An ioctl interface is added to get the device statistic counters.
A second ioctl is added to atomically get and reset these counters.
Signed-off-by: NStefan Behrens <sbehrens@giantdisaster.de>

The goal is to detect when drives start to get an increased error rate,
when drives should be replaced soon. Therefore statistic counters are
added that count IO errors (read, write and flush). Additionally, the
software detected errors like checksum errors and corrupted blocks are
counted.
Signed-off-by: NStefan Behrens <sbehrens@giantdisaster.de>

Reproduce:
$ mkfs.btrfs /dev/sdb7
$ mount /dev/sdb7 /mnt/btrfs -o ro
$ btrfs dev add /dev/sdb8 /mnt/btrfs
ERROR: error adding the device '/dev/sdb8' - Invalid argument

Since we mount with readonly options, and /dev/sdb7 is not a seeding one,
a readonly notification is preferred.
Signed-off-by: NLiu Bo <liubo2009@cn.fujitsu.com>
Reviewed-by: NJosef Bacik <josef@redhat.com>

btrfs_map_block sets mirror_num, so that the repair code knows eventually
which device gave us the read error. For RAID10, mirror_num must be 1 or 2.
Before this fix mirror_num was incorrectly related to our stripe index.
Signed-off-by: NJan Schmidt <list.btrfs@jan-o-sch.net>
Signed-off-by: NChris Mason <chris.mason@oracle.com>

Free fs_devices as done in the error-handling code just below.
Signed-off-by: NJulia Lawall <Julia.Lawall@lip6.fr>

Fix a bug, where in case we need to adjust stripe_size so that the
length of the resulting chunk is less than or equal to max_chunk_size,
DUP chunks turn out to be only half as big as they could be.

Cc: Arne Jansen <sensille@gmx.net>
Signed-off-by: NIlya Dryomov <idryomov@gmail.com>

We miscalculate the length of extents we're discarding, and it leads to
an eof of device.
Reported-by: NDaniel Blueman <daniel@quora.org>
Signed-off-by: NLiu Bo <liubo2009@cn.fujitsu.com>
Signed-off-by: NChris Mason <chris.mason@oracle.com>

Btrfs puts the filesystem metadata into its own address space, and
somehow the block device address space isn't getting onto disk properly
before a mount.  The end result is that a loop of mkfs and mounting the
filesystem will sometimes find stale or incorrect data.

This commit should fix it by sprinkling fdatawrites and invalidate_bdev
calls around.  This is a short term measure to make sure it is fixed.
The block devices really should be flushed and cleaned up higher in the
stack.
Signed-off-by: NChris Mason <chris.mason@oracle.com>

If relocate of block group 0 fails with ENOSPC we end up infinitely
looping because key.offset -= 1 statement in that case brings us back to
where we started.
Signed-off-by: NIlya Dryomov <idryomov@gmail.com>

Generally we don't allow dup for data, but mixed chunks are special and
people seem to think this has its use cases.
Signed-off-by: NIlya Dryomov <idryomov@gmail.com>

Do not run sanity checks on all target profiles unless they all will be
used.  This came up because alloc_profile_is_valid() is now more strict
than it used to be.
Signed-off-by: NIlya Dryomov <idryomov@gmail.com>

Header file is not a good place to define functions.  This also moves a
call to alloc_profile_is_valid() down the stack and removes a redundant
check from __btrfs_alloc_chunk() - alloc_profile_is_valid() takes it
into account.
Signed-off-by: NIlya Dryomov <idryomov@gmail.com>

"0" is a valid value for an on-disk chunk profile, but it is not a valid
extended profile.  (We have a separate bit for single chunks in extended
case)

Also rename it to alloc_profile_is_valid() for clarity.
Signed-off-by: NIlya Dryomov <idryomov@gmail.com>

Add functions to abstract the conversion between chunk and extended
allocation profile formats and switch everybody to use them.
Signed-off-by: NIlya Dryomov <idryomov@gmail.com>

A few years ago the btrfs code to support blocks lager than
the page size was disabled to fix a few corner cases in the
page cache handling.  This fixes the code to properly support
large metadata blocks again.

Since current kernels will crash early and often with larger
metadata blocks, this adds an incompat bit so that older kernels
can't mount it.

This also does away with different blocksizes for nodes and leaves.
You get a single block size for all tree blocks.
Signed-off-by: NChris Mason <chris.mason@oracle.com>

 btrfs currently handles most errors with BUG_ON. This patch is a work-in-
 progress but aims to handle most errors other than internal logic
 errors and ENOMEM more gracefully.

 This iteration prevents most crashes but can run into lockups with
 the page lock on occasion when the timing "works out."
Signed-off-by: NJeff Mahoney <jeffm@suse.com>

btrfs_alloc_chunk() unconditionally BUGs on any error returned from
__finish_chunk_alloc() so there's no need for two BUG_ON lines. Remove the
one from __finish_chunk_alloc().
Signed-off-by: NMark Fasheh <mfasheh@suse.de>

We BUG_ON() error from add_extent_mapping(), but that error looks pretty
easy to bubble back up - as far as I can tell there have not been any
permanent modifications to fs state at that point.
Signed-off-by: NMark Fasheh <mfasheh@suse.de>

The only caller of btrfs_alloc_dev_extent() is __btrfs_alloc_chunk() which
already bugs on any error returned. We can remove the BUG_ON's in
btrfs_alloc_dev_extent() then since __btrfs_alloc_chunk() will "catch" them
anyway.
Signed-off-by: NMark Fasheh <mfasheh@suse.de>

All callers of __finish_chunk_alloc() BUG_ON() return value, so it's trivial
for us to always bubble up any errors caught in __finish_chunk_alloc() to be
caught there.
Signed-off-by: NMark Fasheh <mfasheh@suse.de>

Signed-off-by: NJeff Mahoney <jeffm@suse.com>

When we are setting up the mount, we close all the
devices that were not actually part of the metadata we found.

But, we don't make sure that one of those devices wasn't
fs_devices->latest_bdev, which means we can do a use after free
on the one we closed.

This updates latest_bdev as it goes.
Signed-off-by: NChris Mason <chris.mason@oracle.com>

This patch corrects error checking of lookup_extent_mapping().
Signed-off-by: NTsutomu Itoh <t-itoh@jp.fujitsu.com>

Raid array setup code creates an extent buffer in an usual way. When the
PAGE_CACHE_SIZE is > super block size, the extent pages are not marked
up-to-date, which triggers a WARN_ON in the following
write_extent_buffer call. Add an explicit up-to-date call to silence the
warning.
Signed-off-by: NDavid Sterba <dsterba@suse.cz>

system chunks by default are very small.  This makes them slightly
larger and also fixes the conditional checks to make sure we don't
allocate a billion of them at once.
Signed-off-by: NChris Mason <chris.mason@oracle.com>

Signed-off-by: NIlya Dryomov <idryomov@gmail.com>

Implement an ioctl for canceling restriper.  Currently we wait until
relocation of the current block group is finished, in future this can be
done by triggering a commit.  Balance item is deleted and no memory
about the interrupted balance is kept.
Signed-off-by: NIlya Dryomov <idryomov@gmail.com>

Implement an ioctl for pausing restriper.  This pauses the relocation,
but balance is still considered to be "in progress": balance item is
not deleted, other volume operations cannot be started, etc.  If paused
in the middle of profile changing operation we will continue making
allocations with the target profile.

Add a hook to close_ctree() to pause restriper and free its data
structures on unmount.  (It's safe to unmount when restriper is in
"paused" state, we will resume with the same parameters on the next
mount)
Signed-off-by: NIlya Dryomov <idryomov@gmail.com>

Since restriper kthread starts involuntarily on mount and can suck cpu
and memory bandwidth add a mount option to forcefully skip it.  The
restriper in that case hangs around in paused state and can be resumed
from userspace when it's convenient.
Signed-off-by: NIlya Dryomov <idryomov@gmail.com>

On mount, if balance item is found, resume balance in a separate
kernel thread.

Try to be smart to continue roughly where previous balance (or convert)
was interrupted.  For chunk types that were being converted to some
profile we turn on soft convert, in case of a simple balance we turn on
usage filter and relocate only less-than-90%-full chunks of that type.
These are just heuristics but they help quite a bit, and can be improved
in future.
Signed-off-by: NIlya Dryomov <idryomov@gmail.com>

Introduce a new btree objectid for storing balance item.  The reason is
to be able to resume restriper after a crash with the same parameters.
Balance item has a very high objectid and goes into tree of tree roots.

The key for the new item is as follows:

	[ BTRFS_BALANCE_OBJECTID ; BTRFS_BALANCE_ITEM_KEY ; 0 ]

Older kernels simply ignore it so it's safe to mount with an older
kernel and then go back to the newer one.
Signed-off-by: NIlya Dryomov <idryomov@gmail.com>

When doing convert from one profile to another if soft mode is on
restriper won't touch chunks that already have the profile we are
converting to.  This is useful if e.g. half of the FS was converted
earlier.

The soft mode switch is (like every other filter) per-type.  This means
that we can convert for example meta chunks the "hard" way while
converting data chunks selectively with soft switch.
Signed-off-by: NIlya Dryomov <idryomov@gmail.com>

Profile changing is done by launching a balance with
BTRFS_BALANCE_CONVERT bits set and target fields of respective
btrfs_balance_args structs initialized.  Profile reducing code in this
case will pick restriper's target profile if it's available instead of
doing a blind reduce.  If target profile is not yet available it goes
back to a plain reduce.
Signed-off-by: NIlya Dryomov <idryomov@gmail.com>

Select chunks which have at least one byte located inside a given
[vstart, vend) virtual address space range.
Signed-off-by: NIlya Dryomov <idryomov@gmail.com>

Select chunks which have at least one byte of at least one stripe
located on a device with devid X in a given [pstart,pend) physical
address range.

This filter only works when devid filter is turned on.
Signed-off-by: NIlya Dryomov <idryomov@gmail.com>

Relocate chunks which have at least one stripe located on a device with
devid X.
Signed-off-by: NIlya Dryomov <idryomov@gmail.com>

Select chunks that are less than X percent full.
Signed-off-by: NIlya Dryomov <idryomov@gmail.com>

Select chunks based on a given profile mask.
Signed-off-by: NIlya Dryomov <idryomov@gmail.com>

This allows to have a separate set of filters for each chunk type
(data,meta,sys).  The code however is generic and switch on chunk type
is only done once.

This commit also adds a type filter: it allows to balance for example
meta and system chunks w/o touching data ones.
Signed-off-by: NIlya Dryomov <idryomov@gmail.com>

Add basic restriper infrastructure: extended balancing ioctl and all
related ioctl data structures, add data structure for tracking
restriper's state to fs_info, etc.  The semantics of the old balancing
ioctl are fully preserved.

Explicitly disallow any volume operations when balance is in progress.
Signed-off-by: NIlya Dryomov <idryomov@gmail.com>