Skip to content

K
Kernel

openeuler / Kernel
1 年多 前同步成功

通知 8
Star 0
Fork 0
K
Kernel
切换分支/标签
  1. 22 7月, 2018 6 次提交
  3. 16 7月, 2018 3 次提交
    • A
      efi: Drop type and attribute checks in efi_mem_desc_lookup() · 7e1550b8
      由 Ard Biesheuvel 提交于 
      The current implementation of efi_mem_desc_lookup() includes the
following check on the memory descriptor it returns:

    if (!(md->attribute & EFI_MEMORY_RUNTIME) &&
        md->type != EFI_BOOT_SERVICES_DATA &&
        md->type != EFI_RUNTIME_SERVICES_DATA) {
            continue;
    }

This means that only EfiBootServicesData or EfiRuntimeServicesData
regions are considered, or any other region type provided that it
has the EFI_MEMORY_RUNTIME attribute set.

Given what the name of the function implies, and the fact that any
physical address can be described in the UEFI memory map only a single
time, it does not make sense to impose this condition in the body of the
loop, but instead, should be imposed by the caller depending on the value
that is returned to it.

Two such callers exist at the moment:

- The BGRT code when running on x86, via efi_mem_reserve() and
  efi_arch_mem_reserve(). In this case, the region is already known to
  be EfiBootServicesData, and so the check is redundant.

- The ESRT handling code which introduced this function, which calls it
  both directly from efi_esrt_init() and again via efi_mem_reserve() and
  efi_arch_mem_reserve() [on x86].

So let's move this check into the callers instead. This preserves the
current behavior both for BGRT and ESRT handling, and allows the lookup
routine to be reused by other [upcoming] users that don't have this
limitation.

In the ESRT case, keep the entire condition, so that platforms that
deviate from the UEFI spec and use something other than
EfiBootServicesData for the ESRT table will keep working as before.

For x86's efi_arch_mem_reserve() implementation, limit the type to
EfiBootServicesData, since it is the only type the reservation code
expects to operate on in the first place.

While we're at it, drop the __init annotation so that drivers can use it
as well.
Tested-by: NLaszlo Ersek <lersek@redhat.com>
Signed-off-by: NArd Biesheuvel <ard.biesheuvel@linaro.org>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Peter Jones <pjones@redhat.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: linux-efi@vger.kernel.org
Link: http://lkml.kernel.org/r/20180711094040.12506-8-ard.biesheuvel@linaro.orgSigned-off-by: NIngo Molnar <mingo@kernel.org>
      7e1550b8
    • S
      efi/x86: Use non-blocking SetVariable() for efi_delete_dummy_variable() · 5a58bc1b
      由 Sai Praneeth 提交于 
      Presently, efi_delete_dummy_variable() uses set_variable() which might
block, which the scheduler is rightfully upset about when used from
the idle thread, producing this splat:

  "bad: scheduling from the idle thread!"

So, make efi_delete_dummy_variable() use set_variable_nonblocking(),
which, as the name suggests, doesn't block.
Signed-off-by: NSai Praneeth Prakhya <sai.praneeth.prakhya@intel.com>
Signed-off-by: NArd Biesheuvel <ard.biesheuvel@linaro.org>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: linux-efi@vger.kernel.org
Link: http://lkml.kernel.org/r/20180711094040.12506-3-ard.biesheuvel@linaro.orgSigned-off-by: NIngo Molnar <mingo@kernel.org>
      5a58bc1b
    • I
      efi/x86: Clean up the eboot code · 90a2186b
      由 Ingo Molnar 提交于 
      Various small cleanups:

 - Standardize printk messages:

     'alloc' => 'allocate'
     'mem'   => 'memory'

   also put variable names in printk messages between quotes.

 - Align mass-assignments vertically for better readability

 - Break multi-line function prototypes at the name where possible,
   not in the middle of the parameter list

 - Use a newline before return statements consistently.

 - Use curly braces in a balanced fashion.

 - Remove stray newlines.

No change in functionality.
Signed-off-by: NIngo Molnar <mingo@kernel.org>
Signed-off-by: NArd Biesheuvel <ard.biesheuvel@linaro.org>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Matt Fleming <matt@codeblueprint.co.uk>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: linux-efi@vger.kernel.org
Link: http://lkml.kernel.org/r/20180711094040.12506-2-ard.biesheuvel@linaro.orgSigned-off-by: NIngo Molnar <mingo@kernel.org>
      90a2186b
  5. 15 7月, 2018 1 次提交
  7. 13 7月, 2018 1 次提交
  9. 12 7月, 2018 1 次提交
  11. 11 7月, 2018 1 次提交
    • A
      efi/x86: Fix mixed mode reboot loop by removing pointless call to PciIo->Attributes() · e2967018
      由 Ard Biesheuvel 提交于 
      Hans de Goede reported that his mixed EFI mode Bay Trail tablet
would not boot at all any more, but enter a reboot loop without
any logs printed by the kernel.

Unbreak 64-bit Linux/x86 on 32-bit UEFI:

When it was first introduced, the EFI stub code that copies the
contents of PCI option ROMs originally only intended to do so if
the EFI_PCI_IO_ATTRIBUTE_EMBEDDED_ROM attribute was *not* set.

The reason was that the UEFI spec permits PCI option ROM images
to be provided by the platform directly, rather than via the ROM
BAR, and in this case, the OS can only access them at runtime if
they are preserved at boot time by copying them from the areas
described by PciIo->RomImage and PciIo->RomSize.

However, it implemented this check erroneously, as can be seen in
commit:

  dd5fc854 ("EFI: Stash ROMs if they're not in the PCI BAR")

which introduced:

    if (!attributes & EFI_PCI_IO_ATTRIBUTE_EMBEDDED_ROM)
            continue;

and given that the numeric value of EFI_PCI_IO_ATTRIBUTE_EMBEDDED_ROM
is 0x4000, this condition never becomes true, and so the option ROMs
were copied unconditionally.

This was spotted and 'fixed' by commit:

  886d751a ("x86, efi: correct precedence of operators in setup_efi_pci")

but inadvertently inverted the logic at the same time, defeating
the purpose of the code, since it now only preserves option ROM
images that can be read from the ROM BAR as well.

Unsurprisingly, this broke some systems, and so the check was removed
entirely in the following commit:

  73970188 ("x86, efi: remove attribute check from setup_efi_pci")

It is debatable whether this check should have been included in the
first place, since the option ROM image provided to the UEFI driver by
the firmware may be different from the one that is actually present in
the card's flash ROM, and so whatever PciIo->RomImage points at should
be preferred regardless of whether the attribute is set.

As this was the only use of the attributes field, we can remove
the call to PciIo->Attributes() entirely, which is especially
nice because its prototype involves uint64_t type by-value
arguments which the EFI mixed mode has trouble dealing with.

Any mixed mode system with PCI is likely to be affected.
Tested-by: NWilfried Klaebe <linux-kernel@lebenslange-mailadresse.de>
Tested-by: NHans de Goede <hdegoede@redhat.com>
Signed-off-by: NArd Biesheuvel <ard.biesheuvel@linaro.org>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Matt Fleming <matt@codeblueprint.co.uk>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: linux-efi@vger.kernel.org
Link: http://lkml.kernel.org/r/20180711090235.9327-2-ard.biesheuvel@linaro.orgSigned-off-by: NIngo Molnar <mingo@kernel.org>
      e2967018
  13. 08 7月, 2018 1 次提交
  15. 06 7月, 2018 1 次提交
  17. 03 7月, 2018 5 次提交
  19. 01 7月, 2018 1 次提交
  21. 29 6月, 2018 1 次提交
    • N
      x86/e820: put !E820_TYPE_RAM regions into memblock.reserved · 124049de
      由 Naoya Horiguchi 提交于 
      There is a kernel panic that is triggered when reading /proc/kpageflags
on the kernel booted with kernel parameter 'memmap=nn[KMG]!ss[KMG]':

  BUG: unable to handle kernel paging request at fffffffffffffffe
  PGD 9b20e067 P4D 9b20e067 PUD 9b210067 PMD 0
  Oops: 0000 [#1] SMP PTI
  CPU: 2 PID: 1728 Comm: page-types Not tainted 4.17.0-rc6-mm1-v4.17-rc6-180605-0816-00236-g2dfb086ef02c+ #160
  Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.11.0-2.fc28 04/01/2014
  RIP: 0010:stable_page_flags+0x27/0x3c0
  Code: 00 00 00 0f 1f 44 00 00 48 85 ff 0f 84 a0 03 00 00 41 54 55 49 89 fc 53 48 8b 57 08 48 8b 2f 48 8d 42 ff 83 e2 01 48 0f 44 c7 <48> 8b 00 f6 c4 01 0f 84 10 03 00 00 31 db 49 8b 54 24 08 4c 89 e7
  RSP: 0018:ffffbbd44111fde0 EFLAGS: 00010202
  RAX: fffffffffffffffe RBX: 00007fffffffeff9 RCX: 0000000000000000
  RDX: 0000000000000001 RSI: 0000000000000202 RDI: ffffed1182fff5c0
  RBP: ffffffffffffffff R08: 0000000000000001 R09: 0000000000000001
  R10: ffffbbd44111fed8 R11: 0000000000000000 R12: ffffed1182fff5c0
  R13: 00000000000bffd7 R14: 0000000002fff5c0 R15: ffffbbd44111ff10
  FS:  00007efc4335a500(0000) GS:ffff93a5bfc00000(0000) knlGS:0000000000000000
  CS:  0010 DS: 0000 ES: 0000 CR0: 0000000080050033
  CR2: fffffffffffffffe CR3: 00000000b2a58000 CR4: 00000000001406e0
  Call Trace:
   kpageflags_read+0xc7/0x120
   proc_reg_read+0x3c/0x60
   __vfs_read+0x36/0x170
   vfs_read+0x89/0x130
   ksys_pread64+0x71/0x90
   do_syscall_64+0x5b/0x160
   entry_SYSCALL_64_after_hwframe+0x44/0xa9
  RIP: 0033:0x7efc42e75e23
  Code: 09 00 ba 9f 01 00 00 e8 ab 81 f4 ff 66 2e 0f 1f 84 00 00 00 00 00 90 83 3d 29 0a 2d 00 00 75 13 49 89 ca b8 11 00 00 00 0f 05 <48> 3d 01 f0 ff ff 73 34 c3 48 83 ec 08 e8 db d3 01 00 48 89 04 24

According to kernel bisection, this problem became visible due to commit
f7f99100 ("mm: stop zeroing memory during allocation in vmemmap")
which changes how struct pages are initialized.

Memblock layout affects the pfn ranges covered by node/zone.  Consider
that we have a VM with 2 NUMA nodes and each node has 4GB memory, and
the default (no memmap= given) memblock layout is like below:

  MEMBLOCK configuration:
   memory size = 0x00000001fff75c00 reserved size = 0x000000000300c000
   memory.cnt  = 0x4
   memory[0x0]     [0x0000000000001000-0x000000000009efff], 0x000000000009e000 bytes on node 0 flags: 0x0
   memory[0x1]     [0x0000000000100000-0x00000000bffd6fff], 0x00000000bfed7000 bytes on node 0 flags: 0x0
   memory[0x2]     [0x0000000100000000-0x000000013fffffff], 0x0000000040000000 bytes on node 0 flags: 0x0
   memory[0x3]     [0x0000000140000000-0x000000023fffffff], 0x0000000100000000 bytes on node 1 flags: 0x0
   ...

If you give memmap=1G!4G (so it just covers memory[0x2]),
the range [0x100000000-0x13fffffff] is gone:

  MEMBLOCK configuration:
   memory size = 0x00000001bff75c00 reserved size = 0x000000000300c000
   memory.cnt  = 0x3
   memory[0x0]     [0x0000000000001000-0x000000000009efff], 0x000000000009e000 bytes on node 0 flags: 0x0
   memory[0x1]     [0x0000000000100000-0x00000000bffd6fff], 0x00000000bfed7000 bytes on node 0 flags: 0x0
   memory[0x2]     [0x0000000140000000-0x000000023fffffff], 0x0000000100000000 bytes on node 1 flags: 0x0
   ...

This causes shrinking node 0's pfn range because it is calculated by the
address range of memblock.memory.  So some of struct pages in the gap
range are left uninitialized.

We have a function zero_resv_unavail() which does zeroing the struct pages
within the reserved unavailable range (i.e.  memblock.memory &&
!memblock.reserved).  This patch utilizes it to cover all unavailable
ranges by putting them into memblock.reserved.

Link: http://lkml.kernel.org/r/20180615072947.GB23273@hori1.linux.bs1.fc.nec.co.jp
Fixes: f7f99100 ("mm: stop zeroing memory during allocation in vmemmap")
Signed-off-by: NNaoya Horiguchi <n-horiguchi@ah.jp.nec.com>
Tested-by: NOscar Salvador <osalvador@suse.de>
Tested-by: N"Herton R. Krzesinski" <herton@redhat.com>
Acked-by: NMichal Hocko <mhocko@suse.com>
Reviewed-by: NPavel Tatashin <pasha.tatashin@oracle.com>
Cc: Steven Sistare <steven.sistare@oracle.com>
Cc: Daniel Jordan <daniel.m.jordan@oracle.com>
Cc: Matthew Wilcox <willy@infradead.org>
Cc: <stable@vger.kernel.org>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
      124049de
  23. 27 6月, 2018 4 次提交
  25. 26 6月, 2018 3 次提交
  27. 24 6月, 2018 1 次提交
    • A
      efi/x86: Fix incorrect invocation of PciIo->Attributes() · 2e6eb40c
      由 Ard Biesheuvel 提交于 
      The following commit:

  2c3625cb ("efi/x86: Fold __setup_efi_pci32() and __setup_efi_pci64() into one function")

... merged the two versions of __setup_efi_pciXX(), without taking into
account that the 32-bit version used a rather dodgy trick to pass an
immediate 0 constant as argument for a uint64_t parameter.

The issue is caused by the fact that on x86, UEFI protocol method calls
are redirected via struct efi_config::call(), which is a variadic function,
and so the compiler has to infer the types of the parameters from the
arguments rather than from the prototype.

As the 32-bit x86 calling convention passes arguments via the stack,
passing the unqualified constant 0 twice is the same as passing 0ULL,
which is why the 32-bit code in __setup_efi_pci32() contained the
following call:

  status = efi_early->call(pci->attributes, pci,
                           EfiPciIoAttributeOperationGet, 0, 0,
                           &attributes);

to invoke this UEFI protocol method:

  typedef
  EFI_STATUS
  (EFIAPI *EFI_PCI_IO_PROTOCOL_ATTRIBUTES) (
    IN  EFI_PCI_IO_PROTOCOL                     *This,
    IN  EFI_PCI_IO_PROTOCOL_ATTRIBUTE_OPERATION Operation,
    IN  UINT64                                  Attributes,
    OUT UINT64                                  *Result OPTIONAL
    );

After the merge, we inadvertently ended up with this version for both
32-bit and 64-bit builds, breaking the latter.

So replace the two zeroes with the explicitly typed constant 0ULL,
which works as expected on both 32-bit and 64-bit builds.

Wilfried tested the 64-bit build, and I checked the generated assembly
of a 32-bit build with and without this patch, and they are identical.
Reported-by: NWilfried Klaebe <linux-kernel@lebenslange-mailadresse.de>
Tested-by: NWilfried Klaebe <linux-kernel@lebenslange-mailadresse.de>
Signed-off-by: NArd Biesheuvel <ard.biesheuvel@linaro.org>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Matt Fleming <matt@codeblueprint.co.uk>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: hdegoede@redhat.com
Cc: linux-efi@vger.kernel.org
Signed-off-by: NIngo Molnar <mingo@kernel.org>
      2e6eb40c
  29. 23 6月, 2018 4 次提交
  31. 22 6月, 2018 4 次提交
    • M
      kvm: vmx: Nested VM-entry prereqs for event inj. · 0447378a
      由 Marc Orr 提交于 
      This patch extends the checks done prior to a nested VM entry.
Specifically, it extends the check_vmentry_prereqs function with checks
for fields relevant to the VM-entry event injection information, as
described in the Intel SDM, volume 3.

This patch is motivated by a syzkaller bug, where a bad VM-entry
interruption information field is generated in the VMCS02, which causes
the nested VM launch to fail. Then, KVM fails to resume L1.

While KVM should be improved to correctly resume L1 execution after a
failed nested launch, this change is justified because the existing code
to resume L1 is flaky/ad-hoc and the test coverage for resuming L1 is
sparse.
Reported-by: Nsyzbot <syzkaller@googlegroups.com>
Signed-off-by: NMarc Orr <marcorr@google.com>
[Removed comment whose parts were describing previous revisions and the
 rest was obvious from function/variable naming. - Radim]
Signed-off-by: NRadim Krčmář <rkrcmar@redhat.com>
      0447378a
    • Z
      x86/microcode/intel: Fix memleak in save_microcode_patch() · 0218c766
      由 Zhenzhong Duan 提交于 
      Free useless ucode_patch entry when it's replaced.

[ bp: Drop the memfree_patch() two-liner. ]
Signed-off-by: NZhenzhong Duan <zhenzhong.duan@oracle.com>
Signed-off-by: NBorislav Petkov <bp@suse.de>
Signed-off-by: NThomas Gleixner <tglx@linutronix.de>
Cc: Srinivas REDDY Eeda <srinivas.eeda@oracle.com>
Link: http://lkml.kernel.org/r/888102f0-fd22-459d-b090-a1bd8a00cb2b@default
      0218c766
    • T
      x86/mce: Fix incorrect "Machine check from unknown source" message · 40c36e27
      由 Tony Luck 提交于 
      Some injection testing resulted in the following console log:

  mce: [Hardware Error]: CPU 22: Machine Check Exception: f Bank 1: bd80000000100134
  mce: [Hardware Error]: RIP 10:<ffffffffc05292dd> {pmem_do_bvec+0x11d/0x330 [nd_pmem]}
  mce: [Hardware Error]: TSC c51a63035d52 ADDR 3234bc4000 MISC 88
  mce: [Hardware Error]: PROCESSOR 0:50654 TIME 1526502199 SOCKET 0 APIC 38 microcode 2000043
  mce: [Hardware Error]: Run the above through 'mcelog --ascii'
  Kernel panic - not syncing: Machine check from unknown source

This confused everybody because the first line quite clearly shows
that we found a logged error in "Bank 1", while the last line says
"unknown source".

The problem is that the Linux code doesn't do the right thing
for a local machine check that results in a fatal error.

It turns out that we know very early in the handler whether the
machine check is fatal. The call to mce_no_way_out() has checked
all the banks for the CPU that took the local machine check. If
it says we must crash, we can do so right away with the right
messages.

We do scan all the banks again. This means that we might initially
not see a problem, but during the second scan find something fatal.
If this happens we print a slightly different message (so I can
see if it actually every happens).

[ bp: Remove unneeded severity assignment. ]
Signed-off-by: NTony Luck <tony.luck@intel.com>
Signed-off-by: NBorislav Petkov <bp@suse.de>
Signed-off-by: NThomas Gleixner <tglx@linutronix.de>
Cc: Ashok Raj <ashok.raj@intel.com>
Cc: Dan Williams <dan.j.williams@intel.com>
Cc: Qiuxu Zhuo <qiuxu.zhuo@intel.com>
Cc: linux-edac <linux-edac@vger.kernel.org>
Cc: stable@vger.kernel.org # 4.2
Link: http://lkml.kernel.org/r/52e049a497e86fd0b71c529651def8871c804df0.1527283897.git.tony.luck@intel.com
      40c36e27
    • B
      x86/mce: Do not overwrite MCi_STATUS in mce_no_way_out() · 1f74c8a6
      由 Borislav Petkov 提交于 
      mce_no_way_out() does a quick check during #MC to see whether some of
the MCEs logged would require the kernel to panic immediately. And it
passes a struct mce where MCi_STATUS gets written.

However, after having saved a valid status value, the next iteration
of the loop which goes over the MCA banks on the CPU, overwrites the
valid status value because we're using struct mce as storage instead of
a temporary variable.

Which leads to MCE records with an empty status value:

  mce: [Hardware Error]: CPU 0: Machine Check Exception: 6 Bank 0: 0000000000000000
  mce: [Hardware Error]: RIP 10:<ffffffffbd42fbd7> {trigger_mce+0x7/0x10}

In order to prevent the loss of the status register value, return
immediately when severity is a panic one so that we can panic
immediately with the first fatal MCE logged. This is also the intention
of this function and not to noodle over the banks while a fatal MCE is
already logged.

Tony: read the rest of the MCA bank to populate the struct mce fully.
Suggested-by: NTony Luck <tony.luck@intel.com>
Signed-off-by: NBorislav Petkov <bp@suse.de>
Signed-off-by: NThomas Gleixner <tglx@linutronix.de>
Cc: <stable@vger.kernel.org>
Link: https://lkml.kernel.org/r/20180622095428.626-8-bp@alien8.de
      1f74c8a6
  33. 21 6月, 2018 2 次提交