- 28 7月, 2010 22 次提交
-
-
由 Jing Huang 提交于
This patch fixes 3 bugs in vport create/delete. 1) Replace scsi_add_host() with scsi_add_host_with_dma() 2) Fix rmmod hang when there are vports configured. This is due to a race condition between the workqueue destroy in pci remove context and the vport delete works being handled. The fix is to use a counter to track the vport delete work, so that workqueue destroy will not be called until all configured vports are deleted from workqueue. 3) Fix rmmmod crash when there are PBC vport configured. PBC is not allowed to be deleted dynamically. However, if someone try to delete it, it leaves the vport is wrong state. The fix is to restore the vport back to original state when the attempt to delete pbc vport delete is failed. Signed-off-by: NJing Huang <huangj@brocade.com> Signed-off-by: NJames Bottomley <James.Bottomley@suse.de>
-
由 Jing Huang 提交于
This patch fixes the issue of passing wrong argument to callback function. Signed-off-by: NJing Huang <huangj@brocade.com> Signed-off-by: NJames Bottomley <James.Bottomley@suse.de>
-
由 Jing Huang 提交于
This patch adds ioc state checking while enabling a port. Signed-off-by: NJing Huang <huangj@brocade.com> Signed-off-by: NJames Bottomley <James.Bottomley@suse.de>
-
由 Jing Huang 提交于
Add description for bfa driver module parameters. Signed-off-by: NJing Huang <huangj@brocade.com> Signed-off-by: NJames Bottomley <James.Bottomley@suse.de>
-
由 Jing Huang 提交于
Update bfa driver API and data structure to support BOFM (IBM BladeCenter Open Fabric Manager). Signed-off-by: NJing Huang <huangj@brocade.com> Signed-off-by: NJames Bottomley <James.Bottomley@suse.de>
-
由 Jing Huang 提交于
While processing the ioim in callback functions, the ioim is still in io_q. During this time, if the itnim goes offline, the ioim is requeued from itnim->io_q into itnim->delay_comp_q although the request is already completed. This results in requeing the ioim into the callback queue if the ioim is not freed by the time the ioim is requeued. This results in double completion of the ioim. To fix this, whenever a response is received from firmware for an ioim, deque it from io_q and enque to fcpim->comp_q. This will eliminate any possibility of itnim picking any ioim for which the response is already received. Signed-off-by: NJing Huang <huangj@brocade.com> Signed-off-by: NJames Bottomley <James.Bottomley@suse.de>
-
由 Jing Huang 提交于
When the FCoE Linkup event is sent to the host, the link_state (struct bfa_pport_link_s) structure is copied to the RME buf to be sent to the host. But the size of this structure(164 bytes) is larger than the reserved RME buffer size(128 byes). The following changes reduce the size of the structure to be less than RME buffer size(128 bytes): - Remove the trunk and loop info from link_state structure, because both trunk and loop are not supported. - Combine qos_vc_attr and fcf into an union. Signed-off-by: NJing Huang <huangj@brocade.com> Signed-off-by: NJames Bottomley <James.Bottomley@suse.de>
-
由 Jing Huang 提交于
Add new bfa functionality to support dynamic queue selection (IO redirection). IO redirection can only be enabled when QoS is disabled. Signed-off-by: NJing Huang <huangj@brocade.com> Signed-off-by: NJames Bottomley <James.Bottomley@suse.de>
-
由 Jing Huang 提交于
BFA UF module did not hold lock when seding uf post buffer message to firmware causing CPE-Q corruption. Fix is to check present of FCS and if FCS present hold lock while posting UF buffers. Handle PRLO with sending acc to it and relogin with rport. Discard fcxp before any state change. Signed-off-by: NJing Huang <huangj@brocade.com> Signed-off-by: NJames Bottomley <James.Bottomley@suse.de>
-
由 Jing Huang 提交于
Clear PSS memory reset that is set as part of power-on-reset (pci reset). Complete PMM memory reset before BISTR start. Clear EDRAM BISTR start bit after fixed delay. BISTR DONE bit status is not getting set. Use a fixed 1ms delay for BISTR now. Expose PMM IT memory definitions to host. Signed-off-by: NJing Huang <huangj@brocade.com> Signed-off-by: NJames Bottomley <James.Bottomley@suse.de>
-
由 Jing Huang 提交于
Update related data structures to support firmeare configuration. Add AEN events related to firmware configuation. Signed-off-by: NJing Huang <huangj@brocade.com> Signed-off-by: NJames Bottomley <James.Bottomley@suse.de>
-
由 Jing Huang 提交于
Add PBC port disable handling in BFA and return the appropriate status from BFA APIs. In bfa_fcs_lport.c, handle OFFLINE event to avoid BFA_ASSERT. Signed-off-by: NJing Huang <huangj@brocade.com> Signed-off-by: NJames Bottomley <James.Bottomley@suse.de>
-
由 Jing Huang 提交于
Add a max retry limit for PRLI retries. Max retry limit (5) is same as used in rport PLOGI. Once the retries are exhausted, invoke rport offline so that existing logic of rport re-discovery can kick-in. Also fixed a bug in rport.c where one less retry was happening. Signed-off-by: NJing Huang <huangj@brocade.com> Signed-off-by: NJames Bottomley <James.Bottomley@suse.de>
-
由 Jing Huang 提交于
When a rport goes offline, its speed setting was not reset. Subsequently, if the rport was not deleted due to it coming back online within rport del timeout, previously discovered speed would continue to show up. The fix is to reset the speed when processing rport offline transition. In rport attributes, rport's with unknown speed were indicated as TRL enforced. The right thing do to would be to use TRL default speed to determine if TRL is enforced, when TRL is enabled. Signed-off-by: NJing Huang <huangj@brocade.com> Signed-off-by: NJames Bottomley <James.Bottomley@suse.de>
-
由 Jing Huang 提交于
Do not update the coalesce flag of the intr_attr struct in driver config area on config response. This is to prevent the coalesce flag being reported as on after an ioc disable/enable even if it was set to off before disable. Signed-off-by: NJing Huang <huangj@brocade.com> Signed-off-by: NJames Bottomley <James.Bottomley@suse.de>
-
由 Jing Huang 提交于
Use standards defined 2 * RA_TOV as a timeout for ELS Request retries. And standards defined 3 * RA_TOV as a timeout for FC-CT Request retries. Also, added a check to send RPSC2 to a Brocade Fabric only. Signed-off-by: NJing Huang <huangj@brocade.com> Signed-off-by: NJames Bottomley <James.Bottomley@suse.de>
-
由 Jing Huang 提交于
- Added time stamp for fcport stats reset - Added new fileds to the statistics data structures. - Typo removal and minor cleanup. Signed-off-by: NJing Huang <huangj@brocade.com> Signed-off-by: NJames Bottomley <James.Bottomley@suse.de>
-
由 Jing Huang 提交于
This patch fixes the APIs to obtain ioc attributes - fix API to obtain wwpn, wwnn, and mac. - add API to get mfg wwpn, wwnn, and mac. - fix API to obtain wwn of boot target. Signed-off-by: NJing Huang <huangj@brocade.com> Signed-off-by: NJames Bottomley <James.Bottomley@suse.de>
-
由 Jing Huang 提交于
Vport state machine does not cleanup associated lport in some states: while waiting for fdisc response or fdisc failure state. The fixe is to cleanup lport on vport delete in all states. In fdisc state, discard fdisc response and delete lport and wait for lport deletecompletion. in error state, delete lport and wait for delete completion. Signed-off-by: NJing Huang <huangj@brocade.com> Signed-off-by: NJames Bottomley <James.Bottomley@suse.de>
-
由 Jing Huang 提交于
This patch enables creating PBC vport. During fcs init, fcs will read PBC vport using bfa iocfc API and invoke fcb callback to add the pbc vport entries into a list. The pbc vport list will be traversed in the subsequent pci probe process and vport will be created using fc transport provided vport create function. Signed-off-by: NJing Huang <huangj@brocade.com> Signed-off-by: NJames Bottomley <James.Bottomley@suse.de>
-
由 Jing Huang 提交于
The patch includes the driver side changes to enable basic PBC (PreBoot Configuration) feature. - Data structure changes and new definitions for PBC. - APIs to access PBC info. - Remove unused code. Signed-off-by: NJing Huang <huangj@brocade.com> Signed-off-by: NJames Bottomley <James.Bottomley@suse.de>
-
由 Jing Huang 提交于
This patch enables support of new mezzanine cards for HP and IBM blade server. - Add new pciids for HP and IBM mezzanine card. - Add a new firmware image for HP mezzanine card, which is running in FC only mode. Rename firmware image to reflect the difference. Change the firmware download code accordingly for the above changes. Signed-off-by: NJing Huang <huangj@brocade.com> Signed-off-by: NJames Bottomley <James.Bottomley@suse.de>
-
- 25 5月, 2010 1 次提交
-
-
由 Krishna Gudipati 提交于
The port data structure related to fc_host statistics collection is not initialized. This causes system crash when reading the fc_host statistics. The fix is to initialize port structure during driver attach. Signed-off-by: NKrishna Gudipati <kgudipat@brocade.com> Signed-off-by: NJames Bottomley <James.Bottomley@suse.de>
-
- 02 5月, 2010 1 次提交
-
-
由 Jing Huang 提交于
Fix the compilation warning in powerpc. The same change also fixes endian issue we found in powerpc test. This patch has been tested in x86 and powerpc platform. it is created using scsi-misc-2.6. Signed-off-by: NJing Huang <huangj@brocade.com> Signed-off-by: NJames Bottomley <James.Bottomley@suse.de>
-
- 11 4月, 2010 6 次提交
-
-
由 Jing Huang 提交于
sg address in IO request is not set up correctly for big endian platform. add new macros to properly swap the address. Signed-off-by: NJing Huang <huangj@brocade.com> Signed-off-by: NJames Bottomley <James.Bottomley@suse.de>
-
由 Jing Huang 提交于
idr is a global resource, protect it with global bfad_mutex. Signed-off-by: NJing Huang <huangj@brocade.com> Signed-off-by: NJames Bottomley <James.Bottomley@suse.de>
-
由 Jing Huang 提交于
Use pci_iomap() and pci_iounmap() to simplify the code. Remove uncessary #ifdef check for ia64 (it was added as a workaound for some RHEL 5.x release which doesn't export iounmap function) Signed-off-by: NJing Huang <huangj@brocade.com> Signed-off-by: NJames Bottomley <James.Bottomley@suse.de>
-
由 Jing Huang 提交于
Currently the driver doesn't take into consideraion of possible sg chaining when it walks through the sg list. This is fixed by using the sg_next() which automatically handles the chaining case. Obosolete code is removed as a result of this change. Signed-off-by: NJing Huang <huangj@brocade.com> Signed-off-by: NJames Bottomley <James.Bottomley@suse.de>
-
由 Jing Huang 提交于
Use duplicate fc transport template for physical and vitual port. Add vport create/delete/disalbe functions in the transport template of physical port. Changes to make the vport create/delete function to work under this framework. Signed-off-by: NJing Huang <huangj@brocade.com> Signed-off-by: NJames Bottomley <James.Bottomley@suse.de>
-
由 Julia Lawall 提交于
The variable bfa_itnim is initialized twice to the same (side effect-free) expression. Drop one initialization. A simplified version of the semantic match that finds this problem is: (http://coccinelle.lip6.fr/) // <smpl> @forall@ idexpression *x; identifier f!=ERR_PTR; @@ x = f(...) ... when != x ( x = f(...,<+...x...+>,...) | * x = f(...) ) // </smpl> Signed-off-by: NJulia Lawall <julia@diku.dk> Acked-by: NJing Huang <huangj@brocade.com> Signed-off-by: NAndrew Morton <akpm@linux-foundation.org> Signed-off-by: NJames Bottomley <James.Bottomley@suse.de>
-
- 30 3月, 2010 1 次提交
-
-
由 Tejun Heo 提交于
include cleanup: Update gfp.h and slab.h includes to prepare for breaking implicit slab.h inclusion from percpu.h percpu.h is included by sched.h and module.h and thus ends up being included when building most .c files. percpu.h includes slab.h which in turn includes gfp.h making everything defined by the two files universally available and complicating inclusion dependencies. percpu.h -> slab.h dependency is about to be removed. Prepare for this change by updating users of gfp and slab facilities include those headers directly instead of assuming availability. As this conversion needs to touch large number of source files, the following script is used as the basis of conversion. http://userweb.kernel.org/~tj/misc/slabh-sweep.py The script does the followings. * Scan files for gfp and slab usages and update includes such that only the necessary includes are there. ie. if only gfp is used, gfp.h, if slab is used, slab.h. * When the script inserts a new include, it looks at the include blocks and try to put the new include such that its order conforms to its surrounding. It's put in the include block which contains core kernel includes, in the same order that the rest are ordered - alphabetical, Christmas tree, rev-Xmas-tree or at the end if there doesn't seem to be any matching order. * If the script can't find a place to put a new include (mostly because the file doesn't have fitting include block), it prints out an error message indicating which .h file needs to be added to the file. The conversion was done in the following steps. 1. The initial automatic conversion of all .c files updated slightly over 4000 files, deleting around 700 includes and adding ~480 gfp.h and ~3000 slab.h inclusions. The script emitted errors for ~400 files. 2. Each error was manually checked. Some didn't need the inclusion, some needed manual addition while adding it to implementation .h or embedding .c file was more appropriate for others. This step added inclusions to around 150 files. 3. The script was run again and the output was compared to the edits from #2 to make sure no file was left behind. 4. Several build tests were done and a couple of problems were fixed. e.g. lib/decompress_*.c used malloc/free() wrappers around slab APIs requiring slab.h to be added manually. 5. The script was run on all .h files but without automatically editing them as sprinkling gfp.h and slab.h inclusions around .h files could easily lead to inclusion dependency hell. Most gfp.h inclusion directives were ignored as stuff from gfp.h was usually wildly available and often used in preprocessor macros. Each slab.h inclusion directive was examined and added manually as necessary. 6. percpu.h was updated not to include slab.h. 7. Build test were done on the following configurations and failures were fixed. CONFIG_GCOV_KERNEL was turned off for all tests (as my distributed build env didn't work with gcov compiles) and a few more options had to be turned off depending on archs to make things build (like ipr on powerpc/64 which failed due to missing writeq). * x86 and x86_64 UP and SMP allmodconfig and a custom test config. * powerpc and powerpc64 SMP allmodconfig * sparc and sparc64 SMP allmodconfig * ia64 SMP allmodconfig * s390 SMP allmodconfig * alpha SMP allmodconfig * um on x86_64 SMP allmodconfig 8. percpu.h modifications were reverted so that it could be applied as a separate patch and serve as bisection point. Given the fact that I had only a couple of failures from tests on step 6, I'm fairly confident about the coverage of this conversion patch. If there is a breakage, it's likely to be something in one of the arch headers which should be easily discoverable easily on most builds of the specific arch. Signed-off-by: NTejun Heo <tj@kernel.org> Guess-its-ok-by: NChristoph Lameter <cl@linux-foundation.org> Cc: Ingo Molnar <mingo@redhat.com> Cc: Lee Schermerhorn <Lee.Schermerhorn@hp.com>
-
- 16 3月, 2010 1 次提交
-
-
由 Thomas Weber 提交于
[Ss]ytem => [Ss]ystem udpate => update paramters => parameters orginal => original Signed-off-by: NThomas Weber <swirl@gmx.li> Acked-by: NRandy Dunlap <rdunlap@xenotime.net> Signed-off-by: NJiri Kosina <jkosina@suse.cz>
-
- 07 3月, 2010 8 次提交
-
-
由 Krishna Gudipati 提交于
Upgrade the upstream driver from 2.0.0.0 to 2.1.2.1. Signed-off-by: NKrishna Gudipati <kgudipat@brocade.com> Signed-off-by: NJames Bottomley <James.Bottomley@suse.de>
-
由 Krishna Gudipati 提交于
Signed-off-by: NKrishna Gudipati <kgudipat@brocade.com> Signed-off-by: NJames Bottomley <James.Bottomley@suse.de>
-
由 Krishna Gudipati 提交于
When IO is completed with underrun and with good SCSI status, check if the transferred bytes against scsi_cmnd->underflow, which is set to minimum number of bytes that must be transferred for this command, if is less than required minimum, complete the IO with DID_ERROR. Signed-off-by: NKrishna Gudipati <kgudipat@brocade.com> Signed-off-by: NJames Bottomley <James.Bottomley@suse.de>
-
由 Krishna Gudipati 提交于
MS module did not invoke fdmi offline in all cases, call fdmi offline when ms module receives a port offline, so that fdmi offline is from one place in the ms module. Make changes to handle 10G speed in the conversion routine. Replaced the usage of bfa_adapter_attr_s struct with specific API's. Signed-off-by: NKrishna Gudipati <kgudipat@brocade.com> Signed-off-by: NJames Bottomley <James.Bottomley@suse.de>
-
由 Krishna Gudipati 提交于
Modified the portstats get/clear logic for port physical/FCoE/QoS stats. Added more stats to FC Fixed some issues with FCoE stats collection. Signed-off-by: NKrishna Gudipati <kgudipat@brocade.com> Signed-off-by: NJames Bottomley <James.Bottomley@suse.de>
-
由 Krishna Gudipati 提交于
bfa_ioc_attr_s is a big structure and some times could cause stack overflow if defined locally, so add specific APIs that are needed to replace the use of ioc_attr local var. Signed-off-by: NKrishna Gudipati <kgudipat@brocade.com> Signed-off-by: NJames Bottomley <James.Bottomley@suse.de>
-
由 Krishna Gudipati 提交于
Signed-off-by: NKrishna Gudipati <kgudipat@brocade.com> Signed-off-by: NJames Bottomley <James.Bottomley@suse.de>
-
由 Krishna Gudipati 提交于
Rename pport structures to fcport in BFA FCS, to resolve confusion about the port structures in the firmware, and make sure the SG page is setup correctly. Signed-off-by: NKrishna Gudipati <kgudipat@brocade.com> Signed-off-by: NJames Bottomley <James.Bottomley@suse.de>
-