mainline inclusion
from mainline-master
commit 5e69ea7e
category: feature
bugzilla: 173966
CVE: NA

Reference: https://git.kernel.org/pub/scm/linux/kernel/git/torvalds/linux.git/commit/?id=5e69ea7ee2a69f68c4172afcb0cbe29e7162fb6e

----------------------------------------------------------------------

Currently, each debugfs command needs to create a file to get
the information. To better support more debugfs commands, the
debugfs process is reconstructed, including the process of
creating dentries and files, and obtaining information.
Signed-off-by: NYufeng Mo <moyufeng@huawei.com>
Signed-off-by: NHuazhong Tan <tanhuazhong@huawei.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>
Reviewed-by: NYongxin Li <liyongxin1@huawei.com>
Signed-off-by: NJunxin Chen <chenjunxin1@huawei.com>
Signed-off-by: NZheng Zengkai <zhengzengkai@huawei.com>

mainline inclusion
from mainline-master
commit 1ddc028a
category: feature
bugzilla: 173966
CVE: NA

Reference: https://git.kernel.org/pub/scm/linux/kernel/git/torvalds/linux.git/commit/?id=1ddc028ac84988b6b1c9ceb9d15acbf321735ca3

----------------------------------------------------------------------

Only when RXD advanced layout is enabled, in some cases
(e.g. ip fragments), the checksum of entire packet will be
calculated and filled in the least significant 16 bits of
the unused addr field.

So refactor out the handling of RX completion checksum: adjust
the location of the checksum in RX descriptor, and use ptype table
to identify whether this kind of checksum is calculated.
Signed-off-by: NHuazhong Tan <tanhuazhong@huawei.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>
Reviewed-by: NYongxin Li <liyongxin1@huawei.com>
Signed-off-by: NJunxin Chen <chenjunxin1@huawei.com>
Signed-off-by: NZheng Zengkai <zhengzengkai@huawei.com>

mainline inclusion
from mainline-master
commit 79664077
category: feature
bugzilla: 173966
CVE: NA

Reference: https://git.kernel.org/pub/scm/linux/kernel/git/torvalds/linux.git/commit/?id=796640778c26f3d99fde173bb7b1d726b5f0d816

----------------------------------------------------------------------

Currently, the driver gets packet type by parsing the
L3_ID/L4_ID/OL3_ID/OL4_ID from RX descriptor, it's
time-consuming.

Now some new devices support RXD advanced layout, which combines
previous OL3_ID/OL4_ID to 8bit ptype field, so the driver gets
packet type by looking up only one table, and L3_ID/L4_ID become
reserved fields.

Considering compatibility, the firmware will report capability of
RXD advanced layout, the driver will identify and enable it by
default. This patch provides basic function: identify and enable
the RXD advanced layout, and refactor out hns3_rx_checksum() by
using ptype table to handle RX checksum if supported.
Signed-off-by: NHuazhong Tan <tanhuazhong@huawei.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>
Reviewed-by: NYongxin Li <liyongxin1@huawei.com>
Signed-off-by: NJunxin Chen <chenjunxin1@huawei.com>
Signed-off-by: NZheng Zengkai <zhengzengkai@huawei.com>

mainline inclusion
from mainline-v5.13-rc1
commit 8c9200e3
category: bugfix
bugzilla: 173966
CVE: NA

Reference: https://git.kernel.org/pub/scm/linux/kernel/git/torvalds/linux.git/commit/?id=8c9200e387721c597baabb319b4bd1cdf1155e35

----------------------------------------------------------------------

HW error and global reset are reported through MSIX interrupts.
The same error may be reported to different functions at the
same time. When global reset begins, the pending reset request
set by this error is unnecessary. So clear the pending reset
request after the reset is complete to avoid the repeated reset.

Fixes: f6162d44 ("net: hns3: add handling of hw errors reported through MSIX")
Signed-off-by: NYufeng Mo <moyufeng@huawei.com>
Signed-off-by: NHuazhong Tan <tanhuazhong@huawei.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>
Reviewed-by: NYongxin Li <liyongxin1@huawei.com>
Signed-off-by: NJunxin Chen <chenjunxin1@huawei.com>
Signed-off-by: NZheng Zengkai <zhengzengkai@huawei.com>

mainline inclusion
from mainline-v5.13-rc1
commit 8ed64dbe
category: feature
bugzilla: 173966
CVE: NA

Reference: https://git.kernel.org/pub/scm/linux/kernel/git/torvalds/linux.git/commit/?id=8ed64dbe0bdf39479772896b2b4e5cbbdf89f086

----------------------------------------------------------------------

The SEPARATOR_VALUE macro is used as separator when getting
the register value, but the value of this macro is different
between pf and vf, it is a bit confusing for the user, so
synchronize the value of vf with pf.
Signed-off-by: NHuazhong Tan <tanhuazhong@huawei.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>
Reviewed-by: NYongxin Li <liyongxin1@huawei.com>
Signed-off-by: NJunxin Chen <chenjunxin1@huawei.com>
Signed-off-by: NZheng Zengkai <zhengzengkai@huawei.com>

mainline inclusion
from mainline-v5.13-rc1
commit 8ed64dbe
category: feature
bugzilla: 173966
CVE: NA

Reference: https://git.kernel.org/pub/scm/linux/kernel/git/torvalds/linux.git/commit/?id=8ed64dbe0bdf39479772896b2b4e5cbbdf89f086

----------------------------------------------------------------------

Modify some inappropriate spaces in comments of struct
hlcgevf_tqp_stats.
Signed-off-by: NHuazhong Tan <tanhuazhong@huawei.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>
Reviewed-by: NYongxin Li <liyongxin1@huawei.com>
Signed-off-by: NJunxin Chen <chenjunxin1@huawei.com>
Signed-off-by: NZheng Zengkai <zhengzengkai@huawei.com>

mainline inclusion
from mainline-v5.13-rc1
commit 1c5a2ba6
category: bugfix
bugzilla: 173966
CVE: NA

Reference: https://git.kernel.org/pub/scm/linux/kernel/git/torvalds/linux.git/commit/?id=1c5a2ba67989c01b8aeda81969b7a4a3702c51b5

----------------------------------------------------------------------

When enter suspend mode the counter of pf reset will be increased
twice, since both hclge_prepare_general() and hclge_prepare_wait()
increase this counter. So remove the duplicate counting in
hclge_prepare_general().
Signed-off-by: NHuazhong Tan <tanhuazhong@huawei.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>
Reviewed-by: NYongxin Li <liyongxin1@huawei.com>
Signed-off-by: NJunxin Chen <chenjunxin1@huawei.com>
Signed-off-by: NZheng Zengkai <zhengzengkai@huawei.com>

mainline inclusion
from mainline-v5.13-rc1
commit 01305e16
category: feature
bugzilla: 173966
CVE: NA

Reference: https://git.kernel.org/pub/scm/linux/kernel/git/torvalds/linux.git/commit/?id=01305e16ebe7791e7a1b97485f83999f48cd79d0

----------------------------------------------------------------------

To reduce the processing of unnecessary mailbox command when PF supports
actively push its link status to VFs, VFs stop sending request link
status command in periodic service task in this case.
Signed-off-by: NGuangbin Huang <huangguangbin2@huawei.com>
Signed-off-by: NHuazhong Tan <tanhuazhong@huawei.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>
Reviewed-by: NYongxin Li <liyongxin1@huawei.com>
Signed-off-by: NJunxin Chen <chenjunxin1@huawei.com>
Signed-off-by: NZheng Zengkai <zhengzengkai@huawei.com>

mainline inclusion
from mainline-v5.13-rc1
commit 18b6e31f
category: feature
bugzilla: 173966
CVE: NA

Reference: https://git.kernel.org/pub/scm/linux/kernel/git/torvalds/linux.git/commit/?id=18b6e31f8bf4ac7af7b057228f38a5a530378e4e

----------------------------------------------------------------------

Previously, VF updates its link status every second by send query command
to PF in periodic service task. If link stats of PF is changed, VF may
need at most one second to update its link status.

To reduce delay of link status between PF and VFs, PF actively push its
link status to VFs when its link status is updated. And to let VF know
PF supports this new feature, the link status changed mailbox command
adds one bit to indicate it.
Signed-off-by: NGuangbin Huang <huangguangbin2@huawei.com>
Signed-off-by: NHuazhong Tan <tanhuazhong@huawei.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>
Reviewed-by: NYongxin Li <liyongxin1@huawei.com>
Signed-off-by: NJunxin Chen <chenjunxin1@huawei.com>
Signed-off-by: NZheng Zengkai <zhengzengkai@huawei.com>

mainline inclusion
from mainline-v5.13-rc1
commit d0494135
category: bugfix
bugzilla: 173966
CVE: NA

Reference: https://git.kernel.org/pub/scm/linux/kernel/git/torvalds/linux.git/commit/?id=d0494135f94c7ab5a9cf7a9094fbb233275c7ba6

----------------------------------------------------------------------

The reset_prepare and reset_done calls have a null pointer check
on ae_dev however ae_dev is being dereferenced via the call to
ns3_is_phys_func with the ae->pdev argument. Fix this by performing
a null pointer check on ae_dev and hence short-circuiting the
dereference to ae_dev on the call to ns3_is_phys_func.

Addresses-Coverity: ("Dereference before null check")
Fixes: 715c58e9 ("net: hns3: add suspend and resume pm_ops")
Signed-off-by: NColin Ian King <colin.king@canonical.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>
Reviewed-by: NYongxin Li <liyongxin1@huawei.com>
Signed-off-by: NJunxin Chen <chenjunxin1@huawei.com>
Signed-off-by: NZheng Zengkai <zhengzengkai@huawei.com>

mainline inclusion
from mainline-v5.12-rc7
commit cd7e963d
category: bugfix
bugzilla: 173966
CVE: NA

Reference: https://git.kernel.org/pub/scm/linux/kernel/git/torvalds/linux.git/commit/?id=cd7e963d2f0875789ddb5c3746b628716bd0a8c9

----------------------------------------------------------------------

Some trivial spelling mistakes which caught my eye during the
review of the code.
Signed-off-by: NSalil Mehta <salil.mehta@huawei.com>
Link: https://lore.kernel.org/r/20210409074223.32480-1-salil.mehta@huawei.comSigned-off-by: NJakub Kicinski <kuba@kernel.org>
Reviewed-by: NYongxin Li <liyongxin1@huawei.com>
Signed-off-by: NJunxin Chen <chenjunxin1@huawei.com>
Signed-off-by: NZheng Zengkai <zhengzengkai@huawei.com>

mainline inclusion
from mainline-v5.13-rc1
commit 715c58e9
category: feature
bugzilla: 173966
CVE: NA

Reference: https://git.kernel.org/pub/scm/linux/kernel/git/torvalds/linux.git/commit/?id=715c58e94f0d78907bfccde12c2ca5236502c53e

----------------------------------------------------------------------

To implement the system suspend/resume functions, the NIC driver needs
to support:
1. When the system enters the suspend mode, the driver needs to
implement the suspend callback function of the NIC device. The driver
needs to mute the device, stop all RX/TX activities of the device, and
unmap the interrupt.
2. When the system enters the resume mode, the driver needs to
implement the resume callback function of the NIC device and restore
the device to the state before suspension.

When the system enters the suspend and resume mode, the NIC driver
actually executes the PF function reset process.

When the PFs are suspending/resuming, VFs also enter the suspend/resume
state because the PFs trigger the VFs to reset, therefore no operation
is required when the VF pci_driver is suspending or resuming.
Signed-off-by: Jiaran Zhang <zhangjiaran@huawei.com>
Signed-off-by: NHuazhong Tan <tanhuazhong@huawei.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>
Reviewed-by: NYongxin Li <liyongxin1@huawei.com>
Signed-off-by: NJunxin Chen <chenjunxin1@huawei.com>
Signed-off-by: NZheng Zengkai <zhengzengkai@huawei.com>

mainline inclusion
from mainline-v5.13-rc1
commit bb1890d5
category: feature
bugzilla: 173966
CVE: NA

Reference: https://git.kernel.org/pub/scm/linux/kernel/git/torvalds/linux.git/commit/?id=bb1890d5f97425766a865d75f99fd556d5dc6893

----------------------------------------------------------------------

The flr_prepare/flr_done functions are not only used in the FLR scenario,
but also used in the suspend/resume.

Change the function names to prepare_for_reset/rebuild_for_reset, change
the flr_prepare/flr_done to reset_prepare/reset_done in hnae3_ae_ops.
Signed-off-by: Jiaran Zhang <zhangjiaran@huawei.com>
Signed-off-by: NHuazhong Tan <tanhuazhong@huawei.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>
Reviewed-by: NYongxin Li <liyongxin1@huawei.com>
Signed-off-by: NJunxin Chen <chenjunxin1@huawei.com>
Signed-off-by: NZheng Zengkai <zhengzengkai@huawei.com>

mainline inclusion
from mainline-v5.12-rc7
commit 0600771f
category: bugfix
bugzilla: 173966
CVE: NA

Reference: https://git.kernel.org/pub/scm/linux/kernel/git/torvalds/linux.git/commit/?id=0600771fa6b231e801ba1ff5d7adfcf7659dbbf3

----------------------------------------------------------------------

Code to defer the reset(which caps the frequency of the reset) schedules the
timer and returns. Hence, following 'else-if' looks un-necessary.

Fixes: 9de0b86f ("net: hns3: Prevent to request reset frequently")
Signed-off-by: NSalil Mehta <salil.mehta@huawei.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>
Reviewed-by: NYongxin Li <liyongxin1@huawei.com>
Signed-off-by: NJunxin Chen <chenjunxin1@huawei.com>
Signed-off-by: NZheng Zengkai <zhengzengkai@huawei.com>

mainline inclusion
from mainline-v5.12-rc7
commit 9a6aaf61
category: bugfix
bugzilla: 173966
CVE: NA

Reference: https://git.kernel.org/pub/scm/linux/kernel/git/torvalds/linux.git/commit/?id=9a6aaf61487e6d96ce0bf9b84a784c528dbf6e5e

----------------------------------------------------------------------

This removes the left over check and assignment which is no longer used
anywhere in the function and should have been removed as part of the
below mentioned patch.

Fixes: 012fcb52 ("net: hns3: activate reset timer when calling reset_event")
Signed-off-by: NSalil Mehta <salil.mehta@huawei.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>
Reviewed-by: NYongxin Li <liyongxin1@huawei.com>
Signed-off-by: NJunxin Chen <chenjunxin1@huawei.com>
Signed-off-by: NZheng Zengkai <zhengzengkai@huawei.com>

mainline inclusion
from mainline-v5.13-rc1
commit 97b9e5c1
category: feature
bugzilla: 173966
CVE: NA

Reference: https://git.kernel.org/pub/scm/linux/kernel/git/torvalds/linux.git/commit/?id=97b9e5c131f16e2e487139ba596f9e6df927ae87

----------------------------------------------------------------------

skb_put_padto() may fails because of memory failure, sw_err_cnt
is already used to log memory failure in hns3_skb_linearize(),
so use it to log the memory failure for skb_put_padto() too.
Signed-off-by: NYunsheng Lin <linyunsheng@huawei.com>
Signed-off-by: NHuazhong Tan <tanhuazhong@huawei.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>
Reviewed-by: NYongxin Li <liyongxin1@huawei.com>
Signed-off-by: NJunxin Chen <chenjunxin1@huawei.com>
Signed-off-by: NZheng Zengkai <zhengzengkai@huawei.com>

mainline inclusion
from mainline-v5.13-rc1
commit 33a8f764
category: feature
bugzilla: 173966
CVE: NA

Reference: https://git.kernel.org/pub/scm/linux/kernel/git/torvalds/linux.git/commit/?id=33a8f7649913e4aeda34bc1294302688112c9c56

----------------------------------------------------------------------

The device HNAE3_DEVICE_VERSION_V3 supports up to 1280 queues
and qsets for one function, so the bitwidth of tc_offset, meaning
the tqps index, needs to expand from 10 bits to 11 bits.

The device HNAE3_DEVICE_VERSION_V3 supports up to 512 queues on
one TC. The tc_size, meaning the exponent with base 2 of queues
supported on TC, which needs to expand from 3 bits to 4 bits.
Signed-off-by: NGuojia Liao <liaoguojia@huawei.com>
Signed-off-by: NHuazhong Tan <tanhuazhong@huawei.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>
Reviewed-by: NYongxin Li <liyongxin1@huawei.com>
Signed-off-by: NJunxin Chen <chenjunxin1@huawei.com>
Signed-off-by: NZheng Zengkai <zhengzengkai@huawei.com>

mainline inclusion
from mainline-v5.13-rc1
commit 811c0830
category: feature
bugzilla: 173966
CVE: NA

Reference: https://git.kernel.org/pub/scm/linux/kernel/git/torvalds/linux.git/commit/?id=811c0830eb4ca8811ed80fe40378f622b9844835

----------------------------------------------------------------------

The actual size on wire for tso skb should be (gso_segs - 1) *
hdr + skb->len instead of skb->len, which can be seen by user using
'ethtool -S ethX' cmd, and 'Byte Queue Limit' also use the send size
stat to do the queue limiting, so add send_bytes in the desc_cb to
record the actual send size for a skb. And send_bytes is only for tx
desc_cb and page_offset is only for rx desc, so reuse the same space
for both of them.
Signed-off-by: NYunsheng Lin <linyunsheng@huawei.com>
Signed-off-by: NHuazhong Tan <tanhuazhong@huawei.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>
Reviewed-by: NYongxin Li <liyongxin1@huawei.com>
Signed-off-by: NJunxin Chen <chenjunxin1@huawei.com>
Signed-off-by: NZheng Zengkai <zhengzengkai@huawei.com>

mainline inclusion
from mainline-v5.13-rc1
commit 8fa86551
category: feature
bugzilla: 173966
CVE: NA

Reference: https://git.kernel.org/pub/scm/linux/kernel/git/torvalds/linux.git/commit/?id=8fa865510069aa1364f50761d38418dec4c163df

----------------------------------------------------------------------

Currently, the queue reset process needs to be performed one by
one, which is inefficient. However, the queue reset of the same
function is always performed at the same time. Therefore, according
to the UM, command HCLGE_OPC_CFG_RST_TRIGGER can be used to reset
all queues of the same function at a time, in order to optimize
the queue reset process.
Signed-off-by: NYufeng Mo <moyufeng@huawei.com>
Signed-off-by: NHuazhong Tan <tanhuazhong@huawei.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>
Reviewed-by: NYongxin Li <liyongxin1@huawei.com>
Signed-off-by: NJunxin Chen <chenjunxin1@huawei.com>
Signed-off-by: NZheng Zengkai <zhengzengkai@huawei.com>

mainline inclusion
from mainline-v5.13-rc1
commit 5be36fb7
category: bugfix
bugzilla: 173966
CVE: NA

Reference: https://git.kernel.org/pub/scm/linux/kernel/git/torvalds/linux.git/commit/?id=5be36fb7855442e0299cf483d40457315a84cdf1

----------------------------------------------------------------------

Currently, if user hasn't change channel number, the rss_size
is limited to be no more than the vector number, in order to
keep one vector only being mapped to one queue. But the queue
number of each tc can be different, and one vector also can
be mapped by multiple queues. So remove this limitation.
Signed-off-by: NJian Shen <shenjian15@huawei.com>
Signed-off-by: NHuazhong Tan <tanhuazhong@huawei.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>
Reviewed-by: NYongxin Li <liyongxin1@huawei.com>
Signed-off-by: NJunxin Chen <chenjunxin1@huawei.com>
Signed-off-by: NZheng Zengkai <zhengzengkai@huawei.com>

mainline inclusion
from mainline-v5.13-rc1
commit 64ff58fa
category: bugfix
bugzilla: 173966
CVE: NA

Reference: https://git.kernel.org/pub/scm/linux/kernel/git/torvalds/linux.git/commit/?id=64ff58fa3bfcf26bc893ea425a0553b561ca5298

----------------------------------------------------------------------

When new rule state is TO_ADD or ACTIVE, and there is already a
rule with same location in the fd_rule_list, the new rule will
be freed after modifying the old rule. It may cause user-after-free
issue when access rule again in hclge_add_fd_entry_common().

Fixes: fc4243b8 ("net: hns3: refactor flow director configuration")
Signed-off-by: NJian Shen <shenjian15@huawei.com>
Signed-off-by: NHuazhong Tan <tanhuazhong@huawei.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>
Reviewed-by: NYongxin Li <liyongxin1@huawei.com>
Signed-off-by: NJunxin Chen <chenjunxin1@huawei.com>
Signed-off-by: NZheng Zengkai <zhengzengkai@huawei.com>

mainline inclusion
from mainline-v5.13-rc1
commit 989f7178
category: bugfix
bugzilla: 173966
CVE: NA

Reference: https://git.kernel.org/pub/scm/linux/kernel/git/torvalds/linux.git/commit/?id=989f7178b06666ec23ada614b2047c21d85b2a0a

----------------------------------------------------------------------

Currently, when adding flow director rule, it missed to set
rule state. Which may cause the rule state in software is
unconsistent with hardware.

Fixes: fc4243b8 ("net: hns3: refactor flow director configuration")
Signed-off-by: NJian Shen <shenjian15@huawei.com>
Signed-off-by: NHuazhong Tan <tanhuazhong@huawei.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>
Reviewed-by: NYongxin Li <liyongxin1@huawei.com>
Signed-off-by: NJunxin Chen <chenjunxin1@huawei.com>
Signed-off-by: NZheng Zengkai <zhengzengkai@huawei.com>

mainline inclusion
from mainline-v5.13-rc1
commit 54422bd4
category: feature
bugzilla: 173966
CVE: NA

Reference: https://git.kernel.org/pub/scm/linux/kernel/git/torvalds/linux.git/commit/?id=54422bd436e084e6c74aff6026c1767f1570ab26

----------------------------------------------------------------------

drivers/net/ethernet/hisilicon/hns3/hns3pf/hclge_main.c: In function 'hclge_clear_arfs_rules':
drivers/net/ethernet/hisilicon/hns3/hns3pf/hclge_main.c:7173:1: error: no return statement in function returning non-void [-Werror=return-type]
 7173 | }
      | ^
cc1: some warnings being treated as errors
make[6]: *** [scripts/Makefile.build:273: drivers/net/ethernet/hisilicon/hns3/hns3pf/hclge_main.o] Error 1
make[5]: *** [scripts/Makefile.build:534: drivers/net/ethernet/hisilicon/hns3/hns3pf] Error 2
make[4]: *** [scripts/Makefile.build:534: drivers/net/ethernet/hisilicon/hns3] Error 2
make[4]: *** Waiting for unfinished jobs....
make[3]: *** [scripts/Makefile.build:534: drivers/net/ethernet/hisilicon] Error 2
make[2]: *** [scripts/Makefile.build:534: drivers/net/ethernet] Error 2
make[1]: *** [scripts/Makefile.build:534: drivers/net] Error 2
make[1]: *** Waiting for unfinished jobs....
make: *** [Makefile:1980: drivers] Error 2
Reported-by: NHulk Robot <hulkci@huawei.com>
Signed-off-by: NLiu Jian <liujian56@huawei.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>
Reviewed-by: NYongxin Li <liyongxin1@huawei.com>
Signed-off-by: NJunxin Chen <chenjunxin1@huawei.com>
Signed-off-by: NZheng Zengkai <zhengzengkai@huawei.com>

mainline inclusion
from mainline-v5.13-rc1
commit b1261897
category: feature
bugzilla: 173966
CVE: NA

Reference: https://git.kernel.org/pub/scm/linux/kernel/git/torvalds/linux.git/commit/?id=b1261897b0902d870c483fb006a9443723a3d58b

----------------------------------------------------------------------

hclge_tm_vport_tc_info_update() is bloated, so split it into
separate functions for readability and maintainability.
Signed-off-by: NGuojia Liao <liaoguojia@huawei.com>
Signed-off-by: NHuazhong Tan <tanhuazhong@huawei.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>
Reviewed-by: NYongxin Li <liyongxin1@huawei.com>
Signed-off-by: NJunxin Chen <chenjunxin1@huawei.com>
Signed-off-by: NZheng Zengkai <zhengzengkai@huawei.com>

mainline inclusion
from mainline-v5.13-rc1
commit 74d439b7
category: feature
bugzilla: 173966
CVE: NA

Reference: https://git.kernel.org/pub/scm/linux/kernel/git/torvalds/linux.git/commit/?id=74d439b74ad3e05780d4cf3ab047345b443f7e67

----------------------------------------------------------------------

hclge_reset_rebuild() is a bit too long. So add a new function
hclge_update_reset_level() to improve readability.
Signed-off-by: NYufeng Mo <moyufeng@huawei.com>
Signed-off-by: NHuazhong Tan <tanhuazhong@huawei.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>
Reviewed-by: NYongxin Li <liyongxin1@huawei.com>
Signed-off-by: NJunxin Chen <chenjunxin1@huawei.com>
Signed-off-by: NZheng Zengkai <zhengzengkai@huawei.com>

mainline inclusion
from mainline-v5.13-rc1
commit f7be24f0
category: feature
bugzilla: 173966
CVE: NA

Reference: https://git.kernel.org/pub/scm/linux/kernel/git/torvalds/linux.git/commit/?id=f7be24f00702cf07d025c79ab30a15f7d7db5cac

----------------------------------------------------------------------

s/sucessful/successful/
s/serivce/service/
and remove a redundant new.
Signed-off-by: NHuazhong Tan <tanhuazhong@huawei.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>
Reviewed-by: NYongxin Li <liyongxin1@huawei.com>
Signed-off-by: NJunxin Chen <chenjunxin1@huawei.com>
Signed-off-by: NZheng Zengkai <zhengzengkai@huawei.com>

mainline inclusion
from mainline-v5.13-rc1
commit a1e144d7
category: feature
bugzilla: 173966
CVE: NA

Reference: https://git.kernel.org/pub/scm/linux/kernel/git/torvalds/linux.git/commit/?id=a1e144d7dc3c55aa4d451e3a23cd8f34cd65ee01

----------------------------------------------------------------------

Correct a report warning in hns3_ethtool.c
Signed-off-by: NHuazhong Tan <tanhuazhong@huawei.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>
Reviewed-by: NYongxin Li <liyongxin1@huawei.com>
Signed-off-by: NJunxin Chen <chenjunxin1@huawei.com>
Signed-off-by: NZheng Zengkai <zhengzengkai@huawei.com>

mainline inclusion
from mainline-v5.13-rc1
commit 1e49432b
category: feature
bugzilla: 173966
CVE: NA

Reference: https://git.kernel.org/pub/scm/linux/kernel/git/torvalds/linux.git/commit/?id=1e49432b91d671fd690a6a99fcc082ae44b79faf

----------------------------------------------------------------------

Parameter cm_buf is never used, so remove it.
Signed-off-by: NHuazhong Tan <tanhuazhong@huawei.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>
Reviewed-by: NYongxin Li <liyongxin1@huawei.com>
Signed-off-by: NJunxin Chen <chenjunxin1@huawei.com>
Signed-off-by: NZheng Zengkai <zhengzengkai@huawei.com>

mainline inclusion
from mainline-v5.13-rc1
commit 567d1dd3
category: feature
bugzilla: 173966
CVE: NA

Reference: https://git.kernel.org/pub/scm/linux/kernel/git/torvalds/linux.git/commit/?id=567d1dd3e4bc204e424553ccf2e1d47b0f5d03a8

----------------------------------------------------------------------

Parameter vf in hclge_set_vf_vlan_common() is unused now,
so remove it.
Signed-off-by: NPeng Li <lipeng321@huawei.com>
Signed-off-by: NHuazhong Tan <tanhuazhong@huawei.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>
Reviewed-by: NYongxin Li <liyongxin1@huawei.com>
Signed-off-by: NJunxin Chen <chenjunxin1@huawei.com>
Signed-off-by: NZheng Zengkai <zhengzengkai@huawei.com>

mainline inclusion
from mainline-v5.13-rc1
commit d914971d
category: feature
bugzilla: 173966
CVE: NA

Reference: https://git.kernel.org/pub/scm/linux/kernel/git/torvalds/linux.git/commit/?id=d914971df022e7abdb5f8fdfd901a655c9786c05

----------------------------------------------------------------------

According to the HW manual, the query operation is unnecessary
when the TM QCN error event is enabled, so remove it.
Signed-off-by: Jiaran Zhang <zhangjiaran@huawei.com>
Signed-off-by: NHuazhong Tan <tanhuazhong@huawei.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>
Reviewed-by: NYongxin Li <liyongxin1@huawei.com>
Signed-off-by: NJunxin Chen <chenjunxin1@huawei.com>
Signed-off-by: NZheng Zengkai <zhengzengkai@huawei.com>

mainline inclusion
from mainline-v5.13-rc1
commit c0127115
category: feature
bugzilla: 173966
CVE: NA

Reference: https://git.kernel.org/pub/scm/linux/kernel/git/torvalds/linux.git/commit/?id=c0127115ee2329dd57a65dceb139ec7cc39f48c7

----------------------------------------------------------------------

Remove some redundant blank lines.
Signed-off-by: NPeng Li <lipeng321@huawei.com>
Signed-off-by: NHuazhong Tan <tanhuazhong@huawei.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>
Reviewed-by: NYongxin Li <liyongxin1@huawei.com>
Signed-off-by: NJunxin Chen <chenjunxin1@huawei.com>
Signed-off-by: NZheng Zengkai <zhengzengkai@huawei.com>

mainline inclusion
from mainline-v5.13-rc1
commit 43f8b933
category: feature
bugzilla: 173966
CVE: NA

Reference: https://git.kernel.org/pub/scm/linux/kernel/git/torvalds/linux.git/commit/?id=43f8b9333d86d4e3a42e55a6e41c78c249ac0216

----------------------------------------------------------------------

Vmdq is not supported yet, the num_vmdq_vport is always 0,
it's a bit confusing when using the num_vport, so remove
these unused codes of vmdq.
Reported-by: NDan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: NJian Shen <shenjian15@huawei.com>
Signed-off-by: NHuazhong Tan <tanhuazhong@huawei.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>
Reviewed-by: NYongxin Li <liyongxin1@huawei.com>
Signed-off-by: NJunxin Chen <chenjunxin1@huawei.com>
Signed-off-by: NZheng Zengkai <zhengzengkai@huawei.com>

mainline inclusion
from mainline-v5.13-rc1
commit 67b0e142
category: feature
bugzilla: 173966
CVE: NA

Reference: https://git.kernel.org/pub/scm/linux/kernel/git/torvalds/linux.git/commit/?id=67b0e1428e2f592c0fc2c7f682a5a049158782b8

----------------------------------------------------------------------

For DEVICE_VERSION_V3, the hardware supports to match specified
data in the specified offset of packet payload. Each layer can
have one offset, and can't be masked when configure flow director
rule by ethtool command. The layer is selected based on the
flow-type, ether for L2, ip4/ipv6 for L3, and tcp4/tcp6/udp4/udp6
for L4. For example, tcp4/tcp6/udp4/udp6 rules share the same
user-def offset, but each rule can have its own user-def value.

For the user-def field of ethtool -N/U command is 64 bits long.
The bit 0~15 is used for user-def value, and bit 32~47 for user-def
offset in HNS3 driver.
Signed-off-by: NJian Shen <shenjian15@huawei.com>
Signed-off-by: NHuazhong Tan <tanhuazhong@huawei.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>
Reviewed-by: NYongxin Li <liyongxin1@huawei.com>
Signed-off-by: NJunxin Chen <chenjunxin1@huawei.com>
Signed-off-by: NZheng Zengkai <zhengzengkai@huawei.com>

mainline inclusion
from mainline-v5.13-rc1
commit f07203b0
category: feature
bugzilla: 173966
CVE: NA

Reference: https://git.kernel.org/pub/scm/linux/kernel/git/torvalds/linux.git/commit/?id=f07203b0180f62791371cb50fb1afacd826250fc

----------------------------------------------------------------------

For only PF driver can configure flow director rule, it's
better to call hclge_del_all_fd_entries() directly in hclge
layer, rather than call hns3_del_all_fd_entries() in hns3
layer. Then the ae_algo->ops.del_all_fd_entries can be removed.
Signed-off-by: NJian Shen <shenjian15@huawei.com>
Signed-off-by: NHuazhong Tan <tanhuazhong@huawei.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>
Reviewed-by: NYongxin Li <liyongxin1@huawei.com>
Signed-off-by: NJunxin Chen <chenjunxin1@huawei.com>
Signed-off-by: NZheng Zengkai <zhengzengkai@huawei.com>

mainline inclusion
from mainline-v5.13-rc1
commit fc4243b8
category: feature
bugzilla: 173966
CVE: NA

Reference: https://git.kernel.org/pub/scm/linux/kernel/git/torvalds/linux.git/commit/?id=fc4243b8de8b4e7170f07f2660dcab3f8ecda0e9

----------------------------------------------------------------------

Currently, the flow director rule of aRFS is configured in
the IO path. It's time-consuming. So move out the configuration,
and configure it asynchronously. And keep ethtool and tc flower
rule using synchronous way, otherwise the application maybe
unable to know the rule is installed or pending.

Add a state member for each flow director rule to indicate the
rule state. There are 4 states:
TO_ADD: the rule is waiting to add to hardware
TO_DEL: the rule is waiting to remove from hardware
DELETED: the rule has been removed from hardware. It's a middle
        state, used to remove the rule node in the fd_rule_list.
ACTIVE: the rule is already added in hardware

For asynchronous way, when receive a new request to add or delete
flow director rule by aRFS, update the rule list, then request to
schedule the service task to finish the configuration.

For synchronous way, when receive a new request to add or delete
flow director rule by ethtool or tc flower, configure hardware
directly, then update the rule list if success.
Signed-off-by: NJian Shen <shenjian15@huawei.com>
Signed-off-by: NHuazhong Tan <tanhuazhong@huawei.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>
Reviewed-by: NYongxin Li <liyongxin1@huawei.com>
Signed-off-by: NJunxin Chen <chenjunxin1@huawei.com>
Signed-off-by: NZheng Zengkai <zhengzengkai@huawei.com>

mainline inclusion
from mainline-v5.13-rc1
commit ae481191
category: feature
bugzilla: 173966
CVE: NA

Reference: https://git.kernel.org/pub/scm/linux/kernel/git/torvalds/linux.git/commit/?id=ae4811913f576d3a891e2ca8a3ad11746f644c69

----------------------------------------------------------------------

The hardware supports to parse and match the traffic class field
of IPv6 packet for flow director, uses the same tuple as ip tos.
So removes the limitation of configure 'tclass' by driver.
Signed-off-by: NJian Shen <shenjian15@huawei.com>
Signed-off-by: NHuazhong Tan <tanhuazhong@huawei.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>
Reviewed-by: NYongxin Li <liyongxin1@huawei.com>
Signed-off-by: NJunxin Chen <chenjunxin1@huawei.com>
Signed-off-by: NZheng Zengkai <zhengzengkai@huawei.com>

mainline inclusion
from mainline-v5.13-rc1
commit fb72699d
category: feature
bugzilla: 173966
CVE: NA

Reference: https://git.kernel.org/pub/scm/linux/kernel/git/torvalds/linux.git/commit/?id=fb72699dfef8706abe203ec8c8fc69a023c161ce

----------------------------------------------------------------------

Currently, there are too many branches for hclge_fd_convert_tuple().
And it may be more when add new tuples. Refactor it by sorting the
tuples according to their length. So it only needs several KEY_OPT
now, and being flexible to add new tuples.
Signed-off-by: NJian Shen <shenjian15@huawei.com>
Signed-off-by: NHuazhong Tan <tanhuazhong@huawei.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>
Reviewed-by: NYongxin Li <liyongxin1@huawei.com>
Signed-off-by: NJunxin Chen <chenjunxin1@huawei.com>
Signed-off-by: NZheng Zengkai <zhengzengkai@huawei.com>

mainline inclusion
from mainline-v5.13-rc1
commit 74b755d1
category: feature
bugzilla: 173966
CVE: NA

Reference: https://git.kernel.org/pub/scm/linux/kernel/git/torvalds/linux.git/commit/?id=74b755d1dbf1c4ff6f0cc4513e573eb15c0e7dfc

----------------------------------------------------------------------

The process of function hclge_fd_get_tuple() is complex and
prolix. To make it more readable, extract the process of each
flow-type tuple to a single function.
Signed-off-by: NJian Shen <shenjian15@huawei.com>
Signed-off-by: NHuazhong Tan <tanhuazhong@huawei.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>
Reviewed-by: NYongxin Li <liyongxin1@huawei.com>
Signed-off-by: NJunxin Chen <chenjunxin1@huawei.com>
Signed-off-by: NZheng Zengkai <zhengzengkai@huawei.com>

mainline inclusion
from mainline-v5.13-rc1
commit 5f2b1238
category: feature
bugzilla: 173966
CVE: NA

Reference: https://git.kernel.org/pub/scm/linux/kernel/git/torvalds/linux.git/commit/?id=5f2b1238b33c38478ddc55536b65277b30f5d456

----------------------------------------------------------------------

The process of function hclge_add_fd_entry() is complex and
prolix. To make it more readable, extract the process of
fs->ring_cookie to a single function.
Signed-off-by: NJian Shen <shenjian15@huawei.com>
Signed-off-by: NHuazhong Tan <tanhuazhong@huawei.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>
Reviewed-by: NYongxin Li <liyongxin1@huawei.com>
Signed-off-by: NJunxin Chen <chenjunxin1@huawei.com>
Signed-off-by: NZheng Zengkai <zhengzengkai@huawei.com>

mainline inclusion
from mainline-v5.13-rc1
commit b47cfe1f
category: feature
bugzilla: 173966
CVE: NA

Reference: https://git.kernel.org/pub/scm/linux/kernel/git/torvalds/linux.git/commit/?id=b47cfe1f402dbf10279b8f12131388fdff9d2259

----------------------------------------------------------------------

If the imp-controlled PHYs feature is enabled, driver can not
call phy driver interface to set loopback anymore and needs
to send command to firmware to start phy loopback.

Driver reuses the existing firmware command 0x0315 to start
phy loopback, just add a setting bit in this command. As this
command is not only for serdes loopback anymore, rename this
command to "xxx_COMMON_LOOPBACK", and modify function name,
macro name and logs related to it.
Signed-off-by: NGuangbin Huang <huangguangbin2@huawei.com>
Signed-off-by: NHuazhong Tan <tanhuazhong@huawei.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>
Reviewed-by: NYongxin Li <liyongxin1@huawei.com>
Signed-off-by: NJunxin Chen <chenjunxin1@huawei.com>
Signed-off-by: NZheng Zengkai <zhengzengkai@huawei.com>