- 11 3月, 2017 1 次提交
-
-
由 Ido Schimmel 提交于
Most of the code concerned with the FIB notification chain currently resides in fib_trie.c, but this isn't really appropriate, as the FIB notification chain is also used for FIB rules. Therefore, it makes sense to move the common FIB notification code to a separate file and have it export the relevant functions, which can be invoked by its different users (e.g., fib_trie.c, fib_rules.c). Signed-off-by: NIdo Schimmel <idosch@mellanox.com> Signed-off-by: NJiri Pirko <jiri@mellanox.com> Acked-by: NDavid Ahern <dsa@cumulusnetworks.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
- 10 3月, 2017 2 次提交
-
-
由 Petr Machata 提交于
Add VLAN action offloading. Invoke it from Spectrum flower handler for "vlan modify" actions. Signed-off-by: NPetr Machata <petrm@mellanox.com> Reviewed-by: NIdo Schimmel <idosch@mellanox.com> Signed-off-by: NJiri Pirko <jiri@mellanox.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Alexey Kodanev 提交于
The functions that are returning tcp sequence number also setup TS offset value, so rename them to better describe their purpose. No functional changes in this patch. Suggested-by: NEric Dumazet <edumazet@google.com> Signed-off-by: NAlexey Kodanev <alexey.kodanev@oracle.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
- 09 3月, 2017 1 次提交
-
-
由 Eric Dumazet 提交于
__sk_dst_set() must be called while we own the socket. We can get proper lockdep coverage using lockdep_sock_is_held() and rcu_dereference_protected() Signed-off-by: NEric Dumazet <edumazet@google.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
- 03 3月, 2017 2 次提交
-
-
由 Pablo Neira Ayuso 提交于
The underlying nlmsg_multicast() already sets sk->sk_err for us to notify socket overruns, so we should not do anything with this return value. So we just call nfnetlink_set_err() if: 1) We fail to allocate the netlink message. or 2) We don't have enough space in the netlink message to place attributes, which means that we likely need to allocate a larger message. Before this patch, the internal ESRCH netlink error code was propagated to userspace, which is quite misleading. Netlink semantics mandate that listeners just hit ENOBUFS if the socket buffer overruns. Reported-by: NAlexander Alemayhu <alexander@alemayhu.com> Tested-by: NAlexander Alemayhu <alexander@alemayhu.com> Signed-off-by: NPablo Neira Ayuso <pablo@netfilter.org>
-
由 Arnaldo Carvalho de Melo 提交于
When handling problems in cloning a socket with the sk_clone_locked() function we need to perform several steps that were open coded in it and its callers, so introduce a routine to avoid this duplication: sk_free_unlock_clone(). Cc: Cong Wang <xiyou.wangcong@gmail.com> Cc: Dmitry Vyukov <dvyukov@google.com> Cc: Eric Dumazet <edumazet@google.com> Cc: Gerrit Renker <gerrit@erg.abdn.ac.uk> Cc: Thomas Gleixner <tglx@linutronix.de> Link: http://lkml.kernel.org/n/net-ui6laqkotycunhtmqryl9bfx@git.kernel.orgSigned-off-by: NArnaldo Carvalho de Melo <acme@redhat.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
- 02 3月, 2017 4 次提交
-
-
由 Ingo Molnar 提交于
We don't actually need the full rculist.h header in sched.h anymore, we will be able to include the smaller rcupdate.h header instead. But first update code that relied on the implicit header inclusion. Acked-by: NLinus Torvalds <torvalds@linux-foundation.org> Cc: Mike Galbraith <efault@gmx.de> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: linux-kernel@vger.kernel.org Signed-off-by: NIngo Molnar <mingo@kernel.org>
-
由 Ingo Molnar 提交于
sched/headers: Prepare to move signal wakeup & sigpending methods from <linux/sched.h> into <linux/sched/signal.h> Fix up affected files that include this signal functionality via sched.h. Acked-by: NLinus Torvalds <torvalds@linux-foundation.org> Cc: Mike Galbraith <efault@gmx.de> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: linux-kernel@vger.kernel.org Signed-off-by: NIngo Molnar <mingo@kernel.org>
-
由 Ingo Molnar 提交于
Add #include <linux/cred.h> dependencies to all .c files rely on sched.h doing that for them. Note that even if the count where we need to add extra headers seems high, it's still a net win, because <linux/sched.h> is included in over 2,200 files ... Acked-by: NLinus Torvalds <torvalds@linux-foundation.org> Cc: Mike Galbraith <efault@gmx.de> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: linux-kernel@vger.kernel.org Signed-off-by: NIngo Molnar <mingo@kernel.org>
-
由 Ingo Molnar 提交于
We are going to split <linux/sched/clock.h> out of <linux/sched.h>, which will have to be picked up from other headers and .c files. Create a trivial placeholder <linux/sched/clock.h> file that just maps to <linux/sched.h> to make this patch obviously correct and bisectable. Include the new header in the files that are going to need it. Acked-by: NLinus Torvalds <torvalds@linux-foundation.org> Cc: Mike Galbraith <efault@gmx.de> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: linux-kernel@vger.kernel.org Signed-off-by: NIngo Molnar <mingo@kernel.org>
-
- 28 2月, 2017 2 次提交
-
-
由 Masahiro Yamada 提交于
Fix typos and add the following to the scripts/spelling.txt: disassocation||disassociation Link: http://lkml.kernel.org/r/1481573103-11329-27-git-send-email-yamada.masahiro@socionext.comSigned-off-by: NMasahiro Yamada <yamada.masahiro@socionext.com> Signed-off-by: NAndrew Morton <akpm@linux-foundation.org> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
由 Masahiro Yamada 提交于
Fix typos and add the following to the scripts/spelling.txt: an user||a user an userspace||a userspace I also added "userspace" to the list since it is a common word in Linux. I found some instances for "an userfaultfd", but I did not add it to the list. I felt it is endless to find words that start with "user" such as "userland" etc., so must draw a line somewhere. Link: http://lkml.kernel.org/r/1481573103-11329-4-git-send-email-yamada.masahiro@socionext.comSigned-off-by: NMasahiro Yamada <yamada.masahiro@socionext.com> Signed-off-by: NAndrew Morton <akpm@linux-foundation.org> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
- 20 2月, 2017 9 次提交
-
-
由 Xin Long 提交于
This patch is to add support for MSG_MORE on sctp. It adds force_delay in sctp_datamsg to save MSG_MORE, and sets it after creating datamsg according to the send flag. sctp_packet_can_append_data then uses it to decide if the chunks of this msg will be sent at once or delay it. Note that unlike [1], this patch saves MSG_MORE in datamsg, instead of in assoc. As sctp enqueues the chunks first, then dequeue them one by one. If it's saved in assoc,the current msg's send flag (MSG_MORE) may affect other chunks' bundling. Since last patch, sctp flush out queue once assoc state falls into SHUTDOWN_PENDING, the close block problem mentioned in [1] has been solved as well. [1] https://patchwork.ozlabs.org/patch/372404/Signed-off-by: NXin Long <lucien.xin@gmail.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Xin Long 提交于
Now when sending a packet, sctp_transport_dst_check will check if dst is obsolete by calling ipv4/ip6_dst_check. But they return obsolete only when adding a new cache, after that when the cache's pmtu is updated again, it will not trigger transport->dst/pmtu's update. It can be reproduced by reducing route's pmtu twice. At the 1st time client will add a new cache, and transport->pathmtu gets updated as sctp_transport_dst_check finds it's obsolete. But at the 2nd time, cache's mtu is updated, sctp client will never send out any packet, because transport->pmtu has no chance to update. This patch is to fix this by also checking if transport pmtu is dst mtu in sctp_transport_dst_check, so that transport->pmtu can be updated on time. Signed-off-by: NXin Long <lucien.xin@gmail.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Xin Long 提交于
This patch is to add reconf chunk event based on the sctp event frame in rx path, it will call sctp_sf_do_reconf to process the reconf chunk. Signed-off-by: NXin Long <lucien.xin@gmail.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Xin Long 提交于
This patch is to add a function to process the incoming reconf chunk, in which it verifies the chunk, and traverses the param and process it with the right function one by one. sctp_sf_do_reconf would be the process function of reconf chunk event. Signed-off-by: NXin Long <lucien.xin@gmail.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Xin Long 提交于
This patch is to add a function sctp_verify_reconf to do some length check and multi-params check for sctp stream reconf according to rfc6525 section 3.1. Signed-off-by: NXin Long <lucien.xin@gmail.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Xin Long 提交于
This patch is to implement Receiver-Side Procedures for the Incoming SSN Reset Request Parameter described in rfc6525 section 5.2.3. It's also to move str_list endian conversion out of sctp_make_strreset_req, so that sctp_make_strreset_req can be used more conveniently to process inreq. Signed-off-by: NXin Long <lucien.xin@gmail.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Xin Long 提交于
This patch is to implement Receiver-Side Procedures for the Outgoing SSN Reset Request Parameter described in rfc6525 section 5.2.2. Note that some checks must be after request_seq check, as even those checks fail, strreset_inseq still has to be increase by 1. Signed-off-by: NXin Long <lucien.xin@gmail.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Xin Long 提交于
This patch is to add Stream Reset Event described in rfc6525 section 6.1.1. Signed-off-by: NXin Long <lucien.xin@gmail.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Xin Long 提交于
This patch is to define Re-configuration Response Parameter described in rfc6525 section 4.4. As optional fields are only for SSN/TSN Reset Request Parameter, it uses another function to make that. Signed-off-by: NXin Long <lucien.xin@gmail.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
- 18 2月, 2017 1 次提交
-
-
由 Or Gerlitz 提交于
Currently there is no way of querying whether a filter is offloaded to HW or not when using "both" policy (where none of skip_sw or skip_hw flags are set by user-space). Add two new flags, "in hw" and "not in hw" such that user space can determine if a filter is actually offloaded to hw or not. The "in hw" UAPI semantics was chosen so it's similar to the "skip hw" flag logic. If none of these two flags are set, this signals running over older kernel. Signed-off-by: NOr Gerlitz <ogerlitz@mellanox.com> Reviewed-by: NAmir Vadai <amir@vadai.me> Acked-by: NJiri Pirko <jiri@mellanox.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
- 16 2月, 2017 1 次提交
-
-
由 Jiri Pirko 提交于
This fixes broken build for !NET_CLS: net/built-in.o: In function `fq_codel_destroy': /home/sab/linux/net-next/net/sched/sch_fq_codel.c:468: undefined reference to `tcf_destroy_chain' Fixes: cf1facda ("sched: move tcf_proto_destroy and tcf_destroy_chain helpers into cls_api") Reported-by: NSabrina Dubroca <sd@queasysnail.net> Signed-off-by: NJiri Pirko <jiri@mellanox.com> Tested-by: NSabrina Dubroca <sd@queasysnail.net> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
- 15 2月, 2017 4 次提交
-
-
由 Steffen Klassert 提交于
This patch adds GRO ifrastructure and callbacks for ESP on ipv4 and ipv6. In case the GRO layer detects an ESP packet, the esp{4,6}_gro_receive() function does a xfrm state lookup and calls the xfrm input layer if it finds a matching state. The packet will be decapsulated and reinjected it into layer 2. Signed-off-by: NSteffen Klassert <steffen.klassert@secunet.com>
-
由 Steffen Klassert 提交于
We need to keep per packet offloading informations across the layers. So we extend the sec_path to carry these for the input and output offload codepath. Signed-off-by: NSteffen Klassert <steffen.klassert@secunet.com>
-
由 Steffen Klassert 提交于
We need it in the ESP offload handlers, so export it. Signed-off-by: NSteffen Klassert <steffen.klassert@secunet.com>
-
由 Steffen Klassert 提交于
Add a new helper to set the secpath to the skb. This avoids code duplication, as this is used in multiple places. Signed-off-by: NSteffen Klassert <steffen.klassert@secunet.com>
-
- 14 2月, 2017 1 次提交
-
-
由 Eric Dumazet 提交于
Commit 79e7fff4 ("net: remove support for per driver ndo_busy_poll()") made them obsolete. Signed-off-by: NEric Dumazet <edumazet@google.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
- 12 2月, 2017 2 次提交
-
-
由 Pablo Neira Ayuso 提交于
This new attribute allows us to uniquely identify a rule in transaction. Robots may trigger an insertion followed by deletion in a batch, in that scenario we still don't have a public rule handle that we can use to delete the rule. This is similar to the NFTA_SET_ID attribute that allows us to refer to an anonymous set from a batch. Signed-off-by: NPablo Neira Ayuso <pablo@netfilter.org>
-
由 Julian Anastasov 提交于
After the dst->pending_confirm flag was removed, we do not need anymore to provide dst arg to dst_neigh_output. So, rename it to neigh_output as before commit 5110effe ("net: Do delayed neigh confirmation."). Signed-off-by: NJulian Anastasov <ja@ssi.bg> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
- 11 2月, 2017 8 次提交
-
-
由 Russell King 提交于
Including phy.h and phy_fixed.h into net/dsa.h causes phy*.h to be an unnecessary dependency for quite a large amount of the kernel. There's very little which actually requires definitions from phy.h in net/dsa.h - the include itself only wants the declaration of a couple of structures and IFNAMSIZ. Add linux/if.h for IFNAMSIZ, declarations for the structures, phy.h to mv88e6xxx.h as it needs it for phy_interface_t, and remove both phy.h and phy_fixed.h from net/dsa.h. This patch reduces from around 800 files rebuilt to around 40 - even with ccache, the time difference is noticable. Tested-by: NVivien Didelot <vivien.didelot@savoirfairelinux.com> Reviewed-by: NFlorian Fainelli <f.fainelli@gmail.com> Signed-off-by: NRussell King <rmk+kernel@armlinux.org.uk> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Amir Vadai 提交于
This command could be useful to inc/dec fields. For example, to forward any TCP packet and decrease its TTL: $ tc filter add dev enp0s9 protocol ip parent ffff: \ flower ip_proto tcp \ action pedit munge ip ttl add 0xff pipe \ action mirred egress redirect dev veth0 In the example above, adding 0xff to this u8 field is actually decreasing it by one, since the operation is masked. Signed-off-by: NAmir Vadai <amir@vadai.me> Reviewed-by: NOr Gerlitz <ogerlitz@mellanox.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Amir Vadai 提交于
Extend pedit to enable the user setting offset relative to network headers. This change would enable to work with more complex header schemes (vs the simple IPv4 case) where setting a fixed offset relative to the network header is not enough. After this patch, the action has information about the exact header type and field inside this header. This information could be used later on for hardware offloading of pedit. Backward compatibility was being kept: 1. Old kernel <-> new userspace 2. New kernel <-> old userspace 3. add rule using new userspace <-> dump using old userspace 4. add rule using old userspace <-> dump using new userspace When using the extended api, new netlink attributes are being used. This way, operation will fail in (1) and (3) - and no malformed rule be added or dumped. Of course, new user space that doesn't need the new functionality can use the old netlink attributes and operation will succeed. Since action can support both api's, (2) should work, and it is easy to write the new user space to have (4) work. The action is having a strict check that only header types and commands it can handle are accepted. This way future additions will be much easier. Usage example: $ tc filter add dev enp0s9 protocol ip parent ffff: \ flower \ ip_proto tcp \ dst_port 80 \ action pedit munge tcp dport set 8080 pipe \ action mirred egress redirect dev veth0 Will forward tcp port whose original dest port is 80, while modifying the destination port to 8080. Signed-off-by: NAmir Vadai <amir@vadai.me> Reviewed-by: NOr Gerlitz <ogerlitz@mellanox.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Nogah Frankel 提交于
Offload the mc router ports list, whenever it is being changed. It is done because in some cases mc packets needs to be flooded to all the ports in this list. Signed-off-by: NNogah Frankel <nogahf@mellanox.com> Signed-off-by: NYotam Gigi <yotamg@mellanox.com> Signed-off-by: NJiri Pirko <jiri@mellanox.com> Acked-by: NIvan Vecera <ivecera@redhat.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Nogah Frankel 提交于
Offload multicast disabled flag, for more accurate mc flood behavior: When it is on, the mdb should be ignored. When it is off, unregistered mc packets should be flooded to mc router ports. Signed-off-by: NNogah Frankel <nogahf@mellanox.com> Signed-off-by: NYotam Gigi <yotamg@mellanox.com> Signed-off-by: NJiri Pirko <jiri@mellanox.com> Acked-by: NIvan Vecera <ivecera@redhat.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Jiri Pirko 提交于
Creation is done in this file, move destruction to be at the same place. Signed-off-by: NJiri Pirko <jiri@mellanox.com> Acked-by: NJamal Hadi Salim <jhs@mojatatu.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Jiri Pirko 提交于
This function destroys TC filter protocol, not TC filter. So name it accordingly. Signed-off-by: NJiri Pirko <jiri@mellanox.com> Acked-by: NJamal Hadi Salim <jhs@mojatatu.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Ido Schimmel 提交于
The FIB notification chain currently uses the NLM_F_{REPLACE,APPEND} flags to signal routes being replaced or appended. Instead of using netlink flags for in-kernel notifications we can simply introduce two new events in the FIB notification chain. This has the added advantage of making the API cleaner, thereby making it clear that these events should be supported by listeners of the notification chain. Signed-off-by: NIdo Schimmel <idosch@mellanox.com> Signed-off-by: NJiri Pirko <jiri@mellanox.com> CC: Patrick McHardy <kaber@trash.net> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
- 10 2月, 2017 2 次提交
-
-
由 Xin Long 提交于
This patch is to implement Sender-Side Procedures for the Add Outgoing and Incoming Streams Request Parameter described in rfc6525 section 5.1.5-5.1.6. It is also to add sockopt SCTP_ADD_STREAMS in rfc6525 section 6.3.4 for users. Signed-off-by: NXin Long <lucien.xin@gmail.com> Acked-by: NMarcelo Ricardo Leitner <marcelo.leitner@gmail.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Xin Long 提交于
This patch is to define Add Incoming/Outgoing Streams Request Parameter described in rfc6525 section 4.5 and 4.6. They can be in one same chunk trunk as rfc6525 section 3.1-7 describes, so make them in one function. Signed-off-by: NXin Long <lucien.xin@gmail.com> Acked-by: NMarcelo Ricardo Leitner <marcelo.leitner@gmail.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-