- 29 3月, 2006 40 次提交
-
-
由 S P 提交于
Signed-off-by: NS P <speattle@yahoo.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Herbert Xu 提交于
Basically this patch moves the generic tunnel protocol stuff out of xfrm4_tunnel/xfrm6_tunnel and moves it into the new files of tunnel4.c and tunnel6 respectively. The reason for this is that the problem that Hugo uncovered is only the tip of the iceberg. The real problem is that when we removed the dependency of ipip on xfrm4_tunnel we didn't really consider the module case at all. For instance, as it is it's possible to build both ipip and xfrm4_tunnel as modules and if the latter is loaded then ipip simply won't load. After considering the alternatives I've decided that the best way out of this is to restore the dependency of ipip on the non-xfrm-specific part of xfrm4_tunnel. This is acceptable IMHO because the intention of the removal was really to be able to use ipip without the xfrm subsystem. This is still preserved by this patch. So now both ipip/xfrm4_tunnel depend on the new tunnel4.c which handles the arbitration between the two. The order of processing is determined by a simple integer which ensures that ipip gets processed before xfrm4_tunnel. The situation for ICMP handling is a little bit more complicated since we may not have enough information to determine who it's for. It's not a big deal at the moment since the xfrm ICMP handlers are basically no-ops. In future we can deal with this when we look at ICMP caching in general. The user-visible change to this is the removal of the TUNNEL Kconfig prompts. This makes sense because it can only be used through IPCOMP as it stands. The addition of the new modules shouldn't introduce any problems since module dependency will cause them to be loaded. Oh and I also turned some unnecessary pskb's in IPv6 related to this patch to skb's. Signed-off-by: NHerbert Xu <herbert@gondor.apana.org.au> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Denis Vlasenko 提交于
Sizes in bytes (allyesconfig, i386) and files where those inlines are used: 238 sock_queue_rcv_skb 2.6.16/net/x25/x25_in.o 238 sock_queue_rcv_skb 2.6.16/net/rose/rose_in.o 238 sock_queue_rcv_skb 2.6.16/net/packet/af_packet.o 238 sock_queue_rcv_skb 2.6.16/net/netrom/nr_in.o 238 sock_queue_rcv_skb 2.6.16/net/llc/llc_sap.o 238 sock_queue_rcv_skb 2.6.16/net/llc/llc_conn.o 238 sock_queue_rcv_skb 2.6.16/net/irda/af_irda.o 238 sock_queue_rcv_skb 2.6.16/net/ipx/af_ipx.o 238 sock_queue_rcv_skb 2.6.16/net/ipv6/udp.o 238 sock_queue_rcv_skb 2.6.16/net/ipv6/raw.o 238 sock_queue_rcv_skb 2.6.16/net/ipv4/udp.o 238 sock_queue_rcv_skb 2.6.16/net/ipv4/raw.o 238 sock_queue_rcv_skb 2.6.16/net/ipv4/ipmr.o 238 sock_queue_rcv_skb 2.6.16/net/econet/econet.o 238 sock_queue_rcv_skb 2.6.16/net/econet/af_econet.o 238 sock_queue_rcv_skb 2.6.16/net/bluetooth/sco.o 238 sock_queue_rcv_skb 2.6.16/net/bluetooth/l2cap.o 238 sock_queue_rcv_skb 2.6.16/net/bluetooth/hci_sock.o 238 sock_queue_rcv_skb 2.6.16/net/ax25/ax25_in.o 238 sock_queue_rcv_skb 2.6.16/net/ax25/af_ax25.o 238 sock_queue_rcv_skb 2.6.16/net/appletalk/ddp.o 238 sock_queue_rcv_skb 2.6.16/drivers/net/pppoe.o 276 sk_receive_skb 2.6.16/net/decnet/dn_nsp_in.o 276 sk_receive_skb 2.6.16/net/dccp/ipv6.o 276 sk_receive_skb 2.6.16/net/dccp/ipv4.o 276 sk_receive_skb 2.6.16/net/dccp/dccp_ipv6.o 276 sk_receive_skb 2.6.16/drivers/net/pppoe.o 209 sk_dst_check 2.6.16/net/ipv6/ip6_output.o 209 sk_dst_check 2.6.16/net/ipv4/udp.o 209 sk_dst_check 2.6.16/net/decnet/dn_nsp_out.o Large inlines with multiple callers: Size Uses Wasted Name and definition ===== ==== ====== ================================================ 238 21 4360 sock_queue_rcv_skb include/net/sock.h 109 10 801 sock_recv_timestamp include/net/sock.h 276 4 768 sk_receive_skb include/net/sock.h 94 8 518 __sk_dst_check include/net/sock.h 209 3 378 sk_dst_check include/net/sock.h 131 4 333 sk_setup_caps include/net/sock.h 152 2 132 sk_stream_alloc_pskb include/net/sock.h 125 2 105 sk_stream_writequeue_purge include/net/sock.h Signed-off-by: NAndrew Morton <akpm@osdl.org> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 David S. Miller 提交于
Just use a local econet_mutex instead. Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Petr Vandrovec 提交于
Fix kernel oopses whenever somebody issues compatible ioctl on AppleTalk, Econet, IPX or IRDA socket. For AppleTalk/Econet/IRDA it restores state in which these sockets were before compat_ioctl was introduced to the socket ops, for IPX it implements support for 4 ioctls which were not implemented before - as these ioctls use structures which match between 32bit and 64bit userspace, no special code is needed, just call 64bit ioctl handler. Signed-off-by: NPetr Vandrovec <petr@vandrovec.name> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 David S. Miller 提交于
Sorely out of date. Add the linux-net wiki web site to the NETWORKING maintainers entry, on which we maintain the current networking TODO list. Noticed by Randy Dunlap. Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Michael Chan 提交于
Update version to 3.55. Signed-off-by: NMichael Chan <mchan@broadcom.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Michael Chan 提交于
Skip the main timer code if interrupts are disabled in the full lock state. Signed-off-by: NMichael Chan <mchan@broadcom.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Michael Chan 提交于
Speed up SRAM read and write functions if possible by using MMIO instead of config. cycles. With this change, the post reset signature done at the end of D3 power change must now be moved before the D3 power change. IBM reported a problem on powerpc blades during ethtool self test that was caused by the memory test taking excessively long. Config. cycles are very slow on powerpc and the memory test can take more than 10 seconds to complete using config. cycles. As a result, NETDEV WATCHDOG can be triggered during self test and the chip can end up in a funny state. Signed-off-by: NMichael Chan <mchan@broadcom.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Michael Chan 提交于
Fix PHY loopback failure on some 5700 devices. Signed-off-by: NMichael Chan <mchan@broadcom.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Michael Chan 提交于
Need to check the TG3_FLAG_40BIT_DMA_BUG flag in the workaround code path instead of device flags. Signed-off-by: NMichael Chan <mchan@broadcom.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Michael Chan 提交于
Some older bootcode in some devices may report 0 MAC address in SRAM when booting up from low power state. This patch fixes the problem by checking for a valid MAC address in SRAM and falling back to NVRAM if necessary. Thanks to walt <wa1ter@myrealbox.com> for reporting the problem and helping to debug it. Signed-off-by: NMichael Chan <mchan@broadcom.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Linus Torvalds 提交于
* master.kernel.org:/home/rmk/linux-2.6-arm: [ARM] 3388/1: ixp23xx: add core ixp23xx support [ARM] 3417/1: add support for logicpd pxa270 card engine [ARM] 3387/1: ixp23xx: add defconfig [ARM] 3377/2: add support for intel xsc3 core [ARM] Move ice-dcc code into misc.c [ARM] Fix decompressor serial IO to give CRLF not LFCR [ARM] proc-v6: mark page table walks outer-cacheable, shared. Enable NX. [ARM] nommu: trivial patch for arch/arm/lib/Makefile [ARM] 3416/1: Update LART site URL [ARM] 3415/1: Akita: Add missing EXPORT_SYMBOL [ARM] 3414/1: ep93xx: reset ethernet controller before uncompressing
-
由 Linus Torvalds 提交于
* master.kernel.org:/home/rmk/linux-2.6-serial: [SERIAL] Provide Cirrus EP93xx AMBA PL010 serial support. [SERIAL] amba-pl010: allow platforms to specify modem control method [SERIAL] Remove obsoleted au1x00_uart driver [SERIAL] Small time UART configuration fix for AU1100 processor
-
由 Lennert Buytenhek 提交于
Patch from Lennert Buytenhek This patch adds support for the Intel ixp23xx series of CPUs. The ixp23xx is an XSC3 based CPU with 512K of L2 cache, a 64bit 66MHz PCI interface, two DDR RAM interfaces, QDR RAM interfaces, two gigabit MACs, two 10/100 MACs, expansion bus, four microengines, a Media and Switch Fabric unit almost identical to the one on the ixp2400, two xscale (8250ish) UARTs and a bunch of other stuff. This patch adds the core ixp23xx support code, and support for the ADI Engineering Roadrunner, Intel IXDP2351, and IP Fabrics Double Espresso platforms. Signed-off-by: NDeepak Saxena <dsaxena@plexity.net> Signed-off-by: NLennert Buytenhek <buytenh@wantstofly.org> Signed-off-by: NRussell King <rmk+kernel@arm.linux.org.uk>
-
由 Lennert Buytenhek 提交于
Patch from Lennert Buytenhek Add support for the LogicPD PXA270 Card Engine. Signed-off-by: NLennert Buytenhek <buytenh@wantstofly.org> Signed-off-by: NNicolas Pitre <nico@cam.org> Signed-off-by: NRussell King <rmk+kernel@arm.linux.org.uk>
-
由 Lennert Buytenhek 提交于
Patch from Lennert Buytenhek Add ixp23xx defconfig. Signed-off-by: NLennert Buytenhek <buytenh@wantstofly.org> Signed-off-by: NRussell King <rmk+kernel@arm.linux.org.uk>
-
由 Lennert Buytenhek 提交于
Patch from Lennert Buytenhek This patch adds support for the new XScale v3 core. This is an ARMv5 ISA core with the following additions: - L2 cache - I/O coherency support (on select chipsets) - Low-Locality Reference cache attributes (replaces mini-cache) - Supersections (v6 compatible) - 36-bit addressing (v6 compatible) - Single instruction cache line clean/invalidate - LRU cache replacement (vs round-robin) I attempted to merge the XSC3 support into proc-xscale.S, but XSC3 cores have separate errata and have to handle things like L2, so it is simpler to keep it separate. L2 cache support is currently a build option because the L2 enable bit must be set before we enable the MMU and there is no easy way to capture command line parameters at this point. There are still optimizations that can be done such as using LLR for copypage (in theory using the exisiting mini-cache code) but those can be addressed down the road. Signed-off-by: NDeepak Saxena <dsaxena@plexity.net> Signed-off-by: NLennert Buytenhek <buytenh@wantstofly.org> Signed-off-by: NRussell King <rmk+kernel@arm.linux.org.uk>
-
由 Linus Torvalds 提交于
* master.kernel.org:/pub/scm/linux/kernel/git/davej/cpufreq: [CPUFREQ] cpufreq_conservative: keep ignore_nice_load and freq_step values when reselected [CPUFREQ] powernow: remove private for_each_cpu_mask() [CPUFREQ] hotplug cpu fix for powernow-k8 [PATCH] cpufreq_ondemand: add range check [PATCH] cpufreq_ondemand: keep ignore_nice_load value when it is reselected [PATCH] cpufreq_ondemand: Warn if it cannot run due to too long transition latency [PATCH] cpufreq_conservative: alternative initialise approach [PATCH] cpufreq_conservative: make for_each_cpu() safe [PATCH] cpufreq_conservative: alter default responsiveness [PATCH] cpufreq_conservative: aligning of codebase with ondemand
-
git://brick.kernel.dk/data/git/linux-2.6-block由 Linus Torvalds 提交于
* 'cfq-merge' of git://brick.kernel.dk/data/git/linux-2.6-block: [BLOCK] cfq-iosched: seek and async performance fixes [PATCH] ll_rw_blk: fix 80-col offender in put_io_context() [PATCH] cfq-iosched: small cfq_choose_req() optimization [PATCH] [BLOCK] cfq-iosched: change cfq io context linking from list to tree
-
由 Linus Torvalds 提交于
* master.kernel.org:/pub/scm/linux/kernel/git/davem/sparc-2.6: [SPARC64]: Implement futex_atomic_cmpxchg_inatomic().
-
由 Mattia Dongili 提交于
Keep the value of ignore_nice_load and freq_step of the conservative governor after the governor is deselected and reselected. Signed-off-by: NMattia Dongili <malattia@linux.it> Signed-off-by: NDave Jones <davej@redhat.com>
-
由 Andrew Morton 提交于
kernel/futex_compat.c: In function `compat_sys_futex': kernel/futex_compat.c:140: warning: passing arg 1 of `do_futex' makes integer from pointer without a cast kernel/futex_compat.c:140: warning: passing arg 5 of `do_futex' makes integer from pointer without a cast Not sure what Ingo was thinking of here. Put the casts back in. Cc: Ingo Molnar <mingo@elte.hu> Signed-off-by: NAndrew Morton <akpm@osdl.org> Signed-off-by: NLinus Torvalds <torvalds@osdl.org>
-
由 Jesper Juhl 提交于
Get rid of unnessesary casts of kmalloc() return value in sound/ Signed-off-by: NJesper Juhl <jesper.juhl@gmail.com> Cc: Jaroslav Kysela <perex@perex.cz> Cc: Takashi Iwai <tiwai@suse.de> Signed-off-by: NAndrew Morton <akpm@osdl.org> Signed-off-by: NLinus Torvalds <torvalds@osdl.org>
-
由 Alexey Dobriyan 提交于
Fix a lot of typos. Eyeballed by jmc@ in OpenBSD. Signed-off-by: NAlexey Dobriyan <adobriyan@gmail.com> Signed-off-by: NAndrew Morton <akpm@osdl.org> Signed-off-by: NLinus Torvalds <torvalds@osdl.org>
-
由 Jesper Juhl 提交于
Fix a few trivial mistakes in Documentation/cputopology.txt Signed-off-by: NJesper Juhl <jesper.juhl@gmail.com> Signed-off-by: NAndrew Morton <akpm@osdl.org> Signed-off-by: NLinus Torvalds <torvalds@osdl.org>
-
由 Jesper Juhl 提交于
Fix "signed vs unsigned" in nmi_watchdog_tick. Signed-off-by: NJesper Juhl <jesper.juhl@gmail.com> Signed-off-by: NAndrew Morton <akpm@osdl.org> Signed-off-by: NLinus Torvalds <torvalds@osdl.org>
-
由 Jesper Juhl 提交于
vfree() does it's own NULL checking, no need for explicit check before calling it. Signed-off-by: NJesper Juhl <jesper.juhl@gmail.com> Signed-off-by: NAndrew Morton <akpm@osdl.org> Signed-off-by: NLinus Torvalds <torvalds@osdl.org>
-
由 Jesper Juhl 提交于
There's no need to check pointers for NULL before handing them to vfree(). Signed-off-by: NJesper Juhl <jesper.juhl@gmail.com> Signed-off-by: NAndrew Morton <akpm@osdl.org> Signed-off-by: NLinus Torvalds <torvalds@osdl.org>
-
由 Jesper Juhl 提交于
vfree() checks for NULL, no need to do it explicitly. Signed-off-by: NJesper Juhl <jesper.juhl@gmail.com> Acked-by: NZach Brown <zab@zabbo.net> Signed-off-by: NAndrew Morton <akpm@osdl.org> Signed-off-by: NLinus Torvalds <torvalds@osdl.org>
-
由 Jesper Juhl 提交于
There's no need to check the vfree() argument for NULL. Signed-off-by: NJesper Juhl <jesper.juhl@gmail.com> Signed-off-by: NAndrew Morton <akpm@osdl.org> Signed-off-by: NLinus Torvalds <torvalds@osdl.org>
-
由 Matthias Gehre 提交于
Replace all occurences of 0xff.. in calls to function pci_set_dma_mask() and pci_set_consistant_dma_mask() with the corresponding DMA_xBIT_MASK from linux/dma-mapping.h. Signed-off-by: NMatthias Gehre <M.Gehre@gmx.de> Signed-off-by: NAndrew Morton <akpm@osdl.org> Signed-off-by: NLinus Torvalds <torvalds@osdl.org>
-
由 Marcelo Feitoza Parisi 提交于
They deal with wrapping correctly and are nicer to read. Signed-off-by: NMarcelo Feitoza Parisi <marcelo@feitoza.com.br> Signed-off-by: NAlexey Dobriyan <adobriyan@gmail.com> Cc: James Bottomley <James.Bottomley@steeleye.com> Signed-off-by: NAndrew Morton <akpm@osdl.org> Signed-off-by: NLinus Torvalds <torvalds@osdl.org>
-
由 Marcelo Feitoza Parisi 提交于
They deal with wrapping correctly and are nicer to read. Signed-off-by: NMarcelo Feitoza Parisi <marcelo@feitoza.com.br> Signed-off-by: NAlexey Dobriyan <adobriyan@gmail.com> Cc: Bartlomiej Zolnierkiewicz <B.Zolnierkiewicz@elka.pw.edu.pl> Cc: Jens Axboe <axboe@suse.de> Signed-off-by: NAndrew Morton <akpm@osdl.org> Signed-off-by: NLinus Torvalds <torvalds@osdl.org>
-
由 Marcelo Feitoza Parisi 提交于
It deals with wrapping correctly and is nicer to read. Signed-off-by: NMarcelo Feitoza Parisi <marcelo@feitoza.com.br> Signed-off-by: NAlexey Dobriyan <adobriyan@gmail.com> Cc: Dave Jones <davej@codemonkey.org.uk> Signed-off-by: NAndrew Morton <akpm@osdl.org> Signed-off-by: NLinus Torvalds <torvalds@osdl.org>
-
由 Marcelo Feitoza Parisi 提交于
They deal with wrapping correctly and are nicer to read. Signed-off-by: NMarcelo Feitoza Parisi <marcelo@feitoza.com.br> Signed-off-by: NAlexey Dobriyan <adobriyan@gmail.com> Cc: Jens Axboe <axboe@suse.de> Signed-off-by: NAndrew Morton <akpm@osdl.org> Signed-off-by: NLinus Torvalds <torvalds@osdl.org>
-
由 Adrian Bunk 提交于
Nowadays, even Debian stable ships a microcode_ctl utility recent enough to no longer use this ioctl. Signed-off-by: NAdrian Bunk <bunk@stusta.de> Acked-by: NTigran Aivazian <tigran_aivazian@symantec.com> Signed-off-by: NAndrew Morton <akpm@osdl.org> Signed-off-by: NLinus Torvalds <torvalds@osdl.org>
-
由 Jesper Juhl 提交于
Add missing files and descriptions to Documentation/filesystems/00-INDEX Signed-off-by: NJesper Juhl <jesper.juhl@gmail.com> Signed-off-by: NAndrew Morton <akpm@osdl.org> Signed-off-by: NLinus Torvalds <torvalds@osdl.org>
-
由 Arjan van de Ven 提交于
This is a conversion to make the various file_operations structs in fs/ const. Basically a regexp job, with a few manual fixups The goal is both to increase correctness (harder to accidentally write to shared datastructures) and reducing the false sharing of cachelines with things that get dirty in .data (while .rodata is nicely read only and thus cache clean) Signed-off-by: NArjan van de Ven <arjan@infradead.org> Signed-off-by: NAndrew Morton <akpm@osdl.org> Signed-off-by: NLinus Torvalds <torvalds@osdl.org>
-
由 Arjan van de Ven 提交于
Mark the f_ops members of inodes as const, as well as fix the ripple-through this causes by places that copy this f_ops and then "do stuff" with it. Signed-off-by: NArjan van de Ven <arjan@infradead.org> Signed-off-by: NAlexey Dobriyan <adobriyan@gmail.com> Signed-off-by: NAndrew Morton <akpm@osdl.org> Signed-off-by: NLinus Torvalds <torvalds@osdl.org>
-