There just check the user call ID isn't already in use, hence should
compare user_call_ID with xcall->user_call_ID, which is current
node's user_call_ID.

Fixes: 540b1c48 ("rxrpc: Fix deadlock between call creation and sendmsg/recvmsg")
Suggested-by: NDavid Howells <dhowells@redhat.com>
Signed-off-by: NYueHaibing <yuehaibing@huawei.com>
Signed-off-by: NDavid Howells <dhowells@redhat.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

If a DSA slave network device was previously disabled, there is no need
to suspend or resume it.

Fixes: 24462549 ("net: dsa: allow switch drivers to implement suspend/resume hooks")
Signed-off-by: NFlorian Fainelli <f.fainelli@gmail.com>
Reviewed-by: NAndrew Lunn <andrew@lunn.ch>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

'protocol' is a user-controlled value, so sanitize it after the bounds
check to avoid using it for speculative out-of-bounds access to arrays
indexed by it.

This addresses the following accesses detected with the help of smatch:

* net/netlink/af_netlink.c:654 __netlink_create() warn: potential
  spectre issue 'nlk_cb_mutex_keys' [w]

* net/netlink/af_netlink.c:654 __netlink_create() warn: potential
  spectre issue 'nlk_cb_mutex_key_strings' [w]

* net/netlink/af_netlink.c:685 netlink_create() warn: potential spectre
  issue 'nl_table' [w] (local cap)

Cc: Josh Poimboeuf <jpoimboe@redhat.com>
Signed-off-by: NJeremy Cline <jcline@redhat.com>
Reviewed-by: NJosh Poimboeuf <jpoimboe@redhat.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Add overline heading adornment to document title in order to comply
with kernel doc requirements.

Fixes: 60b91319 staging: fsl-mc: Convert documentation to rst format
Signed-off-by: NIoana Ciornei <ioana.ciornei@nxp.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

WoL won't work in PCI-based setups because we are not saving the PCI EP
state before entering suspend state and not allowing D3 wake.

Fix this by using a wrapper around stmmac_{suspend/resume} which
correctly sets the PCI EP state.
Signed-off-by: NJose Abreu <joabreu@synopsys.com>
Cc: David S. Miller <davem@davemloft.net>
Cc: Joao Pinto <jpinto@synopsys.com>
Cc: Giuseppe Cavallaro <peppe.cavallaro@st.com>
Cc: Alexandre Torgue <alexandre.torgue@st.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

syzbot found that the following sequence produces a LOCKDEP splat [1]

ip link add bond10 type bond
ip link add bond11 type bond
ip link set bond11 master bond10

To fix this, we can use the already provided nest_level.

This patch also provides correct nesting for dev->addr_list_lock

[1]
WARNING: possible recursive locking detected
4.18.0-rc6+ #167 Not tainted
--------------------------------------------
syz-executor751/4439 is trying to acquire lock:
(____ptrval____) (&(&bond->stats_lock)->rlock){+.+.}, at: spin_lock include/linux/spinlock.h:310 [inline]
(____ptrval____) (&(&bond->stats_lock)->rlock){+.+.}, at: bond_get_stats+0xb4/0x560 drivers/net/bonding/bond_main.c:3426

but task is already holding lock:
(____ptrval____) (&(&bond->stats_lock)->rlock){+.+.}, at: spin_lock include/linux/spinlock.h:310 [inline]
(____ptrval____) (&(&bond->stats_lock)->rlock){+.+.}, at: bond_get_stats+0xb4/0x560 drivers/net/bonding/bond_main.c:3426

other info that might help us debug this:
 Possible unsafe locking scenario:

       CPU0
       ----
  lock(&(&bond->stats_lock)->rlock);
  lock(&(&bond->stats_lock)->rlock);

 *** DEADLOCK ***

 May be due to missing lock nesting notation

3 locks held by syz-executor751/4439:
 #0: (____ptrval____) (rtnl_mutex){+.+.}, at: rtnl_lock+0x17/0x20 net/core/rtnetlink.c:77
 #1: (____ptrval____) (&(&bond->stats_lock)->rlock){+.+.}, at: spin_lock include/linux/spinlock.h:310 [inline]
 #1: (____ptrval____) (&(&bond->stats_lock)->rlock){+.+.}, at: bond_get_stats+0xb4/0x560 drivers/net/bonding/bond_main.c:3426
 #2: (____ptrval____) (rcu_read_lock){....}, at: bond_get_stats+0x0/0x560 include/linux/compiler.h:215

stack backtrace:
CPU: 0 PID: 4439 Comm: syz-executor751 Not tainted 4.18.0-rc6+ #167
Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 01/01/2011
Call Trace:
 __dump_stack lib/dump_stack.c:77 [inline]
 dump_stack+0x1c9/0x2b4 lib/dump_stack.c:113
 print_deadlock_bug kernel/locking/lockdep.c:1765 [inline]
 check_deadlock kernel/locking/lockdep.c:1809 [inline]
 validate_chain kernel/locking/lockdep.c:2405 [inline]
 __lock_acquire.cold.64+0x1fb/0x486 kernel/locking/lockdep.c:3435
 lock_acquire+0x1e4/0x540 kernel/locking/lockdep.c:3924
 __raw_spin_lock include/linux/spinlock_api_smp.h:142 [inline]
 _raw_spin_lock+0x2a/0x40 kernel/locking/spinlock.c:144
 spin_lock include/linux/spinlock.h:310 [inline]
 bond_get_stats+0xb4/0x560 drivers/net/bonding/bond_main.c:3426
 dev_get_stats+0x10f/0x470 net/core/dev.c:8316
 bond_get_stats+0x232/0x560 drivers/net/bonding/bond_main.c:3432
 dev_get_stats+0x10f/0x470 net/core/dev.c:8316
 rtnl_fill_stats+0x4d/0xac0 net/core/rtnetlink.c:1169
 rtnl_fill_ifinfo+0x1aa6/0x3fb0 net/core/rtnetlink.c:1611
 rtmsg_ifinfo_build_skb+0xc8/0x190 net/core/rtnetlink.c:3268
 rtmsg_ifinfo_event.part.30+0x45/0xe0 net/core/rtnetlink.c:3300
 rtmsg_ifinfo_event net/core/rtnetlink.c:3297 [inline]
 rtnetlink_event+0x144/0x170 net/core/rtnetlink.c:4716
 notifier_call_chain+0x180/0x390 kernel/notifier.c:93
 __raw_notifier_call_chain kernel/notifier.c:394 [inline]
 raw_notifier_call_chain+0x2d/0x40 kernel/notifier.c:401
 call_netdevice_notifiers_info+0x3f/0x90 net/core/dev.c:1735
 call_netdevice_notifiers net/core/dev.c:1753 [inline]
 netdev_features_change net/core/dev.c:1321 [inline]
 netdev_change_features+0xb3/0x110 net/core/dev.c:7759
 bond_compute_features.isra.47+0x585/0xa50 drivers/net/bonding/bond_main.c:1120
 bond_enslave+0x1b25/0x5da0 drivers/net/bonding/bond_main.c:1755
 bond_do_ioctl+0x7cb/0xae0 drivers/net/bonding/bond_main.c:3528
 dev_ifsioc+0x43c/0xb30 net/core/dev_ioctl.c:327
 dev_ioctl+0x1b5/0xcc0 net/core/dev_ioctl.c:493
 sock_do_ioctl+0x1d3/0x3e0 net/socket.c:992
 sock_ioctl+0x30d/0x680 net/socket.c:1093
 vfs_ioctl fs/ioctl.c:46 [inline]
 file_ioctl fs/ioctl.c:500 [inline]
 do_vfs_ioctl+0x1de/0x1720 fs/ioctl.c:684
 ksys_ioctl+0xa9/0xd0 fs/ioctl.c:701
 __do_sys_ioctl fs/ioctl.c:708 [inline]
 __se_sys_ioctl fs/ioctl.c:706 [inline]
 __x64_sys_ioctl+0x73/0xb0 fs/ioctl.c:706
 do_syscall_64+0x1b9/0x820 arch/x86/entry/common.c:290
 entry_SYSCALL_64_after_hwframe+0x49/0xbe
RIP: 0033:0x440859
Code: e8 2c af 02 00 48 83 c4 18 c3 0f 1f 80 00 00 00 00 48 89 f8 48 89 f7 48 89 d6 48 89 ca 4d 89 c2 4d 89 c8 4c 8b 4c 24 08 0f 05 <48> 3d 01 f0 ff ff 0f 83 3b 10 fc ff c3 66 2e 0f 1f 84 00 00 00 00
RSP: 002b:00007ffc51a92878 EFLAGS: 00000213 ORIG_RAX: 0000000000000010
RAX: ffffffffffffffda RBX: 0000000000000000 RCX: 0000000000440859
RDX: 0000000020000040 RSI: 0000000000008990 RDI: 0000000000000003
RBP: 0000000000000000 R08: 00000000004002c8 R09: 00000000004002c8
R10: 00000000022d5880 R11: 0000000000000213 R12: 0000000000007390
R13: 0000000000401db0 R14: 0000000000000000 R15: 0000000000000000
Signed-off-by: NEric Dumazet <edumazet@google.com>
Cc: Jay Vosburgh <j.vosburgh@gmail.com>
Cc: Veaceslav Falico <vfalico@gmail.com>
Cc: Andy Gospodarek <andy@greyhouse.net>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

In commit ab123fe0 ("enic: handle mtu change for vf properly")
ASSERT_RTNL() is added to _enic_change_mtu() to prevent it from being
called without rtnl held. enic_probe() calls enic_change_mtu()
without rtnl held. At this point netdev is not registered yet.
Remove call to enic_change_mtu and assign the mtu to netdev->mtu.

Fixes: ab123fe0 ("enic: handle mtu change for vf properly")
Signed-off-by: NGovindarajulu Varadarajan <gvaradar@cisco.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

ip_frag_queue() might call pskb_pull() on one skb that
is already in the fragment queue.

We need to take care of possible truesize change, or we
might have an imbalance of the netns frags memory usage.

IPv6 is immune to this bug, because RFC5722, Section 4,
amended by Errata ID 3089 states :

  When reassembling an IPv6 datagram, if
  one or more its constituent fragments is determined to be an
  overlapping fragment, the entire datagram (and any constituent
  fragments) MUST be silently discarded.

Fixes: 158f323b ("net: adjust skb->truesize in pskb_expand_head()")
Signed-off-by: NEric Dumazet <edumazet@google.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

We currently check current frags memory usage only when
a new frag queue is created. This allows attackers to first
consume the memory budget (default : 4 MB) creating thousands
of frag queues, then sending tiny skbs to exceed high_thresh
limit by 2 to 3 order of magnitude.

Note that before commit 648700f7 ("inet: frags: use rhashtables
for reassembly units"), work queue could be starved under DOS,
getting no cpu cycles.
After commit 648700f7, only the per frag queue timer can eventually
remove an incomplete frag queue and its skbs.

Fixes: b13d3cbf ("inet: frag: move eviction of queues to work queue")
Signed-off-by: NEric Dumazet <edumazet@google.com>
Reported-by: NJann Horn <jannh@google.com>
Cc: Florian Westphal <fw@strlen.de>
Cc: Peter Oskolkov <posk@google.com>
Cc: Paolo Abeni <pabeni@redhat.com>
Acked-by: NFlorian Westphal <fw@strlen.de>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Saeed Mahameed says:

====================
Mellanox, mlx5 fixes 2018-07-31

The following series includes four mlx5 fixes.

Please pull and let me know if there's any problem.

For -stable v4.14
net/mlx5e: E-Switch, Initialize eswitch only if eswitch manager

For -stable v4.16
net/mlx5e: Set port trust mode to PCP as default

For -stable v4.17
net/mlx5e: IPoIB, Set the netdevice sw mtu in ipoib enhanced flow
====================
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

After introduction of the cited commit, mlx5e_build_nic_params
receives the netdevice mtu in order to set the sw_mtu of mlx5e_params.
For enhanced IPoIB, the netdevice mtu is not set in this stage,
therefore, the initial sw_mtu equals zero. As a result, the hw_mtu
of the receive queue will be calculated incorrectly causing traffic
issues.

To fix this issue, query for port mtu before building the nic params.

Fixes: 472a1e44 ("net/mlx5e: Save MTU in channels params")
Signed-off-by: NFeras Daoud <ferasda@mellanox.com>
Reviewed-by: NTariq Toukan <tariqt@mellanox.com>
Signed-off-by: NSaeed Mahameed <saeedm@mellanox.com>

MTU helper function is used by both conventional mlx5e
instances (PF/VF) and the eswitch representors. The representor
shouldn't change the nic vport context MTU, the VF is responsible for
that. Therefore set_mtu_cb has a null value when changing the
representor MTU.

Fixes: 250a42b6 ("net/mlx5e: Support configurable MTU for vport representors")
Signed-off-by: NAdi Nissim <adin@mellanox.com>
Reviewed-by: NYevgeny Kliteynik <kliteyn@mellanox.com>
Signed-off-by: NSaeed Mahameed <saeedm@mellanox.com>

The hairpin offload code has dependency on the trust mode being PCP.

Hence we should set PCP as the default for handling cases where we are
disallowed to read the trust mode from the FW, or failed to initialize it.

Fixes: 106be53b ('net/mlx5e: Set per priority hairpin pairs')
Signed-off-by: NOr Gerlitz <ogerlitz@mellanox.com>
Reviewed-by: NParav Pandit <parav@mellanox.com>
Signed-off-by: NSaeed Mahameed <saeedm@mellanox.com>

Execute mlx5_eswitch_init() only if we have MLX5_ESWITCH_MANAGER
capabilities.
Do the same for mlx5_eswitch_cleanup().

Fixes: a9f7705f ("net/mlx5: Unify vport manager capability check")
Signed-off-by: NEli Cohen <eli@mellanox.com>
Signed-off-by: NSaeed Mahameed <saeedm@mellanox.com>

Version 1 of the patch adding SERDES support to the 88E6141/6341
correctly added the ops to the 88E6141/6341. However, by the time
version 3 was committed, the ops had moved to the 88E6085/6175. Put
them back where they belong.

Fixes: 5bafeb6e ("net: dsa: mv88e6xxx: 88E6141/6341 SERDES support")
Signed-off-by: NAndrew Lunn <andrew@lunn.ch>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Merge tag 'wireless-drivers-for-davem-2018-07-31' of git://git.kernel.org/pub/scm/linux/kernel/git/kvalo/wireless-drivers

Kalle Valo says:

====================
wireless-drivers fixes for 4.18

Last set of fixes before 4.18 is released

iwlwifi

* add new IDs for cards already available on the market

brcmfmac

* fix a regression introduced in v4.17
====================
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Pull SCSI fixes from James Bottomley:
 "Nine fixes, five in the qla2xxx driver, the most serious of which is
  the uninitialized list head crash which can be observed in most
  systems under a sufficiently loaded low memory environment.

  The two sg fixes are minor but obvious and two target ones which seem
  reasonable but not high impact"

* tag 'scsi-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi:
  scsi: qla2xxx: Return error when TMF returns
  scsi: qla2xxx: Fix ISP recovery on unload
  scsi: qla2xxx: Fix driver unload by shutting down chip
  scsi: qla2xxx: Fix NPIV deletion by calling wait_for_sess_deletion
  scsi: qla2xxx: Fix unintialized List head crash
  scsi: sg: update comment for blk_get_request()
  scsi: sg: fix minor memory leak in error path
  scsi: libiscsi: fix possible NULL pointer dereference in case of TMF
  scsi: target: iscsi: cxgbit: fix max iso npdu calculation

Pull virtio fixes from Michael Tsirkin:
 "Some bugfixes that seem important and safe enough to merge at the last
  minute"

* tag 'for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/mst/vhost:
  virtio_balloon: fix another race between migration and ballooning
  tools/virtio: add kmalloc_array stub
  tools/virtio: add dma barrier stubs

Pull ACPI fixes from Rafael Wysocki:
 "These fix a recent ACPICA regression affecting control method
  execution at the table level and an earlier hibernation regression in
  the ACPI driver for Intel SoCs (LPSS) that was missed by a previous
  fix in this cycle.

  Specifics:

   - Fix a recent ACPICA regression introduced by a previous fix that
     caused control method execution at the table level to be mishandled
     by mistake (Erik Schmauss).

   - Fix a hibernation regression from the 4.15 cycle in the ACPI driver
     for Intel SoCs (LPSS) that caused the platform firmware to be
     confused during resume from hibernation by the driver's PM quirks
     which was fixed for system-wide suspend/resume (ACPI S3) earlier in
     this cycle, but that previous fix missed the hibernation (ACPI S4)
     case (Rafael Wysocki)"

* tag 'acpi-urgent-4.18' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm:
  ACPICA: AML Parser: ignore control method status in module-level code
  ACPI / LPSS: Avoid PM quirks on suspend and resume from hibernation

Merge a fix for hibernation regression in the ACPI driver for Intel
SoCs (LPSS).

* acpi-soc:
  ACPI / LPSS: Avoid PM quirks on suspend and resume from hibernation

Pull networking fixes from David Miller:
 "Several smallish fixes, I don't think any of this requires another -rc
  but I'll leave that up to you:

   1) Don't leak uninitialzed bytes to userspace in xfrm_user, from Eric
      Dumazet.

   2) Route leak in xfrm_lookup_route(), from Tommi Rantala.

   3) Premature poll() returns in AF_XDP, from Björn Töpel.

   4) devlink leak in netdevsim, from Jakub Kicinski.

   5) Don't BUG_ON in fib_compute_spec_dst, the condition can
      legitimately happen. From Lorenzo Bianconi.

   6) Fix some spectre v1 gadgets in generic socket code, from Jeremy
      Cline.

   7) Don't allow user to bind to out of range multicast groups, from
      Dmitry Safonov with a follow-up by Dmitry Safonov.

   8) Fix metrics leak in fib6_drop_pcpu_from(), from Sabrina Dubroca"

* git://git.kernel.org/pub/scm/linux/kernel/git/davem/net: (41 commits)
  netlink: Don't shift with UB on nlk->ngroups
  net/ipv6: fix metrics leak
  xen-netfront: wait xenbus state change when load module manually
  can: ems_usb: Fix memory leak on ems_usb_disconnect()
  openvswitch: meter: Fix setting meter id for new entries
  netlink: Do not subscribe to non-existent groups
  NET: stmmac: align DMA stuff to largest cache line length
  tcp_bbr: fix bw probing to raise in-flight data for very small BDPs
  net: socket: Fix potential spectre v1 gadget in sock_is_registered
  net: socket: fix potential spectre v1 gadget in socketcall
  net: mdio-mux: bcm-iproc: fix wrong getter and setter pair
  ipv4: remove BUG_ON() from fib_compute_spec_dst
  enic: handle mtu change for vf properly
  net: lan78xx: fix rx handling before first packet is send
  nfp: flower: fix port metadata conversion bug
  bpf: use GFP_ATOMIC instead of GFP_KERNEL in bpf_parse_prog()
  bpf: fix bpf_skb_load_bytes_relative pkt length check
  perf build: Build error in libbpf missing initialization
  net: ena: Fix use of uninitialized DMA address bits field
  bpf: btf: Use exact btf value_size match in map_check_btf()
  ...

Pull sparc fixes from David Miller:
 "Some small __init annotation and build fixes from Stephen Rostedt and
  Thomas Petazzoni"

* git://git.kernel.org/pub/scm/linux/kernel/git/davem/sparc:
  sparc: use asm-generic version of msi.h
  sparc: move MSI related definitions to where they are used
  sparc/time: Add missing __init to init_tick_ops()

Anatoly reports another squashfs fuzzing issue, where the decompression
parameters themselves are in a compressed block.

This causes squashfs_read_data() to be called in order to read the
decompression options before the decompression stream having been set
up, making squashfs go sideways.
Reported-by: NAnatoly Trosinenko <anatoly.trosinenko@gmail.com>
Acked-by: NPhillip Lougher <phillip.lougher@gmail.com>
Cc: stable@kernel.org
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

This is necessary to be able to include <linux/msi.h> when
CONFIG_GENERIC_MSI_IRQ_DOMAIN is enabled. Without this, a build with
CONFIG_GENERIC_MSI_IRQ_DOMAIN fails with:

   In file included from drivers//ata/ahci.c:45:0:
>> include/linux/msi.h:226:10: error: unknown type name 'msi_alloc_info_t'; did you mean 'sg_alloc_fn'?
             msi_alloc_info_t *arg);
             ^~~~~~~~~~~~~~~~
             sg_alloc_fn
   include/linux/msi.h:230:9: error: unknown type name 'msi_alloc_info_t'; did you mean 'sg_alloc_fn'?
            msi_alloc_info_t *arg);
            ^~~~~~~~~~~~~~~~
            sg_alloc_fn
   include/linux/msi.h:239:12: error: unknown type name 'msi_alloc_info_t'; did you mean 'sg_alloc_fn'?
               msi_alloc_info_t *arg);
               ^~~~~~~~~~~~~~~~
               sg_alloc_fn
   include/linux/msi.h:240:22: error: unknown type name 'msi_alloc_info_t'; did you mean 'sg_alloc_fn'?
     void  (*msi_finish)(msi_alloc_info_t *arg, int retval);
                         ^~~~~~~~~~~~~~~~
                         sg_alloc_fn
   include/linux/msi.h:241:20: error: unknown type name 'msi_alloc_info_t'; did you mean 'sg_alloc_fn'?
     void  (*set_desc)(msi_alloc_info_t *arg,
                       ^~~~~~~~~~~~~~~~
                       sg_alloc_fn
   include/linux/msi.h:316:18: error: unknown type name 'msi_alloc_info_t'; did you mean 'sg_alloc_fn'?
           int nvec, msi_alloc_info_t *args);
                     ^~~~~~~~~~~~~~~~
                     sg_alloc_fn
   include/linux/msi.h:318:29: error: unknown type name 'msi_alloc_info_t'; did you mean 'sg_alloc_fn'?
            int virq, int nvec, msi_alloc_info_t *args);
                                ^~~~~~~~~~~~~~~~
                                sg_alloc_fn
Signed-off-by: NThomas Petazzoni <thomas.petazzoni@bootlin.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

The definitions in arch/sparc/include/asm/msi.h are only used in
arch/sparc/mm/srmmu.c, so it makes sense to have them in the C file
directly.

In addition, having a custom arch/sparc/include/asm/msi.h prevents
from using the asm-generic version of this header, which is necessary
to be able to include <linux/msi.h> when CONFIG_GENERIC_MSI_IRQ_DOMAIN
is enabled.
Signed-off-by: NThomas Petazzoni <thomas.petazzoni@bootlin.com>
Acked-by: NSam Ravnborg <sam@ravnborg.org>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Code that was added to force gcc not to inline any function that isn't
explicitly declared as inline uncovered that init_tick_ops() isn't
marked as "__init". It is only called by __init functions and more
importantly it too calls an __init function which would require it to be
__init as well.

Link: http://lkml.kernel.org/r/201806060444.hdHcKOBy%fengguang.wu@intel.comReported-by: Nkbuild test robot <lkp@intel.com>
Signed-off-by: NSteven Rostedt (VMware) <rostedt@goodmis.org>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

On i386 nlk->ngroups might be 32 or 0. Which leads to UB, resulting in
hang during boot.
Check for 0 ngroups and use (unsigned long long) as a type to shift.

Fixes: 7acf9d42 ("netlink: Do not subscribe to non-existent groups").
Reported-by: Nkernel test robot <rong.a.chen@intel.com>
Signed-off-by: NDmitry Safonov <dima@arista.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Merge tag 'linux-can-fixes-for-4.18-20180730' of ssh://gitolite.kernel.org/pub/scm/linux/kernel/git/mkl/linux-can

Marc Kleine-Budde says:

====================
pull-request: can 2018-07-30

this is a pull request of one patch for net/master.

The patch by Anton Vasilyev and the Linux Driver Verification project
fixes a memory leak in the ems_usb driver's disconnect function.
====================
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Pull x86 fixes from Ingo Molnar:
 "Misc fixes:

   - a build race fix

   - a Xen entry fix

   - a TSC_DEADLINE quirk future-proofing fix"

* 'x86-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  x86/boot: Fix if_changed build flip/flop bug
  x86/entry/64: Remove %ebx handling from error_entry/exit
  x86/apic: Future-proof the TSC_DEADLINE quirk for SKX

Pull scheduler fixes from Ingo Molnar:
 "Misc fixes:

   - a deadline scheduler related bug fix which triggered a kernel
     warning

   - an RT_RUNTIME_SHARE fix

   - a stop_machine preemption fix

   - a potential NULL dereference fix in sched_domain_debug_one()"

* 'sched-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  sched/rt: Restore rt_runtime after disabling RT_RUNTIME_SHARE
  sched/deadline: Update rq_clock of later_rq when pushing a task
  stop_machine: Disable preemption after queueing stopper threads
  sched/topology: Check variable group before dereferencing it

Pull perf fixes from Ingo Molnar:
 "Misc fixes:

   - AMD IBS data corruptor fix (uncovered by UBSAN)

   - an Intel PEBS entry unwind error fix

   - a HW-tracing crash fix

   - a MAINTAINERS update"

* 'perf-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  perf/core: Fix crash when using HW tracing kernel filters
  perf/x86/intel: Fix unwind errors from PEBS entries (mk-II)
  MAINTAINERS: Add Naveen N. Rao as kprobes co-maintainer
  perf/x86/amd/ibs: Don't access non-started event

Pull locking fixes from Ingo Molnar:
 "A paravirt UP-patching fix, and an I2C MUX driver lockdep warning fix"

* 'locking-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  locking/pvqspinlock/x86: Use LOCK_PREFIX in __pv_queued_spin_unlock() assembly code
  i2c/mux, locking/core: Annotate the nested rt_mutex usage
  locking/rtmutex: Allow specifying a subclass for nested locking

Pull EFI fix from Ingo Molnar:
 "An UEFI variables fix for SEV guests"

* 'efi-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  x86/efi: Access EFI MMIO data as unencrypted when SEV is active

Since commit d4ead6b3 ("net/ipv6: move metrics from dst to
rt6_info"), ipv6 metrics are shared and refcounted. rt6_set_from()
assigns the rt->from pointer and increases the refcount on from's
metrics. This reference is never released.

Introduce the fib6_metrics_release() helper and use it to release the
metrics.

Fixes: d4ead6b3 ("net/ipv6: move metrics from dst to rt6_info")
Signed-off-by: NSabrina Dubroca <sd@queasysnail.net>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

When loading module manually, after call xenbus_switch_state to initializes
the state of the netfront device, the driver state did not change so fast
that may lead no dev created in latest kernel. This patch adds wait to make
sure xenbus knows the driver is not in closed/unknown state.

Current state:
[vm]# ethtool eth0
Settings for eth0:
	Link detected: yes
[vm]# modprobe -r xen_netfront
[vm]# modprobe  xen_netfront
[vm]# ethtool eth0
Settings for eth0:
Cannot get device settings: No such device
Cannot get wake-on-lan settings: No such device
Cannot get message level: No such device
Cannot get link status: No such device
No data available

With the patch installed.
[vm]# ethtool eth0
Settings for eth0:
	Link detected: yes
[vm]# modprobe -r xen_netfront
[vm]# modprobe xen_netfront
[vm]# ethtool eth0
Settings for eth0:
	Link detected: yes
Signed-off-by: NXiao Liang <xiliang@redhat.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Kernel panic when with high memory pressure, calltrace looks like,

PID: 21439 TASK: ffff881be3afedd0 CPU: 16 COMMAND: "java"
 #0 [ffff881ec7ed7630] machine_kexec at ffffffff81059beb
 #1 [ffff881ec7ed7690] __crash_kexec at ffffffff81105942
 #2 [ffff881ec7ed7760] crash_kexec at ffffffff81105a30
 #3 [ffff881ec7ed7778] oops_end at ffffffff816902c8
 #4 [ffff881ec7ed77a0] no_context at ffffffff8167ff46
 #5 [ffff881ec7ed77f0] __bad_area_nosemaphore at ffffffff8167ffdc
 #6 [ffff881ec7ed7838] __node_set at ffffffff81680300
 #7 [ffff881ec7ed7860] __do_page_fault at ffffffff8169320f
 #8 [ffff881ec7ed78c0] do_page_fault at ffffffff816932b5
 #9 [ffff881ec7ed78f0] page_fault at ffffffff8168f4c8
    [exception RIP: _raw_spin_lock_irqsave+47]
    RIP: ffffffff8168edef RSP: ffff881ec7ed79a8 RFLAGS: 00010046
    RAX: 0000000000000246 RBX: ffffea0019740d00 RCX: ffff881ec7ed7fd8
    RDX: 0000000000020000 RSI: 0000000000000016 RDI: 0000000000000008
    RBP: ffff881ec7ed79a8 R8: 0000000000000246 R9: 000000000001a098
    R10: ffff88107ffda000 R11: 0000000000000000 R12: 0000000000000000
    R13: 0000000000000008 R14: ffff881ec7ed7a80 R15: ffff881be3afedd0
    ORIG_RAX: ffffffffffffffff CS: 0010 SS: 0018

It happens in the pagefault and results in double pagefault
during compacting pages when memory allocation fails.

Analysed the vmcore, the page leads to second pagefault is corrupted
with _mapcount=-256, but private=0.

It's caused by the race between migration and ballooning, and lock
missing in virtballoon_migratepage() of virtio_balloon driver.
This patch fix the bug.

Fixes: e2250429 ("virtio_balloon: introduce migration primitives to balloon pages")
Cc: stable@vger.kernel.org
Signed-off-by: NJiang Biao <jiang.biao2@zte.com.cn>
Signed-off-by: NHuang Chong <huang.chong@zte.com.cn>
Signed-off-by: NMichael S. Tsirkin <mst@redhat.com>

ems_usb_probe() allocates memory for dev->tx_msg_buffer, but there
is no its deallocation in ems_usb_disconnect().

Found by Linux Driver Verification project (linuxtesting.org).
Signed-off-by: NAnton Vasilyev <vasilyev@ispras.ru>
Cc: <stable@vger.kernel.org>
Signed-off-by: NMarc Kleine-Budde <mkl@pengutronix.de>

The meter code would create an entry for each new meter.  However, it
would not set the meter id in the new entry, so every meter would appear
to have a meter id of zero.  This commit properly sets the meter id when
adding the entry.

Fixes: 96fbc13d ("openvswitch: Add meter infrastructure")
Signed-off-by: NJustin Pettit <jpettit@ovn.org>
Cc: Andy Zhou <azhou@ovn.org>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Pull ext4 fixes from Ted Ts'o:
 "Some miscellaneous ext4 fixes for 4.18; one fix is for a regression
  introduced in 4.18-rc4.

  Sorry for the late-breaking pull. I was originally going to wait for
  the next merge window, but Eric Whitney found a regression introduced
  in 4.18-rc4, so I decided to push out the regression plus the other
  fixes now. (The other commits have been baking in linux-next since
  early July)"

* tag 'ext4_for_linus_stable' of git://git.kernel.org/pub/scm/linux/kernel/git/tytso/ext4:
  ext4: fix check to prevent initializing reserved inodes
  ext4: check for allocation block validity with block group locked
  ext4: fix inline data updates with checksums enabled
  ext4: clear mmp sequence number when remounting read-only
  ext4: fix false negatives *and* false positives in ext4_check_descriptors()