Generated using semantic patches:

@@
expression E;
@@

- drm_get_connector_name(&E)
+ E.name

@@
expression E;
@@

- drm_get_connector_name(E)
+ E->name

v2: Turn drm_get_connector_name(&E) into E.name instead of &(E)->name.
Acked-by: NDavid Herrmann <dh.herrmann@gmail.com>
Signed-off-by: NJani Nikula <jani.nikula@intel.com>
Signed-off-by: NDave Airlie <airlied@redhat.com>

We only set a few bits in the ADPA register, which we then read back
in the enable/disable hooks. So we can just move that bit of state
computation code to the place where we need it since setting these
bits without enabling the CRT encoder has no effects.

The only exceptions are the hotplug bits since they affect the hotplug
detection logic, but we already set those in the ->reset function and
then never touch them.
Reviewed-by: NImre Deak <imre.deak@intel.com>
Signed-off-by: NDaniel Vetter <daniel.vetter@ffwll.ch>

The Dell XPS 8700 has a onboard Display port and HDMI port and no VGA port.
The call intel_crt_init freeze the machine, so skip such call.

Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=73559
Signed-off-by: Giacomo Comes <comes at naic.edu>
Cc: stable@vger.kernel.org
Signed-off-by: NDaniel Vetter <daniel.vetter@ffwll.ch>

HDMI+VGA cloning should be supported on all platforms. The only real
obstacle is the 1.5x clock adjustment for 12bpc HDMI, but that is now
taken care of, so we can allow HDMI+VGA cloning.

Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=73850Signed-off-by: NVille Syrjälä <ville.syrjala@linux.intel.com>
Reviewed-by: NRodrigo Vivi <rodrigo.vivi@gmail.com>
Signed-off-by: NDaniel Vetter <daniel.vetter@ffwll.ch>

Currently we allow encoders to indicate whether they can be part of a
cloned set with just one flag. That's not flexible enough to describe
the actual hardware capabilities. Instead make it a bitmask of encoder
types with which the current encoder can be cloned.

For now we set the bitmask to allow DVO+DVO and DVO+VGA, which should
match what the old boolean flag allowed. We will add some more cloning
options in the future.

Note that this patch also removes the encoder.possible_clones setting
from encoder setup code - we compute this dynamically.
Signed-off-by: NVille Syrjälä <ville.syrjala@linux.intel.com>
Reviewed-by: NRodrigo Vivi <rodrigo.vivi@gmail.com>
[danvet: Add Ville's explanation why removing the encoder
possible_clones is save.]
Signed-off-by: NDaniel Vetter <daniel.vetter@ffwll.ch>

Since the encoder is tied to its port, we need to make sure the power
domain for that port is on before reading out the encoder HW state.

Note that this also covers also all connector get_hw_state handlers,
since all those just call the corresponding encoder get_hw_state
handler, which checks - after this change - for all power domains
the connector needs.

v2:
- no change
v3:
- push down the power domain checks into the specific encoder
  get_hw_state handlers (Daniel)
Signed-off-by: NImre Deak <imre.deak@intel.com>
Reviewed-by: NJesse Barnes <jbarnes@virtuousgeek.org>
Signed-off-by: NDaniel Vetter <daniel.vetter@ffwll.ch>

The connector detect and get_mode handlers need to access the port
specific HW blocks to read the EDID etc. Get/put the port power domains
around these handlers.

v2:
- get port power domain for HDMI too (Ville)
- get port power domain for the DP,HDMI audio detect handlers (Jesse)
- Leave the intel_runtime_pm_get/put in the DP detect function in place.
  Instead of just removing them, these should be moved to the appropriate
  power_well enable/disable handlers. We can do this after Paulo's
  'Merge PC8 with runtime PM, v2' patchset.
v3:
- rebased on latest -nightly
Signed-off-by: NImre Deak <imre.deak@intel.com>
Reviewed-by: NJesse Barnes <jbarnes@virtuousgeek.org>
Signed-off-by: NDaniel Vetter <daniel.vetter@ffwll.ch>

On DDI there's no PLL as such to generate the pixel clock for VGA.
Instead we derive the pixel clock from the FDI link frequency. So
to make .compute_config match what .get_config does, we need to
set the port_clock based on the FDI link frequency.

Note that we don't even check the port_clock when selecting the
PLL for VGA output. We just assume SPLL at 1.35GHz is what we want,
and that does match with the asumption of FDI frequency of 2.7Ghz
we have in intel_fdi_link_freq().

Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=74955Signed-off-by: NVille Syrjälä <ville.syrjala@linux.intel.com>
Reviewed-by: NPaulo Zanoni <paulo.r.zanoni@intel.com>
Signed-off-by: NDaniel Vetter <daniel.vetter@ffwll.ch>

Otherwise we'll read registers that return 0xffffffff, trigger some
WARNs, think CRT is actually connected (because certain bits are 1),
and fail the drm-resources-equal testcase!

Tested on a SNB machine with runtime PM support (which is not upstream
yet, but is already on my public tree at freedesktop.org, and will
hopefully eventually become upstream).

Testcase: igt/pm_pc8/drm-resources-equal
Signed-off-by: NPaulo Zanoni <paulo.r.zanoni@intel.com>
Reviewed-by: NJesse Barnes <jbarnes@virtuousgeek.org>
Signed-off-by: NDaniel Vetter <daniel.vetter@ffwll.ch>

Since

commit d9255d57
Author: Paulo Zanoni <paulo.r.zanoni@intel.com>
Date:   Thu Sep 26 20:05:59 2013 -0300

it became clear that we need to separate the unload sequence into two
parts:

1. remove all interfaces through which new operations on some object
   (crtc, encoder, connector) can be started and make sure all pending
   operations are completed
2. do the actual tear down of the internal representation of the above
   objects

The above commit achieved this separation for connectors by splitting
out the sysfs removal part from the connector's destroy callback and
doing this removal before calling drm_mode_config_cleanup() which does
the actual tear-down of all the drm objects.

Since we'll have to customize the interface removal part for different
types of connectors in the upcoming patches, add a new unregister
callback and move the interface removal part to it.

No functional change.
Signed-off-by: NImre Deak <imre.deak@intel.com>
Reviewed-by: NAntti Koskipää <antti.koskipaa@linux.intel.com>
Signed-off-by: NDaniel Vetter <daniel.vetter@ffwll.ch>

Currently we're doing the reset handling a bit late, and we're doing
it both in the driver load code and on resume. This makes it unusable
for e.g. resetting the panel power sequence state like Paulo wants to.

Instead of adding yet another single-use callback shuffle things
around:
- Output handling code is responsible to reset/init all state on its
  own at driver load time.
- We call the reset functions much earlier, before we start using any
  of the modeset code.

Compared to Paulo's new ->resume callback the only difference in
placement is that ->reset is still called without dev->struct_mutex
held. Which is imo a feature.

v2: Rebase on top of the now merge dinq.

Cc: Paulo Zanoni <przanoni@gmail.com>
Reviewed-by: NPaulo Zanoni <paulo.r.zanoni@intel.com>
Signed-off-by: NDaniel Vetter <daniel.vetter@ffwll.ch>

We had some mode_valid() vfuncs returning an int, others the enum. Let's
use the latter everywhere.
Signed-off-by: NDamien Lespiau <damien.lespiau@intel.com>
Signed-off-by: NDaniel Vetter <daniel.vetter@ffwll.ch>

Broadwell should also use hsw_crt_get_config(). Just move the
function pointer assignment to the if HAS_DDI block we already
have there.
Signed-off-by: NVille Syrjälä <ville.syrjala@linux.intel.com>
Signed-off-by: NDaniel Vetter <daniel.vetter@ffwll.ch>

The last i915 drm update brought with it this annoying warning

  drivers/gpu/drm/i915/intel_crt.c: In function ‘intel_crt_get_config’:
  drivers/gpu/drm/i915/intel_crt.c:110:21: warning: unused variable ‘dev’ [-Wunused-variable]
    struct drm_device *dev = encoder->base.dev;
                       ^

introduced by commit 7195a50b ("drm/i915: Add HSW CRT output readout
support").

Remove the offending pointless variable.
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

Call intel_ddi_get_config() to get the pipe_bpp settings from
DDI.

The sync polarity settings from DDI are irrelevant for CRT
output, so override them with data from the ADPA register.

Note: This is already merged in drm-intel-next-queued as

commit 6801c18c
Author: Ville Syrjälä <ville.syrjala@linux.intel.com>
Date:   Tue Sep 24 14:24:05 2013 +0300

    drm/i915: Add HSW CRT output readout support

but is required for the following edp bpp bugfix.

v2: Extract intel_crt_get_flags()

Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=69691Tested-by: NQingshuai Tian <qingshuai.tian@intel.com>
Signed-off-by: NVille Syrjälä <ville.syrjala@linux.intel.com>
Cc: stable@vger.kernel.org
Signed-off-by: NDaniel Vetter <daniel.vetter@ffwll.ch>

Since

commit 912d812e
Author: Daniel Vetter <daniel.vetter@ffwll.ch>
Date:   Thu Oct 11 20:08:23 2012 +0200

    drm/i915/crt: don't set HOTPLUG bits on !PCH

on VLV we don't detect any VGA unplug event after a modeset, since there we
reset the ADPA hotplug bits. Fix it by preserving the hotplug bits on VLV as
well.
Signed-off-by: NImre Deak <imre.deak@intel.com>
[danvet: For consistency use gen >= 5 like in Chris' exact same fix
in intel_crt_reset.]
Signed-off-by: NDaniel Vetter <daniel.vetter@ffwll.ch>

For some reason, every single time I try to run module_reload
something tries to read the connector sysfs files. This happens
after we destroy the encoders and before we destroy the connectors, so
when the sysfs read triggers the connector detect() function,
intel_conector->encoder points to memory that was already freed.

The bad backtrace is just:
    [<ffffffff8163ca9a>] dump_stack+0x54/0x74
    [<ffffffffa00c2c8e>] intel_dp_detect+0x1e/0x4b0 [i915]
    [<ffffffffa001913d>] status_show+0x3d/0x80 [drm]
    [<ffffffff813d5340>] dev_attr_show+0x20/0x60
    [<ffffffff81221f50>] ? sysfs_read_file+0x80/0x1b0
    [<ffffffff81221f79>] sysfs_read_file+0xa9/0x1b0
    [<ffffffff811aaf1e>] vfs_read+0x9e/0x170
    [<ffffffff811aba4c>] SyS_read+0x4c/0xa0
    [<ffffffff8164e392>] system_call_fastpath+0x16/0x1b

But if you add tons of memory checking debug options to your Kernel
you'll also see:
 - general protection fault: 0000
 - BUG kmalloc-4096 (Tainted: G      D W   ): Poison overwritten
 - INFO: Allocated in intel_ddi_init+0x65/0x270 [i915]
 - INFO: Freed in intel_dp_encoder_destroy+0x69/0xb0 [i915]
Among a bunch of other error messages.

So this commit just destroys the sysfs files before both the encoder
and connectors are freed.
Signed-off-by: NPaulo Zanoni <paulo.r.zanoni@intel.com>
Signed-off-by: NDaniel Vetter <daniel.vetter@ffwll.ch>

struct drm_mode_display now has a separate crtc_ version of the clock to
be used when we're talking about the timings given to the harwadre (was
far as the mode is concerned).

This commit is really the result of a git grep adjusted_mode.*clock and
replacing those by adjusted_mode.crtc_clock. No functional change.

v2: Rebased on drm-intel-queued-next
Reviewed-by: NVille Syrjälä <ville.syrjala@linux.intel.com>
Signed-off-by: NDamien Lespiau <damien.lespiau@intel.com>
Acked-by: NDave Airlie <airlied@gmail.com>
Signed-off-by: NDaniel Vetter <daniel.vetter@ffwll.ch>

Call intel_ddi_get_config() to get the pipe_bpp settings from
DDI.

The sync polarity settings from DDI are irrelevant for CRT
output, so override them with data from the ADPA register.

v2: Extract intel_crt_get_flags()

Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=69691Tested-by: NQingshuai Tian <qingshuai.tian@intel.com>
Signed-off-by: NVille Syrjälä <ville.syrjala@linux.intel.com>
Signed-off-by: NDaniel Vetter <daniel.vetter@ffwll.ch>

Done while reviewing all our allocations for fubar. Also a few errant
cases of lacking () for the sizeof operator - just a bit of OCD.

I've left out all the conversions that also should use kcalloc from
this patch  (it's only 2).
Reviewed-by: NJani Nikula <jani.nikula@intel.com>
Signed-off-by: NDaniel Vetter <daniel.vetter@ffwll.ch>

Now that adjusted_mode.clock no longer contains the pixel_multiplier, we
can kill the get_clock() callback and instead do the clock readout
in get_pipe_config().

Also i9xx_crtc_clock_get() can now extract the frequency of the PCH
DPLL, so use it to populate port_clock accurately for PCH encoders.
For DP in port A the encoder is still responsible for filling in
port_clock. The FDI adjusted_mode.clock extraction is kept in place
for some extra sanity checking, but we no longer need to pretend it's
also the port_clock.

In the encoder get_config() functions fill out adjusted_mode.clock
based on port_clock and other details such as the DP M/N values,
HDMI 12bpc and SDVO pixel_multiplier. For PCH encoders we will then
do an extra sanity check to make sure the dotclock we derived from
the FDI configuratiuon matches the one we derive from port_clock.

DVO doesn't exist on PCH platforms, so it doesn't need to anything
but assign adjusted_mode.clock=port_clock. And DDI is HSW only, so
none of the changes apply there.

v2: Use hdmi_reg color format to detect 12bpc HDMI case
v3: Set adjusted_mode.clock for LVDS too
v4: Rename ironlake_crtc_clock_get to ironlake_pch_clock_get,
    eliminate the useless link_freq variable.
Signed-off-by: NVille Syrjälä <ville.syrjala@linux.intel.com>
Reviewed-by: NJani Nikula <jani.nikula@intel.com>
Signed-off-by: NDaniel Vetter <daniel.vetter@ffwll.ch>

Fixed with

commit 10603caa
Author: Chris Wilson <chris@chris-wilson.co.uk>
Date:   Mon Aug 26 19:51:06 2013 -0300

    drm/i915: Apply the force-detect VGA w/a to Valleyview
Signed-off-by: NJesse Barnes <jbarnes@virtuosugeek.org>
Signed-off-by: NDaniel Vetter <daniel.vetter@ffwll.ch>

It appears that Valleyview shares its VGA encoder with more recent
siblings and requires the same forced detection cycle after a hardware
reset before we can rely on hotplugging.
Reported-and-tested-by: Nkobeqin <kobe.qin@intel.com>
Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=67733Tested-by: Nkobeqin <kobe.qin@intel.com>
Signed-off-by: NChris Wilson <chris@chris-wilson.co.uk>
[danvet: Check for gen >= 5 insted, acked by Chris.]
Signed-off-by: NDaniel Vetter <daniel.vetter@ffwll.ch>

Also drop the intel_ prefix from the local intel_crtc variable and
reorder the upcast macros a bit for more reuse.
Reviewed-by: NRodrigo Vivi <rodrigo.vivi@gmail.com>
Signed-off-by: NDaniel Vetter <daniel.vetter@ffwll.ch>

Try to decypher detection failures is a little tricker at the moment as
the only indicator of progress is when output_poll_execute() tells us
the result after the connector->detect() has run. This patch adds a
telltale to the start of each detect function so that we can track
progress and associate activity more clearly with each connector.
Signed-off-by: NChris Wilson <chris@chris-wilson.co.uk>
Signed-off-by: NDaniel Vetter <daniel.vetter@ffwll.ch>

In the cloned case, changing just one output but keeping the other, the
pipe state won't change and intel_crtc_update_dpms will be a nop, but we
still need to update the dpms state of the output being changed.

Only dvo, sdvo and crt are cloneable, so only those three have special
dpms functions.
Signed-off-by: NJani Nikula <jani.nikula@intel.com>
Signed-off-by: NDaniel Vetter <daniel.vetter@ffwll.ch>

We can use this for fetching encoder specific pipe_config state, like
mode flags, adjusted clock, etc.

Just used for mode flags atm, so we can check the pipe config state at
mode set time.

v2: get_config when checking hw state too
v3: fix DVO and LVDS mode flags (Ville)
    get SDVO DTD for flag fetch (Ville)
v4: use input timings (Ville)
    correct command used (Ville)
    remove gen4 check (Ville)
v5: get DDI flag config too
Signed-off-by: NJesse Barnes <jbarnes@virtuousgeek.org>
Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com> (v4)
Tested-by: Paulo Zanoni <przanoni@gmail.com> (the new hsw ddi stuff)
Signed-off-by: NDaniel Vetter <daniel.vetter@ffwll.ch>

drm_i915_private is getting bigger and bigger when adding new vbt stuff.
So, the better way of getting drm_i915_private organized is to create
a special structure for vbt stuff.

v2: Basically conflicts fixes
Reviewed-by: NJani Nikula <jani.nikula@intel.com>
Signed-off-by: NRodrigo Vivi <rodrigo.vivi@gmail.com>
Signed-off-by: NDaniel Vetter <daniel.vetter@ffwll.ch>

The LPT PCH only supports 8bpc, so we need to force the pipe bpp
to the right value.
Reviewed-by: NVille Syrjälä <ville.syrjala@linux.intel.com>
Signed-off-by: NDaniel Vetter <daniel.vetter@ffwll.ch>

When an encoder is shared on several connectors there is only
one hotplug line, thus this line needs to be shared among these
connectors.
If HPD detect only works reliably on a subset of those connectors,
we want to poll the others. Thus we need to make sure that storm
detection doesn't mess up the settings for those connectors.
Therefore we store the settings in the intel_connector struct and
restore them from there.
If nothing is set but the encoder has a hpd_pin set we assume this
connector is hotplug capable.
On init/reset we make sure the polled state of the connectors
is (re)set to the default value, the HPD interrupts are marked
enabled.
Signed-off-by: NEgbert Eich <eich@suse.de>
Reviewed-by: NJani Nikula <jani.nikula@intel.com>
Signed-off-by: NDaniel Vetter <daniel.vetter@ffwll.ch>

This is used way too often in the enable/disable paths. And will
be even more useful in the future.

Note that correct semantics of this change highly depend upon
correct updating of intel_crtc->config: Like with all other
modeset state, we need to call ->disable with the old config,
but ->mode_set and ->enable with the new config.

v2: Do not yet use the flag in the ->disable callbacks - atm we don't
yet have support for the information stored in the pipe_config in the
hw state readout code, so this will be wrong at boot-up/resume.

v3: Rebased on top of the hdmi/dp ddi encoder merging.

v4: Fixup stupid rebase error which lead to a NULL vfunc deref.

v5: On haswell the VGA port is on the PCH!

v6: s/IS_HASWELL/HAS_DDI/, spotted by Paulo Zanoni. Also add a missing
parameter name in a function declaration.

v7: Don't forget to git add ...
Reviewed-by: NJesse Barnes <jbarnes@virtuousgeek.org>
Signed-off-by: NDaniel Vetter <daniel.vetter@ffwll.ch>

Now since we have replaced the bits to show interest in hotplug IRQs
we can go and nuke the 'hotplug_supported_mask'.
Signed-off-by: NEgbert Eich <eich@suse.de>
Acked-by: NChris Wilson <chris@chris-wilson.co.uk>
Signed-off-by: NDaniel Vetter <daniel.vetter@ffwll.ch>

commit f40ebd6b
Author: Patrik Jakobsson <patrik.r.jakobsson@gmail.com>
Date:   Tue Mar 5 14:24:48 2013 +0100

    drm/i915: Turn off hsync and vsync on ADPA when disabling crt

properly disabled the hsync/vsync logic at disable time, but neglected
to re-enable them at enable time.

v2: In the enable hook, restore the connector's expected DPMS level
instead of forcing ON.  Do this by stashing a back pointer to the
connector in the crt (suggested by danvet) since otherwise it's awkward
to look up.
Signed-off-by: NAdam Jackson <ajax@redhat.com>
Cc: stable@vger.kernel.org
[danvet: Added more verbose commit citation and cc: stable tag. Also,
make it compile. Then self-lart and try to assign the right pointer.]
Signed-off-by: NDaniel Vetter <daniel.vetter@ffwll.ch>

To clean up hotplug support we add a new enum to intel_encoder:
enum hpd_pin. It allows the encoder to request a hpd line but leave
the details which IRQ is responsible on which chipset generation
to i915_irq.c.
This way requesting hotplug support will become really simple on
the encoder/connector level.
Signed-off-by: NEgbert Eich <eich@suse.de>
Acked-by: NChris Wilson <chris@chris-wilson.co.uk>
Reviewed-by: NJesse Barnes <jbarnes@virtuousgeek.org>
Signed-off-by: NDaniel Vetter <daniel.vetter@ffwll.ch>

According to PRM we need to disable hsync and vsync even though ADPA is
disabled. The previous code did infact do the opposite so we fix it.
Signed-off-by: NPatrik Jakobsson <patrik.r.jakobsson@gmail.com>
Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=56359Tested-by: Nmax <manikulin@gmail.com>
Cc: stable@vger.kernel.org
Signed-off-by: NDaniel Vetter <daniel.vetter@ffwll.ch>

The FDI link has supported link reversal to make the PCB layout
engineer's life easier for quite a while and we have always presered
this bit as we programmed FDI_RX_CTL with a read/modify/write sequence.

We're trying to take a bit more control over what the BIOS leaves in
various register and with the introduction of DDI, started to program
FDI_RX_CTL fully.

There's a fused bit to indicate DMI link reversal and FDI defaults to
mirroring that configuration. We have a bit to override that behaviour
that we need to preserve from the BIOS.
Signed-off-by: NDamien Lespiau <damien.lespiau@intel.com>
Reviewed-by: NRodrigo Vivi <rodrigo.vivi@gmail.com>
Reviewed-by: NPaulo Zanoni <paulo.r.zanoni@intel.com>
Cc: stable@vger.kernel.org
Signed-off-by: NDaniel Vetter <daniel.vetter@ffwll.ch>

Now that the driver is in control of whether it needs to disable
everything at take-over or not, we can rip this all out.
Signed-off-by: NDaniel Vetter <daniel.vetter@ffwll.ch>

Instead of using ADPA/VLV_ADPA/PCH_ADPA in various parts of
intel_crt code, just use adpa_reg which always contains the
correct value for the platform.
Signed-off-by: NVille Syrjälä <ville.syrjala@linux.intel.com>
Signed-off-by: NDaniel Vetter <daniel.vetter@ffwll.ch>

If we fail to set the bit when needed we get some nice FDI link
training failures (AKA "black screen on VGA output").

While we don't really know how to properly choose whether we need to
set the bit or not (VBT?), just read the initial value set by the BIOS
and store it for later usage.
Signed-off-by: NPaulo Zanoni <paulo.r.zanoni@intel.com>
Signed-off-by: NDaniel Vetter <daniel.vetter@ffwll.ch>

More specifically, the LPT FDI RX only supports 8bpc and a maximum of
2 lanes, so anything above that won't work and should be rejected.
Signed-off-by: NPaulo Zanoni <paulo.r.zanoni@intel.com>
Signed-off-by: NDaniel Vetter <daniel.vetter@ffwll.ch>