Our vGPU doesn't have a device ROM, we need follow the PCI spec to
report this info to drivers. Otherwise, we would see below errors.

Inspecting possible rom at 0xfe049000 (vd=8086:1912 bdf=00:10.0)
qemu-system-x86_64: vfio-pci: Cannot read device rom at 00000000-0000-0000-0000-000000000001
Device option ROM contents are probably invalid (check dmesg).
Skip option ROM probe with rombar=0, or load from file with romfile=No option rom signature (got 4860)

I will also send a improvement patch to PCI subsystem related to PCI ROM.
But no idea to omit below error, since no pattern to detect vbios shadow
without touch its content.
0000:00:10.0: Invalid PCI ROM header signature: expecting 0xaa55, got 0x0000
Signed-off-by: NChangbin Du <changbin.du@intel.com>
Signed-off-by: NZhenyu Wang <zhenyuw@linux.intel.com>

gvt_vgpu_err means something goes wrong. We need the error propagates to
kernel message by default.
Signed-off-by: NChangbin Du <changbin.du@intel.com>
Signed-off-by: NZhenyu Wang <zhenyuw@linux.intel.com>

I have seen the cmd parser dump partial odd info. Stop that and only dump
the full verbose info when debug enabled.
Signed-off-by: NChangbin Du <changbin.du@intel.com>
Signed-off-by: NZhenyu Wang <zhenyuw@linux.intel.com>

Use I915_WRITE_FW instead of I915_WRITE to reduce overhead.
The overall mmio switch latency lowers from ~600us to ~180us.
Signed-off-by: NChangbin Du <changbin.du@intel.com>
Signed-off-by: NZhenyu Wang <zhenyuw@linux.intel.com>

gvt-linux.git repo is moved for its new place under
https://github.com/intel/gvt-linux.git

Old https://github.com/01org/gvt-linux.git is set
only for redirect now.
Signed-off-by: NZhenyu Wang <zhenyuw@linux.intel.com>

This new debugfs entry is used to figure out which registers of vGPU
is different to host. It is a useful tool for new platform enabling
and debugging. When read this entry, all the diff mmio are recognized
and sorted by mmio offset. Besides, the bit positions of different
value are listed in 'Diff' column. Here is a show:

$ sudo cat ./mmio_diff
Offset   HW       vGPU     Diff
00002030 000025f8 00000000 3-8,10,13
00002034 012025f8 00000000 3-8,10,13,21,24
00002038 027fb000 00000000 12-13,15-22,25
0000203c 00003000 00000000 12-13
00002054 0000000a 00000040 1,3,6
00002074 012025f8 00000000 3-8,10,13,21,24
00002080 fffe6000 00000000 13-14,17-31
000020a8 fffffeff ffffffff 8
000020d4 00000004 00000000 2
....
00145974 eb42718c 010c11b0 2-5,13-14,17-19,22,25,27,29-31
00145978 0000002f 0000002a 0,2
0014597c 0000002f 0000002a 0,2
00145980 0000002b 00000028 0-1
00145984 a5a87c9e b27d20c0 1-4,6,10-12,14,16,18,20,22-26,28
001459c0 88390000 883c0000 16,18
00146200 88350000 883a0000 16-19
Total: 72432, Diff: 901

v3: fix a typo.
v2: add mmio_hw_access_pre/post().
Signed-off-by: NChangbin Du <changbin.du@intel.com>
Signed-off-by: NZhenyu Wang <zhenyuw@linux.intel.com>

This patch add a function intel_gvt_for_each_tracked_mmio() to
iterate each tracked mmio. The caller don't be aware of how the
tracked mmios are presented internally.

v2: remove snapshot_hw_mmio_registers().
Signed-off-by: NChangbin Du <changbin.du@intel.com>
Signed-off-by: NZhenyu Wang <zhenyuw@linux.intel.com>

this is an enhanced opregion emulation for win guest support
by initializing more data members including opregion header
size, version and child device propertity for display port.
for simplicity, redefined child_device_config structure.
Signed-off-by: NXiaolin Zhang <xiaolin.zhang@intel.com>
Signed-off-by: NZhenyu Wang <zhenyuw@linux.intel.com>

The engine provides a mirror of the CSB and CSB write pointer in the HWSP.
Read these status from virtual HWSP in VM can reduce CPU utilization while
applications have much more short GPU workloads. Here we update the
corresponding data in virtual HWSP as it in virtual MMIO.

Before read these status from HWSP in GVT-g VM, please ensure the host
support it by checking the BIT(3) of caps in PVINFO.

Virtual HWSP only support GEN8+ platform, since the HWSP MMIO may change
follow the platform update, please add the corresponding MMIO emulation
when enable new platforms in GVT-g.

v3 : Add address audit in HWSP address update.

v4 :
     Separate this patch with enalbe virtual HWSP in VM.
     Use intel_gvt_render_mmio_to_ring_id() to determine ring_id by offset.

v5 : Remove unnessary check about Gen8, GVT-g only support Gen8+.
Signed-off-by: NWeinan Li <weinan.z.li@intel.com>
Cc: Zhenyu Wang <zhenyuw@linux.intel.com>
Signed-off-by: NZhenyu Wang <zhenyuw@linux.intel.com>

Refine previously broken PPGTT scratch. Scratch PTE was no correctly
handled and also the handling of scratch entries in page table walk was
not well organized, which brings gaps of introducing lazy shadow.
Signed-off-by: NZhi Wang <zhi.a.wang@intel.com>

We need ops->set_present() during generating a new scratch page table
entry.
Signed-off-by: NZhi Wang <zhi.a.wang@intel.com>

Need to figure out page table type of current level by GTT entry type
during getting a scratch page table entry.
Signed-off-by: NZhi Wang <zhi.a.wang@intel.com>

During a vGPU reset, the scratch page table shouldn't be cleared, what
needs to be cleared should be the scratch page.
Signed-off-by: NZhi Wang <zhi.a.wang@intel.com>

As we want to re-use intel_vgpu_shadow_page in buidling scrach page table
and we don't want to put scrach page table page into hash table, a new
param is introduced to give the caller a choice to decide if a shadow page
should be put into hash table.
Signed-off-by: NZhi Wang <zhi.a.wang@intel.com>

As there is already an I915_GTT_PAGE_SIZE marco in i915, let GVT-g use it
as well. Also this patch re-names some GTT marcos with additional prefix.
Signed-off-by: NZhi Wang <zhi.a.wang@intel.com>

Since many emulation logic needs to convert the offset of ring registers
into ring id, we export it for other caller which might need it.
Signed-off-by: NZhi Wang <zhi.a.wang@intel.com>

As the data structure of "intel_vgpu_guest_page" will become much heavier
in future, it's better to factor out the guest memory page track mechnisim
as early as possible.
Signed-off-by: NZhi Wang <zhi.a.wang@intel.com>

1) Use standard i915 GEM object sequence to access the shadow batch buffer.
2) Manage i915 vma life cycle to solve one FIXME.

v2:
- Refine code structure.
- Refine the usage of GEM APIs.
- Add the missing lock/unlock in release_shadow_batch_buffer.

Test on my SKL NuC.
Signed-off-by: NZhi Wang <zhi.a.wang@intel.com>

Returns the error code if something is wrong and the size of batch buffer
is passed through the pointer.
Signed-off-by: NZhi Wang <zhi.a.wang@intel.com>

Replace the plain bit usage with BIT() to make klockwork happy.

Cc: Deng Hongyi <hongyi.deng@intel.com>
Signed-off-by: NZhi Wang <zhi.a.wang@intel.com>

We need debugfs entry to expose some debug information of gvt and vGPUs.
The first tool will be added is mmio-diff, which help to find the
difference values of host and vGPU mmio. It's useful for platform
enabling.

This patch just add a basic debugfs infrastructure, each vGPU has its own
sub-folder. Two simple attributes are created as a template.
.
├── num_tracked_mmio
├── vgpu1
|   └── active
└── vgpu2
    └── active
Signed-off-by: NChangbin Du <changbin.du@intel.com>
Reviewed-by: NZhi Wang <zhi.a.wang@intel.com>
Signed-off-by: NZhi Wang <zhi.a.wang@intel.com>

all the vGPU type related code in kvmgt will be moved into
gvt.c/gvt.h files while the common vGPU type related interfaces
will be called.

v2:
- intel_gvt_{init,cleanup}_vgpu_type_groups are initialized in
  gvt part. (Wang, Zhi)
Signed-off-by: Nfred gao <fred.gao@intel.com>
Reviewed-by: NZhi Wang <zhi.a.wang@intel.com>
Signed-off-by: NZhi Wang <zhi.a.wang@intel.com>

In this patch, all the vGPU type related code will be merged into
same gvt file and the common interface will be exposed to both
XenGT and KvmGT.

v2:
- remove the useless mdev_* gvt_ops.
  add get_gvt_attr ops for MPT module.
  intel_gvt_{init,cleanup}_vgpu_type_groups are initialized in
  gvt part. (Wang, Zhi)
- set gvt_vgpu_type_groups[i] to NULL. (Zhang,Xiong)
Signed-off-by: Nfred gao <fred.gao@intel.com>
Reviewed-by: NZhi Wang <zhi.a.wang@intel.com>
Signed-off-by: NZhi Wang <zhi.a.wang@intel.com>

Move clean_workloads() into scheduler.c since it's not specific to
execlist.

v2:

- Remove clean_workloads in intel_vgpu_select_submission_ops. (Zhenyu)
Signed-off-by: NZhi Wang <zhi.a.wang@intel.com>

Introduce an generic API to reset vGPU virtual submission interface.
Signed-off-by: NZhi Wang <zhi.a.wang@intel.com>

Introduce vGPU submission ops to support easy switching submission mode
of one vGPU between different OSes.
Signed-off-by: NZhi Wang <zhi.a.wang@intel.com>

Now the function has been moved into scheduler.c. The extra declaration
is not necessary.
Signed-off-by: NZhi Wang <zhi.a.wang@intel.com>

Move common vGPU workload creation functions into scheduler.c since
they are not specific to execlist emulation.
Signed-off-by: NZhi Wang <zhi.a.wang@intel.com>

Move common workload preparation into prepare_workload() in scheduler.c,
as they are not specific to execlist emulation.
Signed-off-by: NZhi Wang <zhi.a.wang@intel.com>

Factor out prepare_workload() for the following re-factor.
Signed-off-by: NZhi Wang <zhi.a.wang@intel.com>

Factor out vGPU workload creation/destroy functions since they are not
specific to execlist emulation.
Signed-off-by: NZhi Wang <zhi.a.wang@intel.com>

It's better enable/disable and classify gvt debug info dynamically.
This patch change it to dyndbg so can be dynamically enable/disable
each item. All gvt log can be enabled by,
 $ echo 'file *gvt* +p' > /sys/kernel/debug/dynamic_debug/control
Signed-off-by: NShuo Liu <shuo.a.liu@intel.com>
Signed-off-by: NZhenyu Wang <zhenyuw@linux.intel.com>

An earlier fix changed the return type from find_bb_size however the
integer return is being assigned to a unsigned int so the -ve error
check will never be detected. Make bb_size an int to fix this.

Detected by CoverityScan CID#1456886 ("Unsigned compared against 0")

Fixes: 1e3197d6 ("drm/i915/gvt: Refine error handling for perform_bb_shadow")
Signed-off-by: NColin Ian King <colin.king@canonical.com>
Signed-off-by: NZhenyu Wang <zhenyuw@linux.intel.com>

When a scan error occurs in submit_context, this patch is to
decrease the mm ref count and free the workload struct before
the workload is abandoned.

v2:
- submit_context related code should be combined together. (Zhenyu)

v3:
- free all the unsubmitted workloads. (Zhenyu)

v4:
- refine the clean path. (Zhenyu)

v5:
- polish the title. (Zhenyu)
Signed-off-by: Nfred gao <fred.gao@intel.com>
Signed-off-by: NZhenyu Wang <zhenyuw@linux.intel.com>

When a scan error occurs in dispatch_workload, this patch is to
check the healthy state and free all the queued workloads before
the failsafe mode is entered.
Signed-off-by: Nfred gao <fred.gao@intel.com>
Signed-off-by: NZhenyu Wang <zhenyuw@linux.intel.com>

Generally, there are 3 types of errors during command scan: a) some
commands might be unknown with EBADRQC;  b) some cmd access invalid
address with EFAULT; c) some unexpected force nonpriv cmd with EPERM.
later the healthy state can be judged through the return error.

v2:
- remove some internal i915 errors rating.  (Zhenyu)

v3:
- the healthy state is judged through the internal defined return
  error. (Zhenyu)
- force non priv cmd error can be ignored. (Kevin)

v4:
- reuse standard defined errno instead of recreate, e.g EBADRQC for
  unknown cmd, EFAULT for invalid address, EPERM for nonpriv. (Zhenyu)

v5:
- remove some irrelevant code for the patch.
- fix typo of vgpu_is_vm_unhealthy. (Zhenyu)

v6:
- move the healthy check and failsafe code into another patch. (Zhenyu)

v7:
- polish title and commit message. (Zhenyu)
Signed-off-by: Nfred gao <fred.gao@intel.com>
Signed-off-by: NZhenyu Wang <zhenyuw@linux.intel.com>

Theoretically, the largest bulk of commands in the ring buffer of an
engine might be the first submission, which usually contains a lot
of commands to initialize the HW. After removing the initial allocation
of the ring scan buffer and let krealloc() do everything we need, we
still have a big chance to get the buffer of suitable size in the first
submission.

Tested on my SKL NUC.
Signed-off-by: NZhi Wang <zhi.a.wang@intel.com>

Move ring scan buffers into intel_vgpu_submission since they belongs to
a part of vGPU submission stuffs.
Signed-off-by: NZhi Wang <zhi.a.wang@intel.com>

"reserved" means reserve something from somewhere. Actually they are
buffers used by command scanner. Rename it to ring_scan_buffer.

v2:

- Remove the usage of an extra variable. (Zhenyu)

Fixes: 0a53bc07 ("drm/i915/gvt: Separate cmd scan from request allocation")
Signed-off-by: NZhi Wang <zhi.a.wang@intel.com>

The pointer points to the original memory can never take the return value
of krealloc().
Signed-off-by: NZhi Wang <zhi.a.wang@intel.com>