- 25 2月, 2019 8 次提交
-
-
由 Peng Li 提交于
This patch adds support to config depth for tx|rx ring separately by ethtool command "-G". Signed-off-by: NPeng Li <lipeng321@huawei.com> Signed-off-by: NHuazhong Tan <tanhuazhong@huawei.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Yunsheng Lin 提交于
The hnae3_get_bit uses hnae3_get_field, and hnae3_get_field masks the data, which is unnecessary in data path. Signed-off-by: NYunsheng Lin <linyunsheng@huawei.com> Signed-off-by: NHuazhong Tan <tanhuazhong@huawei.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Yunsheng Lin 提交于
hnae3_set_bit and hnae3_set_field masks the data before setting the field or bit, which is unnecessary because the data is already zero initialized. Suggested-by: NJohn Garry <john.garry@huawei.com> Signed-off-by: NYunsheng Lin <linyunsheng@huawei.com> Signed-off-by: NHuazhong Tan <tanhuazhong@huawei.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Yunsheng Lin 提交于
This patch adds unlikely hint for error handling in critical data path. Signed-off-by: NYunsheng Lin <linyunsheng@huawei.com> Signed-off-by: NHuazhong Tan <tanhuazhong@huawei.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Yunsheng Lin 提交于
The fill_desc ops has only one implementation, and get_rxd_bnum has not been used, so this patch removes them. Signed-off-by: NYunsheng Lin <linyunsheng@huawei.com> Signed-off-by: NHuazhong Tan <tanhuazhong@huawei.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Yunsheng Lin 提交于
This patch limits some variables' scope as much as possible in hns3_fill_desc. Also, only set l3_type and l4_type when necessary. Signed-off-by: NYunsheng Lin <linyunsheng@huawei.com> Signed-off-by: NHuazhong tan <tanhuazhong@huawei.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Yunsheng Lin 提交于
This patch uses shift offset to avoid doing mult and div operation. Signed-off-by: NYunsheng Lin <linyunsheng@huawei.com> Signed-off-by: NHuazhong Tan <tanhuazhong@huawei.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Yunsheng Lin 提交于
This patch adds xps setting support for hns3 driver based on the interrupt affinity info. Signed-off-by: NYunsheng Lin <linyunsheng@huawei.com> Signed-off-by: NHuazhong Tan <tanhuazhong@huawei.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
- 22 2月, 2019 12 次提交
-
-
由 Huazhong Tan 提交于
According to the hardware's description, the driver should clear the command queue's registers when uloading VF driver. Otherwise, these existing value may lead the IMP get into a wrong state. Fixes: fedd0c15 ("net: hns3: Add HNS3 VF IMP(Integrated Management Proc) cmd interface") Signed-off-by: NHuazhong Tan <tanhuazhong@huawei.com> Signed-off-by: NPeng Li <lipeng321@huawei.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Huazhong Tan 提交于
According to the hardware's description, the driver should clear the command queue's registers when uloading driver. Otherwise, these existing value may lead the IMP get into a wrong state. Also this patch adds hclge_cmd_uninit() to do the command queue uninitialization which includes clearing registers and freeing memory. Fixes: 68c0a5c7 ("net: hns3: Add HNS3 IMP(Integrated Mgmt Proc) Cmd Interface Support") Signed-off-by: NHuazhong Tan <tanhuazhong@huawei.com> Signed-off-by: NPeng Li <lipeng321@huawei.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 liuzhongzhu 提交于
Record the vlan tables that the VF sends to the chip. After the VF exception, the PF actively clears the VF to chip config. Signed-off-by: Nliuzhongzhu <liuzhongzhu@huawei.com> Signed-off-by: NPeng Li <lipeng321@huawei.com> Signed-off-by: NHuazhong Tan <tanhuazhong@huawei.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 liuzhongzhu 提交于
Record the unicast and multicast tables that the VF sends to the chip. After the VF exception, the PF actively clears the VF to chip config. Signed-off-by: Nliuzhongzhu <liuzhongzhu@huawei.com> Signed-off-by: NPeng Li <lipeng321@huawei.com> Signed-off-by: NHuazhong Tan <tanhuazhong@huawei.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Weihang Li 提交于
This patch modify print message of 6th bit of ppp mpf abnormal errors, there is a extra letter e in it. Signed-off-by: NWeihang Li <liweihang@hisilicon.com> Signed-off-by: NPeng Li <lipeng321@huawei.com> Signed-off-by: NHuazhong Tan <tanhuazhong@huawei.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Weihang Li 提交于
These bits are enabled now and have been test. Signed-off-by: NWeihang Li <liweihang@hisilicon.com> Signed-off-by: NPeng Li <lipeng321@huawei.com> Signed-off-by: NHuazhong Tan <tanhuazhong@huawei.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Weihang Li 提交于
The 3rd and 4th of PPU(RCB) PF Abnormal is RAS errors instead of MSI-X like other bits. This patch adds process of handling and logging this two bits. Otherwise, this patch modifies print message of 28th and 29th bit of PPU MPF Abnormal errors, which keep same with other errors now. Fixes: f69b10b3 ("net: hns3: handle hw errors of PPU(RCB)") Signed-off-by: NWeihang Li <liweihang@hisilicon.com> Signed-off-by: NPeng Li <lipeng321@huawei.com> Signed-off-by: NHuazhong Tan <tanhuazhong@huawei.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Weihang Li 提交于
This patch add information of specific bit in log to be consistent with other type of errors, so that we can know which memory of ssu has occurred a ecc ras errors. Signed-off-by: NWeihang Li <liweihang@hisilicon.com> Signed-off-by: NPeng Li <lipeng321@huawei.com> Signed-off-by: NHuazhong Tan <tanhuazhong@huawei.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Jian Shen 提交于
In original codes, for copper port which doesn't connect to phy, it always returns -EOPNOTSUPP when query port information. This patch fixes it by return the port information of MAC. Fixes: 5f373b15 ("net: hns3: Fix speed/duplex information loss problem when executing ethtool ethx cmd of VF") Signed-off-by: NJian Shen <shenjian15@huawei.com> Signed-off-by: NPeng Li <lipeng321@huawei.com> Signed-off-by: NHuazhong Tan <tanhuazhong@huawei.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Jian Shen 提交于
The link mode with bits has been up to more than 31 for some MAC and phy. Convert to using a linkmode bitmap, which can support all link modes. Signed-off-by: NJian Shen <shenjian15@huawei.com> Signed-off-by: NPeng Li <lipeng321@huawei.com> Signed-off-by: NHuazhong Tan <tanhuazhong@huawei.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Yonglong Liu 提交于
In hnae3_register_ae_dev(), ae_algo->ops is assigned to ae_dev->ops before check that ae_algo->ops is valid. And in hnae3_register_ae_algo(), missing check for ae_algo->ops. This patch fixes them. Signed-off-by: NYonglong Liu <liuyonglong@huawei.com> Signed-off-by: NPeng Li <lipeng321@huawei.com> Signed-off-by: NHuazhong Tan <tanhuazhong@huawei.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Yonglong Liu 提交于
These functions are exported, add pointer checking at the beginning can make them more safe. Signed-off-by: NYonglong Liu <liuyonglong@huawei.com> Signed-off-by: NPeng Li <lipeng321@huawei.com> Signed-off-by: NHuazhong Tan <tanhuazhong@huawei.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
- 19 2月, 2019 1 次提交
-
-
由 Salil Mehta 提交于
This patch fixes the missing device reference release-after-use in the positive leg of the roce reset API of the HNS DSAF. Fixes: c969c6e7 ("net: hns: Fix object reference leaks in hns_dsaf_roce_reset()") Reported-by: NJohn Garry <john.garry@huawei.com> Signed-off-by: NSalil Mehta <salil.mehta@huawei.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
- 18 2月, 2019 1 次提交
-
-
由 Wei Yongjun 提交于
Fixes the following sparse warning: drivers/net/ethernet/hisilicon/hns3/hns3pf/hclge_main.c:2431:5: warning: symbol 'hclge_set_all_vf_rst' was not declared. Should it be static? Fixes: aa5c4f17 ("net: hns3: add reset handling for VF when doing PF reset") Signed-off-by: NWei Yongjun <weiyongjun1@huawei.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
- 15 2月, 2019 1 次提交
-
-
由 Huang Zijiang 提交于
The of_find_device_by_node() takes a reference to the underlying device structure, we should release that reference. Signed-off-by: NHuang Zijiang <huang.zijiang@zte.com.cn> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
- 03 2月, 2019 12 次提交
-
-
由 liuzhongzhu 提交于
When updating the available MAC VLAN table counts, MAC VLAN table entry count function adds operation 0 value protection measures. Signed-off-by: Nliuzhongzhu <liuzhongzhu@huawei.com> Signed-off-by: NPeng Li <lipeng321@huawei.com> Signed-off-by: NHuazhong Tan <tanhuazhong@huawei.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 liuzhongzhu 提交于
In order to prevent the variable anomaly from being larger than desc_num, the upper limit judgment condition becomes >=. Signed-off-by: Nliuzhongzhu <liuzhongzhu@huawei.com> Signed-off-by: NPeng Li <lipeng321@huawei.com> Signed-off-by: NHuazhong Tan <tanhuazhong@huawei.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Jian Shen 提交于
When user disables vlan filter, and adds vlan device, it won't notify the driver the update the vlan filter. In this case, when user enables vlan filter again, the packets with new vlan tag will be filtered by vlan filter. Signed-off-by: NJian Shen <shenjian15@huawei.com> Signed-off-by: NPeng Li <lipeng321@huawei.com> Signed-off-by: NHuazhong Tan <tanhuazhong@huawei.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 liuzhongzhu 提交于
Multiple macros with the largest number of TCs in the system, optimized to HCLGE_MAX_TC_NUM. Signed-off-by: Nliuzhongzhu <liuzhongzhu@huawei.com> Signed-off-by: NPeng Li <lipeng321@huawei.com> Signed-off-by: NHuazhong Tan <tanhuazhong@huawei.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 liuzhongzhu 提交于
Run ethtool ethx when displaying device information in VF, the supported port and link mode items will be empty. This patch fixes it. Fixes: e2cb1dec ("net: hns3: Add HNS3 VF HCL(Hardware Compatibility Layer) Support") Signed-off-by: Nliuzhongzhu <liuzhongzhu@huawei.com> Signed-off-by: NPeng Li <lipeng321@huawei.com> Signed-off-by: NHuazhong Tan <tanhuazhong@huawei.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Huazhong Tan 提交于
Only the TC is enabled, we need to check whether the buffer is enough, otherwise it may lead to a wrong -ENOMEM case. Fixes: 9ffe79a9 ("net: hns3: Support for dynamically assigning tx buffer to TC") Signed-off-by: NHuazhong Tan <tanhuazhong@huawei.com> Signed-off-by: NPeng Li <lipeng321@huawei.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Weihang Li 提交于
This patch does not change the code logic. There are some same set_bit statements called by add/rm_uc/mc_addr_common, and move this statements into hclge_prepare_mac_addr to reduce duplicate code. Signed-off-by: NWeihang Li <liweihang@hisilicon.com> Signed-off-by: NPeng Li <lipeng321@huawei.com> Signed-off-by: NHuazhong Tan <tanhuazhong@huawei.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Weihang Li 提交于
For simplifying the code, this patch adds hclge_cmd_check_retval() to check the return value of the command. Also, according the IMP's description, when there are several descriptors in a command, then the IMP will save the return value on the last description, so hclge_cmd_check_retval() just check the last one for this case. Signed-off-by: NWeihang Li <liweihang@hisilicon.com> Signed-off-by: NPeng Li <lipeng321@huawei.com> Signed-off-by: NHuazhong Tan <tanhuazhong@huawei.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Yunsheng Lin 提交于
There are four steps to calcuate the rx private buffer, each step can be done in a function to avoid code duplication and aid code readability. This patch adds three separate functions do the job. Also, the function name more or less make the comment redundant, so remove some obvious comment. Signed-off-by: NYunsheng Lin <linyunsheng@huawei.com> Signed-off-by: NPeng Li <lipeng321@huawei.com> Signed-off-by: NHuazhong Tan <tanhuazhong@huawei.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Yonglong Liu 提交于
The second parameter to the hook function set_gro_en is always passed in true/false, so modify it's type from int to bool. Signed-off-by: NYonglong Liu <liuyonglong@huawei.com> Signed-off-by: NPeng Li <lipeng321@huawei.com> Signed-off-by: NHuazhong Tan <tanhuazhong@huawei.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Peng Li 提交于
HNS3 supports setting rx-usecs|tx-usecs as 0, but it will not update dynamically when adaptive-tx or adaptive-rx is enable. This patch removes the Redundant check. Fixes: a95e1f86 ("net: hns3: change the time interval of int_gl calculating") Signed-off-by: NPeng Li <lipeng321@huawei.com> Signed-off-by: NHuazhong Tan <tanhuazhong@huawei.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Peng Li 提交于
Use the same code style for rx_group and tx_group in the hns3_update_new_int_gl(). Signed-off-by: NPeng Li <lipeng321@huawei.com> Signed-off-by: NHuazhong Tan <tanhuazhong@huawei.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
- 02 2月, 2019 1 次提交
-
-
由 Dan Carpenter 提交于
We should return -ENOMEM if the kcalloc() fails. Fixes: d174ea75 ("net: hns3: add statistics for PFC frames and MAC control frame") Signed-off-by: NDan Carpenter <dan.carpenter@oracle.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
- 31 1月, 2019 4 次提交
-
-
由 Jian Shen 提交于
In orginal codes, driver always enables flow director when intializing. When user disable flow director with command ethtool -K, the flow director will be enabled again after resetting. This patch fixes it by only enabling it when first initialzing. Fixes: 6871af29 ("net: hns3: Add reset handle for flow director") Signed-off-by: NJian Shen <shenjian15@huawei.com> Signed-off-by: NPeng Li <lipeng321@huawei.com> Signed-off-by: NHuazhong Tan <tanhuazhong@huawei.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Jian Shen 提交于
When VF is resetting, it can't communicate to PF with mailbox msg. This patch adds reset state checking before sending keep alive msg to PF. Fixes: a6d818e3 ("net: hns3: Add vport alive state checking support") Signed-off-by: NJian Shen <shenjian15@huawei.com> Signed-off-by: NPeng Li <lipeng321@huawei.com> Signed-off-by: NHuazhong Tan <tanhuazhong@huawei.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Peng Li 提交于
HNS3 VF driver support NIC and Roce, hdev stores NIC handle and Roce handle, should use correct parameter for container_of. Signed-off-by: NPeng Li <lipeng321@huawei.com> Signed-off-by: NHuazhong Tan <tanhuazhong@huawei.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Huazhong Tan 提交于
While hclge_init_umv_space() failed in the hclge_init_ae_dev(), we should undo all the operation which has been done successfully, the last success operation maybe hclge_mac_mdio_config(), so if hclge_init_umv_space() failed, we also need to undo it. Fixes: 288475b2ad01 ("{topost} net: hns3: refine umv space allocation") Signed-off-by: NHuazhong Tan <tanhuazhong@huawei.com> Signed-off-by: NPeng Li <lipeng321@huawei.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-