- 08 6月, 2010 1 次提交
-
-
由 Jeremy Fitzhardinge 提交于
In a Xen domain, ioremap operates on machine addresses, not pseudo-physical addresses. We use _PAGE_IOMAP to determine whether a mapping is intended for machine addresses. [ Impact: allow Xen domain to map real hardware ] Signed-off-by: NJeremy Fitzhardinge <jeremy.fitzhardinge@citrix.com> Signed-off-by: NKonrad Rzeszutek Wilk <konrad.wilk@oracle.com>
-
- 30 3月, 2010 1 次提交
-
-
由 Tejun Heo 提交于
include cleanup: Update gfp.h and slab.h includes to prepare for breaking implicit slab.h inclusion from percpu.h percpu.h is included by sched.h and module.h and thus ends up being included when building most .c files. percpu.h includes slab.h which in turn includes gfp.h making everything defined by the two files universally available and complicating inclusion dependencies. percpu.h -> slab.h dependency is about to be removed. Prepare for this change by updating users of gfp and slab facilities include those headers directly instead of assuming availability. As this conversion needs to touch large number of source files, the following script is used as the basis of conversion. http://userweb.kernel.org/~tj/misc/slabh-sweep.py The script does the followings. * Scan files for gfp and slab usages and update includes such that only the necessary includes are there. ie. if only gfp is used, gfp.h, if slab is used, slab.h. * When the script inserts a new include, it looks at the include blocks and try to put the new include such that its order conforms to its surrounding. It's put in the include block which contains core kernel includes, in the same order that the rest are ordered - alphabetical, Christmas tree, rev-Xmas-tree or at the end if there doesn't seem to be any matching order. * If the script can't find a place to put a new include (mostly because the file doesn't have fitting include block), it prints out an error message indicating which .h file needs to be added to the file. The conversion was done in the following steps. 1. The initial automatic conversion of all .c files updated slightly over 4000 files, deleting around 700 includes and adding ~480 gfp.h and ~3000 slab.h inclusions. The script emitted errors for ~400 files. 2. Each error was manually checked. Some didn't need the inclusion, some needed manual addition while adding it to implementation .h or embedding .c file was more appropriate for others. This step added inclusions to around 150 files. 3. The script was run again and the output was compared to the edits from #2 to make sure no file was left behind. 4. Several build tests were done and a couple of problems were fixed. e.g. lib/decompress_*.c used malloc/free() wrappers around slab APIs requiring slab.h to be added manually. 5. The script was run on all .h files but without automatically editing them as sprinkling gfp.h and slab.h inclusions around .h files could easily lead to inclusion dependency hell. Most gfp.h inclusion directives were ignored as stuff from gfp.h was usually wildly available and often used in preprocessor macros. Each slab.h inclusion directive was examined and added manually as necessary. 6. percpu.h was updated not to include slab.h. 7. Build test were done on the following configurations and failures were fixed. CONFIG_GCOV_KERNEL was turned off for all tests (as my distributed build env didn't work with gcov compiles) and a few more options had to be turned off depending on archs to make things build (like ipr on powerpc/64 which failed due to missing writeq). * x86 and x86_64 UP and SMP allmodconfig and a custom test config. * powerpc and powerpc64 SMP allmodconfig * sparc and sparc64 SMP allmodconfig * ia64 SMP allmodconfig * s390 SMP allmodconfig * alpha SMP allmodconfig * um on x86_64 SMP allmodconfig 8. percpu.h modifications were reverted so that it could be applied as a separate patch and serve as bisection point. Given the fact that I had only a couple of failures from tests on step 6, I'm fairly confident about the coverage of this conversion patch. If there is a breakage, it's likely to be something in one of the arch headers which should be easily discoverable easily on most builds of the specific arch. Signed-off-by: NTejun Heo <tj@kernel.org> Guess-its-ok-by: NChristoph Lameter <cl@linux-foundation.org> Cc: Ingo Molnar <mingo@redhat.com> Cc: Lee Schermerhorn <Lee.Schermerhorn@hp.com>
-
- 28 2月, 2010 2 次提交
-
-
由 Ian Campbell 提交于
Now that both Xen and VMI disable allocations of PTE pages from high memory this paravirt op serves no further purpose. This effectively reverts ce6234b5 "add kmap_atomic_pte for mapping highpte pages". Signed-off-by: NIan Campbell <ian.campbell@citrix.com> LKML-Reference: <1267204562-11844-3-git-send-email-ian.campbell@citrix.com> Acked-by: NAlok Kataria <akataria@vmware.com> Cc: Jeremy Fitzhardinge <jeremy@goop.org> Cc: Ingo Molnar <mingo@elte.hu> Signed-off-by: NH. Peter Anvin <hpa@zytor.com>
-
由 Ian Campbell 提交于
There's a path in the pagefault code where the kernel deliberately breaks its own locking rules by kmapping a high pte page without holding the pagetable lock (in at least page_check_address). This breaks Xen's ability to track the pinned/unpinned state of the page. There does not appear to be a viable workaround for this behaviour so simply disable HIGHPTE for all Xen guests. Signed-off-by: NIan Campbell <ian.campbell@citrix.com> LKML-Reference: <1267204562-11844-1-git-send-email-ian.campbell@citrix.com> Cc: Jeremy Fitzhardinge <jeremy@goop.org> Cc: Ingo Molnar <mingo@elte.hu> Cc: Pasi Kärkkäinen <pasik@iki.fi> Cc: <stable@kernel.org> # .32.x: 14315592: Allow highmem user page tables to be disabled at boot time Cc: <stable@kernel.org> # .32.x Cc: <xen-devel@lists.xensource.com> Signed-off-by: NH. Peter Anvin <hpa@zytor.com>
-
- 04 12月, 2009 1 次提交
-
-
由 Ian Campbell 提交于
pvops kernels >= 2.6.30 can currently only be saved and restored once. The second attempt to save results in: ERROR Internal error: Frame# in pfn-to-mfn frame list is not in pseudophys ERROR Internal error: entry 0: p2m_frame_list[0] is 0xf2c2c2c2, max 0x120000 ERROR Internal error: Failed to map/save the p2m frame list I finally narrowed it down to: commit cdaead6b Author: Jeremy Fitzhardinge <jeremy.fitzhardinge@citrix.com> Date: Fri Feb 27 15:34:59 2009 -0800 xen: split construction of p2m mfn tables from registration Build the p2m_mfn_list_list early with the rest of the p2m table, but register it later when the real shared_info structure is in place. Signed-off-by: NJeremy Fitzhardinge <jeremy.fitzhardinge@citrix.com> The unforeseen side-effect of this change was to cause the mfn list list to not be rebuilt on resume. Prior to this change it would have been rebuilt via xen_post_suspend() -> xen_setup_shared_info() -> xen_setup_mfn_list_list(). Fix by explicitly calling xen_build_mfn_list_list() from xen_post_suspend(). Signed-off-by: NIan Campbell <ian.campbell@citrix.com> Signed-off-by: NJeremy Fitzhardinge <jeremy.fitzhardinge@citrix.com> Cc: Stable Kernel <stable@kernel.org>
-
- 24 9月, 2009 1 次提交
-
-
由 Rusty Russell 提交于
Makes code futureproof against the impending change to mm->cpu_vm_mask (to be a pointer). It's also a chance to use the new cpumask_ ops which take a pointer (the older ones are deprecated, but there's no hurry for arch code). Signed-off-by: NRusty Russell <rusty@rustcorp.com.au>
-
- 31 8月, 2009 2 次提交
-
-
由 Thomas Gleixner 提交于
We really do not need two paravirt/x86_init_ops functions which are called in two consecutive source lines. Move the only user of post_allocator_init into the already existing pagetable_setup_done function. Signed-off-by: NThomas Gleixner <tglx@linutronix.de>
-
由 Thomas Gleixner 提交于
Replace more paravirt hackery by proper x86_init_ops. Signed-off-by: NThomas Gleixner <tglx@linutronix.de>
-
- 13 5月, 2009 1 次提交
-
-
由 Randy Dunlap 提交于
mmu.c needs to #include module.h to prevent these warnings: arch/x86/xen/mmu.c:239: warning: data definition has no type or storage class arch/x86/xen/mmu.c:239: warning: type defaults to 'int' in declaration of 'EXPORT_SYMBOL_GPL' arch/x86/xen/mmu.c:239: warning: parameter names (without types) in function declaration [ Impact: cleanup ] Signed-off-by: NRandy Dunlap <randy.dunlap@oracle.com> Acked-by: NJeremy Fitzhardinge <jeremy.fitzhardinge@citrix.com> Signed-off-by: NAndrew Morton <akpm@linux-foundation.org> LKML-Reference: <new-submission> Signed-off-by: NIngo Molnar <mingo@elte.hu>
-
- 08 5月, 2009 1 次提交
-
-
由 Jeremy Fitzhardinge 提交于
The Xen pagetables are no longer implicitly reserved as part of the other i386_start_kernel reservations, so make sure we explicitly reserve them. This prevents them from being released into the general kernel free page pool and reused. [ Impact: fix Xen guest crash ] Also-Bisected-by: NBryan Donlan <bdonlan@gmail.com> Signed-off-by: NJeremy Fitzhardinge <jeremy.fitzhardinge@citrix.com> Cc: Xen-devel <xen-devel@lists.xensource.com> Cc: Linus Torvalds <torvalds@linux-foundation.org> LKML-Reference: <4A032EEC.30509@goop.org> Signed-off-by: NIngo Molnar <mingo@elte.hu>
-
- 11 4月, 2009 1 次提交
-
-
由 Masami Hiramatsu 提交于
Impact: fix kprobes crash on 32-bit with RAM above 4G Use phys_addr_t for receiving a physical address argument instead of unsigned long. This allows fixmap to handle pages higher than 4GB on x86-32. Signed-off-by: NMasami Hiramatsu <mhiramat@redhat.com> Acked-by: NMathieu Desnoyers <mathieu.desnoyers@polymtl.ca> Cc: Andrew Morton <akpm@linux-foundation.org> Cc: Ananth N Mavinakayanahalli <ananth@in.ibm.com> Cc: systemtap-ml <systemtap@sources.redhat.com> Cc: Gary Hade <garyhade@us.ibm.com> Cc: Linus Torvalds <torvalds@linux-foundation.org> LKML-Reference: <49DE3695.6040800@redhat.com> Signed-off-by: NIngo Molnar <mingo@elte.hu>
-
- 10 4月, 2009 2 次提交
-
-
由 Masami Hiramatsu 提交于
Use phys_addr_t for receiving a physical address argument instead of unsigned long. This allows fixmap to handle pages higher than 4GB on x86-32. Signed-off-by: NMasami Hiramatsu <mhiramat@redhat.com> Cc: Ingo Molnar <mingo@elte.hu> Acked-by: NMathieu Desnoyers <mathieu.desnoyers@polymtl.ca> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
由 Jeremy Fitzhardinge 提交于
FIX_TEXT_POKE[01] are used to map kernel addresses, so they're mapping pfns, not mfns. Signed-off-by: NJeremy Fitzhardinge <jeremy.fitzhardinge@citrix.com>
-
- 09 4月, 2009 6 次提交
-
-
由 Jeremy Fitzhardinge 提交于
FIX_TEXT_POKE[01] are used to map kernel addresses, so they're mapping pfns, not mfns. Signed-off-by: NJeremy Fitzhardinge <jeremy.fitzhardinge@citrix.com>
-
由 Jeremy Fitzhardinge 提交于
Impact: fixes crashing bug There's no particular problem with getting an empty cpu mask, so just shortcut-return if we get one. Avoids crash reported by Christophe Saout <christophe@saout.de> Signed-off-by: NJeremy Fitzhardinge <jeremy.fitzhardinge@citrix.com>
-
由 Jeremy Fitzhardinge 提交于
1. make sure early-allocated ptes are pinned, so they can be later unpinned 2. don't pin pmd+pud, just make them RO 3. scatter some __inits around Signed-off-by: NJeremy Fitzhardinge <jeremy.fitzhardinge@citrix.com>
-
由 Jeremy Fitzhardinge 提交于
Build the p2m_mfn_list_list early with the rest of the p2m table, but register it later when the real shared_info structure is in place. Signed-off-by: NJeremy Fitzhardinge <jeremy.fitzhardinge@citrix.com>
-
由 Jeremy Fitzhardinge 提交于
When doing very early p2m setting, we need to separate setting from allocation, so split things up accordingly. Signed-off-by: NJeremy Fitzhardinge <jeremy.fitzhardinge@citrix.com>
-
由 Jeremy Fitzhardinge 提交于
xen_mc_flush() requires preemption to be disabled for its own sanity, so disable it while we're flushing. Signed-off-by: NJeremy Fitzhardinge <jeremy.fitzhardinge@citrix.com>
-
- 31 3月, 2009 3 次提交
-
-
由 Jeremy Fitzhardinge 提交于
Impact: fixes crashing bug There's no particular problem with getting an empty cpu mask, so just shortcut-return if we get one. Avoids crash reported by Christophe Saout <christophe@saout.de> Signed-off-by: NJeremy Fitzhardinge <jeremy.fitzhardinge@citrix.com>
-
由 Jeremy Fitzhardinge 提交于
1. make sure early-allocated ptes are pinned, so they can be later unpinned 2. don't pin pmd+pud, just make them RO 3. scatter some __inits around Signed-off-by: NJeremy Fitzhardinge <jeremy.fitzhardinge@citrix.com>
-
由 Jeremy Fitzhardinge 提交于
Build the p2m_mfn_list_list early with the rest of the p2m table, but register it later when the real shared_info structure is in place. Signed-off-by: NJeremy Fitzhardinge <jeremy.fitzhardinge@citrix.com>
-
- 30 3月, 2009 5 次提交
-
-
由 Jeremy Fitzhardinge 提交于
When doing very early p2m setting, we need to separate setting from allocation, so split things up accordingly. Signed-off-by: NJeremy Fitzhardinge <jeremy.fitzhardinge@citrix.com>
-
由 Jeremy Fitzhardinge 提交于
xen_mc_flush() requires preemption to be disabled for its own sanity, so disable it while we're flushing. Signed-off-by: NJeremy Fitzhardinge <jeremy.fitzhardinge@citrix.com>
-
由 Jeremy Fitzhardinge 提交于
Impact: remove obsolete checks, simplification Lift restrictions on preemption with lazy mmu mode, as it is now allowed. Signed-off-by: NJeremy Fitzhardinge <jeremy.fitzhardinge@citrix.com> Acked-by: NPeter Zijlstra <a.p.zijlstra@chello.nl>
-
由 Jeremy Fitzhardinge 提交于
Impact: allow preemption during lazy mmu updates If we're in lazy mmu mode when context switching, leave lazy mmu mode, but remember the task's state in TIF_LAZY_MMU_UPDATES. When we resume the task, check this flag and re-enter lazy mmu mode if its set. This sets things up for allowing lazy mmu mode while preemptible, though that won't actually be active until the next change. Signed-off-by: NJeremy Fitzhardinge <jeremy.fitzhardinge@citrix.com> Acked-by: NPeter Zijlstra <a.p.zijlstra@chello.nl>
-
由 Jeremy Fitzhardinge 提交于
Impact: simplification, prepare for later changes Make lazy cpu mode more specific to context switching, so that it makes sense to do more context-switch specific things in the callbacks. Signed-off-by: NJeremy Fitzhardinge <jeremy.fitzhardinge@citrix.com> Acked-by: NPeter Zijlstra <a.p.zijlstra@chello.nl>
-
- 19 3月, 2009 1 次提交
-
-
由 Jeremy Fitzhardinge 提交于
Impact: cleanup set_pte_present() is no longer used, directly or indirectly, so remove it. Signed-off-by: NJeremy Fitzhardinge <jeremy.fitzhardinge@citrix.com> Cc: Xen-devel <xen-devel@lists.xensource.com> Cc: Jeremy Fitzhardinge <jeremy.fitzhardinge@citrix.com> Cc: Alok Kataria <akataria@vmware.com> Cc: Marcelo Tosatti <mtosatti@redhat.com> Cc: Avi Kivity <avi@redhat.com> LKML-Reference: <1237406613-2929-2-git-send-email-jeremy@goop.org> Signed-off-by: NIngo Molnar <mingo@elte.hu>
-
- 15 3月, 2009 1 次提交
-
-
由 Jeremy Fitzhardinge 提交于
Impact: new interface Add a brk()-like allocator which effectively extends the bss in order to allow very early code to do dynamic allocations. This is better than using statically allocated arrays for data in subsystems which may never get used. The space for brk allocations is in the bss ELF segment, so that the space is mapped properly by the code which maps the kernel, and so that bootloaders keep the space free rather than putting a ramdisk or something into it. The bss itself, delimited by __bss_stop, ends before the brk area (__brk_base to __brk_limit). The kernel text, data and bss is reserved up to __bss_stop. Any brk-allocated data is reserved separately just before the kernel pagetable is built, as that code allocates from unreserved spaces in the e820 map, potentially allocating from any unused brk memory. Ultimately any unused memory in the brk area is used in the general kernel memory pool. Initially the brk space is set to 1MB, which is probably much larger than any user needs (the largest current user is i386 head_32.S's code to build the pagetables to map the kernel, which can get fairly large with a big kernel image and no PSE support). So long as the system has sufficient memory for the bootloader to reserve the kernel+1MB brk, there are no bad effects resulting from an over-large brk. Signed-off-by: NJeremy Fitzhardinge <jeremy.fitzhardinge@citrix.com> Signed-off-by: NH. Peter Anvin <hpa@zytor.com>
-
- 02 3月, 2009 1 次提交
-
-
由 Jeremy Fitzhardinge 提交于
The virtually mapped percpu space causes us two problems: - for hypercalls which take an mfn, we need to do a full pagetable walk to convert the percpu va into an mfn, and - when a hypercall requires a page to be mapped RO via all its aliases, we need to make sure its RO in both the percpu mapping and in the linear mapping This primarily affects the gdt and the vcpu info structure. Signed-off-by: NJeremy Fitzhardinge <jeremy.fitzhardinge@citrix.com> Cc: Xen-devel <xen-devel@lists.xensource.com> Cc: Gerd Hoffmann <kraxel@redhat.com> Cc: Rusty Russell <rusty@rustcorp.com.au> Cc: Tejun Heo <htejun@gmail.com> Signed-off-by: NIngo Molnar <mingo@elte.hu>
-
- 13 2月, 2009 1 次提交
-
-
由 Ian Campbell 提交于
The commit commit 4595f962 Author: Rusty Russell <rusty@rustcorp.com.au> Date: Sat Jan 10 21:58:09 2009 -0800 x86: change flush_tlb_others to take a const struct cpumask causes xen_flush_tlb_others to allocate a multicall and then issue it without initializing it in the case where the cpumask is empty, leading to: [ 8.354898] 1 multicall(s) failed: cpu 1 [ 8.354921] Pid: 2213, comm: bootclean Not tainted 2.6.29-rc3-x86_32p-xenU-tip #135 [ 8.354937] Call Trace: [ 8.354955] [<c01036e3>] xen_mc_flush+0x133/0x1b0 [ 8.354971] [<c0105d2a>] ? xen_force_evtchn_callback+0x1a/0x30 [ 8.354988] [<c0105a60>] xen_flush_tlb_others+0xb0/0xd0 [ 8.355003] [<c0126643>] flush_tlb_page+0x53/0xa0 [ 8.355018] [<c0176a80>] do_wp_page+0x2a0/0x7c0 [ 8.355034] [<c0238f0a>] ? notify_remote_via_irq+0x3a/0x70 [ 8.355049] [<c0178950>] handle_mm_fault+0x7b0/0xa50 [ 8.355065] [<c0131a3e>] ? wake_up_new_task+0x8e/0xb0 [ 8.355079] [<c01337b5>] ? do_fork+0xe5/0x320 [ 8.355095] [<c0121919>] do_page_fault+0xe9/0x240 [ 8.355109] [<c0121830>] ? do_page_fault+0x0/0x240 [ 8.355125] [<c032457a>] error_code+0x72/0x78 [ 8.355139] call 1/1: op=2863311530 arg=[aaaaaaaa] result=-38 xen_flush_tlb_others+0x41/0xd0 Since empty cpumasks are rare and undoing an xen_mc_entry() is tricky just issue such requests normally. Signed-off-by: NIan Campbell <ian.campbell@citrix.com> Signed-off-by: NIngo Molnar <mingo@elte.hu>
-
- 05 2月, 2009 1 次提交
-
-
由 Jeremy Fitzhardinge 提交于
Moving the mmu code from enlighten.c to mmu.c inadvertently broke the 32-bit build. Fix it. Signed-off-by: NJeremy Fitzhardinge <jeremy.fitzhardinge@citrix.com> Signed-off-by: NH. Peter Anvin <hpa@linux.intel.com>
-
- 31 1月, 2009 2 次提交
-
-
由 Jeremy Fitzhardinge 提交于
Impact: Optimization In the native case, pte_val, make_pte, etc are all just identity functions, so there's no need to clobber a lot of registers over them. (This changes the 32-bit callee-save calling convention to return both EAX and EDX so functions can return 64-bit values.) Signed-off-by: NJeremy Fitzhardinge <jeremy.fitzhardinge@citrix.com> Signed-off-by: NH. Peter Anvin <hpa@zytor.com>
-
由 Jeremy Fitzhardinge 提交于
Impact: Cleanup Move remaining mmu-related stuff into mmu.c. A general cleanup, and lay the groundwork for later patches. Signed-off-by: NJeremy Fitzhardinge <jeremy.fitzhardinge@citrix.com> Signed-off-by: NH. Peter Anvin <hpa@zytor.com>
-
- 18 1月, 2009 1 次提交
-
-
由 Brian Gerst 提交于
Signed-off-by: NBrian Gerst <brgerst@gmail.com> Signed-off-by: NTejun Heo <tj@kernel.org>
-
- 16 1月, 2009 1 次提交
-
-
由 Ingo Molnar 提交于
It is an optimization and a cleanup, and adds the following new generic percpu methods: percpu_read() percpu_write() percpu_add() percpu_sub() percpu_and() percpu_or() percpu_xor() and implements support for them on x86. (other architectures will fall back to a default implementation) The advantage is that for example to read a local percpu variable, instead of this sequence: return __get_cpu_var(var); ffffffff8102ca2b: 48 8b 14 fd 80 09 74 mov -0x7e8bf680(,%rdi,8),%rdx ffffffff8102ca32: 81 ffffffff8102ca33: 48 c7 c0 d8 59 00 00 mov $0x59d8,%rax ffffffff8102ca3a: 48 8b 04 10 mov (%rax,%rdx,1),%rax We can get a single instruction by using the optimized variants: return percpu_read(var); ffffffff8102ca3f: 65 48 8b 05 91 8f fd mov %gs:0x7efd8f91(%rip),%rax I also cleaned up the x86-specific APIs and made the x86 code use these new generic percpu primitives. tj: * fixed generic percpu_sub() definition as Roel Kluin pointed out * added percpu_and() for completeness's sake * made generic percpu ops atomic against preemption Signed-off-by: NIngo Molnar <mingo@elte.hu> Signed-off-by: NTejun Heo <tj@kernel.org>
-
- 17 12月, 2008 2 次提交
-
-
由 Mike Travis 提交于
Impact: use new API, remove cpumask from stack. Change smp_call_function_mask() callers to smp_call_function_many(). This removes a cpumask from the stack, and falls back should allocating the cpumask var fail (only possible with CONFIG_CPUMASKS_OFFSTACK). Signed-off-by: NRusty Russell <rusty@rustcorp.com.au> Signed-off-by: NMike Travis <travis@sgi.com> Cc: jeremy@xensource.com
-
由 Tej 提交于
Impact: cleanup Signed-off-by: NTej <bewith.tej@gmail.com> Signed-off-by: NJeremy Fitzhardinge <jeremy.fitzhardinge@citrix.com> Signed-off-by: NIngo Molnar <mingo@elte.hu>
-
- 23 11月, 2008 1 次提交
-
-
由 Ian Campbell 提交于
Impact: fix Xen guest boot failure commit eefb47f6 ("xen: use spin_lock_nest_lock when pinning a pagetable") changed xen_pgd_walk to walk over mm->pgd rather than taking pgd as an argument. This breaks xen_mm_(un)pin_all() because it makes init_mm.pgd readonly instead of the pgd we are interested in and therefore the pin subsequently fails. (XEN) mm.c:2280:d15 Bad type (saw 00000000e8000001 != exp 0000000060000000) for mfn bc464 (pfn 21ca7) (XEN) mm.c:2665:d15 Error while pinning mfn bc464 [ 14.586913] 1 multicall(s) failed: cpu 0 [ 14.586926] Pid: 14, comm: kstop/0 Not tainted 2.6.28-rc5-x86_32p-xenU-00172-gee2f6cc7 #200 [ 14.586940] Call Trace: [ 14.586955] [<c030c17a>] ? printk+0x18/0x1e [ 14.586972] [<c0103df3>] xen_mc_flush+0x163/0x1d0 [ 14.586986] [<c0104bc1>] __xen_pgd_pin+0xa1/0x110 [ 14.587000] [<c015a330>] ? stop_cpu+0x0/0xf0 [ 14.587015] [<c0104d7b>] xen_mm_pin_all+0x4b/0x70 [ 14.587029] [<c022bcb9>] xen_suspend+0x39/0xe0 [ 14.587042] [<c015a330>] ? stop_cpu+0x0/0xf0 [ 14.587054] [<c015a3cd>] stop_cpu+0x9d/0xf0 [ 14.587067] [<c01417cd>] run_workqueue+0x8d/0x150 [ 14.587080] [<c030e4b3>] ? _spin_unlock_irqrestore+0x23/0x40 [ 14.587094] [<c014558a>] ? prepare_to_wait+0x3a/0x70 [ 14.587107] [<c0141918>] worker_thread+0x88/0xf0 [ 14.587120] [<c01453c0>] ? autoremove_wake_function+0x0/0x50 [ 14.587133] [<c0141890>] ? worker_thread+0x0/0xf0 [ 14.587146] [<c014509c>] kthread+0x3c/0x70 [ 14.587157] [<c0145060>] ? kthread+0x0/0x70 [ 14.587170] [<c0109d1b>] kernel_thread_helper+0x7/0x10 [ 14.587181] call 1/3: op=14 arg=[c0415000] result=0 [ 14.587192] call 2/3: op=14 arg=[e1ca2000] result=0 [ 14.587204] call 3/3: op=26 arg=[c1808860] result=-22 Signed-off-by: NIan Campbell <ian.campbell@citrix.com> Acked-by: NJeremy Fitzhardinge <jeremy.fitzhardinge@citrix.com> Signed-off-by: NIngo Molnar <mingo@elte.hu>
-
- 07 11月, 2008 1 次提交
-
-
由 Jeremy Fitzhardinge 提交于
Xen requires that all mappings of pagetable pages are read-only, so that they can't be updated illegally. As a result, if a page is being turned into a pagetable page, we need to make sure all its mappings are RO. If the page had been used for ioremap or vmalloc, it may still have left over mappings as a result of not having been lazily unmapped. This change makes sure we explicitly mop them all up before pinning the page. Unlike aliases created by kmap, the there can be vmalloc aliases even for non-high pages, so we must do the flush unconditionally. Signed-off-by: NJeremy Fitzhardinge <jeremy.fitzhardinge@citrix.com> Cc: Linux Memory Management List <linux-mm@kvack.org> Cc: Nick Piggin <nickpiggin@yahoo.com.au> Signed-off-by: NIngo Molnar <mingo@elte.hu>
-