Skip to content

K
Kernel

openeuler / Kernel
1 年多 前同步成功

通知 8
Star 0
Fork 0
K
Kernel
切换分支/标签
  1. 02 7月, 2015 2 次提交
    • L
      ACPICA: Tables: Enable both 32-bit and 64-bit FACS · c04e1fb4
      由 Lv Zheng 提交于 
      ACPICA commit f7b86f35416e3d1f71c3d816ff5075ddd33ed486

The following commit is reported to have broken s2ram on some platforms:
 Commit: 0249ed24
 ACPICA: Add option to favor 32-bit FADT addresses.
The platform reports 2 FACS tables (which is not allowed by ACPI
specification) and the new 32-bit address favor rule forces OSPMs to use
the FACS table reported via FADT's X_FIRMWARE_CTRL field.

The root cause of the reported bug might be one of the followings:
1. BIOS may favor the 64-bit firmware waking vector address when the
   version of the FACS is greater than 0 and Linux currently only supports
   resuming from the real mode, so the 64-bit firmware waking vector has
   never been set and might be invalid to BIOS while the commit enables
   higher version FACS.
2. BIOS may favor the FACS reported via the "FIRMWARE_CTRL" field in the
   FADT while the commit doesn't set the firmware waking vector address of
   the FACS reported by "FIRMWARE_CTRL", it only sets the firware waking
   vector address of the FACS reported by "X_FIRMWARE_CTRL".

This patch excludes the cases that can trigger the bugs caused by the root
cause 2.

There is no handshaking mechanism can be used by OSPM to tell BIOS which
FACS is currently used. Thus the FACS reported by "FIRMWARE_CTRL" may still
be used by BIOS and the 0 value of the 32-bit firmware waking vector might
trigger such failure.

This patch tries to favor 32bit FACS address in another way where both the
FACS reported by "FIRMWARE_CTRL" and the FACS reported by "X_FIRMWARE_CTRL"
are loaded so that further commit can set firmware waking vector in the
both tables to ensure we can exclude the cases that trigger the bugs caused
by the root cause 2. The exclusion is split into 2 commits as this commit
is also useful for dumping more ACPI tables, it won't get reverted when
such exclusion is no longer necessary. Lv Zheng.

Link: https://bugzilla.kernel.org/show_bug.cgi?id=74021
Link: https://github.com/acpica/acpica/commit/f7b86f35
Cc: 3.14.1+ <stable@vger.kernel.org> # 3.14.1+
Reported-and-tested-by: NOswald Buddenhagen <ossi@kde.org>
Signed-off-by: NLv Zheng <lv.zheng@intel.com>
Signed-off-by: NBob Moore <robert.moore@intel.com>
Signed-off-by: NRafael J. Wysocki <rafael.j.wysocki@intel.com>
      c04e1fb4
    • L
      ACPICA: Hardware: Enable 64-bit firmware waking vector for selected FACS · aca2a5d3
      由 Lv Zheng 提交于 
      ACPICA commit 7aa598d711644ab0de5f70ad88f1e2de253115e4

The following commit is reported to have broken s2ram on some platforms:
 Commit: 0249ed24
 ACPICA: Add option to favor 32-bit FADT addresses.
The platform reports 2 FACS tables (which is not allowed by ACPI
specification) and the new 32-bit address favor rule forces OSPMs to use
the FACS table reported via FADT's X_FIRMWARE_CTRL field.

The root cause of the reported bug might be one of the followings:
1. BIOS may favor the 64-bit firmware waking vector address when the
   version of the FACS is greater than 0 and Linux currently only supports
   resuming from the real mode, so the 64-bit firmware waking vector has
   never been set and might be invalid to BIOS while the commit enables
   higher version FACS.
2. BIOS may favor the FACS reported via the "FIRMWARE_CTRL" field in the
   FADT while the commit doesn't set the firmware waking vector address of
   the FACS reported by "FIRMWARE_CTRL", it only sets the firware waking
   vector address of the FACS reported by "X_FIRMWARE_CTRL".

This patch excludes the cases that can trigger the bugs caused by the root
cause 1.

ACPI specification says:
A. 32-bit FACS address (FIRMWARE_CTRL field in FADT):
   Physical memory address of the FACS, where OSPM and firmware exchange
   control information.
   If the X_FIRMWARE_CTRL field contains a non zero value then this field
   must be zero.
   A zero value indicates that no FACS is specified by this field.
B. 64-bit FACS address (X_FIRMWARE_CTRL field in FADT):
   64bit physical memory address of the FACS.
   This field is used when the physical address of the FACS is above 4GB.
   If the FIRMWARE_CTRL field contains a non zero value then this field
   must be zero.
   A zero value indicates that no FACS is specified by this field.
Thus the 32bit and 64bit firmware waking vector should indicate completely
different resuming environment - real mode (1MB addressable) and non real
mode (4GB+ addressable) and currently Linux only supports resuming from
real mode.

This patch enables 64-bit firmware waking vector for selected FACS via new
acpi_set_firmware_waking_vectors() API so that it's up to OSPMs to
determine which resuming mode should be used by BIOS and ACPICA changes
won't trigger the bugs caused by the root cause 1. Lv Zheng.

Link: https://bugzilla.kernel.org/show_bug.cgi?id=74021
Link: https://github.com/acpica/acpica/commit/7aa598d7Reported-and-tested-by: NOswald Buddenhagen <ossi@kde.org>
Signed-off-by: NLv Zheng <lv.zheng@intel.com>
Signed-off-by: NBob Moore <robert.moore@intel.com>
Signed-off-by: NRafael J. Wysocki <rafael.j.wysocki@intel.com>
      aca2a5d3
  3. 22 5月, 2015 1 次提交
  5. 14 4月, 2015 2 次提交
  7. 05 2月, 2015 3 次提交
    • L
      ACPICA: Events: Introduce ACPI_GPE_DISPATCH_RAW_HANDLER to fix 2 issues for the current GPE APIs · 0d0988af
      由 Lv Zheng 提交于 
      ACPICA commit 199cad16530a45aea2bec98e528866e20c5927e1

Since whether the GPE should be disabled/enabled/cleared should only be
determined by the GPE driver's state machine:
1. GPE should be disabled if the driver wants to switch to the GPE polling
   mode when a GPE storm condition is indicated and should be enabled if
   the driver wants to switch back to the GPE interrupt mode when all of
   the storm conditions are cleared. The conditions should be protected by
   the driver's specific lock.
2. GPE should be enabled if the driver has accepted more than one request
   and should be disabled if the driver has completed all of the requests.
   The request count should be protected by the driver's specific lock.
3. GPE should be cleared either when the driver is about to handle an edge
   triggered GPE or when the driver has completed to handle a level
   triggered GPE. The handling code should be protected by the driver's
   specific lock.
Thus the GPE enabling/disabling/clearing operations are likely to be
performed with the driver's specific lock held while we currently cannot do
this. This is because:
1. We have the acpi_gbl_gpe_lock held before invoking the GPE driver's
   handler. Driver's specific lock is likely to be held inside of the
   handler, thus we can see some dead lock issues due to the reversed
   locking order or recursive locking. In order to solve such dead lock
   issues, we need to unlock the acpi_gbl_gpe_lock before invoking the
   handler. BZ 1100.
2. Since GPE disabling/enabling/clearing should be determined by the GPE
   driver's state machine, we shouldn't perform such operations inside of
   ACPICA for a GPE handler to mess up the driver's state machine. BZ 1101.

Originally this patch includes a logic to flush GPE handlers, it is dropped
due to the following reasons:
1. This is a different issue;
2. Linux OSL has fixed this by flushing SCI in acpi_os_wait_events_complete().
We will pick up this topic when the Linux OSL fix turns out to be not
sufficient.

Note that currently the internal operations and the acpi_gbl_gpe_lock are
also used by ACPI_GPE_DISPATCH_METHOD and ACPI_GPE_DISPATCH_NOTIFY. In
order not to introduce regressions, we add one
ACPI_GPE_DISPATCH_RAW_HANDLER type to be distiguished from
ACPI_GPE_DISPATCH_HANDLER. For which the acpi_gbl_gpe_lock is unlocked before
invoking the GPE handler and the internal enabling/disabling operations are
bypassed to allow drivers to perform them at a proper position using the
GPE APIs and ACPI_GPE_DISPATCH_RAW_HANDLER users should invoke acpi_set_gpe()
instead of acpi_enable_gpe()/acpi_disable_gpe() to bypass the internal GPE
clearing code in acpi_enable_gpe(). Lv Zheng.

Known issues:
1. Edge-triggered GPE lost for frequent enablings
   On some buggy silicon platforms, GPE enable line may not be directly
   wired to the GPE trigger line. In that case, when GPE enabling is
   frequently performed for edge-triggered GPEs, GPE status may stay set
   without being triggered.
   This patch may maginify this problem as it allows GPE enabling to be
   parallel performed during the process the GPEs are handled.
   This is an existing issue, because:
   1. For task context:
      Current ACPI_GPE_DISPATCH_METHOD practices have proven that this
      isn't a real issue - we can re-enable edge-triggered GPE in a work
      queue where the GPE status bit might already be set.
   2. For IRQ context:
      This can even happen when the GPE enabling occurs before returning
      from the GPE handler and after unlocking the GPE lock.
   Thus currently no code is included to protect this.

Link: https://github.com/acpica/acpica/commit/199cad16Signed-off-by: NLv Zheng <lv.zheng@intel.com>
Signed-off-by: NBob Moore <robert.moore@intel.com>
Signed-off-by: NRafael J. Wysocki <rafael.j.wysocki@intel.com>
      0d0988af
    • D
      ACPICA: Update version to 20150204 · 121b7d91
      由 David E. Box 提交于 
      ACPICA commit e06b1624b02dc8317d144e9a6fe9d684c5fa2f90

Version 20150204.

Link: https://github.com/acpica/acpica/commit/e06b1624Signed-off-by: NDavid E. Box <david.e.box@linux.intel.com>
Signed-off-by: NBob Moore <robert.moore@intel.com>
Signed-off-by: NLv Zheng <lv.zheng@intel.com>
Signed-off-by: NRafael J. Wysocki <rafael.j.wysocki@intel.com>
      121b7d91
    • D
      ACPICA: Update Copyright headers to 2015 · 82a80941
      由 David E. Box 提交于 
      ACPICA commit 8990e73ab2aa15d6a0068b860ab54feff25bee36

Link: https://github.com/acpica/acpica/commit/8990e73aSigned-off-by: NDavid E. Box <david.e.box@linux.intel.com>
Signed-off-by: NBob Moore <robert.moore@intel.com>
Signed-off-by: NLv Zheng <lv.zheng@intel.com>
Signed-off-by: NRafael J. Wysocki <rafael.j.wysocki@intel.com>
      82a80941
  9. 26 1月, 2015 1 次提交
  11. 28 11月, 2014 1 次提交
  13. 21 10月, 2014 1 次提交
  15. 01 10月, 2014 1 次提交
  17. 03 9月, 2014 1 次提交
  19. 31 7月, 2014 1 次提交
  21. 24 7月, 2014 1 次提交
  23. 20 7月, 2014 1 次提交
  25. 08 7月, 2014 2 次提交
  27. 01 6月, 2014 1 次提交
    • L
      ACPICA: Tables: Add mechanism to control early table checksum verification. · 47d68c7f
      由 Lv Zheng 提交于 
      It is reported that Linux x86 kernel cannot map large tables. The following
large SSDT table on such platform fails to pass checksum verification and
cannot be installed:
 ACPI: SSDT 0x00000000B9638018 07A0C4 (v02 INTEL  S2600CP  00004000 INTL 20100331)

It sounds strange that in the 64-bit virtual memory address space, we
cannot map a single ACPI table to do checksum verification. The root cause
is:
 1. ACPICA doesn't split IO memory mapping and table mapping;
 2. Linux x86 OSL implements acpi_os_map_memory() using a size limited fix-map
    mechanism during early boot stage, which is more suitable for only IO
    mappings.

ACPICA originally only mapped table header for signature validation, and
this header mapping is required by OSL override mechanism. There was no
checksum verification because we could not map the whole table using this
OSL. While the following ACPICA commit enforces checksum verification by
mapping the whole table during Linux boot stage and it finally triggers
this issue on some platforms:
 Commit: 86dfc6f3
 Subject: ACPICA: Tables: Fix table checksums verification before installation.

Before doing further cleanups for the OSL table mapping and override
implementation, this patch introduces an option for such OSPMs to
temporarily discard the checksum verification feature. It then can be
re-enabled easily when the ACPICA and the underlying OSL is ready.

This patch also deletes a comment around the limitation of mappings because
it is not correct. The limitation is not how many times we can map in the
early stage, but the OSL mapping facility may not be suitable for mapping
the ACPI tables and thus may complain us the size limitation.

The acpi_tb_verify_table() is renamed to acpi_tb_verify_temp_table() due to the
work around added, it now only applies to the table descriptor that hasn't
been installed and cannot be used in other cases. Lv Zheng.
Tested-by: NYuanhan Liu <yuanhan.liu@linux.intel.com>
Signed-off-by: NLv Zheng <lv.zheng@intel.com>
Signed-off-by: NRafael J. Wysocki <rafael.j.wysocki@intel.com>
      47d68c7f
  29. 07 5月, 2014 9 次提交
  31. 21 4月, 2014 3 次提交
  33. 26 3月, 2014 2 次提交
  35. 18 3月, 2014 2 次提交
  37. 27 2月, 2014 1 次提交
  39. 11 2月, 2014 2 次提交
  41. 06 2月, 2014 1 次提交
  43. 28 1月, 2014 1 次提交