- 20 6月, 2014 6 次提交
-
-
由 Neerav Parikh 提交于
Fix the debugfs command "lldp get remote" that dumped the local LLDPDU instead of peer's LLDPDU. Change-ID: I0702eacdafd54478c18f20cab3a7fa5dc1b3182d Signed-off-by: NNeerav Parikh <neerav.parikh@intel.com> Signed-off-by: NJeff Kirsher <jeffrey.t.kirsher@intel.com>
-
由 Neerav Parikh 提交于
Introduce helper routines that would wait for the Rx/Tx queue to reach the enable or disable state as requested. Change-ID: I518d9d0e2afef3f45107af3b46e9af402ff587c3 Signed-off-by: NNeerav Parikh <neerav.parikh@intel.com> Signed-off-by: NJeff Kirsher <jeffrey.t.kirsher@intel.com>
-
由 Anjali Singhai Jain 提交于
When we resize the number of queues, the driver needs to disassociate any qvectors that are no longer in use from the original rings, this way we do not try to access the rings through these qvectors at the time of freeing the qvectors. Change-ID: Ie4eb9fc749f8e12348517fe1560f599c58f4a2a4 Signed-off-by: NAnjali Singhai Jain <anjali.singhai@intel.com> Signed-off-by: NJeff Kirsher <jeffrey.t.kirsher@intel.com>
-
由 Michal Kosiarz 提交于
Reset head and tail on admin queue initialization where H/T are not reset by HW. Change-ID: I6db8a2dd3f05ce66410a92cce016191add04760e Signed-off-by: NMichal Kosiarz <michal.kosiarz@intel.com> Signed-off-by: NJeff Kirsher <jeffrey.t.kirsher@intel.com>
-
由 Jesse Brandeburg 提交于
The NVM wasn't filling in the GLQF_HKEY register on some old NVM versions. If this is the case, fill in some values so receive with flow rules works right. Change-ID: Ic737888ee68f96efb4cf8a1a49d2301615e09ed2 Signed-off-by: NJesse Brandeburg <jesse.brandeburg@intel.com> Signed-off-by: NJeff Kirsher <jeffrey.t.kirsher@intel.com>
-
由 Anjali Singhai Jain 提交于
This updates the register file for new hardware. The format of the file has changed requiring drivers to declare I40E_MASK. I40E_MASK is to be used with 32 bit registers. This patch also updates the drivers to accommodate the register changes. Change-ID: If9bc8d736391024cbf99054efe50f9acc12ee4f1 Signed-off-by: NAnjali Singhai Jain <anjali.singhai@intel.com> Signed-off-by: NJeff Kirsher <jeffrey.t.kirsher@intel.com>
-
- 11 6月, 2014 15 次提交
-
-
由 Catherine Sullivan 提交于
Bump versions. Change-ID: Ic4a84354955061ca18321b1e97c9c30fe1563b5c Signed-off-by: NCatherine Sullivan <catherine.sullivan@intel.com> Signed-off-by: NJeff Kirsher <jeffrey.t.kirsher@intel.com>
-
由 Shannon Nelson 提交于
No need to read the PCI register for the PF's base queue on every single Tx queue enable and disable as we already have the value stored from reading the capability features at startup. Change-ID: Ic02fb622757742f43cb8269369c3d972d4f66555 Signed-off-by: NShannon Nelson <shannon.nelson@intel.com> Signed-off-by: NJeff Kirsher <jeffrey.t.kirsher@intel.com>
-
由 Anjali Singhai Jain 提交于
A drop action comes down as a ring_cookie value, so allow it as a special value that can be used to configure destination control. Also fix the output to filter read command accordingly. Change-ID: I9956723cee42f3194885403317dd21ed4a151144 Signed-off-by: NAnjali Singhai Jain <anjali.singhai@intel.com> Signed-off-by: NJeff Kirsher <jeffrey.t.kirsher@intel.com>
-
由 Anjali Singhai Jain 提交于
Add members to stat struct to keep track of Flow director ATR and SideBand filter packet matches. Change-ID: Ibbb31a53c7adcc2bb96991dd80565442a2f2513c Signed-off-by: NAnjali Singhai Jain <anjali.singhai@intel.com> Signed-off-by: NJeff Kirsher <jeffrey.t.kirsher@intel.com>
-
由 Jesse Brandeburg 提交于
This change drops the FTYPE field from the Rx descriptor, to match the hardware implementation. Change-ID: I66d31d2b43861da45e8ace4fb03df033abe88bab Signed-off-by: NJesse Brandeburg <jesse.brandeburg@intel.com> Signed-off-by: NJeff Kirsher <jeffrey.t.kirsher@intel.com>
-
由 Mitch Williams 提交于
FW can indicate any admin queue error states to the driver via some bits in the length registers. Each time we process an admin queue message, check these bits and log any errors we find. Since the VF really can't do much, we just print the message and depend on the PF driver to clear things up on our behalf. Change-ID: I92bc6c53ce3b4400544e0ca19c5de2d27490bd0d Signed-off-by: NMitch Williams <mitch.a.williams@intel.com> Signed-off-by: NJeff Kirsher <jeffrey.t.kirsher@intel.com>
-
由 Greg Rose 提交于
Linux gives us a function to copy Ethernet MAC addresses, let's use it. Change-ID: I0c861900029ca5ea65a53ca39565852fb633f6fd Signed-off-by: NGreg Rose <gregory.v.rose@intel.com> Signed-off-by: NJeff Kirsher <jeffrey.t.kirsher@intel.com>
-
由 Greg Rose 提交于
Remove the filter created by the firmware with the default MAC address it reads out of the NVM storage and a promiscuous VLAN tag and replace it with a filter that will not accept tagged packets by default. The system must request a VLAN tag packet filter to get packets with that tag. Change-ID: I119e6c3603a039bd68282ba31bf26f33a575490a Signed-off-by: NGreg Rose <gregory.v.rose@intel.com> Signed-off-by: NJeff Kirsher <jeffrey.t.kirsher@intel.com>
-
由 Neerav Parikh 提交于
Currently if the firmware reports DCB capability the driver enables I40E_FLAG_DCB_ENABLED flag. When this flag is enabled the driver inserts a tag when transmitting a packet from the port even if there are no DCB traffic classes configured at the port. This patch adds a new flag I40E_FLAG_DCB_CAPABLE that will be set when the DCB capability is present and the existing flag I40E_FLAG_DCB_ENABLED will be set only if there are more than one traffic classes configured at the port. Change-ID: I24ccbf53ef293db2eba80c8a9772acf729795bd5 Signed-off-by: NNeerav Parikh <neerav.parikh@intel.com> Signed-off-by: NJeff Kirsher <jeffrey.t.kirsher@intel.com>
-
由 Mitch Williams 提交于
If the device is down, there's no place to go but up, so don't try to go down even more. This prevents a CPU soft lock in napi_disable(). Change-ID: I8b058b9ee974dfa01c212fae2597f4f54b333314 Signed-off-by: NMitch Williams <mitch.a.williams@intel.com> Signed-off-by: NJeff Kirsher <jeffrey.t.kirsher@intel.com>
-
由 Anjali Singhai Jain 提交于
In XL710 devices we program FD filter's fields from Tx perspective of the flow. However the user interface exposed in ethtool should be compliant with the previous generation of drivers where a filter src and dst field are from the RX perspective. This patch changes the ethtool interface in this regard to match the other drivers. Change-ID: Iec6ccddd87357c4fb53ccf33aa0fae699faf70cf Signed-off-by: NAnjali Singhai Jain <anjali.singhai@intel.com> Signed-off-by: NJeff Kirsher <jeffrey.t.kirsher@intel.com>
-
由 Shannon Nelson 提交于
Add set_pf_context, replace set_phy_reset with set_phy_debug, add nvm_config_read/write, remove nvm_read/write_reg_se and add some PHY types. With these changes we bump the API version to 1.2. Change-ID: I4dc3aec175c2316f66fc9b726b3f7d594699d84e Signed-off-by: NShannon Nelson <shannon.nelson@intel.com> Signed-off-by: NJeff Kirsher <jeffrey.t.kirsher@intel.com>
-
由 Ashish Shah 提交于
Set appropriate fields in Tx queue configuration virtchnl message to pf to enable headwb and setup headwb addr. Then use that info from the VF to set headwb and headwb_addr instead of always enabling them. Change-ID: I7d393d1b2b07f0f3355b3a4f7c2d3c6ee3b0d622 Signed-off-by: NAshish Shah <ashish.n.shah@intel.com> Signed-off-by: NJeff Kirsher <jeffrey.t.kirsher@intel.com>
-
由 Jacob Keller 提交于
This patch separates the hardware logic from the set function, so that we can re-use it during a ptp_reset. This enables the reset to return functionality to the last known timestamp mode, rather than resetting the value. We initialize the mode to off during the ptp_init cycle. Signed-off-by: NJacob Keller <jacob.e.keller@intel.com> Tested-by: NAaron Brown <aaron.f.brown@intel.com> Signed-off-by: NJeff Kirsher <jeffrey.t.kirsher@intel.com>
-
由 Todd Fujinaka 提交于
Return a 0 directly rather than a constant. Reported-by: NPeter Senna Tschudin <peter.senna@gmail.com> Signed-off-by: NTodd Fujinaka <todd.fujinaka@intel.com> Tested-by: NAaron Brown <aaron.f.brown@intel.com> Signed-off-by: NJeff Kirsher <jeffrey.t.kirsher@intel.com>
-
- 09 6月, 2014 13 次提交
-
-
由 Shannon Nelson 提交于
Bumpity and Fred Worm say it's time to change the numbers again. Signed-off-by: NShannon Nelson <shannon.nelson@intel.com> Change-ID: I658731d022ea23cedede4be2bfecd8b4cc68d270 Signed-off-by: NJeff Kirsher <jeffrey.t.kirsher@intel.com>
-
由 Anjali Singhai Jain 提交于
We tell the HW upper boundary of power of 2 in VSI config, but the HW does not restrict us to use just power of 2 GPS in case of RSS as long as we are not sharing the RSS table with another VSI (VMDq). We at present are not doing RSS in VMDq VSI. If we were to enable that and if the system had CPU count which was not power 2, the VMDq VSIs will see a little skewed distribution. Change-ID: I3ea797ce9065a3ca4fc4d04251bf195463410473 Signed-off-by: NAnjali Singhai Jain <anjali.singhai@intel.com> Signed-off-by: NJeff Kirsher <jeffrey.t.kirsher@intel.com>
-
由 Greg Rose 提交于
Delete all the old and stale MAC filters for the VF VSI when the host administrator changes the VF MAC address from under its feet. Also don't bother to add a filter for the VSI when its going to go away anyway. Just record the new address and punch the VF reset. Change-ID: Ic0d12055926f41989d1965ccf500053729c063ad Signed-off-by: NGreg Rose <gregory.v.rose@intel.com> Signed-off-by: NJeff Kirsher <jeffrey.t.kirsher@intel.com>
-
由 Anjali Singhai Jain 提交于
FD_SB and FD_ATR needs to be checked independently in order to decide if we will support multiple queues or not. Change-ID: I9d3274f5924c79e29efdbcf66a2fcca1fee2107f Signed-off-by: NAnjali Singhai Jain <anjali.singhai@intel.com> Signed-off-by: NJeff Kirsher <jeffrey.t.kirsher@intel.com>
-
由 Jesse Brandeburg 提交于
The driver was not marking packets with bad checksums correctly, especially IPv6 packets with a bad checksum. To do this correctly we need a define that may be set by hardware in rare cases. Change-ID: I1a997b72b491ded27a78ac3bce1197b2d2611130 Signed-off-by: NJesse Brandeburg <jesse.brandeburg@intel.com> Signed-off-by: NJeff Kirsher <jeffrey.t.kirsher@intel.com>
-
由 Frank Zhang 提交于
Modify the logic in i40e_determine_queue_usage() so that SR-IOV doesn't get turned off unnecessarily. Change-ID: I86ca304fa9f742a50e9ea831b887f358a6a9d53d Signed-off-by: NFrank Zhang <frank_1.zhang@intel.com> Signed-off-by: NJeff Kirsher <jeffrey.t.kirsher@intel.com>
-
由 Anjali Singhai Jain 提交于
This patch changes the way resources are distributed to special features. Change-ID: I847e49d714a1d70e97f3f994cb39bfb5e02ab016 Signed-off-by: NAnjali Singhai Jain <anjali.singhai@intel.com> Signed-off-by: NJeff Kirsher <jeffrey.t.kirsher@intel.com>
-
由 Mitch Williams 提交于
Our hardware supports VF antispoofing for both MAC addresses and VLANs. Enable this feature by default for all VFs and implement the netdev op to control it from the command line. Change-ID: Ifb941da22785848aa3aba6b2231be135b8ea8f31 Signed-off-by: NMitch Williams <mitch.a.williams@intel.com> Signed-off-by: NJesse Brandeburg <jesse.brandeburg@intel.com> Signed-off-by: NJeff Kirsher <jeffrey.t.kirsher@intel.com>
-
由 Shannon Nelson 提交于
We don't need to complain in the log about mac addresses that can't be deleted because they don't exist. Change-ID: I4e6370df175bf72726f06d2206c03bcbfded8387 Signed-off-by: NShannon Nelson <shannon.nelson@intel.com> Signed-off-by: NJeff Kirsher <jeffrey.t.kirsher@intel.com>
-
由 Shannon Nelson 提交于
This was a vestige of early driver development that no longer has any actual use. Change-ID: I95b5b19c4bbfaff8759197af671ebaf716cb6ab5 Signed-off-by: NShannon Nelson <shannon.nelson@intel.com> Signed-off-by: NJeff Kirsher <jeffrey.t.kirsher@intel.com>
-
由 Mitch Williams 提交于
The number of VSIs that the firmware reports to us is a guaranteed minimum, not an absolute maximum. The hardware actually supports far more than the reported value, which we often need. To allow for this, we allocate space for a larger number of VSIs than is guaranteed by the firmware, with the knowledge that we may fail to get them all in the future. Note that we are just allocating pointers here, the actual (much larger) VSI structures are allocated on demand. Change-ID: I6f4e535ce39d3bf417aef78306e04fbc7505140e Signed-off-by: NMitch Williams <mitch.a.williams@intel.com> Signed-off-by: NJeff Kirsher <jeffrey.t.kirsher@intel.com>
-
由 Catherine Sullivan 提交于
Fix function header comment to have the correct function name. Signed-off-by: NCatherine Sullivan <catherine.sullivan@intel.com> Signed-off-by: NJeff Kirsher <jeffrey.t.kirsher@intel.com>
-
由 Shannon Nelson 提交于
Check for error status bits on the AdminQ event queue and announce them if seen. If the Firmware sets these bits, it will trigger an AdminQ interrupt to get the driver's attention to process the ARQ, which will likely be enough to clear the actual issue. Signed-off-by: NShannon Nelson <shannon.nelson@intel.com> Change-ID: I009e0ebc8be764e40e193b29aed2863f43eb5cb0 Signed-off-by: NJeff Kirsher <jeffrey.t.kirsher@intel.com>
-
- 08 6月, 2014 6 次提交
-
-
由 Catherine Sullivan 提交于
Bump i40e to 0.4.5 and i40evf to 0.9.29. Change-ID: I9faca5544446518c5425612e733499cf16ef20a1 Signed-off-by: NCatherine Sullivan <catherine.sullivan@intel.com> Signed-off-by: NJeff Kirsher <jeffrey.t.kirsher@intel.com>
-
由 Jesse Brandeburg 提交于
Remove two device IDs 1582 and 1573, because they will not be shipped. Change-ID: Ica2e550b5b21a69e3f353eba2fe5e1c532a548c4 Signed-off-by: NJesse Brandeburg <jesse.brandeburg@intel.com> Signed-off-by: NJeff Kirsher <jeffrey.t.kirsher@intel.com>
-
由 Jesse Brandeburg 提交于
Fix a coding error where during the registration for NAPI the driver requested 256 budget. The max recommended value for this is NAPI_POLL_WEIGHT or 64. Change-ID: I03ea1e2934a84ff1b5d572988b18315d6d91c5c6 Signed-off-by: NJesse Brandeburg <jesse.brandeburg@intel.com> Signed-off-by: NJeff Kirsher <jeffrey.t.kirsher@intel.com>
-
由 Jesse Brandeburg 提交于
The TSO logic in the transmit path had some assumptions that have been broken now that the kernel can send as much as 32kB in a single skb->frag[.] entry, even on a system with 4kB pages. This fixes the assumptions and allows the kernel to operate as efficiently as possible with both SENDFILE and SEND. In addition, the hardware limit of data contained in a descriptor is changed to the next power of two below where it currently is in order to align to a power of two value, preventing a single byte of data in a descriptor. Change-ID: I6af1f0b87c1458e10644dbd47541591075a52651 Signed-off-by: NJesse Brandeburg <jesse.brandeburg@intel.com> Signed-off-by: NJeff Kirsher <jeffrey.t.kirsher@intel.com>
-
由 Mitch Williams 提交于
Both the PF side and the VF side of the VF reset process are too noisy. We already warn the user that a reset is happening, and that is sufficient. Because some of these message are inside if statements, we have to rejigger the brackets at the same time to keep our coding style consistent. Change-ID: Id175562fb0ec7c396d9de156b4890e136f52d5f4 Signed-off-by: NMitch Williams <mitch.a.williams@intel.com> Signed-off-by: NJeff Kirsher <jeffrey.t.kirsher@intel.com>
-
由 Mitch Williams 提交于
Once more, with feeling: not all VSIs have rings. To assume so is to invite null pointers to your party. Change-ID: I576858824468d9712d119fa1015a1f28c27712c4 Signed-off-by: NMitch Williams <mitch.a.williams@intel.com> Signed-off-by: NJeff Kirsher <jeffrey.t.kirsher@intel.com>
-