提交 · c4227e1dbacb46e2883b4d0f5c30663a1d958f7d · openeuler / Kernel

14 1月, 2022 40 次提交

KVM: selftests: Make sure kvm_create_max_vcpus test won't hit RLIMIT_NOFILE · c4227e1d

由 Vitaly Kuznetsov 提交于 1月 14, 2022

stable inclusion
from stable-v5.10.88
commit 8d0f56c2ed716d5db716893bda5e9250a9a7f2ee
bugzilla: 186058 https://gitee.com/openeuler/kernel/issues/I4QW6A

Reference: https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git/commit/?id=8d0f56c2ed716d5db716893bda5e9250a9a7f2ee

--------------------------------

[ Upstream commit 908fa88e ]

With the elevated 'KVM_CAP_MAX_VCPUS' value kvm_create_max_vcpus test
may hit RLIMIT_NOFILE limits:

 # ./kvm_create_max_vcpus
 KVM_CAP_MAX_VCPU_ID: 4096
 KVM_CAP_MAX_VCPUS: 1024
 Testing creating 1024 vCPUs, with IDs 0...1023.
 /dev/kvm not available (errno: 24), skipping test

Adjust RLIMIT_NOFILE limits to make sure KVM_CAP_MAX_VCPUS fds can be
opened. Note, raising hard limit ('rlim_max') requires CAP_SYS_RESOURCE
capability which is generally not needed to run kvm selftests (but without
raising the limit the test is doomed to fail anyway).
Signed-off-by: NVitaly Kuznetsov <vkuznets@redhat.com>
Message-Id: <20211123135953.667434-1-vkuznets@redhat.com>
[Skip the test if the hard limit can be raised. - Paolo]
Reviewed-by: NSean Christopherson <seanjc@google.com>
Tested-by: NSean Christopherson <seanjc@google.com>
Signed-off-by: NPaolo Bonzini <pbonzini@redhat.com>
Signed-off-by: NSasha Levin <sashal@kernel.org>
Signed-off-by: NChen Jun <chenjun102@huawei.com>
Signed-off-by: NZheng Zengkai <zhengzengkai@huawei.com>

c4227e1d

arm: ioremap: don't abuse pfn_valid() to check if pfn is in RAM · e044ac82

由 Mike Rapoport 提交于 1月 14, 2022

stable inclusion
from stable-v5.10.87
commit 8dd559d53b3b2de960ca1ec1359f5a9b4a12e181
bugzilla: 186049 https://gitee.com/openeuler/kernel/issues/I4QVYL

Reference: https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git/commit/?id=8dd559d53b3b2de960ca1ec1359f5a9b4a12e181

--------------------------------

commit 024591f9 upstream.
[ Upstream commit 024591f9 ]

The semantics of pfn_valid() is to check presence of the memory map for a
PFN and not whether a PFN is in RAM. The memory map may be present for a
hole in the physical memory and if such hole corresponds to an MMIO range,
__arm_ioremap_pfn_caller() will produce a WARN() and fail:

[    2.863406] WARNING: CPU: 0 PID: 1 at arch/arm/mm/ioremap.c:287 __arm_ioremap_pfn_caller+0xf0/0x1dc
[    2.864812] CPU: 0 PID: 1 Comm: swapper/0 Not tainted 5.13.0-09882-ga180bd1d #1
[    2.865263] Hardware name: Generic DT based system
[    2.865711] Backtrace:
[    2.866063] [<80b07e58>] (dump_backtrace) from [<80b080ac>] (show_stack+0x20/0x24)
[    2.866633]  r7:00000009 r6:0000011f r5:60000153 r4:80ddd1c0
[    2.866922] [<80b0808c>] (show_stack) from [<80b18df0>] (dump_stack_lvl+0x58/0x74)
[    2.867117] [<80b18d98>] (dump_stack_lvl) from [<80b18e20>] (dump_stack+0x14/0x1c)
[    2.867309]  r5:80118cac r4:80dc6774
[    2.867404] [<80b18e0c>] (dump_stack) from [<80122fcc>] (__warn+0xe4/0x150)
[    2.867583] [<80122ee8>] (__warn) from [<80b08850>] (warn_slowpath_fmt+0x88/0xc0)
[    2.867774]  r7:0000011f r6:80dc6774 r5:00000000 r4:814c4000
[    2.867917] [<80b087cc>] (warn_slowpath_fmt) from [<80118cac>] (__arm_ioremap_pfn_caller+0xf0/0x1dc)
[    2.868158]  r9:00000001 r8:9ef00000 r7:80e8b0d4 r6:0009ef00 r5:00000000 r4:00100000
[    2.868346] [<80118bbc>] (__arm_ioremap_pfn_caller) from [<80118df8>] (__arm_ioremap_caller+0x60/0x68)
[    2.868581]  r9:9ef00000 r8:821b6dc0 r7:00100000 r6:00000000 r5:815d1010 r4:80118d98
[    2.868761] [<80118d98>] (__arm_ioremap_caller) from [<80118fcc>] (ioremap+0x28/0x30)
[    2.868958] [<80118fa4>] (ioremap) from [<8062871c>] (__devm_ioremap_resource+0x154/0x1c8)
[    2.869169]  r5:815d1010 r4:814c5d2c
[    2.869263] [<806285c8>] (__devm_ioremap_resource) from [<8062899c>] (devm_ioremap_resource+0x14/0x18)
[    2.869495]  r9:9e9f57a0 r8:814c4000 r7:815d1000 r6:815d1010 r5:8177c078 r4:815cf400
[    2.869676] [<80628988>] (devm_ioremap_resource) from [<8091c6e4>] (fsi_master_acf_probe+0x1a8/0x5d8)
[    2.869909] [<8091c53c>] (fsi_master_acf_probe) from [<80723dbc>] (platform_probe+0x68/0xc8)
[    2.870124]  r9:80e9dadc r8:00000000 r7:815d1010 r6:810c1000 r5:815d1010 r4:00000000
[    2.870306] [<80723d54>] (platform_probe) from [<80721208>] (really_probe+0x1cc/0x470)
[    2.870512]  r7:815d1010 r6:810c1000 r5:00000000 r4:815d1010
[    2.870651] [<8072103c>] (really_probe) from [<807215cc>] (__driver_probe_device+0x120/0x1fc)
[    2.870872]  r7:815d1010 r6:810c1000 r5:810c1000 r4:815d1010
[    2.871013] [<807214ac>] (__driver_probe_device) from [<807216e8>] (driver_probe_device+0x40/0xd8)
[    2.871244]  r9:80e9dadc r8:00000000 r7:815d1010 r6:810c1000 r5:812feaa0 r4:812fe994
[    2.871428] [<807216a8>] (driver_probe_device) from [<80721a58>] (__driver_attach+0xa8/0x1d4)
[    2.871647]  r9:80e9dadc r8:00000000 r7:00000000 r6:810c1000 r5:815d1054 r4:815d1010
[    2.871830] [<807219b0>] (__driver_attach) from [<8071ee8c>] (bus_for_each_dev+0x88/0xc8)
[    2.872040]  r7:00000000 r6:814c4000 r5:807219b0 r4:810c1000
[    2.872194] [<8071ee04>] (bus_for_each_dev) from [<80722208>] (driver_attach+0x28/0x30)
[    2.872418]  r7:810a2aa0 r6:00000000 r5:821b6000 r4:810c1000
[    2.872570] [<807221e0>] (driver_attach) from [<8071f80c>] (bus_add_driver+0x114/0x200)
[    2.872788] [<8071f6f8>] (bus_add_driver) from [<80722ec4>] (driver_register+0x98/0x128)
[    2.873011]  r7:81011d0c r6:814c4000 r5:00000000 r4:810c1000
[    2.873167] [<80722e2c>] (driver_register) from [<80725240>] (__platform_driver_register+0x2c/0x34)
[    2.873408]  r5:814dcb80 r4:80f2a764
[    2.873513] [<80725214>] (__platform_driver_register) from [<80f2a784>] (fsi_master_acf_init+0x20/0x28)
[    2.873766] [<80f2a764>] (fsi_master_acf_init) from [<80f014a8>] (do_one_initcall+0x108/0x290)
[    2.874007] [<80f013a0>] (do_one_initcall) from [<80f01840>] (kernel_init_freeable+0x1ac/0x230)
[    2.874248]  r9:80e9dadc r8:80f3987c r7:80f3985c r6:00000007 r5:814dcb80 r4:80f627a4
[    2.874456] [<80f01694>] (kernel_init_freeable) from [<80b19f44>] (kernel_init+0x20/0x138)
[    2.874691]  r10:00000000 r9:00000000 r8:00000000 r7:00000000 r6:00000000 r5:80b19f24
[    2.874894]  r4:00000000
[    2.874977] [<80b19f24>] (kernel_init) from [<80100170>] (ret_from_fork+0x14/0x24)
[    2.875231] Exception stack(0x814c5fb0 to 0x814c5ff8)
[    2.875535] 5fa0:                                     00000000 00000000 00000000 00000000
[    2.875849] 5fc0: 00000000 00000000 00000000 00000000 00000000 00000000 00000000 00000000
[    2.876133] 5fe0: 00000000 00000000 00000000 00000000 00000013 00000000
[    2.876363]  r5:80b19f24 r4:00000000
[    2.876683] ---[ end trace b2f74b8536829970 ]---
[    2.876911] fsi-master-acf gpio-fsi: ioremap failed for resource [mem 0x9ef00000-0x9effffff]
[    2.877492] fsi-master-acf gpio-fsi: Error -12 mapping coldfire memory
[    2.877689] fsi-master-acf: probe of gpio-fsi failed with error -12

Use memblock_is_map_memory() instead of pfn_valid() to check if a PFN is in
RAM or not.
Reported-by: NGuenter Roeck <linux@roeck-us.net>
Fixes: a4d5613c ("arm: extend pfn_valid to take into account freed memory map alignment")
Signed-off-by: NMike Rapoport <rppt@linux.ibm.com>
Tested-by: NGuenter Roeck <linux@roeck-us.net>
Link: https://lore.kernel.org/lkml/20210630071211.21011-1-rppt@kernel.org/Signed-off-by: NMark-PK Tsai <mark-pk.tsai@mediatek.com>
Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: NChen Jun <chenjun102@huawei.com>
Signed-off-by: NZheng Zengkai <zhengzengkai@huawei.com>

e044ac82

arm: extend pfn_valid to take into account freed memory map alignment · 839ab291

由 Mike Rapoport 提交于 1月 14, 2022

stable inclusion
from stable-v5.10.87
commit 65c578935bcc26ddc04e6757b2c7be95bf235b31
bugzilla: 186049 https://gitee.com/openeuler/kernel/issues/I4QVYL

Reference: https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git/commit/?id=65c578935bcc26ddc04e6757b2c7be95bf235b31

--------------------------------

[ Upstream commit a4d5613c ]

When unused memory map is freed the preserved part of the memory map is
extended to match pageblock boundaries because lots of core mm
functionality relies on homogeneity of the memory map within pageblock
boundaries.

Since pfn_valid() is used to check whether there is a valid memory map
entry for a PFN, make it return true also for PFNs that have memory map
entries even if there is no actual memory populated there.
Signed-off-by: NMike Rapoport <rppt@linux.ibm.com>
Tested-by: NKefeng Wang <wangkefeng.wang@huawei.com>
Tested-by: NTony Lindgren <tony@atomide.com>
Link: https://lore.kernel.org/lkml/20210630071211.21011-1-rppt@kernel.org/Signed-off-by: NMark-PK Tsai <mark-pk.tsai@mediatek.com>
Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: NChen Jun <chenjun102@huawei.com>
Signed-off-by: NZheng Zengkai <zhengzengkai@huawei.com>

839ab291

memblock: align freed memory map on pageblock boundaries with SPARSEMEM · e0b47d82

由 Mike Rapoport 提交于 1月 14, 2022

stable inclusion
from stable-v5.10.87
commit 74551f13c62fed411ea47457a31bbfc160e5d3fb
bugzilla: 186049 https://gitee.com/openeuler/kernel/issues/I4QVYL

Reference: https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git/commit/?id=74551f13c62fed411ea47457a31bbfc160e5d3fb

--------------------------------

[ Upstream commit f921f53e ]

When CONFIG_SPARSEMEM=y the ranges of the memory map that are freed are not
aligned to the pageblock boundaries which breaks assumptions about
homogeneity of the memory map throughout core mm code.

Make sure that the freed memory map is always aligned on pageblock
boundaries regardless of the memory model selection.
Signed-off-by: NMike Rapoport <rppt@linux.ibm.com>
Tested-by: NTony Lindgren <tony@atomide.com>
Link: https://lore.kernel.org/lkml/20210630071211.21011-1-rppt@kernel.org/
[backport upstream modification in mm/memblock.c to arch/arm/mm/init.c]
Signed-off-by: NMark-PK Tsai <mark-pk.tsai@mediatek.com>
Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: NChen Jun <chenjun102@huawei.com>
Signed-off-by: NZheng Zengkai <zhengzengkai@huawei.com>

e0b47d82

memblock: free_unused_memmap: use pageblock units instead of MAX_ORDER · c5a8f13e

由 Mike Rapoport 提交于 1月 14, 2022

stable inclusion
from stable-v5.10.87
commit b4b54c7ba149ffa2dcb11b2a84ebf20189ff7f89
bugzilla: 186049 https://gitee.com/openeuler/kernel/issues/I4QVYL

Reference: https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git/commit/?id=b4b54c7ba149ffa2dcb11b2a84ebf20189ff7f89

--------------------------------

[ Upstream commit e2a86800 ]

The code that frees unused memory map uses rounds start and end of the
holes that are freed to MAX_ORDER_NR_PAGES to preserve continuity of the
memory map for MAX_ORDER regions.

Lots of core memory management functionality relies on homogeneity of the
memory map within each pageblock which size may differ from MAX_ORDER in
certain configurations.

Although currently, for the architectures that use free_unused_memmap(),
pageblock_order and MAX_ORDER are equivalent, it is cleaner to have common
notation thought mm code.

Replace MAX_ORDER_NR_PAGES with pageblock_nr_pages and update the comments
to make it more clear why the alignment to pageblock boundaries is
required.
Signed-off-by: NMike Rapoport <rppt@linux.ibm.com>
Tested-by: NTony Lindgren <tony@atomide.com>
Link: https://lore.kernel.org/lkml/20210630071211.21011-1-rppt@kernel.org/
[backport upstream modification in mm/memblock.c to arch/arm/mm/init.c]
Signed-off-by: NMark-PK Tsai <mark-pk.tsai@mediatek.com>
Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: NChen Jun <chenjun102@huawei.com>
Signed-off-by: NZheng Zengkai <zhengzengkai@huawei.com>

c5a8f13e

perf intel-pt: Fix error timestamp setting on the decoder error path · 1ee405fb

由 Adrian Hunter 提交于 1月 14, 2022

stable inclusion
from stable-v5.10.87
commit b6a1cbd187fc7addddcb9c669f7362dec4d54595
bugzilla: 186049 https://gitee.com/openeuler/kernel/issues/I4QVYL

Reference: https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git/commit/?id=b6a1cbd187fc7addddcb9c669f7362dec4d54595

--------------------------------

commit 6665b8e4 upstream.

An error timestamp shows the last known timestamp for the queue, but this
is not updated on the error path. Fix by setting it.

Fixes: f4aa0819 ("perf tools: Add Intel PT decoder")
Signed-off-by: NAdrian Hunter <adrian.hunter@intel.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: stable@vger.kernel.org # v5.15+
Link: https://lore.kernel.org/r/20211210162303.2288710-8-adrian.hunter@intel.comSigned-off-by: NArnaldo Carvalho de Melo <acme@redhat.com>
[Adrian: Backport to v5.10]
Signed-off-by: NAdrian Hunter <adrian.hunter@intel.com>
Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: NChen Jun <chenjun102@huawei.com>
Signed-off-by: NZheng Zengkai <zhengzengkai@huawei.com>

1ee405fb

perf intel-pt: Fix missing 'instruction' events with 'q' option · 4b31a9b8

由 Adrian Hunter 提交于 1月 14, 2022

stable inclusion
from stable-v5.10.87
commit 0612aa02c2c8e5c0bb4a257c29ad7aaacf6876ba
bugzilla: 186049 https://gitee.com/openeuler/kernel/issues/I4QVYL

Reference: https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git/commit/?id=0612aa02c2c8e5c0bb4a257c29ad7aaacf6876ba

--------------------------------

commit a882cc94 upstream.

FUP packets contain IP information, which makes them also an 'instruction'
event in 'hop' mode i.e. the itrace 'q' option.  That wasn't happening, so
restructure the logic so that FUP events are added along with appropriate
'instruction' and 'branch' events.

Fixes: 7c1b16ba ("perf intel-pt: Add support for decoding FUP/TIP only")
Signed-off-by: NAdrian Hunter <adrian.hunter@intel.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: stable@vger.kernel.org # v5.15+
Link: https://lore.kernel.org/r/20211210162303.2288710-7-adrian.hunter@intel.comSigned-off-by: NArnaldo Carvalho de Melo <acme@redhat.com>
[Adrian: Backport to v5.10]
Signed-off-by: NAdrian Hunter <adrian.hunter@intel.com>
Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: NChen Jun <chenjun102@huawei.com>
Signed-off-by: NZheng Zengkai <zhengzengkai@huawei.com>

4b31a9b8

perf intel-pt: Fix next 'err' value, walking trace · 42d0d632

由 Adrian Hunter 提交于 1月 14, 2022

stable inclusion
from stable-v5.10.87
commit 71c795028b31946c7be3392dfa5302011acfa44e
bugzilla: 186049 https://gitee.com/openeuler/kernel/issues/I4QVYL

Reference: https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git/commit/?id=71c795028b31946c7be3392dfa5302011acfa44e

--------------------------------

commit a32e6c5d upstream.

Code after label 'next:' in intel_pt_walk_trace() assumes 'err' is zero,
but it may not be, if arrived at via a 'goto'. Ensure it is zero.

Fixes: 7c1b16ba ("perf intel-pt: Add support for decoding FUP/TIP only")
Signed-off-by: NAdrian Hunter <adrian.hunter@intel.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: stable@vger.kernel.org # v5.15+
Link: https://lore.kernel.org/r/20211210162303.2288710-6-adrian.hunter@intel.comSigned-off-by: NArnaldo Carvalho de Melo <acme@redhat.com>
[Adrian: Backport to v5.10]
Signed-off-by: NAdrian Hunter <adrian.hunter@intel.com>
Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: NChen Jun <chenjun102@huawei.com>
Signed-off-by: NZheng Zengkai <zhengzengkai@huawei.com>

42d0d632

perf intel-pt: Fix state setting when receiving overflow (OVF) packet · 0adecae3

由 Adrian Hunter 提交于 1月 14, 2022

stable inclusion
from stable-v5.10.87
commit 02681dd1780a3aeb31381f5f01b9f9b14909eb57
bugzilla: 186049 https://gitee.com/openeuler/kernel/issues/I4QVYL

Reference: https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git/commit/?id=02681dd1780a3aeb31381f5f01b9f9b14909eb57

--------------------------------

commit c79ee2b2 upstream.

An overflow (OVF packet) is treated as an error because it represents a
loss of trace data, but there is no loss of synchronization, so the packet
state should be INTEL_PT_STATE_IN_SYNC not INTEL_PT_STATE_ERR_RESYNC.

To support that, some additional variables must be reset, and the FUP
packet that may follow OVF is treated as an FUP event.

Fixes: f4aa0819 ("perf tools: Add Intel PT decoder")
Signed-off-by: NAdrian Hunter <adrian.hunter@intel.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: stable@vger.kernel.org # v5.15+
Link: https://lore.kernel.org/r/20211210162303.2288710-5-adrian.hunter@intel.comSigned-off-by: NArnaldo Carvalho de Melo <acme@redhat.com>
[Adrian: Backport to v5.10]
Signed-off-by: NAdrian Hunter <adrian.hunter@intel.com>
Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: NChen Jun <chenjun102@huawei.com>
Signed-off-by: NZheng Zengkai <zhengzengkai@huawei.com>

0adecae3

perf intel-pt: Fix intel_pt_fup_event() assumptions about setting state type · 116ba62c

由 Adrian Hunter 提交于 1月 14, 2022

stable inclusion
from stable-v5.10.87
commit cbed09b44ce0048e12d9981a9f33b86fe42a6fb6
bugzilla: 186049 https://gitee.com/openeuler/kernel/issues/I4QVYL

Reference: https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git/commit/?id=cbed09b44ce0048e12d9981a9f33b86fe42a6fb6

--------------------------------

commit 4c761d80 upstream.

intel_pt_fup_event() assumes it can overwrite the state type if there has
been an FUP event, but this is an unnecessary and unexpected constraint on
callers.

Fix by touching only the state type flags that are affected by an FUP
event.

Fixes: a472e65f ("perf intel-pt: Add decoder support for ptwrite and power event packets")
Signed-off-by: NAdrian Hunter <adrian.hunter@intel.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: stable@vger.kernel.org # v5.15+
Link: https://lore.kernel.org/r/20211210162303.2288710-4-adrian.hunter@intel.comSigned-off-by: NArnaldo Carvalho de Melo <acme@redhat.com>
[Adrian: Backport to v5.10]
Signed-off-by: NAdrian Hunter <adrian.hunter@intel.com>
Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: NChen Jun <chenjun102@huawei.com>
Signed-off-by: NZheng Zengkai <zhengzengkai@huawei.com>

116ba62c

perf intel-pt: Fix sync state when a PSB (synchronization) packet is found · 6a4a0f70

由 Adrian Hunter 提交于 1月 14, 2022

stable inclusion
from stable-v5.10.87
commit 3bb7fd4be8c47a4c562dfeac1ef62ad85c9e3149
bugzilla: 186049 https://gitee.com/openeuler/kernel/issues/I4QVYL

Reference: https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git/commit/?id=3bb7fd4be8c47a4c562dfeac1ef62ad85c9e3149

--------------------------------

commit ad106a26 upstream.

When syncing, it may be that branch packet generation is not enabled at
that point, in which case there will not immediately be a control-flow
packet, so some packets before a control flow packet turns up, get
ignored.  However, the decoder is in sync as soon as a PSB is found, so
the state should be set accordingly.

Fixes: f4aa0819 ("perf tools: Add Intel PT decoder")
Signed-off-by: NAdrian Hunter <adrian.hunter@intel.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: stable@vger.kernel.org # v5.15+
Link: https://lore.kernel.org/r/20211210162303.2288710-3-adrian.hunter@intel.comSigned-off-by: NArnaldo Carvalho de Melo <acme@redhat.com>
[Adrian: Backport to v5.10]
Signed-off-by: NAdrian Hunter <adrian.hunter@intel.com>
Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: NChen Jun <chenjun102@huawei.com>
Signed-off-by: NZheng Zengkai <zhengzengkai@huawei.com>

6a4a0f70

perf intel-pt: Fix some PGE (packet generation enable/control flow packets) usage · 340ce555

由 Adrian Hunter 提交于 1月 14, 2022

stable inclusion
from stable-v5.10.87
commit 731ff78841384877c7b36f78c8aafd60ed70ad3a
bugzilla: 186049 https://gitee.com/openeuler/kernel/issues/I4QVYL

Reference: https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git/commit/?id=731ff78841384877c7b36f78c8aafd60ed70ad3a

--------------------------------

commit 057ae59f upstream.

Packet generation enable (PGE) refers to whether control flow (COFI)
packets are being produced.

PGE may be false even when branch-tracing is enabled, due to being
out-of-context, or outside a filter address range.  Fix some missing PGE
usage.

Fixes: 7c1b16ba ("perf intel-pt: Add support for decoding FUP/TIP only")
Fixes: 83959817 ("perf intel-pt: Allow decoding with branch tracing disabled")
Signed-off-by: NAdrian Hunter <adrian.hunter@intel.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: stable@vger.kernel.org # v5.15+
Link: https://lore.kernel.org/r/20211210162303.2288710-2-adrian.hunter@intel.comSigned-off-by: NArnaldo Carvalho de Melo <acme@redhat.com>
[Adrian: Backport to v5.10]
Signed-off-by: NAdrian Hunter <adrian.hunter@intel.com>
Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: NChen Jun <chenjun102@huawei.com>
Signed-off-by: NZheng Zengkai <zhengzengkai@huawei.com>

340ce555

perf inject: Fix itrace space allowed for new attributes · f50e3516

由 Adrian Hunter 提交于 1月 14, 2022

stable inclusion
from stable-v5.10.87
commit b23f9252a41d33d10792c32a5e54724b1bc9a7fc
bugzilla: 186049 https://gitee.com/openeuler/kernel/issues/I4QVYL

Reference: https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git/commit/?id=b23f9252a41d33d10792c32a5e54724b1bc9a7fc

--------------------------------

commit c29d9792 upstream.

The space allowed for new attributes can be too small if existing header
information is large. That can happen, for example, if there are very
many CPUs, due to having an event ID per CPU per event being stored in the
header information.

Fix by adding the existing header.data_offset. Also increase the extra
space allowed to 8KiB and align to a 4KiB boundary for neatness.
Signed-off-by: NAdrian Hunter <adrian.hunter@intel.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Link: http://lore.kernel.org/lkml/20211125071457.2066863-1-adrian.hunter@intel.comSigned-off-by: NArnaldo Carvalho de Melo <acme@redhat.com>
[Adrian: Backport to v5.10]
Signed-off-by: NAdrian Hunter <adrian.hunter@intel.com>
Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: NChen Jun <chenjun102@huawei.com>
Signed-off-by: NZheng Zengkai <zhengzengkai@huawei.com>

f50e3516

ethtool: do not perform operations on net devices being unregistered · d4315eb4

由 Antoine Tenart 提交于 1月 14, 2022

stable inclusion
from stable-v5.10.87
commit 7c26da3be1e9843a15b5318f90db8a564479d2ac
bugzilla: 186049 https://gitee.com/openeuler/kernel/issues/I4QVYL

Reference: https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git/commit/?id=7c26da3be1e9843a15b5318f90db8a564479d2ac

--------------------------------

commit dde91ccf upstream.

There is a short period between a net device starts to be unregistered
and when it is actually gone. In that time frame ethtool operations
could still be performed, which might end up in unwanted or undefined
behaviours[1].

Do not allow ethtool operations after a net device starts its
unregistration. This patch targets the netlink part as the ioctl one
isn't affected: the reference to the net device is taken and the
operation is executed within an rtnl lock section and the net device
won't be found after unregister.

[1] For example adding Tx queues after unregister ends up in NULL
    pointer exceptions and UaFs, such as:

      BUG: KASAN: use-after-free in kobject_get+0x14/0x90
      Read of size 1 at addr ffff88801961248c by task ethtool/755

      CPU: 0 PID: 755 Comm: ethtool Not tainted 5.15.0-rc6+ #778
      Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.14.0-4.fc34 04/014
      Call Trace:
       dump_stack_lvl+0x57/0x72
       print_address_description.constprop.0+0x1f/0x140
       kasan_report.cold+0x7f/0x11b
       kobject_get+0x14/0x90
       kobject_add_internal+0x3d1/0x450
       kobject_init_and_add+0xba/0xf0
       netdev_queue_update_kobjects+0xcf/0x200
       netif_set_real_num_tx_queues+0xb4/0x310
       veth_set_channels+0x1c3/0x550
       ethnl_set_channels+0x524/0x610

Fixes: 041b1c5d ("ethtool: helper functions for netlink interface")
Suggested-by: NJakub Kicinski <kuba@kernel.org>
Signed-off-by: NAntoine Tenart <atenart@kernel.org>
Link: https://lore.kernel.org/r/20211203101318.435618-1-atenart@kernel.orgSigned-off-by: NJakub Kicinski <kuba@kernel.org>
Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: NChen Jun <chenjun102@huawei.com>
Signed-off-by: NZheng Zengkai <zhengzengkai@huawei.com>

d4315eb4

hwmon: (dell-smm) Fix warning on /proc/i8k creation error · 4edf7a38

由 Armin Wolf 提交于 1月 14, 2022

stable inclusion
from stable-v5.10.87
commit 6992d8c215c872c208b895fba1e13e07c8c94a83
bugzilla: 186049 https://gitee.com/openeuler/kernel/issues/I4QVYL

Reference: https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git/commit/?id=6992d8c215c872c208b895fba1e13e07c8c94a83

--------------------------------

commit dbd3e6ea upstream.

The removal function is called regardless of whether
/proc/i8k was created successfully or not, the later
causing a WARN() on module removal.
Fix that by only registering the removal function
if /proc/i8k was created successfully.

Tested on a Inspiron 3505.

Fixes: 039ae585 ("hwmon: Allow to compile dell-smm-hwmon driver without /proc/i8k")
Signed-off-by: NArmin Wolf <W_Armin@gmx.de>
Acked-by: NPali Rohár <pali@kernel.org>
Link: https://lore.kernel.org/r/20211112171440.59006-1-W_Armin@gmx.deSigned-off-by: NGuenter Roeck <linux@roeck-us.net>
Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: NChen Jun <chenjun102@huawei.com>
Signed-off-by: NZheng Zengkai <zhengzengkai@huawei.com>

4edf7a38

fuse: make sure reclaim doesn't write the inode · f562783e

由 Miklos Szeredi 提交于 1月 14, 2022

stable inclusion
from stable-v5.10.87
commit c31470a30c0d8cf406cc71385d8c97dfd1a84f3f
bugzilla: 186049 https://gitee.com/openeuler/kernel/issues/I4QVYL

Reference: https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git/commit/?id=c31470a30c0d8cf406cc71385d8c97dfd1a84f3f

--------------------------------

commit 5c791fe1 upstream.

In writeback cache mode mtime/ctime updates are cached, and flushed to the
server using the ->write_inode() callback.

Closing the file will result in a dirty inode being immediately written,
but in other cases the inode can remain dirty after all references are
dropped.  This result in the inode being written back from reclaim, which
can deadlock on a regular allocation while the request is being served.

The usual mechanisms (GFP_NOFS/PF_MEMALLOC*) don't work for FUSE, because
serving a request involves unrelated userspace process(es).

Instead do the same as for dirty pages: make sure the inode is written
before the last reference is gone.

 - fallocate(2)/copy_file_range(2): these call file_update_time() or
   file_modified(), so flush the inode before returning from the call

 - unlink(2), link(2) and rename(2): these call fuse_update_ctime(), so
   flush the ctime directly from this helper
Reported-by: Nchenguanyou <chenguanyou@xiaomi.com>
Signed-off-by: NMiklos Szeredi <mszeredi@redhat.com>
Cc: Ed Tsai <ed.tsai@mediatek.com>
Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: NChen Jun <chenjun102@huawei.com>
Signed-off-by: NZheng Zengkai <zhengzengkai@huawei.com>

f562783e

bpf: Fix integer overflow in argument calculation for bpf_map_area_alloc · d4ddcc27

由 Bui Quang Minh 提交于 1月 14, 2022

stable inclusion
from stable-v5.10.87
commit 613725436e69fc3ccdf39f827bb274f999288dba
bugzilla: 186049 https://gitee.com/openeuler/kernel/issues/I4QVYL

Reference: https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git/commit/?id=613725436e69fc3ccdf39f827bb274f999288dba

--------------------------------

commit 7dd5d437 upstream.

In 32-bit architecture, the result of sizeof() is a 32-bit integer so
the expression becomes the multiplication between 2 32-bit integer which
can potentially leads to integer overflow. As a result,
bpf_map_area_alloc() allocates less memory than needed.

Fix this by casting 1 operand to u64.

Fixes: 0d2c4f96 ("bpf: Eliminate rlimit-based memory accounting for sockmap and sockhash maps")
Fixes: 99c51064 ("devmap: Use bpf_map_area_alloc() for allocating hash buckets")
Fixes: 546ac1ff ("bpf: add devmap, a map for storing net device references")
Signed-off-by: NBui Quang Minh <minhquangbui99@gmail.com>
Signed-off-by: NAlexei Starovoitov <ast@kernel.org>
Link: https://lore.kernel.org/bpf/20210613143440.71975-1-minhquangbui99@gmail.comSigned-off-by: NConnor O'Brien <connoro@google.com>
Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: NChen Jun <chenjun102@huawei.com>
Signed-off-by: NZheng Zengkai <zhengzengkai@huawei.com>

d4ddcc27

staging: most: dim2: use device release method · 7f92408c

由 Nikita Yushchenko 提交于 1月 14, 2022

stable inclusion
from stable-v5.10.87
commit 9099f3512678596de7200bf748294b5e757d9a63
bugzilla: 186049 https://gitee.com/openeuler/kernel/issues/I4QVYL

Reference: https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git/commit/?id=9099f3512678596de7200bf748294b5e757d9a63

--------------------------------

commit d445aa40 upstream.

Commit 723de0f9 ("staging: most: remove device from interface
structure") moved registration of driver-provided struct device to
the most subsystem. This updated dim2 driver as well.

However, struct device passed to register_device() becomes refcounted,
and must not be explicitly deallocated, but must provide release method
instead. Which is incompatible with managing it via devres.

This patch makes the device structure allocated without devres, adds
device release method, and moves device destruction there.

Fixes: 723de0f9 ("staging: most: remove device from interface structure")
Signed-off-by: NNikita Yushchenko <nikita.yoush@cogentembedded.com>
Link: https://lore.kernel.org/r/20211005143448.8660-2-nikita.yoush@cogentembedded.comSigned-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: NChen Jun <chenjun102@huawei.com>
Signed-off-by: NZheng Zengkai <zhengzengkai@huawei.com>

7f92408c

KVM: x86: Ignore sparse banks size for an "all CPUs", non-sparse IPI req · d74c337c

由 Sean Christopherson 提交于 1月 14, 2022

stable inclusion
from stable-v5.10.87
commit ac76adc87a7865497171a139af42615659ee8d65
bugzilla: 186049 https://gitee.com/openeuler/kernel/issues/I4QVYL

Reference: https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git/commit/?id=ac76adc87a7865497171a139af42615659ee8d65

--------------------------------

commit 3244867a upstream.

Do not bail early if there are no bits set in the sparse banks for a
non-sparse, a.k.a. "all CPUs", IPI request.  Per the Hyper-V spec, it is
legal to have a variable length of '0', e.g. VP_SET's BankContents in
this case, if the request can be serviced without the extra info.

  It is possible that for a given invocation of a hypercall that does
  accept variable sized input headers that all the header input fits
  entirely within the fixed size header. In such cases the variable sized
  input header is zero-sized and the corresponding bits in the hypercall
  input should be set to zero.

Bailing early results in KVM failing to send IPIs to all CPUs as expected
by the guest.

Fixes: 214ff83d ("KVM: x86: hyperv: implement PV IPI send hypercalls")
Cc: stable@vger.kernel.org
Signed-off-by: NSean Christopherson <seanjc@google.com>
Reviewed-by: NVitaly Kuznetsov <vkuznets@redhat.com>
Message-Id: <20211207220926.718794-2-seanjc@google.com>
Signed-off-by: NPaolo Bonzini <pbonzini@redhat.com>
Signed-off-by: NVitaly Kuznetsov <vkuznets@redhat.com>
Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: NChen Jun <chenjun102@huawei.com>
Signed-off-by: NZheng Zengkai <zhengzengkai@huawei.com>

d74c337c

tracing: Fix a kmemleak false positive in tracing_map · 0f004f41

由 Chen Jun 提交于 1月 14, 2022

stable inclusion
from stable-v5.10.87
commit 6f0d9d3e74dc30293eab77ace28d8bd8cd66213d
bugzilla: 186049 https://gitee.com/openeuler/kernel/issues/I4QVYL

Reference: https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git/commit/?id=6f0d9d3e74dc30293eab77ace28d8bd8cd66213d

--------------------------------

[ Upstream commit f25667e5 ]

Doing the command:
  echo 'hist:key=common_pid.execname,common_timestamp' > /sys/kernel/debug/tracing/events/xxx/trigger

Triggers many kmemleak reports:

unreferenced object 0xffff0000c7ea4980 (size 128):
  comm "bash", pid 338, jiffies 4294912626 (age 9339.324s)
  hex dump (first 32 bytes):
    00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00  ................
    00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00  ................
  backtrace:
    [<00000000f3469921>] kmem_cache_alloc_trace+0x4c0/0x6f0
    [<0000000054ca40c3>] hist_trigger_elt_data_alloc+0x140/0x178
    [<00000000633bd154>] tracing_map_init+0x1f8/0x268
    [<000000007e814ab9>] event_hist_trigger_func+0xca0/0x1ad0
    [<00000000bf8520ed>] trigger_process_regex+0xd4/0x128
    [<00000000f549355a>] event_trigger_write+0x7c/0x120
    [<00000000b80f898d>] vfs_write+0xc4/0x380
    [<00000000823e1055>] ksys_write+0x74/0xf8
    [<000000008a9374aa>] __arm64_sys_write+0x24/0x30
    [<0000000087124017>] do_el0_svc+0x88/0x1c0
    [<00000000efd0dcd1>] el0_svc+0x1c/0x28
    [<00000000dbfba9b3>] el0_sync_handler+0x88/0xc0
    [<00000000e7399680>] el0_sync+0x148/0x180
unreferenced object 0xffff0000c7ea4980 (size 128):
  comm "bash", pid 338, jiffies 4294912626 (age 9339.324s)
  hex dump (first 32 bytes):
    00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00  ................
    00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00  ................
  backtrace:
    [<00000000f3469921>] kmem_cache_alloc_trace+0x4c0/0x6f0
    [<0000000054ca40c3>] hist_trigger_elt_data_alloc+0x140/0x178
    [<00000000633bd154>] tracing_map_init+0x1f8/0x268
    [<000000007e814ab9>] event_hist_trigger_func+0xca0/0x1ad0
    [<00000000bf8520ed>] trigger_process_regex+0xd4/0x128
    [<00000000f549355a>] event_trigger_write+0x7c/0x120
    [<00000000b80f898d>] vfs_write+0xc4/0x380
    [<00000000823e1055>] ksys_write+0x74/0xf8
    [<000000008a9374aa>] __arm64_sys_write+0x24/0x30
    [<0000000087124017>] do_el0_svc+0x88/0x1c0
    [<00000000efd0dcd1>] el0_svc+0x1c/0x28
    [<00000000dbfba9b3>] el0_sync_handler+0x88/0xc0
    [<00000000e7399680>] el0_sync+0x148/0x180

The reason is elts->pages[i] is alloced by get_zeroed_page.
and kmemleak will not scan the area alloced by get_zeroed_page.
The address stored in elts->pages will be regarded as leaked.

That is, the elts->pages[i] will have pointers loaded onto it as well, and
without telling kmemleak about it, those pointers will look like memory
without a reference.

To fix this, call kmemleak_alloc to tell kmemleak to scan elts->pages[i]

Link: https://lkml.kernel.org/r/20211124140801.87121-1-chenjun102@huawei.comSigned-off-by: NChen Jun <chenjun102@huawei.com>
Signed-off-by: NSteven Rostedt (VMware) <rostedt@goodmis.org>
Signed-off-by: NSasha Levin <sashal@kernel.org>
Signed-off-by: NChen Jun <chenjun102@huawei.com>
Signed-off-by: NZheng Zengkai <zhengzengkai@huawei.com>

0f004f41

drm/amd/display: add connector type check for CRC source set · 0e7acb4c

由 Perry Yuan 提交于 1月 14, 2022

stable inclusion
from stable-v5.10.87
commit f35f7f04aa80587bfe00c5e679df054918e79a63
bugzilla: 186049 https://gitee.com/openeuler/kernel/issues/I4QVYL

Reference: https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git/commit/?id=f35f7f04aa80587bfe00c5e679df054918e79a63

--------------------------------

[ Upstream commit 2da34b7b ]

[Why]
IGT bypass test will set crc source as DPRX,and display DM didn`t check
connection type, it run the test on the HDMI connector ,then the kernel
will be crashed because aux->transfer is set null for HDMI connection.
This patch will skip the invalid connection test and fix kernel crash issue.

[How]
Check the connector type while setting the pipe crc source as DPRX or
auto,if the type is not DP or eDP, the crtc crc source will not be set
and report error code to IGT test,IGT will show the this subtest as no
valid crtc/connector combinations found.

116.779714] [IGT] amd_bypass: starting subtest 8bpc-bypass-mode
[ 117.730996] BUG: kernel NULL pointer dereference, address: 0000000000000000
[ 117.731001] #PF: supervisor instruction fetch in kernel mode
[ 117.731003] #PF: error_code(0x0010) - not-present page
[ 117.731004] PGD 0 P4D 0
[ 117.731006] Oops: 0010 [#1] SMP NOPTI
[ 117.731009] CPU: 11 PID: 2428 Comm: amd_bypass Tainted: G OE 5.11.0-34-generic #36~20.04.1-Ubuntu
[ 117.731011] Hardware name: AMD CZN/, BIOS AB.FD 09/07/2021
[ 117.731012] RIP: 0010:0x0
[ 117.731015] Code: Unable to access opcode bytes at RIP 0xffffffffffffffd6.
[ 117.731016] RSP: 0018:ffffa8d64225bab8 EFLAGS: 00010246
[ 117.731017] RAX: 0000000000000000 RBX: 0000000000000020 RCX: ffffa8d64225bb5e
[ 117.731018] RDX: ffff93151d921880 RSI: ffffa8d64225bac8 RDI: ffff931511a1a9d8
[ 117.731022] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
[ 117.731023] CR2: ffffffffffffffd6 CR3: 000000010d5a4000 CR4: 0000000000750ee0
[ 117.731023] PKRU: 55555554
[ 117.731024] Call Trace:
[ 117.731027] drm_dp_dpcd_access+0x72/0x110 [drm_kms_helper]
[ 117.731036] drm_dp_dpcd_read+0xb7/0xf0 [drm_kms_helper]
[ 117.731040] drm_dp_start_crc+0x38/0xb0 [drm_kms_helper]
[ 117.731047] amdgpu_dm_crtc_set_crc_source+0x1ae/0x3e0 [amdgpu]
[ 117.731149] crtc_crc_open+0x174/0x220 [drm]
[ 117.731162] full_proxy_open+0x168/0x1f0
[ 117.731165] ? open_proxy_open+0x100/0x100

BugLink: https://gitlab.freedesktop.org/drm/amd/-/issues/1546Reviewed-by: NHarry Wentland <harry.wentland@amd.com>
Reviewed-by: NRodrigo Siqueira <Rodrigo.Siqueira@amd.com>
Signed-off-by: NPerry Yuan <Perry.Yuan@amd.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>
Signed-off-by: NSasha Levin <sashal@kernel.org>
Signed-off-by: NChen Jun <chenjun102@huawei.com>
Signed-off-by: NZheng Zengkai <zhengzengkai@huawei.com>

0e7acb4c

drm/amd/display: Fix for the no Audio bug with Tiled Displays · 0ff33400

由 Mustapha Ghaddar 提交于 1月 14, 2022

stable inclusion
from stable-v5.10.87
commit dd3cea3425226565c959a1a6b1a1cce2e3394713
bugzilla: 186049 https://gitee.com/openeuler/kernel/issues/I4QVYL

Reference: https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git/commit/?id=dd3cea3425226565c959a1a6b1a1cce2e3394713

--------------------------------

[ Upstream commit 5ceaebcd ]

[WHY]
It seems like after a series of plug/unplugs we end up in a situation
where tiled display doesnt support Audio.

[HOW]
The issue seems to be related to when we check streams changed after an
HPD, we should be checking the audio_struct as well to see if any of its
values changed.
Reviewed-by: NJun Lei <Jun.Lei@amd.com>
Acked-by: NBhawanpreet Lakha <Bhawanpreet.Lakha@amd.com>
Signed-off-by: NMustapha Ghaddar <mustapha.ghaddar@amd.com>
Tested-by: NDaniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>
Signed-off-by: NSasha Levin <sashal@kernel.org>
Signed-off-by: NChen Jun <chenjun102@huawei.com>
Signed-off-by: NZheng Zengkai <zhengzengkai@huawei.com>

0ff33400

net: netlink: af_netlink: Prevent empty skb by adding a check on len. · e8b75623

由 Harshit Mogalapalli 提交于 1月 14, 2022

stable inclusion
from stable-v5.10.87
commit dadce61247c6230489527cc5e343b6002d1114c5
bugzilla: 186049 https://gitee.com/openeuler/kernel/issues/I4QVYL

Reference: https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git/commit/?id=dadce61247c6230489527cc5e343b6002d1114c5

--------------------------------

[ Upstream commit f123cffd ]

Adding a check on len parameter to avoid empty skb. This prevents a
division error in netem_enqueue function which is caused when skb->len=0
and skb->data_len=0 in the randomized corruption step as shown below.

skb->data[prandom_u32() % skb_headlen(skb)] ^= 1<<(prandom_u32() % 8);

Crash Report:
[  343.170349] netdevsim netdevsim0 netdevsim3: set [1, 0] type 2 family
0 port 6081 - 0
[  343.216110] netem: version 1.3
[  343.235841] divide error: 0000 [#1] PREEMPT SMP KASAN NOPTI
[  343.236680] CPU: 3 PID: 4288 Comm: reproducer Not tainted 5.16.0-rc1+
[  343.237569] Hardware name: QEMU Standard PC (i440FX + PIIX, 1996),
BIOS 1.11.0-2.el7 04/01/2014
[  343.238707] RIP: 0010:netem_enqueue+0x1590/0x33c0 [sch_netem]
[  343.239499] Code: 89 85 58 ff ff ff e8 5f 5d e9 d3 48 8b b5 48 ff ff
ff 8b 8d 50 ff ff ff 8b 85 58 ff ff ff 48 8b bd 70 ff ff ff 31 d2 2b 4f
74 <f7> f1 48 b8 00 00 00 00 00 fc ff df 49 01 d5 4c 89 e9 48 c1 e9 03
[  343.241883] RSP: 0018:ffff88800bcd7368 EFLAGS: 00010246
[  343.242589] RAX: 00000000ba7c0a9c RBX: 0000000000000001 RCX:
0000000000000000
[  343.243542] RDX: 0000000000000000 RSI: ffff88800f8edb10 RDI:
ffff88800f8eda40
[  343.244474] RBP: ffff88800bcd7458 R08: 0000000000000000 R09:
ffffffff94fb8445
[  343.245403] R10: ffffffff94fb8336 R11: ffffffff94fb8445 R12:
0000000000000000
[  343.246355] R13: ffff88800a5a7000 R14: ffff88800a5b5800 R15:
0000000000000020
[  343.247291] FS:  00007fdde2bd7700(0000) GS:ffff888109780000(0000)
knlGS:0000000000000000
[  343.248350] CS:  0010 DS: 0000 ES: 0000 CR0: 0000000080050033
[  343.249120] CR2: 00000000200000c0 CR3: 000000000ef4c000 CR4:
00000000000006e0
[  343.250076] Call Trace:
[  343.250423]  <TASK>
[  343.250713]  ? memcpy+0x4d/0x60
[  343.251162]  ? netem_init+0xa0/0xa0 [sch_netem]
[  343.251795]  ? __sanitizer_cov_trace_pc+0x21/0x60
[  343.252443]  netem_enqueue+0xe28/0x33c0 [sch_netem]
[  343.253102]  ? stack_trace_save+0x87/0xb0
[  343.253655]  ? filter_irq_stacks+0xb0/0xb0
[  343.254220]  ? netem_init+0xa0/0xa0 [sch_netem]
[  343.254837]  ? __kasan_check_write+0x14/0x20
[  343.255418]  ? _raw_spin_lock+0x88/0xd6
[  343.255953]  dev_qdisc_enqueue+0x50/0x180
[  343.256508]  __dev_queue_xmit+0x1a7e/0x3090
[  343.257083]  ? netdev_core_pick_tx+0x300/0x300
[  343.257690]  ? check_kcov_mode+0x10/0x40
[  343.258219]  ? _raw_spin_unlock_irqrestore+0x29/0x40
[  343.258899]  ? __kasan_init_slab_obj+0x24/0x30
[  343.259529]  ? setup_object.isra.71+0x23/0x90
[  343.260121]  ? new_slab+0x26e/0x4b0
[  343.260609]  ? kasan_poison+0x3a/0x50
[  343.261118]  ? kasan_unpoison+0x28/0x50
[  343.261637]  ? __kasan_slab_alloc+0x71/0x90
[  343.262214]  ? memcpy+0x4d/0x60
[  343.262674]  ? write_comp_data+0x2f/0x90
[  343.263209]  ? __kasan_check_write+0x14/0x20
[  343.263802]  ? __skb_clone+0x5d6/0x840
[  343.264329]  ? __sanitizer_cov_trace_pc+0x21/0x60
[  343.264958]  dev_queue_xmit+0x1c/0x20
[  343.265470]  netlink_deliver_tap+0x652/0x9c0
[  343.266067]  netlink_unicast+0x5a0/0x7f0
[  343.266608]  ? netlink_attachskb+0x860/0x860
[  343.267183]  ? __sanitizer_cov_trace_pc+0x21/0x60
[  343.267820]  ? write_comp_data+0x2f/0x90
[  343.268367]  netlink_sendmsg+0x922/0xe80
[  343.268899]  ? netlink_unicast+0x7f0/0x7f0
[  343.269472]  ? __sanitizer_cov_trace_pc+0x21/0x60
[  343.270099]  ? write_comp_data+0x2f/0x90
[  343.270644]  ? netlink_unicast+0x7f0/0x7f0
[  343.271210]  sock_sendmsg+0x155/0x190
[  343.271721]  ____sys_sendmsg+0x75f/0x8f0
[  343.272262]  ? kernel_sendmsg+0x60/0x60
[  343.272788]  ? write_comp_data+0x2f/0x90
[  343.273332]  ? write_comp_data+0x2f/0x90
[  343.273869]  ___sys_sendmsg+0x10f/0x190
[  343.274405]  ? sendmsg_copy_msghdr+0x80/0x80
[  343.274984]  ? slab_post_alloc_hook+0x70/0x230
[  343.275597]  ? futex_wait_setup+0x240/0x240
[  343.276175]  ? security_file_alloc+0x3e/0x170
[  343.276779]  ? write_comp_data+0x2f/0x90
[  343.277313]  ? __sanitizer_cov_trace_pc+0x21/0x60
[  343.277969]  ? write_comp_data+0x2f/0x90
[  343.278515]  ? __fget_files+0x1ad/0x260
[  343.279048]  ? __sanitizer_cov_trace_pc+0x21/0x60
[  343.279685]  ? write_comp_data+0x2f/0x90
[  343.280234]  ? __sanitizer_cov_trace_pc+0x21/0x60
[  343.280874]  ? sockfd_lookup_light+0xd1/0x190
[  343.281481]  __sys_sendmsg+0x118/0x200
[  343.281998]  ? __sys_sendmsg_sock+0x40/0x40
[  343.282578]  ? alloc_fd+0x229/0x5e0
[  343.283070]  ? write_comp_data+0x2f/0x90
[  343.283610]  ? write_comp_data+0x2f/0x90
[  343.284135]  ? __sanitizer_cov_trace_pc+0x21/0x60
[  343.284776]  ? ktime_get_coarse_real_ts64+0xb8/0xf0
[  343.285450]  __x64_sys_sendmsg+0x7d/0xc0
[  343.285981]  ? syscall_enter_from_user_mode+0x4d/0x70
[  343.286664]  do_syscall_64+0x3a/0x80
[  343.287158]  entry_SYSCALL_64_after_hwframe+0x44/0xae
[  343.287850] RIP: 0033:0x7fdde24cf289
[  343.288344] Code: 01 00 48 81 c4 80 00 00 00 e9 f1 fe ff ff 0f 1f 00
48 89 f8 48 89 f7 48 89 d6 48 89 ca 4d 89 c2 4d 89 c8 4c 8b 4c 24 08 0f
05 <48> 3d 01 f0 ff ff 73 01 c3 48 8b 0d b7 db 2c 00 f7 d8 64 89 01 48
[  343.290729] RSP: 002b:00007fdde2bd6d98 EFLAGS: 00000246 ORIG_RAX:
000000000000002e
[  343.291730] RAX: ffffffffffffffda RBX: 0000000000000000 RCX:
00007fdde24cf289
[  343.292673] RDX: 0000000000000000 RSI: 00000000200000c0 RDI:
0000000000000004
[  343.293618] RBP: 00007fdde2bd6e20 R08: 0000000100000001 R09:
0000000000000000
[  343.294557] R10: 0000000100000001 R11: 0000000000000246 R12:
0000000000000000
[  343.295493] R13: 0000000000021000 R14: 0000000000000000 R15:
00007fdde2bd7700
[  343.296432]  </TASK>
[  343.296735] Modules linked in: sch_netem ip6_vti ip_vti ip_gre ipip
sit ip_tunnel geneve macsec macvtap tap ipvlan macvlan 8021q garp mrp
hsr wireguard libchacha20poly1305 chacha_x86_64 poly1305_x86_64
ip6_udp_tunnel udp_tunnel libblake2s blake2s_x86_64 libblake2s_generic
curve25519_x86_64 libcurve25519_generic libchacha xfrm_interface
xfrm6_tunnel tunnel4 veth netdevsim psample batman_adv nlmon dummy team
bonding tls vcan ip6_gre ip6_tunnel tunnel6 gre tun ip6t_rpfilter
ipt_REJECT nf_reject_ipv4 ip6t_REJECT nf_reject_ipv6 xt_conntrack ip_set
ebtable_nat ebtable_broute ip6table_nat ip6table_mangle
ip6table_security ip6table_raw iptable_nat nf_nat nf_conntrack
nf_defrag_ipv6 nf_defrag_ipv4 iptable_mangle iptable_security
iptable_raw ebtable_filter ebtables rfkill ip6table_filter ip6_tables
iptable_filter ppdev bochs drm_vram_helper drm_ttm_helper ttm
drm_kms_helper cec parport_pc drm joydev floppy parport sg syscopyarea
sysfillrect sysimgblt i2c_piix4 qemu_fw_cfg fb_sys_fops pcspkr
[  343.297459]  ip_tables xfs virtio_net net_failover failover sd_mod
sr_mod cdrom t10_pi ata_generic pata_acpi ata_piix libata virtio_pci
virtio_pci_legacy_dev serio_raw virtio_pci_modern_dev dm_mirror
dm_region_hash dm_log dm_mod
[  343.311074] Dumping ftrace buffer:
[  343.311532]    (ftrace buffer empty)
[  343.312040] ---[ end trace a2e3db5a6ae05099 ]---
[  343.312691] RIP: 0010:netem_enqueue+0x1590/0x33c0 [sch_netem]
[  343.313481] Code: 89 85 58 ff ff ff e8 5f 5d e9 d3 48 8b b5 48 ff ff
ff 8b 8d 50 ff ff ff 8b 85 58 ff ff ff 48 8b bd 70 ff ff ff 31 d2 2b 4f
74 <f7> f1 48 b8 00 00 00 00 00 fc ff df 49 01 d5 4c 89 e9 48 c1 e9 03
[  343.315893] RSP: 0018:ffff88800bcd7368 EFLAGS: 00010246
[  343.316622] RAX: 00000000ba7c0a9c RBX: 0000000000000001 RCX:
0000000000000000
[  343.317585] RDX: 0000000000000000 RSI: ffff88800f8edb10 RDI:
ffff88800f8eda40
[  343.318549] RBP: ffff88800bcd7458 R08: 0000000000000000 R09:
ffffffff94fb8445
[  343.319503] R10: ffffffff94fb8336 R11: ffffffff94fb8445 R12:
0000000000000000
[  343.320455] R13: ffff88800a5a7000 R14: ffff88800a5b5800 R15:
0000000000000020
[  343.321414] FS:  00007fdde2bd7700(0000) GS:ffff888109780000(0000)
knlGS:0000000000000000
[  343.322489] CS:  0010 DS: 0000 ES: 0000 CR0: 0000000080050033
[  343.323283] CR2: 00000000200000c0 CR3: 000000000ef4c000 CR4:
00000000000006e0
[  343.324264] Kernel panic - not syncing: Fatal exception in interrupt
[  343.333717] Dumping ftrace buffer:
[  343.334175]    (ftrace buffer empty)
[  343.334653] Kernel Offset: 0x13600000 from 0xffffffff81000000
(relocation range: 0xffffffff80000000-0xffffffffbfffffff)
[  343.336027] Rebooting in 86400 seconds..
Reported-by: Nsyzkaller <syzkaller@googlegroups.com>
Signed-off-by: NHarshit Mogalapalli <harshit.m.mogalapalli@oracle.com>
Link: https://lore.kernel.org/r/20211129175328.55339-1-harshit.m.mogalapalli@oracle.comSigned-off-by: NJakub Kicinski <kuba@kernel.org>
Signed-off-by: NSasha Levin <sashal@kernel.org>
Signed-off-by: NChen Jun <chenjun102@huawei.com>
Signed-off-by: NZheng Zengkai <zhengzengkai@huawei.com>

e8b75623

i2c: rk3x: Handle a spurious start completion interrupt flag · c5fd60a1

由 Ondrej Jirman 提交于 1月 14, 2022

stable inclusion
from stable-v5.10.87
commit bca6af4325d6f1d5af95b24eed49bd4fb84c8f61
bugzilla: 186049 https://gitee.com/openeuler/kernel/issues/I4QVYL

Reference: https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git/commit/?id=bca6af4325d6f1d5af95b24eed49bd4fb84c8f61

--------------------------------

[ Upstream commit 02fe0fbd ]

In a typical read transfer, start completion flag is being set after
read finishes (notice ipd bit 4 being set):

trasnfer poll=0
i2c start
rk3x-i2c fdd40000.i2c: IRQ: state 1, ipd: 10
i2c read
rk3x-i2c fdd40000.i2c: IRQ: state 2, ipd: 1b
i2c stop
rk3x-i2c fdd40000.i2c: IRQ: state 4, ipd: 33

This causes I2C transfer being aborted in polled mode from a stop completion
handler:

trasnfer poll=1
i2c start
rk3x-i2c fdd40000.i2c: IRQ: state 1, ipd: 10
i2c read
rk3x-i2c fdd40000.i2c: IRQ: state 2, ipd: 0
rk3x-i2c fdd40000.i2c: IRQ: state 2, ipd: 1b
i2c stop
rk3x-i2c fdd40000.i2c: IRQ: state 4, ipd: 13
i2c stop
rk3x-i2c fdd40000.i2c: unexpected irq in STOP: 0x10

Clearing the START flag after read fixes the issue without any obvious
side effects.

This issue was dicovered on RK3566 when adding support for powering
off the RK817 PMIC.
Signed-off-by: NOndrej Jirman <megous@megous.com>
Reviewed-by: NJohn Keeping <john@metanate.com>
Signed-off-by: NWolfram Sang <wsa@kernel.org>
Signed-off-by: NSasha Levin <sashal@kernel.org>
Signed-off-by: NChen Jun <chenjun102@huawei.com>
Signed-off-by: NZheng Zengkai <zhengzengkai@huawei.com>

c5fd60a1

parisc/agp: Annotate parisc agp init functions with __init · a2ae13c8

由 Helge Deller 提交于 1月 14, 2022

stable inclusion
from stable-v5.10.87
commit d6edec8a7b55871db6e2faf7bd39a2e87b020b2b
bugzilla: 186049 https://gitee.com/openeuler/kernel/issues/I4QVYL

Reference: https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git/commit/?id=d6edec8a7b55871db6e2faf7bd39a2e87b020b2b

--------------------------------

[ Upstream commit 8d88382b ]
Signed-off-by: NHelge Deller <deller@gmx.de>
Reported-by: Nkernel test robot <lkp@intel.com>
Signed-off-by: NSasha Levin <sashal@kernel.org>
Signed-off-by: NChen Jun <chenjun102@huawei.com>
Signed-off-by: NZheng Zengkai <zhengzengkai@huawei.com>

a2ae13c8

ALSA: hda/hdmi: fix HDA codec entry table order for ADL-P · 401e73e7

由 Kai Vehmanen 提交于 1月 14, 2022

stable inclusion
from stable-v5.10.87
commit cf520ccffd9a3d9de35e900b9ecda2f8c7b5c1ad
bugzilla: 186049 https://gitee.com/openeuler/kernel/issues/I4QVYL

Reference: https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git/commit/?id=cf520ccffd9a3d9de35e900b9ecda2f8c7b5c1ad

--------------------------------

[ Upstream commit 289047db ]

Keep the HDA_CODEC_ENTRY entries sorted by the codec VID. ADL-P
is the only misplaced Intel HDMI codec.
Signed-off-by: NKai Vehmanen <kai.vehmanen@linux.intel.com>
Link: https://lore.kernel.org/r/20211130124732.696896-2-kai.vehmanen@linux.intel.comSigned-off-by: NTakashi Iwai <tiwai@suse.de>
Signed-off-by: NSasha Levin <sashal@kernel.org>
Signed-off-by: NChen Jun <chenjun102@huawei.com>
Signed-off-by: NZheng Zengkai <zhengzengkai@huawei.com>

401e73e7

ALSA: hda: Add Intel DG2 PCI ID and HDMI codec vid · 05974053

由 Kai Vehmanen 提交于 1月 14, 2022

stable inclusion
from stable-v5.10.87
commit 701a07fd0274267626d34a088a172a36e967df2c
bugzilla: 186049 https://gitee.com/openeuler/kernel/issues/I4QVYL

Reference: https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git/commit/?id=701a07fd0274267626d34a088a172a36e967df2c

--------------------------------

[ Upstream commit d85ffff5 ]

Add HD Audio PCI ID and HDMI codec vendor ID for Intel DG2.
Reviewed-by: NUma Shankar <uma.shankar@intel.com>
Signed-off-by: NKai Vehmanen <kai.vehmanen@linux.intel.com>
Link: https://lore.kernel.org/r/20211130124732.696896-1-kai.vehmanen@linux.intel.comSigned-off-by: NTakashi Iwai <tiwai@suse.de>
Signed-off-by: NSasha Levin <sashal@kernel.org>
Signed-off-by: NChen Jun <chenjun102@huawei.com>
Signed-off-by: NZheng Zengkai <zhengzengkai@huawei.com>

05974053

net/mlx4_en: Update reported link modes for 1/10G · 171e192d

由 Erik Ekman 提交于 1月 14, 2022

stable inclusion
from stable-v5.10.87
commit 6d22a96d12d736971d5b3e5007956fec5724f27e
bugzilla: 186049 https://gitee.com/openeuler/kernel/issues/I4QVYL

Reference: https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git/commit/?id=6d22a96d12d736971d5b3e5007956fec5724f27e

--------------------------------

[ Upstream commit 2191b1df ]

When link modes were initially added in commit 2c762679
("net/mlx4_en: Use PTYS register to query ethtool settings") and
later updated for the new ethtool API in commit 3d8f7cc7
("net: mlx4: use new ETHTOOL_G/SSETTINGS API") the only 1/10G non-baseT
link modes configured were 1000baseKX, 10000baseKX4 and 10000baseKR.
It looks like these got picked to represent other modes since nothing
better was available.

Switch to using more specific link modes added in commit 5711a982
("net: ethtool: add support for 1000BaseX and missing 10G link modes").

Tested with MCX311A-XCAT connected via DAC.
Before:

% sudo ethtool enp3s0
Settings for enp3s0:
	Supported ports: [ FIBRE ]
	Supported link modes:   1000baseKX/Full
	                        10000baseKR/Full
	Supported pause frame use: Symmetric Receive-only
	Supports auto-negotiation: No
	Supported FEC modes: Not reported
	Advertised link modes:  1000baseKX/Full
	                        10000baseKR/Full
	Advertised pause frame use: Symmetric
	Advertised auto-negotiation: No
	Advertised FEC modes: Not reported
	Speed: 10000Mb/s
	Duplex: Full
	Auto-negotiation: off
	Port: Direct Attach Copper
	PHYAD: 0
	Transceiver: internal
	Supports Wake-on: d
	Wake-on: d
        Current message level: 0x00000014 (20)
                               link ifdown
	Link detected: yes

With this change:

% sudo ethtool enp3s0
	Settings for enp3s0:
	Supported ports: [ FIBRE ]
	Supported link modes:   1000baseX/Full
	                        10000baseCR/Full
 	                        10000baseSR/Full
	Supported pause frame use: Symmetric Receive-only
	Supports auto-negotiation: No
	Supported FEC modes: Not reported
	Advertised link modes:  1000baseX/Full
 	                        10000baseCR/Full
 	                        10000baseSR/Full
	Advertised pause frame use: Symmetric
	Advertised auto-negotiation: No
	Advertised FEC modes: Not reported
	Speed: 10000Mb/s
	Duplex: Full
	Auto-negotiation: off
	Port: Direct Attach Copper
	PHYAD: 0
	Transceiver: internal
	Supports Wake-on: d
	Wake-on: d
        Current message level: 0x00000014 (20)
                               link ifdown
	Link detected: yes
Tested-by: NMichael Stapelberg <michael@stapelberg.ch>
Signed-off-by: NErik Ekman <erik@kryo.se>
Reviewed-by: NTariq Toukan <tariqt@nvidia.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>
Signed-off-by: NSasha Levin <sashal@kernel.org>
Signed-off-by: NChen Jun <chenjun102@huawei.com>
Signed-off-by: NZheng Zengkai <zhengzengkai@huawei.com>

171e192d

Revert "tty: serial: fsl_lpuart: drop earlycon entry for i.MX8QXP" · 37127347

由 Alexander Stein 提交于 1月 14, 2022

stable inclusion
from stable-v5.10.87
commit 999069d8b0407a5423142662ae98fb977ab6f74b
bugzilla: 186049 https://gitee.com/openeuler/kernel/issues/I4QVYL

Reference: https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git/commit/?id=999069d8b0407a5423142662ae98fb977ab6f74b

--------------------------------

[ Upstream commit 4e967973 ]

Revert commit b4b84493 ("tty: serial: fsl_lpuart: drop earlycon entry
for i.MX8QXP"), because this breaks earlycon support on imx8qm/imx8qxp.
While it is true that for earlycon there is no difference between
i.MX8QXP and i.MX7ULP (for now at least), there are differences
regarding clocks and fixups for wakeup support. For that reason it was
deemed unacceptable to add the imx7ulp compatible to device tree in
order to get earlycon working again.
Reviewed-by: NPeng Fan <peng.fan@nxp.com>
Signed-off-by: NAlexander Stein <alexander.stein@ew.tq-group.com>
Link: https://lore.kernel.org/r/20211124073109.805088-1-alexander.stein@ew.tq-group.comSigned-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: NSasha Levin <sashal@kernel.org>
Signed-off-by: NChen Jun <chenjun102@huawei.com>
Signed-off-by: NZheng Zengkai <zhengzengkai@huawei.com>

37127347

s390/test_unwind: use raw opcode instead of invalid instruction · a1c24158

由 Ilie Halip 提交于 1月 14, 2022

stable inclusion
from stable-v5.10.87
commit 27f4ce02b31ad1b7ef627b0b7d0141f645a0df5b
bugzilla: 186049 https://gitee.com/openeuler/kernel/issues/I4QVYL

Reference: https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git/commit/?id=27f4ce02b31ad1b7ef627b0b7d0141f645a0df5b

--------------------------------

[ Upstream commit 53ae7230 ]

Building with clang & LLVM_IAS=1 leads to an error:
    arch/s390/lib/test_unwind.c:179:4: error: invalid register pair
                        "       mvcl    %%r1,%%r1\n"
                        ^

The test creates an invalid instruction that would trap at runtime, but the
LLVM inline assembler tries to validate it at compile time too.

Use the raw instruction opcode instead.
Reported-by: NNick Desaulniers <ndesaulniers@google.com>
Signed-off-by: NIlie Halip <ilie.halip@gmail.com>
Reviewed-by: NNick Desaulniers <ndesaulniers@google.com>
Suggested-by: NUlrich Weigand <Ulrich.Weigand@de.ibm.com>
Link: https://github.com/ClangBuiltLinux/linux/issues/1421
Link: https://lore.kernel.org/r/20211117174822.3632412-1-ilie.halip@gmail.comReviewed-by: NChristian Borntraeger <borntraeger@de.ibm.com>
Signed-off-by: NChristian Borntraeger <borntraeger@de.ibm.com>
[hca@linux.ibm.com: use illegal opcode, and update comment]
Signed-off-by: NHeiko Carstens <hca@linux.ibm.com>
Signed-off-by: NSasha Levin <sashal@kernel.org>
Signed-off-by: NChen Jun <chenjun102@huawei.com>
Signed-off-by: NZheng Zengkai <zhengzengkai@huawei.com>

a1c24158

KVM: arm64: Save PSTATE early on exit · 6dfb5fc4

由 Marc Zyngier 提交于 1月 14, 2022

stable inclusion
from stable-v5.10.87
commit 9eab949e2b90b10720f24dd22cad7cc63452f14a
bugzilla: 186049 https://gitee.com/openeuler/kernel/issues/I4QVYL

Reference: https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git/commit/?id=9eab949e2b90b10720f24dd22cad7cc63452f14a

--------------------------------

[ Upstream commit 83bb2c1a ]

In order to be able to use primitives such as vcpu_mode_is_32bit(),
we need to synchronize the guest PSTATE. However, this is currently
done deep into the bowels of the world-switch code, and we do have
helpers evaluating this much earlier (__vgic_v3_perform_cpuif_access
and handle_aarch32_guest, for example).

Move the saving of the guest pstate into the early fixups, which
cures the first issue. The second one will be addressed separately.
Tested-by: NFuad Tabba <tabba@google.com>
Reviewed-by: NFuad Tabba <tabba@google.com>
Signed-off-by: NMarc Zyngier <maz@kernel.org>
Signed-off-by: NSasha Levin <sashal@kernel.org>
Signed-off-by: NChen Jun <chenjun102@huawei.com>
Signed-off-by: NZheng Zengkai <zhengzengkai@huawei.com>

6dfb5fc4

drm/msm/dsi: set default num_data_lanes · c92fb72e

由 Philip Chen 提交于 1月 14, 2022

stable inclusion
from stable-v5.10.87
commit 990fd815ec88487f6191bbf5ae06919ced82902d
bugzilla: 186049 https://gitee.com/openeuler/kernel/issues/I4QVYL

Reference: https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git/commit/?id=990fd815ec88487f6191bbf5ae06919ced82902d

--------------------------------

[ Upstream commit cd92cc18 ]

If "data_lanes" property of the dsi output endpoint is missing in
the DT, num_data_lanes would be 0 by default, which could cause
dsi_host_attach() to fail if dsi->lanes is set to a non-zero value
by the bridge driver.

According to the binding document of msm dsi controller, the
input/output endpoint of the controller is expected to have 4 lanes.
So let's set num_data_lanes to 4 by default.
Signed-off-by: NPhilip Chen <philipchen@chromium.org>
Reviewed-by: NDouglas Anderson <dianders@chromium.org>
Reviewed-by: NStephen Boyd <swboyd@chromium.org>
Link: https://lore.kernel.org/r/20211030100812.1.I6cd9af36b723fed277d34539d3b2ba4ca233ad2d@changeidSigned-off-by: NRob Clark <robdclark@chromium.org>
Signed-off-by: NSasha Levin <sashal@kernel.org>
Signed-off-by: NChen Jun <chenjun102@huawei.com>
Signed-off-by: NZheng Zengkai <zhengzengkai@huawei.com>

c92fb72e

nfc: fix segfault in nfc_genl_dump_devices_done · ca0b8161

由 Tadeusz Struk 提交于 1月 14, 2022

stable inclusion
from stable-v5.10.87
commit c602863ad28ec86794cb4ab4edea5324f555f181
bugzilla: 186049 https://gitee.com/openeuler/kernel/issues/I4QVYL

Reference: https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git/commit/?id=c602863ad28ec86794cb4ab4edea5324f555f181

--------------------------------

commit fd79a0cb upstream.

When kmalloc in nfc_genl_dump_devices() fails then
nfc_genl_dump_devices_done() segfaults as below

KASAN: null-ptr-deref in range [0x0000000000000008-0x000000000000000f]
CPU: 0 PID: 25 Comm: kworker/0:1 Not tainted 5.16.0-rc4-01180-g2a987e65-dirty #5
Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.14.0-6.fc35 04/01/2014
Workqueue: events netlink_sock_destruct_work
RIP: 0010:klist_iter_exit+0x26/0x80
Call Trace:
<TASK>
class_dev_iter_exit+0x15/0x20
nfc_genl_dump_devices_done+0x3b/0x50
genl_lock_done+0x84/0xd0
netlink_sock_destruct+0x8f/0x270
__sk_destruct+0x64/0x3b0
sk_destruct+0xa8/0xd0
__sk_free+0x2e8/0x3d0
sk_free+0x51/0x90
netlink_sock_destruct_work+0x1c/0x20
process_one_work+0x411/0x710
worker_thread+0x6fd/0xa80

Link: https://syzkaller.appspot.com/bug?id=fc0fa5a53db9edd261d56e74325419faf18bd0df
Reported-by: syzbot+f9f76f4a0766420b4a02@syzkaller.appspotmail.com
Signed-off-by: NTadeusz Struk <tadeusz.struk@linaro.org>
Reviewed-by: NKrzysztof Kozlowski <krzysztof.kozlowski@canonical.com>
Link: https://lore.kernel.org/r/20211208182742.340542-1-tadeusz.struk@linaro.orgSigned-off-by: NJakub Kicinski <kuba@kernel.org>
Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: NChen Jun <chenjun102@huawei.com>
Signed-off-by: NZheng Zengkai <zhengzengkai@huawei.com>

ca0b8161

cgroup: Use open-time cgroup namespace for process migration perm checks · 2eea7319

由 Tejun Heo 提交于 1月 14, 2022

mainline inclusion
from mainline
commit e5745764
bugzilla: 186050 https://gitee.com/openeuler/kernel/issues/I4DDEL
CVE: CVE-2021-4197

Reference: https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git/commit/?id=e57457641613fef0d147ede8bd6a3047df588b95

--------------------------------

cgroup process migration permission checks are performed at write time as
whether a given operation is allowed or not is dependent on the content of
the write - the PID. This currently uses current's cgroup namespace which is
a potential security weakness as it may allow scenarios where a less
privileged process tricks a more privileged one into writing into a fd that
it created.

This patch makes cgroup remember the cgroup namespace at the time of open
and uses it for migration permission checks instad of current's. Note that
this only applies to cgroup2 as cgroup1 doesn't have namespace support.

This also fixes a use-after-free bug on cgroupns reported in

 https://lore.kernel.org/r/00000000000048c15c05d0083397@google.com

Note that backporting this fix also requires the preceding patch.
Reported-by: N"Eric W. Biederman" <ebiederm@xmission.com>
Suggested-by: NLinus Torvalds <torvalds@linuxfoundation.org>
Cc: Michal Koutný <mkoutny@suse.com>
Cc: Oleg Nesterov <oleg@redhat.com>
Reviewed-by: NMichal Koutný <mkoutny@suse.com>
Reported-by: syzbot+50f5cf33a284ce738b62@syzkaller.appspotmail.com
Link: https://lore.kernel.org/r/00000000000048c15c05d0083397@google.com
Fixes: 5136f636 ("cgroup: implement "nsdelegate" mount option")
Signed-off-by: NTejun Heo <tj@kernel.org>
Signed-off-by: NLu Jialin <lujialin4@huawei.com>
Signed-off-by: NZheng Zengkai <zhengzengkai@huawei.com>

2eea7319

cgroup: Allocate cgroup_file_ctx for kernfs_open_file->priv · 885c3688

由 Tejun Heo 提交于 1月 14, 2022

mainline inclusion
from mainline
commit 0d2b5955
bugzilla: 186050 https://gitee.com/openeuler/kernel/issues/I4DDEL
CVE: CVE-2021-4197

Reference: https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git/commit/?id=0d2b5955b36250a9428c832664f2079cbf723bec

--------------------------------

of->priv is currently used by each interface file implementation to store
private information. This patch collects the current two private data usages
into struct cgroup_file_ctx which is allocated and freed by the common path.
This allows generic private data which applies to multiple files, which will
be used to in the following patch.

Note that cgroup_procs iterator is now embedded as procs.iter in the new
cgroup_file_ctx so that it doesn't need to be allocated and freed
separately.

v2: union dropped from cgroup_file_ctx and the procs iterator is embedded in
    cgroup_file_ctx as suggested by Linus.

v3: Michal pointed out that cgroup1's procs pidlist uses of->priv too.
    Converted. Didn't change to embedded allocation as cgroup1 pidlists get
    stored for caching.
Signed-off-by: NTejun Heo <tj@kernel.org>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Reviewed-by: NMichal Koutný <mkoutny@suse.com>
Conflict:
	kernel/cgroup/cgroup.c
Signed-off-by: NLu Jialin <lujialin4@huawei.com>
Signed-off-by: NZheng Zengkai <zhengzengkai@huawei.com>

885c3688

cgroup: Use open-time credentials for process migraton perm checks · 0cf64d4c

由 Tejun Heo 提交于 1月 14, 2022

mainline inclusion
from mainline
commit 1756d799
bugzilla: 186050 https://gitee.com/openeuler/kernel/issues/I4DDEL
CVE: CVE-2021-4197

Reference: https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git/commit/?id=1756d7994ad85c2479af6ae5a9750b92324685af

--------------------------------

cgroup process migration permission checks are performed at write time as
whether a given operation is allowed or not is dependent on the content of
the write - the PID. This currently uses current's credentials which is a
potential security weakness as it may allow scenarios where a less
privileged process tricks a more privileged one into writing into a fd that
it created.

This patch makes both cgroup2 and cgroup1 process migration interfaces to
use the credentials saved at the time of open (file->f_cred) instead of
current's.
Reported-by: N"Eric W. Biederman" <ebiederm@xmission.com>
Suggested-by: NLinus Torvalds <torvalds@linuxfoundation.org>
Fixes: 187fe840 ("cgroup: require write perm on common ancestor when moving processes on the default hierarchy")
Reviewed-by: NMichal Koutný <mkoutny@suse.com>
Signed-off-by: NTejun Heo <tj@kernel.org>
Conflict:
	kernel/cgroup/cgroup-v1.c
Signed-off-by: NLu Jialin <lujialin4@huawei.com>
Signed-off-by: NZheng Zengkai <zhengzengkai@huawei.com>

0cf64d4c

cgroup/cgroup.c: replace 'of->kn->priv' with of_cft() · 1cc3e33b

由 liulangrenaaa 提交于 1月 14, 2022

mainline inclusion
from mainline-v5.11-rc2
commit 5a7b5f32
bugzilla: 186050 https://gitee.com/openeuler/kernel/issues/I4DDEL
CVE: CVE-2021-4197

Reference: https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git/commit/?id=5a7b5f32c5aa628841502d19a813c633ff6ecbe4

--------------------------------

we have supplied the inline function: of_cft() in cgroup.h.

So replace the direct use 'of->kn->priv' with inline func
of_cft(), which is more readable.
Signed-off-by: Hui Su <sh_def@163.com>
Signed-off-by: NTejun Heo <tj@kernel.org>
Signed-off-by: NLu Jialin <lujialin4@huawei.com>
Signed-off-by: NZheng Zengkai <zhengzengkai@huawei.com>

1cc3e33b

cgroup: cgroup.{procs,threads} factor out common parts · 7d43c940

由 Michal Koutný 提交于 1月 14, 2022

mainline inclusion
from mainline-v5.12-rc1
commit da70862e
bugzilla: 186050 https://gitee.com/openeuler/kernel/issues/I4DDEL
CVE: CVE-2021-4197

Reference: https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git/commit/?id=da70862efe0065bada33d67a903270cdbbaf07d9

--------------------------------

The functions cgroup_threads_write and cgroup_procs_write are almost
identical. In order to reduce duplication, factor out the common code in
similar fashion we already do for other threadgroup/task functions. No
functional changes are intended.
Suggested-by: NHao Lee <haolee.swjtu@gmail.com>
Signed-off-by: NMichal Koutný <mkoutny@suse.com>
Reviewed-by: NDaniel Jordan <daniel.m.jordan@oracle.com>
Signed-off-by: NTejun Heo <tj@kernel.org>
Signed-off-by: NLu Jialin <lujialin4@huawei.com>
Signed-off-by: NZheng Zengkai <zhengzengkai@huawei.com>

7d43c940

netfilter: selftest: conntrack_vrf.sh: fix file permission · 72170121

由 Greg Kroah-Hartman 提交于 1月 14, 2022

stable inclusion
from stable-v5.10.86
commit 32414491834c80ab39519467deb3f8d1e4f5bade
bugzilla: 186045 https://gitee.com/openeuler/kernel/issues/I4QVPD

Reference: https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git/commit/?id=32414491834c80ab39519467deb3f8d1e4f5bade

--------------------------------

When backporting 33b8aad2 ("selftests: netfilter: add a
vrf+conntrack testcase") to this stable branch, the executable bits were
not properly set on the
tools/testing/selftests/netfilter/conntrack_vrf.sh file due to quilt not
honoring them.

Fix this up manually by setting the correct mode.
Reported-by: N"Rantala, Tommi T. (Nokia - FI/Espoo)" <tommi.t.rantala@nokia.com>
Link: https://lore.kernel.org/r/234d7a6a81664610fdf21ac72730f8bd10d3f46f.camel@nokia.comSigned-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: NChen Jun <chenjun102@huawei.com>
Signed-off-by: NZheng Zengkai <zhengzengkai@huawei.com>

72170121

Documentation/Kbuild: Remove references to gcc-plugin.sh · fa370854

由 Robert Karszniewicz 提交于 1月 14, 2022

stable inclusion
from stable-v5.10.85
commit 47301c06f602f75fd7ba8a239a7de4b3b17aaa0d
bugzilla: 186032 https://gitee.com/openeuler/kernel/issues/I4QVI4

Reference: https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git/commit/?id=47301c06f602f75fd7ba8a239a7de4b3b17aaa0d

--------------------------------

commit 1cabe74f upstream.

gcc-plugin.sh has been removed in commit
1e860048 ("gcc-plugins: simplify GCC plugin-dev capability test").
Signed-off-by: NRobert Karszniewicz <r.karszniewicz@phytec.de>
Reviewed-by: NKees Cook <keescook@chromium.org>
Signed-off-by: NMasahiro Yamada <masahiroy@kernel.org>
Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: NChen Jun <chenjun102@huawei.com>
Signed-off-by: NZheng Zengkai <zhengzengkai@huawei.com>

fa370854

openeuler / Kernel 1 年多 前同步成功

openeuler / Kernel
1 年多前同步成功