- 31 8月, 2011 1 次提交
-
-
由 J. Bruce Fields 提交于
We don't need this any more. Signed-off-by: NJ. Bruce Fields <bfields@redhat.com>
-
- 28 8月, 2011 13 次提交
-
-
由 J. Bruce Fields 提交于
When called with OPEN_STATE, preprocess_seqid_op only returns an open stateid, hence only an open owner. Signed-off-by: NJ. Bruce Fields <bfields@redhat.com>
-
由 J. Bruce Fields 提交于
We've got some lock-specific code here in nfs4_preprocess_seqid_op which is only used by nfsd4_lock(). Move it to the caller. Signed-off-by: NJ. Bruce Fields <bfields@redhat.com>
-
由 J. Bruce Fields 提交于
Note that the special handling for the lock stateid case is already done by nfs4_check_openmode() (as of 02921914 "nfsd4: fix openmode checking on IO using lock stateid") so we no longer need these two cases in the caller. Signed-off-by: NJ. Bruce Fields <bfields@redhat.com>
-
由 J. Bruce Fields 提交于
Signed-off-by: NJ. Bruce Fields <bfields@redhat.com>
-
由 J. Bruce Fields 提交于
This flag doesn't really buy us anything. Signed-off-by: NJ. Bruce Fields <bfields@redhat.com>
-
由 J. Bruce Fields 提交于
Share some common code, stop doing silly things like initializing a list head immediately before adding it to a list, etc. Signed-off-by: NJ. Bruce Fields <bfields@redhat.com>
-
由 J. Bruce Fields 提交于
These appear to be generic (for both open and lock owners), but they're actually just for open owners. This has confused me more than once. Signed-off-by: NJ. Bruce Fields <bfields@redhat.com>
-
由 J. Bruce Fields 提交于
For all the usual reasons. (Type safety, readability.) Signed-off-by: NJ. Bruce Fields <bfields@redhat.com>
-
由 J. Bruce Fields 提交于
The server is returning nfserr_resource for both permanent errors and for errors (like allocation failures) that might be resolved by retrying later. Save nfserr_resource for the former and use delay/jukebox for the latter. Cc: stable@kernel.org Signed-off-by: NJ. Bruce Fields <bfields@redhat.com>
-
由 Boaz Harrosh 提交于
Even if we fail to write a recovery record, we should still mark the client as having acquired its first state. Otherwise we leave 4.1 clients with indefinite ERR_GRACE returns. However, an inability to write stable storage records may cause failures of reboot recovery, and the problem should still be brought to the server administrator's attention. So, make sure the error is logged. These errors shouldn't normally be triggered on a corectly functioning server--this isn't a case where a misconfigured client could spam the logs. Signed-off-by: NBoaz Harrosh <bharrosh@panasas.com> Signed-off-by: NJ. Bruce Fields <bfields@redhat.com>
-
由 J. Bruce Fields 提交于
Move around some of this code, simplify a bit. Reviewed-by: NBoaz Harrosh <bharrosh@panasas.com> Signed-off-by: NJ. Bruce Fields <bfields@redhat.com>
-
由 J. Bruce Fields 提交于
Acked-by: NJim Rees <rees@umich.edu> Signed-off-by: NJ. Bruce Fields <bfields@redhat.com>
-
由 J. Bruce Fields 提交于
A client that wants to execute a file must be able to read it. Read opens over nfs are therefore implicitly allowed for executable files even when those files are not readable. NFSv2/v3 get this right by using a passed-in NFSD_MAY_OWNER_OVERRIDE on read requests, but NFSv4 has gotten this wrong ever since dc730e17 "nfsd4: fix owner-override on open", when we realized that the file owner shouldn't override permissions on non-reclaim NFSv4 opens. So we can't use NFSD_MAY_OWNER_OVERRIDE to tell nfsd_permission to allow reads of executable files. So, do the same thing we do whenever we encounter another weird NFS permission nit: define yet another NFSD_MAY_* flag. The industry's future standardization on 128-bit processors will be motivated primarily by the need for integers with enough bits for all the NFSD_MAY_* flags. Reported-by: NLeonardo Borda <leonardoborda@gmail.com> Cc: stable@kernel.org Signed-off-by: NJ. Bruce Fields <bfields@redhat.com>
-
- 27 8月, 2011 7 次提交
-
-
由 J. Bruce Fields 提交于
Userspace shouldn't have a use for these constants. Nothing here is used outside fs/nfsd. Signed-off-by: NJ. Bruce Fields <bfields@redhat.com>
-
由 J. Bruce Fields 提交于
At least one of these is actually wrong anyway. Signed-off-by: NJ. Bruce Fields <bfields@redhat.com>
-
由 J. Bruce Fields 提交于
The nfsd4 code has a bunch of special exceptions for error returns which map nfserr_symlink to other errors. In fact, the spec makes it clear that nfserr_symlink is to be preferred over less specific errors where possible. The patch that introduced it back in 2.6.4 is "kNFSd: correct symlink related error returns.", which claims that these special exceptions are represent an NFSv4 break from v2/v3 tradition--when in fact the symlink error was introduced with v4. I suspect what happened was pynfs tests were written that were overly faithful to the (known-incomplete) rfc3530 error return lists, and then code was fixed up mindlessly to make the tests pass. Delete these unnecessary exceptions. Signed-off-by: NJ. Bruce Fields <bfields@redhat.com>
-
由 J. Bruce Fields 提交于
Zero means "I don't care what kind of file this is". And that's probably what we want--acls are also settable at least on directories, and if the filesystem doesn't want them on other objects, leave it to it to complain. Signed-off-by: NJ. Bruce Fields <bfields@redhat.com>
-
由 J. Bruce Fields 提交于
Add some more comments, simplify logic, do & S_IFMT just once, name "type" more helpfully. Signed-off-by: NJ. Bruce Fields <bfields@redhat.com>
-
由 J. Bruce Fields 提交于
We allow the fh_verify caller to specify that any object *except* those of a given type is allowed, by passing a negative type. But only one caller actually uses it. Open-code that check in the one caller. Signed-off-by: NJ. Bruce Fields <bfields@redhat.com>
-
由 J. Bruce Fields 提交于
A slightly unconventional approach to make the code more compact I could live with, but let's give the poor reader *some* chance. Signed-off-by: NJ. Bruce Fields <bfields@redhat.com>
-
- 20 8月, 2011 7 次提交
-
-
由 Eric Dumazet 提交于
Use NUMA aware allocations to reduce latencies and increase throughput. sunrpc kthreads can use kthread_create_on_node() if pool_mode is "percpu" or "pernode", and svc_prepare_thread()/svc_init_buffer() can also take into account NUMA node affinity for memory allocations. Signed-off-by: NEric Dumazet <eric.dumazet@gmail.com> CC: "J. Bruce Fields" <bfields@fieldses.org> CC: Neil Brown <neilb@suse.de> CC: David Miller <davem@davemloft.net> Reviewed-by: NGreg Banks <gnb@fastmail.fm> [bfields@redhat.com: fix up caller nfs41_callback_up] Signed-off-by: NJ. Bruce Fields <bfields@redhat.com>
-
由 J. Bruce Fields 提交于
There's an incorrect comment here. Also clean up the logic: the "rdlease" and "wrlease" locals are confusingly named, and don't really add anything since we can make a decision as soon as we hit one of these cases. Signed-off-by: NJ. Bruce Fields <bfields@redhat.com>
-
由 J. Bruce Fields 提交于
We currently use a bit in fl_flags to record whether a lease is being broken, and set fl_type to the type (RDLCK or UNLCK) that it will eventually have. This means that once the lease break starts, we forget what the lease's type *used* to be. Breaking a read lease will then result in blocking read opens, even though there's no conflict--because the lease type is now F_UNLCK and we can no longer tell whether it was previously a read or write lease. So, instead keep fl_type as the original type (the type which we enforce), and keep track of whether we're unlocking or merely downgrading by replacing the single FL_INPROGRESS flag by FL_UNLOCK_PENDING and FL_DOWNGRADE_PENDING flags. To get this right we also need to track separate downgrade and break times, to handle the case where a write-leased file gets conflicting opens first for read, then later for write. (I first considered just eliminating the downgrade behavior completely--nfsv4 doesn't need it, and nobody as far as I can tell actually uses it currently--but Jeremy Allison tells me that Windows oplocks do behave this way, so Samba will probably use this some day.) Reviewed-by: NJeff Layton <jlayton@redhat.com> Signed-off-by: NJ. Bruce Fields <bfields@redhat.com>
-
由 J. Bruce Fields 提交于
F_INPROGRESS isn't exposed to userspace. To me it makes more sense in fl_flags.... Reviewed-by: NJeff Layton <jlayton@redhat.com> Signed-off-by: NJ. Bruce Fields <bfields@redhat.com>
-
由 J. Bruce Fields 提交于
Use a helper function, to simplify upcoming changes. Reviewed-by: NJeff Layton <jlayton@redhat.com> Signed-off-by: NJ. Bruce Fields <bfields@redhat.com>
-
由 J. Bruce Fields 提交于
Without this, an attempt to open a device special file without first stat'ing it will fail. Signed-off-by: NJ. Bruce Fields <bfields@redhat.com>
-
由 J. Bruce Fields 提交于
The set of errors here does *not* agree with the set of errors specified in the rfc! While we're there, turn this macros into a function, for the usual reasons, and move it to the one place where it's actually used. Cc: stable@kernel.org Signed-off-by: NJ. Bruce Fields <bfields@redhat.com>
-
- 17 8月, 2011 1 次提交
-
-
由 Bernd Schubert 提交于
Fan Yong <yong.fan@whamcloud.com> noticed setting FMODE_32bithash wouldn't work with nfsd v4, as nfsd4_readdir() checks for 32 bit cookies. However, according to RFC 3530 cookies have a 64 bit type and cookies are also defined as u64 in 'struct nfsd4_readdir'. So remove the test for >32-bit values. Cc: stable@kernel.org Signed-off-by: NBernd Schubert <bernd.schubert@itwm.fraunhofer.de> Signed-off-by: NJ. Bruce Fields <bfields@redhat.com>
-
- 08 8月, 2011 7 次提交
-
-
由 Linus Torvalds 提交于
-
git://git.kernel.org/pub/scm/linux/kernel/git/davem/sparc由 Linus Torvalds 提交于
* git://git.kernel.org/pub/scm/linux/kernel/git/davem/sparc: sparc: Fix build with DEBUG_PAGEALLOC enabled.
-
由 Rafael J. Wysocki 提交于
Commit d006199e72a9 ("serial: sh-sci: Regtype probing doesn't need to be fatal.") made sci_init_single() return when sci_probe_regmap() succeeds, although it should return when sci_probe_regmap() fails. This causes systems using the serial sh-sci driver to crash during boot. Fix the problem by using the right return condition. Signed-off-by: NRafael J. Wysocki <rjw@sisk.pl> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
由 Linus Torvalds 提交于
The generic library code already exports the generic function, this was left-over from the ARM-specific version that just got removed. Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
由 Linus Torvalds 提交于
Since commit 1eb19a12 ("lib/sha1: use the git implementation of SHA-1"), the ARM SHA1 routines no longer work. The reason? They depended on the larger 320-byte workspace, and now the sha1 workspace is just 16 words (64 bytes). So the assembly version would overwrite the stack randomly. The optimized asm version is also probably slower than the new improved C version, so there's no reason to keep it around. At least that was the case in git, where what appears to be the same assembly language version was removed two years ago because the optimized C BLK_SHA1 code was faster. Reported-and-tested-by: NJoachim Eastwood <manabian@gmail.com> Cc: Andreas Schwab <schwab@linux-m68k.org> Cc: Nicolas Pitre <nico@fluxnic.net> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
由 Al Viro 提交于
task->cred is declared as __rcu, and access to other tasks' ->cred is, indeed, protected. Access to current->cred does not need rcu_dereference() at all, since only the task itself can change its ->cred. sparse, of course, has no way of knowing that... Add force-cast in current_cred(), make current_fsuid() et.al. use it. Signed-off-by: NAl Viro <viro@zeniv.linux.org.uk> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
由 Linus Torvalds 提交于
Al points out that the do_follow_link() helper function really is misnamed - it's about whether we should try to follow a symlink or not, not about actually doing the following. Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
- 07 8月, 2011 4 次提交
-
-
由 Ari Savolainen 提交于
After commit 3567866b: "RCUify freeing acls, let check_acl() go ahead in RCU mode if acl is cached" posix_acl_permission is being called with an unsupported flag and the permission check fails. This patch fixes the issue. Signed-off-by: NAri Savolainen <ari.m.savolainen@gmail.com> Signed-off-by: NAl Viro <viro@zeniv.linux.org.uk>
-
git://git.open-osd.org/linux-open-osd由 Linus Torvalds 提交于
* 'for-linus' of git://git.open-osd.org/linux-open-osd: ore: Make ore its own module exofs: Rename raid engine from exofs/ios.c => ore exofs: ios: Move to a per inode components & device-table exofs: Move exofs specific osd operations out of ios.c exofs: Add offset/length to exofs_get_io_state exofs: Fix truncate for the raid-groups case exofs: Small cleanup of exofs_fill_super exofs: BUG: Avoid sbi realloc exofs: Remove pnfs-osd private definitions nfs_xdr: Move nfs4_string definition out of #ifdef CONFIG_NFS_V4
-
由 Linus Torvalds 提交于
The inode structure layout is largely random, and some of the vfs paths really do care. The path lookup in particular is already quite D$ intensive, and profiles show that accessing the 'inode->i_op->xyz' fields is quite costly. We already optimized the dcache to not unnecessarily load the d_op structure for members that are often NULL using the DCACHE_OP_xyz bits in dentry->d_flags, and this does something very similar for the inode ops that are used during pathname lookup. It also re-orders the fields so that the fields accessed by 'stat' are together at the beginning of the inode structure, and roughly in the order accessed. The effect of this seems to be in the 1-2% range for an empty kernel "make -j" run (which is fairly kernel-intensive, mostly in filename lookup), so it's visible. The numbers are fairly noisy, though, and likely depend a lot on exact microarchitecture. So there's more tuning to be done. Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
由 Linus Torvalds 提交于
Gcc tends to generate better code with small integers, including the DCACHE_xyz flag tests - so move the common ones to be first in the list. Also just remove the unused DCACHE_INOTIFY_PARENT_WATCHED and DCACHE_AUTOFS_PENDING values, their users no longer exists in the source tree. And add a "unlikely()" to the DCACHE_OP_COMPARE test, since we want the common case to be a nice straight-line fall-through. Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-