Skip to content

K
Kernel

openeuler / Kernel
1 年多 前同步成功

通知 8
Star 0
Fork 0
K
Kernel
切换分支/标签
  1. 20 3月, 2014 2 次提交
  3. 14 3月, 2014 1 次提交
  5. 13 3月, 2014 1 次提交
  7. 12 3月, 2014 3 次提交
    • A
      x86: bpf_jit: support negative offsets · fdfaf64e
      由 Alexei Starovoitov 提交于 
      Commit a998d434 claimed to introduce negative offset support to x86 jit,
but it couldn't be working, since at the time of the execution
of LD+ABS or LD+IND instructions via call into
bpf_internal_load_pointer_neg_helper() the %edx (3rd argument of this func)
had junk value instead of access size in bytes (1 or 2 or 4).

Store size into %edx instead of %ecx (what original commit intended to do)

Fixes: a998d434 ("bpf jit: Let the x86 jit handle negative offsets")
Signed-off-by: NAlexei Starovoitov <ast@plumgrid.com>
Cc: Jan Seiffert <kaffeemonster@googlemail.com>
Cc: Eric Dumazet <edumazet@google.com>
Acked-by: NEric Dumazet <edumazet@google.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>
      fdfaf64e
    • S
      x86, fpu: Check tsk_used_math() in kernel_fpu_end() for eager FPU · 731bd6a9
      由 Suresh Siddha 提交于 
      For non-eager fpu mode, thread's fpu state is allocated during the first
fpu usage (in the context of device not available exception). This
(math_state_restore()) can be a blocking call and hence we enable
interrupts (which were originally disabled when the exception happened),
allocate memory and disable interrupts etc.

But the eager-fpu mode, call's the same math_state_restore() from
kernel_fpu_end(). The assumption being that tsk_used_math() is always
set for the eager-fpu mode and thus avoid the code path of enabling
interrupts, allocating fpu state using blocking call and disable
interrupts etc.

But the below issue was noticed by Maarten Baert, Nate Eldredge and
few others:

If a user process dumps core on an ecrypt fs while aesni-intel is loaded,
we get a BUG() in __find_get_block() complaining that it was called with
interrupts disabled; then all further accesses to our ecrypt fs hang
and we have to reboot.

The aesni-intel code (encrypting the core file that we are writing) needs
the FPU and quite properly wraps its code in kernel_fpu_{begin,end}(),
the latter of which calls math_state_restore(). So after kernel_fpu_end(),
interrupts may be disabled, which nobody seems to expect, and they stay
that way until we eventually get to __find_get_block() which barfs.

For eager fpu, most the time, tsk_used_math() is true. At few instances
during thread exit, signal return handling etc, tsk_used_math() might
be false.

In kernel_fpu_end(), for eager-fpu, call math_state_restore()
only if tsk_used_math() is set. Otherwise, don't bother. Kernel code
path which cleared tsk_used_math() knows what needs to be done
with the fpu state.
Reported-by: NMaarten Baert <maarten-baert@hotmail.com>
Reported-by: NNate Eldredge <nate@thatsmathematics.com>
Suggested-by: NLinus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: NSuresh Siddha <sbsiddha@gmail.com>
Link: http://lkml.kernel.org/r/1391410583.3801.6.camel@europa
Cc: George Spelvin <linux@horizon.com>
Signed-off-by: NH. Peter Anvin <hpa@linux.intel.com>
      731bd6a9
    • D
      x86: Remove CONFIG_X86_OOSTORE · 09df7c4c
      由 Dave Jones 提交于 
      This was an optimization that made memcpy type benchmarks a little
faster on ancient (Circa 1998) IDT Winchip CPUs.  In real-life
workloads, it wasn't even noticable, and I doubt anyone is running
benchmarks on 16 year old silicon any more.

Given this code has likely seen very little use over the last decade,
let's just remove it.
Signed-off-by: NDave Jones <davej@fedoraproject.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
      09df7c4c
  9. 11 3月, 2014 1 次提交
  11. 08 3月, 2014 2 次提交
    • L
      x86: fix compile error due to X86_TRAP_NMI use in asm files · b01d4e68
      由 Linus Torvalds 提交于 
      It's an enum, not a #define, you can't use it in asm files.

Introduced in commit 5fa10196 ("x86: Ignore NMIs that come in during
early boot"), and sadly I didn't compile-test things like I should have
before pushing out.

My weak excuse is that the x86 tree generally doesn't introduce stupid
things like this (and the ARM pull afterwards doesn't cause me to do a
compile-test either, since I don't cross-compile).

Cc: Don Zickus <dzickus@redhat.com>
Cc: H. Peter Anvin <hpa@linux.intel.com>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
      b01d4e68
    • H
      x86: Ignore NMIs that come in during early boot · 5fa10196
      由 H. Peter Anvin 提交于 
      Don Zickus reports:

A customer generated an external NMI using their iLO to test kdump
worked.  Unfortunately, the machine hung.  Disabling the nmi_watchdog
made things work.

I speculated the external NMI fired, caused the machine to panic (as
expected) and the perf NMI from the watchdog came in and was latched.
My guess was this somehow caused the hang.

   ----

It appears that the latched NMI stays latched until the early page
table generation on 64 bits, which causes exceptions to happen which
end in IRET, which re-enable NMI.  Therefore, ignore NMIs that come in
during early execution, until we have proper exception handling.
Reported-and-tested-by: NDon Zickus <dzickus@redhat.com>
Link: http://lkml.kernel.org/r/1394221143-29713-1-git-send-email-dzickus@redhat.comSigned-off-by: NH. Peter Anvin <hpa@linux.intel.com>
Cc: <stable@vger.kernel.org> # v3.5+, older with some backport effort
      5fa10196
  13. 07 3月, 2014 1 次提交
  15. 05 3月, 2014 2 次提交
  17. 28 2月, 2014 2 次提交
    • P
      kvm, vmx: Really fix lazy FPU on nested guest · 1b385cbd
      由 Paolo Bonzini 提交于 
      Commit e504c909 (kvm, vmx: Fix lazy FPU on nested guest, 2013-11-13)
highlighted a real problem, but the fix was subtly wrong.

nested_read_cr0 is the CR0 as read by L2, but here we want to look at
the CR0 value reflecting L1's setup.  In other words, L2 might think
that TS=0 (so nested_read_cr0 has the bit clear); but if L1 is actually
running it with TS=1, we should inject the fault into L1.

The effective value of CR0 in L2 is contained in vmcs12->guest_cr0, use
it.

Fixes: e504c909Reported-by: NKashyap Chamarty <kchamart@redhat.com>
Reported-by: NStefan Bader <stefan.bader@canonical.com>
Tested-by: NKashyap Chamarty <kchamart@redhat.com>
Tested-by: NAnthoine Bourgeois <bourgeois@bertin.fr>
Cc: stable@vger.kernel.org
Signed-off-by: NPaolo Bonzini <pbonzini@redhat.com>
      1b385cbd
    • A
      kvm: x86: fix emulator buffer overflow (CVE-2014-0049) · a08d3b3b
      由 Andrew Honig 提交于 
      The problem occurs when the guest performs a pusha with the stack
address pointing to an mmio address (or an invalid guest physical
address) to start with, but then extending into an ordinary guest
physical address.  When doing repeated emulated pushes
emulator_read_write sets mmio_needed to 1 on the first one.  On a
later push when the stack points to regular memory,
mmio_nr_fragments is set to 0, but mmio_is_needed is not set to 0.

As a result, KVM exits to userspace, and then returns to
complete_emulated_mmio.  In complete_emulated_mmio
vcpu->mmio_cur_fragment is incremented.  The termination condition of
vcpu->mmio_cur_fragment == vcpu->mmio_nr_fragments is never achieved.
The code bounces back and fourth to userspace incrementing
mmio_cur_fragment past it's buffer.  If the guest does nothing else it
eventually leads to a a crash on a memcpy from invalid memory address.

However if a guest code can cause the vm to be destroyed in another
vcpu with excellent timing, then kvm_clear_async_pf_completion_queue
can be used by the guest to control the data that's pointed to by the
call to cancel_work_item, which can be used to gain execution.

Fixes: f78146b0Signed-off-by: NAndrew Honig <ahonig@google.com>
Cc: stable@vger.kernel.org (3.5+)
Signed-off-by: NPaolo Bonzini <pbonzini@redhat.com>
      a08d3b3b
  19. 27 2月, 2014 2 次提交
    • P
      perf/x86: Fix event scheduling · 26e61e89
      由 Peter Zijlstra 提交于 
      Vince "Super Tester" Weaver reported a new round of syscall fuzzing (Trinity) failures,
with perf WARN_ON()s triggering. He also provided traces of the failures.

This is I think the relevant bit:

	>    pec_1076_warn-2804  [000] d...   147.926153: x86_pmu_disable: x86_pmu_disable
	>    pec_1076_warn-2804  [000] d...   147.926153: x86_pmu_state: Events: {
	>    pec_1076_warn-2804  [000] d...   147.926156: x86_pmu_state:   0: state: .R config: ffffffffffffffff (          (null))
	>    pec_1076_warn-2804  [000] d...   147.926158: x86_pmu_state:   33: state: AR config: 0 (ffff88011ac99800)
	>    pec_1076_warn-2804  [000] d...   147.926159: x86_pmu_state: }
	>    pec_1076_warn-2804  [000] d...   147.926160: x86_pmu_state: n_events: 1, n_added: 0, n_txn: 1
	>    pec_1076_warn-2804  [000] d...   147.926161: x86_pmu_state: Assignment: {
	>    pec_1076_warn-2804  [000] d...   147.926162: x86_pmu_state:   0->33 tag: 1 config: 0 (ffff88011ac99800)
	>    pec_1076_warn-2804  [000] d...   147.926163: x86_pmu_state: }
	>    pec_1076_warn-2804  [000] d...   147.926166: collect_events: Adding event: 1 (ffff880119ec8800)

So we add the insn:p event (fd[23]).

At this point we should have:

  n_events = 2, n_added = 1, n_txn = 1

	>    pec_1076_warn-2804  [000] d...   147.926170: collect_events: Adding event: 0 (ffff8800c9e01800)
	>    pec_1076_warn-2804  [000] d...   147.926172: collect_events: Adding event: 4 (ffff8800cbab2c00)

We try and add the {BP,cycles,br_insn} group (fd[3], fd[4], fd[15]).
These events are 0:cycles and 4:br_insn, the BP event isn't x86_pmu so
that's not visible.

	group_sched_in()
	  pmu->start_txn() /* nop - BP pmu */
	  event_sched_in()
	     event->pmu->add()

So here we should end up with:

  0: n_events = 3, n_added = 2, n_txn = 2
  4: n_events = 4, n_added = 3, n_txn = 3

But seeing the below state on x86_pmu_enable(), the must have failed,
because the 0 and 4 events aren't there anymore.

Looking at group_sched_in(), since the BP is the leader, its
event_sched_in() must have succeeded, for otherwise we would not have
seen the sibling adds.

But since neither 0 or 4 are in the below state; their event_sched_in()
must have failed; but I don't see why, the complete state: 0,0,1:p,4
fits perfectly fine on a core2.

However, since we try and schedule 4 it means the 0 event must have
succeeded!  Therefore the 4 event must have failed, its failure will
have put group_sched_in() into the fail path, which will call:

	event_sched_out()
	  event->pmu->del()

on 0 and the BP event.

Now x86_pmu_del() will reduce n_events; but it will not reduce n_added;
giving what we see below:

 n_event = 2, n_added = 2, n_txn = 2

	>    pec_1076_warn-2804  [000] d...   147.926177: x86_pmu_enable: x86_pmu_enable
	>    pec_1076_warn-2804  [000] d...   147.926177: x86_pmu_state: Events: {
	>    pec_1076_warn-2804  [000] d...   147.926179: x86_pmu_state:   0: state: .R config: ffffffffffffffff (          (null))
	>    pec_1076_warn-2804  [000] d...   147.926181: x86_pmu_state:   33: state: AR config: 0 (ffff88011ac99800)
	>    pec_1076_warn-2804  [000] d...   147.926182: x86_pmu_state: }
	>    pec_1076_warn-2804  [000] d...   147.926184: x86_pmu_state: n_events: 2, n_added: 2, n_txn: 2
	>    pec_1076_warn-2804  [000] d...   147.926184: x86_pmu_state: Assignment: {
	>    pec_1076_warn-2804  [000] d...   147.926186: x86_pmu_state:   0->33 tag: 1 config: 0 (ffff88011ac99800)
	>    pec_1076_warn-2804  [000] d...   147.926188: x86_pmu_state:   1->0 tag: 1 config: 1 (ffff880119ec8800)
	>    pec_1076_warn-2804  [000] d...   147.926188: x86_pmu_state: }
	>    pec_1076_warn-2804  [000] d...   147.926190: x86_pmu_enable: S0: hwc->idx: 33, hwc->last_cpu: 0, hwc->last_tag: 1 hwc->state: 0

So the problem is that x86_pmu_del(), when called from a
group_sched_in() that fails (for whatever reason), and without x86_pmu
TXN support (because the leader is !x86_pmu), will corrupt the n_added
state.
Reported-and-Tested-by: NVince Weaver <vincent.weaver@maine.edu>
Signed-off-by: NPeter Zijlstra <peterz@infradead.org>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Steven Rostedt <rostedt@goodmis.org>
Cc: Stephane Eranian <eranian@google.com>
Cc: Dave Jones <davej@redhat.com>
Cc: <stable@vger.kernel.org>
Link: http://lkml.kernel.org/r/20140221150312.GF3104@twins.programming.kicks-ass.netSigned-off-by: NIngo Molnar <mingo@kernel.org>
      26e61e89
    • M
      KVM: MMU: drop read-only large sptes when creating lower level sptes · 404381c5
      由 Marcelo Tosatti 提交于 
      Read-only large sptes can be created due to read-only faults as
follows:

- QEMU pagetable entry that maps guest memory is read-only
due to COW.
- Guest read faults such memory, COW is not broken, because
it is a read-only fault.
- Enable dirty logging, large spte not nuked because it is read-only.
- Write-fault on such memory causes guest to loop endlessly
(which must go down to level 1 because dirty logging is enabled).

Fix by dropping large spte when necessary.
Signed-off-by: NMarcelo Tosatti <mtosatti@redhat.com>
Signed-off-by: NPaolo Bonzini <pbonzini@redhat.com>
      404381c5
  21. 26 2月, 2014 2 次提交
  23. 22 2月, 2014 3 次提交
  25. 20 2月, 2014 2 次提交
    • M
      x86: tsc: Add missing Baytrail frequency to the table · 3e11e818
      由 Mika Westerberg 提交于 
      Intel Baytrail is based on Silvermont core so MSR_FSB_FREQ[2:0] == 0 means
that the CPU reference clock runs at 83.3MHz. Add this missing frequency to
the table.
Signed-off-by: NMika Westerberg <mika.westerberg@linux.intel.com>
Cc: Bin Gao <bin.gao@linux.intel.com>
Cc: One Thousand Gnomes <gnomes@lxorguk.ukuu.org.uk>
Cc: Ingo Molnar <mingo@kernel.org>
Cc: H. Peter Anvin <hpa@zytor.com>
Link: http://lkml.kernel.org/r/1392810750-18660-2-git-send-email-mika.westerberg@linux.intel.comSigned-off-by: NThomas Gleixner <tglx@linutronix.de>
      3e11e818
    • T
      x86, tsc: Fallback to normal calibration if fast MSR calibration fails · 5f0e0309
      由 Thomas Gleixner 提交于 
      If we cannot calibrate TSC via MSR based calibration
try_msr_calibrate_tsc() stores zero to fast_calibrate and returns that
to the caller. This value gets then propagated further to clockevents
code resulting division by zero oops like the one below:

 divide error: 0000 [#1] PREEMPT SMP
 Modules linked in:
 CPU: 0 PID: 1 Comm: swapper/0 Tainted: G        W    3.13.0+ #47
 task: ffff880075508000 ti: ffff880075506000 task.ti: ffff880075506000
 RIP: 0010:[<ffffffff810aec14>]  [<ffffffff810aec14>] clockevents_config.part.3+0x24/0xa0
 RSP: 0000:ffff880075507e58  EFLAGS: 00010246
 RAX: ffffffffffffffff RBX: ffff880079c0cd80 RCX: 0000000000000000
 RDX: 0000000000000000 RSI: 0000000000000000 RDI: ffffffffffffffff
 RBP: ffff880075507e70 R08: 0000000000000001 R09: 00000000000000be
 R10: 00000000000000bd R11: 0000000000000003 R12: 000000000000b008
 R13: 0000000000000008 R14: 000000000000b010 R15: 0000000000000000
 FS:  0000000000000000(0000) GS:ffff880079c00000(0000) knlGS:0000000000000000
 CS:  0010 DS: 0000 ES: 0000 CR0: 000000008005003b
 CR2: ffff880079fff000 CR3: 0000000001c0b000 CR4: 00000000001006f0
 Stack:
  ffff880079c0cd80 000000000000b008 0000000000000008 ffff880075507e88
  ffffffff810aecb0 ffff880079c0cd80 ffff880075507e98 ffffffff81030168
  ffff880075507ed8 ffffffff81d1104f 00000000000000c3 0000000000000000
 Call Trace:
  [<ffffffff810aecb0>] clockevents_config_and_register+0x20/0x30
  [<ffffffff81030168>] setup_APIC_timer+0xc8/0xd0
  [<ffffffff81d1104f>] setup_boot_APIC_clock+0x4cc/0x4d8
  [<ffffffff81d0f5de>] native_smp_prepare_cpus+0x3dd/0x3f0
  [<ffffffff81d02ee9>] kernel_init_freeable+0xc3/0x205
  [<ffffffff8177c910>] ? rest_init+0x90/0x90
  [<ffffffff8177c91e>] kernel_init+0xe/0x120
  [<ffffffff8178deec>] ret_from_fork+0x7c/0xb0
  [<ffffffff8177c910>] ? rest_init+0x90/0x90

Prevent this from happening by:
 1) Modifying try_msr_calibrate_tsc() to return calibration value or zero
    if it fails.
 2) Check this return value in native_calibrate_tsc() and in case of zero
    fallback to use normal non-MSR based calibration.

[mw: Added subject and changelog]
Reported-and-tested-by: NMika Westerberg <mika.westerberg@linux.intel.com>
Signed-off-by: NThomas Gleixner <tglx@linutronix.de>
Cc: Bin Gao <bin.gao@linux.intel.com>
Cc: One Thousand Gnomes <gnomes@lxorguk.ukuu.org.uk>
Cc: Ingo Molnar <mingo@kernel.org>
Cc: H. Peter Anvin <hpa@zytor.com>
Link: http://lkml.kernel.org/r/1392810750-18660-1-git-send-email-mika.westerberg@linux.intel.comSigned-off-by: NMika Westerberg <mika.westerberg@linux.intel.com>
Signed-off-by: NThomas Gleixner <tglx@linutronix.de>
      5f0e0309
  27. 14 2月, 2014 3 次提交
  29. 13 2月, 2014 1 次提交
  31. 12 2月, 2014 1 次提交
    • S
      ftrace/x86: Use breakpoints for converting function graph caller · 87fbb2ac
      由 Steven Rostedt (Red Hat) 提交于 
      When the conversion was made to remove stop machine and use the breakpoint
logic instead, the modification of the function graph caller is still
done directly as though it was being done under stop machine.

As it is not converted via stop machine anymore, there is a possibility
that the code could be layed across cache lines and if another CPU is
accessing that function graph call when it is being updated, it could
cause a General Protection Fault.

Convert the update of the function graph caller to use the breakpoint
method as well.

Cc: H. Peter Anvin <hpa@zytor.com>
Cc: stable@vger.kernel.org # 3.5+
Fixes: 08d636b6 "ftrace/x86: Have arch x86_64 use breakpoints instead of stop machine"
Signed-off-by: NSteven Rostedt <rostedt@goodmis.org>
      87fbb2ac
  33. 11 2月, 2014 2 次提交
    • M
      x86: dma-mapping: fix GFP_ATOMIC macro usage · c091c71a
      由 Marek Szyprowski 提交于 
      GFP_ATOMIC is not a single gfp flag, but a macro which expands to the other
flags, where meaningful is the LACK of __GFP_WAIT flag. To check if caller
wants to perform an atomic allocation, the code must test for a lack of the
__GFP_WAIT flag. This patch fixes the issue introduced in v3.5-rc1.

CC: stable@vger.kernel.org
Signed-off-by: NMarek Szyprowski <m.szyprowski@samsung.com>
      c091c71a
    • M
      xen: properly account for _PAGE_NUMA during xen pte translations · a9c8e4be
      由 Mel Gorman 提交于 
      Steven Noonan forwarded a users report where they had a problem starting
vsftpd on a Xen paravirtualized guest, with this in dmesg:

  BUG: Bad page map in process vsftpd  pte:8000000493b88165 pmd:e9cc01067
  page:ffffea00124ee200 count:0 mapcount:-1 mapping:     (null) index:0x0
  page flags: 0x2ffc0000000014(referenced|dirty)
  addr:00007f97eea74000 vm_flags:00100071 anon_vma:ffff880e98f80380 mapping:          (null) index:7f97eea74
  CPU: 4 PID: 587 Comm: vsftpd Not tainted 3.12.7-1-ec2 #1
  Call Trace:
    dump_stack+0x45/0x56
    print_bad_pte+0x22e/0x250
    unmap_single_vma+0x583/0x890
    unmap_vmas+0x65/0x90
    exit_mmap+0xc5/0x170
    mmput+0x65/0x100
    do_exit+0x393/0x9e0
    do_group_exit+0xcc/0x140
    SyS_exit_group+0x14/0x20
    system_call_fastpath+0x1a/0x1f
  Disabling lock debugging due to kernel taint
  BUG: Bad rss-counter state mm:ffff880e9ca60580 idx:0 val:-1
  BUG: Bad rss-counter state mm:ffff880e9ca60580 idx:1 val:1

The issue could not be reproduced under an HVM instance with the same
kernel, so it appears to be exclusive to paravirtual Xen guests.  He
bisected the problem to commit 1667918b ("mm: numa: clear numa
hinting information on mprotect") that was also included in 3.12-stable.

The problem was related to how xen translates ptes because it was not
accounting for the _PAGE_NUMA bit.  This patch splits pte_present to add
a pteval_present helper for use by xen so both bare metal and xen use
the same code when checking if a PTE is present.

[mgorman@suse.de: wrote changelog, proposed minor modifications]
[akpm@linux-foundation.org: fix typo in comment]
Reported-by: NSteven Noonan <steven@uplinklabs.net>
Tested-by: NSteven Noonan <steven@uplinklabs.net>
Signed-off-by: NElena Ufimtseva <ufimtseva@gmail.com>
Signed-off-by: NMel Gorman <mgorman@suse.de>
Reviewed-by: NDavid Vrabel <david.vrabel@citrix.com>
Acked-by: NKonrad Rzeszutek Wilk <konrad.wilk@oracle.com>
Cc: <stable@vger.kernel.org>	[3.12+]
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
      a9c8e4be
  35. 09 2月, 2014 3 次提交
  37. 07 2月, 2014 3 次提交
  39. 06 2月, 2014 2 次提交
    • M
      x86/efi: Allow mapping BGRT on x86-32 · 081cd62a
      由 Matt Fleming 提交于 
      CONFIG_X86_32 doesn't map the boot services regions into the EFI memory
map (see commit 70087011 ("x86, efi: Don't map Boot Services on
i386")), and so efi_lookup_mapped_addr() will fail to return a valid
address. Executing the ioremap() path in efi_bgrt_init() causes the
following warning on x86-32 because we're trying to ioremap() RAM,

 WARNING: CPU: 0 PID: 0 at arch/x86/mm/ioremap.c:102 __ioremap_caller+0x2ad/0x2c0()
 Modules linked in:
 CPU: 0 PID: 0 Comm: swapper/0 Not tainted 3.13.0-0.rc5.git0.1.2.fc21.i686 #1
 Hardware name: DellInc. Venue 8 Pro 5830/09RP78, BIOS A02 10/17/2013
  00000000 00000000 c0c0df08 c09a5196 00000000 c0c0df38 c0448c1e c0b41310
  00000000 00000000 c0b37bc1 00000066 c043bbfd c043bbfd 00e7dfe0 00073eff
  00073eff c0c0df48 c0448ce2 00000009 00000000 c0c0df9c c043bbfd 00078d88
 Call Trace:
  [<c09a5196>] dump_stack+0x41/0x52
  [<c0448c1e>] warn_slowpath_common+0x7e/0xa0
  [<c043bbfd>] ? __ioremap_caller+0x2ad/0x2c0
  [<c043bbfd>] ? __ioremap_caller+0x2ad/0x2c0
  [<c0448ce2>] warn_slowpath_null+0x22/0x30
  [<c043bbfd>] __ioremap_caller+0x2ad/0x2c0
  [<c0718f92>] ? acpi_tb_verify_table+0x1c/0x43
  [<c0719c78>] ? acpi_get_table_with_size+0x63/0xb5
  [<c087cd5e>] ? efi_lookup_mapped_addr+0xe/0xf0
  [<c043bc2b>] ioremap_nocache+0x1b/0x20
  [<c0cb01c8>] ? efi_bgrt_init+0x83/0x10c
  [<c0cb01c8>] efi_bgrt_init+0x83/0x10c
  [<c0cafd82>] efi_late_init+0x8/0xa
  [<c0c9bab2>] start_kernel+0x3ae/0x3c3
  [<c0c9b53b>] ? repair_env_string+0x51/0x51
  [<c0c9b378>] i386_start_kernel+0x12e/0x131

Switch to using early_memremap(), which won't trigger this warning, and
has the added benefit of more accurately conveying what we're trying to
do - map a chunk of memory.

This patch addresses the following bug report,

  https://bugzilla.kernel.org/show_bug.cgi?id=67911Reported-by: NAdam Williamson <awilliam@redhat.com>
Cc: Josh Triplett <josh@joshtriplett.org>
Cc: Matthew Garrett <mjg59@srcf.ucam.org>
Cc: Rafael J. Wysocki <rjw@rjwysocki.net>
Signed-off-by: NMatt Fleming <matt.fleming@intel.com>
      081cd62a
    • I
      x86: Disable CONFIG_X86_DECODER_SELFTEST in allmod/allyesconfigs · f8f20234
      由 Ingo Molnar 提交于 
      It can take some time to validate the image, make sure
{allyes|allmod}config doesn't enable it.

I'd say randconfig will cover it often enough, and the failure is also
borderline build coverage related: you cannot really make the decoder
test fail via source level changes, only with changes in the build
environment, so I agree with Andi that we can disable this one too.
Signed-off-by: NIngo Molnar <mingo@kernel.org>
Acked-by: Paul Gortmaker paul.gortmaker@windriver.com>
Suggested-and-acked-by: Andi Kleen andi@firstfloor.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
      f8f20234
  41. 04 2月, 2014 1 次提交