- 12 3月, 2018 5 次提交
-
-
由 Christoph Hellwig 提交于
Use the VFS dirty inode tracking for lazytime inodes only, and just log them in ->dirty_inode. Signed-off-by: NChristoph Hellwig <hch@lst.de> Reviewed-by: NDave Chinner <dchinner@redhat.com> Reviewed-by: NDarrick J. Wong <darrick.wong@oracle.com> Signed-off-by: NDarrick J. Wong <darrick.wong@oracle.com>
-
由 Nikolay Borisov 提交于
The memcpy is guarded by a check which is performed a right before we call xfs_log_dinode_to_disk. At this point we are sure this check will always be false otherwise we would have errored out. So let's remove this dead weight. Signed-off-by: NNikolay Borisov <nborisov@suse.com> Reviewed-by: NCarlos Maiolino <cmaiolino@redhat.com> Reviewed-by: NDarrick J. Wong <darrick.wong@oracle.com> Signed-off-by: NDarrick J. Wong <darrick.wong@oracle.com>
-
由 Carlos Maiolino 提交于
Remove unused legacy btree traces from IRIX era. Signed-off-by: NCarlos Maiolino <cmaiolino@redhat.com> Reviewed-by: NDarrick J. Wong <darrick.wong@oracle.com> Signed-off-by: NDarrick J. Wong <darrick.wong@oracle.com>
-
由 Eric Sandeen 提交于
The dmevmask structure member is a dmapi leftover; it's set here and there but never actually used. Remove it. Signed-off-by: NEric Sandeen <sandeen@redhat.com> Reviewed-by: NBill O'Donnell <billodo@redhat.com> Reviewed-by: NDarrick J. Wong <darrick.wong@oracle.com> Signed-off-by: NDarrick J. Wong <darrick.wong@oracle.com>
-
由 Dave Chinner 提交于
When using large directory blocks, we regularly see memory allocations of >64k being made for the shadow log vector buffer. When we are under memory pressure, kmalloc() may not be able to find contiguous memory chunks large enough to satisfy these allocations easily, and if memory is fragmented we can potentially stall here. TO avoid this problem, switch the log vector buffer allocation to use kmem_alloc_large(). This will allow failed allocations to fall back to vmalloc and so remove the dependency on large contiguous regions of memory being available. This should prevent slowdowns and potential stalls when memory is low and/or fragmented. Signed-Off-By: NDave Chinner <dchinner@redhat.com> Reviewed-by: NDarrick J. Wong <darrick.wong@oracle.com> Signed-off-by: NDarrick J. Wong <darrick.wong@oracle.com>
-
- 02 3月, 2018 3 次提交
-
-
由 Christoph Hellwig 提交于
Fix xfs_file_iomap_begin to trylock the ilock if IOMAP_NOWAIT is passed, so that we don't block io_submit callers. Signed-off-by: NChristoph Hellwig <hch@lst.de> Reviewed-by: NDave Chinner <dchinner@redhat.com> Reviewed-by: NDarrick J. Wong <darrick.wong@oracle.com> Signed-off-by: NDarrick J. Wong <darrick.wong@oracle.com>
-
由 Christoph Hellwig 提交于
There is no reason to take the ilock exclusively at the start of xfs_file_iomap_begin for direct I/O, given that it will be demoted just before calling xfs_iomap_write_direct anyway. Signed-off-by: NChristoph Hellwig <hch@lst.de> Reviewed-by: NDave Chinner <dchinner@redhat.com> Reviewed-by: NDarrick J. Wong <darrick.wong@oracle.com> Signed-off-by: NDarrick J. Wong <darrick.wong@oracle.com>
-
由 Christoph Hellwig 提交于
The iomap zeroing interface is smart enough to skip zeroing holes or unwritten extents. Don't subvert this logic for reflink files. Signed-off-by: NChristoph Hellwig <hch@lst.de> Reviewed-by: NDave Chinner <dchinner@redhat.com> Reviewed-by: NDarrick J. Wong <darrick.wong@oracle.com> Signed-off-by: NDarrick J. Wong <darrick.wong@oracle.com>
-
- 27 2月, 2018 1 次提交
-
-
由 Chengguang Xu 提交于
When specifying string type mount option (e.g., logdev) several times in a mount, current option parsing may cause memory leak. Hence, call kfree for previous one in this case. Signed-off-by: NChengguang Xu <cgxu519@icloud.com> Reviewed-by: NEric Sandeen <sandeen@redhat.com> Reviewed-by: NDarrick J. Wong <darrick.wong@oracle.com> Signed-off-by: NDarrick J. Wong <darrick.wong@oracle.com>
-
- 23 2月, 2018 2 次提交
-
-
由 Darrick J. Wong 提交于
During log recovery, the per-AG reservations aren't yet set up, so log recovery has to reserve enough blocks to handle all possible btree splits. Reported-by: NDave Chinner <david@fromorbit.com> Signed-off-by: NDarrick J. Wong <darrick.wong@oracle.com> Reviewed-by: NDave Chinner <dchinner@redhat.com>
-
由 Eric Sandeen 提交于
Apparently different gcc versions have competing and incompatible notions of how to initialize at declaration, so just give up and fall back to the time-tested memset(). Signed-off-by: NEric Sandeen <sandeen@redhat.com> Reviewed-by: NDarrick J. Wong <darrick.wong@oracle.com> Signed-off-by: NDarrick J. Wong <darrick.wong@oracle.com>
-
- 02 2月, 2018 4 次提交
-
-
由 Darrick J. Wong 提交于
Reverse mapping has had a while to soak, so remove the experimental tag. Now that we've landed space metadata cross-referencing in scrub, the feature actually has a purpose. Reject rmap filesystems with an rt device until the code to support it is actually implemented. Signed-off-by: NDarrick J. Wong <darrick.wong@oracle.com> Reviewed-by: NDave Chinner <dchinner@redhat.com> Reviewed-by: NBill O'Donnell <billodo@redhat.com>
-
由 Darrick J. Wong 提交于
We don't support realtime filesystems with reflink either, so fail those mounts. Signed-off-by: NDarrick J. Wong <darrick.wong@oracle.com> Reviewed-by: NBill O'Donnell <billodo@redhat.com>
-
由 Darrick J. Wong 提交于
Now that reflink is no longer experimental, reject attempts to mount with DAX until that whole mess gets sorted out. Signed-off-by: NDarrick J. Wong <darrick.wong@oracle.com> Reviewed-by: NBill O'Donnell <billodo@redhat.com> Reviewed-by: NDave Chinner <dchinner@redhat.com>
-
由 Eric Sandeen 提交于
Advertise this config option along with the others. Signed-off-by: NEric Sandeen <sandeen@redhat.com> Reviewed-by: NDarrick J. Wong <darrick.wong@oracle.com> Signed-off-by: NDarrick J. Wong <darrick.wong@oracle.com>
-
- 01 2月, 2018 1 次提交
-
-
由 Darrick J. Wong 提交于
Don't use u32, use uint32_t, because this won't work in xfsprogs. Signed-off-by: NDarrick J. Wong <darrick.wong@oracle.com> Reviewed-by: NEric Sandeen <sandeen@redhat.com>
-
- 29 1月, 2018 21 次提交
-
-
由 Christoph Hellwig 提交于
But reject reflink + DAX file systems for now until the code to support reflinks on DAX is actually implemented. Signed-off-by: NChristoph Hellwig <hch@lst.de> Reviewed-by: NDarrick J. Wong <darrick.wong@oracle.com> [darrick: port to 4.16] Signed-off-by: NDarrick J. Wong <darrick.wong@oracle.com>
-
由 Darrick J. Wong 提交于
xfs_bmap_btalloc is given a range of file offset blocks that must be allocated to some data/attr/cow fork. If the fork has an extent size hint associated with it, the request will be enlarged on both ends to try to satisfy the alignment hint. If free space is fragmentated, sometimes we can allocate some blocks but not enough to fulfill any of the requested range. Since bmapi_allocate always trims the new extent mapping to match the originally requested range, this results in bmapi_write returning zero and no mapping. The consequences of this vary -- buffered writes will simply re-call bmapi_write until it can satisfy at least one block from the original request. Direct IO overwrites notice nmaps == 0 and return -ENOSPC through the dio mechanism out to userspace with the weird result that writes fail even when we have enough space because the ENOSPC return overrides any partial write status. For direct CoW writes the situation was disastrous because nobody notices us returning an invalid zero-length wrong-offset mapping to iomap and the write goes off into space. Therefore, if free space is so fragmented that we managed to allocate some space but not enough to map into even a single block of the original allocation request range, we should break the alignment hint in order to guarantee at least some forward progress for the direct write. If we return a short allocation to iomap_apply it'll call back about the remaining blocks. Signed-off-by: NDarrick J. Wong <darrick.wong@oracle.com> Reviewed-by: NChristoph Hellwig <hch@lst.de>
-
由 Darrick J. Wong 提交于
There's a really bad bug in xfs_reflink_allocate_cow -- if bmapi_write can return a zero error code but no mappings. This happens if there's an extent size hint (which causes allocation requests to be rounded to extsz granularity internally), but there wasn't a big enough chunk of free space to start filling at the extsz granularity and fill even one block of the range that we actually requested. In any case, if we got no mappings we can't possibly do anything useful with the contents of imap, so we must bail out with ENOSPC here. Signed-off-by: NDarrick J. Wong <darrick.wong@oracle.com> Reviewed-by: NChristoph Hellwig <hch@lst.de>
-
由 Darrick J. Wong 提交于
Since the CoW fork only exists in memory, it is incorrect to update the on-disk quota block counts when we modify the CoW fork. Unlike the data fork, even real extents in the CoW fork are only delalloc-style reservations (on-disk they're owned by the refcountbt) so they must not be tracked in the on disk quota info. Ensure the i_delayed_blks accounting reflects this too. Signed-off-by: NDarrick J. Wong <darrick.wong@oracle.com> Reviewed-by: NChristoph Hellwig <hch@lst.de>
-
由 Darrick J. Wong 提交于
Reflink and dedupe operations remap blocks from a source file into a destination file. The destination file needs exclusive locks on all levels because we're updating its block map, but the source file isn't undergoing any block map changes so we can use a shared lock. Signed-off-by: NDarrick J. Wong <darrick.wong@oracle.com> Reviewed-by: NChristoph Hellwig <hch@lst.de>
-
由 Darrick J. Wong 提交于
Refactor xfs_lock_two_inodes to take separate locking modes for each inode. Specifically, this enables us to take a SHARED lock on one inode and an EXCL lock on the other. The lock class (MMAPLOCK/ILOCK) must be the same for each inode. Signed-off-by: NDarrick J. Wong <darrick.wong@oracle.com> Reviewed-by: NChristoph Hellwig <hch@lst.de>
-
由 Darrick J. Wong 提交于
Before we share blocks between files, we need to break the pnfs leases on the layout before we start slicing and dicing the block map. The structure of this function sets us up for the lock contention reduction in the next patch. Signed-off-by: NDarrick J. Wong <darrick.wong@oracle.com> Reviewed-by: NBrian Foster <bfoster@redhat.com> Reviewed-by: NChristoph Hellwig <hch@lst.de>
-
由 Darrick J. Wong 提交于
Even if we can't use the inobt/finobt cursors to count the number of inode btree blocks, we are never allowed to clobber the cursor of the btree being checked, so don't do this. Found by fuzzing level = ones in xfs/364. Signed-off-by: NDarrick J. Wong <darrick.wong@oracle.com> Reviewed-by: NChristoph Hellwig <hch@lst.de>
-
由 Darrick J. Wong 提交于
Every so often we blow the ASSERT(type != XFS_IO_COW) in xfs_map_blocks when running fsstress, as we do in generic/269. The cause of this is writeback racing with truncate -- writeback doesn't take the iolock, so truncate can sneak in to decrease i_size and truncate page cache while writeback is gathering buffer heads to schedule writeout. If we hit this race on a block that has a CoW mapping, we'll get a valid imap from the CoW fork but the reduced i_size trims the mapping to zero length (which makes it invalid), so we call xfs_map_blocks to try again. This doesn't do much anyway, since any mapping we get out of that will also be invalid, so we might as well skip the assert and just stop. Signed-off-by: NDarrick J. Wong <darrick.wong@oracle.com> Reviewed-by: NChristoph Hellwig <hch@lst.de>
-
由 Amir Goldstein 提交于
Commit 66f36464 ("xfs: remove if_rdev") moved storing of rdev value for special inodes to VFS inodes, but forgot to preserve the value of i_rdev when recycling a reclaimable xfs_inode. This was detected by xfstest overlay/017 with inodex=on mount option and xfs base fs. The test does a lookup of overlay chardev and blockdev right after drop caches. Overlayfs inodes hold a reference on underlying xfs inodes when mount option index=on is configured. If drop caches reclaim xfs inodes, before it relclaims overlayfs inodes, that can sometimes leave a reclaimable xfs inode and that test hits that case quite often. When that happens, the xfs inode cache remains broken (zere i_rdev) until the next cycle mount or drop caches. Fixes: 66f36464 ("xfs: remove if_rdev") Signed-off-by: NAmir Goldstein <amir73il@gmail.com> Reviewed-by: NChristoph Hellwig <hch@lst.de> Reviewed-by: NDarrick J. Wong <darrick.wong@oracle.com> Signed-off-by: NDarrick J. Wong <darrick.wong@oracle.com>
-
由 Darrick J. Wong 提交于
Move all the inode and quota accounting updates out of xfs_bmap_btalloc in preparation for fixing some quota accounting problems with copy on write. Signed-off-by: NDarrick J. Wong <darrick.wong@oracle.com> Reviewed-by: NChristoph Hellwig <hch@lst.de> Reviewed-by: NBrian Foster <bfoster@redhat.com>
-
由 Darrick J. Wong 提交于
Refactor inode verifier error reporting into a non-libxfs function so that we aren't encoding the message format in libxfs. This also changes the kernel dmesg output to resemble buffer verifier errors more closely. Signed-off-by: NDarrick J. Wong <darrick.wong@oracle.com> Reviewed-by: NBrian Foster <bfoster@redhat.com> Reviewed-by: NChristoph Hellwig <hch@lst.de>
-
由 Darrick J. Wong 提交于
Fix all the inode number formats to be consistently (0x%llx) in all trace point definitions. Signed-off-by: NDarrick J. Wong <darrick.wong@oracle.com> Reviewed-by: NBrian Foster <bfoster@redhat.com> Reviewed-by: NChristoph Hellwig <hch@lst.de>
-
由 Darrick J. Wong 提交于
Always zero the di_flags2 field when we free the inode so that we never end up with an on-disk record for an unallocated inode that also has the reflink iflag set. This is in keeping with the general principle that only files can have the reflink iflag set, even though we'll zero out di_flags2 if we ever reallocate the inode. Signed-off-by: NDarrick J. Wong <darrick.wong@oracle.com> Reviewed-by: NBrian Foster <bfoster@redhat.com> Reviewed-by: NChristoph Hellwig <hch@lst.de>
-
由 Darrick J. Wong 提交于
Ensure that we've attached all the necessary dquots before performing reflink operations so that quota accounting is accurate. Signed-off-by: NDarrick J. Wong <darrick.wong@oracle.com> Reviewed-by: NBrian Foster <bfoster@redhat.com> Reviewed-by: NChristoph Hellwig <hch@lst.de>
-
由 Shan Hai 提交于
Remove the extent size hint and realtime inode relevant code from the xfs_bmapi_reserve_delalloc since it is not called on the inode with extent size hint set or on a realtime inode. Signed-off-by: NShan Hai <shan.hai@oracle.com> Reviewed-by: NDarrick J. Wong <darrick.wong@oracle.com> Signed-off-by: NDarrick J. Wong <darrick.wong@oracle.com>
-
由 Carlos Maiolino 提交于
Now that buffer's b_fspriv has been split, just replace the current singly linked list of xfs_log_items, by the list_head infrastructure. Also, remove the xfs_log_item argument from xfs_buf_resubmit_failed_buffers(), there is no need for this argument, once the log items can be walked through the list_head in the buffer. Signed-off-by: NCarlos Maiolino <cmaiolino@redhat.com> Reviewed-by: NBill O'Donnell <billodo@redhat.com> Reviewed-by: NDarrick J. Wong <darrick.wong@oracle.com> [darrick: minor style cleanups] Signed-off-by: NDarrick J. Wong <darrick.wong@oracle.com>
-
由 Carlos Maiolino 提交于
By splitting the b_fspriv field into two different fields (b_log_item and b_li_list). It's possible to get rid of an old ABI workaround, by using the new b_log_item field to store xfs_buf_log_item separated from the log items attached to the buffer, which will be linked in the new b_li_list field. This way, there is no more need to reorder the log items list to place the buf_log_item at the beginning of the list, simplifying a bit the logic to handle buffer IO. This also opens the possibility to change buffer's log items list into a proper list_head. b_log_item field is still defined as a void *, because it is still used by the log buffers to store xlog_in_core structures, and there is no need to add an extra field on xfs_buf just for xlog_in_core. Signed-off-by: NCarlos Maiolino <cmaiolino@redhat.com> Reviewed-by: NBill O'Donnell <billodo@redhat.com> Reviewed-by: NDarrick J. Wong <darrick.wong@oracle.com> [darrick: minor style changes] Signed-off-by: NDarrick J. Wong <darrick.wong@oracle.com>
-
由 Carlos Maiolino 提交于
Take advantage of the rework on xfs_buf log items list, to get rid of ths typedef for xfs_buf_log_item. This patch also fix some indentation alignment issues found along the way. Signed-off-by: NCarlos Maiolino <cmaiolino@redhat.com> Reviewed-by: NBill O'Donnell <billodo@redhat.com> Reviewed-by: NDarrick J. Wong <darrick.wong@oracle.com> Signed-off-by: NDarrick J. Wong <darrick.wong@oracle.com>
-
由 Jeff Layton 提交于
If XFS_ILOG_CORE is already set then go ahead and increment it. Signed-off-by: NJeff Layton <jlayton@redhat.com> Acked-by: NDarrick J. Wong <darrick.wong@oracle.com> Acked-by: NDave Chinner <dchinner@redhat.com>
-
由 Jeff Layton 提交于
Signed-off-by: NJeff Layton <jlayton@redhat.com> Acked-by: NDarrick J. Wong <darrick.wong@oracle.com> Acked-by: NDave Chinner <dchinner@redhat.com>
-
- 18 1月, 2018 3 次提交
-
-
由 Darrick J. Wong 提交于
Fix compiler warning on non-debug build Signed-off-by: NDarrick J. Wong <darrick.wong@oracle.com> Reviewed-by: NDave Chinner <dchinner@redhat.com>
-
由 Darrick J. Wong 提交于
Currently, we don't check sb_agblocks or sb_agblklog when we validate the superblock, which means that we can fuzz garbage values into those values and the mount succeeds. This leads to all sorts of UBSAN warnings in xfs/350 since we can then coerce other parts of xfs into shifting by ridiculously large values. Once we've validated agblocks, make sure the agcount makes sense. Signed-off-by: NDarrick J. Wong <darrick.wong@oracle.com> Reviewed-by: NBrian Foster <bfoster@redhat.com>
-
由 Darrick J. Wong 提交于
Eryu Guan reported seeing occasional hangs when running generic/269 with a new fsstress that supports clonerange/deduperange. The cause of this hang is an infinite loop when we convert the CoW fork extents from unwritten to real just prior to writing the pages out; the infinite loop happens because there's nothing in the CoW fork to convert, and so it spins forever. The fundamental issue here is that when we go to perform these CoW fork conversions, we're supposed to have an extent waiting for us, but the low space CoW reaper has snuck in and blown them away! There are four conditions that can dissuade the reaper from touching our file -- no reflink iflag; dirty page cache; writeback in progress; or directio in progress. We check the four conditions prior to taking the locks, but we neglect to recheck them once we have the locks, which is how we end up whacking the writeback that's in progress. Therefore, refactor the four checks into a helper function and call it once again once we have the locks to make sure we really want to reap the inode. While we're at it, add an ASSERT for this weird condition so that we'll fail noisily if we ever screw this up again. Reported-by: NEryu Guan <eguan@redhat.com> Signed-off-by: NDarrick J. Wong <darrick.wong@oracle.com> Tested-by: NEryu Guan <eguan@redhat.com> Reviewed-by: NBrian Foster <bfoster@redhat.com>
-