- 11 12月, 2016 16 次提交
-
-
由 David S. Miller 提交于
Vivien Didelot says: ==================== net: bridge: fast ageing on topology change 802.1D [1] specifies that the bridges in a network must use a short value to age out dynamic entries in the Filtering Database for a period, once a topology change has been communicated by the root bridge. This patchset fixes this for the in-kernel STP implementation. Once the topology change flag is set in a net_bridge instance, the ageing time value is shorten to twice the forward delay used by the topology. When the topology change flag is cleared, the ageing time configured for the bridge is restored. To accomplish that, a new bridge_ageing_time member is added to the net_bridge structure, to store the user configured bridge ageing time. Two helpers are added to offload the ageing time and set the topology change flag in the net_bridge instance. Then the required logic is added in the topology change helper if in-kernel STP is used. This has been tested on the following topology: +--------------+ | root bridge | | 1 2 3 4 | +--+--+--+--+--+ | | | | +--------+ | | | +------| laptop | | | | +--------+ +--+--+--+-----+ | 1 2 3 | | slave bridge | +--------------+ When unplugging/replugging the laptop, the slave bridge (under test) gets the topology change flag sent by the root bridge, and fast ageing is triggered on the bridges. Once the topology change timer of the root bridge expires, the topology change flag is cleared and the configured ageing time is restored on the bridges. A similar test has been done between two bridges under test. When changing the forward delay of the root bridge with: # echo 3000 > /sys/class/net/br0/bridge/forward_delay the ageing time correctly changes on both bridges from 300s to 60s while the TOPOLOGY_CHANGE flag is present. [1] "8.3.5 Notifying topology changes", http://profesores.elo.utfsm.cl/~agv/elo309/doc/802.1D-1998.pdf No change since RFC: https://lkml.org/lkml/2016/10/19/828 ==================== Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Vivien Didelot 提交于
802.1D [1] specifies that the bridges must use a short value to age out dynamic entries in the Filtering Database for a period, once a topology change has been communicated by the root bridge. Add a bridge_ageing_time member in the net_bridge structure to store the bridge ageing time value configured by the user (ioctl/netlink/sysfs). If we are using in-kernel STP, shorten the ageing time value to twice the forward delay used by the topology when the topology change flag is set. When the flag is cleared, restore the configured ageing time. [1] "8.3.5 Notifying topology changes ", http://profesores.elo.utfsm.cl/~agv/elo309/doc/802.1D-1998.pdfSigned-off-by: NVivien Didelot <vivien.didelot@savoirfairelinux.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Vivien Didelot 提交于
Add a __br_set_topology_change helper to set the topology change value. This can be later extended to add actions when the topology change flag is set or cleared. Signed-off-by: NVivien Didelot <vivien.didelot@savoirfairelinux.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Vivien Didelot 提交于
The SWITCHDEV_ATTR_ID_BRIDGE_AGEING_TIME switchdev attr is actually set when initializing a bridge port, and when configuring the bridge ageing time from ioctl/netlink/sysfs. Add a __set_ageing_time helper to offload the ageing time to physical switches, and add the SWITCHDEV_F_DEFER flag since it can be called under bridge lock. Signed-off-by: NVivien Didelot <vivien.didelot@savoirfairelinux.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Philippe Reynes 提交于
The ethtool api {get|set}_settings is deprecated. We move this driver to new api {get|set}_link_ksettings. Signed-off-by: NPhilippe Reynes <tremyfr@gmail.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Ivan Khoronzhuk 提交于
The channels are common for both ndevs in dual emac mode. Hence, keep in sync their rates. Signed-off-by: NIvan Khoronzhuk <ivan.khoronzhuk@linaro.org> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Ivan Khoronzhuk 提交于
Don't re-split res in the following cases: - speed of phys is not changed - speed of phys is changed and no rate limited channels - speed of phys is changed and all channels are rate limited - phy is unlinked while dev is open - phy is linked back but speed is not changed The maximum speed is sum of "linked" phys, thus res are split taken in account two interfaces, both for dual emac mode and for switch mode. Signed-off-by: NIvan Khoronzhuk <ivan.khoronzhuk@linaro.org> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Ivan Khoronzhuk 提交于
Re-split weight along with budget. It simplify code a little and update state after every rate change. Also it's necessarily to move arguments checks to this combined function. Replace maximum rate check for an interface on maximum possible rate. Signed-off-by: NIvan Khoronzhuk <ivan.khoronzhuk@linaro.org> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Ivan Khoronzhuk 提交于
No need to start queues after cpsw is started as it will be done while cpsw_adjust_link(), after phy connection. Signed-off-by: NIvan Khoronzhuk <ivan.khoronzhuk@linaro.org> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Ivan Khoronzhuk 提交于
Use the same, more convenient macros, to get active slave. Signed-off-by: NIvan Khoronzhuk <ivan.khoronzhuk@linaro.org> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Arnd Bergmann 提交于
We previously relied on GENERIC_ALLOCATOR to be selected by CONFIG_ARM, but now we can compile-test the driver on other architectures that don't select it: drivers/net/built-in.o: In function `mvneta_bm_remove': mvneta_bm.c:(.text+0x4ee35): undefined reference to `gen_pool_free' This adds an explicit select for the part of the driver that has the dependency. Fixes: a0627f77 ("net: marvell: Allow drivers to be built with COMPILE_TEST") Signed-off-by: NArnd Bergmann <arnd@arndb.de> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Amit Kushwaha 提交于
This patch removes a newline which was added in socket.c file in net-next Signed-off-by: NAmit Kushwaha <kushwaha.a@samsung.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 WANG Cong 提交于
netlink_chain is called in ->release(), which is apparently a process context, so we don't have to use an atomic notifier here. Signed-off-by: NCong Wang <xiyou.wangcong@gmail.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
git://git.kernel.org/pub/scm/linux/kernel/git/herbert/crypto-2.6由 Linus Torvalds 提交于
Pull crypto fixes from Herbert Xu: "This fixes the following issues: - Fix pointer size when caam is used with AArch64 boot loader on AArch32 kernel. - Fix ahash state corruption in marvell driver. - Fix buggy algif_aed tag handling. - Prevent mcryptd from being used with incompatible algorithms which can cause crashes" * 'linus' of git://git.kernel.org/pub/scm/linux/kernel/git/herbert/crypto-2.6: crypto: algif_aead - fix uninitialized variable warning crypto: mcryptd - Check mcryptd algorithm compatibility crypto: algif_aead - fix AEAD tag memory handling crypto: caam - fix pointer size for AArch64 boot loader, AArch32 kernel crypto: marvell - Don't corrupt state of an STD req for re-stepped ahash crypto: marvell - Don't copy hash operation twice into the SRAM
-
git://git.kernel.org/pub/scm/linux/kernel/git/davem/net由 Linus Torvalds 提交于
Pull networking fixes from David Miller: 1) Limit the number of can filters to avoid > MAX_ORDER allocations. Fix from Marc Kleine-Budde. 2) Limit GSO max size in netvsc driver to avoid problems with NVGRE configurations. From Stephen Hemminger. 3) Return proper error when memory allocation fails in ser_gigaset_init(), from Dan Carpenter. 4) Missing linkage undo in error paths of ipvlan_link_new(), from Gao Feng. 5) Missing necessayr SET_NETDEV_DEV in lantiq and cpmac drivers, from Florian Fainelli. 6) Handle probe deferral properly in smsc911x driver. * git://git.kernel.org/pub/scm/linux/kernel/git/davem/net: net: mlx5: Fix Kconfig help text net: smsc911x: back out silently on probe deferrals ibmveth: set correct gso_size and gso_type net: ethernet: cpmac: Call SET_NETDEV_DEV() net: ethernet: lantiq_etop: Call SET_NETDEV_DEV() vhost-vsock: fix orphan connection reset cxgb4/cxgb4vf: Assign netdev->dev_port with port ID driver: ipvlan: Unlink the upper dev when ipvlan_link_new failed ser_gigaset: return -ENOMEM on error instead of success NET: usb: cdc_mbim: add quirk for supporting Telit LE922A can: peak: fix bad memory access and free sequence phy: Don't increment MDIO bus refcount unless it's a different owner netvsc: reduce maximum GSO size drivers: net: cpsw-phy-sel: Clear RGMII_IDMODE on "rgmii" links can: raw: raw_setsockopt: limit number of can_filter that can be set
-
- 10 12月, 2016 20 次提交
-
-
由 Christopher Covington 提交于
Since the following commit, Infiniband and Ethernet have not been mutually exclusive. Fixes: 4aa17b28 mlx5: Enable mutual support for IB and Ethernet Signed-off-by: NChristopher Covington <cov@codeaurora.org> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Eric Dumazet 提交于
It seems attackers can also send UDP packets with no payload at all. skb_condense() can still be a win in this case. It will be possible to replace the custom code in tcp_add_backlog() to get full benefit from skb_condense() Signed-off-by: NEric Dumazet <edumazet@google.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Linus Walleij 提交于
When trying to get a regulator we may get deferred and we see this noise: smsc911x 1b800000.ethernet-ebi2 (unnamed net_device) (uninitialized): couldn't get regulators -517 Then the driver continues anyway. Which means that the regulator may not be properly retrieved and reference counted, and may be switched off in case noone else is using it. Fix this by returning silently on deferred probe and let the system work it out. Cc: Jeremy Linton <jeremy.linton@arm.com> Signed-off-by: NLinus Walleij <linus.walleij@linaro.org> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 David S. Miller 提交于
Merge tag 'mac80211-next-for-davem-2016-12-09' of git://git.kernel.org/pub/scm/linux/kernel/git/jberg/mac80211-next Johannes Berg says: ==================== Three fixes: * fix a logic bug introduced by a previous cleanup * fix nl80211 attribute confusing (trying to use a single attribute for two purposes) * fix a long-standing BSS leak that happens when an association attempt is abandoned ==================== Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Thomas Falcon 提交于
This patch is based on an earlier one submitted by Jon Maxwell with the following commit message: "We recently encountered a bug where a few customers using ibmveth on the same LPAR hit an issue where a TCP session hung when large receive was enabled. Closer analysis revealed that the session was stuck because the one side was advertising a zero window repeatedly. We narrowed this down to the fact the ibmveth driver did not set gso_size which is translated by TCP into the MSS later up the stack. The MSS is used to calculate the TCP window size and as that was abnormally large, it was calculating a zero window, even although the sockets receive buffer was completely empty." We rely on the Virtual I/O Server partition in a pseries environment to provide the MSS through the TCP header checksum field. The stipulation is that users should not disable checksum offloading if rx packet aggregation is enabled through VIOS. Some firmware offerings provide the MSS in the RX buffer. This is signalled by a bit in the RX queue descriptor. Reviewed-by: NBrian King <brking@linux.vnet.ibm.com> Reviewed-by: NPradeep Satyanarayana <pradeeps@linux.vnet.ibm.com> Reviewed-by: NMarcelo Ricardo Leitner <marcelo.leitner@gmail.com> Reviewed-by: NJonathan Maxwell <jmaxwell37@gmail.com> Reviewed-by: NDavid Dai <zdai@us.ibm.com> Signed-off-by: NThomas Falcon <tlfalcon@linux.vnet.ibm.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 David S. Miller 提交于
Eric Dumazet says: ==================== udp: receive path optimizations This patch series provides about 100 % performance increase under flood. v2: added Paolo feedback on udp_rmem_release() for tiny sk_rcvbuf added the last patch touching sk_rmem_alloc later ==================== Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Eric Dumazet 提交于
In flood situations, keeping sk_rmem_alloc at a high value prevents producers from touching the socket. It makes sense to lower sk_rmem_alloc only at the end of udp_rmem_release() after the thread draining receive queue in udp_recvmsg() finished the writes to sk_forward_alloc. Signed-off-by: NEric Dumazet <edumazet@google.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Eric Dumazet 提交于
If udp_recvmsg() constantly releases sk_rmem_alloc for every read packet, it gives opportunity for producers to immediately grab spinlocks and desperatly try adding another packet, causing false sharing. We can add a simple heuristic to give the signal by batches of ~25 % of the queue capacity. This patch considerably increases performance under flood by about 50 %, since the thread draining the queue is no longer slowed by false sharing. Signed-off-by: NEric Dumazet <edumazet@google.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Eric Dumazet 提交于
In UDP RX handler, we currently clear skb->dev before skb is added to receive queue, because device pointer is no longer available once we exit from RCU section. Since this first cache line is always hot, lets reuse this space to store skb->truesize and thus avoid a cache line miss at udp_recvmsg()/udp_skb_destructor time while receive queue spinlock is held. Signed-off-by: NEric Dumazet <edumazet@google.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Eric Dumazet 提交于
Idea of busylocks is to let producers grab an extra spinlock to relieve pressure on the receive_queue spinlock shared by consumer. This behavior is requested only once socket receive queue is above half occupancy. Under flood, this means that only one producer can be in line trying to acquire the receive_queue spinlock. These busylock can be allocated on a per cpu manner, instead of a per socket one (that would consume a cache line per socket) This patch considerably improves UDP behavior under stress, depending on number of NIC RX queues and/or RPS spread. Signed-off-by: NEric Dumazet <edumazet@google.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 David S. Miller 提交于
Timur Tabi says: ==================== net: qcom/emac: simplify support for different SOCs On SOCs that have the Qualcomm EMAC network controller, the internal PHY block is always different. Sometimes the differences are small, sometimes it might be a completely different IP. Either way, using version numbers to differentiate them and putting all of the init code in one file does not scale. This patchset does two things: The first breaks up the current code into different files, and the second patch adds support for a third SOC, the Qualcomm Technologies QDF2400 ARM Server SOC. ==================== Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Timur Tabi 提交于
The QDF2432 and the QDF2400 have slightly different internal PHYs, so there are some programming differences. Some of the registers in the QDF2400 have moved, and some registers require different values during initialization. Because of the differences, and because HIDs are a scare resource, the ACPI tables specify the hardware version in an _HRV property. Version 1 is the QDF2432, and version 2 is the QDF2400. Any future SOC that has the same internal PHY but different programming requirements will be assigned the next available version number. Signed-off-by: NTimur Tabi <timur@codeaurora.org> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Timur Tabi 提交于
The internal PHY of the EMAC differs on each SOC, and the list will only continue to grow. By separating the code into individual files, we can add support for more SOCs more cleanly. Note: The internal PHY is also sometimes called the SGMII device. We also stop referring to the various PHY variations by version number, so no more "v2", "v3", etc. Instead, the devices are named after the SOC they are, which is in sync with the device tree property names. Future patches will probably rearrange more code among the files. Signed-off-by: NTimur Tabi <timur@codeaurora.org> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
git://git.kernel.org/pub/scm/linux/kernel/git/nvdimm/nvdimm由 Linus Torvalds 提交于
Pull libnvdimm fixes from Dan Williams: "Several fixes to the DSM (ACPI device specific method) marshaling implementation. I consider these urgent enough to send for 4.9 consideration since they fix the kernel's handling of ARS (Address Range Scrub) commands. Especially for platforms without machine-check-recovery capabilities, successful execution of ARS commands enables the platform to potentially break out of an infinite reboot problem if a media error is present in the boot path. There is also a one line fix for a device-dax read-only mapping regression. Commits 9a901f54 ("acpi, nfit: fix extended status translations for ACPI DSMs") and 325896ff ("device-dax: fix private mapping restriction, permit read-only") are true regression fixes for changes introduced this cycle. Commit efda1b5d ("acpi, nfit, libnvdimm: fix / harden ars_status output length handling") fixes the kernel's handling of zero-length results, this never would have worked in the past, but we only just recently discovered a BIOS implementation that emits this arguably spec non-compliant result. The remaining two commits are additional fall out from thinking through the implications of a zero / truncated length result of the ARS Status command. In order to mitigate the risk that these changes introduce yet more regressions they are backstopped by a new unit test in commit a7de92da ("tools/testing/nvdimm: unit test acpi_nfit_ctl()") that mocks up inputs to acpi_nfit_ctl()" * 'libnvdimm-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/nvdimm/nvdimm: device-dax: fix private mapping restriction, permit read-only tools/testing/nvdimm: unit test acpi_nfit_ctl() acpi, nfit: fix bus vs dimm confusion in xlat_status acpi, nfit: validate ars_status output buffer size acpi, nfit, libnvdimm: fix / harden ars_status output length handling acpi, nfit: fix extended status translations for ACPI DSMs
-
git://git.kernel.org/pub/scm/linux/kernel/git/tj/libata由 Linus Torvalds 提交于
Pull libata fixes from Tejun Heo: "This is quite late but SCT Write Same support added during this cycle is broken subtly but seriously and it'd be best to disable it before v4.9 gets released. This contains two commits - one low impact sata_mv fix and the mentioned disabling of SCT Write Same" * 'for-4.9-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/tj/libata: libata-scsi: disable SCT Write Same for the moment ata: sata_mv: check for errors when parsing nr-ports from dt
-
git://github.com/ceph/ceph-client由 Linus Torvalds 提交于
Pull ceph fix from Ilya Dryomov: "A fix for an issue with ->d_revalidate() in ceph, causing frequent kernel crashes. Marked for stable - it goes back to 4.6, but started popping up only in 4.8" * tag 'ceph-for-4.9-rc9' of git://github.com/ceph/ceph-client: ceph: don't set req->r_locked_dir in ceph_d_revalidate
-
git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc由 Linus Torvalds 提交于
Pull ARM SoC fixes from Olof Johansson: "Final batch of SoC fixes A few fixes that have trickled in over the last week, all fixing minor errors in devicetrees -- UART pin assignment on Allwinner H3, correcting number of SATA ports on a Marvell-based Linkstation platform and a display clock fix for Freescale/NXP i.MX7D that fixes a freeze when starting up X" * tag 'armsoc-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: ARM: dts: orion5x: fix number of sata port for linkstation ls-gl ARM: dts: imx7d: fix LCDIF clock assignment dts: sun8i-h3: correct UART3 pin definitions
-
git://git.kernel.org/pub/scm/linux/kernel/git/geert/linux-m68k由 Linus Torvalds 提交于
Pull m68k fixes from Geert Uytterhoeven: - build fix for drivers calling ndelay() in a conditional block without curly braces - defconfig updates * tag 'm68k-for-v4.9-tag2' of git://git.kernel.org/pub/scm/linux/kernel/git/geert/linux-m68k: m68k: Fix ndelay() macro m68k/defconfig: Update defconfigs for v4.9-rc1
-
git://people.freedesktop.org/~airlied/linux由 Linus Torvalds 提交于
Pull drm fix from Dave Airlie: "Just a single fix for amdgpu to just suspend the gpu on 'shutdown' instead of shutting it down fully, as for some reason the hw was getting upset in some situations" * 'drm-fixes' of git://people.freedesktop.org/~airlied/linux: drm/amdgpu: just suspend the hw on pci shutdown
-
由 Linus Torvalds 提交于
This reverts commit 53855d10. It shouldn't have come in yet - it depends on the changes in linux-next that will come in during the next merge window. As Matthew Wilcox says, the test suite is broken with the current state without the revert. Requested-by: NMatthew Wilcox <mawilcox@microsoft.com> Cc: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
- 09 12月, 2016 4 次提交
-
-
由 Johannes Berg 提交于
When mac80211 abandons an association attempt, it may free all the data structures, but inform cfg80211 and userspace about it only by sending the deauth frame it received, in which case cfg80211 has no link to the BSS struct that was used and will not cfg80211_unhold_bss() it. Fix this by providing a way to inform cfg80211 of this with the BSS entry passed, so that it can clean up properly, and use this ability in the appropriate places in mac80211. This isn't ideal: some code is more or less duplicated and tracing is missing. However, it's a fairly small change and it's thus easier to backport - cleanups can come later. Cc: stable@vger.kernel.org Signed-off-by: NJohannes Berg <johannes.berg@intel.com>
-
由 Vamsi Krishna 提交于
NL80211_ATTR_MAC was used to set both the specific BSSID to be scanned and the random MAC address to be used when privacy is enabled. When both the features are enabled, both the BSSID and the local MAC address were getting same value causing Probe Request frames to go with unintended DA. Hence, this has been fixed by using a different NL80211_ATTR_BSSID attribute to set the specific BSSID (which was the more recent addition in cfg80211) for a scan. Backwards compatibility with old userspace software is maintained to some extent by allowing NL80211_ATTR_MAC to be used to set the specific BSSID when scanning without enabling random MAC address use. Scanning with random source MAC address was introduced by commit ad2b26ab ("cfg80211: allow drivers to support random MAC addresses for scan") and the issue was introduced with the addition of the second user for the same attribute in commit 818965d3 ("cfg80211: Allow a scan request for a specific BSSID"). Fixes: 818965d3 ("cfg80211: Allow a scan request for a specific BSSID") Signed-off-by: NVamsi Krishna <vamsin@qti.qualcomm.com> Signed-off-by: NJouni Malinen <jouni@qca.qualcomm.com> Signed-off-by: NJohannes Berg <johannes.berg@intel.com>
-
由 Johannes Berg 提交于
Arend inadvertently inverted the logic while converting to wdev_running(), fix that. Fixes: 73c7da3d ("cfg80211: add generic helper to check interface is running") Signed-off-by: NJohannes Berg <johannes.berg@intel.com>
-
由 Arnd Bergmann 提交于
In some configurations, gcc cannot trace the state of variables across a spin_unlock() barrier, leading to a warning about correct code: xgene_enet_main.c: In function 'xgene_enet_start_xmit': ../../../phy/mdio-xgene.h:112:14: error: 'mss_index' may be used uninitialized in this function [-Werror=maybe-uninitialized] Here we can trivially move the assignment before that spin_unlock, which reliably avoids the warning. Fixes: e3978673 ("drivers: net: xgene: Fix MSS programming") Signed-off-by: NArnd Bergmann <arnd@arndb.de> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-