Convert all Qu/Hr1 devices to the new device tables, by modifying the
corresponding structures, adding a new name and generalizing the
device recognition.
Signed-off-by: NLuca Coelho <luciano.coelho@intel.com>
Link: https://lore.kernel.org/r/iwlwifi.20200424194456.ec0e04102d2c.Ia36f2c7bbf06cb6436424d40d6adb2376f2962ee@changeid

We don't use the number 22000 for our devices anymore, so remove all
occurrences of it in the FW name macros.

While at it, add IWL_QU_B_HR_B to the list of firmwares used by the
driver, which was missing.
Signed-off-by: NLuca Coelho <luciano.coelho@intel.com>
Link: https://lore.kernel.org/r/iwlwifi.20200424194456.93cc41bdbb4d.Ib7599901888a2d050f851bd878a875f593f2e8e5@changeid

Convert all the occurrences of QnJ with Hr into a single entry in the
PCI device table.
Signed-off-by: NLuca Coelho <luciano.coelho@intel.com>
Link: https://lore.kernel.org/r/iwlwifi.20200424194456.21283ca79d82.I57a493c679a56fff11417afdaec76617711ff6a9@changeid

Start supporting API version 55 for AX devices.  We skipped 54 because
it won't be published.
Signed-off-by: NLuca Coelho <luciano.coelho@intel.com>
Link: https://lore.kernel.org/r/iwlwifi.20200424182644.5b4628e18203.I626d3b19d84214a83cd92dc4ddf291903b0983aa@changeid

Some So devices have a longer wake latency.  To support this properly,
add new cfg structs for them so the driver will inform the FW about
the need to use another xtal and use a higher wait value during state
transitions.
Signed-off-by: NLuca Coelho <luciano.coelho@intel.com>
Link: https://lore.kernel.org/r/iwlwifi.20200418110539.daf515618f57.I80e60006b108e1586e3c56669635c670597fe08d@changeid

Some Qu devices require an intermediate amount of time to wake up and
for LTR notifications, so add a new structure with the correct values
for them and change the corresponding devices to use it.
Signed-off-by: NLuca Coelho <luciano.coelho@intel.com>
Link: https://lore.kernel.org/r/iwlwifi.20200418110539.d6df2bcee78f.Ie008b0c8f03340a466c1ef981bfd25359c9de90d@changeid

Some (integrated) devices need a longer LTR delay than the firmware
would typically apply, tell it about that.
Signed-off-by: NJohannes Berg <johannes.berg@intel.com>
Signed-off-by: NLuca Coelho <luciano.coelho@intel.com>
Link: https://lore.kernel.org/r/iwlwifi.20200418110539.24276ae2ad61.I8831a538f75893d5cee47b4a81f4b9b7fd0e8bea@changeid

update the product names of few structs in AX family.
Signed-off-by: NIhab Zhaika <ihab.zhaika@intel.com>
Signed-off-by: NLuca Coelho <luciano.coelho@intel.com>
Link: https://lore.kernel.org/r/iwlwifi.20200418110539.738dabad8732.I5673eaf8a016b8aa27ab8bab02121108fa723783@changeid

add few PCI ID'S for AX family.
Signed-off-by: NIhab Zhaika <ihab.zhaika@intel.com>
Signed-off-by: NLuca Coelho <luciano.coelho@intel.com>
Link: https://lore.kernel.org/r/iwlwifi.20200418110539.5eae2261b70c.I0369619a562c4e4008e2f0a3afb9ed5d4c9b49d4@changeid

Start supporting API version 53 for 22000 series.

Change-Id: I5725e46394f3f53c3069723fd513cc53c7df383d
Signed-off-by: NLuca Coelho <luciano.coelho@intel.com>

We don't support the FPGA versions of this card combination anymore.
Remove the cfg mangling that tries to load it and all the relevant
structures.

Change-Id: I190652101afcab682cfba873d062992f11efca32
Signed-off-by: NLuca Coelho <luciano.coelho@intel.com>

We don't support QnJ HR STEP A anymore.  Remove the structures we used
for it.

Change-Id: I0dfd88232bdc8ff2dd9c4368b8ed9a0c40c86bc8
Signed-off-by: NLuca Coelho <luciano.coelho@intel.com>

A couple of SoCs, which can be recognized by PCI device IDs 0xA0F0 and
0x43F0, need a longer wait for the xtal to stabilize.  To handle this,
add a new trans_cfg structure for Qu devices with a larger
xtal_latency value and apply them to the devices recognized by these
IDs.  Also add a flag that allows us to inform the FW that the low
latency xtal should be used.

Change-Id: I8a14c6af45ea14d8e7f1ef38a589158f38d0c0ea
Signed-off-by: NLuca Coelho <luciano.coelho@intel.com>

Now that we identify the correct cfgs with the new tables for Qu step
C and QuZ with Jf, we can remove the mangling we do later on.

Change-Id: Ic01ce67db147e897ad2424f0e05a70a00d2c620e
Signed-off-by: NLuca Coelho <luciano.coelho@intel.com>

All the QnJ devices have a similar matching to the other Qu devices,
but needs a different configuration.  Convert the QnJ devices to the
new table accordingly.

Change-Id: If236ef3d0da3e605a3379922818f5897e0affd7e
Signed-off-by: NLuca Coelho <luciano.coelho@intel.com>

Add new generic iwl_trans structures for these devices and apply the
correct cfg depending on the device characteristics.

Since we have to match Qu with IWL_CONFIG_ANY, we also need to move
the Hr devices to the new table, but for now we keep matching on PCI
device and subsystem device IDs.

Change-Id: I14e9146a99621ff11ce50bc746a4b88af508fee0
Signed-off-by: NLuca Coelho <luciano.coelho@intel.com>

These values are selected based on the PCI device ID, so the decision
to use them can be made early.  By moving them to the trans_cfg, we
avoid duplicating the large cfg structs for small pieces of
data (sometimes a single boolean).  This will also allow us to make
more decisions based on, for instance, the SoC type in used.

The trans_cfg concept changes a bit, because previously it was used
only to boot the device before reading further characteristics and now
it also contains more data that is associated with the device ID.

Change-Id: Ib71b07ea9e322eb74571dc5e8aa58f17eece5c9c
Signed-off-by: NLuca Coelho <luciano.coelho@intel.com>

Move the AX200 devices to the new table and add the appropriate cfg
struct and strings.
Signed-off-by: NLuca Coelho <luciano.coelho@intel.com>
Link: https://lore.kernel.org/r/iwlwifi.20200309091348.fdfa5f31b8b1.Idfd28829d9f3820de06d3bba8fa66048b8d0d0b0@changeid

We were erroneously only setting the tx_with_siso_diversity flag in
the Qu B-step configurations for AX101 devices, though we should do
it on all configurations.  Add the flag to the other two
configurations, namely Qu C-step and QuZ.
Signed-off-by: NLuca Coelho <luciano.coelho@intel.com>
Link: https://lore.kernel.org/r/iwlwifi.20200306151129.1cd986ef467c.Idc0b111475ae3d38b68ae062613c080b574e33e1@changeid

Add new struct for SoSnj and add uhb support for ax411 structs.
Signed-off-by: NOren Givon <oren.givon@intel.com>
Signed-off-by: NLuca Coelho <luciano.coelho@intel.com>

We needed this abstraction for some CSR registers for
IWL_DEVICE_22560, but that has been removed, so we don't need the
abstraction anymore.  Remove it.
Signed-off-by: NLuca Coelho <luciano.coelho@intel.com>

A few configuration structures were either not referenced anymore or
assigned to devices IDs that were not in use anymore.  Remove them.
Signed-off-by: NLuca Coelho <luciano.coelho@intel.com>

For HE-capable devices, we need to allocate more receive buffers as
there could be 256 frames aggregated into a single A-MPDU, and then
they might contain A-MSDUs as well. Until 22000 family, the devices
are able to put multiple frames into a single RB and the default RB
size is 4k, but starting from AX210 family this is no longer true.
On the other hand, those newer devices only use 2k receive buffers
(by default).

Modify the code and configuration to allocate an appropriate number
of RBs depending on the device capabilities:

 * 4096 for AX210 HE devices, which use 2k buffers by default,
 * 2048 for 22000 family devices which use 4k buffers by default,
 * 512 for existing 9000 family devices, which doesn't really
   change anything since that's the default before this patch,
 * 512 also for AX210/22000 family devices that don't do HE.

Theoretically, for devices lower than AX210, we wouldn't have to
allocate that many RBs if the RB size was manually increased, but
to support that the code got more complex, and it didn't really
seem necessary as that's a use case for monitor mode only, where
hopefully the wasted memory isn't really much of a concern.

Note that AX210 devices actually support bigger than 12-bit VID,
which is required here as we want to allocate 4096 buffers plus
some for quick recycling, so adjust the code for that as well.
Signed-off-by: NJohannes Berg <johannes.berg@intel.com>
Signed-off-by: NLuca Coelho <luciano.coelho@intel.com>

Start supporting API version 52 for 22000 series.
Signed-off-by: NLuca Coelho <luciano.coelho@intel.com>

Somehow two tabs snuck into this file where just one should be
used, fix that.
Signed-off-by: NJohannes Berg <johannes.berg@intel.com>
Signed-off-by: NLuca Coelho <luciano.coelho@intel.com>
Signed-off-by: NKalle Valo <kvalo@codeaurora.org>

This is dead code, nothing uses the IWL_DEVICE_22560 macro and
thus nothing every uses IWL_DEVICE_FAMILY_22560. Remove it all.

While at it, remove some code and definitions used only in this
case, and clean up some comments/names that still refer to it.
Signed-off-by: NJohannes Berg <johannes.berg@intel.com>
Signed-off-by: NLuca Coelho <luciano.coelho@intel.com>
Signed-off-by: NKalle Valo <kvalo@codeaurora.org>

Start supporting API version 51 for 22000 series.
Signed-off-by: NLuca Coelho <luciano.coelho@intel.com>
Signed-off-by: NKalle Valo <kvalo@codeaurora.org>

Allow collecting monitor data in ini debug mode.
Implement both SMEM and DRAM monitor regions dumping.
For DRAM monitor, support DBGC1, DBGC2 and DBGC3 and support several
DRAM fragments per DBGC.
Signed-off-by: NShahar S Matityahu <shahar.s.matityahu@intel.com>
Signed-off-by: NLuca Coelho <luciano.coelho@intel.com>

There are products which have a single chain with 2 antennas.
In these products, we need to inform the FW that the device has the
single antenna diversity(SAD) feature. In the future, we will read
the active antenna from a BIOS configuration. Currently, we use a
default configuration which means that the FW decides which antenna to use.
Signed-off-by: NHaim Dreyfuss <haim.dreyfuss@intel.com>
Signed-off-by: NLuca Coelho <luciano.coelho@intel.com>

In order to be able to select the cfg depending on the HW revision or
on the RF ID, we need to set up the trans before selecting the cfg.
To do so, move the elements from cfg that are needed by
iwl_trans_alloc() to a separate struct at the top of the cfg, so it
can be used by other cfg types as well, before selecting the rest of
the configuration.
Signed-off-by: NLuca Coelho <luciano.coelho@intel.com>

Remove the IWL_DEVICE_AX200_COMMON definition, since it's only used
once and relies mostly on IWL_DEVICE_22000_COMMON anyway.
Signed-off-by: NLuca Coelho <luciano.coelho@intel.com>

The string we define as IWL_22000_HR_B_F0_FW_PRE is duplicate with
IWL_22000_QU_B_HR_B_FW_PRE.  Remove the former to avoid confusion.
Signed-off-by: NLuca Coelho <luciano.coelho@intel.com>

Start supporting API version 50 for 22000 series.
Signed-off-by: NLuca Coelho <luciano.coelho@intel.com>

Start supporting API version 49 for 22000 series.
Signed-off-by: NLuca Coelho <luciano.coelho@intel.com>

We need to use a different firmware for C0 versions of killer Qu NICs.
Add structures for them and handle them in the if block that detects
C0 revisions.

Additionally, instead of having an inclusive check for QnJ devices,
make the selection exclusive, so that switching to QnJ is the
exception, not the default.  This prevents us from having to add all
the non-QnJ cards to an exclusion list.  To do so, only go into the
QnJ block if the device has an RF ID type HR and HW revision QnJ.

Cc: stable@vger.kernel.org # 5.2
Signed-off-by: NLuca Coelho <luciano.coelho@intel.com>
Link: https://lore.kernel.org/r/20190821171732.2266-1-luca@coelho.fiSigned-off-by: NJohannes Berg <johannes.berg@intel.com>

Add support for C-step devices.  Currently we don't have a nice way of
matching the step and choosing the proper configuration, so we need to
switch the config structs one by one.

Cc: stable@vger.kernel.org
Signed-off-by: NLuca Coelho <luciano.coelho@intel.com>
Signed-off-by: NKalle Valo <kvalo@codeaurora.org>

change the fw of 0x02F0 platform from qu to quz
Signed-off-by: NIhab Zhaika <ihab.zhaika@intel.com>
Signed-off-by: NLuca Coelho <luciano.coelho@intel.com>
Signed-off-by: NKalle Valo <kvalo@codeaurora.org>

add few PCI ID'S for 22000 and chainge few cards structs names
Signed-off-by: NIhab Zhaika <ihab.zhaika@intel.com>
Signed-off-by: NLuca Coelho <luciano.coelho@intel.com>
Signed-off-by: NKalle Valo <kvalo@codeaurora.org>

add few PCI ID'S for 22000 and fix the wrong name for one
of the structs
Signed-off-by: NIhab Zhaika <ihab.zhaika@intel.com>
Signed-off-by: NLuca Coelho <luciano.coelho@intel.com>
Signed-off-by: NKalle Valo <kvalo@codeaurora.org>

Start supporting API version 48 for 22000 series.
Signed-off-by: NLuca Coelho <luciano.coelho@intel.com>