Add an argument to interrupt_allowed and nmi_allowed, to checking if
interrupt injection is blocked.  Use the hook to handle the case where
an interrupt arrives between check_nested_events() and the injection
logic.  Drop the retry of check_nested_events() that hack-a-fixed the
same condition.

Blocking injection is also a bit of a hack, e.g. KVM should do exiting
and non-exiting interrupt processing in a single pass, but it's a more
precise hack.  The old comment is also misleading, e.g. KVM_REQ_EVENT is
purely an optimization, setting it on every run loop (which KVM doesn't
do) should not affect functionality, only performance.
Signed-off-by: NSean Christopherson <sean.j.christopherson@intel.com>
Message-Id: <20200423022550.15113-13-sean.j.christopherson@intel.com>
[Extend to SVM, add SMI and NMI.  Even though NMI and SMI cannot come
 asynchronously right now, making the fix generic is easy and removes a
 special case. - Paolo]
Signed-off-by: NPaolo Bonzini <pbonzini@redhat.com>

Use vmx_get_rflags() instead of manually reading vmcs.GUEST_RFLAGS when
querying RFLAGS.IF so that multiple checks against interrupt blocking in
a single run loop only require a single VMREAD.
Signed-off-by: NSean Christopherson <sean.j.christopherson@intel.com>
Message-Id: <20200423022550.15113-14-sean.j.christopherson@intel.com>
Signed-off-by: NPaolo Bonzini <pbonzini@redhat.com>

Use vmx_interrupt_blocked() instead of bouncing through
vmx_interrupt_allowed() when handling edge cases in vmx_handle_exit().
The nested_run_pending check in vmx_interrupt_allowed() should never
evaluate true in the VM-Exit path.

Hoist the WARN in handle_invalid_guest_state() up to vmx_handle_exit()
to enforce the above assumption for the !enable_vnmi case, and to detect
any other potential bugs with nested VM-Enter.
Signed-off-by: NSean Christopherson <sean.j.christopherson@intel.com>
Message-Id: <20200423022550.15113-12-sean.j.christopherson@intel.com>
Signed-off-by: NPaolo Bonzini <pbonzini@redhat.com>

WARN if a pending exception is coincident with an injected exception
before calling check_nested_events() so that the WARN will fire even if
inject_pending_event() bails early because check_nested_events() detects
the conflict.  Bailing early isn't problematic (quite the opposite), but
suppressing the WARN is undesirable as it could mask a bug elsewhere in
KVM.
Signed-off-by: NSean Christopherson <sean.j.christopherson@intel.com>
Message-Id: <20200423022550.15113-11-sean.j.christopherson@intel.com>
Signed-off-by: NPaolo Bonzini <pbonzini@redhat.com>

Short circuit vmx_check_nested_events() if an unblocked IRQ/NMI/SMI is
pending and needs to be injected into L2, priority between coincident
events is not dependent on exiting behavior.

Fixes: b518ba9f ("KVM: nSVM: implement check_nested_events for interrupts")
Signed-off-by: NPaolo Bonzini <pbonzini@redhat.com>

Report interrupts as allowed when the vCPU is in L2 and L2 is being run with
exit-on-interrupts enabled and EFLAGS.IF=1 (either on the host or on the guest
according to VINTR).  Interrupts are always unblocked from L1's perspective
in this case.

While moving nested_exit_on_intr to svm.h, use INTERCEPT_INTR properly instead
of assuming it's zero (which it is of course).
Signed-off-by: NPaolo Bonzini <pbonzini@redhat.com>

Check for an unblocked SMI in vmx_check_nested_events() so that pending
SMIs are correctly prioritized over IRQs and NMIs when the latter events
will trigger VM-Exit.  This also fixes an issue where an SMI that was
marked pending while processing a nested VM-Enter wouldn't trigger an
immediate exit, i.e. would be incorrectly delayed until L2 happened to
take a VM-Exit.

Fixes: 64d60670 ("KVM: x86: stubs for SMM support")
Signed-off-by: NSean Christopherson <sean.j.christopherson@intel.com>
Message-Id: <20200423022550.15113-10-sean.j.christopherson@intel.com>
Signed-off-by: NPaolo Bonzini <pbonzini@redhat.com>

Short circuit vmx_check_nested_events() if an unblocked IRQ/NMI is
pending and needs to be injected into L2, priority between coincident
events is not dependent on exiting behavior.

Fixes: b6b8a145 ("KVM: nVMX: Rework interception of IRQs and NMIs")
Signed-off-by: NSean Christopherson <sean.j.christopherson@intel.com>
Message-Id: <20200423022550.15113-9-sean.j.christopherson@intel.com>
Signed-off-by: NPaolo Bonzini <pbonzini@redhat.com>

Move the architectural (non-KVM specific) interrupt/NMI/SMI blocking checks
to a separate helper so that they can be used in a future patch by
svm_check_nested_events().

No functional change intended.
Signed-off-by: NPaolo Bonzini <pbonzini@redhat.com>

Move the architectural (non-KVM specific) interrupt/NMI blocking checks
to a separate helper so that they can be used in a future patch by
vmx_check_nested_events().

No functional change intended.
Signed-off-by: NSean Christopherson <sean.j.christopherson@intel.com>
Message-Id: <20200423022550.15113-8-sean.j.christopherson@intel.com>
Signed-off-by: NPaolo Bonzini <pbonzini@redhat.com>

Unlike VMX, SVM allows a hypervisor to take a SMI vmexit without having
any special SMM-monitor enablement sequence.  Therefore, it has to be
handled like interrupts and NMIs.  Check for an unblocked SMI in
svm_check_nested_events() so that pending SMIs are correctly prioritized
over IRQs and NMIs when the latter events will trigger VM-Exit.

Note that there is no need to test explicitly for SMI vmexits, because
guests always runs outside SMM and therefore can never get an SMI while
they are blocked.
Signed-off-by: NPaolo Bonzini <pbonzini@redhat.com>

Report NMIs as allowed when the vCPU is in L2 and L2 is being run with
Exit-on-NMI enabled, as NMIs are always unblocked from L1's perspective
in this case.
Signed-off-by: NPaolo Bonzini <pbonzini@redhat.com>

Report NMIs as allowed when the vCPU is in L2 and L2 is being run with
Exit-on-NMI enabled, as NMIs are always unblocked from L1's perspective
in this case.
Signed-off-by: NSean Christopherson <sean.j.christopherson@intel.com>
Message-Id: <20200423022550.15113-7-sean.j.christopherson@intel.com>
Signed-off-by: NPaolo Bonzini <pbonzini@redhat.com>

Do not hardcode is_smm so that all the architectural conditions for
blocking SMIs are listed in a single place.  Well, in two places because
this introduces some code duplication between Intel and AMD.

This ensures that nested SVM obeys GIF in kvm_vcpu_has_events.
Signed-off-by: NPaolo Bonzini <pbonzini@redhat.com>

Return an actual bool for kvm_x86_ops' {interrupt_nmi}_allowed() hook to
better reflect the return semantics, and to avoid creating an even
bigger mess when the related VMX code is refactored in upcoming patches.
Signed-off-by: NSean Christopherson <sean.j.christopherson@intel.com>
Message-Id: <20200423022550.15113-5-sean.j.christopherson@intel.com>
Signed-off-by: NPaolo Bonzini <pbonzini@redhat.com>

Re-request KVM_REQ_EVENT if vcpu_enter_guest() bails after processing
pending requests and an immediate exit was requested.  This fixes a bug
where a pending event, e.g. VMX preemption timer, is delayed and/or lost
if the exit was deferred due to something other than a higher priority
_injected_ event, e.g. due to a pending nested VM-Enter.  This bug only
affects the !injected case as kvm_x86_ops.cancel_injection() sets
KVM_REQ_EVENT to redo the injection, but that's purely serendipitous
behavior with respect to the deferred event.

Note, emulated preemption timer isn't the only event that can be
affected, it simply happens to be the only event where not re-requesting
KVM_REQ_EVENT is blatantly visible to the guest.

Fixes: f4124500 ("KVM: nVMX: Fully emulate preemption timer")
Signed-off-by: NSean Christopherson <sean.j.christopherson@intel.com>
Message-Id: <20200423022550.15113-4-sean.j.christopherson@intel.com>
Signed-off-by: NPaolo Bonzini <pbonzini@redhat.com>

Add a kvm_x86_ops hook to detect a nested pending "hypervisor timer" and
use it to effectively open a window for servicing the expired timer.
Like pending SMIs on VMX, opening a window simply means requesting an
immediate exit.

This fixes a bug where an expired VMX preemption timer (for L2) will be
delayed and/or lost if a pending exception is injected into L2.  The
pending exception is rightly prioritized by vmx_check_nested_events()
and injected into L2, with the preemption timer left pending.  Because
no window opened, L2 is free to run uninterrupted.

Fixes: f4124500 ("KVM: nVMX: Fully emulate preemption timer")
Reported-by: NJim Mattson <jmattson@google.com>
Cc: Oliver Upton <oupton@google.com>
Cc: Peter Shier <pshier@google.com>
Signed-off-by: NSean Christopherson <sean.j.christopherson@intel.com>
Message-Id: <20200423022550.15113-3-sean.j.christopherson@intel.com>
[Check it in kvm_vcpu_has_events too, to ensure that the preemption
 timer is serviced promptly even if the vCPU is halted and L1 is not
 intercepting HLT. - Paolo]
Signed-off-by: NPaolo Bonzini <pbonzini@redhat.com>

Short circuit vmx_check_nested_events() if an exception is pending and
needs to be injected into L2, priority between coincident events is not
dependent on exiting behavior.  This fixes a bug where a single-step #DB
that is not intercepted by L1 is incorrectly dropped due to servicing a
VMX Preemption Timer VM-Exit.

Injected exceptions also need to be blocked if nested VM-Enter is
pending or an exception was already injected, otherwise injecting the
exception could overwrite an existing event injection from L1.
Technically, this scenario should be impossible, i.e. KVM shouldn't
inject its own exception during nested VM-Enter.  This will be addressed
in a future patch.

Note, event priority between SMI, NMI and INTR is incorrect for L2, e.g.
SMI should take priority over VM-Exit on NMI/INTR, and NMI that is
injected into L2 should take priority over VM-Exit INTR.  This will also
be addressed in a future patch.

Fixes: b6b8a145 ("KVM: nVMX: Rework interception of IRQs and NMIs")
Reported-by: NJim Mattson <jmattson@google.com>
Cc: Oliver Upton <oupton@google.com>
Cc: Peter Shier <pshier@google.com>
Signed-off-by: NSean Christopherson <sean.j.christopherson@intel.com>
Message-Id: <20200423022550.15113-2-sean.j.christopherson@intel.com>
Signed-off-by: NPaolo Bonzini <pbonzini@redhat.com>

Migrate nested guest NMI intercept processing
to new check_nested_events.
Signed-off-by: NCathy Avery <cavery@redhat.com>
Message-Id: <20200414201107.22952-2-cavery@redhat.com>
[Reorder clauses as NMIs have higher priority than IRQs; inject
 immediate vmexit as is now done for IRQ vmexits. - Paolo]
Signed-off-by: NPaolo Bonzini <pbonzini@redhat.com>

We can immediately leave SVM guest mode in svm_check_nested_events
now that we have the nested_run_pending mechanism.  This makes
things easier because we can run the rest of inject_pending_event
with GIF=0, and KVM will naturally end up requesting the next
interrupt window.
Signed-off-by: NPaolo Bonzini <pbonzini@redhat.com>

Similar to VMX, we need to leave the halted state when performing a vmexit.
Failure to do so will cause a hang after vmexit.
Signed-off-by: NPaolo Bonzini <pbonzini@redhat.com>

We want to inject vmexits immediately from svm_check_nested_events,
so that the interrupt/NMI window requests happen in inject_pending_event
right after it returns.

This however has the same issue as in vmx_check_nested_events, so
introduce a nested_run_pending flag with the exact same purpose
of delaying vmexit injection after the vmentry.
Signed-off-by: NPaolo Bonzini <pbonzini@redhat.com>

Though rdpkru and wrpkru are contingent upon CR4.PKE, the PKRU
resource isn't. It can be read with XSAVE and written with XRSTOR.
So, if we don't set the guest PKRU value here(kvm_load_guest_xsave_state),
the guest can read the host value.

In case of kvm_load_host_xsave_state, guest with CR4.PKE clear could
potentially use XRSTOR to change the host PKRU value.

While at it, move pkru state save/restore to common code and the
host_pkru field to kvm_vcpu_arch.  This will let SVM support protection keys.

Cc: stable@vger.kernel.org
Reported-by: NJim Mattson <jmattson@google.com>
Signed-off-by: NBabu Moger <babu.moger@amd.com>
Message-Id: <158932794619.44260.14508381096663848853.stgit@naples-babu.amd.com>
Signed-off-by: NPaolo Bonzini <pbonzini@redhat.com>

The commit 64b5bd27 ("KVM: nSVM: ignore L1 interrupt window
while running L2 with V_INTR_MASKING=1") introduced a WARN_ON,
which checks if AVIC is enabled when trying to set V_IRQ
in the VMCB for enabling irq window.

The following warning is triggered because the requesting vcpu
(to deactivate AVIC) does not get to process APICv update request
for itself until the next #vmexit.

WARNING: CPU: 0 PID: 118232 at arch/x86/kvm/svm/svm.c:1372 enable_irq_window+0x6a/0xa0 [kvm_amd]
 RIP: 0010:enable_irq_window+0x6a/0xa0 [kvm_amd]
 Call Trace:
  kvm_arch_vcpu_ioctl_run+0x6e3/0x1b50 [kvm]
  ? kvm_vm_ioctl_irq_line+0x27/0x40 [kvm]
  ? _copy_to_user+0x26/0x30
  ? kvm_vm_ioctl+0xb3e/0xd90 [kvm]
  ? set_next_entity+0x78/0xc0
  kvm_vcpu_ioctl+0x236/0x610 [kvm]
  ksys_ioctl+0x8a/0xc0
  __x64_sys_ioctl+0x1a/0x20
  do_syscall_64+0x58/0x210
  entry_SYSCALL_64_after_hwframe+0x44/0xa9

Fixes by sending APICV update request to all other vcpus, and
immediately update APIC for itself.
Signed-off-by: NSuravee Suthikulpanit <suravee.suthikulpanit@amd.com>
Link: https://lkml.org/lkml/2020/5/2/167
Fixes: 64b5bd27 ("KVM: nSVM: ignore L1 interrupt window while running L2 with V_INTR_MASKING=1")
Message-Id: <1588818939-54264-1-git-send-email-suravee.suthikulpanit@amd.com>
Signed-off-by: NPaolo Bonzini <pbonzini@redhat.com>

This allows making request to all other vcpus except the one
specified in the parameter.
Signed-off-by: NSuravee Suthikulpanit <suravee.suthikulpanit@amd.com>
Message-Id: <1588771076-73790-2-git-send-email-suravee.suthikulpanit@amd.com>
Signed-off-by: NPaolo Bonzini <pbonzini@redhat.com>

When KVM_EXIT_DEBUG is raised for the disabled-breakpoints case (DR7.GD),
DR6 was incorrectly copied from the value in the VM.  Instead,
DR6.BD should be set in order to catch this case.

On AMD this does not need any special code because the processor triggers
a #DB exception that is intercepted.  However, the testcase would fail
without the previous patch because both DR6.BS and DR6.BD would be set.
Signed-off-by: NPaolo Bonzini <pbonzini@redhat.com>

There are two issues with KVM_EXIT_DEBUG on AMD, whose root cause is the
different handling of DR6 on intercepted #DB exceptions on Intel and AMD.

On Intel, #DB exceptions transmit the DR6 value via the exit qualification
field of the VMCS, and the exit qualification only contains the description
of the precise event that caused a vmexit.

On AMD, instead the DR6 field of the VMCB is filled in as if the #DB exception
was to be injected into the guest.  This has two effects when guest debugging
is in use:

* the guest DR6 is clobbered

* the kvm_run->debug.arch.dr6 field can accumulate more debug events, rather
than just the last one that happened (the testcase in the next patch covers
this issue).

This patch fixes both issues by emulating, so to speak, the Intel behavior
on AMD processors.  The important observation is that (after the previous
patches) the VMCB value of DR6 is only ever observable from the guest is
KVM_DEBUGREG_WONT_EXIT is set.  Therefore we can actually set vmcb->save.dr6
to any value we want as long as KVM_DEBUGREG_WONT_EXIT is clear, which it
will be if guest debugging is enabled.

Therefore it is possible to enter the guest with an all-zero DR6,
reconstruct the #DB payload from the DR6 we get at exit time, and let
kvm_deliver_exception_payload move the newly set bits into vcpu->arch.dr6.
Some extra bits may be included in the payload if KVM_DEBUGREG_WONT_EXIT
is set, but this is harmless.

This may not be the most optimized way to deal with this, but it is
simple and, being confined within SVM code, it gets rid of the set_dr6
callback and kvm_update_dr6.
Signed-off-by: NPaolo Bonzini <pbonzini@redhat.com>

kvm_x86_ops.set_dr6 is only ever called with vcpu->arch.dr6 as the
second argument.  Ensure that the VMCB value is synchronized to
vcpu->arch.dr6 on #DB (both "normal" and nested) and nested vmentry, so
that the current value of DR6 is always available in vcpu->arch.dr6.
The get_dr6 callback can just access vcpu->arch.dr6 and becomes redundant.
Signed-off-by: NPaolo Bonzini <pbonzini@redhat.com>

Signed-off-by: NPaolo Bonzini <pbonzini@redhat.com>

Covers fundamental tests for KVM_SET_GUEST_DEBUG. It is very close to the debug
test in kvm-unit-test, but doing it from outside the guest.
Signed-off-by: NPeter Xu <peterx@redhat.com>
Message-Id: <20200505205000.188252-4-peterx@redhat.com>
Signed-off-by: NPaolo Bonzini <pbonzini@redhat.com>

When single-step triggered with KVM_SET_GUEST_DEBUG, we should fill in the pc
value with current linear RIP rather than the cached singlestep address.
Signed-off-by: NPeter Xu <peterx@redhat.com>
Message-Id: <20200505205000.188252-3-peterx@redhat.com>
Signed-off-by: NPaolo Bonzini <pbonzini@redhat.com>

RTM should always been set even with KVM_EXIT_DEBUG on #DB.
Signed-off-by: NPeter Xu <peterx@redhat.com>
Message-Id: <20200505205000.188252-2-peterx@redhat.com>
Signed-off-by: NPaolo Bonzini <pbonzini@redhat.com>

Go through kvm_queue_exception_p so that the payload is correctly delivered
through the exit qualification, and add a kvm_update_dr6 call to
kvm_deliver_exception_payload that is needed on AMD.
Reported-by: NPeter Xu <peterx@redhat.com>
Reviewed-by: NPeter Xu <peterx@redhat.com>
Signed-off-by: NPaolo Bonzini <pbonzini@redhat.com>

KVM_CAP_SET_GUEST_DEBUG should be supported for x86 however it's not declared
as supported.  My wild guess is that userspaces like QEMU are using "#ifdef
KVM_CAP_SET_GUEST_DEBUG" to check for the capability instead, but that could be
wrong because the compilation host may not be the runtime host.

The userspace might still want to keep the old "#ifdef" though to not break the
guest debug on old kernels.
Signed-off-by: NPeter Xu <peterx@redhat.com>
Message-Id: <20200505154750.126300-1-peterx@redhat.com>
[Do the same for PPC and s390. - Paolo]
Signed-off-by: NPaolo Bonzini <pbonzini@redhat.com>

I got this error when building kvm selftests:

/usr/bin/ld: /home/xz/git/linux/tools/testing/selftests/kvm/libkvm.a(vmx.o):/home/xz/git/linux/tools/testing/selftests/kvm/include/evmcs.h:222: multiple definition of `current_evmcs'; /tmp/cco1G48P.o:/home/xz/git/linux/tools/testing/selftests/kvm/include/evmcs.h:222: first defined here
/usr/bin/ld: /home/xz/git/linux/tools/testing/selftests/kvm/libkvm.a(vmx.o):/home/xz/git/linux/tools/testing/selftests/kvm/include/evmcs.h:223: multiple definition of `current_vp_assist'; /tmp/cco1G48P.o:/home/xz/git/linux/tools/testing/selftests/kvm/include/evmcs.h:223: first defined here

I think it's because evmcs.h is included both in a test file and a lib file so
the structs have multiple declarations when linking.  After all it's not a good
habit to declare structs in the header files.

Cc: Vitaly Kuznetsov <vkuznets@redhat.com>
Signed-off-by: NPeter Xu <peterx@redhat.com>
Message-Id: <20200504220607.99627-1-peterx@redhat.com>
Signed-off-by: NPaolo Bonzini <pbonzini@redhat.com>

Using CPUID data can be useful for the processor compatibility
check, but that's it.  Using it to compute guest-reserved bits
can have both false positives (such as LA57 and UMIP which we
are already handling) and false negatives: in particular, with
this patch we don't allow anymore a KVM guest to set CR4.PKE
when CR4.PKE is clear on the host.

Fixes: b9dd21e1 ("KVM: x86: simplify handling of PKRU")
Reported-by: NJim Mattson <jmattson@google.com>
Tested-by: NJim Mattson <jmattson@google.com>
Signed-off-by: NPaolo Bonzini <pbonzini@redhat.com>

Clear CF and ZF in the VM-Exit path after doing __FILL_RETURN_BUFFER so
that KVM doesn't interpret clobbered RFLAGS as a VM-Fail.  Filling the
RSB has always clobbered RFLAGS, its current incarnation just happens
clear CF and ZF in the processs.  Relying on the macro to clear CF and
ZF is extremely fragile, e.g. commit 089dd8e5 ("x86/speculation:
Change FILL_RETURN_BUFFER to work with objtool") tweaks the loop such
that the ZF flag is always set.
Reported-by: NQian Cai <cai@lca.pw>
Cc: Rick Edgecombe <rick.p.edgecombe@intel.com>
Cc: Peter Zijlstra (Intel) <peterz@infradead.org>
Cc: Josh Poimboeuf <jpoimboe@redhat.com>
Cc: stable@vger.kernel.org
Fixes: f2fde6a5 ("KVM: VMX: Move RSB stuffing to before the first RET after VM-Exit")
Signed-off-by: NSean Christopherson <sean.j.christopherson@intel.com>
Message-Id: <20200506035355.2242-1-sean.j.christopherson@intel.com>
Signed-off-by: NPaolo Bonzini <pbonzini@redhat.com>

This is a rewrite of this[1] Wiki page with further enhancements.  The
doc also includes a section on debugging problems in nested
environments, among other improvements.

[1] https://www.linux-kvm.org/page/Nested_GuestsSigned-off-by: NKashyap Chamarthy <kchamart@redhat.com>
Message-Id: <20200505112839.30534-1-kchamart@redhat.com>
Signed-off-by: NPaolo Bonzini <pbonzini@redhat.com>

Commit f458d039 ("kvm: ioapic: Lazy update IOAPIC EOI") introduces
the following infinite loop:

BUG: stack guard page was hit at 000000008f595917 \
(stack is 00000000bdefe5a4..00000000ae2b06f5)
kernel stack overflow (double-fault): 0000 [#1] SMP NOPTI
RIP: 0010:kvm_set_irq+0x51/0x160 [kvm]
Call Trace:
 irqfd_resampler_ack+0x32/0x90 [kvm]
 kvm_notify_acked_irq+0x62/0xd0 [kvm]
 kvm_ioapic_update_eoi_one.isra.0+0x30/0x120 [kvm]
 ioapic_set_irq+0x20e/0x240 [kvm]
 kvm_ioapic_set_irq+0x5c/0x80 [kvm]
 kvm_set_irq+0xbb/0x160 [kvm]
 ? kvm_hv_set_sint+0x20/0x20 [kvm]
 irqfd_resampler_ack+0x32/0x90 [kvm]
 kvm_notify_acked_irq+0x62/0xd0 [kvm]
 kvm_ioapic_update_eoi_one.isra.0+0x30/0x120 [kvm]
 ioapic_set_irq+0x20e/0x240 [kvm]
 kvm_ioapic_set_irq+0x5c/0x80 [kvm]
 kvm_set_irq+0xbb/0x160 [kvm]
 ? kvm_hv_set_sint+0x20/0x20 [kvm]
....

The re-entrancy happens because the irq state is the OR of
the interrupt state and the resamplefd state.  That is, we don't
want to show the state as 0 until we've had a chance to set the
resamplefd.  But if the interrupt has _not_ gone low then
ioapic_set_irq is invoked again, causing an infinite loop.

This can only happen for a level-triggered interrupt, otherwise
irqfd_inject would immediately set the KVM_USERSPACE_IRQ_SOURCE_ID high
and then low.  Fortunately, in the case of level-triggered interrupts the VMEXIT already happens because
TMR is set.  Thus, fix the bug by restricting the lazy invocation
of the ack notifier to edge-triggered interrupts, the only ones that
need it.
Tested-by: NSuravee Suthikulpanit <suravee.suthikulpanit@amd.com>
Reported-by: borisvk@bstnet.org
Suggested-by: NPaolo Bonzini <pbonzini@redhat.com>
Link: https://www.spinics.net/lists/kvm/msg213512.html
Fixes: f458d039 ("kvm: ioapic: Lazy update IOAPIC EOI")
Bugzilla: https://bugzilla.kernel.org/show_bug.cgi?id=207489Signed-off-by: NPaolo Bonzini <pbonzini@redhat.com>