- 16 10月, 2007 1 次提交
-
-
由 Jaroslav Kysela 提交于
Signed-off-by: NJaroslav Kysela <perex@perex.cz>
-
- 10 10月, 2007 1 次提交
-
-
由 Jeff Garzik 提交于
Three main sets of changes: 1) dmi_get_system_info() return value should have been marked const, since callers should not be changing that data. 2) const-ify DMI internals, since DMI firmware tables should, whenever possible, be marked const to ensure we never ever write to that data area. 3) const-ify DMI API, to enable marking tables const where possible in low-level drivers. And if we're really lucky, this might enable some additional optimizations on the part of the compiler. The bulk of the changes are #2 and #3, which are interrelated. #1 could have been a separate patch, but it was so small compared to the others, it was easier to roll it into this changeset. Signed-off-by: NJeff Garzik <jgarzik@redhat.com>
-
- 12 9月, 2007 1 次提交
-
-
由 Bjorn Helgaas 提交于
If the quirk enables the SIR part of the SMCf010 device, the 8250 driver may claim it as a legacy ttyS device, which makes the legacy probe in the smsc-ircc2 driver fail. Signed-off-by: NBjorn Helgaas <bjorn.helgaas@hp.com> Cc: Andrey Borzenkov <arvidjaar@mail.ru> Cc: Michal Piotrowski <michal.k.k.piotrowski@gmail.com> Signed-off-by: NAndrew Morton <akpm@linux-foundation.org> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
- 24 8月, 2007 6 次提交
-
-
由 Bjorn Helgaas 提交于
Remove some null pointer checks. Null pointers in these areas indicate programming errors, and I think it's better to oops immediately rather than return an error that is easily ignored. Signed-off-by: NBjorn Helgaas <bjorn.helgaas@hp.com> Acked-by: NAdam Belay <abelay@novell.com> Signed-off-by: NLen Brown <len.brown@intel.com>
-
由 Bjorn Helgaas 提交于
We don't support building any part of PNP as a module (*drivers* can be modules, of course, but the PNP infrastructure itself can not). Since MODULE will never be defined, remove the ifdefs and dead code. Signed-off-by: NBjorn Helgaas <bjorn.helgaas@hp.com> Acked-by: NAdam Belay <abelay@novell.com> Signed-off-by: NLen Brown <len.brown@intel.com>
-
由 Bjorn Helgaas 提交于
ISAPNP_DEBUG isn't used at all. isapnp_detected is set but never read. So remove them both. Signed-off-by: NBjorn Helgaas <bjorn.helgaas@hp.com> Acked-by: NAdam Belay <abelay@novell.com> Signed-off-by: NLen Brown <len.brown@intel.com>
-
由 Bjorn Helgaas 提交于
Remove unnecessary casts of void pointers. Signed-off-by: NBjorn Helgaas <bjorn.helgaas@hp.com> Acked-by: NAdam Belay <abelay@novell.com> Signed-off-by: NLen Brown <len.brown@intel.com>
-
由 Bjorn Helgaas 提交于
No need for a temporary variable; just return the flags once we know them. Signed-off-by: NBjorn Helgaas <bjorn.helgaas@hp.com> Acked-by: NAdam Belay <abelay@novell.com> Signed-off-by: NLen Brown <len.brown@intel.com>
-
由 Bjorn Helgaas 提交于
More manual fixups after Lindent. No functional change. Signed-off-by: NBjorn Helgaas <bjorn.helgaas@hp.com> Acked-by: NAdam Belay <abelay@novell.com> Signed-off-by: NLen Brown <len.brown@intel.com>
-
- 30 7月, 2007 1 次提交
-
-
由 Len Brown 提交于
Restore the 2.6.22 CONFIG_ACPI_SLEEP build option, but now shadowing the new CONFIG_PM_SLEEP option. Signed-off-by: NLen Brown <len.brown@intel.com> [ Modified to work with the PM config setup changes. ] Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
- 27 7月, 2007 2 次提交
-
-
由 Bjorn Helgaas 提交于
These are manual fixups after running Lindent. No functional change. Signed-off-by: NBjorn Helgaas <bjorn.helgaas@hp.com> Cc: Len Brown <lenb@kernel.org> Cc: Adam Belay <ambx1@neo.rr.com> Signed-off-by: NAndrew Morton <akpm@linux-foundation.org> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
由 Bjorn Helgaas 提交于
Run Lindent on all PNP source files. Produced by: $ quilt new pnp-lindent $ find drivers/pnp -name \*.[ch] | xargs quilt add $ quilt add include/linux/{pnp.h,pnpbios.h} $ scripts/Lindent drivers/pnp/*.c drivers/pnp/*/*.c include/linux/pnp*.h $ quilt refresh --sort Signed-off-by: NBjorn Helgaas <bjorn.helgaas@hp.com> Cc: Len Brown <lenb@kernel.org> Cc: Adam Belay <ambx1@neo.rr.com> Signed-off-by: NAndrew Morton <akpm@linux-foundation.org> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
- 24 7月, 2007 1 次提交
-
-
由 Thomas Renninger 提交于
Modify modpost (file2alias.c) to add acpi*:XYZ0001: alias in modules.alias like: grep acpi /lib/modules/2.6.22-rc4-default/modules.alias alias acpi*:SNY5001:* sony_laptop alias acpi*:SNY6001:* sony_laptop for e.g. the sony_laptop module. This module matches against all ACPI devices with a HID or CID of SNY5001 or SNY6001 Export an uevent and modalias sysfs file containing the string: [MODALIAS=]acpi:PNP0C0C: additional CIDs are concatenated at the end. Signed-off-by: NThomas Renninger <trenn@suse.de> Signed-off-by: NKay Sievers <kay.sievers@vrfy.org> Signed-off-by: NLen Brown <len.brown@intel.com>
-
- 22 7月, 2007 1 次提交
-
-
由 Shaohua Li 提交于
applied after Rafel's 'PM: Update global suspend and hibernation operations framework' patch set Signed-off-by: NShaohua Li <shaohua.li@intel.com> Signed-off-by: NLen Brown <len.brown@intel.com>
-
- 20 7月, 2007 1 次提交
-
-
由 Yoann Padioleau 提交于
Transform some calls to kmalloc/memset to a single kzalloc (or kcalloc). Here is a short excerpt of the semantic patch performing this transformation: @@ type T2; expression x; identifier f,fld; expression E; expression E1,E2; expression e1,e2,e3,y; statement S; @@ x = - kmalloc + kzalloc (E1,E2) ... when != \(x->fld=E;\|y=f(...,x,...);\|f(...,x,...);\|x=E;\|while(...) S\|for(e1;e2;e3) S\) - memset((T2)x,0,E1); @@ expression E1,E2,E3; @@ - kzalloc(E1 * E2,E3) + kcalloc(E1,E2,E3) [akpm@linux-foundation.org: get kcalloc args the right way around] Signed-off-by: NYoann Padioleau <padator@wanadoo.fr> Cc: Richard Henderson <rth@twiddle.net> Cc: Ivan Kokshaysky <ink@jurassic.park.msu.ru> Acked-by: NRussell King <rmk@arm.linux.org.uk> Cc: Bryan Wu <bryan.wu@analog.com> Acked-by: NJiri Slaby <jirislaby@gmail.com> Cc: Dave Airlie <airlied@linux.ie> Acked-by: NRoland Dreier <rolandd@cisco.com> Cc: Jiri Kosina <jkosina@suse.cz> Acked-by: NDmitry Torokhov <dtor@mail.ru> Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org> Acked-by: NMauro Carvalho Chehab <mchehab@infradead.org> Acked-by: NPierre Ossman <drzeus-list@drzeus.cx> Cc: Jeff Garzik <jeff@garzik.org> Cc: "David S. Miller" <davem@davemloft.net> Acked-by: NGreg KH <greg@kroah.com> Cc: James Bottomley <James.Bottomley@steeleye.com> Cc: "Antonino A. Daplas" <adaplas@pol.net> Signed-off-by: NAndrew Morton <akpm@linux-foundation.org> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
- 18 7月, 2007 2 次提交
-
-
由 Jeremy Fitzhardinge 提交于
Rather than using a tri-state integer for the wait flag in call_usermodehelper_exec, define a proper enum, and use that. I've preserved the integer values so that any callers I've missed should still work OK. Signed-off-by: NJeremy Fitzhardinge <jeremy@xensource.com> Cc: James Bottomley <James.Bottomley@HansenPartnership.com> Cc: Randy Dunlap <randy.dunlap@oracle.com> Cc: Christoph Hellwig <hch@infradead.org> Cc: Andi Kleen <ak@suse.de> Cc: Paul Mackerras <paulus@samba.org> Cc: Johannes Berg <johannes@sipsolutions.net> Cc: Ralf Baechle <ralf@linux-mips.org> Cc: Bjorn Helgaas <bjorn.helgaas@hp.com> Cc: Joel Becker <joel.becker@oracle.com> Cc: Tony Luck <tony.luck@intel.com> Cc: Kay Sievers <kay.sievers@vrfy.org> Cc: Srivatsa Vaddagiri <vatsa@in.ibm.com> Cc: Oleg Nesterov <oleg@tv-sign.ru> Cc: David Howells <dhowells@redhat.com>
-
由 Rafael J. Wysocki 提交于
Currently, the freezer treats all tasks as freezable, except for the kernel threads that explicitly set the PF_NOFREEZE flag for themselves. This approach is problematic, since it requires every kernel thread to either set PF_NOFREEZE explicitly, or call try_to_freeze(), even if it doesn't care for the freezing of tasks at all. It seems better to only require the kernel threads that want to or need to be frozen to use some freezer-related code and to remove any freezer-related code from the other (nonfreezable) kernel threads, which is done in this patch. The patch causes all kernel threads to be nonfreezable by default (ie. to have PF_NOFREEZE set by default) and introduces the set_freezable() function that should be called by the freezable kernel threads in order to unset PF_NOFREEZE. It also makes all of the currently freezable kernel threads call set_freezable(), so it shouldn't cause any (intentional) change of behaviour to appear. Additionally, it updates documentation to describe the freezing of tasks more accurately. [akpm@linux-foundation.org: build fixes] Signed-off-by: NRafael J. Wysocki <rjw@sisk.pl> Acked-by: NNigel Cunningham <nigel@nigel.suspend2.net> Cc: Pavel Machek <pavel@ucw.cz> Cc: Oleg Nesterov <oleg@tv-sign.ru> Cc: Gautham R Shenoy <ego@in.ibm.com> Signed-off-by: NAndrew Morton <akpm@linux-foundation.org> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
- 17 7月, 2007 2 次提交
-
-
由 Jesper Juhl 提交于
In drivers/pnp/isapnp/core.c::isapnp_read_tag() there is a test of 'type' being == 0 a bit down in the function. That test doesn't make any sense. If 'type' could indeed be NULL, then the test happens way too late as we'd already have tried to dereference the pointer earlier and looking at the callers it also turns out that there is no way type can ever actually be NULL. So the test is completely pointless and should just be removed. Signed-off-by: NJesper Juhl <jesper.juhl@gmail.com> Signed-off-by: NAndrew Morton <akpm@linux-foundation.org> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
由 Jan Engelhardt 提交于
Use menuconfigs instead of menus, so the whole menu can be disabled at once instead of going through all options. Signed-off-by: NJan Engelhardt <jengelh@gmx.de> Cc: Adam Belay <ambx1@neo.rr.com> Cc: Bjorn Helgaas <bjorn.helgaas@hp.com> Signed-off-by: NAndrew Morton <akpm@linux-foundation.org> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
- 07 7月, 2007 1 次提交
-
-
由 Bjorn Helgaas 提交于
When we enable the SMCf010 IR device, the Toshiba Portege 4000 BIOS claims the device is working, but it really isn't configured correctly. The BIOS *will* configure it, but only if we call _SRS after (1) reversing the order of the SIR and FIR I/O port regions and (2) changing the IRQ from active-high to active-low. This patch addresses the 2.6.22 regression: "no irda0 interface (2.6.21 was OK), smsc does not find chip" I tested this on a Portege 4000. The smsc-ircc2 driver correctly detects the device, and "irattach irda0 -s && irdadump" shows transmitted and received packets. Signed-off-by: NBjorn Helgaas <bjorn.helgaas@hp.com> Cc: Andrey Borzenkov <arvidjaar@mail.ru> Cc: Samuel Ortiz <samuel@sortiz.org> Cc: "Linus Walleij (LD/EAB)" <linus.walleij@ericsson.com> Cc: Michal Piotrowski <michal.k.k.piotrowski@gmail.com> Cc: Adam Belay <ambx1@neo.rr.com> Signed-off-by: NAndrew Morton <akpm@linux-foundation.org> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
- 29 6月, 2007 1 次提交
-
-
由 Bjorn Helgaas 提交于
Some HP firmware leaves the SMCf010 IRDA device incompletely configured, or reports the wrong resources in _CRS. As a workaround, when we find such a device, try to auto-configure the device. This ignores the _CRS data, picks a config from _PRS, and runs _SRS to configure the device. This makes smsc-ircc2 work correctly with PNP resources (with no preconfiguration!) on all the machines I tested. I think Windows does something like this by default for all devices, so we should consider doing the same thing in Linux. This patch addresses part of the 2.6.22 regression: "no irda0 interface (2.6.21 was OK), smsc does not find chip" It fixes smsc-ircc2 PNP device detection on HP nc6000, nc6220, nw8000, nw8240, and possibly other machines. Signed-off-by: NBjorn Helgaas <bjorn.helgaas@hp.com> Cc: Samuel Ortiz <samuel@sortiz.org> Cc: "Linus Walleij (LD/EAB)" <linus.walleij@ericsson.com> Cc: Andrey Borzenkov <arvidjaar@mail.ru> Cc: Michal Piotrowski <michal.k.k.piotrowski@gmail.com> Cc: Adam Belay <ambx1@neo.rr.com> Signed-off-by: NAndrew Morton <akpm@linux-foundation.org> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
- 10 5月, 2007 1 次提交
-
-
由 Martin Schwidefsky 提交于
Add "depends on HAS_IOMEM" to a number of menus to make them disappear for s390 which does not have I/O memory. Signed-off-by: NMartin Schwidefsky <schwidefsky@de.ibm.com>
-
- 09 5月, 2007 5 次提交
-
-
由 Bjorn Helgaas 提交于
Some HP/Compaq firmware reports via ACPI that the SMCF010 IR device is enabled, but in fact, it leaves the device partly disabled. HP nw8240 BIOS 68DTV Ver. F.0F, released 9/15/2005 is one BIOS that has this problem. Signed-off-by: NBjorn Helgaas <bjorn.helgaas@hp.com> Cc: Keith Owens <kaos@ocs.com.au> Cc: Len Brown <lenb@kernel.org> Cc: Adam Belay <ambx1@neo.rr.com> Cc: Matthieu CASTET <castet.matthieu@free.fr> Cc: Jean Tourrilhes <jt@hpl.hp.com> Cc: Matthew Garrett <mjg59@srcf.ucam.org> Cc: Ville Syrjala <syrjala@sci.fi> Cc: Russell King <rmk+serial@arm.linux.org.uk> Cc: Samuel Ortiz <samuel@sortiz.org> Signed-off-by: NAndrew Morton <akpm@linux-foundation.org> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
由 Bjorn Helgaas 提交于
This series converts i386 and x86_64 legacy serial ports to be platform devices and prevents probing for them if we have PNP. This prevents double discovery, where a device was found both by the legacy probe and by 8250_pnp. This also prevents the serial driver from claiming IRDA devices (unless they have a UART PNP ID). The serial legacy probe sometimes assumed the wrong IRQ, so the user had to use "setserial" to fix it. Removing the need for setserial to make IRDA devices work seems good, but it does break some things. In particular, you may need to keep setserial from poking legacy UART stuff back in by doing something like "dpkg-reconfigure setserial" with the "kernel" option. Otherwise, the setserial-discovered "UART" will claim resources and prevent the IRDA driver from loading. This patch: If we can discover devices using PNP, we can skip some legacy probes. This flag ("pnp_platform_devices") indicates that PNPBIOS or PNPACPI is enabled and should tell us about builtin devices. Signed-off-by: NBjorn Helgaas <bjorn.helgaas@hp.com> Cc: Keith Owens <kaos@ocs.com.au> Cc: Len Brown <lenb@kernel.org> Cc: Adam Belay <ambx1@neo.rr.com> Cc: Matthieu CASTET <castet.matthieu@free.fr> Cc: Jean Tourrilhes <jt@hpl.hp.com> Cc: Matthew Garrett <mjg59@srcf.ucam.org> Cc: Ville Syrjala <syrjala@sci.fi> Cc: Russell King <rmk+serial@arm.linux.org.uk> Cc: Samuel Ortiz <samuel@sortiz.org> Signed-off-by: NAndrew Morton <akpm@linux-foundation.org> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
由 Eric W. Biederman 提交于
This patches modifies the pnpbios kernel thread to start with ktrhead_run not kernel_thread and deamonize. Doing this makes the code a little simpler and easier to maintain. Signed-off-by: NEric W. Biederman <ebiederm@xmission.com> Cc: Adam Belay <ambx1@neo.rr.com> Cc: Bjorn Helgaas <bjorn.helgaas@hp.com> Signed-off-by: NAndrew Morton <akpm@linux-foundation.org> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
由 David Brownell 提交于
Teach PNPACPI how to hook up its devices to their ACPI nodes, so that pnpdev->dev.archdata points to the parallel acpi device node. Previously this only worked for PCI, leaving a notable hole. Export "acpi_bus_type" so this can work. Remove some extraneous whitespace. Signed-off-by: NDavid Brownell <dbrownell@users.sourceforge.net> Cc: Adam Belay <ambx1@neo.rr.com> Cc: Bjorn Helgaas <bjorn.helgaas@hp.com> Cc: Len Brown <lenb@kernel.org> Cc: Greg KH <greg@kroah.com> Signed-off-by: NAndrew Morton <akpm@linux-foundation.org> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
由 David Brownell 提交于
PNP now initializes device dma masks, which prevents oopses when generic dma calls are made using pnp device nodes. This assumes PNP only uses ISA DMA, with 24 bit addresses; and that it's safe to init those masks for all devices (rather than finding out which devices have been assigned DMA channels, and handling only those). Signed-off-by: NDavid Brownell <dbrownell@users.sourceforge.net> Cc: Adam Belay <abelay@novell.com> Cc: Jaroslav Kysela <perex@suse.cz> Signed-off-by: NAndrew Morton <akpm@linux-foundation.org> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
- 28 4月, 2007 1 次提交
-
-
由 Greg Kroah-Hartman 提交于
The rwsem is not used to protect anything, so the use of it by the PNP subsystem isn't really useful, and it's doubtful if it really did anything or not. So I've removed it. Cc: Adam Belay <ambx1@neo.rr.com> Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>
-
- 03 4月, 2007 1 次提交
-
-
由 Petr Vandrovec 提交于
Change PnP resource handling code to use proper type for resource start and length. Fixes bogus regions reported in /proc/iomem. I've also made some pointer constant, as they are constant... Signed-off-by: NPetr Vandrovec <petr@vandrovec.name> Cc: Bjorn Helgaas <bjorn.helgaas@hp.com> Cc: Adam Belay <ambx1@neo.rr.com> Signed-off-by: NAndrew Morton <akpm@linux-foundation.org> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
- 17 3月, 2007 1 次提交
-
-
由 David Brownell 提交于
Make some normal code paths in PNP stop issuing syslog spam. Since PNP issues calls regardless of device capablities, it's no surprise when some of those devices don't support those calls! Signed-off-by: NDavid Brownell <dbrownell@users.sourceforge.net> Cc: Adam Belay <ambx1@neo.rr.com> Signed-off-by: NAndrew Morton <akpm@linux-foundation.org> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
- 09 3月, 2007 1 次提交
-
-
由 Michael Karcher 提交于
The PNPACPI resource flags were broken. This would apply to re-enabling a device any-time after boot, not just after resume from S3. http://bugzilla.kernel.org/show_bug.cgi?id=6316Acked-by: NShaohua Li <shaohua.li@intel.com> Signed-off-by: NLen Brown <len.brown@intel.com>
-
- 16 2月, 2007 1 次提交
-
-
由 Len Brown 提交于
We removed the ACPI motherboard driver which handled the ACPI=y, PNP=n case, so now we need to enforce that PNP & PNPACPI are always enabled for ACPI kernels. Most major distros ship this way this already. Cc: Bjorn Helgaas <bjorn.helgaas@hp.com> Signed-off-by: NLen Brown <len.brown@intel.com>
-
- 13 2月, 2007 1 次提交
-
-
由 Arjan van de Ven 提交于
Many struct file_operations in the kernel can be "const". Marking them const moves these to the .rodata section, which avoids false sharing with potential dirty data. In addition it'll catch accidental writes at compile time to these shared resources. Signed-off-by: NArjan van de Ven <arjan@linux.intel.com> Signed-off-by: NAndrew Morton <akpm@linux-foundation.org> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
- 12 2月, 2007 2 次提交
-
-
由 Robert P. J. Day 提交于
Delete the few remaining unnecessary calls to memset(0) after a call to kzalloc(). Signed-off-by: NRobert P. J. Day <rpjday@mindspring.com> Cc: Andi Kleen <ak@suse.de> Cc: Dmitry Torokhov <dtor@mail.ru> Cc: Adam Belay <ambx1@neo.rr.com> Signed-off-by: NAndrew Morton <akpm@linux-foundation.org> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
由 David Brownell 提交于
The PNP framework doesn't export "pnp_bus_type", which is an unfortunate exception to the policy followed by pretty much every other bus. I noticed this when I had to find a device in order to provide its platform_data. Note that per advice from Arjan, the "export" scope has been been minimized to avoid the hundred-plus bytes needed to support access from modules. In this case, the symbol is only needed by statically linked kernel code that lives outside the drivers/pnp directory. Signed-off-by: NDavid Brownell <dbrownell@users.sourceforge.net> Cc: Adam Belay <ambx1@neo.rr.com> Signed-off-by: NAndrew Morton <akpm@linux-foundation.org> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
- 26 1月, 2007 3 次提交
-
-
由 Bjorn Helgaas 提交于
PNPACPI is pretty widely used and seems fairly stable, so remove the dependency on EXPERIMENTAL. Signed-off-by: NBjorn Helgaas <bjorn.helgaas@hp.com> Cc: Adam Belay <ambx1@neo.rr.com> Signed-off-by: NAndrew Morton <akpm@osdl.org> Signed-off-by: NLen Brown <len.brown@intel.com>
-
由 Bjorn Helgaas 提交于
No functional change. Signed-off-by: NBjorn Helgaas <bjorn.helgaas@hp.com> Signed-off-by: NLen Brown <len.brown@intel.com>
-
由 Bjorn Helgaas 提交于
Most x86 boxes have no iomem system board resources, but some ia64 boxes do. Signed-off-by: NBjorn Helgaas <bjorn.helgaas@hp.com> Signed-off-by: NLen Brown <len.brown@intel.com>
-
- 14 12月, 2006 2 次提交
-
-
由 Robert P. J. Day 提交于
Run this: #!/bin/sh for f in $(grep -Erl "\([^\)]*\) *k[cmz]alloc" *) ; do echo "De-casting $f..." perl -pi -e "s/ ?= ?\([^\)]*\) *(k[cmz]alloc) *\(/ = \1\(/" $f done And then go through and reinstate those cases where code is casting pointers to non-pointers. And then drop a few hunks which conflicted with outstanding work. Cc: Russell King <rmk@arm.linux.org.uk>, Ian Molton <spyro@f2s.com> Cc: Mikael Starvik <starvik@axis.com> Cc: Yoshinori Sato <ysato@users.sourceforge.jp> Cc: Roman Zippel <zippel@linux-m68k.org> Cc: Geert Uytterhoeven <geert@linux-m68k.org> Cc: Ralf Baechle <ralf@linux-mips.org> Cc: Paul Mackerras <paulus@samba.org> Cc: Kyle McMartin <kyle@mcmartin.ca> Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org> Cc: Martin Schwidefsky <schwidefsky@de.ibm.com> Cc: "David S. Miller" <davem@davemloft.net> Cc: Jeff Dike <jdike@addtoit.com> Cc: Greg KH <greg@kroah.com> Cc: Jens Axboe <jens.axboe@oracle.com> Cc: Paul Fulghum <paulkf@microgate.com> Cc: Alan Cox <alan@lxorguk.ukuu.org.uk> Cc: Karsten Keil <kkeil@suse.de> Cc: Mauro Carvalho Chehab <mchehab@infradead.org> Cc: Jeff Garzik <jeff@garzik.org> Cc: James Bottomley <James.Bottomley@steeleye.com> Cc: Ian Kent <raven@themaw.net> Cc: Steven French <sfrench@us.ibm.com> Cc: David Woodhouse <dwmw2@infradead.org> Cc: Neil Brown <neilb@cse.unsw.edu.au> Cc: Jaroslav Kysela <perex@suse.cz> Cc: Takashi Iwai <tiwai@suse.de> Signed-off-by: NAndrew Morton <akpm@osdl.org> Signed-off-by: NLinus Torvalds <torvalds@osdl.org>
-
由 Robert P. J. Day 提交于
All kcalloc() calls of the form "kcalloc(1,...)" are converted to the equivalent kzalloc() calls, and a few kcalloc() calls with the incorrect ordering of the first two arguments are fixed. Signed-off-by: NRobert P. J. Day <rpjday@mindspring.com> Cc: Jeff Garzik <jeff@garzik.org> Cc: Alan Cox <alan@lxorguk.ukuu.org.uk> Cc: Dominik Brodowski <linux@dominikbrodowski.net> Cc: Adam Belay <ambx1@neo.rr.com> Cc: James Bottomley <James.Bottomley@steeleye.com> Cc: Greg KH <greg@kroah.com> Cc: Mark Fasheh <mark.fasheh@oracle.com> Cc: Trond Myklebust <trond.myklebust@fys.uio.no> Cc: Neil Brown <neilb@suse.de> Signed-off-by: NAndrew Morton <akpm@osdl.org> Signed-off-by: NLinus Torvalds <torvalds@osdl.org>
-