Introduce a new bool invalidate_gpa argument to kvm_x86_ops->tlb_flush,
it will be used by later patches to just flush guest tlb.

For VMX, this will use INVVPID instead of INVEPT, which will invalidate
combined mappings while keeping guest-physical mappings.

Cc: Paolo Bonzini <pbonzini@redhat.com>
Cc: Radim Krčmář <rkrcmar@redhat.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Signed-off-by: NWanpeng Li <wanpeng.li@hotmail.com>
Signed-off-by: NPaolo Bonzini <pbonzini@redhat.com>
Signed-off-by: NRadim Krčmář <rkrcmar@redhat.com>

Remote TLB flush does a busy wait which is fine in bare-metal
scenario. But with-in the guest, the vcpus might have been pre-empted or
blocked. In this scenario, the initator vcpu would end up busy-waiting
for a long amount of time; it also consumes CPU unnecessarily to wake
up the target of the shootdown.

This patch set adds support for KVM's new paravirtualized TLB flush;
remote TLB flush does not wait for vcpus that are sleeping, instead
KVM will flush the TLB as soon as the vCPU starts running again.

The improvement is clearly visible when the host is overcommitted; in this
case, the PV TLB flush (in addition to avoiding the wait on the main CPU)
prevents preempted vCPUs from stealing precious execution time from the
running ones.

Testing on a Xeon Gold 6142 2.6GHz 2 sockets, 32 cores, 64 threads,
so 64 pCPUs, and each VM is 64 vCPUs.

ebizzy -M
              vanilla    optimized     boost
1VM            46799       48670         4%
2VM            23962       42691        78%
3VM            16152       37539       132%

Cc: Paolo Bonzini <pbonzini@redhat.com>
Cc: Radim Krčmář <rkrcmar@redhat.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Signed-off-by: NWanpeng Li <wanpeng.li@hotmail.com>
Signed-off-by: NPaolo Bonzini <pbonzini@redhat.com>
Signed-off-by: NRadim Krčmář <rkrcmar@redhat.com>

The next patch will add another bit to the preempted field in
kvm_steal_time.  Define a constant for bit 0 (the only one that is
currently used).

Cc: Paolo Bonzini <pbonzini@redhat.com>
Cc: Radim Krčmář <rkrcmar@redhat.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Signed-off-by: NWanpeng Li <wanpeng.li@hotmail.com>
Signed-off-by: NPaolo Bonzini <pbonzini@redhat.com>
Signed-off-by: NRadim Krčmář <rkrcmar@redhat.com>

After the vcpu_load/vcpu_put pushdown, the handling of asynchronous VCPU
ioctl is already much clearer in that it is obvious that they bypass
vcpu_load and vcpu_put.

However, it is still not perfect in that the different state of the VCPU
mutex is still hidden in the caller.  Separate those ioctls into a new
function kvm_arch_vcpu_async_ioctl that returns -ENOIOCTLCMD for more
"traditional" synchronous ioctls.

Cc: James Hogan <jhogan@kernel.org>
Cc: Paul Mackerras <paulus@ozlabs.org>
Cc: Christian Borntraeger <borntraeger@de.ibm.com>
Reviewed-by: NChristoffer Dall <christoffer.dall@linaro.org>
Reviewed-by: NCornelia Huck <cohuck@redhat.com>
Suggested-by: NCornelia Huck <cohuck@redhat.com>
Signed-off-by: NPaolo Bonzini <pbonzini@redhat.com>

Move the calls to vcpu_load() and vcpu_put() in to the architecture
specific implementations of kvm_arch_vcpu_ioctl() which dispatches
further architecture-specific ioctls on to other functions.

Some architectures support asynchronous vcpu ioctls which cannot call
vcpu_load() or take the vcpu->mutex, because that would prevent
concurrent execution with a running VCPU, which is the intended purpose
of these ioctls, for example because they inject interrupts.

We repeat the separate checks for these specifics in the architecture
code for MIPS, S390 and PPC, and avoid taking the vcpu->mutex and
calling vcpu_load for these ioctls.
Signed-off-by: NChristoffer Dall <christoffer.dall@linaro.org>
Signed-off-by: NPaolo Bonzini <pbonzini@redhat.com>

Move vcpu_load() and vcpu_put() into the architecture specific
implementations of kvm_arch_vcpu_ioctl_set_fpu().
Reviewed-by: NDavid Hildenbrand <david@redhat.com>
Signed-off-by: NChristoffer Dall <christoffer.dall@linaro.org>
Reviewed-by: NCornelia Huck <cohuck@redhat.com>
Signed-off-by: NPaolo Bonzini <pbonzini@redhat.com>

Move vcpu_load() and vcpu_put() into the architecture specific
implementations of kvm_arch_vcpu_ioctl_get_fpu().
Reviewed-by: NDavid Hildenbrand <david@redhat.com>
Signed-off-by: NChristoffer Dall <christoffer.dall@linaro.org>
Reviewed-by: NCornelia Huck <cohuck@redhat.com>
Signed-off-by: NPaolo Bonzini <pbonzini@redhat.com>

Move vcpu_load() and vcpu_put() into the architecture specific
implementations of kvm_arch_vcpu_ioctl_set_guest_debug().
Reviewed-by: NDavid Hildenbrand <david@redhat.com>
Signed-off-by: NChristoffer Dall <christoffer.dall@linaro.org>
Reviewed-by: NCornelia Huck <cohuck@redhat.com>
Signed-off-by: NPaolo Bonzini <pbonzini@redhat.com>

Move vcpu_load() and vcpu_put() into the architecture specific
implementations of kvm_arch_vcpu_ioctl_translate().
Reviewed-by: NDavid Hildenbrand <david@redhat.com>
Signed-off-by: NChristoffer Dall <christoffer.dall@linaro.org>
Reviewed-by: NCornelia Huck <cohuck@redhat.com>
Signed-off-by: NPaolo Bonzini <pbonzini@redhat.com>

Move vcpu_load() and vcpu_put() into the architecture specific
implementations of kvm_arch_vcpu_ioctl_set_mpstate().
Reviewed-by: NDavid Hildenbrand <david@redhat.com>
Signed-off-by: NChristoffer Dall <christoffer.dall@linaro.org>
Reviewed-by: NCornelia Huck <cohuck@redhat.com>
Signed-off-by: NPaolo Bonzini <pbonzini@redhat.com>

Move vcpu_load() and vcpu_put() into the architecture specific
implementations of kvm_arch_vcpu_ioctl_get_mpstate().
Reviewed-by: NDavid Hildenbrand <david@redhat.com>
Signed-off-by: NChristoffer Dall <christoffer.dall@linaro.org>
Reviewed-by: NCornelia Huck <cohuck@redhat.com>
Signed-off-by: NPaolo Bonzini <pbonzini@redhat.com>

Move vcpu_load() and vcpu_put() into the architecture specific
implementations of kvm_arch_vcpu_ioctl_set_sregs().
Signed-off-by: NChristoffer Dall <christoffer.dall@linaro.org>
Reviewed-by: NDavid Hildenbrand <david@redhat.com>
Reviewed-by: NCornelia Huck <cohuck@redhat.com>
Signed-off-by: NPaolo Bonzini <pbonzini@redhat.com>

Move vcpu_load() and vcpu_put() into the architecture specific
implementations of kvm_arch_vcpu_ioctl_get_sregs().
Signed-off-by: NChristoffer Dall <christoffer.dall@linaro.org>
Reviewed-by: NDavid Hildenbrand <david@redhat.com>
Reviewed-by: NCornelia Huck <cohuck@redhat.com>
Signed-off-by: NPaolo Bonzini <pbonzini@redhat.com>

Move vcpu_load() and vcpu_put() into the architecture specific
implementations of kvm_arch_vcpu_ioctl_set_regs().
Signed-off-by: NChristoffer Dall <christoffer.dall@linaro.org>
Reviewed-by: NDavid Hildenbrand <david@redhat.com>
Reviewed-by: NCornelia Huck <cohuck@redhat.com>
Signed-off-by: NPaolo Bonzini <pbonzini@redhat.com>

Move vcpu_load() and vcpu_put() into the architecture specific
implementations of kvm_arch_vcpu_ioctl_get_regs().
Signed-off-by: NChristoffer Dall <christoffer.dall@linaro.org>
Reviewed-by: NDavid Hildenbrand <david@redhat.com>
Reviewed-by: NCornelia Huck <cohuck@redhat.com>
Signed-off-by: NPaolo Bonzini <pbonzini@redhat.com>

Move vcpu_load() and vcpu_put() into the architecture specific
implementations of kvm_arch_vcpu_ioctl_run().
Signed-off-by: NChristoffer Dall <christoffer.dall@linaro.org>
Reviewed-by: Christian Borntraeger <borntraeger@de.ibm.com> # s390 parts
Reviewed-by: NCornelia Huck <cohuck@redhat.com>
[Rebased. - Paolo]
Signed-off-by: NPaolo Bonzini <pbonzini@redhat.com>

As we're about to call vcpu_load() from architecture-specific
implementations of the KVM vcpu ioctls, but yet we access data
structures protected by the vcpu->mutex in the generic code, factor
this logic out from vcpu_load().

x86 is the only architecture which calls vcpu_load() outside of the main
vcpu ioctl function, and these calls will no longer take the vcpu mutex
following this patch.  However, with the exception of
kvm_arch_vcpu_postcreate (see below), the callers are either in the
creation or destruction path of the VCPU, which means there cannot be
any concurrent access to the data structure, because the file descriptor
is not yet accessible, or is already gone.

kvm_arch_vcpu_postcreate makes the newly created vcpu potentially
accessible by other in-kernel threads through the kvm->vcpus array, and
we therefore take the vcpu mutex in this case directly.
Signed-off-by: NChristoffer Dall <christoffer.dall@linaro.org>
Reviewed-by: NCornelia Huck <cohuck@redhat.com>
Signed-off-by: NPaolo Bonzini <pbonzini@redhat.com>

Since KVM removes the only I/O port 0x80 bypass on Intel hosts,
clear CPU_BASED_USE_IO_BITMAPS and set CPU_BASED_UNCOND_IO_EXITING
bit. Then these I/O permission bitmaps are not used at all, so
drop I/O permission bitmaps.
Signed-off-by: NJim Mattson <jmattson@google.com>
Signed-off-by: NRadim KrÄmář <rkrcmar@redhat.com>
Signed-off-by: NQuan Xu <quan.xu0@gmail.com>
Signed-off-by: NPaolo Bonzini <pbonzini@redhat.com>

When I run ebizzy in a 32 vCPUs guest on a 32 pCPUs Xeon box, I can observe
~8000 kvm_wait_lapic_expire CurAvg/s through kvm_stat tool even if the advance
tscdeadline hrtimer expiration is disabled. Each call to wait_lapic_expire()
will consume ~70 cycles when a timer fires since apic_timer_expire() will
set expired_tscdeadline and then wait_lapic_expire() will do some caculation
before bailing out. So total ~175us per second is lost on this 3.2Ghz machine.
This patch reduces the overhead by skipping the function wait_lapic_expire()
when lapic_timer_advance is disabled.

Cc: Paolo Bonzini <pbonzini@redhat.com>
Cc: Radim Krčmář <rkrcmar@redhat.com>
Signed-off-by: NWanpeng Li <wanpeng.li@hotmail.com>
Signed-off-by: NPaolo Bonzini <pbonzini@redhat.com>

MSR_IA32_DEBUGCTLMSR is zeroed on VMEXIT, so it is saved/restored each
time during world switch.  This patch caches the host IA32_DEBUGCTL MSR
and saves/restores the host IA32_DEBUGCTL msr when guest/host switches
to avoid to save/restore each time during world switch.  This saves
about 100 clock cycles per vmexit.
Suggested-by: NJim Mattson <jmattson@google.com>
Cc: Paolo Bonzini <pbonzini@redhat.com>
Cc: Radim Krčmář <rkrcmar@redhat.com>
Cc: Jim Mattson <jmattson@google.com>
Signed-off-by: NWanpeng Li <wanpeng.li@hotmail.com>
Reviewed-by: NJim Mattson <jmattson@google.com>
Reviewed-by: NDavid Hildenbrand <david@redhat.com>
Signed-off-by: NRadim Krčmář <rkrcmar@redhat.com>

When attempting to free a loaded VMCS02, add a WARN and avoid
freeing it (to avoid use-after-free situations).
Suggested-by: NPaolo Bonzini <pbonzini@redhat.com>
Signed-off-by: NMark Kanda <mark.kanda@oracle.com>
Reviewed-by: NAmeya More <ameya.more@oracle.com>
Reviewed-by: NKrish Sadhukhan <krish.sadhukhan@oracle.com>
Reviewed-by: NDavid Hildenbrand <david@redhat.com>
Reviewed-by: NPaolo Bonzini <pbonzini@redhat.com>
Signed-off-by: NRadim Krčmář <rkrcmar@redhat.com>

The potential performance advantages of a vmcs02 pool have never been
realized. To simplify the code, eliminate the pool. Instead, a single
vmcs02 is allocated per VCPU when the VCPU enters VMX operation.
Signed-off-by: NJim Mattson <jmattson@google.com>
Signed-off-by: NMark Kanda <mark.kanda@oracle.com>
Reviewed-by: NAmeya More <ameya.more@oracle.com>
Reviewed-by: NDavid Hildenbrand <david@redhat.com>
Reviewed-by: NPaolo Bonzini <pbonzini@redhat.com>
Signed-off-by: NRadim Krčmář <rkrcmar@redhat.com>

Intel IceLake cpu has added new cpu features,AVX512_VBMI2/GFNI/
VAES/VPCLMULQDQ/AVX512_VNNI/AVX512_BITALG. Those new cpu features
need expose to guest VM.

The bit definition:
CPUID.(EAX=7,ECX=0):ECX[bit 06] AVX512_VBMI2
CPUID.(EAX=7,ECX=0):ECX[bit 08] GFNI
CPUID.(EAX=7,ECX=0):ECX[bit 09] VAES
CPUID.(EAX=7,ECX=0):ECX[bit 10] VPCLMULQDQ
CPUID.(EAX=7,ECX=0):ECX[bit 11] AVX512_VNNI
CPUID.(EAX=7,ECX=0):ECX[bit 12] AVX512_BITALG

The release document ref below link:
https://software.intel.com/sites/default/files/managed/c5/15/\
architecture-instruction-set-extensions-programming-reference.pdf

The kernel dependency commit in kvm.git:
(c128dbfa)
Signed-off-by: NYang Zhong <yang.zhong@intel.com>
Signed-off-by: NRadim Krčmář <rkrcmar@redhat.com>

This MSR returns the number of #SMIs that occurred on CPU since
boot.

It was seen to be used frequently by ESXi guest.

Patch adds a new vcpu-arch specific var called smi_count to
save the number of #SMIs which occurred on CPU since boot.
It is exposed as a read-only MSR to guest (causing #GP
on wrmsr) in RDMSR/WRMSR emulation code.
MSR_SMI_COUNT is also added to emulated_msrs[] to make sure
user-space can save/restore it for migration purposes.
Signed-off-by: NLiran Alon <liran.alon@oracle.com>
Suggested-by: NPaolo Bonzini <pbonzini@redhat.com>
Reviewed-by: NNikita Leshenko <nikita.leshchenko@oracle.com>
Reviewed-by: NBhavesh Davda <bhavesh.davda@oracle.com>
Signed-off-by: NKonrad Rzeszutek Wilk <konrad.wilk@oracle.com>
Reviewed-by: NPaolo Bonzini <pbonzini@redhat.com>
Reviewed-by: NDavid Hildenbrand <david@redhat.com>
Signed-off-by: NRadim Krčmář <rkrcmar@redhat.com>

If Intel/AMD implements MWAIT, we expect that it works well and only
reject known bugs;  no reason to do it the other way around for minor
vendors.  (Not that they are relevant ATM.)

This allows further simplification of kvm_mwait_in_guest().
And use boot_cpu_has() instead of "cpu_has(&boot_cpu_data," while at it.
Reviewed-by: NAlexander Graf <agraf@suse.de>
Acked-by: NBorislav Petkov <bp@suse.de>
Acked-by: NMichael S. Tsirkin <mst@redhat.com>
Signed-off-by: NRadim Krčmář <rkrcmar@redhat.com>
Signed-off-by: NPaolo Bonzini <pbonzini@redhat.com>

The check was added in some iteration while trying to fix a reported OS
X on Core 2 bug, but that bug is elsewhere.

The comment is misleading because the guest can call MWAIT with ECX = 0
even if we enforce CPUID5_ECX_INTERRUPT_BREAK;  the call would have the
exactly the same effect as if the host didn't have the feature.

A problem is that a QEMU feature exposes CPUID5_ECX_INTERRUPT_BREAK on
CPUs that do not support it.  Removing the check changes behavior on
last Pentium 4 lines (Presler, Dempsey, and Tulsa, which had VMX and
MONITOR while missing INTERRUPT_BREAK) when running a guest OS that uses
MWAIT without checking for its presence (QEMU doesn't expose MONITOR).

The only known OS that ignores the MONITOR flag is old Mac OS X and we
allowed it to bug on Core 2 (MWAIT used to throw #UD and only that OS
noticed), so we can save another 20 lines letting it bug on even older
CPUs.  Alternatively, we can return MWAIT exiting by default and let
userspace toggle it.
Reviewed-by: NAlexander Graf <agraf@suse.de>
Acked-by: NBorislav Petkov <bp@suse.de>
Acked-by: NMichael S. Tsirkin <mst@redhat.com>
Signed-off-by: NRadim Krčmář <rkrcmar@redhat.com>
Signed-off-by: NPaolo Bonzini <pbonzini@redhat.com>

The bug prevents MWAIT from waking up after a write to the monitored
cache line.
KVM might emulate a CPU model that shouldn't have the bug, so the guest
would not employ a workaround and possibly miss wakeups.
Better to avoid the situation.
Reviewed-by: NAlexander Graf <agraf@suse.de>
Acked-by: NBorislav Petkov <bp@suse.de>
Acked-by: NMichael S. Tsirkin <mst@redhat.com>
Signed-off-by: NRadim Krčmář <rkrcmar@redhat.com>
Signed-off-by: NPaolo Bonzini <pbonzini@redhat.com>

The array audit_point_name is local to the source and does not need to
be in global scope, so make it static.

Cleans up sparse warning:
arch/x86/kvm/mmu_audit.c:22:12: warning: symbol 'audit_point_name' was
not declared. Should it be static?
Signed-off-by: NColin Ian King <colin.king@canonical.com>
Signed-off-by: NPaolo Bonzini <pbonzini@redhat.com>

The kvm_mmu_clear_all_pte_masks interface is only used by kvm_mmu_module_init
locally, and does not need to be called by other module, make it static.

This patch cleans up sparse warning:
symbol 'kvm_mmu_clear_all_pte_masks' was not declared. Should it be static?
Signed-off-by: NGimcuan Hui <gimcuan@gmail.com>
Reviewed-by: NDavid Hildenbrand <david@redhat.com>
Signed-off-by: NPaolo Bonzini <pbonzini@redhat.com>

This is encoded as F3 0F C7 /7 with a register argument.  The register
argument is the second array in the group9 GroupDual, while F3 is the
fourth element of a Prefix.
Reviewed-by: NWanpeng Li <wanpeng.li@hotmail.com>
Signed-off-by: NPaolo Bonzini <pbonzini@redhat.com>

UMIP can be emulated almost perfectly on Intel processor by enabling
descriptor-table exits.  SMSW does not cause a vmexit and hence it
cannot be changed into a #GP fault, but all in all it's the most
"innocuous" of the unprivileged instructions that UMIP blocks.

In fact, Linux is _also_ emulating SMSW instructions on behalf of the
program that executes them, because some 16-bit programs expect to use
SMSW to detect vm86 mode, so this is an even smaller issue.
Reviewed-by: NWanpeng Li <wanpeng.li@hotmail.com>
Signed-off-by: NPaolo Bonzini <pbonzini@redhat.com>

The User-Mode Instruction Prevention feature present in recent Intel
processor prevents a group of instructions (sgdt, sidt, sldt, smsw, and
str) from being executed with CPL > 0. Otherwise, a general protection
fault is issued.

UMIP instructions in general are also able to trigger vmexits, so we can
actually emulate UMIP on older processors.  This commit sets up the
infrastructure so that kvm-intel.ko and kvm-amd.ko can set the UMIP
feature bit for CPUID even if the feature is not actually available
in hardware.
Reviewed-by: NWanpeng Li <wanpeng.li@hotmail.com>
Signed-off-by: NPaolo Bonzini <pbonzini@redhat.com>

These are needed to handle the descriptor table vmexits when emulating
UMIP.
Reviewed-by: NWanpeng Li <wanpeng.li@hotmail.com>
Signed-off-by: NPaolo Bonzini <pbonzini@redhat.com>

Add the CPUID bits, make the CR4.UMIP bit not reserved anymore, and
add UMIP support for instructions that are already emulated by KVM.
Reviewed-by: NWanpeng Li <wanpeng.li@hotmail.com>
Signed-off-by: NPaolo Bonzini <pbonzini@redhat.com>

------------[ cut here ]------------
 Bad FPU state detected at kvm_put_guest_fpu+0xd8/0x2d0 [kvm], reinitializing FPU registers.
 WARNING: CPU: 1 PID: 4594 at arch/x86/mm/extable.c:103 ex_handler_fprestore+0x88/0x90
 CPU: 1 PID: 4594 Comm: qemu-system-x86 Tainted: G    B      OE    4.15.0-rc2+ #10
 RIP: 0010:ex_handler_fprestore+0x88/0x90
 Call Trace:
  fixup_exception+0x4e/0x60
  do_general_protection+0xff/0x270
  general_protection+0x22/0x30
 RIP: 0010:kvm_put_guest_fpu+0xd8/0x2d0 [kvm]
 RSP: 0018:ffff8803d5627810 EFLAGS: 00010246
  kvm_vcpu_reset+0x3b4/0x3c0 [kvm]
  kvm_apic_accept_events+0x1c0/0x240 [kvm]
  kvm_arch_vcpu_ioctl_run+0x1658/0x2fb0 [kvm]
  kvm_vcpu_ioctl+0x479/0x880 [kvm]
  do_vfs_ioctl+0x142/0x9a0
  SyS_ioctl+0x74/0x80
  do_syscall_64+0x15f/0x600

where kvm_put_guest_fpu is called without a prior kvm_load_guest_fpu.
To fix it, move kvm_load_guest_fpu to the very beginning of
kvm_arch_vcpu_ioctl_run.

Cc: stable@vger.kernel.org
Fixes: f775b13eSigned-off-by: NPeter Xu <peterx@redhat.com>
Signed-off-by: NPaolo Bonzini <pbonzini@redhat.com>

 *** Guest State ***
 CR0: actual=0x0000000000000030, shadow=0x0000000060000010, gh_mask=fffffffffffffff7
 CR4: actual=0x0000000000002050, shadow=0x0000000000000000, gh_mask=ffffffffffffe871
 CR3 = 0x00000000fffbc000
 RSP = 0x0000000000000000  RIP = 0x0000000000000000
 RFLAGS=0x00000000         DR7 = 0x0000000000000400
        ^^^^^^^^^^

The failed vmentry is triggered by the following testcase when ept=Y:

    #include <unistd.h>
    #include <sys/syscall.h>
    #include <string.h>
    #include <stdint.h>
    #include <linux/kvm.h>
    #include <fcntl.h>
    #include <sys/ioctl.h>

    long r[5];
    int main()
    {
    	r[2] = open("/dev/kvm", O_RDONLY);
    	r[3] = ioctl(r[2], KVM_CREATE_VM, 0);
    	r[4] = ioctl(r[3], KVM_CREATE_VCPU, 7);
    	struct kvm_regs regs = {
    		.rflags = 0,
    	};
    	ioctl(r[4], KVM_SET_REGS, &regs);
    	ioctl(r[4], KVM_RUN, 0);
    }

X86 RFLAGS bit 1 is fixed set, userspace can simply clearing bit 1
of RFLAGS with KVM_SET_REGS ioctl which results in vmentry fails.
This patch fixes it by oring X86_EFLAGS_FIXED during ioctl.

Cc: stable@vger.kernel.org
Suggested-by: NJim Mattson <jmattson@google.com>
Reviewed-by: NDavid Hildenbrand <david@redhat.com>
Reviewed-by: NQuan Xu <quan.xu0@gmail.com>
Cc: Paolo Bonzini <pbonzini@redhat.com>
Cc: Radim Krčmář <rkrcmar@redhat.com>
Cc: Jim Mattson <jmattson@google.com>
Cc: stable@vger.kernel.org
Signed-off-by: NWanpeng Li <wanpeng.li@hotmail.com>
Signed-off-by: NPaolo Bonzini <pbonzini@redhat.com>

The below test case can cause infinite loop in kvm when ept=0.

    #include <unistd.h>
    #include <sys/syscall.h>
    #include <string.h>
    #include <stdint.h>
    #include <linux/kvm.h>
    #include <fcntl.h>
    #include <sys/ioctl.h>

    long r[5];
    int main()
    {
    	r[2] = open("/dev/kvm", O_RDONLY);
    	r[3] = ioctl(r[2], KVM_CREATE_VM, 0);
    	r[4] = ioctl(r[3], KVM_CREATE_VCPU, 7);
    	ioctl(r[4], KVM_RUN, 0);
    }

It doesn't setup the memory regions, mmu_alloc_shadow/direct_roots() in
kvm return 1 when kvm fails to allocate root page table which can result
in beblow infinite loop:

    vcpu_run() {
    	for (;;) {
	    	r = vcpu_enter_guest()::kvm_mmu_reload() returns 1
	    	if (r <= 0)
	    		break;
	    	if (need_resched())
	    		cond_resched();
      }
    }

This patch fixes it by returning -ENOSPC when there is no available kvm mmu
page for root page table.

Cc: Paolo Bonzini <pbonzini@redhat.com>
Cc: Radim Krčmář <rkrcmar@redhat.com>
Cc: stable@vger.kernel.org
Fixes: 26eeb53c (KVM: MMU: Bail out immediately if there is no available mmu page)
Signed-off-by: NWanpeng Li <wanpeng.li@hotmail.com>
Signed-off-by: NPaolo Bonzini <pbonzini@redhat.com>

Commit 4675ff05 ("kmemcheck: rip it out") has removed the code but
for some reason SPDX header stayed in place.  This looks like a rebase
mistake in the mmotm tree or the merge mistake.  Let's drop those
leftovers as well.
Signed-off-by: NMichal Hocko <mhocko@suse.com>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

The clock-names for pclk was wrongly set to "core", but the bindings
specifies "pclk".
This was not cathed until the legacy non-documented bindings were removed.
Reported-by: NAndreas Färber <afaerber@suse.de>
Fixes: f72d6f60 ("ARM64: dts: meson-gx: use stable UART bindings with correct gate clock")
Signed-off-by: NNeil Armstrong <narmstrong@baylibre.com>
Signed-off-by: NKevin Hilman <khilman@baylibre.com>

In configurations without CONFIG_OMAP3 but with secure RAM support,
we now run into a link failure:

arch/arm/mach-omap2/omap-secure.o: In function `omap3_save_secure_ram':
omap-secure.c:(.text+0x130): undefined reference to `save_secure_ram_context'

The omap3_save_secure_ram() function is only called from the OMAP34xx
power management code, so we can simply hide that function in the
appropriate #ifdef.

Fixes: d09220a8 ("ARM: OMAP2+: Fix SRAM virt to phys translation for save_secure_ram_context")
Acked-by: NTony Lindgren <tony@atomide.com>
Tested-by: NDan Murphy <dmurphy@ti.com>
Signed-off-by: NArnd Bergmann <arnd@arndb.de>