Pull ftrace self-test updates from Steven Rostedt:
 "Updates for the ftrace self tests:

   - Added kprobes on ftrace testcase
   - Sort test cases
   - Add file to hold helper functions
   - Use logfile name supported by busybox's mktemp
   - Clear trace buffer after running kprobe test
   - Fix show descriptions when run on dash shell
   - Add --verbose option for showing echo output"

* tag 'ftracetest-3.19' of git://git.kernel.org/pub/scm/linux/kernel/git/rostedt/linux-trace:
  ftracetest: Add --verbose option for showing echo output
  ftracetest: Fix to show descriptions on dash
  ftracetest: Add basic event tracing test cases
  ftracetest: Clear trace buffer after running kprobe testcases
  ftracetest: Use logfile name supported by busybox's mktemp
  ftracetest: Add a couple of ftrace test cases
  ftracetest: Add functions file that holds helper functions
  ftracetest: Sort testcases
  ftracetest: Add kprobes on ftrace testcase

Pull tracing updates from Steven Rostedt:
 "There was a lot of clean ups and minor fixes.  One of those clean ups
  was to the trace_seq code.  It also removed the return values to the
  trace_seq_*() functions and use trace_seq_has_overflowed() to see if
  the buffer filled up or not.  This is similar to work being done to
  the seq_file code as well in another tree.

  Some of the other goodies include:

   - Added some "!" (NOT) logic to the tracing filter.

   - Fixed the frame pointer logic to the x86_64 mcount trampolines

   - Added the logic for dynamic trampolines on !CONFIG_PREEMPT systems.
     That is, the ftrace trampoline can be dynamically allocated and be
     called directly by functions that only have a single hook to them"

* tag 'trace-3.19' of git://git.kernel.org/pub/scm/linux/kernel/git/rostedt/linux-trace: (55 commits)
  tracing: Truncated output is better than nothing
  tracing: Add additional marks to signal very large time deltas
  Documentation: describe trace_buf_size parameter more accurately
  tracing: Allow NOT to filter AND and OR clauses
  tracing: Add NOT to filtering logic
  ftrace/fgraph/x86: Have prepare_ftrace_return() take ip as first parameter
  ftrace/x86: Get rid of ftrace_caller_setup
  ftrace/x86: Have save_mcount_regs macro also save stack frames if needed
  ftrace/x86: Add macro MCOUNT_REG_SIZE for amount of stack used to save mcount regs
  ftrace/x86: Simplify save_mcount_regs on getting RIP
  ftrace/x86: Have save_mcount_regs store RIP in %rdi for first parameter
  ftrace/x86: Rename MCOUNT_SAVE_FRAME and add more detailed comments
  ftrace/x86: Move MCOUNT_SAVE_FRAME out of header file
  ftrace/x86: Have static tracing also use ftrace_caller_setup
  ftrace/x86: Have static function tracing always test for function graph
  kprobes: Add IPMODIFY flag to kprobe_ftrace_ops
  ftrace, kprobes: Support IPMODIFY flag to find IP modify conflict
  kprobes/ftrace: Recover original IP if pre_handler doesn't change it
  tracing/trivial: Fix typos and make an int into a bool
  tracing: Deletion of an unnecessary check before iput()
  ...

Merge first patchbomb from Andrew Morton:
 - a few minor cifs fixes
 - dma-debug upadtes
 - ocfs2
 - slab
 - about half of MM
 - procfs
 - kernel/exit.c
 - panic.c tweaks
 - printk upates
 - lib/ updates
 - checkpatch updates
 - fs/binfmt updates
 - the drivers/rtc tree
 - nilfs
 - kmod fixes
 - more kernel/exit.c
 - various other misc tweaks and fixes

* emailed patches from Andrew Morton <akpm@linux-foundation.org>: (190 commits)
  exit: pidns: fix/update the comments in zap_pid_ns_processes()
  exit: pidns: alloc_pid() leaks pid_namespace if child_reaper is exiting
  exit: exit_notify: re-use "dead" list to autoreap current
  exit: reparent: call forget_original_parent() under tasklist_lock
  exit: reparent: avoid find_new_reaper() if no children
  exit: reparent: introduce find_alive_thread()
  exit: reparent: introduce find_child_reaper()
  exit: reparent: document the ->has_child_subreaper checks
  exit: reparent: s/while_each_thread/for_each_thread/ in find_new_reaper()
  exit: reparent: fix the cross-namespace PR_SET_CHILD_SUBREAPER reparenting
  exit: reparent: fix the dead-parent PR_SET_CHILD_SUBREAPER reparenting
  exit: proc: don't try to flush /proc/tgid/task/tgid
  exit: release_task: fix the comment about group leader accounting
  exit: wait: drop tasklist_lock before psig->c* accounting
  exit: wait: don't use zombie->real_parent
  exit: wait: cleanup the ptrace_reparented() checks
  usermodehelper: kill the kmod_thread_locker logic
  usermodehelper: don't use CLONE_VFORK for ____call_usermodehelper()
  fs/hfs/catalog.c: fix comparison bug in hfs_cat_keycmp
  nilfs2: fix the nilfs_iget() vs. nilfs_new_inode() races
  ...

The comments in zap_pid_ns_processes() are not clear, we need to explain
how this code actually works.

1. "Ignore SIGCHLD" looks like optimization but it is not, we also
   need this for correctness.

2. The comment above sys_wait4() could tell more.

   EXIT_ZOMBIE child is only possible if it has exited before we
   ignored SIGCHLD. Or if it is traced from the parent namespace,
   but in this case it will be reaped by debugger after detach,
   sys_wait4() acts as a synchronization point.

3. The comment about TASK_DEAD (EXIT_DEAD in fact) children is
   outdated. Contrary to what it says we do not need to make sure
   they all go away after 0a01f2cc "pidns: Make the pidns proc
   mount/umount logic obvious".

   At the same time, we do need to wait for nr_hashed==init_pids,
   but the reasons are quite different and not obvious: setns().
Signed-off-by: NOleg Nesterov <oleg@redhat.com>
Cc: "Eric W. Biederman" <ebiederm@xmission.com>
Cc: Aaron Tomlin <atomlin@redhat.com>
Cc: Pavel Emelyanov <xemul@parallels.com>
Cc: Serge Hallyn <serge.hallyn@ubuntu.com>
Cc: Sterling Alexander <stalexan@redhat.com>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

alloc_pid() does get_pid_ns() beforehand but forgets to put_pid_ns() if it
fails because disable_pid_allocation() was called by the exiting
child_reaper.

We could simply move get_pid_ns() down to successful return, but this fix
tries to be as trivial as possible.
Signed-off-by: NOleg Nesterov <oleg@redhat.com>
Reviewed-by: N"Eric W. Biederman" <ebiederm@xmission.com>
Cc: Aaron Tomlin <atomlin@redhat.com>
Cc: Pavel Emelyanov <xemul@parallels.com>
Cc: Serge Hallyn <serge.hallyn@ubuntu.com>
Cc: Sterling Alexander <stalexan@redhat.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

After the previous change we can add just the exiting EXIT_DEAD task to
the "dead" list and remove another release_task(tsk).
Signed-off-by: NOleg Nesterov <oleg@redhat.com>
Cc: Aaron Tomlin <atomlin@redhat.com>
Cc: "Eric W. Biederman" <ebiederm@xmission.com>
Cc: Sterling Alexander <stalexan@redhat.com>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

Shift "release dead children" loop from forget_original_parent() to its
caller, exit_notify().  It is safe to reap them even if our parent reaps
us right after we drop tasklist_lock, those children no longer have any
connection to the exiting task.

And this allows us to avoid write_lock_irq(tasklist_lock) right after it
was released by forget_original_parent(), we can simply call it with
tasklist_lock held.

While at it, move the comment about forget_original_parent() up to
this function.
Signed-off-by: NOleg Nesterov <oleg@redhat.com>
Cc: Aaron Tomlin <atomlin@redhat.com>
Cc: "Eric W. Biederman" <ebiederm@xmission.com>
Cc: Sterling Alexander <stalexan@redhat.com>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

Now that pid_ns logic was isolated we can change forget_original_parent()
to return right after find_child_reaper() when father->children is empty,
there is nothing to reparent in this case.

In particular this avoids find_alive_thread() and this can help if the
whole process exits and it has a lot of PF_EXITING threads at the start of
the thread list, this can easily lead to O(nr_threads ** 2) iterations.

Trivial test case (tested under KVM, 2 CPUs):

    static void *tfunc(void *arg)
    {
        pause();
        return NULL;
    }

    static int child(unsigned int nt)
    {
        pthread_t pt;

        while (nt--)
            assert(pthread_create(&pt, NULL, tfunc, NULL) == 0);

        pthread_kill(pt, SIGTRAP);
        pause();
        return 0;
    }

    int main(int argc, const char *argv[])
    {
        int stat;
        unsigned int nf = atoi(argv[1]);
        unsigned int nt = atoi(argv[2]);

        while (nf--) {
            if (!fork())
                return child(nt);

            wait(&stat);
            assert(stat == SIGTRAP);
        }

        return 0;
    }

$ time ./test 16 16536 shows:

              real        user         sys
    -    5m37.628s    0m4.437s    8m5.560s
    +    0m50.032s    0m7.130s    1m4.927s
Signed-off-by: NOleg Nesterov <oleg@redhat.com>
Cc: Aaron Tomlin <atomlin@redhat.com>
Cc: "Eric W. Biederman" <ebiederm@xmission.com>
Cc: Sterling Alexander <stalexan@redhat.com>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

Add the new simple helper to factor out the for_each_thread() code in
find_child_reaper() and find_new_reaper().  It can also simplify the
potential PF_EXITING -> exit_state change, plus perhaps we can change this
code to take SIGNAL_GROUP_EXIT into account.
Signed-off-by: NOleg Nesterov <oleg@redhat.com>
Cc: Aaron Tomlin <atomlin@redhat.com>
Cc: "Eric W. Biederman" <ebiederm@xmission.com>
Cc: Kay Sievers <kay@vrfy.org>
Cc: Lennart Poettering <lennart@poettering.net>
Cc: Sterling Alexander <stalexan@redhat.com>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

find_new_reaper() does 2 completely different things.  Not only it finds a
reaper, it also updates pid_ns->child_reaper or kills the whole namespace
if the caller is ->child_reaper.

Now that has_child_subreaper logic doesn't depend on child_reaper check we
can move that pid_ns code into a separate helper.  IMHO this makes the
code more clean, and this allows the next changes.
Signed-off-by: NOleg Nesterov <oleg@redhat.com>
Cc: Aaron Tomlin <atomlin@redhat.com>
Cc: "Eric W. Biederman" <ebiederm@xmission.com>
Cc: Kay Sievers <kay@vrfy.org>
Cc: Lennart Poettering <lennart@poettering.net>
Cc: Sterling Alexander <stalexan@redhat.com>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

Swap the "init_task" and same_thread_group() checks.  This way it is more
simple to document these checks and we can remove the link to the previous
discussion on lkml.
Signed-off-by: NOleg Nesterov <oleg@redhat.com>
Cc: Aaron Tomlin <atomlin@redhat.com>
Cc: "Eric W. Biederman" <ebiederm@xmission.com>
Cc: Kay Sievers <kay@vrfy.org>
Cc: Lennart Poettering <lennart@poettering.net>
Cc: Sterling Alexander <stalexan@redhat.com>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

Change find_new_reaper() to use for_each_thread() instead of deprecated
while_each_thread().  We do not bother to check "thread != father" in the
1st loop, we can rely on PF_EXITING check.

Note: this means the minor behavioural change: for_each_thread() starts
from the group leader.  But this should be fine, nobody should make any
assumption about do_wait(__WNOTHREAD) when it comes to reparented tasks.
And this can avoid the pointless reparenting to a short-living thread
While zombie leaders are not that common.
Signed-off-by: NOleg Nesterov <oleg@redhat.com>
Cc: Aaron Tomlin <atomlin@redhat.com>
Cc: "Eric W. Biederman" <ebiederm@xmission.com>
Cc: Kay Sievers <kay@vrfy.org>
Cc: Lennart Poettering <lennart@poettering.net>
Cc: Sterling Alexander <stalexan@redhat.com>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

find_new_reaper() assumes that "has_child_subreaper" logic is safe as
long as we are not the exiting ->child_reaper and this is doubly wrong:

1. In fact it is safe if "pid_ns->child_reaper == father"; there must
   be no children after zap_pid_ns_processes() returns, so it doesn't
   matter what we return in this case and even pid_ns->child_reaper is
   wrong otherwise: we can't reparent to ->child_reaper == current.

   This is not a bug, but this is confusing.

2. It is not safe if we are not pid_ns->child_reaper but from the same
   thread group. We drop tasklist_lock before zap_pid_ns_processes(),
   so another thread can lock it and choose the new reaper from the
   upper namespace if has_child_subreaper == T, and this is obviously
   wrong.

   This is not that bad, zap_pid_ns_processes() won't return until the
   the new reaper reaps all zombies, but this should be fixed anyway.

We could change for_each_thread() loop to use ->exit_state instead of
PF_EXITING which we had to use until 8aac6270, or we could change
copy_signal() to check CLONE_NEWPID before setting has_child_subreaper,
but lets change this code so that it is clear we can't look outside of
our namespace, otherwise same_thread_group(reaper, child_reaper) check
will look wrong and confusing anyway.

We can simply start from "father" and fix the problem. We can't wrongly
return a thread from the same thread group if ->is_child_subreaper == T,
we know that all threads have PF_EXITING set.
Signed-off-by: NOleg Nesterov <oleg@redhat.com>
Cc: Aaron Tomlin <atomlin@redhat.com>
Cc: "Eric W. Biederman" <ebiederm@xmission.com>
Cc: Kay Sievers <kay@vrfy.org>
Cc: Lennart Poettering <lennart@poettering.net>
Cc: Sterling Alexander <stalexan@redhat.com>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

The ->has_child_subreaper code in find_new_reaper() finds alive "thread"
but returns another "reaper" thread which can be dead.
Signed-off-by: NOleg Nesterov <oleg@redhat.com>
Cc: Aaron Tomlin <atomlin@redhat.com>
Cc: "Eric W. Biederman" <ebiederm@xmission.com>
Cc: Kay Sievers <kay@vrfy.org>
Cc: Lennart Poettering <lennart@poettering.net>
Cc: Sterling Alexander <stalexan@redhat.com>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

proc_flush_task_mnt() always tries to flush task/pid, but this is
pointless if we reap the leader. d_invalidate() is recursive, and
if nothing else the next d_hash_and_lookup(tgid) should fail anyway.
Signed-off-by: NOleg Nesterov <oleg@redhat.com>
Cc: Aaron Tomlin <atomlin@redhat.com>
Cc: "Eric W. Biederman" <ebiederm@xmission.com>
Cc: Rik van Riel <riel@redhat.com>
Cc: Sterling Alexander <stalexan@redhat.com>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

Contrary to what the comment in __exit_signal() says we do account the
group leader. Fix this and explain why.
Signed-off-by: NOleg Nesterov <oleg@redhat.com>
Cc: Aaron Tomlin <atomlin@redhat.com>
Cc: "Eric W. Biederman" <ebiederm@xmission.com>
Cc: Rik van Riel <riel@redhat.com>
Cc: Sterling Alexander <stalexan@redhat.com>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

wait_task_zombie() no longer needs tasklist_lock to accumulate the
psig->c* counters, we can drop it right after cmpxchg(exit_state).
Signed-off-by: NOleg Nesterov <oleg@redhat.com>
Cc: Aaron Tomlin <atomlin@redhat.com>
Cc: "Eric W. Biederman" <ebiederm@xmission.com>
Cc: Rik van Riel <riel@redhat.com>
Cc: Sterling Alexander <stalexan@redhat.com>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

1. wait_task_zombie() uses p->real_parent to get psig/siglock. This is
   correct but needs tasklist_lock, ->real_parent can exit.

   We can use "current" instead. This is our natural child, its parent
   must be our sub-thread.

2. Read psig/sig outside of ->siglock, ->signal is no longer protected
   by this lock.

3. Fix the outdated comments about tasklist_lock. We can not race with
   __exit_signal(), the whole thread group is dead, nobody but us can
   call it.

   Also clarify the usage of ->stats_lock and ->siglock.

Note: thread_group_cputime_adjusted() is sub-optimal in this case, we
probably want to export cputime_adjust() to avoid thread_group_cputime().
The comment says "all threads" but there are no other threads.
Signed-off-by: NOleg Nesterov <oleg@redhat.com>
Cc: Aaron Tomlin <atomlin@redhat.com>
Cc: "Eric W. Biederman" <ebiederm@xmission.com>
Cc: Rik van Riel <riel@redhat.com>
Cc: Sterling Alexander <stalexan@redhat.com>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

Now that EXIT_DEAD is the terminal state we can kill "int traced"
variable and check "state == EXIT_DEAD" instead to cleanup the code.  In
particular, this way it is clear that the check obviously doesn't need
tasklist_lock.

Also fix the type of "unsigned long state", "long" was always wrong
although this doesn't matter because cmpxchg/xchg uses typeof(*ptr).

[akpm@linux-foundation.org: don't make me google the C Operator Precedence table]
Signed-off-by: NOleg Nesterov <oleg@redhat.com>
Cc: Aaron Tomlin <atomlin@redhat.com>
Cc: "Eric W. Biederman" <ebiederm@xmission.com>
Cc: Rik van Riel <riel@redhat.com>
Cc: Sterling Alexander <stalexan@redhat.com>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

Now that we do not call kernel_thread(CLONE_VFORK) from the worker
thread we can not deadlock if do_execve() in turn triggers another
call_usermodehelper(), we can remove the kmod_thread_locker code.

Note: we should probably kill khelper_wq and simply use one of the
global workqueues, say, system_unbound_wq, this special wq for umh buys
nothing nowadays.
Signed-off-by: NOleg Nesterov <oleg@redhat.com>
Cc: Martin Schwidefsky <schwidefsky@de.ibm.com>
Cc: Oleg Nesterov <oleg@redhat.com>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

After "kernel/kmod: fix use-after-free of the sub_infostructure"
CLONE_VFORK in __call_usermodehelper() buys nothing, we rely on on
umh_complete() in ____call_usermodehelper() anyway.

Remove it.  This also eliminates the unnecessary sleep/wakeup in the
likely case, and this allows the next change.

While at it, kill the "int wait" locals in ____call_usermodehelper() and
__call_usermodehelper(), they can safely use sub_info->wait.
Signed-off-by: NOleg Nesterov <oleg@redhat.com>
Cc: Martin Schwidefsky <schwidefsky@de.ibm.com>
Cc: Oleg Nesterov <oleg@redhat.com>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

Relying on the sign (after casting to int) of the difference of two
quantities for comparison is usually wrong.  For example, should a-b
turn out to be 2^31, the return value of cmp(a,b) is -2^31; but that
would also be the return value from cmp(b, a).  So a compares less than
b and b compares less than a.  One can also easily find three values
a,b,c such that a compares less than b, b compares less than c, but a
does not compare less than c.
Signed-off-by: NRasmus Villemoes <linux@rasmusvillemoes.dk>
Reviewed-by: NVyacheslav Dubeyko <slava@dubeyko.com>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

Same story as in commit 41080b5a ("nfsd race fixes: ext2") (similar
ext2 fix) except that nilfs2 needs to use insert_inode_locked4() instead
of insert_inode_locked() and a bug of a check for dead inodes needs to
be fixed.

If nilfs_iget() is called from nfsd after nilfs_new_inode() calls
insert_inode_locked4(), nilfs_iget() will wait for unlock_new_inode() at
the end of nilfs_mkdir()/nilfs_create()/etc to unlock the inode.

If nilfs_iget() is called before nilfs_new_inode() calls
insert_inode_locked4(), it will create an in-core inode and read its
data from the on-disk inode.  But, nilfs_iget() will find i_nlink equals
zero and fail at nilfs_read_inode_common(), which will lead it to call
iget_failed() and cleanly fail.

However, this sanity check doesn't work as expected for reused on-disk
inodes because they leave a non-zero value in i_mode field and it
hinders the test of i_nlink.  This patch also fixes the issue by
removing the test on i_mode that nilfs2 doesn't need.
Signed-off-by: NRyusuke Konishi <konishi.ryusuke@lab.ntt.co.jp>
Cc: Al Viro <viro@zeniv.linux.org.uk>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

The iput() function tests whether its argument is NULL and then returns
immediately.  Thus the test around the call is not needed.

This issue was detected by using the Coccinelle software.
Signed-off-by: NMarkus Elfring <elfring@users.sourceforge.net>
Signed-off-by: NRyusuke Konishi <konishi.ryusuke@lab.ntt.co.jp>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

This patch removes filemap_write_and_wait_range() from nilfs_sync_file(),
because it triggers a data segment construction by calling
nilfs_writepages() with WB_SYNC_ALL.  A data segment construction does not
remove the inode from the i_dirty list and it does not clear the
NILFS_I_DIRTY flag.  Therefore nilfs_inode_dirty() still returns true,
which leads to an unnecessary duplicate segment construction in
nilfs_sync_file().

A call to filemap_write_and_wait_range() is not needed, because NILFS2
does not rely on the generic writeback mechanisms.  Instead it implements
its own mechanism to collect all dirty pages and write them into segments.
 It is more efficient to initiate the segment construction directly in
nilfs_sync_file() without the detour over filemap_write_and_wait_range().

Additionally the lock of i_mutex is not needed, because all code blocks
that are protected by i_mutex are also protected by a NILFS transaction:

  Function                i_mutex     nilfs_transaction
  ------------------------------------------------------
  nilfs_ioctl_setflags:   yes         yes
  nilfs_fiemap:           yes         no
  nilfs_write_begin:      yes         yes
  nilfs_write_end:        yes         yes
  nilfs_lookup:           yes         no
  nilfs_create:           yes         yes
  nilfs_link:             yes         yes
  nilfs_mknod:            yes         yes
  nilfs_symlink:          yes         yes
  nilfs_mkdir:            yes         yes
  nilfs_unlink:           yes         yes
  nilfs_rmdir:            yes         yes
  nilfs_rename:           yes         yes
  nilfs_setattr:          yes         yes

For nilfs_lookup() i_mutex is held for the parent directory, to protect it
from modification.  The segment construction does not modify directory
inodes, so no lock is needed.

nilfs_fiemap() reads the block layout on the disk, by using
nilfs_bmap_lookup_contig(). This is already protected by bmap->b_sem.
Signed-off-by: NAndreas Rohner <andreas.rohner@gmx.net>
Signed-off-by: NRyusuke Konishi <konishi.ryusuke@lab.ntt.co.jp>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

rtc_timer_do_work() only judges -ETIME failure of__rtc_set_alarm(), but
doesn't handle other failures like -EIO, -EBUSY, etc.

If there is a failure other than -ETIME, the next rtc_timer will stay in
the timerqueue.  Then later rtc_timers will be enqueued directly because
they have a later expires time, so the alarm irq will never be programmed.

When such failures happen, this patch will retry __rtc_set_alarm(), if
still can't program the alarm time, it will remove current rtc_timer from
timerqueue and fetch next one, thus preventing it from affecting other rtc
timers.
Signed-off-by: NXunlei Pang <pang.xunlei@linaro.org>
Cc: Alessandro Zummo <a.zummo@towertech.it>
Cc: John Stultz <john.stultz@linaro.org>
Cc: Arnd Bergmann <arnd.bergmann@linaro.org>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

Currently, ab8500 doesn't set uie_unsupported of rtc_device, while it
doesn't support UIE, see ab8500_rtc_set_alarm().

Thus, when going through rtc_update_irq_enable()->rtc_timer_enqueue(),
there's a chance it has an alarm timer1 queued before which is going to
fired, so this update timer2 will be queued because it isn't the leftmost
one, which means rtc_timer_enqueue() will return 0.

This will result in two problems:
1) UIE EMUL will not be used.
2) When the alarm timer1 is fired, in rtc_timer_do_work() timer2 will
   fail to set the alarm time, so this rtc will disfunctional due to
   timer2 with the earliest expires in the timerqueue.

So, rtc drivers must set this flag if they don't support UIE.
Signed-off-by: NXunlei Pang <pang.xunlei@linaro.org>
Cc: Alessandro Zummo <a.zummo@towertech.it>
Cc: John Stultz <john.stultz@linaro.org>
Cc: Arnd Bergmann <arnd.bergmann@linaro.org>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

The alarm interrupt handler also reads registers which are part of SNVS
and need clocks enabled.  However, the resume function is called after
IRQ's have been enabled, hence this leads to a abort:

    Unhandled fault: external abort on non-linefetch (0x1008) at 0x908c604c
    Internal error: : 1008 [#1] ARM
    Modules linked in:
    CPU: 0 PID: 421 Comm: sh Not tainted 3.18.0-rc5-00135-g0689c67-dirty #1592
    task: 8e03e800 ti: 8cad8000 task.ti: 8cad8000
    PC is at snvs_rtc_irq_handler+0x14/0x74
    LR is at handle_irq_event_percpu+0x3c/0x144

Fix this by using the .{suspend/resume}_noirq callbacks instead of
.{suspend/resume} .
Signed-off-by: NSanchayan Maity <maitysanchayan@gmail.com>
Cc: Shawn Guo <shawn.guo@linaro.org>
Cc: Stefan Agner <stefan@agner.ch>
Cc: Alessandro Zummo <a.zummo@towertech.it>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

Add clock enable and disable support for the SNVS peripheral, which is
required for using the RTC within the SNVS block.

The clock is not strictly enforced, as this would break the i.MX devices.
The clocking for the i.MX devices seems to be enabled elsewhere and
enabling RTC SNVS for Vybrid results in a crash.  This patch adds the
clock support but also makes it optional so Vybrid platform can use the
clock if defined while making sure not to break i.MX.
Signed-off-by: NSanchayan Maity <maitysanchayan@gmail.com>
Cc: Shawn Guo <shawn.guo@linaro.org>
Acked-by: NStefan Agner <stefan@agner.ch>
Acked-by: NAlessandro Zummo <a.zummo@towertech.it>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

Drop the vendor-prefix from the "ti,system-power-controller" device-tree
property name.

It has been agreed to make "system-power-controller" a standard property
and to drop the vendor-prefix that is currently used by several drivers.

Note that drivers that have used "<vendor>,system-power-controller" in a
released kernel will need to support both versions.
Signed-off-by: NJohan Hovold <johan@kernel.org>
Cc: Tony Lindgren <tony@atomide.com>
Cc: Benot Cousson <bcousson@baylibre.com>
Cc: Alessandro Zummo <a.zummo@towertech.it>
Cc: Felipe Balbi <balbi@ti.com>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

As pointed out by Mark, it is generally useful to log the error code when
reporting a failure.  This patch improves existing calls to dev_err() in
ISL12057 driver to also report error code.
Signed-off-by: NArnaud Ebalard <arno@natisbad.org>
Suggested-by: NMark Brown <broonie@kernel.org>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Alessandro Zummo <a.zummo@towertech.it>
Cc: Peter Huewe <peter.huewe@infineon.com>
Cc: Linus Walleij <linus.walleij@linaro.org>
Cc: Thierry Reding <treding@nvidia.com>
Cc: Grant Likely <grant.likely@linaro.org>
Acked-by: NUwe Kleine-König <uwe@kleine-koenig.org>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

As suggested by Uwe, instead of clearing oscillator failure bit
unconditionally at driver load, this patch adds proper handling of the
flag.  The driver now returns -ENODATA when reading time from the device
and oscillator failure bit is set.  The flag is now cleared only when the
a new time value is pushed to the device.
Signed-off-by: NArnaud Ebalard <arno@natisbad.org>
Reported-by: NUwe Kleine-König <uwe@kleine-koenig.org>
Acked-by: NUwe Kleine-König <uwe@kleine-koenig.org>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Alessandro Zummo <a.zummo@towertech.it>
Cc: Peter Huewe <peter.huewe@infineon.com>
Cc: Linus Walleij <linus.walleij@linaro.org>
Cc: Thierry Reding <treding@nvidia.com>
Cc: Mark Brown <broonie@kernel.org>
Cc: Grant Likely <grant.likely@linaro.org>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

The month register of ISL12057 RTC chip includes a century bit which
reports overflow of year register from 99 to 0.  This bit can also be
written, which allows using it to extend the time interval the chip can
support from 99 to 199 years.

This patch adds support for century overflow bit in tm to regs and regs to
tm helpers in ISL12057 driver.

This was tested by putting a device 100 years in the future (using a
specific kernel due to the inability of userland tools such as date or
hwclock to pass year 2038), rebooting on a kernel w/ this patch applied
and verifying the device was still 100 years in the future.
Signed-off-by: NArnaud Ebalard <arno@natisbad.org>
Suggested-by: NUwe Kleine-König <uwe@kleine-koenig.org>
Acked-by: NUwe Kleine-König <uwe@kleine-koenig.org>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Alessandro Zummo <a.zummo@towertech.it>
Cc: Peter Huewe <peter.huewe@infineon.com>
Cc: Linus Walleij <linus.walleij@linaro.org>
Cc: Thierry Reding <treding@nvidia.com>
Cc: Mark Brown <broonie@kernel.org>
Cc: Grant Likely <grant.likely@linaro.org>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

When Intersil ISL12057 support was added by commit 70e12337 ("rtc: Add
support for Intersil ISL12057 I2C RTC chip"), two masks for time registers
values imported from the device were either wrong or omitted, leading to
additional bits from those registers to impact read values:

 - mask for hour register value when reading it in AM/PM mode. As
   AM/PM mode is not the usual mode used by the driver, this error
   would only have an impact on an externally configured RTC hour
   later read by the driver.
 - mask for month value. The lack of masking would provide an
   erroneous value if century bit is set.

This patch fixes those two masks.

Fixes: 70e12337 ("rtc: Add support for Intersil ISL12057 I2C RTC chip")
Signed-off-by: NArnaud Ebalard <arno@natisbad.org>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Alessandro Zummo <a.zummo@towertech.it>
Cc: Peter Huewe <peter.huewe@infineon.com>
Cc: Linus Walleij <linus.walleij@linaro.org>
Cc: Thierry Reding <treding@nvidia.com>
Cc: Mark Brown <broonie@kernel.org>
Cc: Grant Likely <grant.likely@linaro.org>
Acked-by: NUwe Kleine-König <uwe@kleine-koenig.org>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

Signed-off-by: NTomas Novotny <tomas@novotny.cz>
Cc: Alessandro Zummo <a.zummo@towertech.it>
Cc: Grant Likely <grant.likely@linaro.org>
Cc: Rob Herring <robh+dt@kernel.org>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

MCP7940x is same RTC as MCP7941x.  The difference is that MCP7941x chips
contain additional EEPROM on a different i2c address.

DS1307 driver already supports MCP7941x, so just add a new i2c device id
and rename functions and defines accordingly.
Signed-off-by: NTomas Novotny <tomas@novotny.cz>
Cc: Alessandro Zummo <a.zummo@towertech.it>
Cc: Grant Likely <grant.likely@linaro.org>
Cc: Rob Herring <robh+dt@kernel.org>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

Add support for the watchdog functionality of the DS1374 rtc.  Based on
the m41t80 watchdog functionality Note: watchdog uses the same registers
as alarm.

[akpm@linux-foundation.org: don't forget mutex_unlock() in ds1374_wdt_open() error path]
[akpm@linux-foundation.org: coding-style fixes]
Signed-off-by: NSoeren Andersen <san@rosetechnology.dk>
Cc: Alessandro Zummo <a.zummo@towertech.it>
Cc: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

Signed-off-by: NBarry Song <Baohua.Song@csr.com>
Cc: hao liu <hao.liu@csr.com>
Cc: Alessandro Zummo <a.zummo@towertech.it>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

Add missed alarm_irq_enable() callback for CSR SiRFSoC RTCs.

[akpm@linux-foundation.org: remove unneeded cast]
Signed-off-by: Nhao liu <hao.liu@csr.com>
Signed-off-by: NBarry Song <Baohua.Song@csr.com>
Cc: Alessandro Zummo <a.zummo@towertech.it>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

In case the card is woken up of the rtc alarm, the
devm_rtc_device_register function detects it as a pending alarm about a
month in the future.  Fix this by clearing the alarm in module probe.
Signed-off-by: NJan Kardell <jan.kardell@telliq.com>
Cc: Alessandro Zummo <a.zummo@towertech.it>
Cc: Grant Likely <grant.likely@linaro.org>
Cc: Rob Herring <robh+dt@kernel.org>
Cc: Vincent Donnefort <vdonnefort@gmail.com>
Cc: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>