Dynamically add entries to the associativity lookup array

The ibm,associativity-lookup-arrays property may only contain
associativity arrays for LMBs present at boot time. When hotplug
adding a LMB its associativity array may not be in the associativity
lookup array, this patch adds the ability to add new entries to the
associativity lookup array.
Signed-off-by: NNathan Fontenot <nfont@linux.vnet.ibm.com>
Signed-off-by: NMichael Ellerman <mpe@ellerman.id.au>

Move property cloning code into its own routine

Split the pieces of dlpar_clone_drconf_property() that create a copy of
the property struct into its own routine. This allows for creating
clones of more than just the ibm,dynamic-memory property used in memory
hotplug.
Signed-off-by: NNathan Fontenot <nfont@linux.vnet.ibm.com>
Signed-off-by: NMichael Ellerman <mpe@ellerman.id.au>

The pseries HVC early debug options, CONFIG_PPC_EARLY_DEBUG_LPAR and
CONFIG_PPC_EARLY_DEBUG_LPAR_HVSI both require code that is part of the
hvc driver. If we turn them on but not CONFIG_HVC_CONSOLE then we get:

  arch/powerpc/kernel/built-in.o: In function `.udbg_early_init':
  arch/powerpc/kernel/built-in.o:(.debug_addr+0x9a00): undefined reference to `udbg_init_debug_lpar'

Similarly for HVSI. So make them both depend on CONFIG_HVC_CONSOLE.
Signed-off-by: NMichael Ellerman <mpe@ellerman.id.au>

At the start of __tm_recheckpoint() we save the kernel stack pointer
(r1) in SPRG SCRATCH0 (SPRG2) so that we can restore it after the
trecheckpoint.

Unfortunately, the same SPRG is used in the SLB miss handler.  If an
SLB miss is taken between the save and restore of r1 to the SPRG, the
SPRG is changed and hence r1 is also corrupted.  We can end up with
the following crash when we start using r1 again after the restore
from the SPRG:

  Oops: Bad kernel stack pointer, sig: 6 [#1]
  SMP NR_CPUS=2048 NUMA pSeries
  CPU: 658 PID: 143777 Comm: htm_demo Tainted: G            EL   X 4.4.13-0-default #1
  task: c0000b56993a7810 ti: c00000000cfec000 task.ti: c0000b56993bc000
  NIP: c00000000004f188 LR: 00000000100040b8 CTR: 0000000010002570
  REGS: c00000000cfefd40 TRAP: 0300   Tainted: G            EL   X  (4.4.13-0-default)
  MSR: 8000000300001033 <SF,ME,IR,DR,RI,LE>  CR: 02000424  XER: 20000000
  CFAR: c000000000008468 DAR: 00003ffd84e66880 DSISR: 40000000 SOFTE: 0
  PACATMSCRATCH: 00003ffbc865e680
  GPR00: fffffffcfabc4268 00003ffd84e667a0 00000000100d8c38 000000030544bb80
  GPR04: 0000000000000002 00000000100cf200 0000000000000449 00000000100cf100
  GPR08: 000000000000c350 0000000000002569 0000000000002569 00000000100d6c30
  GPR12: 00000000100d6c28 c00000000e6a6b00 00003ffd84660000 0000000000000000
  GPR16: 0000000000000003 0000000000000449 0000000010002570 0000010009684f20
  GPR20: 0000000000800000 00003ffd84e5f110 00003ffd84e5f7a0 00000000100d0f40
  GPR24: 0000000000000000 0000000000000000 0000000000000000 00003ffff0673f50
  GPR28: 00003ffd84e5e960 00000000003d0f00 00003ffd84e667a0 00003ffd84e5e680
  NIP [c00000000004f188] restore_gprs+0x110/0x17c
  LR [00000000100040b8] 0x100040b8
  Call Trace:
  Instruction dump:
  f8a1fff0 e8e700a8 38a00000 7ca10164 e8a1fff8 e821fff0 7c0007dd 7c421378
  7db142a6 7c3242a6 38800002 7c810164 <e9c100e0> e9e100e8 ea0100f0 ea2100f8

We hit this on large memory machines (> 2TB) but it can also be hit on
smaller machines when 1TB segments are disabled.

To hit this, you also need to be virtualised to ensure SLBs are
periodically removed by the hypervisor.

This patches moves the saving of r1 to the SPRG to the region where we
are guaranteed not to take any further SLB misses.

Fixes: 98ae22e1 ("powerpc: Add helper functions for transactional memory context switching")
Cc: stable@vger.kernel.org # v3.9+
Signed-off-by: NMichael Neuling <mikey@neuling.org>
Acked-by: NCyril Bur <cyrilbur@gmail.com>
Signed-off-by: NMichael Ellerman <mpe@ellerman.id.au>

Pull in the fixes we sent during 4.7, we have code we want to merge into
next that depends on some of them.

powernv marks it's halt and restart calls as __noreturn. However,
ppc_md does not have this annotation. Add the annotation to ppc_md,
and then to every halt/restart function that is missing it.

Additionally, I have verified that all of these functions do not
return. Occasionally I have added a spin loop to be sure.
Signed-off-by: NDaniel Axtens <dja@axtens.net>
Signed-off-by: NMichael Ellerman <mpe@ellerman.id.au>

Explicitly give sparse an endianness in the Makefile, so that it
doesn't get confused.

Normally we have #ifdef one and #else the other, so it doesn't usually
matter, but we have been bitten by it before, and indeed this patch
fixes a number of sparse errors.
Suggested-by: NArnd Bergmann <arnd@arndb.de>
Signed-off-by: NDaniel Axtens <dja@axtens.net>
Signed-off-by: NMichael Ellerman <mpe@ellerman.id.au>

kvmppc_h_put_tce_indirect labels a u64 pointer as __user. It also
labelled the u64 where get_user puts the result as __user. This isn't
a pointer and so doesn't need to be labelled __user.

Split the u64 value definition onto a new line to make it clear that
it doesn't get the annotation.
Signed-off-by: NDaniel Axtens <dja@axtens.net>
Signed-off-by: NMichael Ellerman <mpe@ellerman.id.au>

The FROZEN transitions are used when a CPU suspends/resumes. In case
of a suspend/resume, only the up prepare (CPU_UP_PREPARE_FROZEN) is
handled. The error handling transition CPU_UP_CANCELED_FROZEN as well
as the CPU_ONLINE_FROZEN transition are not handled.

Masking the switch case action argument with ~CPU_TASKS_FROZEN, to
handle all FROZEN tasks the same way than the corresponding non frozen
tasks.

Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Cc: linuxppc-dev@lists.ozlabs.org
Signed-off-by: NAnna-Maria Gleixner <anna-maria@linutronix.de>
Signed-off-by: NMichael Ellerman <mpe@ellerman.id.au>

Add a new API, cxl_check_and_switch_mode() to allow for switching of
bi-modal CAPI cards, such as the Mellanox CX-4 network card.

When a driver requests to switch a card to CAPI mode, use PCI hotplug
infrastructure to remove all PCI devices underneath the slot. We then write
an updated mode control register to the CAPI VSEC, hot reset the card, and
reprobe the card.

As the card may present a different set of PCI devices after the mode
switch, use the infrastructure provided by the pnv_php driver and the OPAL
PCI slot management facilities to ensure that:

  * the old devices are removed from both the OPAL and Linux device trees
  * the new devices are probed by OPAL and added to the OPAL device tree
  * the new devices are added to the Linux device tree and probed through
    the regular PCI device probe path

As such, introduce a new option, CONFIG_CXL_BIMODAL, with a dependency on
the pnv_php driver.

Refactor existing code that touches the mode control register in the
regular single mode case into a new function, setup_cxl_protocol_area().
Co-authored-by: NIan Munsie <imunsie@au1.ibm.com>
Cc: Gavin Shan <gwshan@linux.vnet.ibm.com>
Signed-off-by: NAndrew Donnellan <andrew.donnellan@au1.ibm.com>
Signed-off-by: NIan Munsie <imunsie@au1.ibm.com>
Reviewed-by: NGavin Shan <gwshan@linux.vnet.ibm.com>
Signed-off-by: NMichael Ellerman <mpe@ellerman.id.au>

When calling pnv_php_set_slot_power_state() with state ==
OPAL_PCI_SLOT_OFFLINE, remove devices from the device tree as if we're
dealing with OPAL_PCI_SLOT_POWER_OFF.

Cc: Gavin Shan <gwshan@linux.vnet.ibm.com>
Cc: linux-pci@vger.kernel.org
Cc: Bjorn Helgaas <bhelgaas@google.com>
Signed-off-by: NAndrew Donnellan <andrew.donnellan@au1.ibm.com>
Signed-off-by: NIan Munsie <imunsie@au1.ibm.com>
Acked-by: NGavin Shan <gwshan@linux.vnet.ibm.com>
Signed-off-by: NMichael Ellerman <mpe@ellerman.id.au>

The cxl driver will use infrastructure from pnv_php to handle device tree
updates when switching bi-modal CAPI cards into CAPI mode.

To enable this, export pnv_php_find_slot() and
pnv_php_set_slot_power_state(), and add corresponding declarations, as well
as the definition of struct pnv_php_slot, to asm/pnv-pci.h.

Cc: Gavin Shan <gwshan@linux.vnet.ibm.com>
Cc: linux-pci@vger.kernel.org
Cc: Bjorn Helgaas <bhelgaas@google.com>
Signed-off-by: NAndrew Donnellan <andrew.donnellan@au1.ibm.com>
Signed-off-by: NIan Munsie <imunsie@au1.ibm.com>
Acked-by: NGavin Shan <gwshan@linux.vnet.ibm.com>
Signed-off-by: NMichael Ellerman <mpe@ellerman.id.au>

The CX4 card cannot cope with a context with PE=0 due to a hardware
limitation, resulting in:

[   34.166577] command failed, status limits exceeded(0x8), syndrome 0x5a7939
[   34.166580] mlx5_core 0000:01:00.1: Failed allocating uar, aborting

Since the kernel API allocates a default context very early during
device init that will almost certainly get Process Element ID 0 there is
no easy way for us to extend the API to allow the Mellanox to inform us
of this limitation ahead of time.

Instead, work around the issue by extending the XSL structure to include
a minimum PE to allocate. Although the bug is not in the XSL, it is the
easiest place to work around this limitation given that the CX4 is
currently the only card that uses an XSL.
Signed-off-by: NIan Munsie <imunsie@au1.ibm.com>
Reviewed-by: NAndrew Donnellan <andrew.donnellan@au1.ibm.com>
Reviewed-by: NFrederic Barrat <fbarrat@linux.vnet.ibm.com>
Signed-off-by: NMichael Ellerman <mpe@ellerman.id.au>

The Mellanox CX4 in cxl mode uses a hybrid interrupt model, where
interrupts are routed from the networking hardware to the XSL using the
MSIX table, and from there will be transformed back into an MSIX
interrupt using the cxl style interrupts (i.e. using IVTE entries and
ranges to map a PE and AFU interrupt number to an MSIX address).

We want to hide the implementation details of cxl interrupts as much as
possible. To this end, we use a special version of the MSI setup &
teardown routines in the PHB while in cxl mode to allocate the cxl
interrupts and configure the IVTE entries in the process element.

This function does not configure the MSIX table - the CX4 card uses a
custom format in that table and it would not be appropriate to fill that
out in generic code. The rest of the functionality is similar to the
"Full MSI-X mode" described in the CAIA, and this could be easily
extended to support other adapters that use that mode in the future.

The interrupts will be associated with the default context. If the
maximum number of interrupts per context has been limited (e.g. by the
mlx5 driver), it will automatically allocate additional kernel contexts
to associate extra interrupts as required. These contexts will be
started using the same WED that was used to start the default context.
Signed-off-by: NIan Munsie <imunsie@au1.ibm.com>
Reviewed-by: NAndrew Donnellan <andrew.donnellan@au1.ibm.com>
Signed-off-by: NMichael Ellerman <mpe@ellerman.id.au>

The Mellanox CX4 has a hardware limitation where only 4 bits of the
AFU interrupt number can be passed to the XSL when sending an interrupt,
limiting it to only 15 interrupts per context (AFU interrupt number 0 is
invalid).

In order to overcome this, we will allocate additional contexts linked
to the default context as extra address space for the extra interrupts -
this will be implemented in the next patch.

This patch adds the preliminary support to allow this, by way of adding
a linked list in the context structure that we use to keep track of the
contexts dedicated to interrupts, and an API to simultaneously iterate
over the related context structures, AFU interrupt numbers and hardware
interrupt numbers. The point of using a single API to iterate these is
to hide some of the details of the iteration from external code, and to
reduce the number of APIs that need to be exported via base.c to allow
built in code to call.
Signed-off-by: NIan Munsie <imunsie@au1.ibm.com>
Reviewed-by: NFrederic Barrat <fbarrat@linux.vnet.ibm.com>
Reviewed-by: NAndrew Donnellan <andrew.donnellan@au1.ibm.com>
Signed-off-by: NMichael Ellerman <mpe@ellerman.id.au>

These APIs will be used by the Mellanox CX4 support. While they function
standalone to configure existing behaviour, their primary purpose is to
allow the Mellanox driver to inform the cxl driver of a hardware
limitation, which will be used in a future patch.
Signed-off-by: NIan Munsie <imunsie@au1.ibm.com>
Reviewed-by: NFrederic Barrat <fbarrat@linux.vnet.ibm.com>
Reviewed-by: NAndrew Donnellan <andrew.donnellan@au1.ibm.com>
Signed-off-by: NMichael Ellerman <mpe@ellerman.id.au>

This hooks up support for using the kernel API with a real PHB. After
the AFU initialisation has completed it calls into the PHB code to pass
it the AFU that will be used by other peer physical functions on the
adapter.

The cxl_pci_to_afu API is extended to work with peer PCI devices,
retrieving the peer AFU from the PHB. This API may also now return an
error if it is called on a PCI device that is not associated with either
a cxl vPHB or a peer PCI device to an AFU, and this error is propagated
down.
Signed-off-by: NIan Munsie <imunsie@au1.ibm.com>
Reviewed-by: NAndrew Donnellan <andrew.donnellan@au1.ibm.com>
Signed-off-by: NMichael Ellerman <mpe@ellerman.id.au>

This adds support for the peer model of the cxl kernel api to the
PowerNV PHB, in which physical function 0 represents the cxl function on
the card (an XSL in the case of the CX4), which other physical functions
will use for memory access and interrupt services. It is referred to as
the peer model as these functions are peers of one another, as opposed
to the Virtual PHB model which forms a hierarchy.

This patch exports APIs to enable the peer mode, check if a PCI device
is attached to a PHB in this mode, and to set and get the peer AFU for
this mode.

The cxl driver will enable this mode for supported cards by calling
pnv_cxl_enable_phb_kernel_api(). This will set a flag in the PHB to note
that this mode is enabled, and switch out it's controller_ops for the
cxl version.

The cxl version of the controller_ops struct implements it's own
versions of the enable_device_hook and release_device to handle
refcounting on the peer AFU and to allocate a default context for the
device.

Once enabled, the cxl kernel API may not be disabled on a PHB. Currently
there is no safe way to disable cxl mode short of a reboot, so until
that changes there is no reason to support the disable path.
Signed-off-by: NIan Munsie <imunsie@au1.ibm.com>
Reviewed-by: NAndrew Donnellan <andrew.donnellan@au1.ibm.com>
Signed-off-by: NMichael Ellerman <mpe@ellerman.id.au>

The vPHB model of the cxl kernel API is a hierarchy where the AFU is
represented by the vPHB, and it's AFU configuration records are exposed
as functions under that vPHB. If there are no AFU configuration records
we will create a vPHB with nothing under it, which is a waste of
resources and will opt us into EEH handling despite not having anything
special to handle.

This also does not make sense for cards using the peer model of the cxl
kernel API, where the other functions of the device are exposed via
additional peer physical functions rather than AFU configuration
records. This model will also not work with the existing EEH handling in
the cxl driver, as that is designed around the vPHB model.

Skip creating the vPHB for AFUs without any AFU configuration records,
and opt out of EEH handling for them.
Signed-off-by: NIan Munsie <imunsie@au1.ibm.com>
Reviewed-by: NAndrew Donnellan <andrew.donnellan@au1.ibm.com>
Signed-off-by: NMichael Ellerman <mpe@ellerman.id.au>

The cxl kernel API has a concept of a default context associated with
each PCI device under the virtual PHB. The Mellanox CX4 will also use
the cxl kernel API, but it does not use a virtual PHB - rather, the AFU
appears as a physical function as a peer to the networking functions.

In order to allow the kernel API to work with those networking
functions, we will need to associate a default context with them as
well. To this end, refactor the corresponding code to do this in vphb.c
and export it so that it can be called from the PHB code.
Signed-off-by: NIan Munsie <imunsie@au1.ibm.com>
Reviewed-by: NFrederic Barrat <fbarrat@linux.vnet.ibm.com>
Reviewed-by: NAndrew Donnellan <andrew.donnellan@au1.ibm.com>
Signed-off-by: NMichael Ellerman <mpe@ellerman.id.au>

The Mellanox CX4 uses a model where the AFU is one physical function of
the device, and is used by other peer physical functions of the same
device. This will require those other devices to grab a reference on the
AFU when they are initialised to make sure that it does not go away
during their lifetime.

Move the AFU refcount functions to base.c so they can be called from
the PHB code.
Signed-off-by: NIan Munsie <imunsie@au1.ibm.com>
Reviewed-by: NAndrew Donnellan <andrew.donnellan@au1.ibm.com>
Reviewed-by: NFrederic Barrat <fbarrat@linux.vnet.ibm.com>
Signed-off-by: NMichael Ellerman <mpe@ellerman.id.au>

Devices that use CAPP DMA mode (such as the Mellanox CX4) require bus
master to be enabled in order for the CAPI traffic to flow. This should
be harmless to enable for other cxl devices, so unconditionally enable
it in the adapter init flow.
Signed-off-by: NIan Munsie <imunsie@au1.ibm.com>
Reviewed-by: NAndrew Donnellan <andrew.donnellan@au1.ibm.com>
Reviewed-by: NFrederic Barrat <fbarrat@linux.vnet.ibm.com>
Signed-off-by: NMichael Ellerman <mpe@ellerman.id.au>

This extends the check that the adapter is in a CAPI capable slot so
that it may be called by external users in the kernel API. This will be
used by the upcoming Mellanox CX4 support, which needs to know ahead of
time if the card can be switched to cxl mode so that it can leave it in
PCI mode if it is not.

This API takes a parameter to check if CAPP DMA mode is supported, which
it currently only allows on P8NVL systems, since that mode currently has
issues accessing memory < 4GB on P8, and we cannot realistically avoid
that.

This API does not currently check if a CAPP unit is available (i.e. not
already assigned to another PHB) on P8. Doing so would be racy since it
is assigned on a first come first serve basis, and so long as CAPP DMA
mode is not supported on P8 we don't need this, since the only
anticipated user of this API requires CAPP DMA mode.

Cc: Philippe Bergheaud <felix@linux.vnet.ibm.com>
Signed-off-by: NIan Munsie <imunsie@au1.ibm.com>
Reviewed-by: NAndrew Donnellan <andrew.donnellan@au1.ibm.com>
Reviewed-by: NFrederic Barrat <fbarrat@linux.vnet.ibm.com>
Signed-off-by: NMichael Ellerman <mpe@ellerman.id.au>

The support for using the Mellanox CX4 in cxl mode will require
additions to the PHB code. In preparation for this, move the existing
cxl code out of pci-ioda.c into a separate pci-cxl.c file to keep things
more organised.
Signed-off-by: NIan Munsie <imunsie@au1.ibm.com>
Reviewed-by: NAndrew Donnellan <andrew.donnellan@au1.ibm.com>
Reviewed-by: NFrederic Barrat <fbarrat@linux.vnet.ibm.com>
Signed-off-by: NMichael Ellerman <mpe@ellerman.id.au>

Use for_each_compatible_node() macro instead of open coding it.

Generated by Coccinelle.
Signed-off-by: NWei Yongjun <yongjun_wei@trendmicro.com.cn>
Reviewed-by: NAndrew Donnellan <andrew.donnellan@au1.ibm.com>
Acked-by: NIan Munsie <imunsie@au1.ibm.com>
Signed-off-by: NMichael Ellerman <mpe@ellerman.id.au>

PROT_SAO is a powerpc-specific flag to mmap(), and we rely on arch
specific logic to allow it to be passed to mmap().

Add a small test to ensure mmap() accepts PROT_SAO. We don't have a good
way to test that it actually causes the mapping to be created with the
right flags, so for now we just touch the mapping so it's faulted in. In
future we might be able to do something better.
Signed-off-by: NMichael Ellerman <mpe@ellerman.id.au>

Signed-off-by: NMichael Ellerman <mpe@ellerman.id.au>

Signed-off-by: NMichael Ellerman <mpe@ellerman.id.au>

Purely to make it pleasing to the eye.
Signed-off-by: NMichael Ellerman <mpe@ellerman.id.au>

Signed-off-by: NMichael Ellerman <mpe@ellerman.id.au>

None of these are used, or have been since we merged ppc & ppc64.
Signed-off-by: NMichael Ellerman <mpe@ellerman.id.au>

The array crash_shutdown_handles[] has size CRASH_HANDLER_MAX, thus when
we loop over the elements of the list we check crash_shutdown_handles[i]
&& i < CRASH_HANDLER_MAX. However this means that when we increment i to
CRASH_HANDLER_MAX we will perform an out of bound array access checking
the first condition before exiting on the second condition.

To avoid the out of bounds access, simply reorder the loop conditions.

Fixes: 1d145165 ("powerpc: Add array bounds checking to crash_shutdown_handlers")
Signed-off-by: NSuraj Jitindar Singh <sjitindarsingh@gmail.com>
Reviewed-by: NAndrew Donnellan <andrew.donnellan@au1.ibm.com>
Signed-off-by: NMichael Ellerman <mpe@ellerman.id.au>

The subsequent test for RTAS along with the LPAR test are sufficient
Signed-off-by: NBenjamin Herrenschmidt <benh@kernel.crashing.org>
Signed-off-by: NMichael Ellerman <mpe@ellerman.id.au>

The test is unnecessary, the FW_FEATURE_LPAR is sufficient as there
exist no other LPAR type that has RTAS.
Signed-off-by: NBenjamin Herrenschmidt <benh@kernel.crashing.org>
Signed-off-by: NMichael Ellerman <mpe@ellerman.id.au>

Signed-off-by: NBenjamin Herrenschmidt <benh@kernel.crashing.org>
Signed-off-by: NMichael Ellerman <mpe@ellerman.id.au>

Signed-off-by: NBenjamin Herrenschmidt <benh@kernel.crashing.org>
Signed-off-by: NMichael Ellerman <mpe@ellerman.id.au>

ge_imp3a_pic_init() is called way beyond the unflattening of
the tree, it shouldn't be using of_flat_dt_*
Signed-off-by: NBenjamin Herrenschmidt <benh@kernel.crashing.org>
Signed-off-by: NMichael Ellerman <mpe@ellerman.id.au>

Some bit of SPU code was using the FDT rather than the expanded
device-tree. Fix it.
Signed-off-by: NBenjamin Herrenschmidt <benh@kernel.crashing.org>
Signed-off-by: NMichael Ellerman <mpe@ellerman.id.au>

The function is called by both 32-bit and 64-bit early setup right
after early_init_devtree(). All it does is run yet another early
DT parser which is precisely what early_init_devtree() is about,
so move it in there.
Signed-off-by: NBenjamin Herrenschmidt <benh@kernel.crashing.org>
Signed-off-by: NMichael Ellerman <mpe@ellerman.id.au>

Anything in early_setup() needs to be justified to be there, in
this case, we need the trampolines before we can take exceptions
and thus before we turn on the MMU.

Also remove a pretty meaningless and misplaced debug message
Signed-off-by: NBenjamin Herrenschmidt <benh@kernel.crashing.org>
[mpe: Fix comment formatting]
Signed-off-by: NMichael Ellerman <mpe@ellerman.id.au>