Add max MAD size to the device immutable data set and have all drivers that
support MADs report the current IB MAD size (IB_MGMT_MAD_SIZE) to the core.

Verify MAD size data in both the MAD core and when reading the immutable data.

OPA drivers will report alternate MAD sizes in subsequent patches.
Signed-off-by: NIra Weiny <ira.weiny@intel.com>
Signed-off-by: NDoug Ledford <dledford@redhat.com>

Vendors should be able to pass vendor specific data to/from
user-space via query_device uverb. In order to do this,
we need to pass the vendors' specific udata.
Signed-off-by: NMatan Barak <matanb@mellanox.com>
Signed-off-by: NOr Gerlitz <ogerlitz@mellanox.com>
Signed-off-by: NDoug Ledford <dledford@redhat.com>

Currently, ib_create_cq uses cqe and comp_vecotr instead
of the extendible ib_cq_init_attr struct.

Earlier patches already changed the vendors to work with
ib_cq_init_attr. This patch changes the consumers too.
Signed-off-by: NMatan Barak <matanb@mellanox.com>
Signed-off-by: NOr Gerlitz <ogerlitz@mellanox.com>
Signed-off-by: NDoug Ledford <dledford@redhat.com>

Add a new ib_cq_init_attr structure which contains the
previous cqe (minimum number of CQ entries) and comp_vector
(completion vector) in addition to a new flags field.
All vendors' create_cq callbacks are changed in order
to work with the new API.

This commit does not change any functionality.
Signed-off-by: NMatan Barak <matanb@mellanox.com>
Signed-off-by: NOr Gerlitz <ogerlitz@mellanox.com>
Reviewed-By: Devesh Sharma <devesh.sharma@avagotech.com> to patch #2
Signed-off-by: NDoug Ledford <dledford@redhat.com>

Previously we configured HW MTU to be netdev->mtu, actually we
need to configure netdev->mtu + (ETH_HLEN + VLAN_HLEN + ETH_FCS_LEN).

Also, query MTU can not fail, hence make the relevant helper a
void functionm, add mlx5e_set_dev_port_mtu, helper function to
handle MTU setting.
Signed-off-by: NSaeed Mahameed <saeedm@mellanox.com>
Signed-off-by: NOr Gerlitz <ogerlitz@mellanox.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Ethernet functionality is only available when working in ISSI > 0 mode.

Previously, the IB driver wasn't ready to work on that mode, and hence
building both the IB driver and the Ethernet functionality in the core
driver were disallowed by Kconfigs.

Now, once we have all the pre-steps in place, we can remove this limitation.

The last steps in the IB driver for getting that setup to work are:
create dummy SRQ for the driver's use (until now we could use XRC_SRQ
as SRQ and XRC_SRQ, after moving to ISSI > 0, we separate XRC SRQs from
basic SRQs) and adapt the create QP function to be compatible with ISSI > 0.
Signed-off-by: NHaggai Abramovsky <hagaya@mellanox.com>
Signed-off-by: NOr Gerlitz <ogerlitz@mellanox.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Since we still don't have RoCE support in mlx5, avoid
creating IB driver instance over Ethernet ports.
Signed-off-by: NMajd Dibbiny <majd@mellanox.com>
Signed-off-by: NOr Gerlitz <ogerlitz@mellanox.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

In ISSI > 0 mode, most of the MAD_IFC command features are deprecated, and can't
be used. Therefore, when in that mode, we replace all of them with other commands
that provide the required functionality.
Signed-off-by: NMajd Dibbiny <majd@mellanox.com>
Signed-off-by: NOr Gerlitz <ogerlitz@mellanox.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

- Query all supported types of dev caps on driver load.
- Store the Cap data outbox per cap type into driver private data.
- Introduce new Macros to access/dump stored caps (using the auto
  generated data types).
- Obsolete SW representation of dev caps (no need for SW copy for each
  cap).
- Modify IB driver to use new macros for checking caps.
Signed-off-by: NSaeed Mahameed <saeedm@mellanox.com>
Signed-off-by: NAmir Vadai <amirv@mellanox.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Remove query_protocol callback

Use the new Core Capability bits for:

rdma_protocol_*
rdma_cap_ib_mad
rdma_cap_ib_smi
rdma_cap_ib_cm
rdma_cap_iw_cm
rdma_cap_ib_sa
rdma_cap_ib_mcast
rdma_cap_af_ib
rdma_cap_eth_ah
Signed-off-by: NIra Weiny <ira.weiny@intel.com>
Signed-off-by: NDoug Ledford <dledford@redhat.com>

As of commit 5eb620c8 "IB/core: Add helpers for uncached GID and P_Key
searches"; pkey_tbl_len and gid_tbl_len are immutable data which are stored in
the ib_device.

The per port core capability flags to be added later are also immutable data to
be stored in the ib_device object.

In preparation for this create a structure for per port immutable data and
place the pkey and gid table lengths within this structure.

"get_port_immutable" is added as a mandatory device function to allow the
drivers to fill in this data.
Signed-off-by: NIra Weiny <ira.weiny@intel.com>
Signed-off-by: NDoug Ledford <dledford@redhat.com>

Add new callback query_protocol() and implement for each HW.

Mapping List:
		node-type	link-layer	transport	protocol
nes		RNIC		ETH		IWARP		IWARP
amso1100	RNIC		ETH		IWARP		IWARP
cxgb3   	RNIC		ETH		IWARP		IWARP
cxgb4   	RNIC		ETH		IWARP		IWARP
usnic   	USNIC_UDP	ETH		USNIC_UDP	USNIC_UDP
ocrdma  	IB_CA		ETH		IB		IBOE
mlx4    	IB_CA		IB/ETH		IB		IB/IBOE
mlx5    	IB_CA		IB		IB		IB
ehca    	IB_CA		IB		IB		IB
ipath   	IB_CA		IB		IB		IB
mthca   	IB_CA		IB		IB		IB
qib     	IB_CA		IB		IB		IB
Signed-off-by: NMichael Wang <yun.wang@profitbricks.com>
Reviewed-by: NIra Weiny <ira.weiny@intel.com>
Tested-by: NIra Weiny <ira.weiny@intel.com>
Reviewed-by: NSean Hefty <sean.hefty@intel.com>
Reviewed-by: NJason Gunthorpe <jgunthorpe@obsidianresearch.com>
Tested-by: NDoug Ledford <dledford@redhat.com>
Signed-off-by: NDoug Ledford <dledford@redhat.com>

Preparation for ethernet driver.
Signed-off-by: NAchiad Shochat <achiad@mellanox.com>
Signed-off-by: NSaeed Mahameed <saeedm@mellanox.com>
Signed-off-by: NEli Cohen <eli@mellanox.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Preparation for ethernet driver.
These functions will be used in drivers other than mlx5_ib.
Signed-off-by: NAchiad Shochat <achiad@mellanox.com>
Signed-off-by: NSaeed Mahameed <saeedm@mellanox.com>
Signed-off-by: NEli Cohen <eli@mellanox.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Signed-off-by: NAchiad Shochat <achiad@mellanox.com>
Signed-off-by: NSaeed Mahameed <saeedm@mellanox.com>
Signed-off-by: NEli Cohen <eli@mellanox.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Re-enable the on-demand paging capability query through the
extended query device verb.
Signed-off-by: NHaggai Eran <haggaie@mellanox.com>
Reviewed-by: NYann Droneaud <ydroneaud@opteya.com>
Signed-off-by: NRoland Dreier <roland@purestorage.com>

The current code returns success when kmalloc() fails.  It should
return an error code, -ENOMEM.

Fixes: e126ba97 ("mlx5: Add driver for Mellanox Connect-IB adapters")
Signed-off-by: NDan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: NRoland Dreier <roland@purestorage.com>

While commit 7e36ef82 ("IB/core: Temporarily disable
ex_query_device uverb") is correct as it makes the extended
QUERY_DEVICE uverb (which came as part of commit 5a77abf9
("IB/core: Add support for extended query device caps") and commit
860f10a7 ("IB/core: Add flags for on demand paging support")) not
available to userspace, it doesn't address the initial issue regarding
ib_copy_to_udata() [1][2].

Additionally, further discussions around this new uverb seems to
conclude it would require a different data structure than the one
currently described in <rdma/ib_user_verbs.h> [3].

Both of these issues require a revert of the changes, so this patch
partially reverts commit 8cdd312c ("IB/mlx5: Implement the ODP
capability query verb") and commit 860f10a7 ("IB/core: Add flags
for on demand paging support") and fully reverts commit 5a77abf9
("IB/core: Add support for extended query device caps").

[1] "Re: [PATCH v3 06/17] IB/core: Add support for extended query device caps"
    http://mid.gmane.org/1418733236.2779.26.camel@opteya.com

[2] "Re: [PATCH] IB/core: Temporarily disable ex_query_device uverb"
    http://mid.gmane.org/1423067503.3030.83.camel@opteya.com

[3] "RE: [PATCH v1 1/5] IB/uverbs: ex_query_device: answer must not depend on request's comp_mask"
    http://mid.gmane.org/2807E5FD2F6FDA4886F6618EAC48510E0CC12C30@CRSMSX101.amr.corp.intel.com

Cc: Eli Cohen <eli@mellanox.com>
Cc: Haggai Eran <haggaie@mellanox.com>
Cc: Ira Weiny <ira.weiny@intel.com>
Cc: Jason Gunthorpe <jgunthorpe@obsidianresearch.com>
Cc: Sagi Grimberg <sagig@mellanox.com>
Cc: Shachar Raindel <raindel@mellanox.com>
Signed-off-by: NYann Droneaud <ydroneaud@opteya.com>
Signed-off-by: NRoland Dreier <roland@purestorage.com>

* Implement the relevant invalidation functions (zap MTTs as needed)
* Implement interlocking (and rollback in the page fault handlers) for
  cases of a racing notifier and fault.
* With this patch we can now enable the capability bits for supporting RC
  send/receive/RDMA read/RDMA write, and UD send.
Signed-off-by: NSagi Grimberg <sagig@mellanox.com>
Signed-off-by: NShachar Raindel <raindel@mellanox.com>
Signed-off-by: NHaggai Eran <haggaie@mellanox.com>
Signed-off-by: NRoland Dreier <roland@purestorage.com>

* Refactor MR registration and cleanup, and fix reg_pages accounting.
* Create a work queue to handle page fault events in a kthread context.
* Register a fault handler to get events from the core for each QP.

The registered fault handler is empty in this patch, and only a later
patch implements it.
Signed-off-by: NSagi Grimberg <sagig@mellanox.com>
Signed-off-by: NShachar Raindel <raindel@mellanox.com>
Signed-off-by: NHaggai Eran <haggaie@mellanox.com>
Signed-off-by: NRoland Dreier <roland@purestorage.com>

The patch adds infrastructure to query ODP capabilities in the mlx5
driver. The code will read the capabilities from the device, and
enable only those capabilities that both the driver and the device
supports.  At this point ODP is not supported, so no capability is
copied from the device, but the patch exposes the global ODP device
capability bit.
Signed-off-by: NShachar Raindel <raindel@mellanox.com>
Signed-off-by: NHaggai Eran <haggaie@mellanox.com>
Signed-off-by: NRoland Dreier <roland@purestorage.com>

The check to verify that userspace does not provide an invalid index to the
micro UAR was placed too late. Fix this by moving the check before using the
index.

Reported by: Shachar Raindel <raindel@mellanox.com>
Signed-off-by: NEli Cohen <eli@mellanox.com>
Signed-off-by: NRoland Dreier <roland@purestorage.com>

Some ULPs may make use of resources created in create_umr_res so make sure to
call destroy_umrc_res after returning from ib_unregister_device, which makes
sure all ULPs have closed their resources.
Signed-off-by: NEli Cohen <eli@mellanox.com>
Signed-off-by: NRoland Dreier <roland@purestorage.com>

Rearrange struct mlx5_caps so it has a "gen" field to represent the current
capabilities configured for the device. Max capabilities can also be queried
from the device. Also update capabilities struct to contain more fields as per
the latest revision if firmware specification.
Signed-off-by: NEli Cohen <eli@mellanox.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

In the event flow, we currently pass only a port number in the
void *data argument.  Rather than pass a pointer to the event handlers,
we should use an "unsigned long" parameter, and pass the port number
value directly.

In the future, if necessary for some events, we can use the unsigned long
parameter to pass a pointer.

Based on a patch by Eli Cohen <eli@mellanox.com>
Signed-off-by: NJack Morgenstein <jackm@dev.mellanox.co.il>
Signed-off-by: NEli Cohen <eli@mellanox.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

There were many places where parameters which should be u8/u16 were
integer type.

Additionally, in 2 places, a check for a non-null pointer was added
before dereferencing the pointer (this is actually a bug fix).
Signed-off-by: NJack Morgenstein <jackm@dev.mellanox.co.il>
Signed-off-by: NEli Cohen <eli@mellanox.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

In preparation for a new mlx5 device which is VPI (i.e., ports can be
either IB or ETH), move the pci device functionality from mlx5_ib
to mlx5_core.

This involves the following changes:
1. Move mlx5_core_dev struct out of mlx5_ib_dev. mlx5_core_dev
   is now an independent structure maintained by mlx5_core.
   mlx5_ib_dev now has a pointer to that struct.
   This requires changing a lot of places where the core_dev
   struct was accessed via mlx5_ib_dev (now, this needs to
   be a pointer dereference).
2. All PCI initializations are now done in mlx5_core. Thus,
   it is now mlx5_core which does pci_register_device (and not
   mlx5_ib, as was previously).
3. mlx5_ib now registers itself with mlx5_core as an "interface"
   driver. This is very similar to the mechanism employed for
   the mlx4 (ConnectX) driver. Once the HCA is initialized
   (by mlx5_core), it invokes the interface drivers to do
   their initializations.
4. There is a new event handler which the core registers:
   mlx5_core_event(). This event handler invokes the
   event handlers registered by the interfaces.

Based on a patch by Eli Cohen <eli@mellanox.com>
Signed-off-by: NJack Morgenstein <jackm@dev.mellanox.co.il>
Signed-off-by: NEli Cohen <eli@mellanox.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Add support for the block multicast loopback QP creation flag along
the proper firmware API for that.
Signed-off-by: NEli Cohen <eli@mellanox.com>
Signed-off-by: NOr Gerlitz <ogerlitz@mellanox.com>
Signed-off-by: NRoland Dreier <roland@purestorage.com>

Currently support only T10-DIF types of signature handover operations
(types 1|2|3).
Signed-off-by: NSagi Grimberg <sagig@mellanox.com>
Signed-off-by: NRoland Dreier <roland@purestorage.com>

This commit takes care of the generated signature error CQE generated
by the HW (if happened).  The underlying mlx5 driver will handle
signature error completions and will mark the relevant memory region
as dirty.

Once the consumer gets the completion for the transaction, it must
check for signature errors on signature memory region using a new
lightweight verb ib_check_mr_status().

In case the user doesn't check for signature error (i.e. doesn't call
ib_check_mr_status() with status check IB_MR_CHECK_SIG_STATUS), the
memory region cannot be used for another signature operation
(REG_SIG_MR work request will fail).
Signed-off-by: NSagi Grimberg <sagig@mellanox.com>
Signed-off-by: NRoland Dreier <roland@purestorage.com>

Support create_mr and destroy_mr verbs.  Creating ib_mr may be done
for either ib_mr that will register regular page lists like
alloc_fast_reg_mr routine, or indirect ib_mrs that can register other
(pre-registered) ib_mrs in an indirect manner.

In addition user may request signature enable, that will mean that the
created ib_mr may be attached with signature attributes (BSF, PSVs).

Currently we only allow direct/indirect registration modes.
Signed-off-by: NSagi Grimberg <sagig@mellanox.com>
Signed-off-by: NRoland Dreier <roland@purestorage.com>

Bump all Mellanox driver versions.
Signed-off-by: NAmir Vadai <amirv@mellanox.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Currently Connect-IB does not support blocking multicast loopback, so
don't set IB_DEVICE_BLOCK_MULTICAST_LOOPBACK in the device caps.

Reported by: Or Gerlitz <ogerlitz@mellanox.com>
Signed-off-by: NEli Cohen <eli@mellanox.com>
Signed-off-by: NRoland Dreier <roland@purestorage.com>

Commit c1be5232 ("Fix micro UAR allocator") broke binary compatibility
between libmlx5 and mlx5_ib since it defines a different value to the number
of micro UARs per page, leading to wrong calculation in libmlx5. This patch
defines struct mlx5_ib_alloc_ucontext_req_v2 as an extension to struct
mlx5_ib_alloc_ucontext_req.  The extended size is determined in mlx5_ib_alloc_ucontext()
and in case of old library we use uuarn 0 which works fine -- this is
acheived due to create_user_qp() falling back from high to medium then to
low class where low class will return 0.  For new libraries we use the
more sophisticated allocation algorithm.
Signed-off-by: NEli Cohen <eli@mellanox.com>
Reviewed-by: NYann Droneaud <ydroneaud@opteya.com>
Signed-off-by: NRoland Dreier <roland@purestorage.com>

The micro UAR (uuar) allocator had a bug which resulted from the fact
that in each UAR we only have two micro UARs avaialable, those at
index 0 and 1.  This patch defines iterators to aid in traversing the
list of available micro UARs when allocating a uuar.

In addition, change the logic in create_user_qp() so that if high
class allocation fails (high class means lower latency), we revert to
medium class and not to the low class.
Signed-off-by: NEli Cohen <eli@mellanox.com>
Signed-off-by: NRoland Dreier <roland@purestorage.com>

Use asynchronous commands to execute up to eight concurrent create MR
commands. This is to fill memory caches faster so we keep consuming
from there.  Also, increase timeout for shrinking caches to five
minutes.
Signed-off-by: NEli Cohen <eli@mellanox.com>
Signed-off-by: NRoland Dreier <roland@purestorage.com>

It's helpful for a driver to put the pci slot name in its interrupt
names, so /proc/interrupts will show the pci slot of the device.
Signed-off-by: NSagi Grimberg <sagig@mellanox.com>
Signed-off-by: NEli Cohen <eli@mellanox.com>
Signed-off-by: NRoland Dreier <roland@purestorage.com>

Currently Atomic operations don't work properly.  Disable them for the
time being.
Signed-off-by: NEli Cohen <eli@mellanox.com>
Signed-off-by: NRoland Dreier <roland@purestorage.com>

On a single ported Connect-IB, its possible for the firmware to issue
events on the non-existing 2nd port.  Make sure to ignore events
generated for such ports.
Signed-off-by: NEli Cohen <eli@mellanox.com>
Signed-off-by: NRoland Dreier <roland@purestorage.com>

We don't set "resp.reserved".  Since it's at the end of the struct
that means we don't have to copy it to the user.
Signed-off-by: NDan Carpenter <dan.carpenter@oracle.com>
Acked-by: NEli Cohen <eli@mellanox.com>
Signed-off-by: NRoland Dreier <roland@purestorage.com>