- 13 12月, 2016 1 次提交
-
-
由 Yunlei He 提交于
This patch fix a missing size change in f2fs_setattr Signed-off-by: NYunlei He <heyunlei@huawei.com> Reviewed-by: NChao Yu <yuchao0@huawei.com> Signed-off-by: NJaegeuk Kim <jaegeuk@kernel.org>
-
- 08 12月, 2016 3 次提交
-
-
由 Jaegeuk Kim 提交于
f2fs_sync_file() remount_ro - f2fs_readonly - destroy_flush_cmd_control - f2fs_issue_flush - no fcc pointer! So, this patch doesn't free fcc in this case, but just stop its kernel thread which sends flush commands. Signed-off-by: NJaegeuk Kim <jaegeuk@kernel.org>
-
由 Jaegeuk Kim 提交于
This fixes missing freeing meta pages in the error case. Tested-by: NEric Biggers <ebiggers@google.com> Signed-off-by: NJaegeuk Kim <jaegeuk@kernel.org>
-
由 Jaegeuk Kim 提交于
Previous mkfs.f2fs allows small partition inappropriately, so f2fs should detect that as well. Refer this in f2fs-tools. mkfs.f2fs: detect small partition by overprovision ratio and # of segments Reported-and-Tested-by: NEric Biggers <ebiggers@google.com> Signed-off-by: NJaegeuk Kim <jaegeuk@kernel.org>
-
- 06 12月, 2016 2 次提交
-
-
由 Jaegeuk Kim 提交于
The sync_fs in f2fs_balance_fs_bg must avoid interrupting current user requests. Signed-off-by: NJaegeuk Kim <jaegeuk@kernel.org>
-
由 Jaegeuk Kim 提交于
This reverts commit 1beba1b3. The perpcu_counter doesn't provide atomicity in single core and consume more DRAM. That incurs fs_mark test failure due to ENOMEM. Cc: stable@vger.kernel.org # 4.7+ Signed-off-by: NJaegeuk Kim <jaegeuk@kernel.org>
-
- 30 11月, 2016 2 次提交
-
-
由 Chao Yu 提交于
We should use AOP_WRITEPAGE_ACTIVATE when we bypass writing pages. Signed-off-by: NChao Yu <yuchao0@huawei.com> Signed-off-by: NMiao Xie <miaoxie@huawei.com> Signed-off-by: NJaegeuk Kim <jaegeuk@kernel.org>
-
由 Jaegeuk Kim 提交于
If a file needs to keep its i_size by fallocate, we need to turn off auto recovery during roll-forward recovery. This will resolve the below scenario. 1. xfs_io -f /mnt/f2fs/file -c "pwrite 0 4096" -c "fsync" 2. xfs_io -f /mnt/f2fs/file -c "falloc -k 4096 4096" -c "fsync" 3. md5sum /mnt/f2fs/file; 4. godown /mnt/f2fs/ 5. umount /mnt/f2fs/ 6. mount -t f2fs /dev/sdx /mnt/f2fs 7. md5sum /mnt/f2fs/file Reported-by: NChao Yu <chao@kernel.org> Signed-off-by: NJaegeuk Kim <jaegeuk@kernel.org>
-
- 29 11月, 2016 1 次提交
-
-
由 Jaegeuk Kim 提交于
We don't guarantee cp_addr is fixed by cp_version. This is to sync with f2fs-tools. Cc: stable@vger.kernel.org Signed-off-by: NJaegeuk Kim <jaegeuk@kernel.org>
-
- 26 11月, 2016 17 次提交
-
-
由 Arnd Bergmann 提交于
The addition of multiple-device support broke CONFIG_BLK_DEV_ZONED on 32-bit machines because of a 64-bit division: fs/f2fs/f2fs.o: In function `__issue_discard_async': extent_cache.c:(.text.__issue_discard_async+0xd4): undefined reference to `__aeabi_uldivmod' Fortunately, bdev_zone_size() is guaranteed to return a power-of-two number, so we can replace the % operator with a cheaper bit mask. Fixes: 792b84b74b54 ("f2fs: support multiple devices") Signed-off-by: NArnd Bergmann <arnd@arndb.de> Signed-off-by: NJaegeuk Kim <jaegeuk@kernel.org>
-
由 Nicolai Stange 提交于
The struct file_operations instance serving the f2fs/status debugfs file lacks an initialization of its ->owner. This means that although that file might have been opened, the f2fs module can still get removed. Any further operation on that opened file, releasing included, will cause accesses to unmapped memory. Indeed, Mike Marshall reported the following: BUG: unable to handle kernel paging request at ffffffffa0307430 IP: [<ffffffff8132a224>] full_proxy_release+0x24/0x90 <...> Call Trace: [] __fput+0xdf/0x1d0 [] ____fput+0xe/0x10 [] task_work_run+0x8e/0xc0 [] do_exit+0x2ae/0xae0 [] ? __audit_syscall_entry+0xae/0x100 [] ? syscall_trace_enter+0x1ca/0x310 [] do_group_exit+0x44/0xc0 [] SyS_exit_group+0x14/0x20 [] do_syscall_64+0x61/0x150 [] entry_SYSCALL64_slow_path+0x25/0x25 <...> ---[ end trace f22ae883fa3ea6b8 ]--- Fixing recursive fault but reboot is needed! Fix this by initializing the f2fs/status file_operations' ->owner with THIS_MODULE. This will allow debugfs to grab a reference to the f2fs module upon any open on that file, thus preventing it from getting removed. Fixes: 902829aa ("f2fs: move proc files to debugfs") Reported-by: NMike Marshall <hubcap@omnibond.com> Reported-by: NMartin Brandenburg <martin@omnibond.com> Cc: stable@vger.kernel.org Signed-off-by: NNicolai Stange <nicstange@gmail.com> Signed-off-by: NJaegeuk Kim <jaegeuk@kernel.org>
-
由 Chao Yu 提交于
While calculating inode count that we can create at most in the left space, we should consider space which data/node blocks occupied, since we create data/node mixly in main area. So fix the wrong calculation in ->statfs. Signed-off-by: NChao Yu <yuchao0@huawei.com> Signed-off-by: NJaegeuk Kim <jaegeuk@kernel.org>
-
由 Geliang Tang 提交于
Drop duplicate header timer.h from segment.c. Signed-off-by: NGeliang Tang <geliangtang@gmail.com> Signed-off-by: NJaegeuk Kim <jaegeuk@kernel.org>
-
由 Jaegeuk Kim 提交于
If i_size is not aligned to the f2fs's block size, we should not skip inode update during fsync. Signed-off-by: NJaegeuk Kim <jaegeuk@kernel.org>
-
由 Jaegeuk Kim 提交于
If i_size is already valid during roll_forward recovery, we should not update it according to the block alignment. Signed-off-by: NJaegeuk Kim <jaegeuk@kernel.org>
-
由 Chao Yu 提交于
For below two cases, we can't guarantee data consistence: a) 1. xfs_io "pwrite 0 4195328" "fsync" 2. xfs_io "pwrite 4195328 1024" "fdatasync" 3. godown 4. umount & mount --> isize we updated before fdatasync won't be recovered b) 1. xfs_io "pwrite -S 0xcc 0 4202496" "fsync" 2. xfs_io "fpunch 4194304 4096" "fdatasync" 3. godown 4. umount & mount --> dnode we punched before fdatasync won't be recovered The reason is that normally fdatasync won't be aware of modification of metadata in file, e.g. isize changing, dnode updating, so in ->fsync we will skip flushing node pages for above cases, result in making fdatasynced file being lost during recovery. Currently we have introduced DIRTY_META global list in sbi for tracking dirty inode selectively, so in fdatasync we can choose to flush nodes depend on dirty state of current inode in the list. Signed-off-by: NChao Yu <yuchao0@huawei.com> Signed-off-by: NJaegeuk Kim <jaegeuk@kernel.org>
-
由 Chao Yu 提交于
Thread A Thread B Thread C - f2fs_create - f2fs_new_inode - f2fs_lock_op - alloc_nid alloc last nid - f2fs_unlock_op - f2fs_create - f2fs_new_inode - f2fs_lock_op - alloc_nid as node count still not be increased, we will loop in alloc_nid - f2fs_write_node_pages - f2fs_balance_fs_bg - f2fs_sync_fs - write_checkpoint - block_operations - f2fs_lock_all - f2fs_lock_op While creating new inode, we do not allocate and account nid atomically, so that when there is almost no free nids left, we may encounter deadloop like above stack. In order to avoid that, reuse nm_i::available_nids for accounting free nids and make nid allocation and counting being atomical during node creation. Signed-off-by: NChao Yu <yuchao0@huawei.com> Signed-off-by: NJaegeuk Kim <jaegeuk@kernel.org>
-
由 Yunlei He 提交于
Thread A Thread B - write_checkpoint - block_operations -blk_start_plug -sync_node_pages - f2fs_do_sync_file - fsync_node_pages - f2fs_wait_on_page_writeback Thread A wait for global F2FS_DIRTY_NODES decreased to zero, it start a plug list, some requests have been added to this list. Thread B lock one dirty node page, and wait this page write back. But this page has been in plug list of thread A with PG_writeback flag. Thread A keep on running and its plug list has no chance to finish, so it seems a deadlock between cp and fsync path. This patch add a wait on page write back before set node page dirty to avoid this problem. Signed-off-by: NYunlei He <heyunlei@huawei.com> Signed-off-by: NPengyang Hou <houpengyang@huawei.com> Reviewed-by: NChao Yu <yuchao0@huawei.com> Signed-off-by: NJaegeuk Kim <jaegeuk@kernel.org>
-
由 Chao Yu 提交于
Normally, while committing checkpoint, we will wait on all pages to be writebacked no matter the page is data or metadata, so in scenario where there are lots of data IO being submitted with metadata, we may suffer long latency for waiting writeback during checkpoint. Indeed, we only care about persistence for pages with metadata, but not pages with data, as file system consistent are only related to metadate, so in order to avoid encountering long latency in above scenario, let's recognize and reference metadata in submitted IOs, wait writeback only for metadatas. Signed-off-by: NChao Yu <yuchao0@huawei.com> Signed-off-by: NJaegeuk Kim <jaegeuk@kernel.org>
-
由 Jaegeuk Kim 提交于
Previously, written_valid_blocks was got by ckpt->valid_block_count. But if the last checkpoint has some NEW_ADDR due to power-cut, we can get wrong value. Fix it to get the number from actual written block count from sit entries. Signed-off-by: NJaegeuk Kim <jaegeuk@kernel.org>
-
由 Jaegeuk Kim 提交于
If many threads hit has_not_enough_free_secs() in f2fs_balance_fs() at the same time, all the threads would do FG_GC or BG_GC. In this critical path, we totally don't need to do BG_GC at all. Let's avoid that. Signed-off-by: NJaegeuk Kim <jaegeuk@kernel.org>
-
由 Jaegeuk Kim 提交于
In direct_IO path of f2fs_file_write_iter(), 1. f2fs_preallocate_blocks(F2FS_GET_BLOCK_PRE_DIO) -> allocate LBA X 2. f2fs_direct_IO() -> return 0; Then, f2fs_write_data_page() will allocate another LBA X+1. This makes EIO triggered by HM-SMR. Reviewed-by: NChao Yu <yuchao0@huawei.com> Signed-off-by: NJaegeuk Kim <jaegeuk@kernel.org>
-
由 Jaegeuk Kim 提交于
This patch has no functional change. Signed-off-by: NJaegeuk Kim <jaegeuk@kernel.org>
-
由 Jaegeuk Kim 提交于
This patch implements multiple devices support for f2fs. Given multiple devices by mkfs.f2fs, f2fs shows them entirely as one big volume under one f2fs instance. Internal block management is very simple, but we will modify block allocation and background GC policy to boost IO speed by exploiting them accoording to each device speed. Signed-off-by: NJaegeuk Kim <jaegeuk@kernel.org>
-
由 Jaegeuk Kim 提交于
We can allow dio reads for LFS mode, while doing buffered writes for dio writes. Reviewed-by: NChao Yu <yuchao0@huawei.com> Signed-off-by: NJaegeuk Kim <jaegeuk@kernel.org>
-
由 Jaegeuk Kim 提交于
Now we don't need to be too much careful about storage alignment for dio, since its speed becomes quite fast and we'd better avoid any misalignment first. Revert: 38aa0889 (f2fs: align direct_io'ed data to section) Reviewed-by: NChao Yu <yuchao0@huawei.com> Signed-off-by: NJaegeuk Kim <jaegeuk@kernel.org>
-
- 24 11月, 2016 14 次提交
-
-
由 Yunlei He 提交于
If one block has been to written to a new place, just return in move data process. This patch check it again with holding page lock. Signed-off-by: NYunlei He <heyunlei@huawei.com> Signed-off-by: NJaegeuk Kim <jaegeuk@kernel.org>
-
由 Chao Yu 提交于
i_times of inode will be set with current system time which can be configured through 'date', so it's not safe to judge dnode block as garbage data or unchanged inode depend on i_times. Now, we have used enhanced 'cp_ver + cp' crc method to verify valid dnode block, so I expect recoverying invalid dnode is almost not possible. This reverts commit 807b1e1c. Signed-off-by: NChao Yu <yuchao0@huawei.com> Signed-off-by: NJaegeuk Kim <jaegeuk@kernel.org>
-
由 Jaegeuk Kim 提交于
The generic freeze_super() calls sync_filesystems() before f2fs_freeze(). So, basically we don't need to do checkpoint in f2fs_freeze(). But, in xfs/068, it triggers circular locking problem below due to gc_mutex for checkpoint. ====================================================== [ INFO: possible circular locking dependency detected ] 4.9.0-rc1+ #132 Tainted: G OE ------------------------------------------------------- 1. wait for __sb_start_write() by [<ffffffff9845f353>] dump_stack+0x85/0xc2 [<ffffffff980e80bf>] print_circular_bug+0x1cf/0x230 [<ffffffff980eb4d0>] __lock_acquire+0x19e0/0x1bc0 [<ffffffff980ebdcb>] lock_acquire+0x11b/0x220 [<ffffffffc08c7c3b>] ? f2fs_drop_inode+0x9b/0x160 [f2fs] [<ffffffff9826bdd0>] __sb_start_write+0x130/0x200 [<ffffffffc08c7c3b>] ? f2fs_drop_inode+0x9b/0x160 [f2fs] [<ffffffffc08c7c3b>] f2fs_drop_inode+0x9b/0x160 [f2fs] [<ffffffff98289991>] iput+0x171/0x2c0 [<ffffffffc08cfccf>] f2fs_sync_inode_meta+0x3f/0xf0 [f2fs] [<ffffffffc08cfe04>] block_operations+0x84/0x110 [f2fs] [<ffffffffc08cff78>] write_checkpoint+0xe8/0xf20 [f2fs] [<ffffffff980e979d>] ? trace_hardirqs_on+0xd/0x10 [<ffffffffc08c6de9>] ? f2fs_sync_fs+0x79/0x190 [f2fs] [<ffffffff9803e9d9>] ? sched_clock+0x9/0x10 [<ffffffffc08c6de9>] ? f2fs_sync_fs+0x79/0x190 [f2fs] [<ffffffffc08c6df5>] f2fs_sync_fs+0x85/0x190 [f2fs] [<ffffffff982a4f90>] ? do_fsync+0x70/0x70 [<ffffffff982a4f90>] ? do_fsync+0x70/0x70 [<ffffffff982a4fb0>] sync_fs_one_sb+0x20/0x30 [<ffffffff9826ca3e>] iterate_supers+0xae/0x100 [<ffffffff982a50b5>] sys_sync+0x55/0x90 [<ffffffff9890b345>] entry_SYSCALL_64_fastpath+0x23/0xc6 2. wait for sbi->gc_mutex by [<ffffffff980ebdcb>] lock_acquire+0x11b/0x220 [<ffffffff989063d6>] mutex_lock_nested+0x76/0x3f0 [<ffffffffc08c6de9>] f2fs_sync_fs+0x79/0x190 [f2fs] [<ffffffffc08c7a6c>] f2fs_freeze+0x1c/0x20 [f2fs] [<ffffffff9826b6ef>] freeze_super+0xcf/0x190 [<ffffffff9827eebc>] do_vfs_ioctl+0x53c/0x6a0 [<ffffffff9827f099>] SyS_ioctl+0x79/0x90 [<ffffffff9890b345>] entry_SYSCALL_64_fastpath+0x23/0xc6 Signed-off-by: NJaegeuk Kim <jaegeuk@kernel.org>
-
由 Jaegeuk Kim 提交于
Previously, we assigned CURSEG_WARM_DATA for direct_io, but if we have two or four logs, we do not use that type at all. Let's fix it. Signed-off-by: NJaegeuk Kim <jaegeuk@kernel.org>
-
由 Chao Yu 提交于
Shouldn't update in-memory i_atime with on-disk i_mtime of inode when recovering inode. Shuoran found this bug which is hidden for a long time, honour is belong to him. Signed-off-by: NShuoran Liu <liushuoran@huawei.com> Signed-off-by: NChao Yu <yuchao0@huawei.com> Signed-off-by: NJaegeuk Kim <jaegeuk@kernel.org>
-
由 Chao Yu 提交于
We should record updating status of inode only for living inode, for those unlinked inode it needs to clear its ino cache, otherwise after the ino was been reused, it will cause unneeded node page writing during ->fsync. Signed-off-by: NChao Yu <yuchao0@huawei.com> Signed-off-by: NJaegeuk Kim <jaegeuk@kernel.org>
-
由 Damien Le Moal 提交于
Similarly to the regular discard, trace zone reset events. Signed-off-by: NDamien Le Moal <damien.lemoal@wdc.com> Signed-off-by: NJaegeuk Kim <jaegeuk@kernel.org>
-
由 Damien Le Moal 提交于
When a zoned block device is mounted, discarding sections contained in sequential zones must reset the zone write pointer. For sections contained in conventional zones, the regular discard is used if the drive supports it. Signed-off-by: NDamien Le Moal <damien.lemoal@wdc.com> Signed-off-by: NJaegeuk Kim <jaegeuk@kernel.org>
-
由 Damien Le Moal 提交于
With the zoned block device feature enabled, section discard need to do a zone reset for sections contained in sequential zones, and a regular discard (if supported) for sections stored in conventional zones. Avoid the need for a costly report zones to obtain a section zone type when discarding it by caching the types of the device zones in the super block information. This cache is initialized at mount time for mounts with the zoned block device feature enabled. Signed-off-by: NDamien Le Moal <damien.lemoal@wdc.com> Signed-off-by: NJaegeuk Kim <jaegeuk@kernel.org>
-
由 Damien Le Moal 提交于
The LFS mode is mandatory for host-managed zoned block devices as update in place optimizations are not possible for segments in sequential zones. Signed-off-by: NDamien Le Moal <damien.lemoal@wdc.com> Signed-off-by: NJaegeuk Kim <jaegeuk@kernel.org>
-
由 Damien Le Moal 提交于
Zone write pointer reset acts as discard for zoned block devices. So if the zoned block device feature is enabled, always declare that discard is enabled, even if the device does not actually support the command. For the same reason, prevent the use the "nodicard" mount option. Signed-off-by: NDamien Le Moal <damien.lemoal@wdc.com> Signed-off-by: NJaegeuk Kim <jaegeuk@kernel.org>
-
由 Damien Le Moal 提交于
For zoned block devices, discard is replaced by zone reset. So do not warn if the device does not supports discard. Signed-off-by: NDamien Le Moal <damien.lemoal@wdc.com> Signed-off-by: NJaegeuk Kim <jaegeuk@kernel.org>
-
由 Damien Le Moal 提交于
The F2FS_FEATURE_BLKZONED feature indicates that the drive was formatted with zone alignment optimization. This is optional for host-aware devices, but mandatory for host-managed zoned block devices. So check that the feature is set in this latter case. Signed-off-by: NDamien Le Moal <damien.lemoal@wdc.com> Signed-off-by: NJaegeuk Kim <jaegeuk@kernel.org>
-
由 Damien Le Moal 提交于
SMR stands for "Shingled Magnetic Recording" which makes sense only for hard disk drives (spinning rust). The ZBC/ZAC standards enable management of SMR disks, but solid state drives may also support those standards. So rename the HMSMR feature to BLKZONED to avoid a HDD centric terminology. For the same reason, rename f2fs_sb_mounted_hmsmr to f2fs_sb_mounted_blkzoned. Signed-off-by: NDamien Le Moal <damien.lemoal@wdc.com> Signed-off-by: NJaegeuk Kim <jaegeuk@kernel.org>
-