Currently, the priority queues attempt to be 'fair' to lower priority
tasks by scheduling them after a certain number of higher priority tasks
have run. The problem is that both the transport send queue and
the NFSv4.1 session slot queue have strong ordering requirements.

This patch therefore removes the fairness code in favour of strong
ordering of task priorities.
Signed-off-by: NTrond Myklebust <Trond.Myklebust@netapp.com>

Currently, we see a lot of bouncing for the value of highest_used_slotid
due to the fact that slots are getting freed, instead of getting instantly
transmitted to the next waiting task.
Signed-off-by: NTrond Myklebust <Trond.Myklebust@netapp.com>

Pre-condition for optimising the slot allocation and reintroducing FIFO
behaviour.
Signed-off-by: NTrond Myklebust <Trond.Myklebust@netapp.com>

We want to preserve the rpc_task priority for things like writebacks,
that may have differing levels of urgency.
Signed-off-by: NTrond Myklebust <Trond.Myklebust@netapp.com>

All it does is pass its arguments through to another function.  Let's
cut out the middleman...
Signed-off-by: NBryan Schumaker <bjschuma@netapp.com>
Signed-off-by: NTrond Myklebust <Trond.Myklebust@netapp.com>

Privileged rpc calls are those that are run by the state recovery thread,
in cases where we're trying to recover the system after a server reboot
or a network partition. In those cases, we want to fence off all other
rpc calls (see nfs4_begin_drain_session()) so that they don't end up
using stateids or clientids that are in the process of being recovered.

Prior to this patch, we had to set up special callback functions in
order to declare an rpc call as being privileged.
By adding a new field to the sequence arguments, this patch simplifies
things considerably, and allows us to declare the rpc call as privileged
before it is run.
Signed-off-by: NTrond Myklebust <Trond.Myklebust@netapp.com>

It is more important to preserve the task priority behaviour, which ensures
that things like reclaim writes take precedence over background and kupdate
writes.
Signed-off-by: NTrond Myklebust <Trond.Myklebust@netapp.com>

Move all the sleep-and-exit cases into a single section of code.
Signed-off-by: NTrond Myklebust <Trond.Myklebust@netapp.com>

We shouldn't need to pass the 'cache_reply' parameter if we
initialise the sequence_args/sequence_res in the caller.
Signed-off-by: NTrond Myklebust <Trond.Myklebust@netapp.com>

Nobody calls nfs4_setup_sequence or nfs41_setup_sequence without
also calling rpc_call_start() on success. This commit therefore
folds the rpc_call_start call into nfs41_setup_sequence().
Signed-off-by: NTrond Myklebust <Trond.Myklebust@netapp.com>

There is no point in using nfs4_setup_sequence or nfs4_sequence_done
in pure NFSv4.1 functions. We already know that those have sessions...
Signed-off-by: NTrond Myklebust <Trond.Myklebust@netapp.com>

If the server requests a lower target_highest_slotid, then ensure
that we ping it with at least one RPC call containing an
appropriate SEQUENCE op. This ensures that the server won't need to
send a recall callback in order to shrink the slot table.
Signed-off-by: NTrond Myklebust <Trond.Myklebust@netapp.com>

This means that we end up statically allocating 128 bytes for the
bitmap on each slot table.
For a server that supports 1MB write and read I/O sizes this means
that we can completely fill the maximum 1GB TCP send/receive
windows.
Signed-off-by: NTrond Myklebust <Trond.Myklebust@netapp.com>

Clean up. Gather NFSv4.1 slot definitions in fs/nfs/nfs4session.h.
Signed-off-by: NTrond Myklebust <Trond.Myklebust@netapp.com>

Signed-off-by: NTrond Myklebust <Trond.Myklebust@netapp.com>

NFSv4.1 session management is getting complex enough to deserve
a separate file.
Signed-off-by: NTrond Myklebust <Trond.Myklebust@netapp.com>

nfs4_wait_clnt_recover and nfs4_client_recover_expired_lease are both
generic state related functions. As such, they belong in nfs4state.c,
and not nfs4proc.c
Signed-off-by: NTrond Myklebust <Trond.Myklebust@netapp.com>

Coalesce nfs4_check_drain_bc_complete and nfs4_check_drain_fc_complete
into a single function that can be called when the slot table is known
to be empty, then change nfs4_callback_free_slot() and nfs4_free_slot()
to use it.
Signed-off-by: NTrond Myklebust <Trond.Myklebust@netapp.com>

If the NFSv4.1 session slot allocation fails due to an ENOMEM condition,
then set the task->tk_timeout to 1/4 second to ensure that we do retry
the slot allocation more quickly.
Signed-off-by: NTrond Myklebust <Trond.Myklebust@netapp.com>

RFC5661 requires us to make sure that the server knows we've updated
our slot table size by sending at least one SEQUENCE op containing the
new 'highest_slotid' value.
We can do so using the 'CHECK_LEASE' functionality of the state
manager.
Signed-off-by: NTrond Myklebust <Trond.Myklebust@netapp.com>

The state manager no longer needs any special machinery to stop the
session flow and resize the slot table. It is all done on the fly by
the SEQUENCE op code now.
Signed-off-by: NTrond Myklebust <Trond.Myklebust@netapp.com>

Instead of an array of slots, use a singly linked list of slots that
can be dynamically appended to or shrunk.
Signed-off-by: NTrond Myklebust <Trond.Myklebust@netapp.com>

Allow the server to control the size of the session slot table
by adjusting the value of sr_target_max_slots in the reply to the
SEQUENCE operation.
Signed-off-by: NTrond Myklebust <Trond.Myklebust@netapp.com>

If the server wants to leave us with only one slot, or it wants
to "shrink" our slot table to something larger than we have now,
then so be it.
Signed-off-by: NTrond Myklebust <Trond.Myklebust@netapp.com>

Don't confuse the table size and the target_highest_slotid...
Signed-off-by: NTrond Myklebust <Trond.Myklebust@netapp.com>

Ensure that the NFSv4.1 CB_RECALL_SLOT callback updates the slot table
target max slotid safely.
Signed-off-by: NTrond Myklebust <Trond.Myklebust@netapp.com>

When the server tells us that it is dynamically resizing the session
replay cache, we should reset the sequence number for those slots
that have been deallocated.
Signed-off-by: NTrond Myklebust <Trond.Myklebust@netapp.com>

Dynamic slot allocation in NFSv4.1 depends on the client being able to
track the server's target value for the highest slotid in the
slot table.  See the reference in Section 2.10.6.1 of RFC5661.

To avoid ordering problems in the case where 2 SEQUENCE replies contain
conflicting updates to this target value, we also introduce a generation
counter, to track whether or not an RPC containing a SEQUENCE operation
was launched before or after the last update.

Also rename the nfs4_slot_table target_max_slots field to
'target_highest_slotid' to avoid confusion with a slot
table size or number of slots.
Signed-off-by: NTrond Myklebust <Trond.Myklebust@netapp.com>

Change the argument to take the pointer to the slot, instead of
just the slotid.

We know that the new value of highest_used_slot must be less than
the current value. No need to scan the whole table.
Signed-off-by: NTrond Myklebust <Trond.Myklebust@netapp.com>

Clean up the NFSv4.1 slot allocation by replacing nfs_find_slot() with
a function nfs_alloc_slot() that returns a pointer to the nfs4_slot
instead of an offset into the slot table.
Signed-off-by: NTrond Myklebust <Trond.Myklebust@netapp.com>

Replace the session pointer + slotid with a pointer to the
allocated slot.
Signed-off-by: NTrond Myklebust <Trond.Myklebust@netapp.com>

Instead of doing slot table pointer gymnastics every time we want to
know which slot we're using.
Signed-off-by: NTrond Myklebust <Trond.Myklebust@netapp.com>

Move the session pointer into the slot table, then have struct nfs4_slot
point to that slot table.
Signed-off-by: NTrond Myklebust <Trond.Myklebust@netapp.com>

Store the renewal time inside the session slot instead.
Signed-off-by: NTrond Myklebust <Trond.Myklebust@netapp.com>

Signed-off-by: NTrond Myklebust <Trond.Myklebust@netapp.com>

All that memory is going to be initialised to non-zero by
nfs4_add_and_init_slots anyway.
Signed-off-by: NTrond Myklebust <Trond.Myklebust@netapp.com>

We must always bump the clientid sequence number after a successful
call to CREATE_SESSION on the server. The result of
nfs4_verify_channel_attrs() is irrelevant to that requirement.
Signed-off-by: NTrond Myklebust <Trond.Myklebust@netapp.com>

If we're mounting a new filesystem, ensure that the session has negotiated
large enough request and reply sizes to match the wsize and rsize mount
arguments.
Signed-off-by: NTrond Myklebust <Trond.Myklebust@netapp.com>

Don't store the target request and response sizes in the same
variables used to store the server's replies to those targets.
Signed-off-by: NTrond Myklebust <Trond.Myklebust@netapp.com>

We can't send a SEQUENCE op unless the session is OK, so it is pointless
to handle the CHECK_LEASE state before we've dealt with SESSION_RESET
and BIND_CONN_TO_SESSION.
Signed-off-by: NTrond Myklebust <Trond.Myklebust@netapp.com>