pci_dac_set_dma_mask is currently completely unused.
Signed-off-by: NAdrian Bunk <bunk@stusta.de>
Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>

Now pci drivers can know when the system is going down without having to
add a reboot notifier event.
Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>

Converts remaining rtnetlink_link tables to use c99 designated
initializers to make greping a little bit easier.
Signed-off-by: NThomas Graf <tgraf@suug.ch>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Converts rtm_min and rtm_max arrays to use c99 designated
initializers for easier insertion of new message families.
RTM_GETMULTICAST and RTM_GETANYCAST did not have the minimal
message size specified which means that the netlink message
was parsed for routing attributes starting from the header.
Adds the proper minimal message sizes for these messages
(netlink header + common rtnetlink header) to fix this issue.
Signed-off-by: NThomas Graf <tgraf@suug.ch>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

RTM_MAX is currently set to the maximum reserverd message type plus one
thus being the cause of two bugs for new types being assigned a) given the
new family registers only the NEW command in its reserved block the array
size for per family entries is calculated one entry short and b) given the
new family registers all commands RTM_MAX would point to the first entry
of the block following this one and the rtnetlink receive path would accept
a message type for a nonexisting family.

This patch changes RTM_MAX to point to the maximum valid message type
by aligning it to the start of the next block and subtracting one.
Signed-off-by: NThomas Graf <tgraf@suug.ch>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Converts xfrm_msg_min and xfrm_dispatch to use c99 designated
initializers to make greping a little bit easier. Also replaces
two hardcoded message type with meaningful names.
Signed-off-by: NThomas Graf <tgraf@suug.ch>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Makes the type > XFRM_MSG_MAX check behave correctly to
protect access to xfrm_dispatch.
Signed-off-by: NThomas Graf <tgraf@suug.ch>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Another large rollup of various patches from Adrian which make things static
where they were needlessly exported.
Signed-off-by: NAndrew Morton <akpm@osdl.org>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

Some KernelDoc descriptions are updated to match the current code.
No code changes.
Signed-off-by: NMartin Waitz <tali@admingilde.org>
Signed-off-by: NAndrew Morton <akpm@osdl.org>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

I have recompiled Linux kernel 2.6.11.5 documentation for me and our
university students again.  The documentation could be extended for more
sources which are equipped by structured comments for recent 2.6 kernels.  I
have tried to proceed with that task.  I have done that more times from 2.6.0
time and it gets boring to do same changes again and again.  Linux kernel
compiles after changes for i386 and ARM targets.  I have added references to
some more files into kernel-api book, I have added some section names as well.
 So please, check that changes do not break something and that categories are
not too much skewed.

I have changed kernel-doc to accept "fastcall" and "asmlinkage" words reserved
by kernel convention.  Most of the other changes are modifications in the
comments to make kernel-doc happy, accept some parameters description and do
not bail out on errors.  Changed <pid> to @pid in the description, moved some
#ifdef before comments to correct function to comments bindings, etc.

You can see result of the modified documentation build at
  http://cmp.felk.cvut.cz/~pisa/linux/lkdb-2.6.11.tar.gz

Some more sources are ready to be included into kernel-doc generated
documentation.  Sources has been added into kernel-api for now.  Some more
section names added and probably some more chaos introduced as result of quick
cleanup work.
Signed-off-by: NPavel Pisa <pisa@cmp.felk.cvut.cz>
Signed-off-by: NMartin Waitz <tali@admingilde.org>
Signed-off-by: NAndrew Morton <akpm@osdl.org>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

This patch adds to the fbdev interface a set_cmap callback that allow the
driver to "batch" palette changes.  This is useful for drivers like
radeonfb which might require lenghtly workarounds on palette accesses, thus
allowing to factor out those workarounds efficiently.
Signed-off-by: NBenjamin Herrenschmidt <benh@kernel.crashing.org>
Signed-off-by: NAndrew Morton <akpm@osdl.org>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

Since we only access reiserfs_key ->u.k_offset_v2 guts in four helper
functions, we are free to sanitize those, as long as

- layout of the structure is unchanged (it's on-disk object)

- behaviour of these helpers is same as before.

Patch kills the mess with endianness-dependent bitfields and replaces them
with a single __le64.  Helpers are switched to straightforward shift/and/or.

Benefits:

- exact same definitions for little- and big-endian architectures; no ifdefs
  in sight.

- generate the same code on little-endian and improved on big-endian.

- doesn't rely on lousy bitfields handling in gcc codegenerator.

- happens to be standard C (unsigned long long is not a valid type for a
  bitfield; it's a gccism and not well-implemented one, at that).
Signed-off-by: NAl Viro <viro@parcelfarce.linux.theplanet.co.uk>
Cc: <reiserfs-dev@namesys.com>
Signed-off-by: NAndrew Morton <akpm@osdl.org>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

comp_short_keys() massaged into sane form, which kills the last place where
pointer to in_core_key (or any object containing such) would be cast to or
from something else.  At that point we are free to change layout of
in_core_key - nothing depends on it anymore.

So we drop the mess with union in there and simply use (unconditional) __u64
k_offset and __u8 k_type instead; places using in_core_key switched to those.
That gives _far_ better code than current mess - on all platforms.
Signed-off-by: NAl Viro <viro@parcelfarce.linux.theplanet.co.uk>
Cc: <reiserfs-dev@namesys.com>
Signed-off-by: NAndrew Morton <akpm@osdl.org>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

fixes for a couple of bugs exposed by the above: le32_to_cpu() used on 16bit
value and missing conversion in comparison of host- and little-endian values.
Signed-off-by: NAl Viro <viro@parcelfarce.linux.theplanet.co.uk>
Cc: <reiserfs-dev@namesys.com>
Signed-off-by: NAndrew Morton <akpm@osdl.org>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

little-endian objects annotated as such; again, obviously no changes of
resulting code, we only replace __u16 with __le16, etc.  in relevant places.
Signed-off-by: NAl Viro <viro@parcelfarce.linux.theplanet.co.uk>
Cc: <reiserfs-dev@namesys.com>
Signed-off-by: NAndrew Morton <akpm@osdl.org>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

struct reiserfs_key cloned; (currently) identical struct in_core_key added.
Places that expect host-endian data in reiserfs_key switched to in_core_key.
Basically, we get annotation of reiserfs_key users and keep the resulting tree
obviously equivalent to original.
Signed-off-by: NAl Viro <viro@parcelfarce.linux.theplanet.co.uk>
Cc: <reiserfs-dev@namesys.com>
Signed-off-by: NAndrew Morton <akpm@osdl.org>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

Bump autofs4 version so we know what's going on.
Signed-off-by: NIan Kent <raven@themaw.net>
Signed-off-by: NAndrew Morton <akpm@osdl.org>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

This patch adds a new function valid_signal() that tests if its argument is
a valid signal number.

The reasons for adding this new function are:

- some code currently testing _NSIG directly has off-by-one errors.
  Using this function instead avoids such errors.

- some code currently tests unsigned signal numbers for <0 which is
  pointless and generates warnings when building with gcc -W.  Using this
  function instead avoids such warnings.

I considered various places to add this function but eventually settled on
include/linux/signal.h as the most logical place for it.  If there's some
reason this is a bad choice then please let me know (hints as to a better
location are then welcome of course).
Signed-off-by: NJesper Juhl <juhl-lkml@dif.dk>
Signed-off-by: NAndrew Morton <akpm@osdl.org>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

Signed-off-by: NStephen Rothwell <sfr@canb.auug.org.au>
Signed-off-by: NAndrew Morton <akpm@osdl.org>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

The synchronize_kernel() primitive is used for quite a few different purposes:
waiting for RCU readers, waiting for NMIs, waiting for interrupts, and so on.
This makes RCU code harder to read, since synchronize_kernel() might or might
not have matching rcu_read_lock()s.  This patch creates a new
synchronize_rcu() that is to be used for RCU readers and a new
synchronize_sched() that is used for the rest.  These two new primitives
currently have the same implementation, but this is might well change with
additional real-time support.  Both new primitives are GPL-only, the old
primitive is deprecated.
Signed-off-by: NPaul E. McKenney <paulmck@us.ibm.com>
Signed-off-by: NAndrew Morton <akpm@osdl.org>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

Add a deprecated_for_modules macro that allows symbols to be deprecated only
when used by modules, as suggested by Andrew Morton some months back.
Signed-off-by: NPaul E. McKenney <paulmck@us.ibm.com>
Signed-off-by: NAndrew Morton <akpm@osdl.org>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

The attached patch moves the IRQ-related SA_xxx flags (namely, SA_PROBE,
SA_SAMPLE_RANDOM and SA_SHIRQ) from all the arch-specific headers to
linux/signal.h.  This looks like a left-over after the irq-handling code
was consolidated.  The code was moved to kernel/irq/*, but the flags are
still left per-arch.

Right now, adding a new IRQ flag to the arch-specific header, like this
patch does:
http://cvs.sourceforge.net/viewcvs.py/*checkout*/alsa/alsa-driver/utils/patches/pcsp-kernel-2.6.10-03.diff?rev=1.1
no longer works, it breaks the compilation for all other arches, unless you
add that flag to all the other arch-specific headers too.  So I think such
a clean-up makes sense.
Signed-off-by: NStas Sergeev <stsp@aknet.ru>
Signed-off-by: NAndrew Morton <akpm@osdl.org>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

Arrange for all kernel printks to be no-ops.  Only available if
CONFIG_EMBEDDED.

This patch saves about 375k on my laptop config and nearly 100k on minimal
configs.
Signed-off-by: NMatt Mackall <mpm@selenic.com>
Signed-off-by: NAndrew Morton <akpm@osdl.org>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

Add a pair of rlimits for allowing non-root tasks to raise nice and rt
priorities. Defaults to traditional behavior. Originally written by
Chris Wright.

The patch implements a simple rlimit ceiling for the RT (and nice) priorities
a task can set.  The rlimit defaults to 0, meaning no change in behavior by
default.  A value of 50 means RT priority levels 1-50 are allowed.  A value of
100 means all 99 privilege levels from 1 to 99 are allowed.  CAP_SYS_NICE is
blanket permission.

(akpm: see http://www.uwsg.iu.edu/hypermail/linux/kernel/0503.1/1921.html for
tips on integrating this with PAM).
Signed-off-by: NMatt Mackall <mpm@selenic.com>
Acked-by: NIngo Molnar <mingo@elte.hu>
Signed-off-by: NAndrew Morton <akpm@osdl.org>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

GCC 2.95 uses __va_copy instead of va_copy.  Handle it inside compiler.h
instead of in a casual file, and avoid the risk that this breaks with a newer
compiler (which it could do).
Signed-off-by: NPaolo 'Blaisorblade' Giarrusso <blaisorblade@yahoo.it>
Signed-off-by: NAndrew Morton <akpm@osdl.org>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

The specifications that talk about E820 map doesn't have an upper limit on
the number of e820 entries.  But, today's kernel has a hard limit of 32.
With increase in memory size, we are seeing the number of E820 entries
reaching close to 32.  Patch below bumps the number upto 128.

The patch changes the location of EDDBUF in zero-page (as it comes after E820).
As, EDDBUF is not used by boot loaders, this patch should not have any effect
on bootloader-setup code interface.

Patch covers both i386 and x86-64.

Tested on:
* grub booting bzImage
* lilo booting bzImage with EDID info enabled
* pxeboot of bzImage

Side-effect:
bss increases by ~ 2K and init.data increases by ~7.5K
on all systems, due to increase in size of static arrays.
Signed-off-by: NVenkatesh Pallipadi <venkatesh.pallipadi@intel.com>
Signed-off-by: NAndrew Morton <akpm@osdl.org>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

This patch adds the Intel ICH7DH and ICH7-M DH DID's to the irq.c and
pci_ids.h files.
Signed-off-by: N Jason Gaston <Jason.d.gaston@intel.com>
Signed-off-by: NAndrew Morton <akpm@osdl.org>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

This patch by Jaya Kumar introduces a generic infrastructure to deal with
x86 chipsets with nonstandard reset sequences, and adds support for the
Geode gx1/cs5530a chipset.
Signed-off-by: NJaya Kumar <jayalk@intworks.biz>
Signed-off-by: NH. Peter Anvin <hpa@zytor.com>
Signed-off-by: NAndrew Morton <akpm@osdl.org>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

This patch adds support for the special adb buttons of the aluminium
PowerBook G4.
Signed-off-by: NAndreas Jaggi <andreas.jaggi@waterwave.ch>
Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Cc: Paul Mackerras <paulus@samba.org>
Signed-off-by: NAndrew Morton <akpm@osdl.org>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

The patch makes the following function calls available to allocate memory
on a specific node without changing the basic operation of the slab
allocator:

 kmem_cache_alloc_node(kmem_cache_t *cachep, unsigned int flags, int node);
 kmalloc_node(size_t size, unsigned int flags, int node);

in a similar way to the existing node-blind functions:

 kmem_cache_alloc(kmem_cache_t *cachep, unsigned int flags);
 kmalloc(size, flags);

kmem_cache_alloc_node was changed to pass flags and the node information
through the existing layers of the slab allocator (which lead to some minor
rearrangements).  The functions at the lowest layer (kmem_getpages,
cache_grow) are already node aware.  Also __alloc_percpu can call
kmalloc_node now.

Performance measurements (using the pageset localization patch) yields:

w/o patches:
Tasks    jobs/min  jti  jobs/min/task      real       cpu
    1      484.27  100       484.2736     12.02      1.97   Wed Mar 30 20:50:43 2005
  100    25170.83   91       251.7083     23.12    150.10   Wed Mar 30 20:51:06 2005
  200    34601.66   84       173.0083     33.64    294.14   Wed Mar 30 20:51:40 2005
  300    37154.47   86       123.8482     46.99    436.56   Wed Mar 30 20:52:28 2005
  400    39839.82   80        99.5995     58.43    580.46   Wed Mar 30 20:53:27 2005
  500    40036.32   79        80.0726     72.68    728.60   Wed Mar 30 20:54:40 2005
  600    44074.21   79        73.4570     79.23    872.10   Wed Mar 30 20:55:59 2005
  700    44016.60   78        62.8809     92.56   1015.84   Wed Mar 30 20:57:32 2005
  800    40411.05   80        50.5138    115.22   1161.13   Wed Mar 30 20:59:28 2005
  900    42298.56   79        46.9984    123.83   1303.42   Wed Mar 30 21:01:33 2005
 1000    40955.05   80        40.9551    142.11   1441.92   Wed Mar 30 21:03:55 2005

with pageset localization and slab API patches:
Tasks    jobs/min  jti  jobs/min/task      real       cpu
    1      484.19  100       484.1930     12.02      1.98   Wed Mar 30 21:10:18 2005
  100    27428.25   92       274.2825     21.22    149.79   Wed Mar 30 21:10:40 2005
  200    37228.94   86       186.1447     31.27    293.49   Wed Mar 30 21:11:12 2005
  300    41725.42   85       139.0847     41.84    434.10   Wed Mar 30 21:11:54 2005
  400    43032.22   82       107.5805     54.10    582.06   Wed Mar 30 21:12:48 2005
  500    42211.23   83        84.4225     68.94    722.61   Wed Mar 30 21:13:58 2005
  600    40084.49   82        66.8075     87.12    873.11   Wed Mar 30 21:15:25 2005
  700    44169.30   79        63.0990     92.24   1008.77   Wed Mar 30 21:16:58 2005
  800    43097.94   79        53.8724    108.03   1155.88   Wed Mar 30 21:18:47 2005
  900    41846.75   79        46.4964    125.17   1303.38   Wed Mar 30 21:20:52 2005
 1000    40247.85   79        40.2478    144.60   1442.21   Wed Mar 30 21:23:17 2005
Signed-off-by: NChristoph Lameter <christoph@lameter.com>
Signed-off-by: NManfred Spraul <manfred@colorfullife.com>
Signed-off-by: NAndrew Morton <akpm@osdl.org>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

This is a patch for counting the number of pages for bounce buffers.  It's
shown in /proc/vmstat.

Currently, the number of bounce pages are not counted anywhere.  So, if
there are many bounce pages, it seems that there are leaked pages.  And
it's difficult for a user to imagine the usage of bounce pages.  So, it's
meaningful to show # of bouce pages.
Signed-off-by: NKAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com>
Signed-off-by: NAndrew Morton <akpm@osdl.org>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

Mempools have 2 problems.

The first is that mempool_alloc can possibly get stuck in __alloc_pages
when they should opt to fail, and take an element from their reserved pool.

The second is that it will happily eat emergency PF_MEMALLOC reserves
instead of going to their reserved pools.

Fix the first by passing __GFP_NORETRY in the allocation calls in
mempool_alloc.  Fix the second by introducing a __GFP_MEMPOOL flag which
directs the page allocator not to allocate from the reserve pool.
Signed-off-by: NAndrew Morton <akpm@osdl.org>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

Address bug #4508: there's potential for wraparound in the various places
where we perform RLIMIT_AS checking.

(I'm a bit worried about acct_stack_growth().  Are we sure that vma->vm_mm is
always equal to current->mm?  If not, then we're comparing some other
process's total_vm with the calling process's rlimits).
Signed-off-by: NAndrew Morton <akpm@osdl.org>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

Attached is a new patch that solves the issue of getting valid credentials 
into the LOGIN message. The current code was assuming that the audit context 
had already been copied. This is not always the case for LOGIN messages.

To solve the problem, the patch passes the task struct to the function that 
emits the message where it can get valid credentials.
Signed-off-by: NSteve Grubb <sgrubb@redhat.com>
Signed-off-by: NDavid Woodhouse <dwmw2@infradead.org>

Most audit control messages are sent over netlink.In order to properly
log the identity of the sender of audit control messages, we would like
to add the loginuid to the netlink_creds structure, as per the attached
patch.
Signed-off-by: NSerge Hallyn <serue@us.ibm.com>
Signed-off-by: NDavid Woodhouse <dwmw2@infradead.org>

Attached is a patch that corrects a signed/unsigned warning. I also noticed
that we needlessly init serial to 0. That only needs to occur if the kernel
was compiled without the audit system.

-Steve Grubb
Signed-off-by: NDavid Woodhouse <dwmw2@infradead.org>

We were calling ptrace_notify() after auditing the syscall and arguments,
but the debugger could have _changed_ them before the syscall was actually
invoked. Reorder the calls to fix that.

While we're touching ever call to audit_syscall_entry(), we also make it
take an extra argument: the architecture of the syscall which was made,
because some architectures allow more than one type of syscall.

Also add an explicit success/failure flag to audit_syscall_exit(), for
the benefit of architectures which return that in a condition register
rather than only returning a single register.

Change type of syscall return value to 'long' not 'int'.
Signed-off-by: NDavid Woodhouse <dwmw2@infradead.org>

We log strings from userspace, such as arguments to open(). These could
be formatted to contain \n followed by fake audit log entries. Provide
a function for logging such strings, which gives a hex dump when the
string contains anything but basic printable ASCII characters. Use it
for logging filenames.
Signed-off-by: NDavid Woodhouse <dwmw2@infradead.org>

In order to properly fix some issues with cpufreq vs. sleep on
PowerBooks, I had to add a suspend callback to the pmac_cpufreq driver.
I must force a switch to full speed before sleep and I switch back to
previous speed on resume.

I also added a driver flag to disable the warnings in suspend/resume
since it is expected in this case to have different speed (and I want it
to fixup the jiffies properly).
Signed-off-by: NBenjamin Herrenschmidt <benh@kernel.crashing.org>
Signed-off-by: NAndrew Morton <akpm@osdl.org>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>