannot do
     an insertion sort on the afs_callback_break array as we decode FIDs
     into it as we subsequently also have to decode callback info into it
     that corresponds by array index only.

     We also don't really want to bubblesort afterwards if we can avoid it.

 (2) Sort the server->cb_interests array by vid so that all the matching
     volumes are grouped together.  This permits the scan to stop after
     finding a record that has a higher vid.

 (3) When breaking FIDs, we try to keep server->cb_break_lock as long as
     possible, caching the start point in the array for that volume group
     as long as possible.

     It might make sense to add another layer in that list and have a
     refcounted volume ID anchor that has the matching interests attached
     to it rather than being in the list.  This would allow the lock to be
     dropped without losing the cursor.
Signed-off-by: NDavid Howells <dhowells@redhat.com>

The code that looks up servers by addresses makes the assumption
that the list of addresses for a server is sorted.  It exits the
loop if it finds that the target address is larger than the
current candidate.  As the list is not currently sorted, this
can lead to a failure to find a matching server, which can cause
callbacks from that server to be ignored.

Remove the early exit case so that the complete list is searched.

Fixes: d2ddc776 ("afs: Overhaul volume and server record caching and fileserver rotation")
Signed-off-by: NMarc Dionne <marc.dionne@auristor.com>
Signed-off-by: NDavid Howells <dhowells@redhat.com>

When a server record is destroyed, we want to send a message to the server
telling it that we're giving up all the callbacks it has promised us.

Apply two fixes to this:

 (1) Only send the FS.GiveUpAllCallBacks message if we actually got a
     callback from that server.  We assume this to be the case if we
     performed at least one successful FS operation on that server.

 (2) Send it to the address last used for that server rather than always
     picking the first address in the list (which might be unreachable).

Fixes: d2ddc776 ("afs: Overhaul volume and server record caching and fileserver rotation")
Signed-off-by: NDavid Howells <dhowells@redhat.com>

AFS server records get removed from the net->fs_servers tree when
they're deleted, but not from the net->fs_addresses{4,6} lists, which
can lead to an oops in afs_find_server() when a server record has been
removed, for instance during rmmod.

Fix this by deleting the record from the by-address lists before posting
it for RCU destruction.

The reason this hasn't been noticed before is that the fileserver keeps
probing the local cache manager, thereby keeping the service record
alive, so the oops would only happen when a fileserver eventually gets
bored and stops pinging or if the module gets rmmod'd and a call comes
in from the fileserver during the window between the server records
being destroyed and the socket being closed.

The oops looks something like:

  BUG: unable to handle kernel NULL pointer dereference at 000000000000001c
  ...
  Workqueue: kafsd afs_process_async_call [kafs]
  RIP: 0010:afs_find_server+0x271/0x36f [kafs]
  ...
  Call Trace:
   afs_deliver_cb_init_call_back_state3+0x1f2/0x21f [kafs]
   afs_deliver_to_call+0x1ee/0x5e8 [kafs]
   afs_process_async_call+0x5b/0xd0 [kafs]
   process_one_work+0x2c2/0x504
   worker_thread+0x1d4/0x2ac
   kthread+0x11f/0x127
   ret_from_fork+0x24/0x30

Fixes: d2ddc776 ("afs: Overhaul volume and server record caching and fileserver rotation")
Signed-off-by: NDavid Howells <dhowells@redhat.com>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

Fix warnings raised by checker, including:

 (*) Warnings raised by unequal comparison for the purposes of sorting,
     where the endianness doesn't matter:

fs/afs/addr_list.c:246:21: warning: restricted __be16 degrades to integer
fs/afs/addr_list.c:246:30: warning: restricted __be16 degrades to integer
fs/afs/addr_list.c:248:21: warning: restricted __be32 degrades to integer
fs/afs/addr_list.c:248:49: warning: restricted __be32 degrades to integer
fs/afs/addr_list.c:283:21: warning: restricted __be16 degrades to integer
fs/afs/addr_list.c:283:30: warning: restricted __be16 degrades to integer

 (*) afs_set_cb_interest() is not actually used and can be removed.

 (*) afs_cell_gc_delay() should be provided with a sysctl.

 (*) afs_cell_destroy() needs to use rcu_access_pointer() to read
     cell->vl_addrs.

 (*) afs_init_fs_cursor() should be static.

 (*) struct afs_vnode::permit_cache needs to be marked __rcu.

 (*) afs_server_rcu() needs to use rcu_access_pointer().

 (*) afs_destroy_server() should use rcu_access_pointer() on
     server->addresses as the server object is no longer accessible.

 (*) afs_find_server() casts __be16/__be32 values to int in order to
     directly compare them for the purpose of finding a match in a list,
     but is should also annotate the cast with __force to avoid checker
     warnings.

 (*) afs_check_permit() accesses vnode->permit_cache outside of the RCU
     readlock, though it doesn't then access the value; the extraneous
     access is deleted.

False positives:

 (*) Conditional locking around the code in xdr_decode_AFSFetchStatus.  This
     can be dealt with in a separate patch.

fs/afs/fsclient.c:148:9: warning: context imbalance in 'xdr_decode_AFSFetchStatus' - different lock contexts for basic block

 (*) Incorrect handling of seq-retry lock context balance:

fs/afs/inode.c:455:38: warning: context imbalance in 'afs_getattr' - different
lock contexts for basic block
fs/afs/server.c:52:17: warning: context imbalance in 'afs_find_server' - different lock contexts for basic block
fs/afs/server.c:128:17: warning: context imbalance in 'afs_find_server_by_uuid' - different lock contexts for basic block

Errors:

 (*) afs_lookup_cell_rcu() needs to break out of the seq-retry loop, not go
     round again if it successfully found the workstation cell.

 (*) Fix UUID decode in afs_deliver_cb_probe_uuid().

 (*) afs_cache_permit() has a missing rcu_read_unlock() before one of the
     jumps to the someone_else_changed_it label.  Move the unlock to after
     the label.

 (*) afs_vl_get_addrs_u() is using ntohl() rather than htonl() when
     encoding to XDR.

 (*) afs_deliver_yfsvl_get_endpoints() is using htonl() rather than ntohl()
     when decoding from XDR.
Signed-off-by: NDavid Howells <dhowells@redhat.com>

The old wait_on_atomic_t() is going to get removed, use the more
flexible wait_var_event() API instead.

No change in functionality.
Signed-off-by: NPeter Zijlstra (Intel) <peterz@infradead.org>
Cc: David Howells <dhowells@redhat.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: linux-kernel@vger.kernel.org
Signed-off-by: NIngo Molnar <mingo@kernel.org>

YFS VL servers offer an upgraded Volume Location service that can return
IPv6 addresses to fileservers and volume servers in addition to IPv4
addresses using the YFSVL.GetEndpoints operation which we should use if
it's available.

To this end:

 (1) Make rxrpc_kernel_recv_data() return the call's current service ID so
     that the caller can detect service upgrade and see what the service
     was upgraded to.

 (2) When we see a VL server address we haven't seen before, send a
     VL.GetCapabilities operation to it with the service upgrade bit set.

     If we get an upgrade to the YFS VL service, change the service ID in
     the address list for that address to use the upgraded service and set
     a flag to note that this appears to be a YFS-compatible server.

 (3) If, when a server's addresses are being looked up, we note that we
     previously detected a YFS-compatible server, then send the
     YFSVL.GetEndpoints operation rather than VL.GetAddrsU.

 (4) Build a fileserver address list from the reply of YFSVL.GetEndpoints,
     including both IPv4 and IPv6 addresses.  Volume server addresses are
     discarded.

 (5) The address list is sorted by address and port now, instead of just
     address.  This allows multiple servers on the same host sitting on
     different ports.
Signed-off-by: NDavid Howells <dhowells@redhat.com>

The current code assumes that volumes and servers are per-cell and are
never shared, but this is not enforced, and, indeed, public cells do exist
that are aliases of each other.  Further, an organisation can, say, set up
a public cell and a private cell with overlapping, but not identical, sets
of servers.  The difference is purely in the database attached to the VL
servers.

The current code will malfunction if it sees a server in two cells as it
assumes global address -> server record mappings and that each server is in
just one cell.

Further, each server may have multiple addresses - and may have addresses
of different families (IPv4 and IPv6, say).

To this end, the following structural changes are made:

 (1) Server record management is overhauled:

     (a) Server records are made independent of cell.  The namespace keeps
     	 track of them, volume records have lists of them and each vnode
     	 has a server on which its callback interest currently resides.

     (b) The cell record no longer keeps a list of servers known to be in
     	 that cell.

     (c) The server records are now kept in a flat list because there's no
     	 single address to sort on.

     (d) Server records are now keyed by their UUID within the namespace.

     (e) The addresses for a server are obtained with the VL.GetAddrsU
     	 rather than with VL.GetEntryByName, using the server's UUID as a
     	 parameter.

     (f) Cached server records are garbage collected after a period of
     	 non-use and are counted out of existence before purging is allowed
     	 to complete.  This protects the work functions against rmmod.

     (g) The servers list is now in /proc/fs/afs/servers.

 (2) Volume record management is overhauled:

     (a) An RCU-replaceable server list is introduced.  This tracks both
     	 servers and their coresponding callback interests.

     (b) The superblock is now keyed on cell record and numeric volume ID.

     (c) The volume record is now tied to the superblock which mounts it,
     	 and is activated when mounted and deactivated when unmounted.
     	 This makes it easier to handle the cache cookie without causing a
     	 double-use in fscache.

     (d) The volume record is loaded from the VLDB using VL.GetEntryByNameU
     	 to get the server UUID list.

     (e) The volume name is updated if it is seen to have changed when the
     	 volume is updated (the update is keyed on the volume ID).

 (3) The vlocation record is got rid of and VLDB records are no longer
     cached.  Sufficient information is stored in the volume record, though
     an update to a volume record is now no longer shared between related
     volumes (volumes come in bundles of three: R/W, R/O and backup).

and the following procedural changes are made:

 (1) The fileserver cursor introduced previously is now fleshed out and
     used to iterate over fileservers and their addresses.

 (2) Volume status is checked during iteration, and the server list is
     replaced if a change is detected.

 (3) Server status is checked during iteration, and the address list is
     replaced if a change is detected.

 (4) The abort code is saved into the address list cursor and -ECONNABORTED
     returned in afs_make_call() if a remote abort happened rather than
     translating the abort into an error message.  This allows actions to
     be taken depending on the abort code more easily.

     (a) If a VMOVED abort is seen then this is handled by rechecking the
     	 volume and restarting the iteration.

     (b) If a VBUSY, VRESTARTING or VSALVAGING abort is seen then this is
         handled by sleeping for a short period and retrying and/or trying
         other servers that might serve that volume.  A message is also
         displayed once until the condition has cleared.

     (c) If a VOFFLINE abort is seen, then this is handled as VBUSY for the
     	 moment.

     (d) If a VNOVOL abort is seen, the volume is rechecked in the VLDB to
     	 see if it has been deleted; if not, the fileserver is probably
     	 indicating that the volume couldn't be attached and needs
     	 salvaging.

     (e) If statfs() sees one of these aborts, it does not sleep, but
     	 rather returns an error, so as not to block the umount program.

 (5) The fileserver iteration functions in vnode.c are now merged into
     their callers and more heavily macroised around the cursor.  vnode.c
     is removed.

 (6) Operations on a particular vnode are serialised on that vnode because
     the server will lock that vnode whilst it operates on it, so a second
     op sent will just have to wait.

 (7) Fileservers are probed with FS.GetCapabilities before being used.
     This is where service upgrade will be done.

 (8) A callback interest on a fileserver is set up before an FS operation
     is performed and passed through to afs_make_call() so that it can be
     set on the vnode if the operation returns a callback.  The callback
     interest is passed through to afs_iget() also so that it can be set
     there too.

In general, record updating is done on an as-needed basis when we try to
access servers, volumes or vnodes rather than offloading it to work items
and special threads.

Notes:

 (1) Pre AFS-3.4 servers are no longer supported, though this can be added
     back if necessary (AFS-3.4 was released in 1998).

 (2) VBUSY is retried forever for the moment at intervals of 1s.

 (3) /proc/fs/afs/<cell>/servers no longer exists.
Signed-off-by: NDavid Howells <dhowells@redhat.com>

Add an RCU replaceable address list structure to hold a list of server
addresses.  The list also holds the

To this end:

 (1) A cell's VL server address list can be loaded directly via insmod or
     echo to /proc/fs/afs/cells or dynamically from a DNS query for AFSDB
     or SRV records.

 (2) Anyone wanting to use a cell's VL server address must wait until the
     cell record comes online and has tried to obtain some addresses.

 (3) An FS server's address list, for the moment, has a single entry that
     is the key to the server list.  This will change in the future when a
     server is instead keyed on its UUID and the VL.GetAddrsU operation is
     used.

 (4) An 'address cursor' concept is introduced to handle iteration through
     the address list.  This is passed to the afs_make_call() as, in the
     future, stuff (such as abort code) that doesn't outlast the call will
     be returned in it.

In the future, we might want to annotate the list with information about
how each address fares.  We might then want to propagate such annotations
over address list replacement.

Whilst we're at it, we allow IPv6 addresses to be specified in
colon-delimited lists by enclosing them in square brackets.
Signed-off-by: NDavid Howells <dhowells@redhat.com>

Overhaul the AFS callback handling by the following means:

 (1) Don't give up callback promises on vnodes that we are no longer using,
     rather let them just expire on the server or let the server break
     them.  This is actually more efficient for the server as the callback
     lookup is expensive if there are lots of extant callbacks.

 (2) Only give up the callback promises we have from a server when the
     server record is destroyed.  Then we can just give up *all* the
     callback promises on it in one go.

 (3) Servers can end up being shared between cells if cells are aliased, so
     don't add all the vnodes being backed by a particular server into a
     big FID-indexed tree on that server as there may be duplicates.

     Instead have each volume instance (~= superblock) register an interest
     in a server as it starts to make use of it and use this to allow the
     processor for callbacks from the server to find the superblock and
     thence the inode corresponding to the FID being broken by means of
     ilookup_nowait().

 (4) Rather than iterating over the entire callback list when a mass-break
     comes in from the server, maintain a counter of mass-breaks in
     afs_server (cb_seq) and make afs_validate() check it against the copy
     in afs_vnode.

     It would be nice not to have to take a read_lock whilst doing this,
     but that's tricky without using RCU.

 (5) Save a ref on the fileserver we're using for a call in the afs_call
     struct so that we can access its cb_s_break during call decoding.

 (6) Write-lock around callback and status storage in a vnode and read-lock
     around getattr so that we don't see the status mid-update.

This has the following consequences:

 (1) Data invalidation isn't seen until someone calls afs_validate() on a
     vnode.  Unfortunately, we need to use a key to query the server, but
     getting one from a background thread is tricky without caching loads
     of keys all over the place.

 (2) Mass invalidation isn't seen until someone calls afs_validate().

 (3) Callback breaking is going to hit the inode_hash_lock quite a bit.
     Could this be replaced with rcu_read_lock() since inodes are destroyed
     under RCU conditions.
Signed-off-by: NDavid Howells <dhowells@redhat.com>

Allow VL server specifications to be given IPv6 addresses as well as IPv4
addresses, for example as:

	echo add foo.org 1111:2222:3333:0:4444:5555:6666:7777 >/proc/fs/afs/cells

Note that ':' is the expected separator for separating IPv4 addresses, but
if a ',' is detected or no '.' is detected in the string, the delimiter is
switched to ','.

This also works with DNS AFSDB or SRV record strings fetched by upcall from
userspace.
Signed-off-by: NDavid Howells <dhowells@redhat.com>

Keep and pass sockaddr_rxrpc addresses around rather than keeping and
passing in_addr addresses to allow for the use of IPv6 and non-standard
port numbers in future.

This also allows the port and service_id fields to be removed from the
afs_call struct.
Signed-off-by: NDavid Howells <dhowells@redhat.com>