Add tracepoints for ATA error handling.
Signed-off-by: NHannes Reinecke <hare@suse.de>
Signed-off-by: NDamien Le Moal <damien.lemoal@opensource.wdc.com>

Drop DPRINTK calls for cdb translation as they are already covered
by other traces, and also drop the DPRINTK calls in ata_scsi_hotplug().
Signed-off-by: NHannes Reinecke <hare@suse.de>
Signed-off-by: NDamien Le Moal <damien.lemoal@opensource.wdc.com>

Add tracepoints for the HSM state machine and drop DPRINTK calls
Signed-off-by: NHannes Reinecke <hare@suse.de>
Signed-off-by: NDamien Le Moal <damien.lemoal@opensource.wdc.com>

Add tracepoints for bus-master DMA and taskfile related functions.
That allows us to drop the relevant DPRINTK() calls.
Signed-off-by: NHannes Reinecke <hare@suse.de>
Signed-off-by: NDamien Le Moal <damien.lemoal@opensource.wdc.com>

Convert the existing ata_qc_issue() tracepoint into a template,
and add tracepoints for ata_qc_prep() and ata_qc_issue() based
on that template.
Signed-off-by: NHannes Reinecke <hare@suse.de>
Signed-off-by: NDamien Le Moal <damien.lemoal@opensource.wdc.com>

To follow the flow of control we should be using tracepoints, as
they will tie in with the actual I/O flow and deliver a better
overview about what it happening.
This patch adds tracepoints for hard reset, soft reset, and postreset
and adds them in the libata-eh control flow.
With that we can drop the reset DPRINTK calls in the various drivers.
Signed-off-by: NHannes Reinecke <hare@suse.de>
Signed-off-by: NDamien Le Moal <damien.lemoal@opensource.wdc.com>

With moving ata_dev_dbg() over to dynamic debugging ATA_HORKAGE_DUMP_ID
will now print out the raw IDENTIFY data without a header unless
explicitly enable via dyndebug.
So move the logging level up to INFO and have the header printed
always.
Signed-off-by: NHannes Reinecke <hare@suse.de>
Signed-off-by: NDamien Le Moal <damien.lemoal@opensource.wdc.com>

Use ata_dev_dbg() to print out the information in ata_dump_id()
and remove the ata_msg_probe() conditional.
Signed-off-by: NHannes Reinecke <hare@suse.de>
Signed-off-by: NDamien Le Moal <damien.lemoal@opensource.wdc.com>

Add an ata_port_classify() helper to print out the results from
the device classification and remove the debugging statements
from ata_dev_classify().
Signed-off-by: NHannes Reinecke <hare@suse.de>
Signed-off-by: NDamien Le Moal <damien.lemoal@opensource.wdc.com>

Signed-off-by: NHannes Reinecke <hare@suse.de>
Signed-off-by: NDamien Le Moal <damien.lemoal@opensource.wdc.com>

Debugging messages in pci init functions or sg setup are pretty
much pointless, as the workflow pretty much decides what happened.
So drop them.
Signed-off-by: NHannes Reinecke <hare@suse.de>
Signed-off-by: NDamien Le Moal <damien.lemoal@opensource.wdc.com>

Use min() in order to make code cleaner.
Reported-by: NZeal Robot <zealci@zte.com.cn>
Signed-off-by: NChangcheng Deng <deng.changcheng@zte.com.cn>
Signed-off-by: NDamien Le Moal <damien.lemoal@opensource.wdc.com>

platform_get_irq() will print a message when it fails.
No need to repeat this.
Signed-off-by: NAndy Shevchenko <andriy.shevchenko@linux.intel.com>
Signed-off-by: NDamien Le Moal <damien.lemoal@opensource.wdc.com>

If 64-bit mask attempt fails, the 32-bit will fail by the very same reason.
Don't even try the latter. It's a continuation of the changes that contains,
e.g. dcc02c19 ("sata_sil24: use dma_set_mask_and_coherent").
Signed-off-by: NAndy Shevchenko <andriy.shevchenko@linux.intel.com>
Reviewed-by: NHans de Goede <hdegoede@redhat.com>
Signed-off-by: NDamien Le Moal <damien.lemoal@opensource.wdc.com>

sata_dwc_port_stop() is not used before being defined,
remove redundant forward declaration.
Signed-off-by: NAndy Shevchenko <andriy.shevchenko@linux.intel.com>
Signed-off-by: NDamien Le Moal <damien.lemoal@opensource.wdc.com>

Use temporary variable for struct device to make code neater.
Signed-off-by: NAndy Shevchenko <andriy.shevchenko@linux.intel.com>
Signed-off-by: NDamien Le Moal <damien.lemoal@opensource.wdc.com>

Use devm_platform_get_and_ioremap_resource() and
devm_platform_ioremap_resource() APIs instead of their
open coded analogues.
Signed-off-by: NAndy Shevchenko <andriy.shevchenko@linux.intel.com>
Signed-off-by: NDamien Le Moal <damien.lemoal@opensource.wdc.com>

Use sysfs_emit() instead of sprintf() in fsl_sata_intr_coalescing_show()
and fsl_sata_rx_watermark_show().
Signed-off-by: NDamien Le Moal <damien.lemoal@opensource.wdc.com>

Use sysfs_emit() instead of sprintf in remapped_nvme_show().
Signed-off-by: NDamien Le Moal <damien.lemoal@opensource.wdc.com>

Use sysfs_emit() instead of snprintf() in ata_scsi_park_show().
Signed-off-by: NDamien Le Moal <damien.lemoal@opensource.wdc.com>

Use sysfs_emit() instead of snprintf() in sysfs attibute show()
functions.
Signed-off-by: NDamien Le Moal <damien.lemoal@opensource.wdc.com>

In preparation for FORTIFY_SOURCE performing compile-time and run-time
field bounds checking for memcpy(), memmove(), and memset(), avoid
intentionally writing across neighboring fields.

Use struct_group() in struct command_desc around members acmd and fill,
so they can be referenced together. This will allow memset(), memcpy(),
and sizeof() to more easily reason about sizes, improve readability,
and avoid future warnings about writing beyond the end of acmd:

In function 'fortify_memset_chk',
    inlined from 'sata_fsl_qc_prep' at drivers/ata/sata_fsl.c:534:3:
./include/linux/fortify-string.h:199:4: warning: call to '__write_overflow_field' declared with attribute warning: detected write beyond size of field (1st parameter); maybe use struct_group()? [-Wattribute-warning]
  199 |    __write_overflow_field();
      |    ^~~~~~~~~~~~~~~~~~~~~~~~
Signed-off-by: NKees Cook <keescook@chromium.org>
Signed-off-by: NDamien Le Moal <damien.lemoal@opensource.wdc.com>

Static variables do not need to be initialized to 0.
Signed-off-by: NJason Wang <wangborong@cdjrlc.com>
Signed-off-by: NDamien Le Moal <damien.lemoal@opensource.wdc.com>

Merge tag 'perf-tools-fixes-for-v5.16-2022-01-02' of git://git.kernel.org/pub/scm/linux/kernel/git/acme/linux

Pull perf tools fixes from Arnaldo Carvalho de Melo:

 - Fix TUI exit screen refresh race condition in 'perf top'.

 - Fix parsing of Intel PT VM time correlation arguments.

 - Honour CPU filtering command line request of a script's switch events
   in 'perf script'.

 - Fix printing of switch events in Intel PT python script.

 - Fix duplicate alias events list printing in 'perf list', noticed on
   heterogeneous arm64 systems.

 - Fix return value of ids__new(), users expect NULL for failure, not
   ERR_PTR(-ENOMEM).

* tag 'perf-tools-fixes-for-v5.16-2022-01-02' of git://git.kernel.org/pub/scm/linux/kernel/git/acme/linux:
  perf top: Fix TUI exit screen refresh race condition
  perf pmu: Fix alias events list
  perf scripts python: intel-pt-events.py: Fix printing of switch events
  perf script: Fix CPU filtering of a script's switch events
  perf intel-pt: Fix parsing of VM time correlation arguments
  perf expr: Fix return value of ids__new()

Pull i2c fixes from Wolfram Sang:
 "Better input validation for compat ioctls and a documentation bugfix
  for 5.16"

* 'i2c/for-current' of git://git.kernel.org/pub/scm/linux/kernel/git/wsa/linux:
  Docs: Fixes link to I2C specification
  i2c: validate user data in compat ioctl

Pull x86 fix from Borislav Petkov:

 - Use the proper CONFIG symbol in a preprocessor check.

* tag 'x86_urgent_for_v5.16_rc8' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  x86/build: Use the proper name CONFIG_FW_LOADER

When the following command is executed several times, a coredump file is
generated.

	$ timeout -k 9 5 perf top -e task-clock
	*******
	*******
	*******
	0.01%  [kernel]                  [k] __do_softirq
	0.01%  libpthread-2.28.so        [.] __pthread_mutex_lock
	0.01%  [kernel]                  [k] __ll_sc_atomic64_sub_return
	double free or corruption (!prev) perf top --sort comm,dso
	timeout: the monitored command dumped core

When we terminate "perf top" using sending signal method,
SLsmg_reset_smg() called. SLsmg_reset_smg() resets the SLsmg screen
management routines by freeing all memory allocated while it was active.

However SLsmg_reinit_smg() maybe be called by another thread.

SLsmg_reinit_smg() will free the same memory accessed by
SLsmg_reset_smg(), thus it results in a double free.

SLsmg_reinit_smg() is called already protected by ui__lock, so we fix
the problem by adding pthread_mutex_trylock of ui__lock when calling
SLsmg_reset_smg().
Signed-off-by: NWenyu Liu <liuwenyu7@huawei.com>
Tested-by: NArnaldo Carvalho de Melo <acme@redhat.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: wuxu.wu@huawei.com
Link: http://lore.kernel.org/lkml/a91e3943-7ddc-f5c0-a7f5-360f073c20e6@huawei.comSigned-off-by: NHewenliang <hewenliang4@huawei.com>
Signed-off-by: Nyaowenbin <yaowenbin1@huawei.com>
Signed-off-by: NArnaldo Carvalho de Melo <acme@redhat.com>

Commit 0e0ae874 ("perf list: Display hybrid PMU events with cpu
type") changes the event list for uncore PMUs or arm64 heterogeneous CPU
systems, such that duplicate aliases are incorrectly listed per PMU
(which they should not be), like:

  # perf list
  ...
  unc_cbo_cache_lookup.any_es
  [Unit: uncore_cbox L3 Lookup any request that access cache and found
  line in E or S-state]
  unc_cbo_cache_lookup.any_es
  [Unit: uncore_cbox L3 Lookup any request that access cache and found
  line in E or S-state]
  unc_cbo_cache_lookup.any_i
  [Unit: uncore_cbox L3 Lookup any request that access cache and found
  line in I-state]
  unc_cbo_cache_lookup.any_i
  [Unit: uncore_cbox L3 Lookup any request that access cache and found
  line in I-state]
  ...

Notice how the events are listed twice.

The named commit changed how we remove duplicate events, in that events
for different PMUs are not treated as duplicates. I suppose this is to
handle how "Each hybrid pmu event has been assigned with a pmu name".

Fix PMU alias listing by restoring behaviour to remove duplicates for
non-hybrid PMUs.

Fixes: 0e0ae874 ("perf list: Display hybrid PMU events with cpu type")
Signed-off-by: NJohn Garry <john.garry@huawei.com>
Tested-by: NZhengjun Xing <zhengjun.xing@linux.intel.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Ian Rogers <irogers@google.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Kan Liang <kan.liang@linux.intel.com>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: https://lore.kernel.org/r/1640103090-140490-1-git-send-email-john.garry@huawei.comSigned-off-by: NArnaldo Carvalho de Melo <acme@redhat.com>

Pull input fixes from Dmitry Torokhov:
 "Two small fixups for spaceball joystick driver and appletouch touchpad
  driver"

* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input:
  Input: spaceball - fix parsing of movement data packets
  Input: appletouch - initialize work before device registration

Hugh Dickins reported the following

	My tmpfs swapping load (tweaked to use huge pages more heavily
	than in real life) is far from being a realistic load: but it was
	notably slowed down by your throttling mods in 5.16-rc, and this
	patch makes it well again - thanks.

	But: it very quickly hit NULL pointer until I changed that last
	line to

        if (first_pgdat)
                consider_reclaim_throttle(first_pgdat, sc);

The likely issue is that huge pages are a major component of the test
workload.  When this is the case, first_pgdat may never get set if
compaction is ready to continue due to this check

        if (IS_ENABLED(CONFIG_COMPACTION) &&
            sc->order > PAGE_ALLOC_COSTLY_ORDER &&
            compaction_ready(zone, sc)) {
                sc->compaction_ready = true;
                continue;
        }

If this was true for every zone in the zonelist, first_pgdat would never
get set resulting in a NULL pointer exception.

Link: https://lkml.kernel.org/r/20211209095453.GM3366@techsingularity.net
Fixes: 1b4e3f26 ("mm: vmscan: Reduce throttling due to a failure to make progress")
Signed-off-by: NMel Gorman <mgorman@techsingularity.net>
Reported-by: NHugh Dickins <hughd@google.com>
Cc: Michal Hocko <mhocko@suse.com>
Cc: Vlastimil Babka <vbabka@suse.cz>
Cc: Rik van Riel <riel@surriel.com>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Darrick J. Wong <djwong@kernel.org>
Cc: Shakeel Butt <shakeelb@google.com>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

Mike Galbraith, Alexey Avramov and Darrick Wong all reported similar
problems due to reclaim throttling for excessive lengths of time.  In
Alexey's case, a memory hog that should go OOM quickly stalls for
several minutes before stalling.  In Mike and Darrick's cases, a small
memcg environment stalled excessively even though the system had enough
memory overall.

Commit 69392a40 ("mm/vmscan: throttle reclaim when no progress is
being made") introduced the problem although commit a19594ca
("mm/vmscan: increase the timeout if page reclaim is not making
progress") made it worse.  Systems at or near an OOM state that cannot
be recovered must reach OOM quickly and memcg should kill tasks if a
memcg is near OOM.

To address this, only stall for the first zone in the zonelist, reduce
the timeout to 1 tick for VMSCAN_THROTTLE_NOPROGRESS and only stall if
the scan control nr_reclaimed is 0, kswapd is still active and there
were excessive pages pending for writeback.  If kswapd has stopped
reclaiming due to excessive failures, do not stall at all so that OOM
triggers relatively quickly.  Similarly, if an LRU is simply congested,
only lightly throttle similar to NOPROGRESS.

Alexey's original case was the most straight forward

	for i in {1..3}; do tail /dev/zero; done

On vanilla 5.16-rc1, this test stalled heavily, after the patch the test
completes in a few seconds similar to 5.15.

Alexey's second test case added watching a youtube video while tail runs
10 times.  On 5.15, playback only jitters slightly, 5.16-rc1 stalls a
lot with lots of frames missing and numerous audio glitches.  With this
patch applies, the video plays similarly to 5.15.

[lkp@intel.com: Fix W=1 build warning]

Link: https://lore.kernel.org/r/99e779783d6c7fce96448a3402061b9dc1b3b602.camel@gmx.de
Link: https://lore.kernel.org/r/20211124011954.7cab9bb4@mail.inbox.lv
Link: https://lore.kernel.org/r/20211022144651.19914-1-mgorman@techsingularity.net
Link: https://lore.kernel.org/r/20211202150614.22440-1-mgorman@techsingularity.net
Link: https://linux-regtracking.leemhuis.info/regzbot/regression/20211124011954.7cab9bb4@mail.inbox.lv/Reported-and-tested-by: NAlexey Avramov <hakavlad@inbox.lv>
Reported-and-tested-by: NMike Galbraith <efault@gmx.de>
Reported-and-tested-by: NDarrick J. Wong <djwong@kernel.org>
Reported-by: Nkernel test robot <lkp@intel.com>
Acked-by: NHugh Dickins <hughd@google.com>
Tracked-by: NThorsten Leemhuis <regressions@leemhuis.info>
Fixes: 69392a40 ("mm/vmscan: throttle reclaim when no progress is being made")
Signed-off-by: NMel Gorman <mgorman@techsingularity.net>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

Merge misc mm fixes from Andrew Morton:
 "2 patches.

  Subsystems affected by this patch series: mm (userfaultfd and damon)"

* akpm:
  mm/damon/dbgfs: fix 'struct pid' leaks in 'dbgfs_target_ids_write()'
  userfaultfd/selftests: fix hugetlb area allocations

Pull SCSI fixes from James Bottomley:
 "Three fixes, all in drivers. The lpfc one doesn't look exploitable,
  but nasty things could happen in string operations if mybuf ends up
  with an on stack unterminated string"

* tag 'scsi-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi:
  scsi: vmw_pvscsi: Set residual data length conditionally
  scsi: libiscsi: Fix UAF in iscsi_conn_get_param()/iscsi_conn_teardown()
  scsi: lpfc: Terminate string in lpfc_debugfs_nvmeio_trc_write()

DAMON debugfs interface increases the reference counts of 'struct pid's
for targets from the 'target_ids' file write callback
('dbgfs_target_ids_write()'), but decreases the counts only in DAMON
monitoring termination callback ('dbgfs_before_terminate()').

Therefore, when 'target_ids' file is repeatedly written without DAMON
monitoring start/termination, the reference count is not decreased and
therefore memory for the 'struct pid' cannot be freed.  This commit
fixes this issue by decreasing the reference counts when 'target_ids' is
written.

Link: https://lkml.kernel.org/r/20211229124029.23348-1-sj@kernel.org
Fixes: 4bc05954 ("mm/damon: implement a debugfs-based user space interface")
Signed-off-by: NSeongJae Park <sj@kernel.org>
Cc: <stable@vger.kernel.org>	[5.15+]
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

Currently, userfaultfd selftest for hugetlb as run from run_vmtests.sh
or any environment where there are 'just enough' hugetlb pages will
always fail with:

  testing events (fork, remap, remove):
		ERROR: UFFDIO_COPY error: -12 (errno=12, line=616)

The ENOMEM error code implies there are not enough hugetlb pages.
However, there are free hugetlb pages but they are all reserved.  There
is a basic problem with the way the test allocates hugetlb pages which
has existed since the test was originally written.

Due to the way 'cleanup' was done between different phases of the test,
this issue was masked until recently.  The issue was uncovered by commit
8ba6e864 ("userfaultfd/selftests: reinitialize test context in each
test").

For the hugetlb test, src and dst areas are allocated as PRIVATE
mappings of a hugetlb file.  This means that at mmap time, pages are
reserved for the src and dst areas.  At the start of event testing (and
other tests) the src area is populated which results in allocation of
huge pages to fill the area and consumption of reserves associated with
the area.  Then, a child is forked to fault in the dst area.  Note that
the dst area was allocated in the parent and hence the parent owns the
reserves associated with the mapping.  The child has normal access to
the dst area, but can not use the reserves created/owned by the parent.
Thus, if there are no other huge pages available allocation of a page
for the dst by the child will fail.

Fix by not creating reserves for the dst area.  In this way the child
can use free (non-reserved) pages.

Also, MAP_PRIVATE of a file only makes sense if you are interested in
the contents of the file before making a COW copy.  The test does not do
this.  So, just use MAP_ANONYMOUS | MAP_HUGETLB to create an anonymous
hugetlb mapping.  There is no need to create a hugetlb file in the
non-shared case.

Link: https://lkml.kernel.org/r/20211217172919.7861-1-mike.kravetz@oracle.comSigned-off-by: NMike Kravetz <mike.kravetz@oracle.com>
Cc: Axel Rasmussen <axelrasmussen@google.com>
Cc: Peter Xu <peterx@redhat.com>
Cc: Andrea Arcangeli <aarcange@redhat.com>
Cc: Mina Almasry <almasrymina@google.com>
Cc: Shuah Khan <shuah@kernel.org>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

The link to the I2C specification is broken. Although
"https://www.nxp.com" hosts Rev 7 (2021) of this specification, it is
behind a login-wall. Thus, an additional link has been added (which
doesn't require a login) and the NXP official docs link has been
updated.
Signed-off-by: NDeep Majumder <deep@fastmail.in>
[wsa: minor updates to text and commit message]
Signed-off-by: NWolfram Sang <wsa@kernel.org>

Wrong user data may cause warning in i2c_transfer(), ex: zero msgs.
Userspace should not be able to trigger warnings, so this patch adds
validation checks for user data in compact ioctl to prevent reported
warnings

Reported-and-tested-by: syzbot+e417648b303855b91d8a@syzkaller.appspotmail.com
Fixes: 7d5cb456 ("i2c compat ioctls: move to ->compat_ioctl()")
Signed-off-by: NPavel Skripkin <paskripkin@gmail.com>
Signed-off-by: NWolfram Sang <wsa@kernel.org>

The spaceball.c module was not properly parsing the movement reports
coming from the device.  The code read axis data as signed 16-bit
little-endian values starting at offset 2.

In fact, axis data in Spaceball movement reports are signed 16-bit
big-endian values starting at offset 3.  This was determined first by
visually inspecting the data packets, and later verified by consulting:
http://spacemice.org/pdf/SpaceBall_2003-3003_Protocol.pdf

If this ever worked properly, it was in the time before Git...
Signed-off-by: NLeo L. Schwab <ewhac@ewhac.org>
Link: https://lore.kernel.org/r/20211221101630.1146385-1-ewhac@ewhac.org
Cc: stable@vger.kernel.org
Signed-off-by: NDmitry Torokhov <dmitry.torokhov@gmail.com>

Syzbot has reported warning in __flush_work(). This warning is caused by
work->func == NULL, which means missing work initialization.

This may happen, since input_dev->close() calls
cancel_work_sync(&dev->work), but dev->work initalization happens _after_
input_register_device() call.

So this patch moves dev->work initialization before registering input
device

Fixes: 5a6eb676 ("Input: appletouch - improve powersaving for Geyser3 devices")
Reported-and-tested-by: syzbot+b88c5eae27386b252bbd@syzkaller.appspotmail.com
Signed-off-by: NPavel Skripkin <paskripkin@gmail.com>
Link: https://lore.kernel.org/r/20211230141151.17300-1-paskripkin@gmail.com
Cc: stable@vger.kernel.org
Signed-off-by: NDmitry Torokhov <dmitry.torokhov@gmail.com>