Add a few new SSE/AVX/AVX512 instruction groups/features for enumeration
in /proc/cpuinfo: AVX512_VBMI2, GFNI, VAES, VPCLMULQDQ, AVX512_VNNI,
AVX512_BITALG.

 CPUID.(EAX=7,ECX=0):ECX[bit 6]  AVX512_VBMI2
 CPUID.(EAX=7,ECX=0):ECX[bit 8]  GFNI
 CPUID.(EAX=7,ECX=0):ECX[bit 9]  VAES
 CPUID.(EAX=7,ECX=0):ECX[bit 10] VPCLMULQDQ
 CPUID.(EAX=7,ECX=0):ECX[bit 11] AVX512_VNNI
 CPUID.(EAX=7,ECX=0):ECX[bit 12] AVX512_BITALG

Detailed information of CPUID bits for these features can be found
in the Intel Architecture Instruction Set Extensions and Future Features
Programming Interface document (refer to Table 1-1. and Table 1-2.).
A copy of this document is available at
https://bugzilla.kernel.org/show_bug.cgi?id=197239Signed-off-by: NGayatri Kammela <gayatri.kammela@intel.com>
Acked-by: NThomas Gleixner <tglx@linutronix.de>
Cc: Andi Kleen <andi.kleen@intel.com>
Cc: Fenghua Yu <fenghua.yu@intel.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Ravi Shankar <ravi.v.shankar@intel.com>
Cc: Ricardo Neri <ricardo.neri@intel.com>
Cc: Yang Zhong <yang.zhong@intel.com>
Cc: bp@alien8.de
Link: http://lkml.kernel.org/r/1509412829-23380-1-git-send-email-gayatri.kammela@intel.comSigned-off-by: NIngo Molnar <mingo@kernel.org>

do_clear_cpu_cap() allocates a bitmap to keep track of disabled feature
dependencies. That bitmap is sized NCAPINTS * BITS_PER_INIT. The possible
'features' which can be handed in are larger than this, because after the
capabilities the bug 'feature' bits occupy another 32bit. Not really
obvious...

So clearing any of the misfeature bits, as 32bit does for the F00F bug,
accesses that bitmap out of bounds thereby corrupting the stack.

Size the bitmap proper and add a sanity check to catch accidental out of
bound access.

Fixes: 0b00de85 ("x86/cpuid: Add generic table for CPUID dependencies")
Reported-by: Nkernel test robot <xiaolong.ye@intel.com>
Signed-off-by: NThomas Gleixner <tglx@linutronix.de>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: Borislav Petkov <bp@alien8.de>
Link: https://lkml.kernel.org/r/20171018022023.GA12058@yexl-desktop

Clearing a CPU feature with setup_clear_cpu_cap() clears all features
which depend on it. Expressing feature dependencies in one place is
easier to maintain than keeping functions like
fpu__xstate_clear_all_cpu_caps() up to date.

The features which depend on XSAVE have their dependency expressed in the
dependency table, so its sufficient to clear X86_FEATURE_XSAVE.

Remove the explicit clearing of XSAVE dependent features.
Signed-off-by: NAndi Kleen <ak@linux.intel.com>
Reviewed-by: NThomas Gleixner <tglx@linutronix.de>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: http://lkml.kernel.org/r/20171013215645.23166-6-andi@firstfloor.orgSigned-off-by: NIngo Molnar <mingo@kernel.org>

Before enabling XSAVE, not only check the XSAVE specific CPUID bits,
but also the base CPUID features of the respective XSAVE feature.
This allows to disable individual XSAVE states using the existing
clearcpuid= option, which can be useful for performance testing
and debugging, and also in general avoids inconsistencies.
Signed-off-by: NAndi Kleen <ak@linux.intel.com>
Reviewed-by: NThomas Gleixner <tglx@linutronix.de>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: http://lkml.kernel.org/r/20171013215645.23166-5-andi@firstfloor.orgSigned-off-by: NIngo Molnar <mingo@kernel.org>

With a followon patch we want to make clearcpuid affect the XSAVE
configuration. But xsave is currently initialized before arguments
are parsed. Move the clearcpuid= parsing into the special
early xsave argument parsing code.

Since clearcpuid= contains a = we need to keep the old __setup
around as a dummy, otherwise it would end up as a environment
variable in init's environment.
Signed-off-by: NAndi Kleen <ak@linux.intel.com>
Reviewed-by: NThomas Gleixner <tglx@linutronix.de>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: http://lkml.kernel.org/r/20171013215645.23166-4-andi@firstfloor.orgSigned-off-by: NIngo Molnar <mingo@kernel.org>

Some CPUID features depend on other features. Currently it's
possible to to clear dependent features, but not clear the base features,
which can cause various interesting problems.

This patch implements a generic table to describe dependencies
between CPUID features, to be used by all code that clears
CPUID.

Some subsystems (like XSAVE) had an own implementation of this,
but it's better to do it all in a single place for everyone.

Then clear_cpu_cap and setup_clear_cpu_cap always look up
this table and clear all dependencies too.

This is intended to be a practical table: only for features
that make sense to clear. If someone for example clears FPU,
or other features that are essentially part of the required
base feature set, not much is going to work. Handling
that is right now out of scope. We're only handling
features which can be usefully cleared.
Signed-off-by: NAndi Kleen <ak@linux.intel.com>
Reviewed-by: NThomas Gleixner <tglx@linutronix.de>
Cc: Jonathan McDowell <noodles@earth.li>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: http://lkml.kernel.org/r/20171013215645.23166-3-andi@firstfloor.orgSigned-off-by: NIngo Molnar <mingo@kernel.org>

Add two simple wrappers around set_bit/clear_bit() that accept
the common case of an u32 array. This avoids writing
casts in all callers.
Signed-off-by: NAndi Kleen <ak@linux.intel.com>
Reviewed-by: NThomas Gleixner <tglx@linutronix.de>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: http://lkml.kernel.org/r/20171013215645.23166-2-andi@firstfloor.orgSigned-off-by: NIngo Molnar <mingo@kernel.org>

Commit:

  d1898b73 ("x86/fpu: Add tracepoints to dump FPU state at key points")

... added the 'x86_fpu_state' and 'x86_fpu_deactivate_state' trace points,
but never used them. Today they are still not used. As they take up
and waste memory, remove them.
Signed-off-by: NSteven Rostedt (VMware) <rostedt@goodmis.org>
Cc: Dave Hansen <dave.hansen@linux.intel.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Link: http://lkml.kernel.org/r/20171012180619.670b68b6@gandalf.local.homeSigned-off-by: NIngo Molnar <mingo@kernel.org>

Pull device properties framework fixes from Rafael Wysocki:
 "These fix an issue related to device removal introduced during the 4.9
  cycle and fix up new functionality added recently.

  Specifics:

   - Fix a device properties management issue, introduced during the 4.9
     cycle, that causes device properties associated with a parent
     device to go away on a removal of its child in some cases (Jarkko
     Nikula).

   - Fix inconsistencies in error codes returned by a new function
     helper in the device properties framework depending on the
     underlying low-level firmware interface, DT or ACPI, by making the
     meaning of error codes returned in the ACPI case agree with the
     meaning of DT error codes in analogous situations (Sakari Ailus)"

* tag 'devprop-4.14-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm:
  ACPI: properties: Fix __acpi_node_get_property_reference() return codes
  ACPI: properties: Align return codes of __acpi_node_get_property_reference()
  device property: Track owner device of device property

Pull xfs fixes from Darrick Wong:

 - Fix a stale kernel memory exposure when logging inodes.

 - Fix some build problems with CONFIG_XFS_RT=n

 - Don't change inode mode if the acl write fails, leaving the file
   totally inaccessible.

 - Fix a dangling pointer problem when removing an attr fork under
   memory pressure.

 - Don't crash while trying to invalidate a null buffer associated with
   a corrupt metadata pointer.

* tag 'xfs-4.14-fixes-5' of git://git.kernel.org/pub/scm/fs/xfs/xfs-linux:
  xfs: handle error if xfs_btree_get_bufs fails
  xfs: reinit btree pointer on attr tree inactivation walk
  xfs: Fix bool initialization/comparison
  xfs: don't change inode mode if ACL update fails
  xfs: move more RT specific code under CONFIG_XFS_RT
  xfs: Don't log uninitialised fields in inode structures

If faddr2line is given a function name which is the last one listed by
"nm -n", it will fail because it never finds the next symbol.

So teach the awk script to catch that possibility, and use 'size' to
provide the end point of the last function.
Signed-off-by: NNeilBrown <neilb@suse.com>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

Pull quota fix from Jan Kara:
 "A fix for a regression in handling of quota grace times and warnings"

* 'for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jack/linux-fs:
  quota: Generate warnings for DQUOT_SPACE_NOFAIL allocations

Pull kvm fixes from Paolo Bonzini:
 "Another latent bug related to PCID, an out-of-bounds access, and a
  submaintainer change being finally made official"

* tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm:
  MAINTAINERS: Add Paul Mackerras as maintainer for KVM/powerpc
  KVM: nVMX: fix guest CR4 loading when emulating L2 to L1 exit
  KVM: MMU: always terminate page walks at level 1
  KVM: nVMX: update last_nonleaf_level when initializing nested EPT

Pull crypto fixes from Herbert Xu:

 - fix crashes in skcipher/shash from zero-length input.

 - fix softirq GFP_KERNEL allocation in shash_setkey_unaligned.

 - error path bug fix in xts create function.

 - fix compiler warning regressions in axis and stm32

* 'linus' of git://git.kernel.org/pub/scm/linux/kernel/git/herbert/crypto-2.6:
  crypto: shash - Fix zero-length shash ahash digest crash
  crypto: skcipher - Fix crash on zero-length input
  crypto: shash - Fix a sleep-in-atomic bug in shash_setkey_unaligned
  crypto: xts - Fix an error handling path in 'create()'
  crypto: stm32 - Try to fix hash padding
  crypto: axis - hide an unused variable

Pull livepatching fix from Jiri Kosina:

 - bugfix for handling of coming modules (incorrect handling of failure)
   from Joe Lawrence

* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jikos/livepatching:
  livepatch: unpatch all klp_objects if klp_module_coming fails

Pull HID fixes from Jiri Kosina:

 - fix for potential out-of-bounds memory access (found by fuzzing,
   likely requires specially crafted device to trigger) by Jaejoong Kim

 - two new device IDs for elecom driver from Alex Manoussakis

* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jikos/hid:
  HID: hid-elecom: extend to fix descriptor for HUGE trackball
  HID: usbhid: fix out-of-bounds bug

Pull sound fixes from Takashi Iwai:
 "It's been a busy week for defending the attacks from fuzzer people.

  This contains various USB-audio driver fixes and sequencer core fixes
  spotted by syzkaller and other fuzzer, as well as one quirk for a
  Plantronics USB audio device"

* tag 'sound-4.14-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound:
  ALSA: caiaq: Fix stray URB at probe error path
  ALSA: seq: Fix use-after-free at creating a port
  ALSA: usb-audio: Kill stray URB at exiting
  ALSA: line6: Fix leftover URB at error-path during probe
  ALSA: line6: Fix NULL dereference at podhd_disconnect()
  ALSA: line6: Fix missing initialization before error path
  ALSA: seq: Fix copy_from_user() call inside lock
  ALSA: usb-audio: Add sample rate quirk for Plantronics P610

Merge waitid() fix from Kees Cook.

I'd have hoped that the unsafe_{get|put}_user() naming would have
avoided these kinds of stupid bugs, but no such luck.

* waitid-fix:
  waitid(): Add missing access_ok() checks

Paul is handling almost all of the powerpc related KVM patches nowadays,
so he should be mentioned in the MAINTAINERS file accordingly.
Signed-off-by: NThomas Huth <thuth@redhat.com>
Signed-off-by: NPaolo Bonzini <pbonzini@redhat.com>

When KVM emulates an exit from L2 to L1, it loads L1 CR4 into the
guest CR4. Before this CR4 loading, the guest CR4 refers to L2
CR4. Because these two CR4's are in different levels of guest, we
should vmx_set_cr4() rather than kvm_set_cr4() here. The latter, which
is used to handle guest writes to its CR4, checks the guest change to
CR4 and may fail if the change is invalid.

The failure may cause trouble. Consider we start
  a L1 guest with non-zero L1 PCID in use,
     (i.e. L1 CR4.PCIDE == 1 && L1 CR3.PCID != 0)
and
  a L2 guest with L2 PCID disabled,
     (i.e. L2 CR4.PCIDE == 0)
and following events may happen:

1. If kvm_set_cr4() is used in load_vmcs12_host_state() to load L1 CR4
   into guest CR4 (in VMCS01) for L2 to L1 exit, it will fail because
   of PCID check. As a result, the guest CR4 recorded in L0 KVM (i.e.
   vcpu->arch.cr4) is left to the value of L2 CR4.

2. Later, if L1 attempts to change its CR4, e.g., clearing VMXE bit,
   kvm_set_cr4() in L0 KVM will think L1 also wants to enable PCID,
   because the wrong L2 CR4 is used by L0 KVM as L1 CR4. As L1
   CR3.PCID != 0, L0 KVM will inject GP to L1 guest.

Fixes: 4704d0be ("KVM: nVMX: Exiting from L2 to L1")
Cc: qemu-stable@nongnu.org
Signed-off-by: NHaozhong Zhang <haozhong.zhang@intel.com>
Signed-off-by: NPaolo Bonzini <pbonzini@redhat.com>

Fix more return codes for device property: Align return codes of
__acpi_node_get_property_reference().

In particular, what was missed previously:

 -EPROTO could be returned in certain cases, now -EINVAL;
 -EINVAL was returned if the property was not found, now -ENOENT;
 -EINVAL was returned also if the index was higher than the number of
         entries in a package, now -ENOENT.
Reported-by: NHyungwoo Yang <hyungwoo.yang@intel.com>
Fixes: 3e3119d3 (device property: Introduce fwnode_property_get_reference_args)
Signed-off-by: NSakari Ailus <sakari.ailus@linux.intel.com>
Tested-by: NHyungwoo Yang <hyungwoo.yang@intel.com>
Signed-off-by: NRafael J. Wysocki <rafael.j.wysocki@intel.com>

acpi_fwnode_get_reference_args(), the function implementing ACPI
support for fwnode_property_get_reference_args(), returns directly
error codes from __acpi_node_get_property_reference(). The latter
uses different error codes than the OF implementation. In particular,
the OF implementation uses -ENOENT to indicate that the property is
not found, a reference entry is empty and there are no more
references.

Document and align the error codes for property for
fwnode_property_get_reference_args() so that they match with
of_parse_phandle_with_args().

Fixes: 3e3119d3 (device property: Introduce fwnode_property_get_reference_args)
Signed-off-by: NSakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: NRafael J. Wysocki <rafael.j.wysocki@intel.com>

Pull rpmsg fixes from Bjorn Andersson:
 "This corrects two mistakes in the Qualcomm GLINK SMEM driver"

* tag 'rpmsg-v4.14-fixes' of git://github.com/andersson/remoteproc:
  rpmsg: glink: Fix memory leak in qcom_glink_alloc_intent()
  rpmsg: glink: Unlock on error in qcom_glink_request_intent()

Pull remoteproc fixes from Bjorn Andersson:
 "This fixes a couple of issues in the imx_rproc driver and corrects the
  Kconfig dependencies of the Qualcomm remoteproc drivers"

* tag 'rproc-v4.14-fixes' of git://github.com/andersson/remoteproc:
  remoteproc: imx_rproc: fix return value check in imx_rproc_addr_init()
  remoteproc: qcom: fix RPMSG_QCOM_GLINK_SMEM dependencies
  remoteproc: imx_rproc: fix a couple off by one bugs

In case of error, the function devm_ioremap() returns NULL pointer
not ERR_PTR(). The IS_ERR() test in the return value check should
be replaced with NULL test.
Reviewed-by: NOleksij Rempel <o.rempel@pengutronix.de>
Signed-off-by: NWei Yongjun <weiyongjun1@huawei.com>
Signed-off-by: NBjorn Andersson <bjorn.andersson@linaro.org>

Jason reported that a corrupted filesystem failed to replay
the log with a metadata block out of bounds warning:

XFS (dm-2): _xfs_buf_find: Block out of range: block 0x80270fff8, EOFS 0x9c40000

_xfs_buf_find() and xfs_btree_get_bufs() return NULL if
that happens, and then when xfs_alloc_fix_freelist() calls
xfs_trans_binval() on that NULL bp, we oops with:

BUG: unable to handle kernel NULL pointer dereference at 00000000000000f8

We don't handle _xfs_buf_find errors very well, every
caller higher up the stack gets to guess at why it failed.
But we should at least handle it somehow, so return
EFSCORRUPTED here.
Reported-by: NJason L Tibbitts III <tibbs@math.uh.edu>
Signed-off-by: NEric Sandeen <sandeen@redhat.com>
Reviewed-by: NChristoph Hellwig <hch@lst.de>
Reviewed-by: NDarrick J. Wong <darrick.wong@oracle.com>
Signed-off-by: NDarrick J. Wong <darrick.wong@oracle.com>

xfs_attr3_root_inactive() walks the attr fork tree to invalidate the
associated blocks. xfs_attr3_node_inactive() recursively descends
from internal blocks to leaf blocks, caching block address values
along the way to revisit parent blocks, locate the next entry and
descend down that branch of the tree.

The code that attempts to reread the parent block is unsafe because
it assumes that the local xfs_da_node_entry pointer remains valid
after an xfs_trans_brelse() and re-read of the parent buffer. Under
heavy memory pressure, it is possible that the buffer has been
reclaimed and reallocated by the time the parent block is reread.
This means that 'btree' can point to an invalid memory address, lead
to a random/garbage value for child_fsb and cause the subsequent
read of the attr fork to go off the rails and return a NULL buffer
for an attr fork offset that is most likely not allocated.

Note that this problem can be manufactured by setting
XFS_ATTR_BTREE_REF to 0 to prevent LRU caching of attr buffers,
creating a file with a multi-level attr fork and removing it to
trigger inactivation.

To address this problem, reinit the node/btree pointers to the
parent buffer after it has been re-read. This ensures btree points
to a valid record and allows the walk to proceed.
Signed-off-by: NBrian Foster <bfoster@redhat.com>
Reviewed-by: NDarrick J. Wong <darrick.wong@oracle.com>
Signed-off-by: NDarrick J. Wong <darrick.wong@oracle.com>

Bool initializations should use true and false. Bool tests don't need
comparisons.
Signed-off-by: NThomas Meyer <thomas@m3y3r.de>
Reviewed-by: NBrian Foster <bfoster@redhat.com>
Reviewed-by: NDarrick J. Wong <darrick.wong@oracle.com>
Signed-off-by: NDarrick J. Wong <darrick.wong@oracle.com>

If we get ENOSPC half way through setting the ACL, the inode mode
can still be changed even though the ACL does not exist. Reorder the
operation to only change the mode of the inode if the ACL is set
correctly.

Whilst this does not fix the problem with crash consistency (that requires
attribute addition to be a deferred op) it does prevent ENOSPC and other
non-fatal errors setting an xattr to be handled sanely.

This fixes xfstests generic/449.
Signed-Off-By: NDave Chinner <dchinner@redhat.com>
Reviewed-by: NBrian Foster <bfoster@redhat.com>
Reviewed-by: NDarrick J. Wong <darrick.wong@oracle.com>
Signed-off-by: NDarrick J. Wong <darrick.wong@oracle.com>

Various utility functions and interfaces that iterate internal
devices try to reference the realtime device even when RT support is
not compiled into the kernel.

Make sure this code is excluded from the CONFIG_XFS_RT=n build,
and where appropriate stub functions to return fatal errors if
they ever get called when RT support is not present.
Signed-Off-By: NDave Chinner <dchinner@redhat.com>
Reviewed-by: NBrian Foster <bfoster@redhat.com>
Reviewed-by: NDarrick J. Wong <darrick.wong@oracle.com>
Signed-off-by: NDarrick J. Wong <darrick.wong@oracle.com>

Prevent kmemcheck from throwing warnings about reading uninitialised
memory when formatting inodes into the incore log buffer. There are
several issues here - we don't always log all the fields in the
inode log format item, and we never log the inode the
di_next_unlinked field.

In the case of the inode log format item, this is exacerbated
by the old xfs_inode_log_format structure padding issue. Hence make
the padded, 64 bit aligned version of the structure the one we always
use for formatting the log and get rid of the 64 bit variant. This
means we'll always log the 64-bit version and so recovery only needs
to convert from the unpadded 32 bit version from older 32 bit
kernels.
Signed-Off-By: NDave Chinner <dchinner@redhat.com>
Tested-by: NTetsuo Handa <penguin-kernel@I-love.SAKURA.ne.jp>
Reviewed-by: NBrian Foster <bfoster@redhat.com>
Reviewed-by: NDarrick J. Wong <darrick.wong@oracle.com>
Signed-off-by: NDarrick J. Wong <darrick.wong@oracle.com>

Commit 77469c3f prevented setting the page as uptodate when we wrote
the right amount of data, fix that.

Fixes: 77469c3f ("9p: saner ->write_end() on failing copy into non-uptodate page")
Reviewed-by: NJan Kara <jack@suse.com>
Signed-off-by: NAlexander Levin <alexander.levin@verizon.com>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

Pull GPIO fixes from Linus Walleij:
 "Here are some smallish GPIO fixes for v4.14. Like with pin control:
  some build/Kconfig noise and one serious bug in a specific driver.

   - Three Kconfig/build warning fixes

   - A fix for lost edge IRQs in the OMAP driver"

* tag 'gpio-v4.14-2' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-gpio:
  gpio: omap: Fix lost edge interrupts
  gpio: omap: omap_gpio_show_rev is not __init
  gpio: acpi: work around false-positive -Wstring-overflow warning
  gpio: thunderx: select IRQ_DOMAIN_HIERARCHY instead of depends on

Pull pin control fixes from Linus Walleij:
 "Two small things and a slightly larger thing in the Intel Cherryview.

   - Fix two build problems

   - Fix a regression on the Intel Cherryview interrupt path"

* tag 'pinctrl-v4.14-3' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-pinctrl:
  pinctrl: cherryview: fix issues caused by dynamic gpio irqs mapping
  pinctrl/amd: Fix build dependency on pinmux code
  pinctrl: bcm2835: fix build warning in bcm2835_gpio_irq_handle_bank

Pull vfs fixes from Al Viro:
 "Fairly old DIO bug caught by Andreas (3.10+) and several slightly
  younger blk_rq_map_user_iov() bugs, both on map and copy codepaths
  (Vitaly and me)"

* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs:
  bio_copy_user_iov(): don't ignore ->iov_offset
  more bio_map_user_iov() leak fixes
  fix unbalanced page refcounting in bio_map_user_iov
  direct-io: Prevent NULL pointer access in submit_page_section

caiaq driver doesn't kill the URB properly at its error path during
the probe, which may lead to a use-after-free error later.  This patch
addresses it.
Reported-by: NJohan Hovold <johan@kernel.org>
Reviewed-by: NJohan Hovold <johan@kernel.org>
Cc: <stable@vger.kernel.org>
Signed-off-by: NTakashi Iwai <tiwai@suse.de>

In addition to DEFT, Elecom introduced a larger trackball called HUGE, in
both wired (M-HT1URBK) and wireless (M-HT1DRBK) versions. It has the same
buttons and behavior as the DEFT. This patch adds the two relevant USB IDs
to enable operation of the three Fn buttons on the top of the device.

Cc: Diego Elio Petteno <flameeyes@flameeyes.eu>
Signed-off-by: NAlex Manoussakis <amanou@gnu.org>
Signed-off-by: NJiri Kosina <jkosina@suse.cz>

The hid descriptor identifies the length and type of subordinate
descriptors for a device. If the received hid descriptor is smaller than
the size of the struct hid_descriptor, it is possible to cause
out-of-bounds.

In addition, if bNumDescriptors of the hid descriptor have an incorrect
value, this can also cause out-of-bounds while approaching hdesc->desc[n].

So check the size of hid descriptor and bNumDescriptors.

	BUG: KASAN: slab-out-of-bounds in usbhid_parse+0x9b1/0xa20
	Read of size 1 at addr ffff88006c5f8edf by task kworker/1:2/1261

	CPU: 1 PID: 1261 Comm: kworker/1:2 Not tainted
	4.14.0-rc1-42251-gebb2c243 #169
	Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS Bochs 01/01/2011
	Workqueue: usb_hub_wq hub_event
	Call Trace:
	__dump_stack lib/dump_stack.c:16
	dump_stack+0x292/0x395 lib/dump_stack.c:52
	print_address_description+0x78/0x280 mm/kasan/report.c:252
	kasan_report_error mm/kasan/report.c:351
	kasan_report+0x22f/0x340 mm/kasan/report.c:409
	__asan_report_load1_noabort+0x19/0x20 mm/kasan/report.c:427
	usbhid_parse+0x9b1/0xa20 drivers/hid/usbhid/hid-core.c:1004
	hid_add_device+0x16b/0xb30 drivers/hid/hid-core.c:2944
	usbhid_probe+0xc28/0x1100 drivers/hid/usbhid/hid-core.c:1369
	usb_probe_interface+0x35d/0x8e0 drivers/usb/core/driver.c:361
	really_probe drivers/base/dd.c:413
	driver_probe_device+0x610/0xa00 drivers/base/dd.c:557
	__device_attach_driver+0x230/0x290 drivers/base/dd.c:653
	bus_for_each_drv+0x161/0x210 drivers/base/bus.c:463
	__device_attach+0x26e/0x3d0 drivers/base/dd.c:710
	device_initial_probe+0x1f/0x30 drivers/base/dd.c:757
	bus_probe_device+0x1eb/0x290 drivers/base/bus.c:523
	device_add+0xd0b/0x1660 drivers/base/core.c:1835
	usb_set_configuration+0x104e/0x1870 drivers/usb/core/message.c:1932
	generic_probe+0x73/0xe0 drivers/usb/core/generic.c:174
	usb_probe_device+0xaf/0xe0 drivers/usb/core/driver.c:266
	really_probe drivers/base/dd.c:413
	driver_probe_device+0x610/0xa00 drivers/base/dd.c:557
	__device_attach_driver+0x230/0x290 drivers/base/dd.c:653
	bus_for_each_drv+0x161/0x210 drivers/base/bus.c:463
	__device_attach+0x26e/0x3d0 drivers/base/dd.c:710
	device_initial_probe+0x1f/0x30 drivers/base/dd.c:757
	bus_probe_device+0x1eb/0x290 drivers/base/bus.c:523
	device_add+0xd0b/0x1660 drivers/base/core.c:1835
	usb_new_device+0x7b8/0x1020 drivers/usb/core/hub.c:2457
	hub_port_connect drivers/usb/core/hub.c:4903
	hub_port_connect_change drivers/usb/core/hub.c:5009
	port_event drivers/usb/core/hub.c:5115
	hub_event+0x194d/0x3740 drivers/usb/core/hub.c:5195
	process_one_work+0xc7f/0x1db0 kernel/workqueue.c:2119
	worker_thread+0x221/0x1850 kernel/workqueue.c:2253
	kthread+0x3a1/0x470 kernel/kthread.c:231
	ret_from_fork+0x2a/0x40 arch/x86/entry/entry_64.S:431

Cc: stable@vger.kernel.org
Reported-by: NAndrey Konovalov <andreyknvl@google.com>
Signed-off-by: NJaejoong Kim <climbbb.kim@gmail.com>
Tested-by: NAndrey Konovalov <andreyknvl@google.com>
Acked-by: NAlan Stern <stern@rowland.harvard.edu>
Signed-off-by: NJiri Kosina <jkosina@suse.cz>

When an incoming module is considered for livepatching by
klp_module_coming(), it iterates over multiple patches and multiple
kernel objects in this order:

	list_for_each_entry(patch, &klp_patches, list) {
		klp_for_each_object(patch, obj) {

which means that if one of the kernel objects fails to patch,
klp_module_coming()'s error path needs to unpatch and cleanup any kernel
objects that were already patched by a previous patch.
Reported-by: NMiroslav Benes <mbenes@suse.cz>
Suggested-by: NPetr Mladek <pmladek@suse.com>
Signed-off-by: NJoe Lawrence <joe.lawrence@redhat.com>
Acked-by: NJosh Poimboeuf <jpoimboe@redhat.com>
Reviewed-by: NPetr Mladek <pmladek@suse.com>
Signed-off-by: NJiri Kosina <jkosina@suse.cz>

There is a potential race window opened at creating and deleting a
port via ioctl, as spotted by fuzzing.  snd_seq_create_port() creates
a port object and returns its pointer, but it doesn't take the
refcount, thus it can be deleted immediately by another thread.
Meanwhile, snd_seq_ioctl_create_port() still calls the function
snd_seq_system_client_ev_port_start() with the created port object
that is being deleted, and this triggers use-after-free like:

 BUG: KASAN: use-after-free in snd_seq_ioctl_create_port+0x504/0x630 [snd_seq] at addr ffff8801f2241cb1
 =============================================================================
 BUG kmalloc-512 (Tainted: G    B          ): kasan: bad access detected
 -----------------------------------------------------------------------------
 INFO: Allocated in snd_seq_create_port+0x94/0x9b0 [snd_seq] age=1 cpu=3 pid=4511
 	___slab_alloc+0x425/0x460
 	__slab_alloc+0x20/0x40
  	kmem_cache_alloc_trace+0x150/0x190
	snd_seq_create_port+0x94/0x9b0 [snd_seq]
	snd_seq_ioctl_create_port+0xd1/0x630 [snd_seq]
 	snd_seq_do_ioctl+0x11c/0x190 [snd_seq]
 	snd_seq_ioctl+0x40/0x80 [snd_seq]
 	do_vfs_ioctl+0x54b/0xda0
 	SyS_ioctl+0x79/0x90
 	entry_SYSCALL_64_fastpath+0x16/0x75
 INFO: Freed in port_delete+0x136/0x1a0 [snd_seq] age=1 cpu=2 pid=4717
 	__slab_free+0x204/0x310
 	kfree+0x15f/0x180
 	port_delete+0x136/0x1a0 [snd_seq]
 	snd_seq_delete_port+0x235/0x350 [snd_seq]
 	snd_seq_ioctl_delete_port+0xc8/0x180 [snd_seq]
 	snd_seq_do_ioctl+0x11c/0x190 [snd_seq]
 	snd_seq_ioctl+0x40/0x80 [snd_seq]
 	do_vfs_ioctl+0x54b/0xda0
 	SyS_ioctl+0x79/0x90
 	entry_SYSCALL_64_fastpath+0x16/0x75
 Call Trace:
  [<ffffffff81b03781>] dump_stack+0x63/0x82
  [<ffffffff81531b3b>] print_trailer+0xfb/0x160
  [<ffffffff81536db4>] object_err+0x34/0x40
  [<ffffffff815392d3>] kasan_report.part.2+0x223/0x520
  [<ffffffffa07aadf4>] ? snd_seq_ioctl_create_port+0x504/0x630 [snd_seq]
  [<ffffffff815395fe>] __asan_report_load1_noabort+0x2e/0x30
  [<ffffffffa07aadf4>] snd_seq_ioctl_create_port+0x504/0x630 [snd_seq]
  [<ffffffffa07aa8f0>] ? snd_seq_ioctl_delete_port+0x180/0x180 [snd_seq]
  [<ffffffff8136be50>] ? taskstats_exit+0xbc0/0xbc0
  [<ffffffffa07abc5c>] snd_seq_do_ioctl+0x11c/0x190 [snd_seq]
  [<ffffffffa07abd10>] snd_seq_ioctl+0x40/0x80 [snd_seq]
  [<ffffffff8136d433>] ? acct_account_cputime+0x63/0x80
  [<ffffffff815b515b>] do_vfs_ioctl+0x54b/0xda0
  .....

We may fix this in a few different ways, and in this patch, it's fixed
simply by taking the refcount properly at snd_seq_create_port() and
letting the caller unref the object after use.  Also, there is another
potential use-after-free by sprintf() call in snd_seq_create_port(),
and this is moved inside the lock.

This fix covers CVE-2017-15265.
Reported-and-tested-by: NMichael23 Yu <ycqzsy@gmail.com>
Suggested-by: NLinus Torvalds <torvalds@linux-foundation.org>
Cc: <stable@vger.kernel.org>
Signed-off-by: NTakashi Iwai <tiwai@suse.de>