Skip to content

K
Kernel

openeuler / Kernel
大约 2 年 前同步成功

通知 8
Star 0
Fork 0
K
Kernel
切换分支/标签
  1. 17 4月, 2020 1 次提交
  3. 16 4月, 2020 1 次提交
  5. 27 12月, 2019 10 次提交
  7. 27 11月, 2018 1 次提交
  9. 09 10月, 2018 3 次提交
  11. 02 10月, 2018 1 次提交
  13. 20 9月, 2018 1 次提交
  15. 11 9月, 2018 1 次提交
    • O
      Revert "cdc-acm: implement put_char() and flush_chars()" · df3aa13c
      由 Oliver Neukum 提交于 
      This reverts commit a81cf979.

The patch causes a regression, which I cannot find the reason for.
So let's revert for now, as a revert hurts only performance.

Original report:
I was trying to resolve the problem with Oliver but we don't get any conclusion
for 5 months, so I am now sending this to mail list and cdc_acm authors.

I am using simple request-response protocol to obtain the boiller parameters
in constant intervals.

A simple one transaction is:
1. opening the /dev/ttyACM0
2. sending the following 10-bytes request to the device:
   unsigned char req[] = {0x02, 0xfe, 0x01, 0x05, 0x08, 0x02, 0x01, 0x69, 0xab, 0x03};
3. reading response (frame of 74 bytes length).
4. closing the descriptor
I am doing this transaction with 5 seconds intervals.

Before the bad commit everything was working correctly: I've got a requests and
a responses in a timely manner.

After the bad commit more time I am using the kernel module, more problems I have.
The graph [2] is showing the problem.

As you can see after module load all seems fine but after about 30 minutes I've got
a plenty of EAGAINs when doing read()'s and trying to read back the data.

When I rmmod and insmod the cdc_acm module again, then the situation is starting
over again: running ok shortly after load, and more time it is running, more EAGAINs
I have when calling read().

As a bonus I can see the problem on the device itself:
The device is configured as you can see here on this screen [3].
It has two transmision LEDs: TX and RX. Blink duration is set for 100ms.
This is a recording before the bad commit when all is working fine: [4]
And this is with the bad commit: [5]
As you can see the TX led is blinking wrongly long (indicating transmission?)
and I have problems doing read() calls (EAGAIN).
Reported-by: NMariusz Bialonczyk <manio@skyboo.net>
Signed-off-by: NOliver Neukum <oneukum@suse.com>
Fixes: a81cf979 ("cdc-acm: implement put_char() and flush_chars()")
Cc: stable <stable@vger.kernel.org>
Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>
      df3aa13c
  17. 05 9月, 2018 1 次提交
  19. 24 7月, 2018 1 次提交
  21. 21 7月, 2018 6 次提交
  23. 16 7月, 2018 1 次提交
  25. 28 6月, 2018 4 次提交
  27. 25 6月, 2018 2 次提交
    • J
      usb: cdc-acm: Decrement tty port's refcount if probe() fail · cae2bc76
      由 Jaejoong Kim 提交于 
      The cdc-acm driver does not have a refcount of itself, but uses a
tty_port's refcount. That is, if the refcount of tty_port is '0', we
can clean up the cdc-acm driver by calling the .destruct()
callback function of struct tty_port_operations.

The problem is the destruct() callback function is not called if
the probe() fails, because tty_port's refcount is not zero. So,
add tty_port_put() when probe() fails.
Signed-off-by: NJaejoong Kim <climbbb.kim@gmail.com>
Acked-by: NOliver Neukum <oneukum@suse.com>
Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>
      cae2bc76
    • H
      usb: cdc_acm: Add quirk for Uniden UBC125 scanner · 4a762569
      由 Houston Yaroschoff 提交于 
      Uniden UBC125 radio scanner has USB interface which fails to work
with cdc_acm driver:
  usb 1-1.5: new full-speed USB device number 4 using xhci_hcd
  cdc_acm 1-1.5:1.0: Zero length descriptor references
  cdc_acm: probe of 1-1.5:1.0 failed with error -22

Adding the NO_UNION_NORMAL quirk for the device fixes the issue:
  usb 1-4: new full-speed USB device number 15 using xhci_hcd
  usb 1-4: New USB device found, idVendor=1965, idProduct=0018
  usb 1-4: New USB device strings: Mfr=1, Product=2, SerialNumber=3
  usb 1-4: Product: UBC125XLT
  usb 1-4: Manufacturer: Uniden Corp.
  usb 1-4: SerialNumber: 0001
  cdc_acm 1-4:1.0: ttyACM0: USB ACM device

`lsusb -v` of the device:

  Bus 001 Device 015: ID 1965:0018 Uniden Corporation
  Device Descriptor:
    bLength                18
    bDescriptorType         1
    bcdUSB               2.00
    bDeviceClass            2 Communications
    bDeviceSubClass         0
    bDeviceProtocol         0
    bMaxPacketSize0        64
    idVendor           0x1965 Uniden Corporation
    idProduct          0x0018
    bcdDevice            0.01
    iManufacturer           1 Uniden Corp.
    iProduct                2 UBC125XLT
    iSerial                 3 0001
    bNumConfigurations      1
    Configuration Descriptor:
      bLength                 9
      bDescriptorType         2
      wTotalLength           48
      bNumInterfaces          2
      bConfigurationValue     1
      iConfiguration          0
      bmAttributes         0x80
        (Bus Powered)
      MaxPower              500mA
      Interface Descriptor:
        bLength                 9
        bDescriptorType         4
        bInterfaceNumber        0
        bAlternateSetting       0
        bNumEndpoints           1
        bInterfaceClass         2 Communications
        bInterfaceSubClass      2 Abstract (modem)
        bInterfaceProtocol      0 None
        iInterface              0
        Endpoint Descriptor:
          bLength                 7
          bDescriptorType         5
          bEndpointAddress     0x87  EP 7 IN
          bmAttributes            3
            Transfer Type            Interrupt
            Synch Type               None
            Usage Type               Data
          wMaxPacketSize     0x0008  1x 8 bytes
          bInterval              10
      Interface Descriptor:
        bLength                 9
        bDescriptorType         4
        bInterfaceNumber        1
        bAlternateSetting       0
        bNumEndpoints           2
        bInterfaceClass        10 CDC Data
        bInterfaceSubClass      0 Unused
        bInterfaceProtocol      0
        iInterface              0
        Endpoint Descriptor:
          bLength                 7
          bDescriptorType         5
          bEndpointAddress     0x81  EP 1 IN
          bmAttributes            2
            Transfer Type            Bulk
            Synch Type               None
            Usage Type               Data
          wMaxPacketSize     0x0040  1x 64 bytes
          bInterval               0
        Endpoint Descriptor:
          bLength                 7
          bDescriptorType         5
          bEndpointAddress     0x02  EP 2 OUT
          bmAttributes            2
            Transfer Type            Bulk
            Synch Type               None
            Usage Type               Data
          wMaxPacketSize     0x0040  1x 64 bytes
          bInterval               0
  Device Status:     0x0000
    (Bus Powered)
Signed-off-by: NHouston Yaroschoff <hstn@4ever3.net>
Cc: stable <stable@vger.kernel.org>
Acked-by: NOliver Neukum <oneukum@suse.com>
Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>
      4a762569
  29. 18 5月, 2018 1 次提交
  31. 16 2月, 2018 1 次提交
    • D
      usb: cdc_acm: prevent race at write to acm while system resumes · b86b8eb6
      由 Dominik Bozek 提交于 
      ACM driver may accept data to transmit while system is not fully
resumed. In this case ACM driver buffers data and prepare URBs
on usb anchor list.
There is a little chance that two tasks put a char and initiate
acm_tty_flush_chars(). In such a case, driver will put one URB
twice on usb anchor list.
This patch also reset length of data before resue of a buffer.
This not only prevent sending rubbish, but also lower risc of race.

Without this patch we hit following kernel panic in one of our
stabilty/stress tests.

[   46.884442] *list_add double add*: new=ffff9b2ab7289330, prev=ffff9b2ab7289330, next=ffff9b2ab81e28e0.
[   46.884476] Modules linked in: hci_uart btbcm bluetooth rfkill_gpio igb_avb(O) cfg80211 snd_soc_sst_bxt_tdf8532 snd_soc_skl snd_soc_skl_ipc snd_soc_sst_ipc snd_soc_sst_dsp snd_soc_sst_acpi snd_soc_sst_match snd_hda_ext_core snd_hda_core trusty_timer trusty_wall trusty_log trusty_virtio trusty_ipc trusty_mem trusty_irq trusty virtio_ring virtio intel_ipu4_mmu_bxtB0 lib2600_mod_bxtB0 intel_ipu4_isys_mod_bxtB0 lib2600psys_mod_bxtB0 intel_ipu4_psys_mod_bxtB0 intel_ipu4_mod_bxtB0 intel_ipu4_wrapper_bxtB0 intel_ipu4_acpi videobuf2_dma_contig as3638 dw9714 lm3643 crlmodule smiapp smiapp_pll
[   46.884480] CPU: 1 PID: 33 Comm: kworker/u8:1 Tainted: G     U  W  O    4.9.56-quilt-2e5dc0ac-g618ed69ced6e-dirty #4
[   46.884489] Workqueue: events_unbound flush_to_ldisc
[   46.884494]  ffffb98ac012bb08 ffffffffad3e82e5 ffffb98ac012bb58 0000000000000000
[   46.884497]  ffffb98ac012bb48 ffffffffad0a23d1 00000024ad6374dd ffff9b2ab7289330
[   46.884500]  ffff9b2ab81e28e0 ffff9b2ab7289330 0000000000000002 0000000000000000
[   46.884501] Call Trace:
[   46.884507]  [<ffffffffad3e82e5>] dump_stack+0x67/0x92
[   46.884511]  [<ffffffffad0a23d1>] __warn+0xd1/0xf0
[   46.884513]  [<ffffffffad0a244f>] warn_slowpath_fmt+0x5f/0x80
[   46.884516]  [<ffffffffad407443>] __list_add+0xb3/0xc0
[   46.884521]  [<ffffffffad71133c>] *usb_anchor_urb*+0x4c/0xa0
[   46.884524]  [<ffffffffad782c6f>] *acm_tty_flush_chars*+0x8f/0xb0
[   46.884527]  [<ffffffffad782cd1>] *acm_tty_put_char*+0x41/0x100
[   46.884530]  [<ffffffffad4ced34>] tty_put_char+0x24/0x40
[   46.884533]  [<ffffffffad4d3bf5>] do_output_char+0xa5/0x200
[   46.884535]  [<ffffffffad4d3e98>] __process_echoes+0x148/0x290
[   46.884538]  [<ffffffffad4d654c>] n_tty_receive_buf_common+0x57c/0xb00
[   46.884541]  [<ffffffffad4d6ae4>] n_tty_receive_buf2+0x14/0x20
[   46.884543]  [<ffffffffad4d9662>] tty_ldisc_receive_buf+0x22/0x50
[   46.884545]  [<ffffffffad4d9c05>] flush_to_ldisc+0xc5/0xe0
[   46.884549]  [<ffffffffad0bcfe8>] process_one_work+0x148/0x440
[   46.884551]  [<ffffffffad0bdc19>] worker_thread+0x69/0x4a0
[   46.884554]  [<ffffffffad0bdbb0>] ? max_active_store+0x80/0x80
[   46.884556]  [<ffffffffad0c2e10>] kthread+0x110/0x130
[   46.884559]  [<ffffffffad0c2d00>] ? kthread_park+0x60/0x60
[   46.884563]  [<ffffffffadad9917>] ret_from_fork+0x27/0x40
[   46.884566] ---[ end trace 3bd599058b8a9eb3 ]---
Signed-off-by: NDominik Bozek <dominikx.bozek@intel.com>
Signed-off-by: NKuppuswamy Sathyanarayanan <sathyanarayanan.kuppuswamy@linux.intel.com>
Acked-by: NOliver Neukum <oneukum@suse.com>
Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>
      b86b8eb6
  33. 12 2月, 2018 1 次提交
    • L
      vfs: do bulk POLL* -> EPOLL* replacement · a9a08845
      由 Linus Torvalds 提交于 
      This is the mindless scripted replacement of kernel use of POLL*
variables as described by Al, done by this script:

    for V in IN OUT PRI ERR RDNORM RDBAND WRNORM WRBAND HUP RDHUP NVAL MSG; do
        L=`git grep -l -w POLL$V | grep -v '^t' | grep -v /um/ | grep -v '^sa' | grep -v '/poll.h$'|grep -v '^D'`
        for f in $L; do sed -i "-es/^\([^\"]*\)\(\<POLL$V\>\)/\\1E\\2/" $f; done
    done

with de-mangling cleanups yet to come.

NOTE! On almost all architectures, the EPOLL* constants have the same
values as the POLL* constants do.  But they keyword here is "almost".
For various bad reasons they aren't the same, and epoll() doesn't
actually work quite correctly in some cases due to this on Sparc et al.

The next patch from Al will sort out the final differences, and we
should be all done.
Scripted-by: NAl Viro <viro@zeniv.linux.org.uk>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
      a9a08845
  35. 24 1月, 2018 1 次提交
  37. 22 1月, 2018 1 次提交
  39. 16 1月, 2018 1 次提交
    • H
      USB: cdc-acm: Do not log urb submission errors on disconnect · f0386c08
      由 Hans de Goede 提交于 
      When disconnected sometimes the cdc-acm driver logs errors like these:

[20278.039417] cdc_acm 2-2:2.1: urb 9 failed submission with -19
[20278.042924] cdc_acm 2-2:2.1: urb 10 failed submission with -19
[20278.046449] cdc_acm 2-2:2.1: urb 11 failed submission with -19
[20278.049920] cdc_acm 2-2:2.1: urb 12 failed submission with -19
[20278.053442] cdc_acm 2-2:2.1: urb 13 failed submission with -19
[20278.056915] cdc_acm 2-2:2.1: urb 14 failed submission with -19
[20278.060418] cdc_acm 2-2:2.1: urb 15 failed submission with -19

Silence these by not logging errors when the result is -ENODEV.
Signed-off-by: NHans de Goede <hdegoede@redhat.com>
Acked-by: NOliver Neukum <oneukum@suse.com>
Cc: stable <stable@vger.kernel.org>
Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>
      f0386c08