Useful for bug reports.
Signed-off-by: NJesse Barnes <jbarnes@virtuousgeek.org>
Signed-off-by: NDaniel Vetter <daniel.vetter@ffwll.ch>

With the original PPGTT implementation if the number of PDPs was not a
power of two, the number of pages for the page tables would end up being
rounded up. The code actually had a bug here afaict, but this is a
theoretical bug as I don't believe this can actually occur with the
current code/HW..

With the rework of the page table allocations, there is no longer a
distinction between number of page table pages, and number of page
directory entries. To avoid confusion, kill the redundant (and newer)
struct member.

Cc: Imre Deak <imre.deak@intel.com>
Signed-off-by: NBen Widawsky <ben@bwidawsk.net>
Reviewed-by: NImre Deak <imre.deak@intel.com>
Signed-off-by: NDaniel Vetter <daniel.vetter@ffwll.ch>

We'll need this when we merge PC8 and Runtime PM: the PC8
enable/disable functions need that lock.

Also, it's good practice to not hold a lock for longer than strictly
needed.
Signed-off-by: NPaulo Zanoni <paulo.r.zanoni@intel.com>
Reviewed-by: NImre Deak <imre.deak@intel.com>
Signed-off-by: NDaniel Vetter <daniel.vetter@ffwll.ch>

Reproducible by runtime suspending a Haswell machine with eDP + HDMI
outputs connected.

[  209.600086] [drm:i915_runtime_suspend], Suspending device
[  209.688435] BUG: unable to handle kernel NULL pointer dereference at 0000000000000060
[  209.688500] IP: [<ffffffffa0109d4e>] i915_sink_crc+0x6e/0xf0 [i915]
[  209.688577] PGD 36aba067 PUD 35d7f067 PMD 0
[  209.688613] Oops: 0000 [#1] SMP
[  209.688641] Modules linked in: fuse ip6table_filter ip6_tables ebtable_nat ebtables iTCO_wdt iTCO_vendor_support x86_pkg_temp_thermal coretemp microcode serio_raw e1000e pcspkr i2c_i801 ptp mei_me mei lpc_ich mfd_core pps_core dm_crypt i915 i2c_algo_bit crc32_pclmul drm_kms_helper crc32c_intel drm ghash_clmulni_intel video
[  209.688893] CPU: 1 PID: 1797 Comm: pm_pc8 Not tainted 3.13.0+ #118
[  209.688937] Hardware name: Intel Corporation Shark Bay Client platform/WhiteTip Mountain 1, BIOS HSWLPTU1.86C.0133.R00.1309172123 09/17/2013
[  209.689023] task: ffff88007fb4b690 ti: ffff88007d9d2000 task.ti: ffff88007d9d2000
[  209.689074] RIP: 0010:[<ffffffffa0109d4e>]  [<ffffffffa0109d4e>] i915_sink_crc+0x6e/0xf0 [i915]
[  209.689169] RSP: 0018:ffff88007d9d3e68  EFLAGS: 00010246
[  209.689205] RAX: 0000000000000000 RBX: ffff880036a03478 RCX: ffff8800366c9770
[  209.689252] RDX: ffff88014325cf38 RSI: ffff88007fb4bd08 RDI: ffff88007fb4b690
[  209.689299] RBP: ffff88007d9d3e98 R08: 0000000000000000 R09: 0000000000000000
[  209.689346] R10: 0000000000000001 R11: 0000000000000000 R12: ffff8800366c9148
[  209.689393] R13: 00000000ffffffed R14: ffff88007d9d3f50 R15: ffff880036a03478
[  209.689441] FS:  00007f5a74bc29c0(0000) GS:ffff88014f240000(0000) knlGS:0000000000000000
[  209.689494] CS:  0010 DS: 0000 ES: 0000 CR0: 0000000080050033
[  209.689533] CR2: 0000000000000060 CR3: 0000000079d7e000 CR4: 00000000001407e0
[  209.689580] Stack:
[  209.689594]  0000000000001000 ffff880146083980 ffff880146083980 0000000000000000
[  209.689649]  ffff880146083980 0000000000000001 ffff88007d9d3f00 ffffffff811d0744
[  209.689702]  0000000000000046 00007fff7949fe20 ffff880036a034b8 0000000000000080
[  209.689756] Call Trace:
[  209.689778]  [<ffffffff811d0744>] seq_read+0x164/0x3e0
[  209.689816]  [<ffffffff811ab165>] vfs_read+0x95/0x160
[  209.689851]  [<ffffffff811abc79>] SyS_read+0x49/0xa0
[  209.689888]  [<ffffffff810ef64c>] ? __audit_syscall_entry+0x9c/0xf0
[  209.689933]  [<ffffffff81659412>] system_call_fastpath+0x16/0x1b

Testcase: igt/pm_pc8 (do a full run, it will fail at the debugfs-read subtest)
Signed-off-by: NPaulo Zanoni <paulo.r.zanoni@intel.com>
[danvet: Flip around NULL check for robustness.]
Signed-off-by: NDaniel Vetter <daniel.vetter@ffwll.ch>

Can be expanded up on to include all sorts of things (HDMI infoframe
data, more DP status, etc).  Should be useful for bug reports to get a
baseline on the display config and info.

v2: use seq_putc (Rodrigo)
    describe mode field names (Rodrigo)
Reviewed-by: NRodrigo Vivi <rodrigo.vivi@gmail.com>
Signed-off-by: NJesse Barnes <jbarnes@virtuousgeek.org>
Signed-off-by: NDaniel Vetter <daniel.vetter@ffwll.ch>

A check of rps/rc6 state after i915_reset determined that the ring
MAX_IDLE registers were returned to their hardware defaults and that
the GEN6_PMIMR register was set to mask all interrupts. This change
restores those values to their pre-reset states by re-initializing
rps/rc6 in i915_reset. A full re-initialization was opted for versus
a targeted set of restore operations for simplicity and maintain-
ability. Note that the re-initialization is not done for Ironlake,
due to a past comment that it causes problems.

Also updated the rps initialization sequence to preserve existing
min/max values in the case of a re-init. We assume the values were
validated upon being set and do not do further range checking. The
debugfs interface for changing min/max was updated with range
checking to ensure this condition (already present in sysfs
interface).

v2: fix rps logging to output hw_max and hw_min, not rps.max_delay
    and rps.min_delay which don't strictly represent hardware limits.
    Add igt testcase to signed-off-by section.

Testcase: igt/pm_rps/reset
Signed-off-by: NJeff McGee <jeff.mcgee@intel.com>
Signed-off-by: NDaniel Vetter <daniel.vetter@ffwll.ch>

Add a few new debugfs files which allow changing the watermark memory
latency values during runtime. This can be used to determine the if the
original BIOS provided latency values are no good.

v2: Drop superfluous plane name from output
    Take modeset locks around the latency value read/write
Signed-off-by: NVille Syrjälä <ville.syrjala@linux.intel.com>
Reviewed-by: NDamien Lespiau <damien.lespiau@intel.com>
Signed-off-by: NDaniel Vetter <daniel.vetter@ffwll.ch>

This debugfs interface will allow intel-gpu-tools test case
to verify if screen has been updated properly on cases like PSR.

v2: Accepted all Daniel's suggestions:
    * grab modeset lock
    * loop over connector and check DPMS on
    * return errors
    * use _eDP1 suffix for easy future extension
    * don't cache crc_supported neither latest crc
    * return crc as a full array and read it at once with aux.
    * use 0 to turn TEST_SINK off.
    * split the drm_helpers definitions in another patch.

v3: Accepted 2 Damien's suggestion: remove h from printf hexa
    and return ENODEV when eDP not present instead of EAGAIN.

v4: Accepted 2 Jani' s suggestion: 1 path for unlock and remove
    _retry from aux read.

v5: removing last missing useless _retry (by Damien)

Cc: Daniel Vetter <daniel.vetter@ffwll.ch>
Cc: Damien Lespiau <damien.lespiau@intel.com>
Cc: Jani Nikula <jani.nikula@intel.com>
Signed-off-by: NRodrigo Vivi <rodrigo.vivi@gmail.com>
Reviewed-by: NDamien Lespiau <damien.lespiau@intel.com>
Signed-off-by: NDaniel Vetter <daniel.vetter@ffwll.ch>

Not sure anyone cares about this information. I suppose most people
would just look at /proc/interrupts instead.
Signed-off-by: NVille Syrjälä <ville.syrjala@linux.intel.com>
Acked-by: NChris Wilson <chris@chris-wilson.co.uk>
Signed-off-by: NDaniel Vetter <daniel.vetter@ffwll.ch>

Many of the fields from Gen6 have gone away for vlv. Strip all those
fields that are not relevent and try to update fields that we care
about. This patch give information about current RP & RC status and
individual Wells.

v2: Move Render & Media Well status to separate lines (Ville)
Signed-off-by: NDeepak S <deepak.s@intel.com>
Reviewed-by: NVille Syrjälä <ville.syrjala@linux.intel.com>
Signed-off-by: NDaniel Vetter <daniel.vetter@ffwll.ch>

My OCD just couldn't let this slide. Spotted while reviewing Ville's
patch to only flip planes when we have FBC.

Cc: Ville Syrjälä <ville.syrjala@linux.intel.com>
Reviewed-by: NVille Syrjälä <ville.syrjala@linux.intel.com>
Signed-off-by: NDaniel Vetter <daniel.vetter@ffwll.ch>

According to Art, we don't have a way to read back the state reliably at
runtime, through the control reg or the mailbox, at least not without risking
disabling it again.  So drop the readout and checking on BDW.

v2: drop TODO comment (Paulo)
    move POSTING_READ of control reg under HSW branch in disable (Paulo)
    always report IPS as enabled on BDW (Paulo)

References: https://bugs.freedesktop.org/show_bug.cgi?id=71906Signed-off-by: NJesse Barnes <jbarnes@virtuousgeek.org>
Reviewed-by: NPaulo Zanoni <paulo.r.zanoni@intel.com>
Signed-off-by: NDaniel Vetter <daniel.vetter@ffwll.ch>

Since get_pid_task() grabs a reference on the task_struct, we have to drop the
refcount after reading that task's comm name. Use pid_task() with RCU instead.

Also, avoid directly reading like pid_task()->comm because
pid_task() will return NULL if the task have already exit()ed.

This patch fixes both problems.
Signed-off-by: NTetsuo Handa <penguin-kernel@I-love.SAKURA.ne.jp>
Signed-off-by: NDaniel Vetter <daniel.vetter@ffwll.ch>

Signed-off-by: NBen Widawsky <ben@bwidawsk.net>
Signed-off-by: NDaniel Vetter <daniel.vetter@ffwll.ch>

Dump the aliasing PPGTT with it. The aliasing PPGTT should actually
always be empty.

TODO: Broadwell. Since we don't yet use full PPGTT on Broadwell, not
having the dumper is okay.
Signed-off-by: NBen Widawsky <ben@bwidawsk.net>
Signed-off-by: NDaniel Vetter <daniel.vetter@ffwll.ch>

Signed-off-by: NBen Widawsky <ben@bwidawsk.net>
Signed-off-by: NDaniel Vetter <daniel.vetter@ffwll.ch>

The whole file is wrapped around in #if defined(CONFIG_DEBUG_FS) anyway,
so skip the file at the build level already.
Signed-off-by: NJani Nikula <jani.nikula@intel.com>
Signed-off-by: NDaniel Vetter <daniel.vetter@ffwll.ch>

In case of error, the function debugfs_create_file() returns NULL
pointer not ERR_PTR() if debugfs is enabled. The IS_ERR() test in
the return value check should be replaced with NULL test.
Signed-off-by: NWei Yongjun <yongjun_wei@trendmicro.com.cn>
Signed-off-by: NDaniel Vetter <daniel.vetter@ffwll.ch>

These are needed when we cat the debugfs and sysfs files.

V2: - Rebase
V3: - Rebase
V4: - Rebase
Signed-off-by: NPaulo Zanoni <paulo.r.zanoni@intel.com>
Reviewed-by: NRodrigo Vivi <rodrigo.vivi@gmail.com>
Signed-off-by: NDaniel Vetter <daniel.vetter@ffwll.ch>

Forcewake counts for valleyview are not exposed throgh DebugFS.
Exposing with this change.
Signed-off-by: NDeepak S <deepak.s@intel.com>
Reviewed-by: NJesse Barnes <jbarnes@virtuousgeek.org>
Signed-off-by: NDaniel Vetter <daniel.vetter@ffwll.ch>

Added power well arguments to all the force wake routines
to help us individually control power well based on the
scenario.
Signed-off-by: NDeepak S <deepak.s@intel.com>
Reviewed-by: NJesse Barnes <jbarnes@virtuousgeek.org>
[danvet: Resolve conflict with the removed forcewake hack and drop one
spurious hunk Jesse noticed.]
Signed-off-by: NDaniel Vetter <daniel.vetter@ffwll.ch>

Add a debugfs entry showing the use-count for all power domains of each
power well.

v3: address comments from Paulo:
- simplify power_domain_str() by using a switch table
- move power_well::domain_count to power_domains
- WARN_ON decrementing a 0 refcount
Signed-off-by: NImre Deak <imre.deak@intel.com>
Reviewed-by: NPaulo Zanoni <paulo.zanoni@intel.com>
Signed-off-by: NDaniel Vetter <daniel.vetter@ffwll.ch>

Many tests call this ad naseum now (in an infinite loop, very often).
It clutters the logs. Actually, I'd rather drop it completely...

Cc: Daniel Vetter <daniel.vetter@ffwll.ch>
Cc: Chris Wilson <chris@chris-wilson.co.uk>
Signed-off-by: NBen Widawsky <ben@bwidawsk.net>
Acked-by: NChris Wilson <chris@chris-wilson.co.uk>
Signed-off-by: NDaniel Vetter <daniel.vetter@ffwll.ch>

gcc complains that:

drivers/gpu/drm/i915/i915_debugfs.c: In function ‘display_crc_ctl_write’:
drivers/gpu/drm/i915/i915_debugfs.c:2393:2: warning: ‘val’ may be used uninitialized in this function [-Wuninitialized]
drivers/gpu/drm/i915/i915_debugfs.c:2350:6: note: ‘val’ was declared here

but it can't see that we're going to use val only in the success case.
So shut it up.

Cc: Daniel Vetter <daniel.vetter@ffwll.ch>
Cc: David Airlie <airlied@linux.ie>
Cc: intel-gfx@lists.freedesktop.org
Cc: dri-devel@lists.freedesktop.org
Signed-off-by: NBorislav Petkov <bp@suse.de>
Signed-off-by: NDaniel Vetter <daniel.vetter@ffwll.ch>

We don't init the lock nor set up all the other state. And it doesn't
make sense anyway.

This appeases lockdep when running the igt/drv_debugfs_reader test.
Reviewed-by: NDamien Lespiau <damien.lespiau@intel.com>
Signed-off-by: NDaniel Vetter <daniel.vetter@ffwll.ch>

We have a nice macro, so use it.
Reviewed-by: NDamien Lespiau <damien.lespiau@intel.com>
Signed-off-by: NDaniel Vetter <daniel.vetter@ffwll.ch>

It's not so much that the information is terribly useful, but rather
that the gen6/7 information is completely useless.
Signed-off-by: NBen Widawsky <ben@bwidawsk.net>
Signed-off-by: NDaniel Vetter <daniel.vetter@ffwll.ch>

All the gen8 debugfs stuff I wasn't too lazy to update. We'll need more
later, I am certain.

v2: Fix up the register name in the debugfs output as suggested by
Paulo.

Signed-off-by: Ben Widawsky <ben@bwidawsk.net> (v1)
Reviewed-by: NPaulo Zanoni <przanoni@gmail.com>
Signed-off-by: NDaniel Vetter <daniel.vetter@ffwll.ch>

v2: Add missed ring interrupt info
Signed-off-by: NBen Widawsky <ben@bwidawsk.net>
Signed-off-by: NDaniel Vetter <daniel.vetter@ffwll.ch>

Some VLV PHY/PLL DPIO registers have group/lane/channel access.  Current
DPIO register definition doesn't have a structure way to break them
down. As a result it is not easy to match the PHY/PLL registers with the
configdb document.  Rename those registers based on the configdb for easy
cross references, and without the need to check the offset in the header
file.

New format is as following.

<platform name>_<DPIO component><optional lane #>_DW<dword # in the
doc>_<optional channel #>

For example,

VLV_PCS_DW0 - Group access to PCS for lane 0 to 3 for PCS DWORD 0.
VLV_PCS01_DW0_CH0 - PCS access to lane 0/1, channel 0 for PCS DWORD 0.

Another example is

VLV_TX_DW0 - Group access to TX lane 0 to 3 for TX DWORD 0
VLV_TX0_DW0 - Refer to TX Lane 0 access only for TX DWORD 0.

There is no functional change on this patch.

v2: Rebase based on previous patch change.
v3: There may be configdb different version that document the start DW
differently. Add a comment to clarify.  Fix up some mismatch start DW
for second PLL block. (Ville)
Suggested-by: NVille Syrjälä <ville.syrjala@linux.intel.com>
Signed-off-by: NChon Ming Lee <chon.ming.lee@intel.com>
Reviewed-by: NVille Syrjälä <ville.syrjala@linux.intel.com>
Signed-off-by: NDaniel Vetter <daniel.vetter@ffwll.ch>

The RPS register writing routines use the current value of min/max to
set certain limits and interrupt gating. If we set those afterwards, we
risk setting up the hw incorrectly and losing power management events,
and worse, trigger some internal assertions.

Reorder the calling sequences to be correct, and remove the then
unrequired clamping from inside set_rps(). And for a bonus, fix the bug
of calling gen6_set_rps() from Valleyview.
Signed-off-by: NChris Wilson <chris@chris-wilson.co.uk>
Signed-off-by: NRodrigo Vivi <rodrigo.vivi@gmail.com>
Reviewed-by: NVille Syrjälä <ville.syrjala@linux.intel.com>
CC: Ville Syrjälä <ville.syrjala@linux.intel.com>
Signed-off-by: NDaniel Vetter <daniel.vetter@ffwll.ch>

The max frequency reporting is not correct.  But there is already an existing
valleyview_rps_max_freq and valleyview_rps_min_freq to get the
frequency.  Use that for i915_cur_delayinfo.
Signed-off-by: NChon Ming Lee <chon.ming.lee@intel.com>
Reviewed-by: NJesse Barnes <jbarnes@virtuousgeek.org>
Signed-off-by: NDaniel Vetter <daniel.vetter@ffwll.ch>

We'll be looking at more than just mem_freq from dev_priv, so
just pass the whole thing.
Signed-off-by: NVille Syrjälä <ville.syrjala@linux.intel.com>
Reviewed-by: NJesse Barnes <jbarnes@virtuousgeek.org>
Signed-off-by: NDaniel Vetter <daniel.vetter@ffwll.ch>

Signed-off-by: NDamien Lespiau <damien.lespiau@intel.com>
Reviewed-by: NVille Syrjälä <ville.syrjala@linux.intel.com>
Signed-off-by: NDave Airlie <airlied@redhat.com>

Now that DP port CRCs are stable, we can use it for generic CRC tests.
Yay, the auto CRC source should now work everywhere!
Reviewed-by: NDamien Lespiau <damien.lespiau@intel.com>
Signed-off-by: NDaniel Vetter <daniel.vetter@ffwll.ch>

They've moved the DC balance reset bit around. Again I don't think we
need it, but better safe than sorry and maybe HDMI port CRC will prove
useful for checking infoframes or hdmi audio.

v2: Apply the suggestions from Damien's review.
Reviewed-by: NDamien Lespiau <damien.lespiau@intel.com>
Signed-off-by: NDaniel Vetter <daniel.vetter@ffwll.ch>

We need to reset the DP scrambler on every vsync to get stable CRCs.
And since we can't use the normal pipe CRC on DP ports on g4x we
really need them to be able to test modesetting issues on (e)DP
outputs.

Note that the DC balance reset is for SDVO port CRCs so we don't
strictly need it. But better safe than sorry (and it's a nice template
in case we ever want to grab port CRCs for e.g. audio checking).

v2: Apply the suggestions from Damien's review.
Reviewed-by: NDamien Lespiau <damien.lespiau@intel.com>
Signed-off-by: NDaniel Vetter <daniel.vetter@ffwll.ch>

On gmch platforms the normal pipe source CRC registers don't work for
DP and TV encoders. And on newer platforms the single pipe CRC has
been replaced by a set of CRC at different stages in the platform.

Now most of our userspace tests don't care one bit about the exact
CRC, they simply want something that reflects any changes on the
screen. Hence add a new auto target for platform agnostic tests to
use.

v2: Pass back the adjusted source so that it can be shown in debugfs.

v3: I seem to be unable to get a stable CRC for DP ports. So let's
just disable them for now when using the auto mode. Note that
testcases need to be restructured so that they can dynamically skip
connectors. They also first need to set up the desired mode
configuration, since otherwise the auto mode won't do the right thing.

v4: Don't leak the modeset mutex on error paths.

v5: Spelling fix for the i9xx auto_source function.

Cc: Damien Lespiau <damien.lespiau@intel.com>
Reviewed-by: NDamien Lespiau <damien.lespiau@intel.com>
Signed-off-by: NDaniel Vetter <daniel.vetter@ffwll.ch>

Daniel pointed out that it was hard to get anything lockless to work
correctly, so don't even try for this non critical piece of code and
just use a spin lock.

v2: Make intel_pipe_crc->opened a bool
v3: Use assert_spin_locked() instead of a comment (Daniel Vetter)
v4: Use spin_lock_irq() in the debugfs functions (they can only be
    called from process context),
    Use spin_lock() in the pipe_crc_update() function that can only be
    called from an interrupt handler,
    Use wait_event_interruptible_lock_irq() when waiting for data in the
    cicular buffer to ensure proper locking around the condition we are
    waiting for. (Daniel Vetter)
Suggested-by: NDaniel Vetter <daniel.vetter@ffwll.ch>
Signed-off-by: NDamien Lespiau <damien.lespiau@intel.com>
Signed-off-by: NDaniel Vetter <daniel.vetter@ffwll.ch>

v2: Actually enable it.
Reviewed-by: NVille Syrjälä <ville.syrjala@linux.intel.com>
Signed-off-by: NDaniel Vetter <daniel.vetter@ffwll.ch>