This is now truly only duct-tape to keep locking checks happy since
calling this function when hpd or polling are already enabled is a
bug. The fbdev helper can't cope with hotplug changes yet at this
point, only after that.

Otoh a bit more robustness in this function can't hurt, and with this
fbdev can actually cope with hotplug changes. And it's also more
consistent with the connector hotadd/remove dp mst needs to do.
Therefore document this as new official behavior.
Reviewed-by: NMaarten Lankhorst <maarten.lankhorst@linux.intel.com>
Signed-off-by: NDaniel Vetter <daniel.vetter@intel.com>

And roll them out across drm_* files. The point here isn't code
prettification (it helps with that too) but that some of these lists
aren't static any more. And having macros will gives us a convenient
place to put locking checks into.

I didn't add an iterator for props since that's only used by a
list_for_each_entry_safe in the driver teardown code.

Search&replace was done with the below cocci spatch. Note that there's
a bunch more places that didn't match and which would need some manual
changes, but I've intentially left these out for this mostly automated
patch.

iterator name drm_for_each_crtc;
struct drm_crtc *crtc;
struct drm_device *dev;
expression head;
@@
- list_for_each_entry(crtc, &dev->mode_config.crtc_list, head) {
+ drm_for_each_crtc (crtc, dev) {
...
}

@@
iterator name drm_for_each_encoder;
struct drm_encoder *encoder;
struct drm_device *dev;
expression head;
@@
- list_for_each_entry(encoder, &dev->mode_config.encoder_list, head) {
+ drm_for_each_encoder (encoder, dev) {
...
}

@@
iterator name drm_for_each_fb;
struct drm_framebuffer *fb;
struct drm_device *dev;
expression head;
@@
- list_for_each_entry(fb, &dev->mode_config.fb_list, head) {
+ drm_for_each_fb (fb, dev) {
...
}

@@
iterator name drm_for_each_connector;
struct drm_connector *connector;
struct drm_device *dev;
expression head;
@@
- list_for_each_entry(connector, &dev->mode_config.connector_list, head) {
+ drm_for_each_connector (connector, dev) {
...
}
Reviewed-by: NMaarten Lankhorst <maarten.lankhorst@linux.intel.com>
Signed-off-by: NDaniel Vetter <daniel.vetter@intel.com>

This really doesn't seem to have much chance of working anymore,

esp for irq context, qxl at least tries to talk to the hw,
and waits for irqs, and fails.

with runtime pm and other stuff I think we should just
bail on this for now.
Signed-off-by: NDave Airlie <airlied@redhat.com>
Signed-off-by: NDaniel Vetter <daniel.vetter@ffwll.ch>

They are not to be modified.

Generated using the semantic patch:

@@
@@
(
  const struct drm_crtc_helper_funcs *
|
- struct drm_crtc_helper_funcs *
+ const struct drm_crtc_helper_funcs *
)

@@
@@
(
  const struct drm_encoder_helper_funcs *
|
- struct drm_encoder_helper_funcs *
+ const struct drm_encoder_helper_funcs *
)

@@
@@
(
  const struct drm_connector_helper_funcs *
|
- struct drm_connector_helper_funcs *
+ const struct drm_connector_helper_funcs *
)

@@
@@
(
  const struct drm_plane_helper_funcs *
|
- struct drm_plane_helper_funcs *
+ const struct drm_plane_helper_funcs *
)
Signed-off-by: NJani Nikula <jani.nikula@intel.com>
Reviewed-by: NChristian König <christian.koenig@amd.com>
Signed-off-by: NDaniel Vetter <daniel.vetter@ffwll.ch>

mode is always NULL at this point in the function, so make our intention
clear.
Signed-off-by: NDaniel Stone <daniels@collabora.com>
[danvet: Stop clearing mode too to enlist gcc in tracking
uninitialized usage. And remove a space while at it.]
Signed-off-by: NDaniel Vetter <daniel.vetter@ffwll.ch>

We don't want tile 0,0 to artificially constrain the size of the legacy
fbdev device.  Instead when reducing fb_size to be the minimum of all
displays, only consider the rightmost and bottommost tiles.
Signed-off-by: NRob Clark <robdclark@gmail.com>
Tested-by: NHai Li <hali@codeaurora.org>
Reviewed-by: NAlex Deucher <alexander.deucher@amd.com>
Signed-off-by: NDaniel Vetter <daniel.vetter@ffwll.ch>

Flip conditional to reduce indentation level of rest of fxn, and use
min/max to make the code clearer.

v2: surface_width -> surface_height typo
Signed-off-by: NRob Clark <robdclark@gmail.com>
Reviewed-by: NDaniel Kurtz <djkurtz@chromium.org>
Reviewed-by: NAlex Deucher <alexander.deucher@amd.com>
Signed-off-by: NDaniel Vetter <daniel.vetter@ffwll.ch>

VT switch back/forth from console to xserver (for example) has potential
to go horribly wrong if a dynamic DP MST connector ends up in the saved
modeset that is restored when switching back to fbcon.

When removing a dynamic connector, don't forget to clean up the saved
state.

v1: original
v2: null out set->fb if no more connectors to avoid making i915 cranky

Bugzilla: https://bugzilla.redhat.com/show_bug.cgi?id=1184968
Cc: stable@vger.kernel.org #v3.17+
Signed-off-by: NRob Clark <robdclark@gmail.com>
Signed-off-by: NDave Airlie <airlied@redhat.com>

Make drm_fb_helper_initial_config() return an int rather than a bool so
that the error can be properly propagated. While at it, update drivers
to propagate errors further rather than just ignore them.

v2:
- cirrus: No cleanup is required, the top-level cirrus_driver_load()
  will do it as part of cirrus_driver_unload() in its cleanup path.
Reported-by: NFengguang Wu <fengguang.wu@intel.com>

Cc: David Airlie <airlied@linux.ie>
Cc: Daniel Vetter <daniel.vetter@ffwll.ch>
Cc: Patrik Jakobsson <patrik.r.jakobsson@gmail.com>
Cc: Rob Clark <robdclark@gmail.com>
Cc: Tomi Valkeinen <tomi.valkeinen@ti.com>
Cc: Alex Deucher <alexander.deucher@amd.com>
Cc: Christian König <christian.koenig@amd.com>
Cc: Ben Skeggs <bskeggs@redhat.com>
Signed-off-by: NThierry Reding <treding@nvidia.com>
Reviewed-by: NAlex Deucher <alexander.deucher@amd.com>
Reviewed-by: NPatrik Jakobsson <patrik.r.jakobsson@gmail.com>
Reviewed-by: NChristian König <christian.koenig@amd.com>
[danvet: Squash in simplification patch from kbuild.]
Signed-off-by: NDaniel Vetter <daniel.vetter@ffwll.ch>

There are still some places in the fb helper that need to avoid
sleeping in panic context. Here's an example:

[   65.615496] bad: scheduling from the idle thread!
[   65.620747] CPU: 92 PID: 0 Comm: swapper/92 Tainted: G   M        E  3.18.0-rc4-7-default+ #20

[   65.630364] Hardware name: Intel Corporation BRICKLAND/BRICKLAND, BIOS
BRHSXSD1.86B.0056.R01.1409242327 09/24/2014
[   65.641923]  ffff88087f693d80 ffff88087f689878 ffffffff81566db9 0000000000000000
[   65.650226]  ffff88087f693d80 ffff88087f689898 ffffffff810871ff ffff88046eb3e0d0
[   65.658527]  ffff88087f693d80 ffff88087f6898c8 ffffffff8107c1fa 000000017f6898b8
[   65.666830] Call Trace:
[   65.669557]  <#MC>  [<ffffffff81566db9>] dump_stack+0x46/0x58
[   65.675994]  [<ffffffff810871ff>] dequeue_task_idle+0x2f/0x40
[   65.682412]  [<ffffffff8107c1fa>] dequeue_task+0x5a/0x80
[   65.688345]  [<ffffffff810804f3>] deactivate_task+0x23/0x30
[   65.694569]  [<ffffffff81569050>] __schedule+0x580/0x7f0
[   65.700502]  [<ffffffff81569739>] schedule_preempt_disabled+0x29/0x70
[   65.707696]  [<ffffffff8156abb6>] __ww_mutex_lock_slowpath+0xb8/0x162
[   65.714891]  [<ffffffff8156acb3>] __ww_mutex_lock+0x53/0x85
[   65.721125]  [<ffffffffa00b3a5d>] drm_modeset_lock+0x3d/0x110 [drm]
[   65.728132]  [<ffffffffa00b3c2a>] __drm_modeset_lock_all+0x8a/0x120 [drm]
[   65.735721]  [<ffffffffa00b3cd0>] drm_modeset_lock_all+0x10/0x30 [drm]
[   65.743015]  [<ffffffffa01af8bf>] drm_fb_helper_pan_display+0x2f/0xf0 [drm_kms_helper]
[   65.751857]  [<ffffffff8132bd21>] fb_pan_display+0xd1/0x1a0
[   65.758081]  [<ffffffff81326010>] bit_update_start+0x20/0x50
[   65.764400]  [<ffffffff813259f2>] fbcon_switch+0x3a2/0x550
[   65.770528]  [<ffffffff813a01c9>] redraw_screen+0x189/0x240
[   65.776750]  [<ffffffff81322f8a>] fbcon_blank+0x20a/0x2d0
[   65.782778]  [<ffffffff8137d359>] ? erst_writer+0x209/0x330
[   65.789002]  [<ffffffff810ba2f3>] ? internal_add_timer+0x63/0x80
[   65.795710]  [<ffffffff810bc137>] ? mod_timer+0x127/0x1e0
[   65.801740]  [<ffffffff813a0cd8>] do_unblank_screen+0xa8/0x1d0
[   65.808255]  [<ffffffff813a0e10>] unblank_screen+0x10/0x20
[   65.814381]  [<ffffffff812ca0d9>] bust_spinlocks+0x19/0x40
[   65.820508]  [<ffffffff81561ca7>] panic+0x106/0x1f5
[   65.825955]  [<ffffffff8102336c>] mce_panic+0x2ac/0x2e0
[   65.831789]  [<ffffffff812c796a>] ? delay_tsc+0x4a/0x80
[   65.837625]  [<ffffffff81024e1f>] do_machine_check+0xbaf/0xbf0
[   65.844138]  [<ffffffff813365d7>] ? intel_idle+0xc7/0x150
[   65.850166]  [<ffffffff8156f03f>] machine_check+0x1f/0x30
[   65.856195]  [<ffffffff813365d7>] ? intel_idle+0xc7/0x150
[   65.862222]  <<EOE>>  [<ffffffff814283d5>] cpuidle_enter_state+0x55/0x170
[   65.869823]  [<ffffffff814285a7>] cpuidle_enter+0x17/0x20
[   65.875852]  [<ffffffff81097b08>] cpu_startup_entry+0x2d8/0x370
[   65.882467]  [<ffffffff8102fe29>] start_secondary+0x159/0x180

There's __drm_modeset_lock_all() which Daniel Vetter introduced for this
purpose. We can leverage that without reinventing anything. This patch
works with the latest kernel.
Reviewed-by: NRob Clark <robdclark@gmail.com>
Tested-by: NTony Luck <tony.luck@intel.com>
Signed-off-by: NRui Wang <rui.y.wang@intel.com>
Signed-off-by: NDave Airlie <airlied@redhat.com>

This adds fbdev/con support for tiled monitors, so that we
only set a mode on the correct half of the monitor, or
span the two halves if needed.

v2: remove unneeded ERROR, fix | vs ||
Signed-off-by: NDave Airlie <airlied@redhat.com>

On MST systems the monitors don't appear when we set the fb up,
but plymouth opens the drm device and holds it open while they
come up, when plymouth finishes and lastclose gets called we
don't do the delayed fb probe, so the monitor never appears on the
console.

Fix this by moving the delayed checking into the mode restore.

v2: Daniel suggested that ->delayed_hotplug is set under
the mode_config mutex, so we should check it under that as
well, while we are in the area.
Reviewed-by: NDaniel Vetter <daniel.vetter@ffwll.ch>
Cc: stable@vger.kernel.org
Signed-off-by: NDave Airlie <airlied@redhat.com>

modeset->num_connectors must be 0 to reach the BUG_ON() which tests
for non-zero modeset->num_connectors; remove BUG_ON().
Signed-off-by: NPeter Hurley <peter@hurleysoftware.com>
Signed-off-by: NDaniel Vetter <daniel.vetter@ffwll.ch>

Make sure plane rotation is reset correctly when restoring the fbdev
configuration by using drm_mode_plane_set_obj_prop which calls the
driver's set_property callback.

The rotation reset feature was introduced in commit 9783de20 (drm:
Resetting rotation property) and the callback issue was originally
addressed in a previous version of the patch, but the fix was not
present in the final version.

v2: Fix documentation warning
    Add some more details to the commit message (Daniel Vetter)

Testcase: igt/kms_rotation_crc
Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=82236
Cc: Sonika Jindal <sonika.jindal@intel.com>
Cc: Ville Syrjälä <ville.syrjala@linux.intel.com>
Cc: Dave Airlie <airlied@gmail.com>
Cc: Daniel Vetter <daniel.vetter@ffwll.ch>
Signed-off-by: NThomas Wood <thomas.wood@intel.com>
Signed-off-by: NDaniel Vetter <daniel.vetter@ffwll.ch>

Static analysers find it 'suspicious', that we're trying to allocate memory for
elements of size sizeof(struct drm_fb_helper_connector) when the array is
defined as struct drm_fb_helper_connector **.

Use sizeof(struct drm_fb_helper_connector *) instead.

Note that the structure being defined as:

struct drm_fb_helper_connector {
	struct drm_connector *connector;
};

This was still doing the right thing, but may not in the future if
additional fields are added.

Cc: Todd Previte <tprevite@gmail.com>
Cc: Dave Airlie <airlied@redhat.com>
Signed-off-by: NDamien Lespiau <damien.lespiau@intel.com>
Signed-off-by: NDaniel Vetter <daniel.vetter@ffwll.ch>

In the fbdev code we want to do trylocks only to avoid deadlocks and
other ugly issues. Thus far we've only grabbed the overall modeset
lock, but that already failed to exclude a pile of potential
concurrent operations. With proper atomic support this will be worse.

So add a trylock mode to the modeset locking code which attempts all
locks only with trylocks, if possible. We need to track this in the
locking functions themselves and can't restrict this to drivers since
driver-private w/w mutexes must be treated the same way.

There's still the issue that other driver private locks aren't handled
here at all, but well can't have everything. With this we will at
least not regress, even once atomic allows lots of concurrent kms
activity.

Aside: We should move the acquire context to stack-based allocation in
the callers to get rid of that awful WARN_ON(kmalloc_failed) control
flow which just blows up when memory is short. But that's material for
separate patches.

v2:
- Fix logic inversion fumble in the fb helper.
- Add proper kerneldoc.
Reviewed-by: NMatt Roper <matthew.d.roper@intel.com>
Signed-off-by: NDaniel Vetter <daniel.vetter@ffwll.ch>

Reset rotation property to 0.

v2: Resetting after disabling the plane
Signed-off-by: NSonika Jindal <sonika.jindal@intel.com>
Reviewed-by: NVille Syrjälä <ville.syrjala@linux.intel.com>
Acked-by: NDave Airlie <airlied@gmail.com>
Signed-off-by: NDaniel Vetter <daniel.vetter@ffwll.ch>

i915.ko has a custom fbdev initialisation routine that aims to preserve
the current mode set by the BIOS, unless overruled by the user. The
user's wishes are determined by what, if any, mode is specified on the
command line (via the video= parameter). However, that command line mode
is first parsed by drm_fb_helper_initial_config() which is called after
i915.ko's custom initial_config() as a fallback method. So in order for
us to honour it, we need to move the cmdline parser earlier. If we
perform the connector cmdline parsing as soon as we initialise the
connector, that cmdline mode and forced status is then available even if
the fbdev helper is not compiled in or never called.

We also then expose the cmdline user mode in the connector mode lists.

v2: Rebase after connector->name upheaval.

v3: Adapt mga200 to look for the cmdline mode in the new place. Nicely
simplifies things while at that.

v4: Fix checkpatch.

v5: Select FB_CMDLINE to adapt to the changed fbdev patch.

Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=73154
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk> (v2)
Cc: Jesse Barnes <jbarnes@virtuousgeek.org>
Cc: Ville Syrjälä <ville.syrjala@linux.intel.com>
Cc: Daniel Vetter <daniel.vetter@ffwll.ch>
Reviewed-by: Jesse Barnes <jbarnes@virtuousgeek.org> (v2)
Cc: dri-devel@lists.freedesktop.org
Cc: Julia Lemire <jlemire@matrox.com>
Cc: Dave Airlie <airlied@redhat.com>
Signed-off-by: NDaniel Vetter <daniel.vetter@ffwll.ch>

This is required to get fbcon probing to work on new connectors,
callers should acquire the mode config lock before calling these.
Reviewed-by: NTodd Previte <tprevite@gmail.com>
Signed-off-by: NDave Airlie <airlied@redhat.com>

To implement hotplug detection in a race-free manner, drivers must call
drm_kms_helper_poll_init() before hotplug events can be triggered. Such
events can be triggered right after any of the encoders or connectors
are initialized. At the same time, if the drm_fb_helper_hotplug_event()
helper is used by a driver, then the poll helper requires some parts of
the FB helper to be initialized to prevent a crash.

At the same time, drm_fb_helper_init() requires information that is not
necessarily available at such an early stage (number of CRTCs and
connectors), so it cannot be used yet.

Add a new helper, drm_fb_helper_prepare(), that initializes the bare
minimum needed to allow drm_kms_helper_poll_init() to execute and any
subsequent hotplug events to be processed properly.
Reviewed-by: NDaniel Vetter <daniel.vetter@ffwll.ch>
Signed-off-by: NThierry Reding <treding@nvidia.com>
Signed-off-by: NDave Airlie <airlied@redhat.com>

Some drivers need to be able to have a perfect race-free fbcon setup.
Current drivers only enable hotplug processing after the call to
drm_fb_helper_initial_config which leaves a tiny but important race.

This race is especially noticable on embedded platforms where the
driver itself enables the voltage for the hdmi output, since only then
will monitors (after a bit of delay, as usual) respond by asserting
the hpd pin.

Most of the infrastructure is already there with the split-out
drm_fb_helper_init. And drm_fb_helper_initial_config already has all
the required locking to handle concurrent hpd events since

commit 53f1904b
Author: Daniel Vetter <daniel.vetter@ffwll.ch>
Date:   Thu Mar 20 14:26:35 2014 +0100

    drm/fb-helper: improve drm_fb_helper_initial_config locking

The only missing bit is making drm_fb_helper_hotplug_event save
against concurrent calls of drm_fb_helper_initial_config. The only
unprotected bit is the check for fb_helper->fb.

With that drivers can first initialize the fb helper, then enabel
hotplug processing and then set up the initial config all in a
completely race-free manner. Update kerneldoc and convert i915 as a
proof of concept.

Feature requested by Thierry since his tegra driver atm reliably boots
slowly enough to misses the hotplug event for an external hdmi screen,
but also reliably boots to quickly for the hpd pin to be asserted when
the fb helper calls into the hdmi ->detect function.

Cc: Thierry Reding <treding@nvidia.com>
Signed-off-by: NDaniel Vetter <daniel.vetter@ffwll.ch>
Signed-off-by: NThierry Reding <treding@nvidia.com>
Signed-off-by: NDave Airlie <airlied@redhat.com>

The following list empty check is unnecessary because we would still do nothing
real and return 'val' if my_list is empty.

if (list_empty(&my_list))
	return val;

list_for_each_entry(pos, &my_list, member) {
	...
}

return val;

This patch removes the unnecessary check in drm_fb_helper_debug_enter().
Signed-off-by: NLiu Ying <Ying.Liu@freescale.com>
Signed-off-by: NDaniel Vetter <daniel.vetter@ffwll.ch>

The variable info->fix.type_aux is set to zero twice in the function
drm_fb_helper_fill_fix().  This patch removes one redundant.
Signed-off-by: NLiu Ying <Ying.Liu@freescale.com>
Signed-off-by: NDaniel Vetter <daniel.vetter@ffwll.ch>

All drm_fb_helper_restore_fbdev_mode() call sites, save one, do the same
locking.  Simplify this into drm_fb_helper_restore_fbdev_mode_unlocked().
Signed-off-by: NRob Clark <robdclark@gmail.com>
Reviewed-by: NDaniel Vetter <daniel.vetter@ffwll.ch>
Signed-off-by: NDave Airlie <airlied@redhat.com>

For atomic, it will be quite necessary to not need to care so much
about locking order.  And 'state' gives us a convenient place to stash a
ww_ctx for any sort of update that needs to grab multiple crtc locks.

Because we will want to eventually make locking even more fine grained
(giving locks to planes, connectors, etc), split out drm_modeset_lock
and drm_modeset_acquire_ctx to track acquired locks.

Atomic will use this to keep track of which locks have been acquired
in a transaction.

v1: original
v2: remove a few things not needed until atomic, for now
v3: update for v3 of connection_mutex patch..
v4: squash in docbook
v5: doc tweaks/fixes
Signed-off-by: NRob Clark <robdclark@gmail.com>
Reviewed-by: NDaniel Vetter <daniel.vetter@ffwll.ch>
Signed-off-by: NDave Airlie <airlied@redhat.com>

Generated using semantic patch:

@@
expression E;
@@

- drm_get_connector_name(E)
+ E->name

[airlied: regenerated]
Acked-by: NDavid Herrmann <dh.herrmann@gmail.com>
Signed-off-by: NJani Nikula <jani.nikula@intel.com>
Signed-off-by: NDave Airlie <airlied@redhat.com>

Fix a few trivial typos in the framebuffer helper documentation.
Signed-off-by: NThierry Reding <treding@nvidia.com>
Signed-off-by: NDaniel Vetter <daniel.vetter@ffwll.ch>

Commit 62ff94a5 "drm/crtc-helper: remove LOCKING from kerneldoc"
causes drm_helper_crtc_in_use() and drm_helper_encoder_in_use() to
complain loudly during a kernel panic or sysrq processing. This is
caused by nobody acquiring the modeset lock in these code paths.

This patch fixes this by trying to acquire the modeset lock for each
FB helper that's forced to kernel mode. If the lock can't be acquired,
it's likely that somebody else is performing a modeset. However, doing
another modeset concurrently might make things even worse, so the safe
option is to simply bail out in that case.
Reviewed-by: NDaniel Vetter <daniel.vetter@ffwll.ch>
Reviewed-by: NDavid Herrmann <dh.herrmann@gmail.com>
Signed-off-by: NThierry Reding <treding@nvidia.com>
Signed-off-by: NDaniel Vetter <daniel.vetter@ffwll.ch>

Currently drm_pick_cmdline_mode() doesn't care about the interlace
when the given mode line has no "i" suffix.  That is, when there are
multiple entries for the same resolution, an interlace mode might be
picked up just depending on the assigned order, and there is no way to
exclude it.

This patch changes the logic for the mode selection, to prefer the
noninterlace mode unless the interlace mode is explicitly given.
When no matching mode is found, it still tries the interlace mode as
fallback.
Signed-off-by: NTakashi Iwai <tiwai@suse.de>
Reviewed-by: NDaniel Vetter <daniel.vetter@ffwll.ch>
Signed-off-by: NDave Airlie <airlied@redhat.com>

Now that CRTC's have a primary plane, there's no need to track the
framebuffer in the CRTC.  Replace all references to the CRTC fb with the
primary plane's fb.

This patch was generated by the Coccinelle semantic patching tool using
the following rules:

        @@ struct drm_crtc C; @@
        -   (C).fb
        +   C.primary->fb

        @@ struct drm_crtc *C; @@
        -   (C)->fb
        +   C->primary->fb

v3: Generate patch via coccinelle.  Actual removal of crtc->fb has been
    moved to a subsequent patch.

v2: Fixup several lingering crtc->fb instances that were missed in the
    first patch iteration.  [Rob Clark]
Signed-off-by: NMatt Roper <matthew.d.roper@intel.com>
Reviewed-by: NRob Clark <robdclark@gmail.com>

The DRM core currently only tracks "overlay"-style planes.  Start
refactoring the plane handling to allow other plane types (primary and
cursor) to also be placed on the DRM plane list.

v2: Add drm_for_each_legacy_plane() iterator to smooth transition
    of drivers with plane loops.
Signed-off-by: NMatt Roper <matthew.d.roper@intel.com>
Reviewed-by: NRob Clark <robdclark@gmail.com>

The locking in drm_fb_helper_initial_config is a bit troublesome for a
few reasons:

- We can't just wrap the entire function up into modeset locks since
  the fbdev registration might call down into fbcon code, which then
  through our ->set_par implementation needs to be able to grab all
  modeset locks. So we'd have a neat deadlock.

- This implies though that all current callers don't hold any modeset
  locks by necessity, so we have free reign to grab any modeset locks
  we need to grab.

- The private state of the fbdev helper doesn't need any protection
  through locks, since once we have the fbdev registered it is mostly
  invariant or protected through the modeset locking in ->set_par and
  other callbacks. We can fully rely on driver having non-racy setup
  sequences here. For the initial config computation we actually may
  not grab locks since drivers which provide their own magic sauce
  (like i915) might need to grab locks themselves.

- We should grab locks though when we probe outputs. Currently there's
  not much risk, but already now userspace could start poking at sysfs
  files and so probe concurrently. I expect that in the future driver
  init will be much more async, and since probing is really
  time-consuming this is a prime candidate.

- We must not hold any crtc->mutex locks while calling probe functions
  since those might need to lock a crtc for e.g. load detection. i915
  is such a driver.

Also it's the probing calls which hit upon piles of new locking
asserts I've recently added in

commit 62ff94a5
Author: Daniel Vetter <daniel.vetter@ffwll.ch>
Date:   Thu Jan 23 22:18:47 2014 +0100

    drm/crtc-helper: remove LOCKING from kerneldoc

and

commit 63951385
Author: Daniel Vetter <daniel.vetter@ffwll.ch>
Date:   Thu Jan 23 15:14:15 2014 +0100

    drm/doc: Repleace LOCKING kerneldoc sections in drm_modes.c

Hence the right fix is to grab the mode_config mutex, but only that
and only right around the probe calls.

It seems to be sufficient to shut up all the locking WARNINGs I see on
i915 and nouveau in drm_fb_helper_initial_config.
Signed-off-by: NDaniel Vetter <daniel.vetter@ffwll.ch>
Tested-by: NThierry Reding <treding@nvidia.com>
Signed-off-by: NDave Airlie <airlied@redhat.com>

Since we cannot make sure the 'max_conn_count' will always be none
zero from the users, and then if max_conn_count equals to zero, the
kcalloc() will return ZERO_SIZE_PTR, which equals to ((void *)16).

So this patch fix this with just doing the 'max_conn_count' zero check
in the front of drm_fb_helper_init().
Signed-off-by: NXiubo Li <Li.Xiubo@freescale.com>
CC: Jani Nikula <jani.nikula@linux.intel.com>
Signed-off-by: NDaniel Vetter <daniel.vetter@ffwll.ch>

Use drm_fb_helper_restore_fbdev_mode() in drm_fb_helper_set_par() to
make sure extra planes get disabled whenever fbcon takes over.

Otherwise the code in drm_fb_helper_set_par() was already doing the
exact same thing as drm_fb_helper_restore_fbdev_mode(), so this doesn't
change the behaviour in any other way.
Signed-off-by: NVille Syrjälä <ville.syrjala@linux.intel.com>
Signed-off-by: NDaniel Vetter <daniel.vetter@ffwll.ch>

There's a neat FIXME asking whether this is really need. I'd
say really no.
Reviewed-by: NAlex Deucher <alexander.deucher@amd.com>
Signed-off-by: NDaniel Vetter <daniel.vetter@ffwll.ch>

This allows drivers to use them in custom initial_config functions.
Signed-off-by: NJesse Barnes <jbarnes@virtuousgeek.org>
Acked-by: NDave Airlie <airlied@gmail.com>
Signed-off-by: NDaniel Vetter <daniel.vetter@ffwll.ch>

Sometimes we want to disable all the screens on a system, because that
will allow the graphics card to be put into low-power states. The
problem is that, for example, while all screens are disabled, if we
get a hotplug interrupt, fbcon will decide to set a mode instead of
keeping everything disabled, which will remove us from our low power
states.

Let's assume that if there's a DRM master, it will be able to do
whatever is appropriate when we get the hotplug.

This problem can be reproduced by the runtime PM test program from
intel-gpu-tools: we disable all the screens so the graphics device can
be put into D3, then something triggers a hotplug interrupt, fbcon
sets a mode and breaks our test suite. The problem can be reproduced
more easily by the "i2c" subtest.

Other approaches considered for the problem:
    - Return "false" if "bound == 0" and the caller of
      drm_fb_helper_is_bound is a hotplug handler. This would break
      the case where the machine boots with no outputs connected, then
      the user plugs a monitor.
    - Add a new IOCTL to force fbcon to not set modes. This would keep
      all the current applications behaving the same, but adding a new
      IOCTL is not always the greatest idea.
    - Return false only if "dev->primary->master && bound == 0". This
      was my first implementation, but Chris suggested we should do
      the check irrespective of the "bound" variable.

Thanks to Daniel Vetter for the investigation, ideas and the
implementation of the hotplug alternative.

v2: - Do the check first, irrespective of "bound".
    - Cc dri-devel

Cc: dri-devel@lists.freedesktop.org
Credits-to: Daniel Vetter <daniel.vetter@ffwll.ch>
Signed-off-by: NPaulo Zanoni <paulo.r.zanoni@intel.com>
Reviewed-by: NDaniel Vetter <daniel.vetter@ffwll.ch>
Reviewed-by: NDavid Herrmann <dh.herrmann@gmail.com>
Signed-off-by: NDave Airlie <airlied@redhat.com>

For drivers which might want to disable fbdev legacy support.

Select the new option in all drivers for now, so this shouldn't result
in any change. Drivers need some work anyway to make fbdev support
optional (if they have it implemented, that is), so the recommended
way to expose this is by adding per-driver options. At least as long
as most drivers don't support disabling the fbdev support.

v2: Update for new drm drivers msm and rcar-du. Note that Rob's msm
driver can already take advantage of this, which allows us to build
msm without any fbdev depencies in the kernel!

v3: Move the MODULE_* stuff from the fbdev helper file to
drm_crtc_helper.c.

Cc: David Herrmann <dh.herrmann@gmail.com>
Cc: Rob Clark <robdclark@gmail.com>
Reviewed-by: NRob Clark <robdclark@gmail.com>
Acked-by: NDave Airlie <airlied@linux.ie>
Reviewed-by: NChon Ming Lee <chon.ming.lee@intel.com>
Signed-off-by: NDaniel Vetter <daniel.vetter@ffwll.ch>

This reverts commit 928c2f0c.

This patch double applied, two checks for the price of one.
Signed-off-by: NDave Airlie <airlied@redhat.com>

Signed-off-by: NDamien Lespiau <damien.lespiau@intel.com>
Signed-off-by: NDave Airlie <airlied@redhat.com>