- 18 7月, 2007 40 次提交
-
-
由 Alex Tomas 提交于
Add more run-time checking of extent header fields and remove BUG_ON checks so we don't panic the kernel just because the on-disk filesystem is corrupted. Signed-off-by: NAlex Tomas <alex@clusterfs.com> Signed-off-by: NMingming Cao <cmm@us.ibm.com> Signed-off-by: N"Theodore Ts'o" <tytso@mit.edu>
-
由 Jan Kara 提交于
Propagate flags such as S_APPEND, S_IMMUTABLE, etc. from i_flags into ext4-specific i_flags. Quota code changes these flags on quota files (to make it harder for sysadmin to screw himself) and these changes were not correctly propagated into the filesystem. (This is a forward port patch from ext3) Signed-off-by: NJan Kara <jack@suse.cz> Signed-off-by: NMingming Cao <cmm@us.ibm.com> Signed-off-by: N"Theodore Ts'o" <tytso@mit.edu>
-
由 Mingming Cao 提交于
Turn on extents feature by default in ext4 filesystem, to get wider testing of extents feature in ext4dev. This can be disabled using -o noextents. Signed-off-by: NMingming Cao <cmm@us.ibm.com> Signed-off-by: N"Theodore Ts'o" <tytso@mit.edu>
-
由 Amit Arora 提交于
This change was suggested by Andreas Dilger. This patch changes the EXT_MAX_LEN value and extent code which marks/checks uninitialized extents. With this change it will be possible to have initialized extents with 2^15 blocks (earlier the max blocks we could have was 2^15 - 1). This way we can have better extent-to-block alignment. Now, maximum number of blocks we can have in an initialized extent is 2^15 and in an uninitialized extent is 2^15 - 1. Signed-off-by: NAmit Arora <aarora@in.ibm.com>
-
由 Amit Arora 提交于
This patch adds write support to the uninitialized extents that get created when a preallocation is done using fallocate(). It takes care of splitting the extents into multiple (upto three) extents and merging the new split extents with neighbouring ones, if possible. Signed-off-by: NAmit Arora <aarora@in.ibm.com>
-
由 Amit Arora 提交于
This patch implements ->fallocate() inode operation in ext4. With this patch users of ext4 file systems will be able to use fallocate() system call for persistent preallocation. Current implementation only supports preallocation for regular files (directories not supported as of date) with extent maps. This patch does not support block-mapped files currently. Only FALLOC_ALLOCATE and FALLOC_RESV_SPACE modes are being supported as of now. Signed-off-by: NAmit Arora <aarora@in.ibm.com>
-
由 Amit Arora 提交于
fallocate() is a new system call being proposed here which will allow applications to preallocate space to any file(s) in a file system. Each file system implementation that wants to use this feature will need to support an inode operation called ->fallocate(). Applications can use this feature to avoid fragmentation to certain level and thus get faster access speed. With preallocation, applications also get a guarantee of space for particular file(s) - even if later the the system becomes full. Currently, glibc provides an interface called posix_fallocate() which can be used for similar cause. Though this has the advantage of working on all file systems, but it is quite slow (since it writes zeroes to each block that has to be preallocated). Without a doubt, file systems can do this more efficiently within the kernel, by implementing the proposed fallocate() system call. It is expected that posix_fallocate() will be modified to call this new system call first and incase the kernel/filesystem does not implement it, it should fall back to the current implementation of writing zeroes to the new blocks. ToDos: 1. Implementation on other architectures (other than i386, x86_64, and ppc). Patches for s390(x) and ia64 are already available from previous posts, but it was decided that they should be added later once fallocate is in the mainline. Hence not including those patches in this take. 2. Changes to glibc, a) to support fallocate() system call b) to make posix_fallocate() and posix_fallocate64() call fallocate() Signed-off-by: NAmit Arora <aarora@in.ibm.com>
-
由 Paul Mundt 提交于
With the slab zeroing allocations cleanups Christoph stubbed in a generic kzalloc(), which was missed on SLOB. Follow the SLAB/SLUB changes and kill off the __kzalloc() wrapper that SLOB was using. Reported-by: NJan Engelhardt <jengelh@computergmbh.de> Signed-off-by: NPaul Mundt <lethal@linux-sh.org> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
由 Linus Torvalds 提交于
The old IDE driver is not ready to take generic SCSI commands, even if it uses them for some specific issues (ie the tray open/close ioctls for IDE CD-ROM's). Pointed out by Bartlomiej. I'm sure we'll have it fixed properly soon enough, but for now we should not allow it to cause problems. Cc: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com> Cc: Jens Axboe <jens.axboe@oracle.com> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
由 Linus Torvalds 提交于
I really don't see anybody else wanting to select it ;) Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
git://git390.osdl.marist.edu/pub/scm/linux-2.6由 Linus Torvalds 提交于
* 'for-linus' of git://git390.osdl.marist.edu/pub/scm/linux-2.6: [S390] Fix broken logic, SIGA flags must be bitwise ORed [S390] cio: Dont print trailing \0 in modalias_show(). [S390] Simplify stack trace. [S390] z/VM unit record device driver [S390] vmcp cleanup [S390] qdio: output queue stall on FCP and network devices [S390] Fix disassembly of RX_URRD, SI_URD & PC-relative instructions. [S390] Update default configuration.
-
git://git.kernel.org/pub/scm/linux/kernel/git/wim/linux-2.6-watchdog由 Linus Torvalds 提交于
* git://git.kernel.org/pub/scm/linux/kernel/git/wim/linux-2.6-watchdog: (21 commits) [WATCHDOG] at32ap700x_wdt.c - Fix compilation warnings [WATCHDOG] at32ap700x_wdt.c - Add spinlock support [WATCHDOG] at32ap700x_wdt.c - Add nowayout + MAGICCLOSE features [WATCHDOG] at32ap700x_wdt.c - timeout module parameter patch [WATCHDOG] at32ap700x_wdt.c - checkpatch.pl-0.05 clean-up's [WATCHDOG] change s3c2410_wdt to using dev_() macros for output [WATCHDOG] s3c2410_wdt announce initialisation [WATCHDOG] at32ap700x-wdt: add iounmap if probe function fails [WATCHDOG] at32ap700x-wdt: add missing iounmap in _remove [WATCHDOG] watchdog-driver-for-at32ap700x-devices-fix-2 [WATCHDOG] watchdog-driver-for-at32ap700x-devices-fix [WATCHDOG] Watchdog driver for AT32AP700X devices [WATCHDOG] Mixcom Watchdog - CodingStyle clean-up [WATCHDOG] Mixcom Watchdog - clean-up printk's [WATCHDOG] Mixcom Watchdog - clean-up printk's [WATCHDOG] Mixcom Watchdog - checkcard part 2 [WATCHDOG] Mixcom Watchdog - checkcard [WATCHDOG] Mixcom Watchdog - get rid of port offset's [WATCHDOG] Mixcom Watchdog - update "Documentation" [WATCHDOG] Remove the redundant check for pwrite() in EP93XXX watchdog. ...
-
git://git.kernel.dk/data/git/linux-2.6-block由 Linus Torvalds 提交于
* 'bsg' of git://git.kernel.dk/data/git/linux-2.6-block: bsg: fix missing space in version print Don't define empty struct bsg_class_device if !CONFIG_BLK_DEV_BSG bsg: Kconfig updates bsg: minor cleanup bsg: device hash table cleanup bsg: fix initialization error handling bugs bsg: mark FUJITA Tomonori as bsg maintainer bsg: convert to dynamic major bsg: address various review comments
-
git://git.kernel.org/pub/scm/linux/kernel/git/ericvh/v9fs由 Linus Torvalds 提交于
* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/ericvh/v9fs: 9p: fix debug compilation error
-
由 Linus Torvalds 提交于
* 'isdn-cleanup' of master.kernel.org:/pub/scm/linux/kernel/git/jgarzik/misc-2.6: [ISDN] HiSax hfc_pci: minor cleanups [ISDN] HiSax bkm_a4t: split setup into two smaller functions [ISDN] HiSax enternow: split setup into 3 smaller functions [ISDN] HiSax netjet_u: split setup into 3 smaller functions [ISDN] HiSax netjet_s: code movement, prep for hotplug [ISDN] HiSax: move card state alloc/setup code into separate functions [ISDN] HiSax: move card setup into separate function
-
由 Linus Torvalds 提交于
* 'master' of master.kernel.org:/pub/scm/linux/kernel/git/davem/sparc-2.6: [SPARC64]: Kill bogus set_fs(KERNEL_DS) in do_rt_sigreturn(). [SPARC64]: Update defconfig. [SPARC64]: Kill explicit %gl register reference.
-
由 Linus Torvalds 提交于
* 'uninit-var' of master.kernel.org:/pub/scm/linux/kernel/git/jgarzik/misc-2.6: arch/i386/* fs/* ipc/*: mark variables with uninitialized_var() drivers/*: mark variables with uninitialized_var()
-
由 Linus Torvalds 提交于
* 'warnings' of master.kernel.org:/pub/scm/linux/kernel/git/jgarzik/misc-2.6: drivers/atm/ambassador: kill uninit'd var warning, and fix bug [libata] sata_mv: use pci_try_set_mwi() drivers/infiniband/hw/mthca/mthca_qp: kill uninit'd var warning drivers/net/wan/sbni: kill uninit'd var warning drivers/mtd/ubi/eba: minor cleanup: tighten scope of a local var drivers/telephony/ixj: cleanup and fix gcc warning drivers/net/wan/pc300_drv: fix bug caught by gcc warning drivers/usb/misc/auerswald: fix status check, remove redundant check [netdrvr] eepro100, ne2k-pci: abort resume if pci_enable_device() fails [netdrvr] natsemi: Fix device removal bug kernel/auditfilter: kill bogus uninit'd-var compiler warning
-
由 Al Viro 提交于
... or we end up with header include order problems from hell. E.g. on m68k this is 100% fatal - local_irq_enable() there wants preempt_count(), which wants task_struct fields, which we won't have when we are in smp.h pulled from sched.h. Signed-off-by: NAl Viro <viro@zeniv.linux.org.uk> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
由 Oleg Nesterov 提交于
From: Oleg Nesterov <oleg@tv-sign.ru> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Jeff Garzik 提交于
* trim trailing whitespace * remove CONFIG_PCI ifdefs, this driver is always PCI (Kconfig enforced) * remove return statements at the tail of a function * remove indentation levels by returning an error code immediately. Makes the code much more readable, and easier to update to PCI hotplug API. Signed-off-by: NJeff Garzik <jeff@garzik.org>
-
由 Jeff Garzik 提交于
No behavior changes, just code movement. Prep for PCI hotplug API. Well, CONFIG_PCI useless ifdef was removed. Signed-off-by: NJeff Garzik <jeff@garzik.org>
-
由 Jeff Garzik 提交于
No behavior changes, just code movement. Prep for PCI hotplug API. Signed-off-by: NJeff Garzik <jeff@garzik.org>
-
由 Jeff Garzik 提交于
No behavior changes, just code movement. Prep for PCI hotplug API. Signed-off-by: NJeff Garzik <jeff@garzik.org>
-
由 Jeff Garzik 提交于
1) Remove CONFIG_PCI ifdefs. PCI is required in Kconfig. 2) Break up setup_netjet_s() into three separate internal functions. This helps facilitate upcoming use of PCI hotplug API, and in addition makes the code much easier to follow. No code is changed, just moved around. I even kept the out-of-favor "return(0)" style used in the current source code. Signed-off-by: NJeff Garzik <jeff@garzik.org>
-
由 Jeff Garzik 提交于
Just code movement. No code changes or cleanups besides that which is required to call the new functions from the old code site. Signed-off-by: NJeff Garzik <jeff@garzik.org>
-
由 Jeff Garzik 提交于
No behavior changes, just code movement. Signed-off-by: NJeff Garzik <jeff@garzik.org>
-
由 Frank Lichtenheld 提交于
Fixes the following build error: CC sound/pci/mixart/mixart_hwdep.o sound/pci/mixart/mixart_hwdep.c: In function ‘mixart_hwdep_dsp_load’: sound/pci/mixart/mixart_hwdep.c:610: error: implicit declaration of function ‘vmalloc’ sound/pci/mixart/mixart_hwdep.c:617: error: implicit declaration of function ‘vfree’ Signed-off-by: NFrank Lichtenheld <frank@lichtenheld.de> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
由 Frank Lichtenheld 提交于
This fixes the following build-error: CC drivers/parisc/hppb.o drivers/parisc/hppb.c: In function ‘hppb_probe’: drivers/parisc/hppb.c:73: error: implicit declaration of function ‘ccio_request_resource’ Signed-off-by: NFrank Lichtenheld <frank@lichtenheld.de> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
由 Jeff Garzik 提交于
Mark variables with uninitialized_var() if such a warning appears, and analysis proves that the var is initialized properly on all paths it is used. Signed-off-by: NJeff Garzik <jeff@garzik.org>
-
由 Jeff Garzik 提交于
Mark variables in drivers/* with uninitialized_var() if such a warning appears, and analysis proves that the var is initialized properly on all paths it is used. Signed-off-by: NJeff Garzik <jeff@garzik.org>
-
由 Jeff Garzik 提交于
An uninitialized variable warning illuminated an area where indeed the variable was being used without initialization. Unfortunately, after verifying all such paths were fixed, the warning still appears. So we follow the initialization practice of other variables in this function. Signed-off-by: NJeff Garzik <jeff@garzik.org>
-
由 Jeff Garzik 提交于
Because sometimes in life, it's ok to fail. Signed-off-by: NJeff Garzik <jeff@garzik.org>
-
由 Jeff Garzik 提交于
drivers/infiniband/hw/mthca/mthca_qp.c: In function ‘mthca_tavor_post_send’: drivers/infiniband/hw/mthca/mthca_qp.c:1594: warning: ‘f0’ may be used uninitialized in this function drivers/infiniband/hw/mthca/mthca_qp.c: In function ‘mthca_arbel_post_send’: drivers/infiniband/hw/mthca/mthca_qp.c:1949: warning: ‘f0’ may be used uninitialized in this function Initializing 'f0' is not strictly necessary in either case, AFAICS. I was considering use of uninitialized_var(), but looking at the complex flow of control in each function, I feel it is wiser and safer to simply zero the var and be certain of ourselves. Signed-off-by: NJeff Garzik <jeff@garzik.org>
-
由 Jeff Garzik 提交于
It's actually convenient in the code to initialize this and a sister variable to zero. Signed-off-by: NJeff Garzik <jeff@garzik.org>
-
由 Jeff Garzik 提交于
Signed-off-by: NJeff Garzik <jeff@garzik.org>
-
由 Jeff Garzik 提交于
1) Fix gcc uninit'd var warnings by adding 'default' switch stmt labels in two cases. It was lightning-strikes unlikely that a problem would ever arise, but not impossible. 2) Tighten the scope of 'blankword' in two cases. Signed-off-by: NJeff Garzik <jeff@garzik.org>
-
由 Jeff Garzik 提交于
The warning drivers/net/wan/pc300_drv.c: In function ‘cpc_open’: drivers/net/wan/pc300_drv.c:2942: warning: ‘br’ may be used uninitialized in this function was valid. Ensure 'br' is initialized in all cases. Signed-off-by: NJeff Garzik <jeff@garzik.org>
-
由 Jeff Garzik 提交于
1) We should only set 'actual_length' output variable if usb length is known to be good. 2) No need to check actual_length for NULL. The only caller always passes non-NULL value. Signed-off-by: NJeff Garzik <jeff@garzik.org>
-
由 Jeff Garzik 提交于
Signed-off-by: NJeff Garzik <jeff@garzik.org>
-