Windows/BIOS always uses fixed N values. Let's match that
behaviour.

Allows us to also get rid of that constant_n quirk stuff.
Reviewed-by: NJani Nikula <jani.nikula@intel.com>
Signed-off-by: NVille Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20220907091057.11572-17-ville.syrjala@linux.intel.com

This reverts commit c6266862.

Part of a series where patches were modified while applying to resolve
conflicts, leading to further conflicts between drm-misc-next and
drm-intel-next, resulting in build failures in drm-tip. To be applied
again on a baseline with drm-misc-next and drm-intel-next in sync.
Acked-by: NRodrigo Vivi <rodrigo.vivi@intel.com>
Signed-off-by: NJani Nikula <jani.nikula@intel.com>

This reverts commit 7ae5ab44.

Part of a series where patches were modified while applying to resolve
conflicts, leading to further conflicts between drm-misc-next and
drm-intel-next, resulting in build failures in drm-tip. To be applied
again on a baseline with drm-misc-next and drm-intel-next in sync.
Acked-by: NRodrigo Vivi <rodrigo.vivi@intel.com>
Signed-off-by: NJani Nikula <jani.nikula@intel.com>

This reverts commit e1a84ba8.

Part of a series where patches were modified while applying to resolve
conflicts, leading to further conflicts between drm-misc-next and
drm-intel-next, resulting in build failures in drm-tip. To be applied
again on a baseline with drm-misc-next and drm-intel-next in sync.
Acked-by: NRodrigo Vivi <rodrigo.vivi@intel.com>
Signed-off-by: NJani Nikula <jani.nikula@intel.com>

Whenever we are not able to get enough timeslots
for required PBN, let's try to allocate those
using DSC, just same way as we do for SST.

v2: Removed intel_dp_mst_dsc_compute_config and refactored
    intel_dp_dsc_compute_config to support timeslots as a
    parameter(Ville Syrjälä)

v3: - Rebased
    - Added a debug to see that we at least try reserving
      VCPI slots using DSC, because currently its not visible
      from the logs, thus making debugging more tricky.
    - Moved timeslots to numerator, where it should be.

v4: - Call drm_dp_mst_atomic_check already during link
      config computation, because we need to know already
      by this moment if uncompressed amount of VCPI slots
      needed can fit, otherwise we need to use DSC.
      (thanks to Vinod Govindapillai for pointing this out)

v5: - Put pipe_config->bigjoiner_pipes back to original
      condition in intel_dp_dsc_compute_config
      (don't remember when I lost it)

v6: - Removed unnecessary drm_dp_mst_atomic_check as it is
      now always called in a newly introduced
      intel_dp_mst_find_vcpi_slots_for_bpp function
      (Vinod Govindapillai)
Reviewed-by: NVinod Govindapillai <vinod.govindapillai@intel.com>
Signed-off-by: NStanislav Lisovskiy <stanislav.lisovskiy@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20220905085744.29637-5-stanislav.lisovskiy@intel.com

We would be using almost same code to loop through bpps while calling
drm_dp_atomic_find_vcpi_slots - lets remove this duplication by
introducing a new function intel_dp_mst_find_vcpi_slots_for_bpp

v2: Fix pbn_div calculation - shouldn't matter if its DSC or not.
Reviewed-by: NVinod Govindapillai <vinod.govindapillai@intel.com>
Signed-off-by: NStanislav Lisovskiy <stanislav.lisovskiy@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20220905085744.29637-4-stanislav.lisovskiy@intel.com

We currently always exit that bpp loop because
drm_dp_atomic_find_vcpi_slots doesn't care if we actually
can fit those or not.
I think that wasn't the initial intention here, especially when
we keep trying with lower bpps, we are supposed to keep trying
until we actually find some _working_ configuration, which isn't the
case here.
So added that drm_dp_mst_check here, so that we can make sure
that try all the bpps before we fail.
Reviewed-by: NVinod Govindapillai <vinod.govindapillai@intel.com>
Signed-off-by: NStanislav Lisovskiy <stanislav.lisovskiy@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20220905085744.29637-3-stanislav.lisovskiy@intel.com

If drm_connector_init fails, intel_connector_free will be called to take
care of proper free. So it is necessary to drop the refcount of port
before intel_connector_free.

Fixes: 091a4f91 ("drm/i915: Handle drm-layer errors in intel_dp_add_mst_connector")
Signed-off-by: NHangyu Hua <hbh25y@gmail.com>
Reviewed-by: NJosé Roberto de Souza <jose.souza@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20220624130406.17996-1-jose.souza@intel.comSigned-off-by: NJosé Roberto de Souza <jose.souza@intel.com>
(cherry picked from commit cea9ed61)
Signed-off-by: NRodrigo Vivi <rodrigo.vivi@intel.com>

If drm_connector_init fails, intel_connector_free will be called to take
care of proper free. So it is necessary to drop the refcount of port
before intel_connector_free.

Fixes: 091a4f91 ("drm/i915: Handle drm-layer errors in intel_dp_add_mst_connector")
Signed-off-by: NHangyu Hua <hbh25y@gmail.com>
Reviewed-by: NJosé Roberto de Souza <jose.souza@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20220624130406.17996-1-jose.souza@intel.comSigned-off-by: NJosé Roberto de Souza <jose.souza@intel.com>
(cherry picked from commit cea9ed61)
Signed-off-by: NRodrigo Vivi <rodrigo.vivi@intel.com>

If drm_connector_init fails, intel_connector_free will be called to take
care of proper free. So it is necessary to drop the refcount of port
before intel_connector_free.

Fixes: 091a4f91 ("drm/i915: Handle drm-layer errors in intel_dp_add_mst_connector")
Signed-off-by: NHangyu Hua <hbh25y@gmail.com>
Reviewed-by: NJosé Roberto de Souza <jose.souza@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20220624130406.17996-1-jose.souza@intel.comSigned-off-by: NJosé Roberto de Souza <jose.souza@intel.com>

Reduce duplication.
Signed-off-by: NJani Nikula <jani.nikula@intel.com>
Reviewed-by: NVille Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20220330094109.4164326-2-jani.nikula@intel.com

128b/132b supports using 64 slots starting from 0, while 8b/10b reserves
slot 0 for metadata.

Commit d6c6a76f ("drm: Update MST First Link Slot Information Based
on Encoding Format") added support for updating the topology state
accordingly, and commit 41724ea2 ("drm/amd/display: Add DP 2.0 MST
DM Support") started using it in the amd driver.

This feels more than a little cumbersome, especially updating the
information in atomic check. For i915, add the update to MST connector
.compute_config hook rather than iterating over all MST managers and
connectors in global mode config .atomic_check. Fingers crossed.

v3:
- Propagate errors from intel_dp_mst_update_slots() (Ville)

v2:
- Update in .compute_config() not .atomic_check (Ville)

Cc: Bhawanpreet Lakha <Bhawanpreet.Lakha@amd.com>
Cc: Lyude Paul <lyude@redhat.com>
Cc: Uma Shankar <uma.shankar@intel.com>
Cc: Ville Syrjälä <ville.syrjala@linux.intel.com>
Acked-by: NLyude Paul <lyude@redhat.com>
Reviewed-by: NVille Syrjälä <ville.syrjala@linux.intel.com>
Signed-off-by: NJani Nikula <jani.nikula@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20220208152317.3019070-1-jani.nikula@intel.com

Let's do the cpu transcoder M/N setup next to where we program
most other cpu transcoder timings/etc.
Signed-off-by: NVille Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20220128103757.22461-9-ville.syrjala@linux.intel.comReviewed-by: NJani Nikula <jani.nikula@intel.com>

Instead of passing in the whole crtc state let's pass in just
the bits of state we need. This will help with the DRRS code
which shouldn't really be accessing the atomic state stuff directly
as it gets called outside the normal atomic flows.

v2: Fix set_m1_n1 vs. set_m2_n2 fumble for i9xx (Jani)
Signed-off-by: NVille Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20220128103757.22461-7-ville.syrjala@linux.intel.comReviewed-by: NJani Nikula <jani.nikula@intel.com>

Make things a bit more explicit by splitting
intel_cpu_transcoder_set_m_n() into separate variants for M1/N1 vs.
M2/N2. Makes the DRRS M/N programming at least more obvious.

Note that for the MST and DRRS cases we don't need to call the
M2/N2 variant at all since the transcoders that support those
do not have the M2/N2 registers.

Same could be said for i9xx_crtc_enable() but I want to do a
higher level code sharing between that valleyview_crtc_enable()
later in which case we do need the M2/N2 variant. This is also
why I keep the transcoder_has_m2_n2() in intel_cpu_transcoder_set_m2_n2()
so the caller doesn't have necessarily care what the chosen
transcoder supports.
Signed-off-by: NVille Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20220128103757.22461-5-ville.syrjala@linux.intel.comReviewed-by: NJani Nikula <jani.nikula@intel.com>

I want to make a clean split betwen the CPU vs. PCH transcoder
programming. To that end eliminate intel_dp_set_m_n() and just
call the individual CPU/PCH transcoder functions directly.
Signed-off-by: NVille Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20220128103757.22461-2-ville.syrjala@linux.intel.comReviewed-by: NJani Nikula <jani.nikula@intel.com>

Disabling planes in the middle of the modeset seuqnece does not make
sense since userspace can anyway disable planes before the modeset
even starts. So when the modeset seuqence starts the set of enabled
planes is entirely arbitrary. Trying to sprinkle the plane disabling
into the modeset sequence just means more randomness and potential
for hard to reproduce bugs.

So it makes most sense to just disable all planes first so that the
rest of the modeset sequence remains identical regardless of which
planes happen to be enabled by userspace at the time.

This reverts commit 84030adb.

Cc: José Roberto de Souza <jose.souza@intel.com>
Signed-off-by: NVille Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20211022103304.24164-3-ville.syrjala@linux.intel.comReviewed-by: NJosé Roberto de Souza <jose.souza@intel.com>

8b/10b encoding format requires to reserve the first slot for
recording metadata. Real data transmission starts from the second slot,
with a total of available 63 slots available.

In 128b/132b encoding format, metadata is transmitted separately
in LLCP packet before MTP. Real data transmission starts from
the first slot, with a total of 64 slots available.

v2:
* Move total/start slots to mst_state, and copy it to mst_mgr in
atomic_check

v3:
* Only keep the slot info on the mst_state
* add a start_slot parameter to the payload function, to facilitate non
  atomic drivers (this is a temporary workaround and should be removed when
  we are moving out the non atomic driver helpers)

v4:
*fixed typo and formatting

v5: (no functional changes)
* Fixed formatting in drm_dp_mst_update_slots()
* Reference mst_state instead of mst_state->mgr for debugging info
Signed-off-by: NBhawanpreet Lakha <Bhawanpreet.Lakha@amd.com>
Signed-off-by: NFangzhi Zuo <Jerry.Zuo@amd.com>
[v5 nitpicks]
Reviewed-by: NLyude Paul <lyude@redhat.com>
Signed-off-by: NLyude Paul <lyude@redhat.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20211025223825.301703-3-lyude@redhat.com

If we want to return from for_each_intel_connector_iter(), one
way is calling drm_connector_list_iter_end() before returning
to avoid memleak. The other way is just breaking from the bracket
and then returning after the outside drm_connector_list_iter_end().
Obviously, the second way makes code smaller and more clear.
Apply it to the function intel_dp_mst_atomic_master_trans_check().
Signed-off-by: NHe Ying <heying24@huawei.com>
Signed-off-by: NVille Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20211022022243.138860-1-heying24@huawei.com

Add a function for checking source MST support. Drop intel_dp->can_mst
and use intel_dp->mst_mgr.cbs to indicate the same. It's the single
point of truth without additional state variables. In code, "source
support" is also self-documenting as opposed to the vague "can mst".
Reviewed-by: NVille Syrjälä <ville.syrjala@linux.intel.com>
Signed-off-by: NJani Nikula <jani.nikula@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20211006101618.22066-1-jani.nikula@intel.com

There's a new register pair for 128b/132b mode where you need to set the
pixel clock in Hz.

v2: Fix UHBR rate check, use intel_dp_is_uhbr() helper

Bspec: 54128
Reviewed-by: NVille Syrjälä <ville.syrjala@linux.intel.com>
Signed-off-by: NJani Nikula <jani.nikula@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/a2902cc188973f022f282f2a77e693afdecefb5a.1631191763.git.jani.nikula@intel.com

PIPECONF becamse TRANSCONF when HSW introduced the EDP transcoder.
Bigjoiner is making life even more confusing by introducing
a N:1 relationship between pipes and transcoders. In that case
we only enable/configure the transcoder corresponding to the
master pipe. Let's do some renames to make it clear we're dealing
with the transcoder rather than pipe when it comes to
PIPECONF/TRANSCONF.

I decided to leave the _cpu_ part out from the function/macro
names since the PCH transcoder related stuff already has a
_pch_ in their name. So shouldn't be possible to confuse them.
Signed-off-by: NVille Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20210913144440.23008-6-ville.syrjala@linux.intel.comReviewed-by: NJani Nikula <jani.nikula@intel.com>

The MST code uses actual link rates in the limits struct, while the DP
code in general uses indexes to the ->common_rates[] array. Fix the
confusion by using actual link rate values everywhere. This is a better
abstraction than some obscure index.

Rename the struct members while at it to ensure all the places are
covered.
Reviewed-by: NVille Syrjälä <ville.syrjala@linux.intel.com>
Signed-off-by: NJani Nikula <jani.nikula@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/d70ab7261abacd367d3a6a47102575eb88a55cd4.1629735412.git.jani.nikula@intel.com

Less is more, fewer lines to wonder about.

Cc: Manasi Navare <manasi.d.navare@intel.com>
Reviewed-by: NRodrigo Vivi <rodrigo.vivi@intel.com>
Signed-off-by: NJani Nikula <jani.nikula@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20210813115610.20010-1-jani.nikula@intel.com

HDMI and DisplayPort sequences states that audio and PSR should be
disabled before planes are disabled.
Not following it did not caused any problems up to Alderlake-P but
for this platform it causes underruns during the PSR2 disable
sequence.

Specification don't mention that DRRS should be disabled before planes
but it looks safer to switch back to the default refresh rate before
following with the rest of the pipe disable sequence.

BSpec: 49191
BSpec: 49190
Cc: Ville Syrjälä <ville.syrjala@linux.intel.com>
Cc: Gwan-gyeong Mun <gwan-gyeong.mun@intel.com>
Signed-off-by: NJosé Roberto de Souza <jose.souza@intel.com>
Reviewed-by: NGwan-gyeong Mun <gwan-gyeong.mun@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20210726181559.80855-1-jose.souza@intel.com

A new step has been added to the DP modeset sequences for all platforms
with display version 12 and beyond:  if enabling DP MST with FEC, we
need to set a chicken bit before enabling the transcoder.  The chicken
bit should be disabled again before disabling the transcoder (which we
can do unconditionally since it shouldn't be set anyway in non-MST
cases).

Bspec: 49190, 54128, 55424
Signed-off-by: NMatt Roper <matthew.d.roper@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20210723170618.1477415-1-matthew.d.roper@intel.comReviewed-by: NJosé Roberto de Souza <jose.souza@intel.com>

Earlier HDCP over MST support was added for TGL Platform.
Extending it to all future platfroms.

v2:
- Remove the platform check and commit log changes. [Jani]
Signed-off-by: NAnshuman Gupta <anshuman.gupta@intel.com>
Reviewed-by: NJani Nikula <jani.nikula@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20210705122208.25618-1-anshuman.gupta@intel.com

Clear out the straggler 'intel_crtc' variables.
Signed-off-by: NVille Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20210609085632.22026-7-ville.syrjala@linux.intel.comReviewed-by: NRodrigo Vivi <rodrigo.vivi@intel.com>

[why]
Link rate in kHz is what is eventually required to calculate the link
bandwidth, which makes kHz a more generic unit. This should also make
forward-compatibility with new DP standards easier.

[how]
- Replace 'link rate DPCD code' with 'link rate in kHz' when used with
drm_dp_mst_topology_mgr_init()
- Add/remove related DPCD code conversion from/to kHz where applicable
Signed-off-by: NNikola Cornij <nikola.cornij@amd.com>
Acked-by: NJani Nikula <jani.nikula@intel.com>
Reviewed-by: NLyude Paul <lyude@redhat.com>
Signed-off-by: NLyude Paul <lyude@redhat.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20210512210011.8425-2-nikola.cornij@amd.com

Hoist the intel_de.h include from intel_display_types.h one
level up. I need this in order to untangle the include order
so that I can add tracepoints into intel_de.h.

This little cocci script did most of the work for me:
@find@
@@
(
intel_de_read(...)
|
intel_de_read_fw(...)
|
intel_de_write(...)
|
intel_de_write_fw(...)
)

@has_include@
@@
(
 #include "intel_de.h"
|
 #include "display/intel_de.h"
)

@depends on find && !has_include@
@@
+ #include "intel_de.h"
  #include "intel_display_types.h"

@depends on find && !has_include@
@@
+ #include "display/intel_de.h"
  #include "display/intel_display_types.h"

Cc: Cooper Chiou <cooper.chiou@intel.com>
Reviewed-by: NAnshuman Gupta <anshuman.gupta@intel.com>
Reviewed-by: NJani Nikula <jani.nikula@intel.com>
Signed-off-by: NVille Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20210430143945.6776-1-ville.syrjala@linux.intel.com

[why]
Previously used value was not safe to provide the correct value, i.e. it
could be 0 if not not configured, leading to no MST on this platform.

[how]
Do not use the value from BIOS, but from the structure populated at
encoder initialization time.

Fixes: 98025a62 ("drm/dp_mst: Use Extended Base Receiver Capability DPCD space")
Signed-off-by: NNikola Cornij <nikola.cornij@amd.com>
Reviewed-by: NLyude Paul <lyude@redhat.com>
Acked-by: NVille Syrjälä <ville.syrjala@linux.intel.com>
[fixed open coded drm_dp_link_rate_to_bw_code()]
Signed-off-by: NLyude Paul <lyude@redhat.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20210430214531.24565-2-nikola.cornij@amd.com

[why]
DP 1.4a spec mandates that if DP_EXTENDED_RECEIVER_CAP_FIELD_PRESENT is
set, Extended Base Receiver Capability DPCD space must be used. Without
doing that, the three DPCD values that differ will be wrong, leading to
incorrect or limited functionality. MST link rate, for example, could
have a lower value. Also, Synaptics quirk wouldn't work out well when
Extended DPCD was not read, resulting in no DSC for such hubs.

[how]
Modify MST topology manager to use the values from Extended DPCD where
applicable.

To prevent regression on the sources that have a lower maximum link rate
capability than MAX_LINK_RATE from Extended DPCD, have the drivers
supply maximum lane count and rate at initialization time.

This also reverts commit 2dcab875 ("Revert drm/dp_mst: Retrieve
extended DPCD caps for topology manager"), brining the change back to the
original commit ad44c032 ("drm/dp_mst: Retrieve extended DPCD caps for
topology manager").
Signed-off-by: NNikola Cornij <nikola.cornij@amd.com>
Reviewed-by: NLyude Paul <lyude@redhat.com>
Signed-off-by: NLyude Paul <lyude@redhat.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20210429221151.22020-2-nikola.cornij@amd.com

The definitions are in the crtc and dpll files; move the declarations to
the corresponding headers.
Reviewed-by: NVille Syrjälä <ville.syrjala@linux.intel.com>
Signed-off-by: NJani Nikula <jani.nikula@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20210427120315.12342-1-jani.nikula@intel.com

Add separate intel_dp_hdcp.h to go with intel_dp_hdcp.c, and rename the
init function intel_dp_hdcp_init() to follow naming where function
prefix matches the file name.
Reviewed-by: NRodrigo Vivi <rodrigo.vivi@intel.com>
Signed-off-by: NJani Nikula <jani.nikula@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20210427114520.4740-1-jani.nikula@intel.com

Since this is one of the few functions in drm_dp_mst_topology.c that
doesn't have any way of getting access to a drm_device, let's pass the
drm_dp_mst_topology_mgr down to this function so that it can use
drm_dbg_kms().
Signed-off-by: NLyude Paul <lyude@redhat.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20210423184309.207645-14-lyude@redhat.comReviewed-by: NDave Airlie <airlied@redhat.com>

Now that we've eliminated INTEL_GEN(), IS_GEN_RANGE(), etc. from the
display code, we should also kill off our use of the IS_GEN9_* macros
too.  We'll do the conversion manually this time instead of using
Coccinelle since the most logical substitution can depend heavily on the
code context, and sometimes we can keep the code simpler if we make
additional adjustments such as swapping the order of if/else arms.

v2:
 - Restore a lost negation in intel_pll_is_valid().

Cc: Ville Syrjälä <ville.syrjala@linux.intel.com>
Cc: Lucas De Marchi <lucas.demarchi@intel.com>
Signed-off-by: NMatt Roper <matthew.d.roper@intel.com>
Reviewed-by: NRadhakrishna Sripada <radhakrishna.sripada@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20210407203945.1432531-1-matthew.d.roper@intel.com
(cherry picked from commit 70bfb307)
[Jani: cherry picked to topic branch to reduce conflicts]
Signed-off-by: NJani Nikula <jani.nikula@intel.com>

Now that we've eliminated INTEL_GEN(), IS_GEN_RANGE(), etc. from the
display code, we should also kill off our use of the IS_GEN9_* macros
too.  We'll do the conversion manually this time instead of using
Coccinelle since the most logical substitution can depend heavily on the
code context, and sometimes we can keep the code simpler if we make
additional adjustments such as swapping the order of if/else arms.

v2:
 - Restore a lost negation in intel_pll_is_valid().

Cc: Ville Syrjälä <ville.syrjala@linux.intel.com>
Cc: Lucas De Marchi <lucas.demarchi@intel.com>
Signed-off-by: NMatt Roper <matthew.d.roper@intel.com>
Reviewed-by: NRadhakrishna Sripada <radhakrishna.sripada@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20210407203945.1432531-1-matthew.d.roper@intel.com

Use Coccinelle to convert most of the usage of INTEL_GEN() and IS_GEN()
in the display code to use DISPLAY_VER() comparisons instead.  The
following semantic patch was used:

        @@ expression dev_priv, E; @@
        - INTEL_GEN(dev_priv) == E
        + IS_DISPLAY_VER(dev_priv, E)

        @@ expression dev_priv; @@
        - INTEL_GEN(dev_priv)
        + DISPLAY_VER(dev_priv)

        @@ expression dev_priv; expression E; @@
        - IS_GEN(dev_priv, E)
        + IS_DISPLAY_VER(dev_priv, E)

        @@
        expression dev_priv;
        expression from, until;
        @@
        - IS_GEN_RANGE(dev_priv, from, until)
        + IS_DISPLAY_RANGE(dev_priv, from, until)

There are still some display-related uses of INTEL_GEN() in intel_pm.c
(watermark code) and i915_irq.c.  Those will be updated separately.

v2:
 - Use new IS_DISPLAY_RANGE and IS_DISPLAY_VER helpers.  (Jani)
Signed-off-by: NMatt Roper <matthew.d.roper@intel.com>
Reviewed-by: NLucas De Marchi <lucas.demarchi@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20210320044245.3920043-4-matthew.d.roper@intel.com

Stop assuming intel_ddi_get_config() is all we need from the primary
encoder, and instead call it via the .get_config() vfunc. This
will allow customized .get_config() for the primary, which I plan
to use to handle the differences in the clock readout between various
platforms.
Signed-off-by: NVille Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20210224144214.24803-2-ville.syrjala@linux.intel.comReviewed-by: NMika Kahola <mika.kahola@intel.com>

This moves the code from various places and consolidates it
into one new file.

v2:
- rename skl_program_plane -> skl_program_plane_scaler (Ville)
- also move skl_pfit_enable, and consequently make some skl_scaler_*
  functions static to skl_scaler.c (Ville)
Signed-off-by: NDave Airlie <airlied@redhat.com>
Reviewed-by: NVille Syrjälä <ville.syrjala@linux.intel.com>
Signed-off-by: NJani Nikula <jani.nikula@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/2fa703ffc7b96a41c392fd5ebbd2e6e4ffb6fb05.1612536383.git.jani.nikula@intel.com