Skip to content

K
Kernel

openeuler / Kernel
1 年多 前同步成功

通知 8
Star 0
Fork 0
K
Kernel
切换分支/标签
  1. 22 6月, 2009 5 次提交
    • K
      dm: prepare for request based option · cec47e3d
      由 Kiyoshi Ueda 提交于 
      This patch adds core functions for request-based dm.

When struct mapped device (md) is initialized, md->queue has
an I/O scheduler and the following functions are used for
request-based dm as the queue functions:
    make_request_fn: dm_make_request()
    pref_fn:         dm_prep_fn()
    request_fn:      dm_request_fn()
    softirq_done_fn: dm_softirq_done()
    lld_busy_fn:     dm_lld_busy()
Actual initializations are done in another patch (PATCH 2).

Below is a brief summary of how request-based dm behaves, including:
  - making request from bio
  - cloning, mapping and dispatching request
  - completing request and bio
  - suspending md
  - resuming md

  bio to request
  ==============
  md->queue->make_request_fn() (dm_make_request()) calls __make_request()
  for a bio submitted to the md.
  Then, the bio is kept in the queue as a new request or merged into
  another request in the queue if possible.

  Cloning and Mapping
  ===================
  Cloning and mapping are done in md->queue->request_fn() (dm_request_fn()),
  when requests are dispatched after they are sorted by the I/O scheduler.

  dm_request_fn() checks busy state of underlying devices using
  target's busy() function and stops dispatching requests to keep them
  on the dm device's queue if busy.
  It helps better I/O merging, since no merge is done for a request
  once it is dispatched to underlying devices.

  Actual cloning and mapping are done in dm_prep_fn() and map_request()
  called from dm_request_fn().
  dm_prep_fn() clones not only request but also bios of the request
  so that dm can hold bio completion in error cases and prevent
  the bio submitter from noticing the error.
  (See the "Completion" section below for details.)

  After the cloning, the clone is mapped by target's map_rq() function
    and inserted to underlying device's queue using
    blk_insert_cloned_request().

  Completion
  ==========
  Request completion can be hooked by rq->end_io(), but then, all bios
  in the request will have been completed even error cases, and the bio
  submitter will have noticed the error.
  To prevent the bio completion in error cases, request-based dm clones
  both bio and request and hooks both bio->bi_end_io() and rq->end_io():
      bio->bi_end_io(): end_clone_bio()
      rq->end_io():     end_clone_request()

  Summary of the request completion flow is below:
  blk_end_request() for a clone request
    => blk_update_request()
       => bio->bi_end_io() == end_clone_bio() for each clone bio
          => Free the clone bio
          => Success: Complete the original bio (blk_update_request())
             Error:   Don't complete the original bio
    => blk_finish_request()
       => rq->end_io() == end_clone_request()
          => blk_complete_request()
             => dm_softirq_done()
                => Free the clone request
                => Success: Complete the original request (blk_end_request())
                   Error:   Requeue the original request

  end_clone_bio() completes the original request on the size of
  the original bio in successful cases.
  Even if all bios in the original request are completed by that
  completion, the original request must not be completed yet to keep
  the ordering of request completion for the stacking.
  So end_clone_bio() uses blk_update_request() instead of
  blk_end_request().
  In error cases, end_clone_bio() doesn't complete the original bio.
  It just frees the cloned bio and gives over the error handling to
  end_clone_request().

  end_clone_request(), which is called with queue lock held, completes
  the clone request and the original request in a softirq context
  (dm_softirq_done()), which has no queue lock, to avoid a deadlock
  issue on submission of another request during the completion:
      - The submitted request may be mapped to the same device
      - Request submission requires queue lock, but the queue lock
        has been held by itself and it doesn't know that

  The clone request has no clone bio when dm_softirq_done() is called.
  So target drivers can't resubmit it again even error cases.
  Instead, they can ask dm core for requeueing and remapping
  the original request in that cases.

  suspend
  =======
  Request-based dm uses stopping md->queue as suspend of the md.
  For noflush suspend, just stops md->queue.

  For flush suspend, inserts a marker request to the tail of md->queue.
  And dispatches all requests in md->queue until the marker comes to
  the front of md->queue.  Then, stops dispatching request and waits
  for the all dispatched requests to complete.
  After that, completes the marker request, stops md->queue and
  wake up the waiter on the suspend queue, md->wait.

  resume
  ======
  Starts md->queue.
Signed-off-by: NKiyoshi Ueda <k-ueda@ct.jp.nec.com>
Signed-off-by: NJun'ichi Nomura <j-nomura@ce.jp.nec.com>
Signed-off-by: NAlasdair G Kergon <agk@redhat.com>
      cec47e3d
    • M
      dm: calculate queue limits during resume not load · 754c5fc7
      由 Mike Snitzer 提交于 
      Currently, device-mapper maintains a separate instance of 'struct
queue_limits' for each table of each device.  When the configuration of
a device is to be changed, first its table is loaded and this structure
is populated, then the device is 'resumed' and the calculated
queue_limits are applied.

This places restrictions on how userspace may process related devices,
where it is often advantageous to 'load' tables for several devices
at once before 'resuming' them together.  As the new queue_limits
only take effect after the 'resume', if they are changing and one
device uses another, the latter must be 'resumed' before the former
may be 'loaded'.

This patch moves the calculation of these queue_limits out of
the 'load' operation into 'resume'.  Since we are no longer
pre-calculating this struct, we no longer need to maintain copies
within our dm structs.

dm_set_device_limits() now passes the 'start' of the device's
data area (aka pe_start) as the 'offset' to blk_stack_limits().

init_valid_queue_limits() is replaced by blk_set_default_limits().
Signed-off-by: NMike Snitzer <snitzer@redhat.com>
Cc: martin.petersen@oracle.com
Signed-off-by: NAlasdair G Kergon <agk@redhat.com>
      754c5fc7
    • M
      dm target:s introduce iterate devices fn · af4874e0
      由 Mike Snitzer 提交于 
      Add .iterate_devices to 'struct target_type' to allow a function to be
called for all devices in a DM target.  Implemented it for all targets
except those in dm-snap.c (origin and snapshot).

(The raid1 version number jumps to 1.12 because we originally reserved
1.1 to 1.11 for 'block_on_error' but ended up using 'handle_errors'
instead.)
Signed-off-by: NMike Snitzer <snitzer@redhat.com>
Signed-off-by: NAlasdair G Kergon <agk@redhat.com>
Cc: martin.petersen@oracle.com
      af4874e0
    • M
      dm table: replace struct io_restrictions with struct queue_limits · 5ab97588
      由 Mike Snitzer 提交于 
      Use blk_stack_limits() to stack block limits (including topology) rather
than duplicate the equivalent within Device Mapper.
Signed-off-by: NMike Snitzer <snitzer@redhat.com>
Signed-off-by: NAlasdair G Kergon <agk@redhat.com>
      5ab97588
    • M
      dm: introduce num_flush_requests · f9ab94ce
      由 Mikulas Patocka 提交于 
      Introduce num_flush_requests for a target to set to say how many flush
instructions (empty barriers) it wants to receive.  These are sent by
__clone_and_map_empty_barrier with map_info->flush_request going from 0
to (num_flush_requests - 1).

Old targets without flush support won't receive any flush requests.
Signed-off-by: NMikulas Patocka <mpatocka@redhat.com>
Signed-off-by: NAlasdair G Kergon <agk@redhat.com>
      f9ab94ce
  3. 23 5月, 2009 1 次提交
  5. 09 4月, 2009 1 次提交
  7. 03 4月, 2009 1 次提交
  9. 06 1月, 2009 3 次提交
    • A
      dm: support barriers on simple devices · ab4c1424
      由 Andi Kleen 提交于 
      Implement barrier support for single device DM devices

This patch implements barrier support in DM for the common case of dm linear
just remapping a single underlying device. In this case we can safely
pass the barrier through because there can be no reordering between
devices.

 NB. Any DM device might cease to support barriers if it gets
     reconfigured so code must continue to allow for a possible
     -EOPNOTSUPP on every barrier bio submitted.  - agk
Signed-off-by: NAndi Kleen <ak@suse.de>
Signed-off-by: NMikulas Patocka <mpatocka@redhat.com>
Signed-off-by: NAlasdair G Kergon <agk@redhat.com>
      ab4c1424
    • K
      dm request: extend target interface · 7d76345d
      由 Kiyoshi Ueda 提交于 
      This patch adds the following target interfaces for request-based dm.

  map_rq    : for mapping a request

  rq_end_io : for finishing a request

  busy      : for avoiding performance regression from bio-based dm.
              Target can tell dm core not to map requests now, and
              that may help requests in the block layer queue to be
              bigger by I/O merging.
              In bio-based dm, this behavior is done by device
              drivers managing the block layer queue.
              But in request-based dm, dm core has to do that
              since dm core manages the block layer queue.
Signed-off-by: NKiyoshi Ueda <k-ueda@ct.jp.nec.com>
Signed-off-by: NJun'ichi Nomura <j-nomura@ce.jp.nec.com>
Signed-off-by: NAlasdair G Kergon <agk@redhat.com>
      7d76345d
    • M
      dm: consolidate target deregistration error handling · 10d3bd09
      由 Mikulas Patocka 提交于 
      Change dm_unregister_target to return void and use BUG() for error
reporting.

dm_unregister_target can only fail because of programming bug in the
target driver. It can't fail because of user's behavior or disk errors.

This patch changes unregister_target to return void and use BUG if
someone tries to unregister non-registered target or unregister target
that is in use.

This patch removes code duplication (testing of error codes in all dm
targets) and reports bugs in just one place, in dm_unregister_target. In
some target drivers, these return codes were ignored, which could lead
to a situation where bugs could be missed.
Signed-off-by: NMikulas Patocka <mpatocka@redhat.com>
Signed-off-by: NAlasdair G Kergon <agk@redhat.com>
      10d3bd09
  11. 22 10月, 2008 1 次提交
  13. 21 10月, 2008 2 次提交
  15. 10 10月, 2008 4 次提交
  17. 21 7月, 2008 1 次提交
  19. 30 4月, 2008 1 次提交
  21. 25 4月, 2008 3 次提交
  23. 08 2月, 2008 1 次提交
  25. 21 12月, 2007 1 次提交
  27. 02 11月, 2007 1 次提交
  29. 20 10月, 2007 2 次提交
  31. 09 12月, 2006 3 次提交
    • K
      [PATCH] dm: suspend: add noflush pushback · 2e93ccc1
      由 Kiyoshi Ueda 提交于 
      In device-mapper I/O is sometimes queued within targets for later processing.
For example the multipath target can be configured to store I/O when no paths
are available instead of returning it -EIO.

This patch allows the device-mapper core to instruct a target to transfer the
contents of any such in-target queue back into the core.  This frees up the
resources used by the target so the core can replace that target with an
alternative one and then resend the I/O to it.  Without this patch the only
way to change the target in such circumstances involves returning the I/O with
an error back to the filesystem/application.  In the multipath case, this
patch will let us add new paths for existing I/O to try after all the existing
paths have failed.

    DMF_NOFLUSH_SUSPENDING
    ----------------------

If the DM_NOFLUSH_FLAG ioctl option is specified at suspend time, the
DMF_NOFLUSH_SUSPENDING flag is set in md->flags during dm_suspend().  It
is always cleared before dm_suspend() returns.

The flag must be visible while the target is flushing pending I/Os so it
is set before presuspend where the flush starts and unset after the wait
for md->pending where the flush ends.

Target drivers can check this flag by calling dm_noflush_suspending().

    DM_MAPIO_REQUEUE / DM_ENDIO_REQUEUE
    -----------------------------------

A target's map() function can now return DM_MAPIO_REQUEUE to request the
device mapper core queue the bio.

Similarly, a target's end_io() function can return DM_ENDIO_REQUEUE to request
the same.  This has been labelled 'pushback'.

The __map_bio() and clone_endio() functions in the core treat these return
values as errors and call dec_pending() to end the I/O.

    dec_pending
    -----------

dec_pending() saves the pushback request in struct dm_io->error.  Once all
the split clones have ended, dec_pending() will put the original bio on
the md->pushback list.  Note that this supercedes any I/O errors.

It is possible for the suspend with DM_NOFLUSH_FLAG to be aborted while
in progress (e.g. by user interrupt).  dec_pending() checks for this and
returns -EIO if it happened.

    pushdback list and pushback_lock
    --------------------------------

The bio is queued on md->pushback temporarily in dec_pending(), and after
all pending I/Os return, md->pushback is merged into md->deferred in
dm_suspend() for re-issuing at resume time.

md->pushback_lock protects md->pushback.
The lock should be held with irq disabled because dec_pending() can be
called from interrupt context.

Queueing bios to md->pushback in dec_pending() must be done atomically
with the check for DMF_NOFLUSH_SUSPENDING flag.  So md->pushback_lock is
held when checking the flag.  Otherwise dec_pending() may queue a bio to
md->pushback after the interrupted dm_suspend() flushes md->pushback.
Then the bio would be left in md->pushback.

Flag setting in dm_suspend() can be done without md->pushback_lock because
the flag is checked only after presuspend and the set value is already
made visible via the target's presuspend function.

The flag can be checked without md->pushback_lock (e.g. the first part of
the dec_pending() or target drivers), because the flag is checked again
with md->pushback_lock held when the bio is really queued to md->pushback
as described above.  So even if the flag is cleared after the lockless
checkings, the bio isn't left in md->pushback but returned to applications
with -EIO.

    Other notes on the current patch
    --------------------------------

- md->pushback is added to the struct mapped_device instead of using
  md->deferred directly because md->io_lock which protects md->deferred is
  rw_semaphore and can't be used in interrupt context like dec_pending(),
  and md->io_lock protects the DMF_BLOCK_IO flag of md->flags too.

- Don't issue lock_fs() in dm_suspend() if the DM_NOFLUSH_FLAG
  ioctl option is specified, because I/Os generated by lock_fs() would be
  pushed back and never return if there were no valid devices.

- If an error occurs in dm_suspend() after the DMF_NOFLUSH_SUSPENDING
  flag is set, md->pushback must be flushed because I/Os may be queued to
  the list already.  (flush_and_out label in dm_suspend())

    Test results
    ------------

I have tested using multipath target with the next patch.

The following tests are for regression/compatibility:
  - I/Os succeed when valid paths exist;
  - I/Os fail when there are no valid paths and queue_if_no_path is not
    set;
  - I/Os are queued in the multipath target when there are no valid paths and
    queue_if_no_path is set;
  - The queued I/Os above fail when suspend is issued without the
    DM_NOFLUSH_FLAG ioctl option.  I/Os spanning 2 multipath targets also
    fail.

The following tests are for the normal code path of new pushback feature:
  - Queued I/Os in the multipath target are flushed from the target
    but don't return when suspend is issued with the DM_NOFLUSH_FLAG
    ioctl option;
  - The I/Os above are queued in the multipath target again when
    resume is issued without path recovery;
  - The I/Os above succeed when resume is issued after path recovery
    or table load;
  - Queued I/Os in the multipath target succeed when resume is issued
    with the DM_NOFLUSH_FLAG ioctl option after table load. I/Os
    spanning 2 multipath targets also succeed.

The following tests are for the error paths of the new pushback feature:
  - When the bdget_disk() fails in dm_suspend(), the
    DMF_NOFLUSH_SUSPENDING flag is cleared and I/Os already queued to the
    pushback list are flushed properly.
  - When suspend with the DM_NOFLUSH_FLAG ioctl option is interrupted,
      o I/Os which had already been queued to the pushback list
        at the time don't return, and are re-issued at resume time;
      o I/Os which hadn't been returned at the time return with EIO.
Signed-off-by: NKiyoshi Ueda <k-ueda@ct.jp.nec.com>
Signed-off-by: NJun'ichi Nomura <j-nomura@ce.jp.nec.com>
Signed-off-by: NAlasdair G Kergon <agk@redhat.com>
Cc: dm-devel@redhat.com
Signed-off-by: NAndrew Morton <akpm@osdl.org>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>
      2e93ccc1
    • K
      [PATCH] dm: map and endio return code clarification · 45cbcd79
      由 Kiyoshi Ueda 提交于 
      Tighten the use of return values from the target map and end_io functions.
Values of 2 and above are now explictly reserved for future use.  There are no
existing targets using such values.

The patch has no effect on existing behaviour.

o Reserve return values of 2 and above from target map functions.
  Any positive value currently indicates "mapping complete", but all
  existing drivers use the value 1.  We now make that a requirement
  so we can assign new meaning to higher values in future.

  The new definition of return values from target map functions is:
      < 0 : error
      = 0 : The target will handle the io (DM_MAPIO_SUBMITTED).
      = 1 : Mapping completed (DM_MAPIO_REMAPPED).
      > 1 : Reserved (undefined).  Previously this was the same as '= 1'.

o Reserve return values of 2 and above from target end_io functions
  for similar reasons.
  DM_ENDIO_INCOMPLETE is introduced for a return value of 1.

Test results:

  I have tested by using the multipath target.

  I/Os succeed when valid paths exist.

  I/Os are queued in the multipath target when there are no valid paths and
queue_if_no_path is set.

  I/Os fail when there are no valid paths and queue_if_no_path is not set.
Signed-off-by: NKiyoshi Ueda <k-ueda@ct.jp.nec.com>
Signed-off-by: NJun'ichi Nomura <j-nomura@ce.jp.nec.com>
Signed-off-by: NAlasdair G Kergon <agk@redhat.com>
Cc: dm-devel@redhat.com
Signed-off-by: NAndrew Morton <akpm@osdl.org>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>
      45cbcd79
    • K
      [PATCH] dm: suspend: parameter change · a3d77d35
      由 Kiyoshi Ueda 提交于 
      Change the interface of dm_suspend() so that we can pass several options
without increasing the number of parameters.  The existing 'do_lockfs' integer
parameter is replaced by a flag DM_SUSPEND_LOCKFS_FLAG.

There is no functional change to the code.

Test results:
I have tested 'dmsetup suspend' command with/without the '--nolockfs'
option and confirmed the do_lockfs value is correctly set.
Signed-off-by: NKiyoshi Ueda <k-ueda@ct.jp.nec.com>
Signed-off-by: NJun'ichi Nomura <j-nomura@ce.jp.nec.com>
Signed-off-by: NAlasdair G Kergon <agk@redhat.com>
Cc: dm-devel@redhat.com
Signed-off-by: NAndrew Morton <akpm@osdl.org>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>
      a3d77d35
  33. 03 10月, 2006 4 次提交
  35. 27 6月, 2006 3 次提交
  37. 28 3月, 2006 1 次提交
  39. 02 2月, 2006 1 次提交