It all operates on the evsels in the session's evlist, so move it to the
evlist layer to make it useful to tools not using perf_session, just
evlists, like 'perf trace' in live mode.

Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Link: https://lkml.kernel.org/n/tip-9oc53gnfi53vg82fvolkm85g@git.kernel.orgSigned-off-by: NArnaldo Carvalho de Melo <acme@redhat.com>

Just read it so that later on the per arch init routine can use it,
e.g. x86__annotate_init().

When using a perf.data file this is obtained from a header that was put
there by 'perf record', and then it may be for another machine, another
arch.

Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Link: https://lkml.kernel.org/n/tip-4t4n3o8l8s0tc2b1pq53hyr4@git.kernel.orgSigned-off-by: NArnaldo Carvalho de Melo <acme@redhat.com>

In 'perf top' we use that cpuid when initializing the per arch
annotation init routines (e.g. x86__annotate_init()) and in that case
(live mode, 'perf top') we need to obtain it from the running machine,
not from a perf.data file header.

Provide a means to do that. Will be used by 'perf top' in a followup
patch.

Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Link: https://lkml.kernel.org/n/tip-h2wb3sx7u7znx6lqfezrh7ca@git.kernel.orgSigned-off-by: NArnaldo Carvalho de Melo <acme@redhat.com>

Return errno when open_memstream() fails and add two new speciall error
codes for when an invalid, non BPF file or one without BTF is passed to
symbol__disassemble_bpf(), so that its callers can rely on
symbol__strerror_disassemble() to convert that to a human readable error
message that can help figure out what is wrong, with hints even.

Cc: Russell King - ARM Linux admin <linux@armlinux.org.uk>
Cc: Song Liu <songliubraving@fb.com>
Cc: Alexei Starovoitov <ast@kernel.org>
Cc: Daniel Borkmann <daniel@iogearbox.net>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>,
Cc: Will Deacon <will@kernel.org>
Link: https://lkml.kernel.org/n/tip-usevw9r2gcipfcrbpaueurw0@git.kernel.orgSigned-off-by: NArnaldo Carvalho de Melo <acme@redhat.com>

We should return errno or the annotation extra range understood by
symbol__strerror_disassemble() instead of -1, fix it, returning ENOMEM
instead.
Reported-by: NRussell King - ARM Linux admin <linux@armlinux.org.uk>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>,
Cc: Will Deacon <will@kernel.org>
Link: https://lkml.kernel.org/n/tip-8of1cmj3rz0mppfcshc9bbqq@git.kernel.orgSigned-off-by: NArnaldo Carvalho de Melo <acme@redhat.com>

They are called from symbol__annotate() and to propagate errors that can
help understand the problem make them return what
symbol__strerror_disassemble() known, i.e. errno codes and other
annotation specific errors in a special, out of errnos, range.
Reported-by: NRussell King - ARM Linux admin <linux@armlinux.org.uk>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>,
Cc: Will Deacon <will@kernel.org>
Link: https://lkml.kernel.org/n/tip-pqx7srcv7tixgid251aeboj6@git.kernel.orgSigned-off-by: NArnaldo Carvalho de Melo <acme@redhat.com>

We were just returning -1 in symbol__annotate() when symbol__annotate()
failed, propagate its error as it is used later to pass to
symbol__strerror_disassemble() to present a error message to the user,
that in some cases were getting:

  "Invalid -1 error code"

Fix it to propagate the error.
Reported-by: NRussell King - ARM Linux admin <linux@armlinux.org.uk>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>,
Cc: Will Deacon <will@kernel.org>
Link: https://lkml.kernel.org/n/tip-0tj89rs9g7nbcyd5skadlvuu@git.kernel.orgSigned-off-by: NArnaldo Carvalho de Melo <acme@redhat.com>

Callers of symbol__annotate() expect a errno value or some other
extended error value range in symbol__strerror_disassemble() to
convert to a proper error string, fix it when propagating a failure to
find the arch specific annotation routines via arch__find(arch_name).
Reported-by: NRussell King - ARM Linux admin <linux@armlinux.org.uk>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>,
Cc: Will Deacon <will@kernel.org>
Link: https://lkml.kernel.org/n/tip-o0k6dw7cas0vvmjjvgsyvu1i@git.kernel.orgSigned-off-by: NArnaldo Carvalho de Melo <acme@redhat.com>

The callers of symbol__annotate2() use symbol__strerror_disassemble() to
convert its failure returns into a human readable string, so
propagate error values from functions it calls, starting with
perf_env__arch() that when fails the right thing to do is to look at
'errno' to see why its possible call to uname() failed.
Reported-by: NRussell King - ARM Linux admin <linux@armlinux.org.uk>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>,
Cc: Will Deacon <will@kernel.org>
Link: https://lkml.kernel.org/n/tip-it5d83kyusfhb1q1b0l4pxzs@git.kernel.orgSigned-off-by: NArnaldo Carvalho de Melo <acme@redhat.com>

I.e. if evsel->evlist or evsel->evlist->env isn't set, return the
environment for the running machine, as that would be set if reading
from a perf.data file.

Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Link: https://lkml.kernel.org/n/tip-uqq4grmhbi12rwb0lfpo6lfu@git.kernel.orgSigned-off-by: NArnaldo Carvalho de Melo <acme@redhat.com>

For consistency, propagate the exact cause for get_cpuid() to have
failed.

Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Link: https://lkml.kernel.org/n/tip-9ig269f7ktnhh99g4l15vpu2@git.kernel.orgSigned-off-by: NArnaldo Carvalho de Melo <acme@redhat.com>

The Intel fixed counters use a special table to override the JSON
information.

During this override the period information from the JSON file got
dropped, which results in inst_retired.any and similar running with
frequency mode instead of a period.

Just specify the expected period in the table.
Signed-off-by: NAndi Kleen <ak@linux.intel.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Link: http://lore.kernel.org/lkml/20190927233546.11533-2-andi@firstfloor.orgSigned-off-by: NArnaldo Carvalho de Melo <acme@redhat.com>

When the LBR data and the instructions in a binary do not match the loop
printing instructions could get confused and print a long stream of
bogus <bad> instructions.

The problem was that if the instruction decoder cannot decode an
instruction it ilen wasn't initialized, so the loop going through the
basic block would continue with the previous value.

Harden the code to avoid such problems:

- Make sure ilen is always freshly initialized and is 0 for bad
  instructions.

- Do not overrun the code buffer while printing instructions

- Print a warning message if the final jump is not on an instruction
  boundary.
Signed-off-by: NAndi Kleen <ak@linux.intel.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Link: http://lore.kernel.org/lkml/20190927233546.11533-1-andi@firstfloor.orgSigned-off-by: NArnaldo Carvalho de Melo <acme@redhat.com>

Specification claims latest version of jitdump file format is 2. Current
jit dump reading code treats 1 as the latest version.

Correct spec to match code.

The original language made it unclear the value to be written in the
magic field.

Revise language that the writer always writes the same value. Specify
that the reader uses the value to detect endian mismatches.
Signed-off-by: NSteve MacLean <Steve.MacLean@Microsoft.com>
Acked-by: NStephane Eranian <eranian@google.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: Brian Robbins <brianrob@microsoft.com>
Cc: Davidlohr Bueso <dave@stgolabs.net>
Cc: Eric Saint-Etienne <eric.saint.etienne@oracle.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: John Keeping <john@metanate.com>
Cc: John Salem <josalem@microsoft.com>
Cc: Leo Yan <leo.yan@linaro.org>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Song Liu <songliubraving@fb.com>
Cc: Tom McDonald <thomas.mcdonald@microsoft.com>
Link: http://lore.kernel.org/lkml/BN8PR21MB1362F63CDE7AC69736FC7F9EF7800@BN8PR21MB1362.namprd21.prod.outlook.comSigned-off-by: NArnaldo Carvalho de Melo <acme@redhat.com>

During perf inject --jit, JIT_CODE_MOVE records were injecting MMAP records
with an incorrect filename. Specifically it was missing the ".so" suffix.

Further the JIT_CODE_LOAD record were silently truncating the
jr->load.code_index field to 32 bits before generating the filename.

Make both records emit the same filename based on the full 64 bit
code_index field.

Fixes: 9b07e27f ("perf inject: Add jitdump mmap injection support")
Cc: stable@vger.kernel.org # v4.6+
Signed-off-by: NSteve MacLean <Steve.MacLean@Microsoft.com>
Acked-by: NJiri Olsa <jolsa@kernel.org>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: Brian Robbins <brianrob@microsoft.com>
Cc: Davidlohr Bueso <dave@stgolabs.net>
Cc: Eric Saint-Etienne <eric.saint.etienne@oracle.com>
Cc: John Keeping <john@metanate.com>
Cc: John Salem <josalem@microsoft.com>
Cc: Leo Yan <leo.yan@linaro.org>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Song Liu <songliubraving@fb.com>
Cc: Stephane Eranian <eranian@google.com>
Cc: Tom McDonald <thomas.mcdonald@microsoft.com>
Link: http://lore.kernel.org/lkml/BN8PR21MB1362FF8F127B31DBF4121528F7800@BN8PR21MB1362.namprd21.prod.outlook.comSigned-off-by: NArnaldo Carvalho de Melo <acme@redhat.com>

Whenever an mmap/mmap2 event occurs, the map tree must be updated to add a new
entry. If a new map overlaps a previous map, the overlapped section of the
previous map is effectively unmapped, but the non-overlapping sections are
still valid.

maps__fixup_overlappings() is responsible for creating any new map entries from
the previously overlapped map. It optionally creates a before and an after map.

When creating the after map the existing code failed to adjust the map.pgoff.
This meant the new after map would incorrectly calculate the file offset
for the ip. This results in incorrect symbol name resolution for any ip in the
after region.

Make maps__fixup_overlappings() correctly populate map.pgoff.

Add an assert that new mapping matches old mapping at the beginning of
the after map.

Committer-testing:

Validated correct parsing of libcoreclr.so symbols from .NET Core 3.0 preview9
(which didn't strip symbols).

Preparation:

  ~/dotnet3.0-preview9/dotnet new webapi -o perfSymbol
  cd perfSymbol
  ~/dotnet3.0-preview9/dotnet publish
  perf record ~/dotnet3.0-preview9/dotnet \
      bin/Debug/netcoreapp3.0/publish/perfSymbol.dll
  ^C

Before:

  perf script --show-mmap-events 2>&1 | grep -e MMAP -e unknown |\
     grep libcoreclr.so | head -n 4
        dotnet  1907 373352.698780: PERF_RECORD_MMAP2 1907/1907: \
            [0x7fe615726000(0x768000) @ 0 08:02 5510620 765057155]: \
            r-xp .../3.0.0-preview9-19423-09/libcoreclr.so
        dotnet  1907 373352.701091: PERF_RECORD_MMAP2 1907/1907: \
            [0x7fe615974000(0x1000) @ 0x24e000 08:02 5510620 765057155]: \
            rwxp .../3.0.0-preview9-19423-09/libcoreclr.so
        dotnet  1907 373352.701241: PERF_RECORD_MMAP2 1907/1907: \
            [0x7fe615c42000(0x1000) @ 0x51c000 08:02 5510620 765057155]: \
            rwxp .../3.0.0-preview9-19423-09/libcoreclr.so
        dotnet  1907 373352.705249:     250000 cpu-clock: \
             7fe6159a1f99 [unknown] \
             (.../3.0.0-preview9-19423-09/libcoreclr.so)

After:

  perf script --show-mmap-events 2>&1 | grep -e MMAP -e unknown |\
     grep libcoreclr.so | head -n 4
        dotnet  1907 373352.698780: PERF_RECORD_MMAP2 1907/1907: \
            [0x7fe615726000(0x768000) @ 0 08:02 5510620 765057155]: \
            r-xp .../3.0.0-preview9-19423-09/libcoreclr.so
        dotnet  1907 373352.701091: PERF_RECORD_MMAP2 1907/1907: \
            [0x7fe615974000(0x1000) @ 0x24e000 08:02 5510620 765057155]: \
            rwxp .../3.0.0-preview9-19423-09/libcoreclr.so
        dotnet  1907 373352.701241: PERF_RECORD_MMAP2 1907/1907: \
            [0x7fe615c42000(0x1000) @ 0x51c000 08:02 5510620 765057155]: \
            rwxp .../3.0.0-preview9-19423-09/libcoreclr.so

All the [unknown] symbols were resolved.
Signed-off-by: NSteve MacLean <Steve.MacLean@Microsoft.com>
Tested-by: NBrian Robbins <brianrob@microsoft.com>
Acked-by: NJiri Olsa <jolsa@kernel.org>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: Davidlohr Bueso <dave@stgolabs.net>
Cc: Eric Saint-Etienne <eric.saint.etienne@oracle.com>
Cc: John Keeping <john@metanate.com>
Cc: John Salem <josalem@microsoft.com>
Cc: Leo Yan <leo.yan@linaro.org>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Song Liu <songliubraving@fb.com>
Cc: Stephane Eranian <eranian@google.com>
Cc: Tom McDonald <thomas.mcdonald@microsoft.com>
Link: http://lore.kernel.org/lkml/BN8PR21MB136270949F22A6A02335C238F7800@BN8PR21MB1362.namprd21.prod.outlook.comSigned-off-by: NArnaldo Carvalho de Melo <acme@redhat.com>

In the pmu-events directory for JSON file definitions use the
official machine name IBM z15 instead of machine type number
8561. This is consistent with previous machines.
Signed-off-by: NThomas Richter <tmricht@linux.ibm.com>
Cc: Heiko Carstens <heiko.carstens@de.ibm.com>
Cc: Vasily Gorbik <gor@linux.ibm.com>
Link: http://lore.kernel.org/lkml/20190927081147.18345-2-tmricht@linux.ibm.comSigned-off-by: NArnaldo Carvalho de Melo <acme@redhat.com>

Add s390 transaction counter definition for machine 8561. This is the
same file as for the predecessor machine.

Fixes: 6e67d77d ("perf vendor events s390: Add JSON files for machine type 8561")
Signed-off-by: NThomas Richter <tmricht@linux.ibm.com>
Cc: Heiko Carstens <heiko.carstens@de.ibm.com>
Cc: Vasily Gorbik <gor@linux.ibm.com>
Link: http://lore.kernel.org/lkml/20190927081147.18345-1-tmricht@linux.ibm.comSigned-off-by: NArnaldo Carvalho de Melo <acme@redhat.com>

The 'test_dir' variable is assigned to the 'release' array which is
out-of-scope 3 lines later.

Extend the scope of the 'release' array so that an out-of-scope array
isn't accessed.

Bug detected by clang's address sanitizer.

Fixes: 07bc5c69 ("perf tools: Make fetch_kernel_version() publicly available")
Cc: stable@vger.kernel.org # v4.4+
Signed-off-by: NIan Rogers <irogers@google.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Stephane Eranian <eranian@google.com>
Cc: Wang Nan <wangnan0@huawei.com>
Link: http://lore.kernel.org/lkml/20190926220018.25402-1-irogers@google.comSigned-off-by: NArnaldo Carvalho de Melo <acme@redhat.com>

To pick the changes from:

  78a1b96b ("fscrypt: add FS_IOC_REMOVE_ENCRYPTION_KEY_ALL_USERS ioctl")
  23c688b5 ("fscrypt: allow unprivileged users to add/remove keys for v2 policies")
  5dae460c ("fscrypt: v2 encryption policy support")
  5a7e2992 ("fscrypt: add FS_IOC_GET_ENCRYPTION_KEY_STATUS ioctl")
  b1c0ec35 ("fscrypt: add FS_IOC_REMOVE_ENCRYPTION_KEY ioctl")
  22d94f49 ("fscrypt: add FS_IOC_ADD_ENCRYPTION_KEY ioctl")
  3b6df59b ("fscrypt: use FSCRYPT_* definitions, not FS_*")
  2336d0de ("fscrypt: use FSCRYPT_ prefix for uapi constants")
  7af0ab0d ("fs, fscrypt: move uapi definitions to new header <linux/fscrypt.h>")

That don't trigger any changes in tooling, as it so far is used only
for:

  $ grep -l 'fs\.h' tools/perf/trace/beauty/*.sh | xargs grep regex=
  tools/perf/trace/beauty/rename_flags.sh:regex='^[[:space:]]*#[[:space:]]*define[[:space:]]+RENAME_([[:alnum:]_]+)[[:space:]]+\(1[[:space:]]*<<[[:space:]]*([[:xdigit:]]+)[[:space:]]*\)[[:space:]]*.*'
  tools/perf/trace/beauty/sync_file_range.sh:regex='^[[:space:]]*#[[:space:]]*define[[:space:]]+SYNC_FILE_RANGE_([[:alnum:]_]+)[[:space:]]+([[:xdigit:]]+)[[:space:]]*.*'
  tools/perf/trace/beauty/usbdevfs_ioctl.sh:regex="^#[[:space:]]*define[[:space:]]+USBDEVFS_(\w+)(\(\w+\))?[[:space:]]+_IO[CWR]{0,2}\([[:space:]]*(_IOC_\w+,[[:space:]]*)?'U'[[:space:]]*,[[:space:]]*([[:digit:]]+).*"
  tools/perf/trace/beauty/usbdevfs_ioctl.sh:regex="^#[[:space:]]*define[[:space:]]+USBDEVFS_(\w+)[[:space:]]+_IO[WR]{0,2}\([[:space:]]*'U'[[:space:]]*,[[:space:]]*([[:digit:]]+).*"
  $

This silences this perf build warning:

  Warning: Kernel ABI header at 'tools/include/uapi/linux/fs.h' differs from latest version at 'include/uapi/linux/fs.h'
  diff -u tools/include/uapi/linux/fs.h include/uapi/linux/fs.h

Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Eric Biggers <ebiggers@google.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Link: https://lkml.kernel.org/n/tip-44g48exl9br9ba0t64chqb4i@git.kernel.orgSigned-off-by: NArnaldo Carvalho de Melo <acme@redhat.com>

With this change if a perf_date parameter is provided to asciidoc then
it will override the default date written to the man page metadata.

Without this change, or if the perf_date isn't specified, then the
current date is written to the metadata.

Having this parameter allows the metadata to be constant if builds
happen on different dates.

The name of the parameter is intended to be consistent with the existing
perf_version parameter.
Signed-off-by: NIan Rogers <irogers@google.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Stephane Eranian <eranian@google.com>
Link: http://lore.kernel.org/lkml/20190921041327.155054-1-irogers@google.comSigned-off-by: NArnaldo Carvalho de Melo <acme@redhat.com>

An optimized build such as:

  make -C tools/perf CLANG=1 CC=clang EXTRA_CFLAGS="-O3

will turn the dereference operation into a ud2 instruction, raising a
SIGILL rather than a SIGSEGV. Use raise(..) for correctness and clarity.

Similar issues were addressed in Numfor Mbiziwo-Tiapo's patch:

  https://lkml.org/lkml/2019/7/8/1234

Committer testing:

Before:

  [root@quaco ~]# perf test hooks
  55: perf hooks                                            : Ok
  [root@quaco ~]# perf test -v hooks
  55: perf hooks                                            :
  --- start ---
  test child forked, pid 17092
  SIGSEGV is observed as expected, try to recover.
  Fatal error (SEGFAULT) in perf hook 'test'
  test child finished with 0
  ---- end ----
  perf hooks: Ok
  [root@quaco ~]#

After:

  [root@quaco ~]# perf test hooks
  55: perf hooks                                            : Ok
  [root@quaco ~]# perf test -v hooks
  55: perf hooks                                            :
  --- start ---
  test child forked, pid 17909
  SIGSEGV is observed as expected, try to recover.
  Fatal error (SEGFAULT) in perf hook 'test'
  test child finished with 0
  ---- end ----
  perf hooks: Ok
  [root@quaco ~]#

Fixes: a074865e ("perf tools: Introduce perf hooks")
Signed-off-by: NIan Rogers <irogers@google.com>
Tested-by: NArnaldo Carvalho de Melo <acme@redhat.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Stephane Eranian <eranian@google.com>
Cc: Wang Nan <wangnan0@huawei.com>
Link: http://lore.kernel.org/lkml/20190925195924.152834-2-irogers@google.comSigned-off-by: NArnaldo Carvalho de Melo <acme@redhat.com>

Naresh Kamboju reported, that on the i386 build pr_err()
doesn't get defined properly due to header ordering:

  perf-in.o: In function `libunwind__x86_reg_id':
  tools/perf/util/libunwind/../../arch/x86/util/unwind-libunwind.c:109:
  undefined reference to `pr_err'
Reported-by: NNaresh Kamboju <naresh.kamboju@linaro.org>
Signed-off-by: NArnaldo Carvalho de Melo <acme@redhat.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: linux-kernel@vger.kernel.org
Signed-off-by: NIngo Molnar <mingo@kernel.org>

They go on accumulating there like the debug.h one, that was introduced
here:

  f2361024 ("perf list: Add debug support for outputing alias string")

But then, when that need is removed via:

  2073ad33 ("perf tools: Factor out PMU matching in parser")

The thing stays there, so continue the house cleaning spree...

list.h not needed, no macros from there are used, and 'struct
list_head' is in linux/types.h, ditto for util.h, no need for that as
well.

Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Link: https://lkml.kernel.org/n/tip-zkxr3mf6inun8m5mbnil4u0d@git.kernel.orgSigned-off-by: NArnaldo Carvalho de Melo <acme@redhat.com>

With Java 11 there is no seperate JRE anymore.

Details:

  https://coderanch.com/t/701603/java/JRE-JDK

Therefore the detection of the JRE needs to be adapted.

This change works for s390 and x86.  I have not tested other platforms.

Committer testing:

Continues to work with the OpenJDK 8:

  $ rm -f ~acme/lib64/libperf-jvmti.so
  $ rpm -qa | grep jdk-devel
  java-1.8.0-openjdk-devel-1.8.0.222.b10-0.fc30.x86_64
  $ git log --oneline -1
  a51937170f33 (HEAD -> perf/core) perf build: Add detection of java-11-openjdk-devel package
  $ rm -rf /tmp/build/perf ; mkdir -p /tmp/build/perf ; make -C tools/perf O=/tmp/build/perf install > /dev/null 2>1
  $ ls -la ~acme/lib64/libperf-jvmti.so
  -rwxr-xr-x. 1 acme acme 230744 Sep 24 16:46 /home/acme/lib64/libperf-jvmti.so
  $
Suggested-by: NAndreas Krebbel <krebbel@linux.ibm.com>
Signed-off-by: NThomas Richter <tmricht@linux.ibm.com>
Tested-by: NArnaldo Carvalho de Melo <acme@redhat.com>
Cc: Heiko Carstens <heiko.carstens@de.ibm.com>
Cc: Hendrik Brueckner <brueckner@linux.ibm.com>
Cc: Vasily Gorbik <gor@linux.ibm.com>
Link: http://lore.kernel.org/lkml/20190909114116.50469-4-tmricht@linux.ibm.comSigned-off-by: NArnaldo Carvalho de Melo <acme@redhat.com>

Enable JVMTI support for s390 perf tool chain.
Signed-off-by: NThomas Richter <tmricht@linux.ibm.com>
Cc: Heiko Carstens <heiko.carstens@de.ibm.com>
Cc: Hendrik Brueckner <brueckner@linux.ibm.com>
Cc: Vasily Gorbik <gor@linux.ibm.com>
Link: http://lore.kernel.org/lkml/20190909114116.50469-3-tmricht@linux.ibm.comSigned-off-by: NArnaldo Carvalho de Melo <acme@redhat.com>

This patch is to remove following hardware events
from JSON file which are not supported on POWER8.

pm_l3_p0_grp_pump
pm_l3_p0_lco_data
pm_l3_p0_lco_no_data
pm_l3_p0_lco_rty

  Note: Unfortunately power8 event list is not publicly available.

Fixes: c3b4d5c4 ("perf vendor events: Remove P8 HW events which are not supported")
Signed-off-by: NMamatha Inamdar <mamatha4@linux.vnet.ibm.com>
Acked-by: NRavi Bangoria <ravi.bangoria@linux.ibm.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Madhavan Srinivasan <maddy@linux.vnet.ibm.com>
Cc: Michael Ellerman <mpe@ellerman.id.au>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: http://lore.kernel.org/lkml/20190909065624.11956.3992.stgit@localhost.localdomainSigned-off-by: NArnaldo Carvalho de Melo <acme@redhat.com>

I'm not fully sure if this is the correct fix, but without this I get
crashes on more complex perf stat metric usages. The problem is that
part of the state gets freed when a weak group fails, but then is later
still used. Just don't free the ids, we're going to reuse them anyways
on the weak group retry.

For example:

  % perf stat -M IpB,IpCall,IpTB,IPC,Retiring_SMT,Frontend_Bound_SMT,Kernel_Utilization,CPU_Utilization --metric-only -a -I 1000 sleep 2

  crashes and gives in valgrind:

  =21527== Invalid write of size 8
  ==21527==    at 0x4EE582: hlist_add_head (list.h:644)
  ==21527==    by 0x4EFD3C: perf_evlist__id_hash (evlist.c:477)
  ==21527==    by 0x4EFD99: perf_evlist__id_add (evlist.c:483)
  ==21527==    by 0x4EFF15: perf_evlist__id_add_fd (evlist.c:524)
  ==21527==    by 0x4FC693: store_evsel_ids (evsel.c:2969)
  ==21527==    by 0x4FC76C: perf_evsel__store_ids (evsel.c:2986)
  ==21527==    by 0x450DA7: __run_perf_stat (builtin-stat.c:519)
  ==21527==    by 0x451285: run_perf_stat (builtin-stat.c:636)
  ==21527==    by 0x454619: cmd_stat (builtin-stat.c:1966)
  ==21527==    by 0x4D557D: run_builtin (perf.c:310)
  ==21527==    by 0x4D57EA: handle_internal_command (perf.c:362)
  ==21527==    by 0x4D5931: run_argv (perf.c:406)
  ==21527==  Address 0x12e3f008 is 104 bytes inside a block of size 2,056 free'd
  ==21527==    at 0x4839A0C: free (vg_replace_malloc.c:540)
  ==21527==    by 0x627139: xyarray__delete (xyarray.c:32)
  ==21527==    by 0x4F6BE4: perf_evsel__free_id (evsel.c:1253)
  ==21527==    by 0x4FA11F: evsel__close (evsel.c:1994)
  ==21527==    by 0x4F30A3: perf_evlist__reset_weak_group (evlist.c:1783)
  ==21527==    by 0x450B47: __run_perf_stat (builtin-stat.c:466)
  ==21527==    by 0x451285: run_perf_stat (builtin-stat.c:636)
  ==21527==    by 0x454619: cmd_stat (builtin-stat.c:1966)
  ==21527==    by 0x4D557D: run_builtin (perf.c:310)
  ==21527==    by 0x4D57EA: handle_internal_command (perf.c:362)
  ==21527==    by 0x4D5931: run_argv (perf.c:406)
  ==21527==    by 0x4D5CAE: main (perf.c:531)
  ==21527==  Block was alloc'd at
  ==21527==    at 0x483AB1A: calloc (vg_replace_malloc.c:762)
  ==21527==    by 0x627024: zalloc (zalloc.c:8)
  ==21527==    by 0x627088: xyarray__new (xyarray.c:10)
  ==21527==    by 0x4F6B20: perf_evsel__alloc_id (evsel.c:1237)
  ==21527==    by 0x4FC74E: perf_evsel__store_ids (evsel.c:2983)
  ==21527==    by 0x450DA7: __run_perf_stat (builtin-stat.c:519)
  ==21527==    by 0x451285: run_perf_stat (builtin-stat.c:636)
  ==21527==    by 0x454619: cmd_stat (builtin-stat.c:1966)
  ==21527==    by 0x4D557D: run_builtin (perf.c:310)
  ==21527==    by 0x4D57EA: handle_internal_command (perf.c:362)
  ==21527==    by 0x4D5931: run_argv (perf.c:406)
  ==21527==    by 0x4D5CAE: main (perf.c:531)
Signed-off-by: NAndi Kleen <ak@linux.intel.com>
Acked-by: NJiri Olsa <jolsa@kernel.org>
Tested-by: NArnaldo Carvalho de Melo <acme@redhat.com>
Link: http://lore.kernel.org/lkml/20190923233339.25326-1-andi@firstfloor.orgSigned-off-by: NArnaldo Carvalho de Melo <acme@redhat.com>

Make sure to not free the name passed in by the caller, but free all the
allocated ids when parsing expressions.

The loop at the end knows that the first entry shouldn't be freed, so
make sure the caller name is the first entry.

Fixes

  % perf stat -M IpB,IpCall,IpTB,IPC,Retiring_SMT,Frontend_Bound_SMT,Kernel_Utilization,CPU_Utilization --metric-only -a -I 1000 sleep 2

  valgrind:
       1.009943231 ==21527== Invalid read of size 1
  ==21527==    at 0x483CB74: strcmp (vg_replace_strmem.c:849)
  ==21527==    by 0x582CF8: collect_all_aliases (stat-display.c:554)
  ==21527==    by 0x582EB3: collect_data (stat-display.c:577)
  ==21527==    by 0x583A32: print_counter_aggr (stat-display.c:806)
  ==21527==    by 0x584FAD: perf_evlist__print_counters (stat-display.c:1200)
  ==21527==    by 0x45133A: print_counters (builtin-stat.c:655)
  ==21527==    by 0x450629: process_interval (builtin-stat.c:353)
  ==21527==    by 0x450FBD: __run_perf_stat (builtin-stat.c:564)
  ==21527==    by 0x451285: run_perf_stat (builtin-stat.c:636)
  ==21527==    by 0x454619: cmd_stat (builtin-stat.c:1966)
  ==21527==    by 0x4D557D: run_builtin (perf.c:310)
  ==21527==    by 0x4D57EA: handle_internal_command (perf.c:362)
  ==21527==  Address 0x12826cd0 is 0 bytes inside a block of size 25 free'd
  ==21527==    at 0x4839A0C: free (vg_replace_malloc.c:540)
  ==21527==    by 0x627041: __zfree (zalloc.c:13)
  ==21527==    by 0x57F66A: generic_metric (stat-shadow.c:814)
  ==21527==    by 0x580B21: perf_stat__print_shadow_stats (stat-shadow.c:1057)
  ==21527==    by 0x58418E: print_metric_headers (stat-display.c:943)
  ==21527==    by 0x5844BC: print_interval (stat-display.c:1004)
  ==21527==    by 0x584DEB: perf_evlist__print_counters (stat-display.c:1172)
  ==21527==    by 0x45133A: print_counters (builtin-stat.c:655)
  ==21527==    by 0x450629: process_interval (builtin-stat.c:353)
  ==21527==    by 0x450FBD: __run_perf_stat (builtin-stat.c:564)
  ==21527==    by 0x451285: run_perf_stat (builtin-stat.c:636)
  ==21527==    by 0x454619: cmd_stat (builtin-stat.c:1966)
  ==21527==  Block was alloc'd at
  ==21527==    at 0x483880B: malloc (vg_replace_malloc.c:309)
  ==21527==    by 0x51677DE: strdup (in /usr/lib64/libc-2.29.so)
  ==21527==    by 0x506457: parse_events_name (parse-events.c:1754)
  ==21527==    by 0x5550BB: parse_events_parse (parse-events.y:214)
  ==21527==    by 0x50694D: parse_events__scanner (parse-events.c:1887)
  ==21527==    by 0x506AEF: parse_events (parse-events.c:1927)
  ==21527==    by 0x521D8B: metricgroup__parse_groups (metricgroup.c:527)
  ==21527==    by 0x45156F: parse_metric_groups (builtin-stat.c:721)
  ==21527==    by 0x6228A9: get_value (parse-options.c:243)
  ==21527==    by 0x62363F: parse_short_opt (parse-options.c:348)
  ==21527==    by 0x62363F: parse_options_step (parse-options.c:536)
  ==21527==    by 0x62363F: parse_options_subcommand (parse-options.c:651)
  ==21527==    by 0x453C1D: cmd_stat (builtin-stat.c:1718)
  ==21527==    by 0x4D557D: run_builtin (perf.c:310)

and also a leak report.

Committer testing:

Before:

  # perf stat -M IpB,IpCall,IpTB,IPC,Retiring_SMT,Frontend_Bound_SMT,Kernel_Utilization,CPU_Utilization --metric-only -a -I 1000 sleep 2
  #           time      CPU_Utilization
       1.000470810                      free(): double free detected in tcache 2
  Aborted (core dumped)
  #

After:

  # perf stat -M IpB,IpCall,IpTB,IPC,Retiring_SMT,Frontend_Bound_SMT,Kernel_Utilization,CPU_Utilization --metric-only -a -I 1000 sleep 2
  #           time      CPU_Utilization
       1.000494752                  0.1
       2.001105112                  0.1
  #
Signed-off-by: NAndi Kleen <ak@linux.intel.com>
Acked-by: NJiri Olsa <jolsa@kernel.org>
Tested-by: NArnaldo Carvalho de Melo <acme@redhat.com>
Link: http://lore.kernel.org/lkml/20190923233339.25326-3-andi@firstfloor.orgSigned-off-by: NArnaldo Carvalho de Melo <acme@redhat.com>

The perf_sample struct definition and the event_attr_init() are in
util/event.h, but some places were getting it thru an otherwise needless
util/mmap.h header, fix it by including util/event.h directly.

Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Link: https://lkml.kernel.org/n/tip-p1anwyjdbbvghrkl9dlxv7h5@git.kernel.orgSigned-off-by: NArnaldo Carvalho de Melo <acme@redhat.com>

Further reducing the size of util/evsel.h.

Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Link: https://lkml.kernel.org/n/tip-20zr7di9eynm0272mtjfdhfc@git.kernel.orgSigned-off-by: NArnaldo Carvalho de Melo <acme@redhat.com>

Ditch it, noone is using it, one more stdio.h include in a hot header.

Fix the fallout in parse-events.y, where we end up using a FILE pointer,
I think due to YYDEBUG being set and in some places, like Amazon Linux 1
we don't get stdio.h included by luck, like in most other places, add a
explicit stdio.h include directive.

Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Link: https://lkml.kernel.org/n/tip-37k5q0lhdbo2hvvfbnnzn7og@git.kernel.orgSigned-off-by: NArnaldo Carvalho de Melo <acme@redhat.com>

We already had evsel_fprintf.c, add its counterpart, so that we can
reduce evsel.h a bit more.

We needed a new perf_event_attr_fprintf.c file so as to have a separate
object to link with the python binding in tools/perf/util/python-ext-sources
and not drag symbol_conf, etc into the python binding.

Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Link: https://lkml.kernel.org/n/tip-06bdmt1062d9unzgqmxwlv88@git.kernel.orgSigned-off-by: NArnaldo Carvalho de Melo <acme@redhat.com>

So that we an later link it to the python binding without having to
drag the symbol object files.

Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Link: https://lkml.kernel.org/n/tip-8823tveyasocnuoelq4qopwf@git.kernel.orgSigned-off-by: NArnaldo Carvalho de Melo <acme@redhat.com>

Further reducing the util.c hodgepodge files.

Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Link: https://lkml.kernel.org/n/tip-0i62zh7ok25znibyebgq0qs4@git.kernel.orgSigned-off-by: NArnaldo Carvalho de Melo <acme@redhat.com>

Move perf_evlist__poll() from tools/perf to libperf, it will be used in
the following patches.

And rename the existing perf's function to evlist__poll().
Signed-off-by: NJiri Olsa <jolsa@kernel.org>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Michael Petlan <mpetlan@redhat.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Link: http://lore.kernel.org/lkml/20190913132355.21634-39-jolsa@kernel.orgSigned-off-by: NArnaldo Carvalho de Melo <acme@redhat.com>

Move perf_evlist__add_pollfd() from tools/perf to libperf, it will be
used in the following patches.

Also rename perf's perf_evlist__add_pollfd()/perf_evlist__filter_pollfd()
to evlist__add_pollfd()/evlist__filter_pollfd().
Signed-off-by: NJiri Olsa <jolsa@kernel.org>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Michael Petlan <mpetlan@redhat.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Link: http://lore.kernel.org/lkml/20190913132355.21634-38-jolsa@kernel.orgSigned-off-by: NArnaldo Carvalho de Melo <acme@redhat.com>

Move perf_evlist__alloc_pollfd() from tools/perf to libperf, it will be
used in the following patches.
Signed-off-by: NJiri Olsa <jolsa@kernel.org>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Michael Petlan <mpetlan@redhat.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Link: http://lore.kernel.org/lkml/20190913132355.21634-37-jolsa@kernel.org
[ Added api/fd/array.h include to the lib/evlist.c file ]
Signed-off-by: NArnaldo Carvalho de Melo <acme@redhat.com>

Add libperf_init() call to the automated tests.

Committer notes:

Added missing stdarg.h and/or stdio.h to places using vfprintf.
Signed-off-by: NJiri Olsa <jolsa@kernel.org>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Michael Petlan <mpetlan@redhat.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Link: http://lore.kernel.org/lkml/20190913132355.21634-34-jolsa@kernel.orgSigned-off-by: NArnaldo Carvalho de Melo <acme@redhat.com>

The libperf_set_print() function needs to be called in any case so let's
merge it with libperf_init(), so we have just one init function.
Signed-off-by: NJiri Olsa <jolsa@kernel.org>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Michael Petlan <mpetlan@redhat.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Link: http://lore.kernel.org/lkml/20190913132355.21634-34-jolsa@kernel.orgSigned-off-by: NArnaldo Carvalho de Melo <acme@redhat.com>