提交 · c2409b004ac4757ac5121851f8a58e0bcbcf7a3c · openeuler / Kernel

30 4月, 2013 40 次提交

由 Richard Weinberger 提交于 4月 29, 2013

If the kernel was booted with the "quiet" boot option we have currently no
chance to see why an initrd fails.  Change KERN_WARNING to KERN_ERR to see
what is going on.
Signed-off-by: NRichard Weinberger <richard@nod.at>
Cc: "H. Peter Anvin" <hpa@zytor.com>
Cc: Rusty Russell <rusty@rustcorp.com.au>
Cc: Jim Cromie <jim.cromie@gmail.com>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

c2409b00

init: scream bloody murder if interrupts are enabled too early · f91eb62f

由 Steven Rostedt 提交于 4月 29, 2013

As I was testing a lot of my code recently, and having several
"successes", I accidentally noticed in the dmesg this little line:

  start_kernel(): bug: interrupts were enabled *very* early, fixing it

Sure enough, one of my patches two commits ago enabled interrupts early.
The sad part here is that I never noticed it, and I ran several tests with
ktest too, and ktest did not notice this line.

What ktest looks for (and so does many other automated testing scripts) is
a back trace produced by a WARN_ON() or BUG().  As a back trace was never
produced, my buggy patch could have slipped into linux-next, or even
worse, mainline.

Adding a WARN(!irqs_disabled()) makes this bug a little more obvious:

  PID hash table entries: 4096 (order: 3, 32768 bytes)
  __ex_table already sorted, skipping sort
  Checking aperture...
  No AGP bridge found
  Calgary: detecting Calgary via BIOS EBDA area
  Calgary: Unable to locate Rio Grande table in EBDA - bailing!
  Memory: 2003252k/2054848k available (4857k kernel code, 460k absent, 51136k reserved, 6210k data, 1096k init)
  ------------[ cut here ]------------
  WARNING: at /home/rostedt/work/git/linux-trace.git/init/main.c:543 start_kernel+0x21e/0x415()
  Hardware name: To Be Filled By O.E.M.
  Interrupts were enabled *very* early, fixing it
  Modules linked in:
  Pid: 0, comm: swapper/0 Not tainted 3.8.0-test+ #286
  Call Trace:
    warn_slowpath_common+0x83/0x9b
    warn_slowpath_fmt+0x46/0x48
    start_kernel+0x21e/0x415
    x86_64_start_reservations+0x10e/0x112
    x86_64_start_kernel+0x102/0x111
  ---[ end trace 007d8b0491b4f5d8 ]---
  Preemptible hierarchical RCU implementation.
   RCU restricting CPUs from NR_CPUS=8 to nr_cpu_ids=4.
  NR_IRQS:4352 nr_irqs:712 16
  Console: colour VGA+ 80x25
  console [ttyS0] enabled, bootconsole disabled

Do you see it?

The original version of this patch just slapped a WARN_ON() in there and
kept the printk().  Ard van Breemen suggested using the WARN() interface,
which makes the code a bit cleaner.

Also, while examining other warnings in init/main.c, I found two other
locations that deserve a bloody murder scream if their conditions are hit,
and updated them accordingly.
Signed-off-by: NSteven Rostedt <rostedt@goodmis.org>
Cc: Ard van Breemen <ard@telegraafnet.nl>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

f91eb62f

checkpatch: add Suggested-by as a standard signature · 8543ae12

由 Mugunthan V N 提交于 4月 29, 2013

As people started using Suggested-by as standard signature, adding
"Suggested-by" to the standard signature so that checkpatch won't
generate warning when Suggested-by is used in patch signature
Signed-off-by: NMugunthan V N <mugunthanvnm@ti.com>
Cc: Andy Whitcroft <apw@canonical.com>
Cc: Joe Perches <joe@perches.com>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

8543ae12

checkpatch: only warn for empty lines before closing braces by themselves · 74c8f433

由 Matthijs Kooijman 提交于 4月 29, 2013

This check was intended to catch extra newlines at the end of a function
definition, but it would trigger on any closing brace, including those
of inline functions and macro definitions, triggering false positives.
Now, only closing braces on a line by themselves trigger this check.

Tested with:

$ cat test.h
/* test.h - Test file */

static inline int foo(void) { return 0; }

static inline int bar(void)
{
        return 1;

}

$ ./scripts/checkpatch.pl --strict -f test.h # Before this commit
CHECK: Blank lines aren't necessary before a close brace '}'
+
+static inline int foo(void) { return 0; }

CHECK: Blank lines aren't necessary before a close brace '}'
+
+}

total: 0 errors, 0 warnings, 2 checks, 9 lines checked

$ ./scripts/checkpatch.pl --strict -f test.h # After this commit
CHECK: Blank lines aren't necessary before a close brace '}'
+
+}

total: 0 errors, 0 warnings, 1 checks, 9 lines checked
Signed-off-by: NMatthijs Kooijman <matthijs@stdin.nl>
Cc: Andy Whitcroft <apw@canonical.com>
Acked-by: NJoe Perches <joe@perches.com>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

74c8f433

checkpatch: warn on space before semicolon · 5646bc71

由 Joe Perches 提交于 4月 29, 2013

Make space before semicolon a warning instead of a --strict CHK test.
Signed-off-by: NJoe Perches <joe@perches.com>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

5646bc71

checkpatch: complain about executable files · 04db4d25

由 Joe Perches 提交于 4月 29, 2013

Complain about files with an executable bit set that are not in a scripts/
directory and are not type .pl, .py, .awk, or .sh

Based on an initial patch from Stephen.
Signed-off-by: NJoe Perches <joe@perches.com>
Acked-by: NStephen Boyd <sboyd@codeaurora.org>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

04db4d25

checkpatch: Prefer seq_puts to seq_printf · a6962d72

由 Joe Perches 提交于 4月 29, 2013

Add a check for seq_printf use with a constant format without additional
arguments.  Suggest seq_puts instead.
Signed-off-by: NJoe Perches <joe@perches.com>
Suggested-by: NBjorn Helgaas <bhelgaas@google.com>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

a6962d72

checkpatch: add check for reuse of krealloc arg · 972fdea2

由 Joe Perches 提交于 4月 29, 2013

On Thu, 2013-03-14 at 13:30 +0000, David Woodhouse wrote:
> If krealloc() returns NULL, it *doesn't* free the original. So any code
> of the form 'foo = krealloc(foo, …);' is almost certainly a bug.

So add a check for it to checkpatch.
Signed-off-by: NJoe Perches <joe@perches.com>
Tested-by: NGuenter Roeck <linux@roeck-us.net>
Acked-by: NGuenter Roeck <linux@roeck-us.net>
Cc: David Woodhouse <dwmw2@infradead.org>
Cc: Andy Whitcroft <apw@canonical.com>
Cc: Jean Delvare <khali@linux-fr.org>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

972fdea2

lib, net: make isodigit() public and use it · 2e0fb404

由 Andy Shevchenko 提交于 4月 29, 2013

There are at least two users of isodigit().  Let's make it a public
function of ctype.h.
Signed-off-by: NAndy Shevchenko <andriy.shevchenko@linux.intel.com>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

2e0fb404

argv_split(): teach it to handle mutable strings · 095d141b

由 Oleg Nesterov 提交于 4月 29, 2013

argv_split() allocates argv[count_argc(str)] array and assumes that it
will find the same number of arguments later.  This is obviously wrong if
this string can be changed, say, by sysctl.

With this patch argv_split() kstrndup's the whole string and does not
split it, we simply replace the spaces with zeroes and keep the allocated
memory in argv[-1] for argv_free(arg).

We do not use argv[0] because:

	- str can be all-spaces or empty. In fact this case is fine,
	  we could kfree() it before return, but:

	- str can have a space at the start, and we can not rely on
	  kstrndup(skip_spaces(str)) because it can equally race if
	  this string is mutable.

Also, simplify count_argc() and kill the no longer used skip_arg().
Signed-off-by: NOleg Nesterov <oleg@redhat.com>
Cc: Andi Kleen <andi@firstfloor.org>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

095d141b

lib/int_sqrt.c: optimize square root algorithm · 30493cc9

由 Davidlohr Bueso 提交于 4月 29, 2013

Optimize the current version of the shift-and-subtract (hardware)
algorithm, described by John von Newmann[1] and Guy L Steele.

Iterating 1,000,000 times, perf shows for the current version:

 Performance counter stats for './sqrt-curr' (10 runs):

         27.170996 task-clock                #    0.979 CPUs utilized            ( +-  3.19% )
                 3 context-switches          #    0.103 K/sec                    ( +-  4.76% )
                 0 cpu-migrations            #    0.004 K/sec                    ( +-100.00% )
               104 page-faults               #    0.004 M/sec                    ( +-  0.16% )
        64,921,199 cycles                    #    2.389 GHz                      ( +-  0.03% )
        28,967,789 stalled-cycles-frontend   #   44.62% frontend cycles idle     ( +-  0.18% )
   <not supported> stalled-cycles-backend
       104,502,623 instructions              #    1.61  insns per cycle
                                             #    0.28  stalled cycles per insn  ( +-  0.00% )
        34,088,368 branches                  # 1254.587 M/sec                    ( +-  0.00% )
             4,901 branch-misses             #    0.01% of all branches          ( +-  1.32% )

       0.027763015 seconds time elapsed                                          ( +-  3.22% )

And for the new version:

Performance counter stats for './sqrt-new' (10 runs):

          0.496869 task-clock                #    0.519 CPUs utilized            ( +-  2.38% )
                 0 context-switches          #    0.000 K/sec
                 0 cpu-migrations            #    0.403 K/sec                    ( +-100.00% )
               104 page-faults               #    0.209 M/sec                    ( +-  0.15% )
           590,760 cycles                    #    1.189 GHz                      ( +-  2.35% )
           395,053 stalled-cycles-frontend   #   66.87% frontend cycles idle     ( +-  3.67% )
   <not supported> stalled-cycles-backend
           398,963 instructions              #    0.68  insns per cycle
                                             #    0.99  stalled cycles per insn  ( +-  0.39% )
            70,228 branches                  #  141.341 M/sec                    ( +-  0.36% )
             3,364 branch-misses             #    4.79% of all branches          ( +-  5.45% )

       0.000957440 seconds time elapsed                                          ( +-  2.42% )

Furthermore, this saves space in instruction text:

   text    data     bss     dec     hex filename
    111       0       0     111      6f lib/int_sqrt-baseline.o
     89       0       0      89      59 lib/int_sqrt.o

[1] http://en.wikipedia.org/wiki/First_Draft_of_a_Report_on_the_EDVACSigned-off-by: NDavidlohr Bueso <davidlohr.bueso@hp.com>
Reviewed-by: NJonathan Gonzalez <jgonzlez@linets.cl>
Tested-by: NJonathan Gonzalez <jgonzlez@linets.cl>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

30493cc9

drivers/video/backlight/tps65217_bl.c add default brightness value option · 4d22f8c3

由 Matus Ujhelyi 提交于 4月 29, 2013

Signed-off-by: NMatus Ujhelyi <matus.ujhelyi@streamunlimited.com>
Cc: Grant Likely <grant.likely@secretlab.ca>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

4d22f8c3

Documentation: add missing documentation for tps65217-bl device tree binding · 17e45db6

由 Matus Ujhelyi 提交于 4月 29, 2013

Signed-off-by: NMatus Ujhelyi <matus.ujhelyi@streamunlimited.com>
Cc: Grant Likely <grant.likely@secretlab.ca>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

17e45db6

backlight: lp855x: add a device tree structure · 4add0664

由 Kim, Milo 提交于 4月 29, 2013

Enable supporting the DT structure of LP855x family devices. If the
platform data is NULL, the driver tries to parse a DT structure. Then,
the platform data is copied from the DT. Documentation is added as well.
Signed-off-by: NMilo(Woogyom) Kim <milo.kim@ti.com>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

4add0664

backlight: lp855x: remove duplicate platform data · c365e59d

由 Kim, Milo 提交于 4月 29, 2013

The 'load_new_rom_data' was used for checking whether new ROM data should
be updated or not.

However, we can decide it with 'size_program' data.  If the size is
greater than 0, it means updating ROM area is required.  Otherwise, the
default ROM data will be used.  Therefore, this duplicate platform data
can be removed.
Signed-off-by: NMilo(Woogyom) Kim <milo.kim@ti.com>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

c365e59d

backlight: lp855x: fix initial brightness type · 98e35be2

由 Kim, Milo 提交于 4月 29, 2013

Valid range of the brightness is from 0 to 255, so initial brightness
is changed from integer to u8.
Signed-off-by: NMilo(Woogyom) Kim <milo.kim@ti.com>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

98e35be2

backlight: lp855x: move backlight mode platform data · 0b818573

由 Kim, Milo 提交于 4月 29, 2013

The brightness of LP855x devices is controlled by I2C register or PWM
input .  This mode was selected through the platform data, but it can be
chosen by the driver internally without platform data configuration.

How to decide the control mode:
  If the PWM period has specific value, the mode is PWM input.
  On the other hand, the mode is register-based.
  This mode selection is done on the _probe().

Move 'mode' from a header file to the driver private data structure,
'lp855 x'.  And correlated code was replaced.
Signed-off-by: NMilo(Woogyom) Kim <milo.kim@ti.com>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

0b818573

backlight: lp855x: convert a type of device name · 600ffd33

由 Kim, Milo 提交于 4月 29, 2013

Configurable data, backlight device name is set to constant character type.
Signed-off-by: NMilo(Woogyom) Kim <milo.kim@ti.com>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

600ffd33

backlight: vgg2432a4: convert vgg2432a4_driver to dev_pm_ops · eb39ad25

由 Jingoo Han 提交于 4月 29, 2013

Instead of using legacy suspend/resume methods, using newer dev_pm_ops
structure allows better control over power management. Also, use of
pm_message_t is deprecated. Thus, it is removed.
Signed-off-by: NJingoo Han <jg1.han@samsung.com>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

eb39ad25

backlight: tosa: convert tosa to dev_pm_ops · 1dde37d4

由 Jingoo Han 提交于 4月 29, 2013

Instead of using legacy suspend/resume methods, using newer dev_pm_ops
structure allows better control over power management.
Signed-off-by: NJingoo Han <jg1.han@samsung.com>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

1dde37d4

backlight: omap1: convert omapbl to dev_pm_ops · 07cac9d7

由 Jingoo Han 提交于 4月 29, 2013

Instead of using legacy suspend/resume methods, using newer dev_pm_ops
structure allows better control over power management.
Signed-off-by: NJingoo Han <jg1.han@samsung.com>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

07cac9d7

drivers/video/backlight/platform_lcd.c: introduce probe callback · 46e1915e

由 Andrew Bresticker 提交于 4月 29, 2013

Platform LCD devices may need to do some device-specific initialization
before they can be used (regulator or GPIO setup, for example), but
currently the driver does not support any way of doing this.  This patch
adds a probe() callback to plat_lcd_data which platform LCD devices can
set to indicate that device-specific initialization is needed.
Signed-off-by: NAndrew Bresticker <abrestic@chromium.org>
Cc: Richard Purdie <rpurdie@rpsys.net>
Cc: Florian Tobias Schandinat <FlorianSchandinat@gmx.de>
Reviewed-by: NDoug Anderson <dianders@chromium.org>
Acked-by: NJingoo Han <jg1.han@samsung.com>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

46e1915e

backlight: ili922x: use spi_set_drvdata() · 40d88fc6

由 Jingoo Han 提交于 4月 29, 2013

Use the wrapper functions for getting and setting the driver data using
spi_device instead of using dev_{get|set}_drvdata with &spi->dev, so we
can directly pass a struct spi_device.
Signed-off-by: NJingoo Han <jg1.han@samsung.com>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

40d88fc6

backlight: ili9320: use spi_set_drvdata() · 5a24b010

由 Jingoo Han 提交于 4月 29, 2013

Use the wrapper functions for getting and setting the driver data using
spi_device instead of using dev_{get|set}_drvdata with &spi->dev, so we
can directly pass a struct spi_device.
Signed-off-by: NJingoo Han <jg1.han@samsung.com>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

5a24b010

drivers/video/backlight/as3711_bl.c: add OF support · 59eb2b5e

由 Guennadi Liakhovetski 提交于 4月 29, 2013

Add support for configuring AS3711 backlight driver from DT.
Signed-off-by: NGuennadi Liakhovetski <g.liakhovetski+renesas@gmail.com>
Reviewed-by: NMark Brown <broonie@opensource.wolfsonmicro.com>
Cc: Magnus Damm <magnus.damm@gmail.com>
Cc: Simon Horman <horms@verge.net.au>
Cc: Samuel Ortiz <sameo@linux.intel.com>
Acked-by: NJingoo Han <jg1.han@samsung.com>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

59eb2b5e

drivers/video/backlight/adp8870_bl.c: fix error return code in adp8870_led_probe() · 514f920a

由 Wei Yongjun 提交于 4月 29, 2013

Fix to return a negative error code from the error handling case instead
of zero, as returned elsewhere in this function.
Signed-off-by: NWei Yongjun <yongjun_wei@trendmicro.com.cn>
Acked-by: NJingoo Han <jg1.han@samsung.com>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

514f920a

drivers/video/backlight/adp8860_bl.c: fix error return code in adp8860_led_probe() · 84eba9ed

由 Wei Yongjun 提交于 4月 29, 2013

Fix to return a negative error code from the error handling case instead
of zero, as returned elsewhere in this function.
Signed-off-by: NWei Yongjun <yongjun_wei@trendmicro.com.cn>
Acked-by: NJingoo Han <jg1.han@samsung.com>
Acked-by: NMichael Hennerich <michael.hennerich@analog.com>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

84eba9ed

drivers/video/backlight/lp855x_bl.c: use PAGE_SIZE for the sysfs read operation · 6a7aeb1a

由 Kim, Milo 提交于 4月 29, 2013

sysfs allocates PAGE_SIZE.  It is used by each R/W operation method.  Use
it instead of another buffer size.
Signed-off-by: NMilo(Woogyom) Kim <milo.kim@ti.com>
Acked-by: NJingoo Han <jg1.han@samsung.com>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

6a7aeb1a

backlight: da903x_bl: use BL_CORE_SUSPENDRESUME option · d1720b57

由 Jingoo Han 提交于 4月 29, 2013

Use BL_CORE_SUSPENDRESUME option to support suspend/resume.  It reduces
code size.
Signed-off-by: NJingoo Han <jg1.han@samsung.com>
Cc: Lars-Peter Clausen <lars@metafoo.de>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

d1720b57

video: backlight: add ili922x lcd driver · 4cfbfa97

由 Stefano Babic 提交于 4月 29, 2013

Add LCD driver for Ilitek ILI9221/ILI9222 controller.  The driver uses
SPI interface for controller access and configuration and RGB interface
for graphics data transfer.
Signed-off-by: NStefano Babic <sbabic@denx.de>
Signed-off-by: NAnatolij Gustschin <agust@denx.de>
Cc: Richard Purdie <rpurdie@rpsys.net>
Cc: Florian Tobias Schandinat <FlorianSchandinat@gmx.de>
Cc: Jingoo Han <jg1.han@samsung.com>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

4cfbfa97

drivers/video/backlight/adp5520_bl.c: fix compiler warning in adp5520_show() · 359177e0

由 Devendra Naga 提交于 4月 29, 2013

While compiling with make W=1 (gcc gcc (GCC) 4.7.2 20121109 (Red Hat
4.7.2-8)) the following warning happens:

  drivers/video/backlight/adp5520_bl.c: In function `adp5520_show':
  drivers/video/backlight/adp5520_bl.c:146:6: warning: variable `error' set but not used [-Wunused-but-set-variable]

fixed by checking the return value of the variable
Signed-off-by: NDevendra Naga <devendra.aaru@gmail.com>
Acked-by: NJingoo Han <jg1.han@samsung.com>
Cc: Michael Hennerich <michael.hennerich@analog.com>
Cc: Richard Purdie <rpurdie@rpsys.net>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

359177e0

drivers/video/backlight/Kconfig: fix typo "MACH_SAM9...EK" three times · d50d1ddb

由 Paul Bolle 提交于 4月 29, 2013

Fix three typos (originally) introduced by commit a9a84c37
("atmel_lcdfb: backlight control").

Two of these typos were introduced in v2.6.25.  (The third was
introduced in 915190f7 ("[ARM] 5614/1: at91: atmel_lcdfb: add
at91sam9g10 support to atmel LCD driver")).  Checking these commits
reveals that the default value of 'y' has never been set automatically
in all releases since v2.6.25! Perhaps this line might as well be
dropped.
Signed-off-by: NPaul Bolle <pebolle@tiscali.nl>
Cc: Florian Tobias Schandinat <FlorianSchandinat@gmx.de>
Acked-by: NJingoo Han <jg1.han@samsung.com>
Cc: Nicolas Ferre <nicolas.ferre@atmel.com>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

d50d1ddb

backlight: tdo24m: convert tdo24m to dev_pm_ops · 3e14e689

由 Jingoo Han 提交于 4月 29, 2013

Instead of using legacy suspend/resume methods, using newer dev_pm_ops
structure allows better control over power management.
Signed-off-by: NJingoo Han <jg1.han@samsung.com>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

3e14e689

backlight: ltv350qv: convert ltv350qv to dev_pm_ops · a71ed77b

由 Jingoo Han 提交于 4月 29, 2013

Instead of using legacy suspend/resume methods, using newer dev_pm_ops
structure allows better control over power management.
Signed-off-by: NJingoo Han <jg1.han@samsung.com>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

a71ed77b

backlight: locomolcd: convert locomolcd to dev_pm_ops · 5a3778e2

由 Jingoo Han 提交于 4月 29, 2013

Instead of using legacy suspend/resume methods, using newer dev_pm_ops
structure allows better control over power management.
Signed-off-by: NJingoo Han <jg1.han@samsung.com>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

5a3778e2

backlight: lm3533_bl: convert lm3533_bl to dev_pm_ops · b0792962

由 Jingoo Han 提交于 4月 29, 2013

Instead of using legacy suspend/resume methods, using newer dev_pm_ops
structure allows better control over power management.
Signed-off-by: NJingoo Han <jg1.han@samsung.com>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

b0792962

backlight: kb3886_bl: convert kb3886bl to dev_pm_ops · f10a46cf

由 Jingoo Han 提交于 4月 29, 2013

Instead of using legacy suspend/resume methods, using newer dev_pm_ops
structure allows better control over power management.
Signed-off-by: NJingoo Han <jg1.han@samsung.com>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

f10a46cf

backlight: hp680_bl: convert hp680bl to dev_pm_ops · b55bb78d

由 Jingoo Han 提交于 4月 29, 2013

Instead of using legacy suspend/resume methods, using newer dev_pm_ops
structure allows better control over power management.
Signed-off-by: NJingoo Han <jg1.han@samsung.com>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

b55bb78d

backlight: ep93xx: convert ep93xx to dev_pm_ops · d7696aad

由 Jingoo Han 提交于 4月 29, 2013

Instead of using legacy suspend/resume methods, using newer dev_pm_ops
structure allows better control over power management.
Signed-off-by: NJingoo Han <jg1.han@samsung.com>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

d7696aad

backlight: corgi_lcd: convert corgi_lcd to dev_pm_ops · bb074710

由 Jingoo Han 提交于 4月 29, 2013

Instead of using legacy suspend/resume methods, using newer dev_pm_ops
structure allows better control over power management.
Signed-off-by: NJingoo Han <jg1.han@samsung.com>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

bb074710

openeuler / Kernel 1 年多 前同步成功

openeuler / Kernel
1 年多前同步成功