Fixes the following W=1 kernel build warning(s):

 drivers/crypto/nx/nx-aes-gcm.c:26: warning: Function parameter or member 'tfm' not described in 'gcm_aes_nx_set_key'
 drivers/crypto/nx/nx-aes-gcm.c:26: warning: Function parameter or member 'in_key' not described in 'gcm_aes_nx_set_key'
 drivers/crypto/nx/nx-aes-gcm.c:26: warning: Function parameter or member 'key_len' not described in 'gcm_aes_nx_set_key'
 drivers/crypto/nx/nx-aes-gcm.c:26: warning: expecting prototype for Nest Accelerators driver(). Prototype was for gcm_aes_nx_set_key() instead
 drivers/crypto/nx/nx-aes-ecb.c:24: warning: Function parameter or member 'tfm' not described in 'ecb_aes_nx_set_key'
 drivers/crypto/nx/nx-aes-ecb.c:24: warning: Function parameter or member 'in_key' not described in 'ecb_aes_nx_set_key'
 drivers/crypto/nx/nx-aes-ecb.c:24: warning: Function parameter or member 'key_len' not described in 'ecb_aes_nx_set_key'
 drivers/crypto/nx/nx-aes-ecb.c:24: warning: expecting prototype for Nest Accelerators driver(). Prototype was for ecb_aes_nx_set_key() instead
 drivers/crypto/nx/nx-aes-ccm.c:26: warning: Function parameter or member 'tfm' not described in 'ccm_aes_nx_set_key'
 drivers/crypto/nx/nx-aes-ccm.c:26: warning: Function parameter or member 'in_key' not described in 'ccm_aes_nx_set_key'
 drivers/crypto/nx/nx-aes-ccm.c:26: warning: Function parameter or member 'key_len' not described in 'ccm_aes_nx_set_key'
 drivers/crypto/nx/nx-aes-ccm.c:26: warning: expecting prototype for Nest Accelerators driver(). Prototype was for ccm_aes_nx_set_key() instead
 drivers/crypto/nx/nx-aes-ctr.c:25: warning: Function parameter or member 'tfm' not described in 'ctr_aes_nx_set_key'
 drivers/crypto/nx/nx-aes-ctr.c:25: warning: Function parameter or member 'in_key' not described in 'ctr_aes_nx_set_key'
 drivers/crypto/nx/nx-aes-ctr.c:25: warning: Function parameter or member 'key_len' not described in 'ctr_aes_nx_set_key'
 drivers/crypto/nx/nx-aes-ctr.c:25: warning: expecting prototype for Nest Accelerators driver(). Prototype was for ctr_aes_nx_set_key() instead
 drivers/crypto/nx/nx-aes-xcbc.c:22: warning: cannot understand function prototype: 'struct xcbc_state '
 drivers/crypto/nx/nx-sha256.c:21: warning: Function parameter or member 'tfm' not described in 'nx_crypto_ctx_sha256_init'
 drivers/crypto/nx/nx-sha256.c:21: warning: expecting prototype for SHA(). Prototype was for nx_crypto_ctx_sha256_init() instead
 drivers/crypto/nx/nx-sha512.c:20: warning: Function parameter or member 'tfm' not described in 'nx_crypto_ctx_sha512_init'
 drivers/crypto/nx/nx-sha512.c:20: warning: expecting prototype for SHA(). Prototype was for nx_crypto_ctx_sha512_init() instead
 drivers/crypto/nx/nx-842-pseries.c:280: warning: Function parameter or member 'wmem' not described in 'nx842_pseries_compress'
 drivers/crypto/nx/nx-842-pseries.c:280: warning: Excess function parameter 'wrkmem' description in 'nx842_pseries_compress'
 drivers/crypto/nx/nx-842-pseries.c:410: warning: Function parameter or member 'wmem' not described in 'nx842_pseries_decompress'
 drivers/crypto/nx/nx-842-pseries.c:410: warning: Excess function parameter 'wrkmem' description in 'nx842_pseries_decompress'
 drivers/crypto/nx/nx-842-pseries.c:523: warning: Function parameter or member 'devdata' not described in 'nx842_OF_set_defaults'
 drivers/crypto/nx/nx-842-pseries.c:548: warning: Function parameter or member 'prop' not described in 'nx842_OF_upd_status'
 drivers/crypto/nx/nx-842-pseries.c:582: warning: Function parameter or member 'devdata' not described in 'nx842_OF_upd_maxsglen'
 drivers/crypto/nx/nx-842-pseries.c:582: warning: Function parameter or member 'prop' not described in 'nx842_OF_upd_maxsglen'
 drivers/crypto/nx/nx-842-pseries.c:630: warning: Function parameter or member 'devdata' not described in 'nx842_OF_upd_maxsyncop'
 drivers/crypto/nx/nx-842-pseries.c:630: warning: Function parameter or member 'prop' not described in 'nx842_OF_upd_maxsyncop'
 drivers/crypto/nx/nx-842-pseries.c:692: warning: Cannot understand  *
 drivers/crypto/nx/nx-842-pseries.c:825: warning: Function parameter or member 'data' not described in 'nx842_OF_notifier'
 drivers/crypto/nx/nx-842-pseries.c:825: warning: Excess function parameter 'update' description in 'nx842_OF_notifier'

Cc: Haren Myneni <haren@us.ibm.com>
Cc: Herbert Xu <herbert@gondor.apana.org.au>
Cc: "David S. Miller" <davem@davemloft.net>
Cc: Michael Ellerman <mpe@ellerman.id.au>
Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Robert Jennings <rcj@linux.vnet.ibm.com>
Cc: Seth Jennings <sjenning@linux.vnet.ibm.com>
Cc: linux-crypto@vger.kernel.org
Cc: linuxppc-dev@lists.ozlabs.org
Signed-off-by: NLee Jones <lee.jones@linaro.org>
Signed-off-by: NHerbert Xu <herbert@gondor.apana.org.au>

Fixes the following W=1 kernel build warning(s):

 drivers/crypto/cavium/nitrox/nitrox_main.c:41: warning: cannot understand function prototype: 'const struct pci_device_id nitrox_pci_tbl[] = '
 drivers/crypto/cavium/nitrox/nitrox_main.c:73: warning: Function parameter or member 'ndev' not described in 'write_to_ucd_unit'
 drivers/crypto/cavium/nitrox/nitrox_main.c:73: warning: Function parameter or member 'ucode_size' not described in 'write_to_ucd_unit'
 drivers/crypto/cavium/nitrox/nitrox_main.c:73: warning: Function parameter or member 'ucode_data' not described in 'write_to_ucd_unit'
 drivers/crypto/cavium/nitrox/nitrox_main.c:73: warning: Function parameter or member 'block_num' not described in 'write_to_ucd_unit'
 drivers/crypto/cavium/nitrox/nitrox_reqmgr.c:46: warning: Function parameter or member 'index' not described in 'incr_index'
 drivers/crypto/cavium/nitrox/nitrox_reqmgr.c:46: warning: Function parameter or member 'count' not described in 'incr_index'
 drivers/crypto/cavium/nitrox/nitrox_reqmgr.c:46: warning: Function parameter or member 'max' not described in 'incr_index'
 drivers/crypto/cavium/nitrox/nitrox_reqmgr.c:46: warning: expecting prototype for Response codes from SE microcode(). Prototype was for incr_index() instead
 drivers/crypto/cavium/nitrox/nitrox_reqmgr.c:287: warning: Function parameter or member 'cmdq' not described in 'post_se_instr'
 drivers/crypto/cavium/nitrox/nitrox_reqmgr.c:381: warning: Function parameter or member 'callback' not described in 'nitrox_process_se_request'
 drivers/crypto/cavium/nitrox/nitrox_reqmgr.c:381: warning: Function parameter or member 'cb_arg' not described in 'nitrox_process_se_request'
 drivers/crypto/cavium/nitrox/nitrox_reqmgr.c:381: warning: expecting prototype for nitrox_se_request(). Prototype was for nitrox_process_se_request() instead
 drivers/crypto/cavium/nitrox/nitrox_reqmgr.c:535: warning: Function parameter or member 'cmdq' not described in 'process_response_list'
 drivers/crypto/cavium/nitrox/nitrox_reqmgr.c:535: warning: expecting prototype for process_request_list(). Prototype was for process_response_list() instead
 drivers/crypto/cavium/nitrox/nitrox_reqmgr.c:584: warning: Function parameter or member 'data' not described in 'pkt_slc_resp_tasklet'
 drivers/crypto/cavium/nitrox/nitrox_mbx.c:14: warning: cannot understand function prototype: 'enum mbx_msg_type '
 drivers/crypto/cavium/nitrox/nitrox_mbx.c:24: warning: cannot understand function prototype: 'enum mbx_msg_opcode '
 drivers/crypto/cavium/nitrox/nitrox_skcipher.c:26: warning: cannot understand function prototype: 'const struct nitrox_cipher flexi_cipher_table[] = '
 drivers/crypto/cavium/cpt/cptpf_main.c:411: warning: Function parameter or member 'cpt' not described in 'cpt_unload_microcode'
 drivers/crypto/cavium/cpt/cptpf_main.c:411: warning: expecting prototype for Ensure all cores are disengaged from all groups by(). Prototype was for cpt_unload_microcode() instead
 drivers/crypto/cavium/cpt/cptvf_reqmanager.c:17: warning: Function parameter or member 'q' not described in 'get_free_pending_entry'
 drivers/crypto/cavium/cpt/cptvf_reqmanager.c:17: warning: Function parameter or member 'qlen' not described in 'get_free_pending_entry'

Cc: George Cherian <gcherian@marvell.com>
Cc: Herbert Xu <herbert@gondor.apana.org.au>
Cc: "David S. Miller" <davem@davemloft.net>
Cc: linux-crypto@vger.kernel.org
Signed-off-by: NLee Jones <lee.jones@linaro.org>
Signed-off-by: NHerbert Xu <herbert@gondor.apana.org.au>

'err' will be assigned later and cleanup the redundant initialization.

Cc: PrasannaKumar Muralidharan <prasannatsmkumar@gmail.com>
Cc: Herbert Xu <herbert@gondor.apana.org.au>
Signed-off-by: NShaokun Zhang <zhangshaokun@hisilicon.com>
Signed-off-by: NHerbert Xu <herbert@gondor.apana.org.au>

Fix to return negative error code from the error handling
cases instead of 0.

Fixes: 9363efb4 ("crypto: qce - Add support for AEAD algorithms")
Reported-by: NHulk Robot <hulkci@huawei.com>
Signed-off-by: NWei Yongjun <weiyongjun1@huawei.com>
Signed-off-by: NHerbert Xu <herbert@gondor.apana.org.au>

There are a few leading spaces before tabs and remove it by running the
following commard:

	$ find . -name '*.c' | xargs sed -r -i 's/^[ ]+\t/\t/'

At the same time, fix two warning by running checkpatch.pl:
	WARNING: suspect code indent for conditional statements (16, 16)
	WARNING: braces {} are not necessary for single statement blocks
Signed-off-by: NHui Tang <tanghui20@huawei.com>
Signed-off-by: NHerbert Xu <herbert@gondor.apana.org.au>

Fix some spelling mistakes in comments:
cipherntext ==> ciphertext
syncronise ==> synchronise
feeded ==> fed
Signed-off-by: NZhen Lei <thunder.leizhen@huawei.com>
Signed-off-by: NHerbert Xu <herbert@gondor.apana.org.au>

Remove leading spaces before tabs in Kconfig file(s) by running the
following command:

  $ find drivers/char/hw_random -name 'Kconfig*' | x\
    args sed -r -i 's/^[ ]+\t/\t/'
Signed-off-by: NJuerg Haefliger <juergh@canonical.com>
Signed-off-by: NHerbert Xu <herbert@gondor.apana.org.au>

Remove the unused macro ICP_DH895XCC_PESRAM_BAR_SIZE in the firmware
loader.

This is to fix the following warning when compiling the driver using the
clang compiler with CC=clang W=2:

    drivers/crypto/qat/qat_common/qat_uclo.c:345:9: warning: macro is not used [-Wunused-macros]
Signed-off-by: NJack Xu <jack.xu@intel.com>
Co-developed-by: NZhehui Xiang <zhehui.xiang@intel.com>
Signed-off-by: NZhehui Xiang <zhehui.xiang@intel.com>
Reviewed-by: NGiovanni Cabiddu <giovanni.cabiddu@intel.com>
Signed-off-by: NHerbert Xu <herbert@gondor.apana.org.au>

Check the return code of the function qat_hal_rd_rel_reg() and return it
to the caller.

This is to fix the following warning when compiling the driver with
clang scan-build:

    drivers/crypto/qat/qat_common/qat_hal.c:1436:2: warning: 6th function call argument is an uninitialized value
Signed-off-by: NJack Xu <jack.xu@intel.com>
Co-developed-by: NZhehui Xiang <zhehui.xiang@intel.com>
Signed-off-by: NZhehui Xiang <zhehui.xiang@intel.com>
Reviewed-by: NGiovanni Cabiddu <giovanni.cabiddu@intel.com>
Signed-off-by: NHerbert Xu <herbert@gondor.apana.org.au>

Change the return status to error if MMP file size is too large so the
driver load fails early if a large MMP firmware is loaded.
Signed-off-by: NJack Xu <jack.xu@intel.com>
Co-developed-by: NZhehui Xiang <zhehui.xiang@intel.com>
Signed-off-by: NZhehui Xiang <zhehui.xiang@intel.com>
Reviewed-by: NGiovanni Cabiddu <giovanni.cabiddu@intel.com>
Signed-off-by: NHerbert Xu <herbert@gondor.apana.org.au>

Change "sram_visible" to "mmp_sram_size" and compare it with the MMP
size to prevent an overly large MMP file being written to SRAM.
Signed-off-by: NJack Xu <jack.xu@intel.com>
Co-developed-by: NZhehui Xiang <zhehui.xiang@intel.com>
Signed-off-by: NZhehui Xiang <zhehui.xiang@intel.com>
Reviewed-by: NGiovanni Cabiddu <giovanni.cabiddu@intel.com>
Signed-off-by: NHerbert Xu <herbert@gondor.apana.org.au>

Save the return value of qat_uclo_map_auth_fw() function so that the
function qat_uclo_wr_mimage() could return the correct value.
This way, the procedure of adf_gen2_ae_fw_load() function could stop
and exit properly by checking the return value of qat_uclo_wr_mimage().
Signed-off-by: NJack Xu <jack.xu@intel.com>
Co-developed-by: NZhehui Xiang <zhehui.xiang@intel.com>
Signed-off-by: NZhehui Xiang <zhehui.xiang@intel.com>
Reviewed-by: NGiovanni Cabiddu <giovanni.cabiddu@intel.com>
Signed-off-by: NHerbert Xu <herbert@gondor.apana.org.au>

If an error occurs after calling 'sp_get_irqs()', 'sp_free_irqs()' must be
called as already done in the error handling path.

Fixes: f4d18d65 ("crypto: ccp - Abstract interrupt registeration")
Signed-off-by: NChristophe JAILLET <christophe.jaillet@wanadoo.fr>
Acked-by: NJohn Allen <john.allen@amd.com>
Signed-off-by: NHerbert Xu <herbert@gondor.apana.org.au>

Kunpeng930 could be able to close master ooo when NFE occurs, which will
disable memory accessing from device and execute tasks. This ensures that
errors do not spread.

This patch enables the hardware to close master ooo when an error occurs
by writing hardware registers, and ensures that the driver will not drain
qp because the hardware will empty the tasks automatically.
Signed-off-by: NWeili Qian <qianweili@huawei.com>
Signed-off-by: NHerbert Xu <herbert@gondor.apana.org.au>

In order to avoid reporting an exception but the error type is not
configured, the driver needs to configure the error type first, and then
enable the error interrupt. Before executing the task, hardware error
initialization is needed so that the hardware can detect the error in time.
Signed-off-by: NWeili Qian <qianweili@huawei.com>
Signed-off-by: NHerbert Xu <herbert@gondor.apana.org.au>

Before device reset, the driver sets 'QM_RESETTING' flag, but after reset,
the wrong flag is cleared. This patch modifies the problem of inconsistent
flags.
Signed-off-by: NWeili Qian <qianweili@huawei.com>
Signed-off-by: NHerbert Xu <herbert@gondor.apana.org.au>

The device needs to be initialized first, and then restart the queue to
execute tasks after PF reset.
Signed-off-by: NWeili Qian <qianweili@huawei.com>
Signed-off-by: NHerbert Xu <herbert@gondor.apana.org.au>

The sa_ul_probe creates child devices using of_platform_populate(),
but these are not cleaned up in driver remove. Clean these up
by removing the child devices using of_platform_depopulate().
Signed-off-by: NSuman Anna <s-anna@ti.com>
Reviewed-by: NTero Kristo <kristo@kernel.org>
Signed-off-by: NHerbert Xu <herbert@gondor.apana.org.au>

Simplify the platform_get_resource() and devm_ioremap_resource()
calls with devm_platform_ioremap_resource(). Also add error checking
and move up this block to simplify the cleanup in sa_ul_probe().
Signed-off-by: NSuman Anna <s-anna@ti.com>
Reviewed-by: NTero Kristo <kristo@kernel.org>
Signed-off-by: NHerbert Xu <herbert@gondor.apana.org.au>

Simplify the probe function by using the of_device_get_match_data()
helper instead of open coding. The logic is also moved up to fix the
missing pm_runtime cleanup in case of a match failure.

Fixes: 0bc42311 ("crypto: sa2ul - Add support for AM64")
Signed-off-by: NSuman Anna <s-anna@ti.com>
Reviewed-by: NTero Kristo <kristo@kernel.org>
Signed-off-by: NHerbert Xu <herbert@gondor.apana.org.au>

The pm_runtime APIs added first in commit 7694b6ca ("crypto: sa2ul -
Add crypto driver") are not unwound properly and was fixed up partially
in commit 13343bad ("crypto: sa2ul - Fix PM reference leak in
sa_ul_probe()"). This fixed up the pm_runtime usage count but not the
state. Fix this properly.

Fixes: 13343bad ("crypto: sa2ul - Fix PM reference leak in sa_ul_probe()")
Signed-off-by: NSuman Anna <s-anna@ti.com>
Reviewed-by: NTero Kristo <kristo@kernel.org>
Signed-off-by: NHerbert Xu <herbert@gondor.apana.org.au>

The sa_dma_init() function doesn't release the requested dma channels
on all failure paths. Any failure in this function also ends up
leaking the dma pool created in sa_init_mem() in the sa_ul_probe()
function. Fix all of these issues.

Fixes: 7694b6ca ("crypto: sa2ul - Add crypto driver")
Signed-off-by: NSuman Anna <s-anna@ti.com>
Reviewed-by: NTero Kristo <kristo@kernel.org>
Signed-off-by: NHerbert Xu <herbert@gondor.apana.org.au>

The TI K3 family of SoCs have a SA2UL IP that contains a
SafeXcel IP-76 RNG block which is supported by the OMAP
RNG driver. Allow this driver to be built for TI K3
family as well.
Signed-off-by: NSuman Anna <s-anna@ti.com>
Reviewed-by: NTero Kristo <kristo@kernel.org>
Signed-off-by: NHerbert Xu <herbert@gondor.apana.org.au>

Return error immediately if it goto 'default' path.
Signed-off-by: NHui Tang <tanghui20@huawei.com>
Signed-off-by: NHerbert Xu <herbert@gondor.apana.org.au>

Delete rudundant macro definition.
Signed-off-by: NHui Tang <tanghui20@huawei.com>
Signed-off-by: NHerbert Xu <herbert@gondor.apana.org.au>

Use 'GENMASK' to generate mask value, just make the code clearer.
Signed-off-by: NHui Tang <tanghui20@huawei.com>
Signed-off-by: NHerbert Xu <herbert@gondor.apana.org.au>

Delete rudundant variable initialization.
Signed-off-by: NHui Tang <tanghui20@huawei.com>
Signed-off-by: NHerbert Xu <herbert@gondor.apana.org.au>

Remove complex macro of 'HPRE_DEV' and replace with the initialized
device pointer.
Signed-off-by: NHui Tang <tanghui20@huawei.com>
Signed-off-by: NHerbert Xu <herbert@gondor.apana.org.au>

Functional macro lacks type checking, which is not as strict as function
call checking.
Signed-off-by: NHui Tang <tanghui20@huawei.com>
Signed-off-by: NHerbert Xu <herbert@gondor.apana.org.au>

Only init a structure member each line, just to keep the code neat.
Signed-off-by: NHui Tang <tanghui20@huawei.com>
Signed-off-by: NHerbert Xu <herbert@gondor.apana.org.au>

The macro 'HPRE_ADDR' is unnecessary, so expanding it.
Signed-off-by: NHui Tang <tanghui20@huawei.com>
Signed-off-by: NHerbert Xu <herbert@gondor.apana.org.au>

Currently, an invalid dma address may be unmapped when calling
'xx_data_clr_all' in error path, so check dma address of sqe in/out
if initialized before calling 'dma_free_coherent' or 'dma_unmap_single'.

Fixes: a9214b0b ("crypto: hisilicon - fix the check on dma address")
Signed-off-by: NHui Tang <tanghui20@huawei.com>
Signed-off-by: NHerbert Xu <herbert@gondor.apana.org.au>

Currently,'cra_driver_name' cannot be used to specify ecdh algorithm
with a special curve, so extending it with curve name.

Fixes: 6763f5ea ("crypto: ecdh - move curve_id of ECDH from ...")
Signed-off-by: NHui Tang <tanghui20@huawei.com>
Signed-off-by: NHerbert Xu <herbert@gondor.apana.org.au>

Currently, 'cra_driver_name' cannot be used to specify ecdh algorithm
with a special curve, so extending it with curve name.

Although using 'cra_name' can also specify a special curve, but ecdh
generic driver cannot be specified when vendor hardware accelerator
has registered.

Fixes: 6763f5ea ("crypto: ecdh - move curve_id of ECDH from ...")
Signed-off-by: NHui Tang <tanghui20@huawei.com>
Signed-off-by: NHerbert Xu <herbert@gondor.apana.org.au>

Actual data length of the 'secret' is not equal to the 'secret_size'.

Since the 'curve_id' has removed in the 'secret', the 'secret_size'
should subtract the length of the 'curve_id'.

Fixes: 6763f5ea ("crypto: ecdh - move curve_id of ECDH from ...")
Signed-off-by: NHui Tang <tanghui20@huawei.com>
Signed-off-by: NHerbert Xu <herbert@gondor.apana.org.au>

Fix to return a negative error code from the error handling
case instead of 0, as done elsewhere in this function.

Fixes: 8a63b199 ("crypto: ux500 - Add driver for HASH hardware")
Reported-by: NHulk Robot <hulkci@huawei.com>
Signed-off-by: NZhen Lei <thunder.leizhen@huawei.com>
Reviewed-by: NLinus Walleij <linus.walleij@linaro.org>
Signed-off-by: NHerbert Xu <herbert@gondor.apana.org.au>

This patch adds missing MODULE_DEVICE_TABLE definition which generates
correct modalias for automatic loading of this driver when it is built
as an external module.
Reported-by: NHulk Robot <hulkci@huawei.com>
Signed-off-by: NBixuan Cui <cuibixuan@huawei.com>
Signed-off-by: NHerbert Xu <herbert@gondor.apana.org.au>

Fix function name in nitrox_reqmgr.c kernel-doc comment
to remove a warning.

drivers/crypto/cavium/nitrox/nitrox_reqmgr.c:382: warning: expecting
prototype for nitrox_se_request(). Prototype was for
nitrox_process_se_request() instead
Reported-by: NAbaci Robot <abaci@linux.alibaba.com>
Signed-off-by: NYang Li <yang.lee@linux.alibaba.com>
Signed-off-by: NHerbert Xu <herbert@gondor.apana.org.au>

Pointer 'sg' is being initialized however this value is never
read as 'sg' is assigned a same value in for_each_sg().
Remove the redundant assignment.

Cleans up clang warning:

drivers/crypto/cavium/nitrox/nitrox_reqmgr.c:161:22: warning: Value
stored to 'sg' during its initialization is never read
[clang-analyzer-deadcode.DeadStores]
Reported-by: NAbaci Robot <abaci@linux.alibaba.com>
Signed-off-by: NYang Li <yang.lee@linux.alibaba.com>
Signed-off-by: NHerbert Xu <herbert@gondor.apana.org.au>

No maintainer exists for ixp4xx_crypto, since I have access to a board
with it, I propose to maintain it.
Signed-off-by: NCorentin Labbe <clabbe@baylibre.com>
Signed-off-by: NHerbert Xu <herbert@gondor.apana.org.au>