Commands like Write Zeros can change the contents of a namespaces without
actually transferring data.  To protect against this, check the Commands
Supported and Effects log is supported by the controller for any
unprivileg command passthrough and refuse unprivileged passthrough if the
command has any effects that can change data or metadata.

Note: While the Commands Support and Effects log page has only been
mandatory since NVMe 2.0, it is widely supported because Windows requires
it for any command passthrough from userspace.

Fixes: e4fbcf32 ("nvme: identify-namespace without CAP_SYS_ADMIN")
Signed-off-by: NChristoph Hellwig <hch@lst.de>
Reviewed-by: NKeith Busch <kbusch@kernel.org>
Reviewed-by: NSagi Grimberg <sagi@grimberg.me>
Reviewed-by: NKanchan Joshi <joshi.k@samsung.com>

3 << 16 does not generate the correct mask for bits 16, 17 and 18.
Use the GENMASK macro to generate the correct mask instead.

Fixes: 84fef62d ("nvme: check admin passthru command effects")
Signed-off-by: NChristoph Hellwig <hch@lst.de>
Reviewed-by: NKeith Busch <kbusch@kernel.org>
Reviewed-by: NSagi Grimberg <sagi@grimberg.me>
Reviewed-by: NKanchan Joshi <joshi.k@samsung.com>

While the specification allows devices to either deallocate data
or to actually write zeroes on any Write Zeroes command, many SSDs
only do the sensible thing and deallocate data when the DEAC bit
is specific.  Set it when it is supported and the caller doesn't
explicitly opt out of deallocation.
Signed-off-by: NChristoph Hellwig <hch@lst.de>
Reviewed-by: NKeith Busch <kbusch@kernel.org>
Reviewed-by: NChaitanya Kulkarni <kch@nvidia.com>
Reviewed-by: NMartin K. Petersen <martin.petersen@oracle.com>

Currently both io and admin commands are kept under a
coarse-granular CAP_SYS_ADMIN check, disregarding file mode completely.

$ ls -l /dev/ng*
crw-rw-rw- 1 root root 242, 0 Sep  9 19:20 /dev/ng0n1
crw------- 1 root root 242, 1 Sep  9 19:20 /dev/ng0n2

In the example above, ng0n1 appears as if it may allow unprivileged
read/write operation but it does not and behaves same as ng0n2.

This patch implements a shift from CAP_SYS_ADMIN to more fine-granular
control for io-commands.
If CAP_SYS_ADMIN is present, nothing else is checked as before.
Otherwise, following rules are in place
- any admin-cmd is not allowed
- vendor-specific and fabric commmand are not allowed
- io-commands that can write are allowed if matching FMODE_WRITE
permission is present
- io-commands that read are allowed

Add a helper nvme_cmd_allowed that implements above policy.
Change all the callers of CAP_SYS_ADMIN to go through nvme_cmd_allowed
for any decision making.
Since file open mode is counted for any approval/denial, change at
various places to keep file-mode information handy.
Signed-off-by: NKanchan Joshi <joshi.k@samsung.com>
Reviewed-by: NJens Axboe <axboe@kernel.dk>
Reviewed-by: NKeith Busch <kbusch@kernel.org>
Reviewed-by: NChaitanya Kulkarni <kch@nvidia.com>
Signed-off-by: NChristoph Hellwig <hch@lst.de>

Mark them as unsigned so that we don't need extra casts, and define
them relative to cdword0 instead of requiring extra shifts.
Signed-off-by: NChristoph Hellwig <hch@lst.de>
Reviewed-by: NSagi Grimberg <sagi@grimberg.me>
Reviewed-by: NHannes Reinecke <hare@suse.de>

Add new definitions for NVMe In-band authentication as defined in
the NVMe Base Specification v2.0.
Signed-off-by: NHannes Reinecke <hare@suse.de>
Reviewed-by: NSagi Grimberg <sagi@grimberg.me>
Reviewed-by: NHimanshu Madhani <himanshu.madhani@oracle.com>
Reviewed-by: NChaitanya Kulkarni <kch@nvidia.com>
Signed-off-by: NChristoph Hellwig <hch@lst.de>
Signed-off-by: NJens Axboe <axboe@kernel.dk>

In the NVM Express Revision 1.4 spec, Figure 145 describes possible
values for an AER with event type "Error" (value 000b). For a
Persistent Internal Error (value 03h), the host should perform a
controller reset.

Add support for this error using code that already exists for
doing a controller reset. As part of this support, introduce
two utility functions for parsing the AER type and subtype.

This new support was tested in a lab environment where we can
generate the persistent internal error on demand, and observe
both the Linux side and NVMe controller side to see that the
controller reset has been done.
Signed-off-by: NMichael Kelley <mikelley@microsoft.com>
Signed-off-by: NChristoph Hellwig <hch@lst.de>
Signed-off-by: NJens Axboe <axboe@kernel.dk>

This will allow the trace event to know the full size of the data
intended to be copied and silence read overflow checks.
Reported-by: NJohn Garry <john.garry@huawei.com>
Suggested-by: NChristoph Hellwig <hch@lst.de>
Signed-off-by: NKeith Busch <kbusch@kernel.org>
Signed-off-by: NChristoph Hellwig <hch@lst.de>

Adjust the values of NVME_CAP_CRMS_CRIMS and NVME_CAP_CRMS_CRWMS masks as
they are different from the ones in TP4084 - Time-to-ready.

Fixes: 354201c5 ("nvme: add support for TP4084 - Time-to-Ready Enhancements").
Signed-off-by: NJoel Granados <j.granados@samsung.com>
Reviewed-by: NKeith Busch <kbusch@kernel.org>
Reviewed-by: NSagi Grimberg <sagi@grimberg.me>
Reviewed-by: NChaitanya Kulkarni <kch@nvidia.com>
Signed-off-by: NChristoph Hellwig <hch@lst.de>

Add support for using longer timeouts during controller initialization
and letting the controller come up with namespaces that are not ready
for I/O yet.  We skip these not ready namespaces during scanning and
only bring them online once anoter scan is kicked off by the AEN that
is set when the NRDY bit gets set in the  I/O Command Set Independent
Identify Namespace Data Structure.   This asynchronous probing avoids
blocking the kernel boot when controllers take a very long time to
recover after unclean shutdowns (up to minutes).
Signed-off-by: NChristoph Hellwig <hch@lst.de>
Reviewed-by: NKeith Busch <kbusch@kernel.org>
Reviewed-by: NChaitanya Kulkarni <kch@nvidia.com>
Reviewed-by: NHannes Reinecke <hare@suse.de>

Instead of having one big enum add one for each register or field.
Signed-off-by: NChristoph Hellwig <hch@lst.de>
Reviewed-by: NKeith Busch <kbusch@kernel.org>
Reviewed-by: NChaitanya Kulkarni <kch@nvidia.com>

Log a few more path related status codes.
Signed-off-by: NMax Gurtovoy <mgurtovoy@nvidia.com>
Reviewed-by: NHannes Reinecke <hare@suse.de>
Signed-off-by: NChristoph Hellwig <hch@lst.de>

A NVMe subsystem with multiple controller can have private namespaces
that use the same NSID under some conditions:

 "If Namespace Management, ANA Reporting, or NVM Sets are supported, the
  NSIDs shall be unique within the NVM subsystem. If the Namespace
  Management, ANA Reporting, and NVM Sets are not supported, then NSIDs:
   a) for shared namespace shall be unique; and
   b) for private namespace are not required to be unique."

Reference: Section 6.1.6 NSID and Namespace Usage; NVM Express 1.4c spec.

Make sure this specific setup is supported in Linux.

Fixes: 9ad1927a ("nvme: always search for namespace head")
Signed-off-by: NSungup Moon <sungup.moon@samsung.com>
[hch: refactored and fixed the controller vs subsystem based naming
      conflict]
Signed-off-by: NChristoph Hellwig <hch@lst.de>
Reviewed-by: NSagi Grimberg <sagi@grimberg.me>

NVM Express ratified TP 4068 defines new protection information formats.
Implement support for the CRC64 guard tags.

Since the block layer doesn't support variable length reference tags,
driver support for the Storage Tag space is not supported at this time.

Cc: Hannes Reinecke <hare@suse.de>
Cc: "Martin K. Petersen" <martin.petersen@oracle.com>
Cc: Klaus Jensen <its@irrelevant.dk>
Signed-off-by: NKeith Busch <kbusch@kernel.org>
Reviewed-by: NMartin K. Petersen <martin.petersen@oracle.com>
Link: https://lore.kernel.org/r/20220303201312.3255347-9-kbusch@kernel.orgSigned-off-by: NJens Axboe <axboe@kernel.dk>

TP8010 introduces the Discovery Controller Type attribute (dctype).
The dctype is returned in the response to the Identify command. This
patch exposes the dctype through the sysfs. Since the dctype depends on
the Controller Type (cntrltype), another attribute of the Identify
response, the patch also exposes the cntrltype as well. The dctype will
only be displayed for discovery controllers.

A note about the naming of this attribute:
Although TP8010 calls this attribute the Discovery Controller Type,
note that the dctype is now part of the response to the Identify
command for all controller types. I/O, Discovery, and Admin controllers
all share the same Identify response PDU structure. Non-discovery
controllers as well as pre-TP8010 discovery controllers will continue
to set this field to 0 (which has always been the default for reserved
bytes). Per TP8010, the value 0 now means "Discovery controller type is
not reported" instead of "Reserved". One could argue that this
definition is correct even for non-discovery controllers, and by
extension, exposing it in the sysfs for non-discovery controllers is
appropriate.
Signed-off-by: NMartin Belanger <martin.belanger@dell.com>
Reviewed-by: NChaitanya Kulkarni <kch@nvidia.com>
Reviewed-by: NJohn Meneghini <jmeneghi@redhat.com>
Reviewed-by: NHannes Reinecke <hare@suse.de>
Signed-off-by: NChristoph Hellwig <hch@lst.de>

Improves logging of NVMe errors.  If NVME_VERBOSE_ERRORS is configured,
a verbose description of the error is logged, otherwise only status
codes/bits is logged.
Signed-off-by: NChaitanya Kulkarni <kch@nvidia.com>
[kch]: fix several nits, cosmetics, and trim down code.
Signed-off-by: NMartin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: NAlan Adamson <alan.adamson@oracle.com>
Reviewed-by: NHimanshu Madhani <himanshu.madhani@oracle.com>
Reviewed-by: NKeith Busch <kbusch@kernel.org>
Signed-off-by: NChristoph Hellwig <hch@lst.de>

TP8014 adds a new SUBTYPE value and a new field EFLAGS for the
discovery log page entry.
Signed-off-by: NHannes Reinecke <hare@suse.de>
Signed-off-by: NChristoph Hellwig <hch@lst.de>

This makes the code more readable.
Signed-off-by: NMax Gurtovoy <mgurtovoy@nvidia.com>
Reviewed-by: NChaitanya Kulkarni <kch@nvidia.com>
Signed-off-by: NChristoph Hellwig <hch@lst.de>

Update the 'identify controller' structure to define the newly added
CNTRLTYPE field.
Signed-off-by: NHannes Reinecke <hare@suse.de>
Reviewed-by: NChaitanya Kulkarni <kch@nvidia.com>
Reviewed-by: NHimanshu Madhani <himanshu.madhani@oracle.com>
Signed-off-by: NChristoph Hellwig <hch@lst.de>

Signed-off-by: NWesley Sheng <wesley.sheng@amd.com>
Signed-off-by: NChristoph Hellwig <hch@lst.de>

NVMe TP 4053 – Zoned Namespaces (ZNS) allows host software to
communicate with a non-volatile memory subsystem using zones for NVMe
protocol-based controllers. NVMeOF already support the ZNS NVMe
Protocol compliant devices on the target in the passthru mode. There
are generic zoned block devices like  Shingled Magnetic Recording (SMR)
HDDs that are not based on the NVMe protocol.

This patch adds ZNS backend support for non-ZNS zoned block devices as
NVMeOF targets.

This support includes implementing the new command set NVME_CSI_ZNS,
adding different command handlers for ZNS command set such as NVMe
Identify Controller, NVMe Identify Namespace, NVMe Zone Append,
NVMe Zone Management Send and NVMe Zone Management Receive.

With the new command set identifier, we also update the target command
effects logs to reflect the ZNS compliant commands.
Signed-off-by: NChaitanya Kulkarni <chaitanya.kulkarni@wdc.com>
Reviewed-by: NDamien Le Moal <damien.lemoal@wdc.com>
Signed-off-by: NChristoph Hellwig <hch@lst.de>

NVMe TP 4056 allows controllers to support different command sets.
NVMeoF target currently only supports namespaces that contain
traditional logical blocks that may be randomly read and written. In
some applications there is a value in exposing namespaces that contain
logical blocks that have special access rules (e.g. sequentially write
required namespace such as Zoned Namespace (ZNS)).

In order to support the Zoned Block Devices (ZBD) backend, controllers
need to have support for ZNS Command Set Identifier (CSI).

In this preparation patch, we adjust the code such that it can now
support the default command set identifier. We update the namespace data
structure to store the CSI value which defaults to NVME_CSI_NVM
that represents traditional logical blocks namespace type.

The CSI support is required to implement the ZBD backend for NVMeOF
with host side NVMe ZNS interface, since ZNS commands belong to
the different command set than the default one.
Signed-off-by: NChaitanya Kulkarni <chaitanya.kulkarni@wdc.com>
Signed-off-by: NChristoph Hellwig <hch@lst.de>

Commands that access LBA contents without a data transfer between the
host historically have not had a spec defined upper limit. The driver
set the queue constraints for such commands to the max data transfer
size just to be safe, but this artificial constraint frequently limits
devices below their capabilities.

The NVMe Workgroup ratified TP4040 defines how a controller may
advertise their non-MDTS limits. Use these if provided and default to
the current constraints if not. Since the Dataset Management command
limits are defined in logical blocks, but without a namespace to tell us
the logical block size, the code defaults to the safe 512b size.
Signed-off-by: NKeith Busch <kbusch@kernel.org>
Signed-off-by: NChristoph Hellwig <hch@lst.de>

When support for the NVMe ZNS commands was merged, tracing of these has
been omitted.

Add nvme_cmd_zone_mgmt_send, nvme_cmd_zone_mgmt_recv as well as
nvme_cmd_zone_append to the nvme driver's tracing facility.
Signed-off-by: NJohannes Thumshirn <johannes.thumshirn@wdc.com>
Signed-off-by: NChristoph Hellwig <hch@lst.de>

All the updates are mentioned in the ratified NVMe 1.4 spec.
Reviewed-by: NHannes Reinecke <hare@suse.de>
Signed-off-by: NMax Gurtovoy <mgurtovoy@nvidia.com>
Signed-off-by: NChristoph Hellwig <hch@lst.de>

Since NVMe v1.4 the Controller Memory Buffer must be explicitly enabled
by the host.
Signed-off-by: NKlaus Jensen <k.jensen@samsung.com>
[hch: avoid a local variable and add a comment]
Signed-off-by: NChristoph Hellwig <hch@lst.de>

Add passthru command handling capability for the NVMeOF target and
export passthru APIs which are used to integrate passthru
code with nvmet-core.

The new file passthru.c handles passthru cmd parsing and execution.
In the passthru mode, we create a block layer request from the nvmet
request and map the data on to the block layer request.

Admin commands and features are on an allow list as there are a number
of each that don't make too much sense with passthrough. We use an
allow list such that new commands can be considered before being blindly
passed through. In both cases, vendor specific commands are always
allowed.

We also reject reservation IO commands as the underlying device cannot
differentiate between multiple hosts behind a fabric.
Based-on-a-patch-by: NChaitanya Kulkarni <chaitanya.kulkarni@wdc.com>
Signed-off-by: NLogan Gunthorpe <logang@deltatee.com>
Reviewed-by: NKeith Busch <kbusch@kernel.org>
Reviewed-by: NSagi Grimberg <sagi@grimberg.me>
Signed-off-by: NChristoph Hellwig <hch@lst.de>

Add support for NVM Express Zoned Namespaces (ZNS) Command Set defined
in NVM Express TP4053. Zoned namespaces are discovered based on their
Command Set Identifier reported in the namespaces Namespace
Identification Descriptor list. A successfully discovered Zoned
Namespace will be registered with the block layer as a host managed
zoned block device with Zone Append command support. A namespace that
does not support append is not supported by the driver.
Reviewed-by: NMartin K. Petersen <martin.petersen@oracle.com>
Reviewed-by: NJohannes Thumshirn <johannes.thumshirn@wdc.com>
Reviewed-by: NHannes Reinecke <hare@suse.de>
Reviewed-by: NSagi Grimberg <sagi@grimberg.me>
Reviewed-by: NJavier González <javier.gonz@samsung.com>
Reviewed-by: NHimanshu Madhani <himanshu.madhani@oracle.com>
Signed-off-by: NHans Holmberg <hans.holmberg@wdc.com>
Signed-off-by: NDmitry Fomichev <dmitry.fomichev@wdc.com>
Signed-off-by: NAjay Joshi <ajay.joshi@wdc.com>
Signed-off-by: NAravind Ramesh <aravind.ramesh@wdc.com>
Signed-off-by: NNiklas Cassel <niklas.cassel@wdc.com>
Signed-off-by: NMatias Bjørling <matias.bjorling@wdc.com>
Signed-off-by: NDamien Le Moal <damien.lemoal@wdc.com>
Signed-off-by: NKeith Busch <keith.busch@wdc.com>
Signed-off-by: NChristoph Hellwig <hch@lst.de>

The Commands Supported and Effects log page was extended with a CSI
field that enables the host to query the log page for each command set
supported. Retrieve this log page for each command set that an attached
namespace supports, and save a pointer to that log in the namespace head.
Reviewed-by: NMatias Bjørling <matias.bjorling@wdc.com>
Reviewed-by: NJavier González <javier.gonz@samsung.com>
Reviewed-by: NHimanshu Madhani <himanshu.madhani@oracle.com>
Reviewed-by: NMartin K. Petersen <martin.petersen@oracle.com>
Reviewed-by: NHannes Reinecke <hare@suse.de>
Reviewed-by: NJohannes Thumshirn <johannes.thumshirn@wdc.com>
Reviewed-by: NDaniel Wagner <dwagner@suse.de>
Signed-off-by: NKeith Busch <keith.busch@wdc.com>
Signed-off-by: NChristoph Hellwig <hch@lst.de>

Implements support for multiple I/O Command Sets.  NVMe TP 4056
introduces a method to enumerate multiple command sets per namespace. If
the command set is exposed, this method for enumeration will be used
instead of the traditional method that uses the CC.CSS register command
set register for command set identification.

For namespaces where the Command Set Identifier is not supported or
recognized, the specific namespace will not be created.
Reviewed-by: NJavier González <javier.gonz@samsung.com>
Reviewed-by: NMartin K. Petersen <martin.petersen@oracle.com>
Reviewed-by: NJohannes Thumshirn <johannes.thumshirn@wdc.com>
Reviewed-by: NMatias Bjørling <matias.bjorling@wdc.com>
Reviewed-by: NDaniel Wagner <dwagner@suse.de>
Reviewed-by: NHimanshu Madhani <himanshu.madhani@oracle.com>
Reviewed-by: NHannes Reinecke <hare@suse.de>
Signed-off-by: NNiklas Cassel <niklas.cassel@wdc.com>
Signed-off-by: NChristoph Hellwig <hch@lst.de>

The enumerations will be used to expose the namespace metadata format by
the target.
Suggested-by: NChristoph Hellwig <hch@lst.de>
Signed-off-by: NIsrael Rukshin <israelr@mellanox.com>
Signed-off-by: NMax Gurtovoy <maxg@mellanox.com>
Reviewed-by: NJames Smart <james.smart@broadcom.com>
Reviewed-by: NMartin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: NChristoph Hellwig <hch@lst.de>

The current codebase makes use of the zero-length array language
extension to the C90 standard, but the preferred mechanism to declare
variable-length types such as these ones is a flexible array member[1][2],
introduced in C99:

struct foo {
        int stuff;
        struct boo array[];
};

By making use of the mechanism above, we will get a compiler warning
in case the flexible array does not occur last in the structure, which
will help us prevent some kind of undefined behavior bugs from being
inadvertently introduced[3] to the codebase from now on.

Also, notice that, dynamic memory allocations won't be affected by
this change:

"Flexible array members have incomplete type, and so the sizeof operator
may not be applied. As a quirk of the original implementation of
zero-length arrays, sizeof evaluates to zero."[1]

sizeof(flexible-array-member) triggers a warning because flexible array
members have incomplete type[1]. There are some instances of code in
which the sizeof operator is being incorrectly/erroneously applied to
zero-length arrays and the result is zero. Such instances may be hiding
some bugs. So, this work (flexible-array member conversions) will also
help to get completely rid of those sorts of issues.

This issue was found with the help of Coccinelle.

[1] https://gcc.gnu.org/onlinedocs/gcc/Zero-Length.html
[2] https://github.com/KSPP/linux/issues/21
[3] commit 76497732 ("cxgb3/l2t: Fix undefined behaviour")
Signed-off-by: NGustavo A. R. Silva <gustavoars@kernel.org>
Signed-off-by: NChristoph Hellwig <hch@lst.de>

Improve code readability by defining the specification's constants that
the driver is using when decoding identification payloads.
Signed-off-by: NKeith Busch <kbusch@kernel.org>
Reviewed-by: NBart van Assche <bvanassche@acm.org>
Reviewed-by: NChaitanya Kulkarni <chaitanya.kulkarni@wdc.com>
Acked-by: NSagi Grimberg <sagi@grimberg.me>
Signed-off-by: NChristoph Hellwig <hch@lst.de>
Signed-off-by: NJens Axboe <axboe@kernel.dk>

With reference to the NVMeOF Specification (page 44, Figure 38)
discovery log page entry provides address family field. We do set the
transport type field but the adrfam field is not set when using loop
transport and also it doesn't have support in the nvme-cli. So when
reading discovery log page with a loop transport it leads to confusing
output.

As per the spec for adrfam value 254 is reserved for Intra Host
Transport i.e. loopback), we add a required macro in the protocol
header file, set default port disc addr entry's adrfam to
NVMF_ADDR_FAMILY_MAX, and update nvmet_addr_family configfs array for
show/store attribute.

Without this patch, setting adrfam to (ipv4/ipv6/ib/fc/loop/" ") we get
following output for nvme discover command from nvme-cli which is
confusing.
trtype:  loop
adrfam:  ipv4
trtype:  loop
adrfam:  ipv6
trtype:  loop
adrfam:  infiniband
trtype:  loop
adrfam:  fibre-channel
trtype:  loop		# ${CFGFS_HOME}/nvmet/ports/1/addr_adrfam = loop
adrfam:  pci            # <----- pci for loop
trtype:  loop		# ${CFGFS_HOME}/nvmet/ports/1/addr_adrfam = " "
adrfam:  pci            # <----- pci for unrecognized

This patch fixes above output :-
trtype:  loop
adrfam:  ipv4
trtype:  loop
adrfam:  ipv6
trtype:  loop
adrfam:  infiniband
trtype:  loop
adrfam:  fibre-channel
trtype:  loop           # ${CFGFS_HOME}/nvmet/ports/1/addr_adrfam = loop
adrfam:  loop           # <----- loop for loop
trtype:  loop		# ${CFGFS_HOME}/config/nvmet/ports/adrfam = " "
adrfam:  unrecognized   # <----- unrecognized when invalid value
Signed-off-by: NChaitanya Kulkarni <chaitanya.kulkarni@wdc.com>
Signed-off-by: NChristoph Hellwig <hch@lst.de>
Signed-off-by: NJens Axboe <axboe@kernel.dk>

According to the NVMe specification, the over temperature threshold and
under temperature threshold features shall be implemented for Composite
Temperature if a non-zero WCTEMP field value is reported in the Identify
Controller data structure.  The features are also implemented for all
implemented temperature sensors (i.e., all Temperature Sensor fields that
report a non-zero value).

This provides the over temperature threshold and under temperature
threshold for each sensor as temperature min and max values of hwmon
sysfs attributes.

The WCTEMP is already provided as a temperature max value for Composite
Temperature, but this change isn't incompatible.  Because the default
value of the over temperature threshold for Composite Temperature is
the WCTEMP.

Now the alarm attribute for Composite Temperature indicates one of the
temperature is outside of a temperature threshold.  Because there is only
a single bit in Critical Warning field that indicates a temperature is
outside of a threshold.

Example output from the "sensors" command:

nvme-pci-0100
Adapter: PCI adapter
Composite:    +33.9°C  (low  = -273.1°C, high = +69.8°C)
                       (crit = +79.8°C)
Sensor 1:     +34.9°C  (low  = -273.1°C, high = +65261.8°C)
Sensor 2:     +31.9°C  (low  = -273.1°C, high = +65261.8°C)
Sensor 5:     +47.9°C  (low  = -273.1°C, high = +65261.8°C)

This also adds helper macros for kelvin from/to milli Celsius conversion,
and replaces the repeated code in hwmon.c.

Cc: Keith Busch <kbusch@kernel.org>
Cc: Jens Axboe <axboe@fb.com>
Cc: Christoph Hellwig <hch@lst.de>
Cc: Sagi Grimberg <sagi@grimberg.me>
Cc: Jean Delvare <jdelvare@suse.com>
Reviewed-by: NGuenter Roeck <linux@roeck-us.net>
Tested-by: NGuenter Roeck <linux@roeck-us.net>
Signed-off-by: NAkinobu Mita <akinobu.mita@gmail.com>
Signed-off-by: NKeith Busch <kbusch@kernel.org>

Update enumerations and structures in include/linux/nvme.h
to resync with the nvmecli.

All the updates are mentioned in the ratified NVMe 1.4 spec
https://nvmexpress.org/wp-content/uploads/NVM-Express-1_4-2019.06.10-Ratified.pdfReviewed-by: NChristoph Hellwig <hch@lst.de>
Signed-off-by: NRevanth Rajashekar <revanth.rajashekar@intel.com>
Signed-off-by: NKeith Busch <kbusch@kernel.org>
Signed-off-by: NJens Axboe <axboe@kernel.dk>

Fix the status code of canceled requests initiated by the host according
to TP4028 (Status Code 0x371):
"Command Aborted By host: The command was aborted as a result of host
action (e.g., the host disconnected the Fabric connection)."

Also in a multipath environment, unless otherwise specified, errors of
this type (path related) should be retried using a different path, if
one is available.
Signed-off-by: NMax Gurtovoy <maxg@mellanox.com>
Reviewed-by: NChristoph Hellwig <hch@lst.de>
Signed-off-by: NKeith Busch <kbusch@kernel.org>
Signed-off-by: NJens Axboe <axboe@kernel.dk>

The size of a submission queue element should always be 6 (64 bytes)
by spec.

However some controllers such as Apple's are not properly implementing
the standard and require a different size.

This provides the ground work for the subsequent quirks for these
controllers.
Signed-off-by: NBenjamin Herrenschmidt <benh@kernel.crashing.org>
Reviewed-by: NMinwoo Im <minwoo.im.dev@gmail.com>
Reviewed-by: NChristoph Hellwig <hch@lst.de>
Signed-off-by: NSagi Grimberg <sagi@grimberg.me>

This patch adds Get LBA Status command's opcode to the macro that is
used by the trace feature.  Now we can see "get_lba_status" instead of
the opcode value itself.
Signed-off-by: NMinwoo Im <minwoo.im.dev@gmail.com>
Signed-off-by: NSagi Grimberg <sagi@grimberg.me>

NVMe 1.4 added Get LBA Status command with opcode 0x86.
Signed-off-by: NMinwoo Im <minwoo.im.dev@gmail.com>
Signed-off-by: NSagi Grimberg <sagi@grimberg.me>