Get rid of rbd_img_request_get(), because it isn't used, and maybe
won't ever be needed.
Signed-off-by: NAlex Elder <elder@inktank.com>
Reviewed-by: NJosh Durgin <josh.durgin@inktank.com>

Any changes to parent images are immaterial to any mapped clone.
So there is no need to have a watch event registered on header
objects except for the header object of an image that is mapped.
In fact, a watch request is a write operation, and we may only
have read access to a parent image.

We can't set up the watch request until we know the name of the
header object though.  So pass a flag to rbd_dev_image_probe() to
indicate whether this probe is for a mapping or for a parent image.

Change the second parameter to rbd_dev_header_watch_sync() be
Boolean while we're at it.

This resolves:
    http://tracker.ceph.com/issues/4941Signed-off-by: NAlex Elder <elder@inktank.com>
Reviewed-by: NJosh Durgin <josh.durgin@inktank.com>

The rbd_dev->mapping field for a parent image is not meaningful.
Since rbd_image_probe() is used both for images being mapped and
their parents, it doesn't make sense to set that flag in that
function.

So move the setting of the mapping.read_only flag out of
rbd_dev_image_probe() and into rbd_add() instead.

This resolves:
    http://tracker.ceph.com/issues/4940Signed-off-by: NAlex Elder <elder@inktank.com>
Reviewed-by: NJosh Durgin <josh.durgin@inktank.com>

Currently, rbd_img_parent_read() assumes the incoming object request
contains bio data.  But if a layered image is part of a multi-layer
stack of images it will result in read requests of page data to parent
images.

Fortunately, it's not hard to add support for page data.

This resolves:
    http://tracker.ceph.com/issues/4939Signed-off-by: NAlex Elder <elder@inktank.com>
Reviewed-by: NJosh Durgin <josh.durgin@inktank.com>

In rbd_img_obj_parent_read_full_callback() there is an assertion
intended to verify the size of the image request for a full parent
read was the size of the original request's target object.  But
assertion was looking at the parent image order rather than the
original one, and these values can differ.

Fix that.

This resolves:
    http://tracker.ceph.com/issues/4938Signed-off-by: NAlex Elder <elder@inktank.com>
Reviewed-by: NJosh Durgin <josh.durgin@inktank.com>

This rearranges rbd_dev_v2_refresh() so it works more like
rbd_dev_v1_header_info().  While format 1 images need to read the
whole header object to get any information, format 2 can collect
almost all information selectively.  So the one-time initialization
will remain in a separate function--based on rbd_dev_v2_probe().

Rename rbd_dev_v2_refresh() to be rbd_dev_v2_header_info(), and have
it call rbd_dev_v2_header_onetime() if it's being called for the
first time for the given rbd device.

Rename rbd_dev_v2_probe() to be rbd_dev_v2_header_onetime() and
remove the image size and snapshot context calls it held in
common with the refresh function.
Signed-off-by: NAlex Elder <elder@inktank.com>
Reviewed-by: NJosh Durgin <josh.durgin@inktank.com>

Get rid of the trivial wrapper functions rbd_dev_v1_refresh() and
rbd_dev_v1_probe(), substituting rbd_dev_v1_header_read() calls
in their place.

Rename rbd_dev_v1_header_read() to be rbd_dev_v1_header_info(), to
be more generic (it will better reflect what happens with format 2
images).
Signed-off-by: NAlex Elder <elder@inktank.com>
Reviewed-by: NJosh Durgin <josh.durgin@inktank.com>

An rbd_dev structure's fields are all zero-filled for an initial
probe, so there's no need to explicitly zero the parent_spec
and parent_overlap fields in rbd_dev_v1_probe().  Removing these
assignments makes rbd_dev_v1_probe() *almost* trivial.

Move the dout() message that announces discovery of an image into
rbd_dev_image_probe(), generalize to support images in either format
and only show it if an image is fully discovered.

This highlights that are some unnecessary cleanups in the error
path for rbd_dev_v1_probe(), so they can be removed.

Now rbd_dev_v1_probe() *is* a trivial wrapper function.
Signed-off-by: NAlex Elder <elder@inktank.com>
Reviewed-by: NJosh Durgin <josh.durgin@inktank.com>

Now that rbd_header_from_disk() only fills in one-time fields once,
we can extend it slightly so it releases the other fields before
replacing their values.  This way there's no need to pass a
temporary buffer and then copy all the results in.  Just use the rbd
device header structure in rbd_header_from_disk() so its values get
updated directly.

Note that this means we need to take the header semaphore at the
point we update things.  So pass the rbd_dev rather than the address
of its header as its first argument to rbd_header_from_disk(), and
have it return an error code.

As a result, rbd_dev_v1_header_read() does all the work,
rbd_read_header() becomes unnecessary, and rbd_dev_v1_refresh()
becomes a very simple wrapper.
Signed-off-by: NAlex Elder <elder@inktank.com>
Reviewed-by: NJosh Durgin <josh.durgin@inktank.com>

This rearranges rbd_header_from_disk so that it:
    - allocates the snapshot context right away
    - keeps results in local variables, not changing the passed-in
      header until it's known we'll succeed
    - does initialization of set-once fields in a header only if
      they have not already been set

The last point is moot at the moment, because rbd_read_header()
(the only caller) always supplies a zero-filled header buffer.
Signed-off-by: NAlex Elder <elder@inktank.com>
Reviewed-by: NJosh Durgin <josh.durgin@inktank.com>

The passed-in header structure is zeroed in rbd_header_from_disk().
Instead, have the caller do it.  Note that there are two callers,
rbd_dev_v1_refresh() and rbd_dev_v1_probe().  The latter already has
a zeroed header structure so zeroing it isn't necessary there.
Signed-off-by: NAlex Elder <elder@inktank.com>
Reviewed-by: NJosh Durgin <josh.durgin@inktank.com>

Defer setting the size and features fields of a mapped image until
after the Linux disk structure is set up.  Set the capacity of the
disk after that.

Rearrange the definition of rbd_image_header, separating the fields
that are set only once from those that can be updated.
Signed-off-by: NAlex Elder <elder@inktank.com>
Reviewed-by: NJosh Durgin <josh.durgin@inktank.com>

Hold off setting the read-only flag in rbd_add() for an image being
mapped until we have successfully probed the image.  At that point
we know whether it's a snapshot mapping or not, so we can set the
read-only flag in that one place rather than doing so (for
snapshots) in rbd_dev_mapping_set().  To do this, pass a flag to the
image probe routine indicating whether we want a read-only mapping.
Signed-off-by: NAlex Elder <elder@inktank.com>
Reviewed-by: NJosh Durgin <josh.durgin@inktank.com>

This function is a duplicate of rbd_dev_mapping_clear(), and was
added by mistake.
Signed-off-by: NAlex Elder <elder@inktank.com>
Reviewed-by: NJosh Durgin <josh.durgin@inktank.com>

Currently rbd_dev_mapping_set() looks up the snapshot id for the
snapshot whose name is found in the rbd device's spec structure.

That function gets called by rbd_dev_device_setup(), which is
called by rbd_add() *after* rbd_dev_image_probe().  If the
image probe succeeds, the rbd device's spec will already have
been updated to include names and ids for all fields.

Therefore there's no need to look up the snapshot id in
rbd_dev_mapping_set().
Signed-off-by: NAlex Elder <elder@inktank.com>
Reviewed-by: NJosh Durgin <josh.durgin@inktank.com>

The presence of the LAYERING bit in an rbd image's feature mask does
not guarantee the image actually has a parent image.  Currently that
bit is set only when a clone (i.e., image with a parent) is created,
but it is (currently) not cleared if that clone gets flattened back
into a "normal" image.  A "parent_id" query will leave the
parent_spec for the image being mapped a null pointer, but will not
return an error.

Currently, whenever an image with the LAYERED feature gets mapped, a
warning about the use of layered images gets printed.  But we don't
want to do this for a flattened image, so print the warning only
if we find there is a parent spec after the probe.
Signed-off-by: NAlex Elder <elder@inktank.com>
Reviewed-by: NJosh Durgin <josh.durgin@inktank.com>

Since rbd_update_mapping_size() is now a trivial wrapper, just open
code it in its two callers.
Signed-off-by: NAlex Elder <elder@inktank.com>
Reviewed-by: NJosh Durgin <josh.durgin@inktank.com>

When a mapped image changes size, we change the capacity recorded
for the Linux disk associated with it, in rbd_update_mapping_size().
That function is called in two places--the format 1 and format 2
refresh routines.

There is no need to set the capacity while holding the header
semaphore.  Instead, do it in the common rbd_dev_refresh(), using
the logic that's already there to initiate disk revalidation.

Add handling in the request function, just in case a request
that exceeds the capacity of the device comes in (perhaps one
that was started before a refresh shrunk the device).
Signed-off-by: NAlex Elder <elder@inktank.com>
Reviewed-by: NJosh Durgin <josh.durgin@inktank.com>

This commit:
    d98df63e rbd: revalidate_disk upon rbd resize
instituted a call to revalidate_disk() to notify interested parties
that a mapped image has changed size.  This works well, as long as
the the rbd device doesn't map a snapshot.

A snapshot will never change size.  However, the base image the
snapshot is associated with can, and it can do so while the snapshot
is mapped.

The problem is that the test for the size is looking at the size of
the base image, not the size of the mapped snapshot.  This patch
corrects that.

Update the warning message shown in the event of error, and move
it into the callers.

This resolves:
    http://tracker.ceph.com/issues/4911Signed-off-by: NAlex Elder <elder@inktank.com>
Reviewed-by: NJosh Durgin <josh.durgin@inktank.com>

When rbd_dev_v2_refresh() is called, the rbd device already has a
snapshot context associated with it.  But that never gets freed,
the pointer just gets overwritten.

Fix this by dropping the rbd device's reference to the snapshot
context before overwriting the pointer.

Because ceph_put_snap_context() already handles for a null pointer
we don't need to check for that (for the probe case, where no
context has yet been assigned).

This resolves:
    http://tracker.ceph.com/issues/4912Signed-off-by: NAlex Elder <elder@inktank.com>
Reviewed-by: NJosh Durgin <josh.durgin@inktank.com>

When a read for a layered image object finds the target object
doesn't exist, a read image request for the parent image is created
and submitted.  When that completes, the callback routine was
not releasing that parent image request.  Fix that.

The slab allocation stuff just added has greatly simplified the
search for the source of this memory leak.

This resolves:
    http://tracker.ceph.com/issues/4803Signed-off-by: NAlex Elder <elder@inktank.com>
Reviewed-by: NJosh Durgin <josh.durgin@inktank.com>

Create a slab cache to manage allocation of ceph_osdc_request
structures.

This resolves:
    http://tracker.ceph.com/issues/3926Signed-off-by: NAlex Elder <elder@inktank.com>
Reviewed-by: NJosh Durgin <josh.durgin@inktank.com>

Create a slab cache to manage ceph_msg_data structure allocation.

This is part of:
    http://tracker.ceph.com/issues/3926Signed-off-by: NAlex Elder <elder@inktank.com>
Reviewed-by: NJosh Durgin <josh.durgin@inktank.com>

Create a slab cache to manage ceph_msg structure allocation.

This is part of:
    http://tracker.ceph.com/issues/3926Signed-off-by: NAlex Elder <elder@inktank.com>
Reviewed-by: NJosh Durgin <josh.durgin@inktank.com>

The names of objects used for image object requests are always fixed
size.  So create a slab cache to manage them.  Define a new function
rbd_segment_name_free() to match rbd_segment_name() (which is what
supplies the dynamically-allocated name buffer).

This is part of:
    http://tracker.ceph.com/issues/3926Signed-off-by: NAlex Elder <elder@inktank.com>
Reviewed-by: NJosh Durgin <josh.durgin@inktank.com>

Create a slab cache to manage rbd_obj_request allocation.  We aren't
using a constructor, and we'll zero-fill object request structures
when they're allocated.

This is part of:
    http://tracker.ceph.com/issues/3926Signed-off-by: NAlex Elder <elder@inktank.com>
Reviewed-by: NJosh Durgin <josh.durgin@inktank.com>

The next patch will define a slab allocator for a object requests.
To use that we'll need to allocate the name of an object separate
from the request structure itself.
Signed-off-by: NAlex Elder <elder@inktank.com>
Reviewed-by: NJosh Durgin <josh.durgin@inktank.com>

Create a slab cache to manage rbd_img_request allocation.  Nothing
too fancy at this point--we'll still initialize everything at
allocation time (no constructor)

This is part of:
    http://tracker.ceph.com/issues/3926Signed-off-by: NAlex Elder <elder@inktank.com>
Reviewed-by: NJosh Durgin <josh.durgin@inktank.com>

Use bsearch(3) to make snapshot lookup by id more efficient.  (There
could be thousands of snapshots, and conceivably many more.)
Signed-off-by: NAlex Elder <elder@inktank.com>
Reviewed-by: NJosh Durgin <josh.durgin@inktank.com>

This functionality inadvertently disappeared in the last patch.

Image snapshots can get removed at just about any time.  In
particular it can disappear even if it is in use by an rbd
client as a mapped image.

The rbd client deals with such a disappearance by responding to new
requests with ENXIO.  This is implemented by each rbd device
maintaining an EXISTS flag, which is normally set but cleared if a
snapshot disappears.

This patch (re-)implements the clearing of that flag.

Whenever mapped image header information is refreshed, if the
mapping is for a snapshot, verify the mapped snapshot is still
present in the updated snapshot context.  If it is not, clear the
flag.

It is not necessary to check this in the initial probe, because the
probe will not succeed if the snapshot doesn't exist.

This resolves:
    http://tracker.ceph.com/issues/4880Signed-off-by: NAlex Elder <elder@inktank.com>
Reviewed-by: NJosh Durgin <josh.durgin@inktank.com>

We no longer use the snapshot list for anything.  When we need to
look up a snapshot name, id, size, or feature mask, we just do it
directly rather than relying on this list being updated with every
refresh.  The main reason it existed was for the benefit of the
device/sysfs entries that previously were associated with snapshots.

So get rid of the snapshot list, and struct rbd_snap, and the
hundreds of lines of code that supported them.

This resolves:
    http://tracker.ceph.com/issues/4868Signed-off-by: NAlex Elder <elder@inktank.com>
Reviewed-by: NJosh Durgin <josh.durgin@inktank.com>

This patch defines a handful of new functions that will allow
us to get rid of the rbd device structure's list of snapshots.

Define rbd_snap_id_by_name() to look up a snapshot id given its
name.  This is efficient for format 1 images but not for format 2.
Fortunately it only gets called at mapping time so it's not that
critical.

Use rbd_snap_id_by_name() to find out the id for a snapshot getting
mapped, and pass that id to new functions rbd_snap_size() and
rbd_snap_features() to look up information about a given snapshot's
size and feature mask given its snapshot id.  All this gets done
in rbd_dev_mapping_set().

As a result, snap_by_name() is no longer needed, so get rid of it.
Signed-off-by: NAlex Elder <elder@inktank.com>
Reviewed-by: NJosh Durgin <josh.durgin@inktank.com>

In order to align with what was needed for format 1 rbd images,
rbd_dev_v2_snap_info() was set up to take as argument an index into
the array of snapshot ids in a rbd device's snapshot context.

This switches that around, so we pass the snapshot id instead.
In doing this, rbd_snap_name() now returns a dynamically-allocated
string rather than a fixed one, so there's no need to make a
duplicate in its caller, rbd_dev_spec_update().

This means the following functions take a snapshot id where they
previously used an index value:
    rbd_dev_snap_info()
    rbd_dev_v1_snap_info()
    rbd_dev_v2_snap_info()

A new function, rbd_dev_snap_index(), determines the snap index for
format 1 images and uses it to look up the name.
Signed-off-by: NAlex Elder <elder@inktank.com>
Reviewed-by: NJosh Durgin <josh.durgin@inktank.com>

Rather than scanning the list of snapshot structures for it, scan
the snapshot context buffer containing snapshot names in order to
determine for a format 1 image the name associated with a given
snapshot id.

Pull out the part of rbd_dev_v1_snap_info() that does this scan into
a new function, _rbd_dev_v1_snap_name().  Have that function return
a dynamically-allocated copy of the name, and don't duplicate it in
rbd_dev_v1_snap_info().
Signed-off-by: NAlex Elder <elder@inktank.com>
Reviewed-by: NJosh Durgin <josh.durgin@inktank.com>

Nothing ever uses the version field maintained in the object request
structure any more, so get rid of it.
Signed-off-by: NAlex Elder <elder@inktank.com>
Reviewed-by: NJosh Durgin <josh.durgin@inktank.com>

Only NULL is passed as the version argument to rbd_obj_method_sync(),
so get rid of it.
Signed-off-by: NAlex Elder <elder@inktank.com>
Reviewed-by: NJosh Durgin <josh.durgin@inktank.com>

Continued from the last patch, more parameters that can go away
because we no longer have a need to track object versions.
Signed-off-by: NAlex Elder <elder@inktank.com>
Reviewed-by: NJosh Durgin <josh.durgin@inktank.com>

Several functions in rbd have parameters meant to allow the version
of an object to be passed in or out.  The purpose of those was to
allow the version of a header object to be maintained, but we no
longer do that.  As a result, these parameters are never actually
needed or used, so get rid of them.
Signed-off-by: NAlex Elder <elder@inktank.com>
Reviewed-by: NJosh Durgin <josh.durgin@inktank.com>

The rbd code takes care to maintain the version of the header
object.  This was done in hopes of using it to detect a change in
the object between reading it and setting up a watch request to
be notified of changes.

The mechanism was never fully implemented, however.  And we now
avoid the original problem by setting up the watch request before
ever reading the content of the header.

The osd doesn't interpret the object version supplied with a WATCH
osd op, nor does it use the version supplied with a NOTIFY_ACK op
(we can just supply 0 for both).  There is therefore no need to
maintain the header's object version any more, so stop doing so.

We'll be able to simplify some more rbd code in the next few patches
as a result of this.

This resolves:
    http://tracker.ceph.com/issues/3952Signed-off-by: NAlex Elder <elder@inktank.com>
Reviewed-by: NJosh Durgin <josh.durgin@inktank.com>

Make explicit that snapshot names don't change by making functions
return and take parameters that that point to const qualified data.

This resolves:
    http://tracker.ceph.com/issues/4867Signed-off-by: NAlex Elder <elder@inktank.com>
Reviewed-by: NJosh Durgin <josh.durgin@inktank.com>