Skip to content

K
Kernel

openeuler / Kernel
接近 2 年 前同步成功

通知 8
Star 0
Fork 0
K
Kernel
切换分支/标签
  1. 20 8月, 2019 1 次提交
    • T
      x86/CPU/AMD: Clear RDRAND CPUID bit on AMD family 15h/16h · c49a0a80
      由 Tom Lendacky 提交于 
      There have been reports of RDRAND issues after resuming from suspend on
some AMD family 15h and family 16h systems. This issue stems from a BIOS
not performing the proper steps during resume to ensure RDRAND continues
to function properly.

RDRAND support is indicated by CPUID Fn00000001_ECX[30]. This bit can be
reset by clearing MSR C001_1004[62]. Any software that checks for RDRAND
support using CPUID, including the kernel, will believe that RDRAND is
not supported.

Update the CPU initialization to clear the RDRAND CPUID bit for any family
15h and 16h processor that supports RDRAND. If it is known that the family
15h or family 16h system does not have an RDRAND resume issue or that the
system will not be placed in suspend, the "rdrand=force" kernel parameter
can be used to stop the clearing of the RDRAND CPUID bit.

Additionally, update the suspend and resume path to save and restore the
MSR C001_1004 value to ensure that the RDRAND CPUID setting remains in
place after resuming from suspend.

Note, that clearing the RDRAND CPUID bit does not prevent a processor
that normally supports the RDRAND instruction from executing it. So any
code that determined the support based on family and model won't #UD.
Signed-off-by: NTom Lendacky <thomas.lendacky@amd.com>
Signed-off-by: NBorislav Petkov <bp@suse.de>
Cc: Andrew Cooper <andrew.cooper3@citrix.com>
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: Chen Yu <yu.c.chen@intel.com>
Cc: "H. Peter Anvin" <hpa@zytor.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Jonathan Corbet <corbet@lwn.net>
Cc: Josh Poimboeuf <jpoimboe@redhat.com>
Cc: Juergen Gross <jgross@suse.com>
Cc: Kees Cook <keescook@chromium.org>
Cc: "linux-doc@vger.kernel.org" <linux-doc@vger.kernel.org>
Cc: "linux-pm@vger.kernel.org" <linux-pm@vger.kernel.org>
Cc: Nathan Chancellor <natechancellor@gmail.com>
Cc: Paolo Bonzini <pbonzini@redhat.com>
Cc: Pavel Machek <pavel@ucw.cz>
Cc: "Rafael J. Wysocki" <rjw@rjwysocki.net>
Cc: <stable@vger.kernel.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: "x86@kernel.org" <x86@kernel.org>
Link: https://lkml.kernel.org/r/7543af91666f491547bd86cebb1e17c66824ab9f.1566229943.git.thomas.lendacky@amd.com
      c49a0a80
  3. 17 8月, 2019 1 次提交
  5. 16 8月, 2019 1 次提交
  7. 05 8月, 2019 2 次提交
    • P
      KVM: remove kvm_arch_has_vcpu_debugfs() · 741cbbae
      由 Paolo Bonzini 提交于 
      There is no need for this function as all arches have to implement
kvm_arch_create_vcpu_debugfs() no matter what.  A #define symbol
let us actually simplify the code.
Signed-off-by: NPaolo Bonzini <pbonzini@redhat.com>
      741cbbae
    • W
      KVM: Fix leak vCPU's VMCS value into other pCPU · 17e433b5
      由 Wanpeng Li 提交于 
      After commit d73eb57b (KVM: Boost vCPUs that are delivering interrupts), a
five years old bug is exposed. Running ebizzy benchmark in three 80 vCPUs VMs
on one 80 pCPUs Skylake server, a lot of rcu_sched stall warning splatting
in the VMs after stress testing:

 INFO: rcu_sched detected stalls on CPUs/tasks: { 4 41 57 62 77} (detected by 15, t=60004 jiffies, g=899, c=898, q=15073)
 Call Trace:
   flush_tlb_mm_range+0x68/0x140
   tlb_flush_mmu.part.75+0x37/0xe0
   tlb_finish_mmu+0x55/0x60
   zap_page_range+0x142/0x190
   SyS_madvise+0x3cd/0x9c0
   system_call_fastpath+0x1c/0x21

swait_active() sustains to be true before finish_swait() is called in
kvm_vcpu_block(), voluntarily preempted vCPUs are taken into account
by kvm_vcpu_on_spin() loop greatly increases the probability condition
kvm_arch_vcpu_runnable(vcpu) is checked and can be true, when APICv
is enabled the yield-candidate vCPU's VMCS RVI field leaks(by
vmx_sync_pir_to_irr()) into spinning-on-a-taken-lock vCPU's current
VMCS.

This patch fixes it by checking conservatively a subset of events.

Cc: Paolo Bonzini <pbonzini@redhat.com>
Cc: Radim Krčmář <rkrcmar@redhat.com>
Cc: Christian Borntraeger <borntraeger@de.ibm.com>
Cc: Marc Zyngier <Marc.Zyngier@arm.com>
Cc: stable@vger.kernel.org
Fixes: 98f4a146 (KVM: add kvm_arch_vcpu_runnable() test to kvm_vcpu_on_spin() loop)
Signed-off-by: NWanpeng Li <wanpengli@tencent.com>
Signed-off-by: NPaolo Bonzini <pbonzini@redhat.com>
      17e433b5
  9. 31 7月, 2019 1 次提交
  11. 29 7月, 2019 1 次提交
  13. 25 7月, 2019 1 次提交
    • M
      treewide: add "WITH Linux-syscall-note" to SPDX tag of uapi headers · d9c52522
      由 Masahiro Yamada 提交于 
      UAPI headers licensed under GPL are supposed to have exception
"WITH Linux-syscall-note" so that they can be included into non-GPL
user space application code.

The exception note is missing in some UAPI headers.

Some of them slipped in by the treewide conversion commit b2441318
("License cleanup: add SPDX GPL-2.0 license identifier to files with
no license"). Just run:

  $ git show --oneline b2441318 -- arch/x86/include/uapi/asm/

I believe they are not intentional, and should be fixed too.

This patch was generated by the following script:

  git grep -l --not -e Linux-syscall-note --and -e SPDX-License-Identifier \
    -- :arch/*/include/uapi/asm/*.h :include/uapi/ :^*/Kbuild |
  while read file
  do
          sed -i -e '/[[:space:]]OR[[:space:]]/s/\(GPL-[^[:space:]]*\)/(\1 WITH Linux-syscall-note)/g' \
          -e '/[[:space:]]or[[:space:]]/s/\(GPL-[^[:space:]]*\)/(\1 WITH Linux-syscall-note)/g' \
          -e '/[[:space:]]OR[[:space:]]/!{/[[:space:]]or[[:space:]]/!s/\(GPL-[^[:space:]]*\)/\1 WITH Linux-syscall-note/g}' $file
  done

After this patch is applied, there are 5 UAPI headers that do not contain
"WITH Linux-syscall-note". They are kept untouched since this exception
applies only to GPL variants.

  $ git grep --not -e Linux-syscall-note --and -e SPDX-License-Identifier \
    -- :arch/*/include/uapi/asm/*.h :include/uapi/ :^*/Kbuild
  include/uapi/drm/panfrost_drm.h:/* SPDX-License-Identifier: MIT */
  include/uapi/linux/batman_adv.h:/* SPDX-License-Identifier: MIT */
  include/uapi/linux/qemu_fw_cfg.h:/* SPDX-License-Identifier: BSD-3-Clause */
  include/uapi/linux/vbox_err.h:/* SPDX-License-Identifier: MIT */
  include/uapi/linux/virtio_iommu.h:/* SPDX-License-Identifier: BSD-3-Clause */
Signed-off-by: NMasahiro Yamada <yamada.masahiro@socionext.com>
Reviewed-by: NThomas Gleixner <tglx@linutronix.de>
Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>
      d9c52522
  15. 22 7月, 2019 2 次提交
    • W
      KVM: X86: Dynamically allocate user_fpu · d9a710e5
      由 Wanpeng Li 提交于 
      After reverting commit 240c35a3 (kvm: x86: Use task structs fpu field
for user), struct kvm_vcpu is 19456 bytes on my server, PAGE_ALLOC_COSTLY_ORDER(3)
is the order at which allocations are deemed costly to service. In serveless
scenario, one host can service hundreds/thoudands firecracker/kata-container
instances, howerver, new instance will fail to launch after memory is too
fragmented to allocate kvm_vcpu struct on host, this was observed in some
cloud provider product environments.

This patch dynamically allocates user_fpu, kvm_vcpu is 15168 bytes now on my
Skylake server.

Cc: Paolo Bonzini <pbonzini@redhat.com>
Cc: Radim Krčmář <rkrcmar@redhat.com>
Signed-off-by: NWanpeng Li <wanpengli@tencent.com>
Signed-off-by: NPaolo Bonzini <pbonzini@redhat.com>
      d9a710e5
    • P
      Revert "kvm: x86: Use task structs fpu field for user" · ec269475
      由 Paolo Bonzini 提交于 
      This reverts commit 240c35a3
("kvm: x86: Use task structs fpu field for user", 2018-11-06).
The commit is broken and causes QEMU's FPU state to be destroyed
when KVM_RUN is preempted.

Fixes: 240c35a3 ("kvm: x86: Use task structs fpu field for user")
Cc: stable@vger.kernel.org
Signed-off-by: NPaolo Bonzini <pbonzini@redhat.com>
      ec269475
  17. 20 7月, 2019 1 次提交
  19. 19 7月, 2019 2 次提交
    • J
      x86/kvm: Don't call kvm_spurious_fault() from .fixup · 3901336e
      由 Josh Poimboeuf 提交于 
      After making a change to improve objtool's sibling call detection, it
started showing the following warning:

  arch/x86/kvm/vmx/nested.o: warning: objtool: .fixup+0x15: sibling call from callable instruction with modified stack frame

The problem is the ____kvm_handle_fault_on_reboot() macro.  It does a
fake call by pushing a fake RIP and doing a jump.  That tricks the
unwinder into printing the function which triggered the exception,
rather than the .fixup code.

Instead of the hack to make it look like the original function made the
call, just change the macro so that the original function actually does
make the call.  This allows removal of the hack, and also makes objtool
happy.

I triggered a vmx instruction exception and verified that the stack
trace is still sane:

  kernel BUG at arch/x86/kvm/x86.c:358!
  invalid opcode: 0000 [#1] SMP PTI
  CPU: 28 PID: 4096 Comm: qemu-kvm Not tainted 5.2.0+ #16
  Hardware name: Lenovo THINKSYSTEM SD530 -[7X2106Z000]-/-[7X2106Z000]-, BIOS -[TEE113Z-1.00]- 07/17/2017
  RIP: 0010:kvm_spurious_fault+0x5/0x10
  Code: 00 00 00 00 00 8b 44 24 10 89 d2 45 89 c9 48 89 44 24 10 8b 44 24 08 48 89 44 24 08 e9 d4 40 22 00 0f 1f 40 00 0f 1f 44 00 00 <0f> 0b 66 0f 1f 84 00 00 00 00 00 0f 1f 44 00 00 41 55 49 89 fd 41
  RSP: 0018:ffffbf91c683bd00 EFLAGS: 00010246
  RAX: 000061f040000000 RBX: ffff9e159c77bba0 RCX: ffff9e15a5c87000
  RDX: 0000000665c87000 RSI: ffff9e15a5c87000 RDI: ffff9e159c77bba0
  RBP: 0000000000000000 R08: 0000000000000000 R09: ffff9e15a5c87000
  R10: 0000000000000000 R11: fffff8f2d99721c0 R12: ffff9e159c77bba0
  R13: ffffbf91c671d960 R14: ffff9e159c778000 R15: 0000000000000000
  FS:  00007fa341cbe700(0000) GS:ffff9e15b7400000(0000) knlGS:0000000000000000
  CS:  0010 DS: 0000 ES: 0000 CR0: 0000000080050033
  CR2: 00007fdd38356804 CR3: 00000006759de003 CR4: 00000000007606e0
  DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000
  DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400
  PKRU: 55555554
  Call Trace:
   loaded_vmcs_init+0x4f/0xe0
   alloc_loaded_vmcs+0x38/0xd0
   vmx_create_vcpu+0xf7/0x600
   kvm_vm_ioctl+0x5e9/0x980
   ? __switch_to_asm+0x40/0x70
   ? __switch_to_asm+0x34/0x70
   ? __switch_to_asm+0x40/0x70
   ? __switch_to_asm+0x34/0x70
   ? free_one_page+0x13f/0x4e0
   do_vfs_ioctl+0xa4/0x630
   ksys_ioctl+0x60/0x90
   __x64_sys_ioctl+0x16/0x20
   do_syscall_64+0x55/0x1c0
   entry_SYSCALL_64_after_hwframe+0x44/0xa9
  RIP: 0033:0x7fa349b1ee5b
Signed-off-by: NJosh Poimboeuf <jpoimboe@redhat.com>
Signed-off-by: NThomas Gleixner <tglx@linutronix.de>
Acked-by: NPaolo Bonzini <pbonzini@redhat.com>
Acked-by: NPeter Zijlstra (Intel) <peterz@infradead.org>
Link: https://lkml.kernel.org/r/64a9b64d127e87b6920a97afde8e96ea76f6524e.1563413318.git.jpoimboe@redhat.com
      3901336e
    • J
      x86/paravirt: Fix callee-saved function ELF sizes · 083db676
      由 Josh Poimboeuf 提交于 
      The __raw_callee_save_*() functions have an ELF symbol size of zero,
which confuses objtool and other tools.

Fixes a bunch of warnings like the following:

  arch/x86/xen/mmu_pv.o: warning: objtool: __raw_callee_save_xen_pte_val() is missing an ELF size annotation
  arch/x86/xen/mmu_pv.o: warning: objtool: __raw_callee_save_xen_pgd_val() is missing an ELF size annotation
  arch/x86/xen/mmu_pv.o: warning: objtool: __raw_callee_save_xen_make_pte() is missing an ELF size annotation
  arch/x86/xen/mmu_pv.o: warning: objtool: __raw_callee_save_xen_make_pgd() is missing an ELF size annotation
Signed-off-by: NJosh Poimboeuf <jpoimboe@redhat.com>
Signed-off-by: NThomas Gleixner <tglx@linutronix.de>
Reviewed-by: NJuergen Gross <jgross@suse.com>
Acked-by: NPeter Zijlstra (Intel) <peterz@infradead.org>
Link: https://lkml.kernel.org/r/afa6d49bb07497ca62e4fc3b27a2d0cece545b4e.1563413318.git.jpoimboe@redhat.com
      083db676
  21. 18 7月, 2019 2 次提交
  23. 17 7月, 2019 8 次提交
  25. 13 7月, 2019 4 次提交
    • M
      asm-generic, x86: introduce generic pte_{alloc,free}_one[_kernel] · 5fba4af4
      由 Mike Rapoport 提交于 
      Most architectures have identical or very similar implementation of
pte_alloc_one_kernel(), pte_alloc_one(), pte_free_kernel() and
pte_free().

Add a generic implementation that can be reused across architectures and
enable its use on x86.

The generic implementation uses

	GFP_KERNEL | __GFP_ZERO

for the kernel page tables and

	GFP_KERNEL | __GFP_ZERO | __GFP_ACCOUNT

for the user page tables.

The "base" functions for PTE allocation, namely __pte_alloc_one_kernel()
and __pte_alloc_one() are intended for the architectures that require
additional actions after actual memory allocation or must use non-default
GFP flags.

x86 is switched to use generic pte_alloc_one_kernel(), pte_free_kernel() and
pte_free().

x86 still implements pte_alloc_one() to allow run-time control of GFP
flags required for "userpte" command line option.

Link: http://lkml.kernel.org/r/1557296232-15361-2-git-send-email-rppt@linux.ibm.comSigned-off-by: NMike Rapoport <rppt@linux.ibm.com>
Cc: Albert Ou <aou@eecs.berkeley.edu>
Cc: Anshuman Khandual <anshuman.khandual@arm.com>
Cc: Anton Ivanov <anton.ivanov@cambridgegreys.com>
Cc: Arnd Bergmann <arnd@arndb.de>
Cc: Catalin Marinas <catalin.marinas@arm.com>
Cc: Geert Uytterhoeven <geert@linux-m68k.org>
Cc: Greentime Hu <green.hu@gmail.com>
Cc: Guan Xuetao <gxt@pku.edu.cn>
Cc: Guo Ren <guoren@kernel.org>
Cc: Guo Ren <ren_guo@c-sky.com>
Cc: Helge Deller <deller@gmx.de>
Cc: Ley Foon Tan <lftan@altera.com>
Cc: Matthew Wilcox <willy@infradead.org>
Cc: Matt Turner <mattst88@gmail.com>
Cc: Michael Ellerman <mpe@ellerman.id.au>
Cc: Michal Hocko <mhocko@suse.com>
Cc: Palmer Dabbelt <palmer@sifive.com>
Cc: Paul Burton <paul.burton@mips.com>
Cc: Ralf Baechle <ralf@linux-mips.org>
Cc: Richard Kuo <rkuo@codeaurora.org>
Cc: Richard Weinberger <richard@nod.at>
Cc: Russell King <linux@armlinux.org.uk>
Cc: Sam Creasey <sammy@sammy.net>
Cc: Vincent Chen <deanbo422@gmail.com>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
      5fba4af4
    • C
      mm: lift the x86_32 PAE version of gup_get_pte to common code · 39656e83
      由 Christoph Hellwig 提交于 
      The split low/high access is the only non-READ_ONCE version of gup_get_pte
that did show up in the various arch implemenations.  Lift it to common
code and drop the ifdef based arch override.

Link: http://lkml.kernel.org/r/20190625143715.1689-4-hch@lst.deSigned-off-by: NChristoph Hellwig <hch@lst.de>
Reviewed-by: NJason Gunthorpe <jgg@mellanox.com>
Cc: Andrey Konovalov <andreyknvl@google.com>
Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Cc: David Miller <davem@davemloft.net>
Cc: James Hogan <jhogan@kernel.org>
Cc: Khalid Aziz <khalid.aziz@oracle.com>
Cc: Michael Ellerman <mpe@ellerman.id.au>
Cc: Nicholas Piggin <npiggin@gmail.com>
Cc: Paul Burton <paul.burton@mips.com>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Ralf Baechle <ralf@linux-mips.org>
Cc: Rich Felker <dalias@libc.org>
Cc: Yoshinori Sato <ysato@users.sourceforge.jp>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
      39656e83
    • C
      mm: simplify gup_fast_permitted · 26f4c328
      由 Christoph Hellwig 提交于 
      Pass in the already calculated end value instead of recomputing it, and
leave the end > start check in the callers instead of duplicating them in
the arch code.

Link: http://lkml.kernel.org/r/20190625143715.1689-3-hch@lst.deSigned-off-by: NChristoph Hellwig <hch@lst.de>
Reviewed-by: NJason Gunthorpe <jgg@mellanox.com>
Cc: Andrey Konovalov <andreyknvl@google.com>
Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Cc: David Miller <davem@davemloft.net>
Cc: James Hogan <jhogan@kernel.org>
Cc: Khalid Aziz <khalid.aziz@oracle.com>
Cc: Michael Ellerman <mpe@ellerman.id.au>
Cc: Nicholas Piggin <npiggin@gmail.com>
Cc: Paul Burton <paul.burton@mips.com>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Ralf Baechle <ralf@linux-mips.org>
Cc: Rich Felker <dalias@libc.org>
Cc: Yoshinori Sato <ysato@users.sourceforge.jp>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
      26f4c328
    • M
      asm-generic, x86: add bitops instrumentation for KASAN · 751ad98d
      由 Marco Elver 提交于 
      This adds a new header to asm-generic to allow optionally instrumenting
architecture-specific asm implementations of bitops.

This change includes the required change for x86 as reference and
changes the kernel API doc to point to bitops-instrumented.h instead.
Rationale: the functions in x86's bitops.h are no longer the kernel API
functions, but instead the arch_ prefixed functions, which are then
instrumented via bitops-instrumented.h.

Other architectures can similarly add support for asm implementations of
bitops.

The documentation text was derived from x86 and existing bitops
asm-generic versions: 1) references to x86 have been removed; 2) as a
result, some of the text had to be reworded for clarity and consistency.

Tested using lib/test_kasan with bitops tests (pre-requisite patch).
Bugzilla ref: https://bugzilla.kernel.org/show_bug.cgi?id=198439

Link: http://lkml.kernel.org/r/20190613125950.197667-4-elver@google.comSigned-off-by: NMarco Elver <elver@google.com>
Acked-by: NMark Rutland <mark.rutland@arm.com>
Reviewed-by: NAndrey Ryabinin <aryabinin@virtuozzo.com>
Cc: Alexander Potapenko <glider@google.com>
Cc: Andrey Konovalov <andreyknvl@google.com>
Cc: Arnd Bergmann <arnd@arndb.de>
Cc: Borislav Petkov <bp@alien8.de>
Cc: Dmitry Vyukov <dvyukov@google.com>
Cc: "H. Peter Anvin" <hpa@zytor.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Jonathan Corbet <corbet@lwn.net>
Cc: Josh Poimboeuf <jpoimboe@redhat.com>
Cc: Peter Zijlstra (Intel) <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
      751ad98d
  27. 11 7月, 2019 2 次提交
  29. 10 7月, 2019 1 次提交
    • A
      x86/pgtable/32: Fix LOWMEM_PAGES constant · 26515699
      由 Arnd Bergmann 提交于 
      clang points out that the computation of LOWMEM_PAGES causes a signed
integer overflow on 32-bit x86:

arch/x86/kernel/head32.c:83:20: error: signed shift result (0x100000000) requires 34 bits to represent, but 'int' only has 32 bits [-Werror,-Wshift-overflow]
                (PAGE_TABLE_SIZE(LOWMEM_PAGES) << PAGE_SHIFT);
                                 ^~~~~~~~~~~~
arch/x86/include/asm/pgtable_32.h:109:27: note: expanded from macro 'LOWMEM_PAGES'
 #define LOWMEM_PAGES ((((2<<31) - __PAGE_OFFSET) >> PAGE_SHIFT))
                         ~^ ~~
arch/x86/include/asm/pgtable_32.h:98:34: note: expanded from macro 'PAGE_TABLE_SIZE'
 #define PAGE_TABLE_SIZE(pages) ((pages) / PTRS_PER_PGD)

Use the _ULL() macro to make it a 64-bit constant.

Fixes: 1e620f9b ("x86/boot/32: Convert the 32-bit pgtable setup code from assembly to C")
Signed-off-by: NArnd Bergmann <arnd@arndb.de>
Signed-off-by: NThomas Gleixner <tglx@linutronix.de>
Link: https://lkml.kernel.org/r/20190710130522.1802800-1-arnd@arndb.de
      26515699
  31. 09 7月, 2019 3 次提交
    • J
      x86/speculation: Prepare entry code for Spectre v1 swapgs mitigations · 18ec54fd
      由 Josh Poimboeuf 提交于 
      
Spectre v1 isn't only about array bounds checks.  It can affect any
conditional checks.  The kernel entry code interrupt, exception, and NMI
handlers all have conditional swapgs checks.  Those may be problematic in
the context of Spectre v1, as kernel code can speculatively run with a user
GS.

For example:

	if (coming from user space)
		swapgs
	mov %gs:<percpu_offset>, %reg
	mov (%reg), %reg1

When coming from user space, the CPU can speculatively skip the swapgs, and
then do a speculative percpu load using the user GS value.  So the user can
speculatively force a read of any kernel value.  If a gadget exists which
uses the percpu value as an address in another load/store, then the
contents of the kernel value may become visible via an L1 side channel
attack.

A similar attack exists when coming from kernel space.  The CPU can
speculatively do the swapgs, causing the user GS to get used for the rest
of the speculative window.

The mitigation is similar to a traditional Spectre v1 mitigation, except:

  a) index masking isn't possible; because the index (percpu offset)
     isn't user-controlled; and

  b) an lfence is needed in both the "from user" swapgs path and the
     "from kernel" non-swapgs path (because of the two attacks described
     above).

The user entry swapgs paths already have SWITCH_TO_KERNEL_CR3, which has a
CR3 write when PTI is enabled.  Since CR3 writes are serializing, the
lfences can be skipped in those cases.

On the other hand, the kernel entry swapgs paths don't depend on PTI.

To avoid unnecessary lfences for the user entry case, create two separate
features for alternative patching:

  X86_FEATURE_FENCE_SWAPGS_USER
  X86_FEATURE_FENCE_SWAPGS_KERNEL

Use these features in entry code to patch in lfences where needed.

The features aren't enabled yet, so there's no functional change.
Signed-off-by: NJosh Poimboeuf <jpoimboe@redhat.com>
Signed-off-by: NThomas Gleixner <tglx@linutronix.de>
Reviewed-by: NDave Hansen <dave.hansen@intel.com>
      18ec54fd
    • S
      x86/ldt: Initialize the context lock for init_mm · 39ca5fb4
      由 Sebastian Andrzej Siewior 提交于 
      The mutex mm->context->lock for init_mm is not initialized for init_mm.
This wasn't a problem because it remained unused. This changed however
since commit
	4fc19708 ("x86/alternatives: Initialize temporary mm for patching")

Initialize the mutex for init_mm.

Fixes: 4fc19708 ("x86/alternatives: Initialize temporary mm for patching")
Signed-off-by: NSebastian Andrzej Siewior <bigeasy@linutronix.de>
Signed-off-by: NThomas Gleixner <tglx@linutronix.de>
Reviewed-by: NNadav Amit <namit@vmware.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Andy Lutomirski <luto@kernel.org>
Link: https://lkml.kernel.org/r/20190701173354.2pe62hhliok2afea@linutronix.deSigned-off-by: NIngo Molnar <mingo@kernel.org>
      39ca5fb4
    • M
      Drivers: hv: vmbus: Break out ISA independent parts of mshyperv.h · 765e33f5
      由 Michael Kelley 提交于 
      Break out parts of mshyperv.h that are ISA independent into a
separate file in include/asm-generic. This move facilitates
ARM64 code reusing these definitions and avoids code
duplication. No functionality or behavior is changed.
Signed-off-by: NMichael Kelley <mikelley@microsoft.com>
Reviewed-by: NVitaly Kuznetsov <vkuznets@redhat.com>
Signed-off-by: NSasha Levin <sashal@kernel.org>
      765e33f5
  33. 07 7月, 2019 1 次提交
  35. 05 7月, 2019 1 次提交
    • S
      KVM: nVMX: Stash L1's CR3 in vmcs01.GUEST_CR3 on nested entry w/o EPT · f087a029
      由 Sean Christopherson 提交于 
      KVM does not have 100% coverage of VMX consistency checks, i.e. some
checks that cause VM-Fail may only be detected by hardware during a
nested VM-Entry.  In such a case, KVM must restore L1's state to the
pre-VM-Enter state as L2's state has already been loaded into KVM's
software model.

L1's CR3 and PDPTRs in particular are loaded from vmcs01.GUEST_*.  But
when EPT is disabled, the associated fields hold KVM's shadow values,
not L1's "real" values.  Fortunately, when EPT is disabled the PDPTRs
come from memory, i.e. are not cached in the VMCS.  Which leaves CR3
as the sole anomaly.

A previously applied workaround to handle CR3 was to force nested early
checks if EPT is disabled:

  commit 2b27924b ("KVM: nVMX: always use early vmcs check when EPT
                         is disabled")

Forcing nested early checks is undesirable as doing so adds hundreds of
cycles to every nested VM-Entry.  Rather than take this performance hit,
handle CR3 by overwriting vmcs01.GUEST_CR3 with L1's CR3 during nested
VM-Entry when EPT is disabled *and* nested early checks are disabled.
By stuffing vmcs01.GUEST_CR3, nested_vmx_restore_host_state() will
naturally restore the correct vcpu->arch.cr3 from vmcs01.GUEST_CR3.

These shenanigans work because nested_vmx_restore_host_state() does a
full kvm_mmu_reset_context(), i.e. unloads the current MMU, which
guarantees vmcs01.GUEST_CR3 will be rewritten with a new shadow CR3
prior to re-entering L1.

vcpu->arch.root_mmu.root_hpa is set to INVALID_PAGE via:

    nested_vmx_restore_host_state() ->
        kvm_mmu_reset_context() ->
            kvm_mmu_unload() ->
                kvm_mmu_free_roots()

kvm_mmu_unload() has WARN_ON(root_hpa != INVALID_PAGE), i.e. we can bank
on 'root_hpa == INVALID_PAGE' unless the implementation of
kvm_mmu_reset_context() is changed.

On the way into L1, VMCS.GUEST_CR3 is guaranteed to be written (on a
successful entry) via:

    vcpu_enter_guest() ->
        kvm_mmu_reload() ->
            kvm_mmu_load() ->
                kvm_mmu_load_cr3() ->
                    vmx_set_cr3()

Stuff vmcs01.GUEST_CR3 if and only if nested early checks are disabled
as a "late" VM-Fail should never happen win that case (KVM WARNs), and
the conditional write avoids the need to restore the correct GUEST_CR3
when nested_vmx_check_vmentry_hw() fails.
Signed-off-by: NSean Christopherson <sean.j.christopherson@intel.com>
Message-Id: <20190607185534.24368-1-sean.j.christopherson@intel.com>
Signed-off-by: NPaolo Bonzini <pbonzini@redhat.com>
      f087a029
  37. 03 7月, 2019 5 次提交
    • T
      x86/fsgsbase: Revert FSGSBASE support · 049331f2
      由 Thomas Gleixner 提交于 
      The FSGSBASE series turned out to have serious bugs and there is still an
open issue which is not fully understood yet.

The confidence in those changes has become close to zero especially as the
test cases which have been shipped with that series were obviously never
run before sending the final series out to LKML.

  ./fsgsbase_64 >/dev/null
  Segmentation fault

As the merge window is close, the only sane decision is to revert FSGSBASE
support. The revert is necessary as this branch has been merged into
perf/core already and rebasing all of that a few days before the merge
window is not the most brilliant idea.

I could definitely slap myself for not noticing the test case fail when
merging that series, but TBH my expectations weren't that low back
then. Won't happen again.

Revert the following commits:
539bca53 ("x86/entry/64: Fix and clean up paranoid_exit")
2c7b5ac5 ("Documentation/x86/64: Add documentation for GS/FS addressing mode")
f987c955 ("x86/elf: Enumerate kernel FSGSBASE capability in AT_HWCAP2")
2032f1f9 ("x86/cpu: Enable FSGSBASE on 64bit by default and add a chicken bit")
5bf0cab6 ("x86/entry/64: Document GSBASE handling in the paranoid path")
708078f6 ("x86/entry/64: Handle FSGSBASE enabled paranoid entry/exit")
79e1932f ("x86/entry/64: Introduce the FIND_PERCPU_BASE macro")
1d07316b ("x86/entry/64: Switch CR3 before SWAPGS in paranoid entry")
f60a83df ("x86/process/64: Use FSGSBASE instructions on thread copy and ptrace")
1ab5f3f7 ("x86/process/64: Use FSBSBASE in switch_to() if available")
a86b4625 ("x86/fsgsbase/64: Enable FSGSBASE instructions in helper functions")
8b71340d ("x86/fsgsbase/64: Add intrinsics for FSGSBASE instructions")
b64ed19b ("x86/cpu: Add 'unsafe_fsgsbase' to enable CR4.FSGSBASE")
Signed-off-by: NThomas Gleixner <tglx@linutronix.de>
Acked-by: NIngo Molnar <mingo@kernel.org>
Cc: Chang S. Bae <chang.seok.bae@intel.com>
Cc: Andy Lutomirski <luto@kernel.org>
Cc: Borislav Petkov <bp@alien8.de>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: Ravi Shankar <ravi.v.shankar@intel.com>
Cc: Dave Hansen <dave.hansen@linux.intel.com>
Cc: H. Peter Anvin <hpa@zytor.com>
      049331f2
    • M
      clocksource/drivers: Continue making Hyper-V clocksource ISA agnostic · dd2cb348
      由 Michael Kelley 提交于 
      Continue consolidating Hyper-V clock and timer code into an ISA
independent Hyper-V clocksource driver.

Move the existing clocksource code under drivers/hv and arch/x86 to the new
clocksource driver while separating out the ISA dependencies. Update
Hyper-V initialization to call initialization and cleanup routines since
the Hyper-V synthetic clock is not independently enumerated in ACPI.

Update Hyper-V clocksource users in KVM and VDSO to get definitions from
the new include file.

No behavior is changed and no new functionality is added.
Suggested-by: NMarc Zyngier <marc.zyngier@arm.com>
Signed-off-by: NMichael Kelley <mikelley@microsoft.com>
Signed-off-by: NThomas Gleixner <tglx@linutronix.de>
Reviewed-by: NVitaly Kuznetsov <vkuznets@redhat.com>
Cc: "bp@alien8.de" <bp@alien8.de>
Cc: "will.deacon@arm.com" <will.deacon@arm.com>
Cc: "catalin.marinas@arm.com" <catalin.marinas@arm.com>
Cc: "mark.rutland@arm.com" <mark.rutland@arm.com>
Cc: "linux-arm-kernel@lists.infradead.org" <linux-arm-kernel@lists.infradead.org>
Cc: "gregkh@linuxfoundation.org" <gregkh@linuxfoundation.org>
Cc: "linux-hyperv@vger.kernel.org" <linux-hyperv@vger.kernel.org>
Cc: "olaf@aepfle.de" <olaf@aepfle.de>
Cc: "apw@canonical.com" <apw@canonical.com>
Cc: "jasowang@redhat.com" <jasowang@redhat.com>
Cc: "marcelo.cerri@canonical.com" <marcelo.cerri@canonical.com>
Cc: Sunil Muthuswamy <sunilmut@microsoft.com>
Cc: KY Srinivasan <kys@microsoft.com>
Cc: "sashal@kernel.org" <sashal@kernel.org>
Cc: "vincenzo.frascino@arm.com" <vincenzo.frascino@arm.com>
Cc: "linux-arch@vger.kernel.org" <linux-arch@vger.kernel.org>
Cc: "linux-mips@vger.kernel.org" <linux-mips@vger.kernel.org>
Cc: "linux-kselftest@vger.kernel.org" <linux-kselftest@vger.kernel.org>
Cc: "arnd@arndb.de" <arnd@arndb.de>
Cc: "linux@armlinux.org.uk" <linux@armlinux.org.uk>
Cc: "ralf@linux-mips.org" <ralf@linux-mips.org>
Cc: "paul.burton@mips.com" <paul.burton@mips.com>
Cc: "daniel.lezcano@linaro.org" <daniel.lezcano@linaro.org>
Cc: "salyzyn@android.com" <salyzyn@android.com>
Cc: "pcc@google.com" <pcc@google.com>
Cc: "shuah@kernel.org" <shuah@kernel.org>
Cc: "0x7f454c46@gmail.com" <0x7f454c46@gmail.com>
Cc: "linux@rasmusvillemoes.dk" <linux@rasmusvillemoes.dk>
Cc: "huw@codeweavers.com" <huw@codeweavers.com>
Cc: "sfr@canb.auug.org.au" <sfr@canb.auug.org.au>
Cc: "pbonzini@redhat.com" <pbonzini@redhat.com>
Cc: "rkrcmar@redhat.com" <rkrcmar@redhat.com>
Cc: "kvm@vger.kernel.org" <kvm@vger.kernel.org>
Link: https://lkml.kernel.org/r/1561955054-1838-3-git-send-email-mikelley@microsoft.com
      dd2cb348
    • M
      clocksource/drivers: Make Hyper-V clocksource ISA agnostic · fd1fea68
      由 Michael Kelley 提交于 
      Hyper-V clock/timer code and data structures are currently mixed
in with other code in the ISA independent drivers/hv directory as
well as the ISA dependent Hyper-V code under arch/x86.

Consolidate this code and data structures into a Hyper-V clocksource driver
to better follow the Linux model. In doing so, separate out the ISA
dependent portions so the new clocksource driver works for x86 and for the
in-process Hyper-V on ARM64 code.

To start, move the existing clockevents code to create the new clocksource
driver. Update the VMbus driver to call initialization and cleanup routines
since the Hyper-V synthetic timers are not independently enumerated in
ACPI.

No behavior is changed and no new functionality is added.
Suggested-by: NMarc Zyngier <marc.zyngier@arm.com>
Signed-off-by: NMichael Kelley <mikelley@microsoft.com>
Signed-off-by: NThomas Gleixner <tglx@linutronix.de>
Reviewed-by: NVitaly Kuznetsov <vkuznets@redhat.com>
Cc: "bp@alien8.de" <bp@alien8.de>
Cc: "will.deacon@arm.com" <will.deacon@arm.com>
Cc: "catalin.marinas@arm.com" <catalin.marinas@arm.com>
Cc: "mark.rutland@arm.com" <mark.rutland@arm.com>
Cc: "linux-arm-kernel@lists.infradead.org" <linux-arm-kernel@lists.infradead.org>
Cc: "gregkh@linuxfoundation.org" <gregkh@linuxfoundation.org>
Cc: "linux-hyperv@vger.kernel.org" <linux-hyperv@vger.kernel.org>
Cc: "olaf@aepfle.de" <olaf@aepfle.de>
Cc: "apw@canonical.com" <apw@canonical.com>
Cc: "jasowang@redhat.com" <jasowang@redhat.com>
Cc: "marcelo.cerri@canonical.com" <marcelo.cerri@canonical.com>
Cc: Sunil Muthuswamy <sunilmut@microsoft.com>
Cc: KY Srinivasan <kys@microsoft.com>
Cc: "sashal@kernel.org" <sashal@kernel.org>
Cc: "vincenzo.frascino@arm.com" <vincenzo.frascino@arm.com>
Cc: "linux-arch@vger.kernel.org" <linux-arch@vger.kernel.org>
Cc: "linux-mips@vger.kernel.org" <linux-mips@vger.kernel.org>
Cc: "linux-kselftest@vger.kernel.org" <linux-kselftest@vger.kernel.org>
Cc: "arnd@arndb.de" <arnd@arndb.de>
Cc: "linux@armlinux.org.uk" <linux@armlinux.org.uk>
Cc: "ralf@linux-mips.org" <ralf@linux-mips.org>
Cc: "paul.burton@mips.com" <paul.burton@mips.com>
Cc: "daniel.lezcano@linaro.org" <daniel.lezcano@linaro.org>
Cc: "salyzyn@android.com" <salyzyn@android.com>
Cc: "pcc@google.com" <pcc@google.com>
Cc: "shuah@kernel.org" <shuah@kernel.org>
Cc: "0x7f454c46@gmail.com" <0x7f454c46@gmail.com>
Cc: "linux@rasmusvillemoes.dk" <linux@rasmusvillemoes.dk>
Cc: "huw@codeweavers.com" <huw@codeweavers.com>
Cc: "sfr@canb.auug.org.au" <sfr@canb.auug.org.au>
Cc: "pbonzini@redhat.com" <pbonzini@redhat.com>
Cc: "rkrcmar@redhat.com" <rkrcmar@redhat.com>
Cc: "kvm@vger.kernel.org" <kvm@vger.kernel.org>
Link: https://lkml.kernel.org/r/1561955054-1838-2-git-send-email-mikelley@microsoft.com
      fd1fea68
    • T
      x86/irq: Seperate unused system vectors from spurious entry again · f8a8fe61
      由 Thomas Gleixner 提交于 
      Quite some time ago the interrupt entry stubs for unused vectors in the
system vector range got removed and directly mapped to the spurious
interrupt vector entry point.

Sounds reasonable, but it's subtly broken. The spurious interrupt vector
entry point pushes vector number 0xFF on the stack which makes the whole
logic in __smp_spurious_interrupt() pointless.

As a consequence any spurious interrupt which comes from a vector != 0xFF
is treated as a real spurious interrupt (vector 0xFF) and not
acknowledged. That subsequently stalls all interrupt vectors of equal and
lower priority, which brings the system to a grinding halt.

This can happen because even on 64-bit the system vector space is not
guaranteed to be fully populated. A full compile time handling of the
unused vectors is not possible because quite some of them are conditonally
populated at runtime.

Bring the entry stubs back, which wastes 160 bytes if all stubs are unused,
but gains the proper handling back. There is no point to selectively spare
some of the stubs which are known at compile time as the required code in
the IDT management would be way larger and convoluted.

Do not route the spurious entries through common_interrupt and do_IRQ() as
the original code did. Route it to smp_spurious_interrupt() which evaluates
the vector number and acts accordingly now that the real vector numbers are
handed in.

Fixup the pr_warn so the actual spurious vector (0xff) is clearly
distiguished from the other vectors and also note for the vectored case
whether it was pending in the ISR or not.

 "Spurious APIC interrupt (vector 0xFF) on CPU#0, should never happen."
 "Spurious interrupt vector 0xed on CPU#1. Acked."
 "Spurious interrupt vector 0xee on CPU#1. Not pending!."

Fixes: 2414e021 ("x86: Avoid building unused IRQ entry stubs")
Reported-by: NJan Kiszka <jan.kiszka@siemens.com>
Signed-off-by: NThomas Gleixner <tglx@linutronix.de>
Cc: Marc Zyngier <marc.zyngier@arm.com>
Cc: Jan Beulich <jbeulich@suse.com>
Link: https://lkml.kernel.org/r/20190628111440.550568228@linutronix.de
      f8a8fe61
    • T
      x86/irq: Handle spurious interrupt after shutdown gracefully · b7107a67
      由 Thomas Gleixner 提交于 
      Since the rework of the vector management, warnings about spurious
interrupts have been reported. Robert provided some more information and
did an initial analysis. The following situation leads to these warnings:

   CPU 0                  CPU 1               IO_APIC

                                              interrupt is raised
                                              sent to CPU1
			  Unable to handle
			  immediately
			  (interrupts off,
			   deep idle delay)
   mask()
   ...
   free()
     shutdown()
     synchronize_irq()
     clear_vector()
                          do_IRQ()
                            -> vector is clear

Before the rework the vector entries of legacy interrupts were statically
assigned and occupied precious vector space while most of them were
unused. Due to that the above situation was handled silently because the
vector was handled and the core handler of the assigned interrupt
descriptor noticed that it is shut down and returned.

While this has been usually observed with legacy interrupts, this situation
is not limited to them. Any other interrupt source, e.g. MSI, can cause the
same issue.

After adding proper synchronization for level triggered interrupts, this
can only happen for edge triggered interrupts where the IO-APIC obviously
cannot provide information about interrupts in flight.

While the spurious warning is actually harmless in this case it worries
users and driver developers.

Handle it gracefully by marking the vector entry as VECTOR_SHUTDOWN instead
of VECTOR_UNUSED when the vector is freed up.

If that above late handling happens the spurious detector will not complain
and switch the entry to VECTOR_UNUSED. Any subsequent spurious interrupt on
that line will trigger the spurious warning as before.

Fixes: 464d1230 ("x86/vector: Switch IOAPIC to global reservation mode")
Reported-by: NRobert Hodaszi <Robert.Hodaszi@digi.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>-
Tested-by: NRobert Hodaszi <Robert.Hodaszi@digi.com>
Cc: Marc Zyngier <marc.zyngier@arm.com>
Link: https://lkml.kernel.org/r/20190628111440.459647741@linutronix.de
      b7107a67